[  244.623346] e1000e 0000:00:19.0 eth1: NIC Link is Down
[  244.876616] wlan1: deauthenticating from 34:2c:c4:f5:e5:be by local choice (Reason: 3=DEAUTH_LEAVING)
[  245.680715] PM: suspend entry (deep)
[  245.715931] Filesystems sync: 0.035 seconds
[  245.832698] Freezing user space processes ... (elapsed 0.003 seconds) done.
[  245.836029] OOM killer disabled.
[  245.836030] Freezing remaining freezable tasks ... (elapsed 6.503 seconds) done.
[  252.339535] printk: Suspending console(s) (use no_console_suspend to debug)
[  252.399202] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  252.583390] e1000e: EEE TX LPI TIMER: 00000011
[  252.611961] sd 0:0:0:0: [sda] Stopping disk
[  252.668034] ACPI: EC: interrupt blocked
[  252.688676] ACPI: PM: Preparing to enter system sleep state S3
[  252.693350] ACPI: EC: event blocked
[  252.693354] ACPI: EC: EC stopped
[  252.693355] ACPI: PM: Saving platform NVS memory
[  252.693381] Disabling non-boot CPUs ...
[  252.695543] smpboot: CPU 1 is now offline
[  252.698950] smpboot: CPU 2 is now offline
[  252.701971] smpboot: CPU 3 is now offline
[  252.706428] ACPI: PM: Low-level resume complete
[  252.706458] ACPI: EC: EC started
[  252.706458] ACPI: PM: Restoring platform NVS memory
[  252.706821] Enabling non-boot CPUs ...
[  252.706862] x86: Booting SMP configuration:
[  252.706862] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  252.707675] CPU1 is up
[  252.707707] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  252.709722] CPU2 is up
[  252.709751] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  252.710516] CPU3 is up
[  252.712031] ACPI: PM: Waking up from system sleep state S3
[  252.718059] ACPI: EC: interrupt unblocked
[  252.739490] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit
[  252.739495] usb usb2: root hub lost power or was reset
[  252.739498] usb usb3: root hub lost power or was reset
[  252.740583] ACPI: EC: event unblocked
[  252.741977] sd 0:0:0:0: [sda] Starting disk
[  252.756729] tpm tpm0: TPM is disabled/deactivated (0x6)
[  252.994811] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  253.053791] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  253.066782] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  253.066790] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  253.068922] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[  253.074722] ata1.00: supports DRM functions and may not be fully accessible
[  253.124779] ata1.00: Security Log not supported
[  253.136855] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  253.136863] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  253.138956] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[  253.144717] ata1.00: supports DRM functions and may not be fully accessible
[  253.190875] usb 2-4: reset high-speed USB device number 2 using xhci_hcd
[  253.194770] ata1.00: Security Log not supported
[  253.194779] ata1.00: configured for UDMA/133
[  253.339123] usb 2-4: device firmware changed
[  253.466771] usb 1-1.8: reset high-speed USB device number 3 using ehci-pci
[  253.466883] usb 2-7: reset full-speed USB device number 4 using xhci_hcd
[  253.616996] OOM killer enabled.
[  253.616998] Restarting tasks ... 
[  253.617289] usb 2-4: USB disconnect, device number 2
[  253.617352] cdc_mbim 2-4:1.0 wwan0: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
[  253.635098] done.
[  253.636231] Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 2 week 3 2013
[  253.643981] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[  253.661528] PM: suspend exit
[  253.786731] usb 2-4: new high-speed USB device number 5 using xhci_hcd
[  253.834230] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[  253.850236] Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated
[  253.935975] usb 2-4: New USB device found, idVendor=8087, idProduct=0716, bcdDevice= 0.00
[  253.935981] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  253.937092] usb 2-6: USB disconnect, device number 3
[  254.062782] usb 2-6: new full-speed USB device number 6 using xhci_hcd
[  254.212028] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[  254.212042] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[  254.212047] usb 2-6: SerialNumber: 3c230842aa3d
[  254.316014] ACPI: \: failed to evaluate _DSM (0x1001)
[  254.316023] ACPI: \: failed to evaluate _DSM (0x1001)
[  254.316025] ACPI: \: failed to evaluate _DSM (0x1001)
[  254.316028] ACPI: \: failed to evaluate _DSM (0x1001)
[  254.857743] usbcore: registered new interface driver usbserial_generic
[  254.857763] usbserial: USB Serial support registered for generic
[  254.860959] usbcore: registered new interface driver usb_serial_simple
[  254.860971] usbserial: USB Serial support registered for carelink
[  254.860978] usbserial: USB Serial support registered for zio
[  254.860985] usbserial: USB Serial support registered for funsoft
[  254.860993] usbserial: USB Serial support registered for flashloader
[  254.861002] usbserial: USB Serial support registered for google
[  254.861019] usbserial: USB Serial support registered for libtransistor
[  254.861025] usbserial: USB Serial support registered for vivopay
[  254.861032] usbserial: USB Serial support registered for moto_modem
[  254.861040] usbserial: USB Serial support registered for motorola_tetra
[  254.861048] usbserial: USB Serial support registered for nokia
[  254.861060] usbserial: USB Serial support registered for novatel_gps
[  254.861072] usbserial: USB Serial support registered for hp4x
[  254.861099] usbserial: USB Serial support registered for suunto
[  254.861111] usbserial: USB Serial support registered for siemens_mpi
[  254.861141] usb_serial_simple 2-4:1.0: flashloader converter detected
[  254.862498] usb 2-4: flashloader converter now attached to ttyUSB0
[  257.100236] usb 2-4: USB disconnect, device number 5
[  257.100707] flashloader ttyUSB0: flashloader converter now disconnected from ttyUSB0
[  257.100758] usb_serial_simple 2-4:1.0: device disconnected
[  257.678176] wlan1: authenticate with 34:2c:c4:f5:e5:be
[  257.684787] wlan1: send auth to 34:2c:c4:f5:e5:be (try 1/3)
[  257.706188] wlan1: authenticated
[  257.706696] wlan1: associate with 34:2c:c4:f5:e5:be (try 1/3)
[  257.743795] wlan1: RX AssocResp from 34:2c:c4:f5:e5:be (capab=0x511 status=0 aid=2)
[  257.745808] wlan1: associated
[  257.767860] wlan1: Limiting TX power to 14 (17 - 3) dBm as advertised by 34:2c:c4:f5:e5:be
[  257.835344] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  259.866721] usb 2-4: new high-speed USB device number 7 using xhci_hcd
[  260.022822] usb 2-4: New USB device found, idVendor=1199, idProduct=a001, bcdDevice=17.29
[  260.022828] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  260.022831] usb 2-4: Product: Sierra Wireless EM7345 4G LTE
[  260.022833] usb 2-4: Manufacturer: Sierra Wireless Inc.
[  260.022834] usb 2-4: SerialNumber: 013937000531424
[  260.078573] cdc_mbim 2-4:1.0: setting rx_max = 16384
[  260.079402] cdc_mbim 2-4:1.0: cdc-wdm0: USB WDM device
[  260.079869] cdc_mbim 2-4:1.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 5e:fa:2a:d8:5f:08
[  260.083303] cdc_acm 2-4:1.2: ttyACM0: USB ACM device