[ 0.000000] Linux version 2.6.24-11-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 21:26:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic) [ 0.000000] Command line: root=UUID=cfc0393e-2f05-425d-ab70-c29795efbfcc ro quiet splash locale=de_DE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077e70000 (usable) [ 0.000000] BIOS-e820: 0000000077e70000 - 0000000077e81000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077e81000 - 0000000077f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 491120) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8750 checksum 0 [ 0.000000] ACPI: RSDP 000F8750, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 77E7A555, 0040 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: FACP 77E80B9A, 0074 (r1 ATI Bowfin 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 77E7A595, 6605 (r1 ATI SB600 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 77E91FC0, 0040 [ 0.000000] ACPI: TCPA 77E80C0E, 0032 (r2 AMD 6040000 PTEC 0) [ 0.000000] ACPI: SSDT 77E80C40, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 77E80DC2, 0054 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 77E80E16, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 77E80E52, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: SLIC 77E80E8A, 0176 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: DMI detected: Dell [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077e70000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 491120) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000077e70000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 491120 [ 0.000000] On node 0 totalpages: 491021 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1211 pages reserved [ 0.000000] DMA zone: 2730 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6658 pages used for memmap [ 0.000000] DMA32 zone: 480366 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 483096 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=cfc0393e-2f05-425d-ab70-c29795efbfcc ro quiet splash locale=de_DE [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 18.961412] Marking TSC unstable due to TSCs unsynchronized [ 18.961414] time.c: Detected 1595.994 MHz processor. [ 18.962305] Console: colour VGA+ 80x25 [ 18.962308] console [tty0] enabled [ 18.962327] Checking aperture... [ 18.962330] CPU 0: aperture @ 6976000000 size 32 MB [ 18.962332] Aperture too small (32 MB) [ 18.972957] No AGP bridge found [ 18.992066] Memory: 1924784k/1964480k available (2465k kernel code, 39300k reserved, 1310k data, 316k init) [ 18.992104] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 19.071292] Calibrating delay using timer specific routine.. 3194.87 BogoMIPS (lpj=6389749) [ 19.071325] Security Framework initialized [ 19.071332] SELinux: Disabled at boot. [ 19.071347] AppArmor: AppArmor initialized [ 19.071352] Failure registering capabilities with primary security module. [ 19.071544] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 19.072800] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.073387] Mount-cache hash table entries: 256 [ 19.073530] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.073533] CPU: L2 Cache: 256K (64 bytes/line) [ 19.073536] CPU 0/0 -> Node 0 [ 19.073538] CPU: Physical Processor ID: 0 [ 19.073539] CPU: Processor Core ID: 0 [ 19.073567] SMP alternatives: switching to UP code [ 19.074232] Early unpacking initramfs... done [ 19.448434] ACPI: Core revision 20070126 [ 19.448505] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.525009] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 20.565060] Using local APIC timer interrupts. [ 20.627661] APIC timer calibration result 12468699 [ 20.627663] Detected 12.468 MHz APIC timer. [ 20.627772] SMP alternatives: switching to SMP code [ 20.628334] Booting processor 1/2 APIC 0x1 [ 20.638809] Initializing CPU#1 [ 20.716012] Calibrating delay using timer specific routine.. 3192.00 BogoMIPS (lpj=6384002) [ 20.716019] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 20.716022] CPU: L2 Cache: 256K (64 bytes/line) [ 20.716024] CPU 1/1 -> Node 0 [ 20.716026] CPU: Physical Processor ID: 0 [ 20.716028] CPU: Processor Core ID: 1 [ 20.716101] AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 [ 20.716116] AMD C1E detected late. Force timer broadcast. [ 20.715779] Brought up 2 CPUs [ 20.715869] CPU0 attaching sched-domain: [ 20.715872] domain 0: span 03 [ 20.715874] groups: 01 02 [ 20.715878] domain 1: span 03 [ 20.715879] groups: 03 [ 20.715882] CPU1 attaching sched-domain: [ 20.715884] domain 0: span 03 [ 20.715885] groups: 02 01 [ 20.715888] domain 1: span 03 [ 20.715890] groups: 03 [ 20.716172] net_namespace: 120 bytes [ 20.716680] Time: 13:47:18 Date: 03/03/08 [ 20.716742] NET: Registered protocol family 16 [ 20.716969] ACPI: bus type pci registered [ 20.717055] PCI: Using configuration type 1 [ 20.718328] ACPI: EC: Look up EC in DSDT [ 20.721116] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 20.721436] ACPI: Interpreter enabled [ 20.721440] ACPI: (supports S0 S3 S4 S5) [ 20.721454] ACPI: Using IOAPIC for interrupt routing [ 20.722366] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 20.732902] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62 [ 20.732906] ACPI: EC: driver started in interrupt mode [ 20.732959] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.733193] pci 0000:00:12.0: set SATA to AHCI mode [ 20.734567] PCI: Transparent bridge - 0000:00:14.4 [ 20.734597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.734831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 20.734975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 20.735139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 20.735268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 20.738915] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 20.739060] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 20.739201] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 20.739341] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 20.739482] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 20.739622] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 20.739763] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 20.739904] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 20.740045] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. [ 20.740202] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.740245] pnp: PnP ACPI init [ 20.740253] ACPI: bus type pnp registered [ 20.743544] pnp: PnP ACPI: found 11 devices [ 20.743548] ACPI: ACPI bus type pnp unregistered [ 20.743880] PCI: Using ACPI for IRQ routing [ 20.743883] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.743890] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 20.743893] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 20.760099] NET: Registered protocol family 8 [ 20.760101] NET: Registered protocol family 20 [ 20.760219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 20.760224] hpet0: 4 32-bit timers, 14318180 Hz [ 20.761292] AppArmor: AppArmor Filesystem Enabled [ 20.763661] Time: hpet clocksource has been installed. [ 20.763669] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. [ 20.764101] Could not switch to high resolution mode on CPU 1 [ 20.763679] lapic is not functional. [ 20.763681] Could not switch to high resolution mode on CPU 0 [ 20.772131] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.772135] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 20.772138] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 20.772150] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 20.772153] system 00:08: ioport range 0x220-0x22f has been reserved [ 20.772156] system 00:08: ioport range 0x40b-0x40b has been reserved [ 20.772159] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 20.772162] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 20.772165] system 00:08: ioport range 0x530-0x537 has been reserved [ 20.772168] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 20.772171] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 20.772174] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 20.772177] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 20.772180] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 20.772183] system 00:08: ioport range 0xcd0-0xcd3 has been reserved [ 20.772186] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 20.772189] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 20.772192] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 20.772195] system 00:08: ioport range 0x8000-0x805f has been reserved [ 20.772198] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 20.772202] system 00:08: ioport range 0x87f-0x87f has been reserved [ 20.772210] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 20.772213] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 20.772217] system 00:09: iomem range 0xc0004800-0xc0004bff has been reserved [ 20.772220] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 20.772223] system 00:09: iomem range 0x0-0xfff could not be reserved [ 20.772758] PCI: Bridge: 0000:00:01.0 [ 20.772761] IO window: 9000-9fff [ 20.772764] MEM window: c0100000-c01fffff [ 20.772767] PREFETCH window: c8000000-cfffffff [ 20.772770] PCI: Bridge: 0000:00:05.0 [ 20.772771] IO window: disabled. [ 20.772774] MEM window: disabled. [ 20.772776] PREFETCH window: disabled. [ 20.772779] PCI: Bridge: 0000:00:06.0 [ 20.772780] IO window: disabled. [ 20.772783] MEM window: c0200000-c02fffff [ 20.772785] PREFETCH window: disabled. [ 20.772789] PCI: Bridge: 0000:00:14.4 [ 20.772790] IO window: disabled. [ 20.772796] MEM window: c0300000-c03fffff [ 20.772800] PREFETCH window: disabled. [ 20.772824] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 20.772832] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 20.772920] NET: Registered protocol family 2 [ 20.816181] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 20.817192] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 20.819604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 20.820197] TCP: Hash tables configured (established 262144 bind 65536) [ 20.820201] TCP reno registered [ 20.832194] checking if image is initramfs... it is [ 21.564881] Freeing initrd memory: 7398k freed [ 21.570130] audit: initializing netlink socket (disabled) [ 21.570146] audit(1204552037.488:1): initialized [ 21.572552] VFS: Disk quotas dquot_6.5.1 [ 21.572639] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 21.572787] io scheduler noop registered [ 21.572790] io scheduler anticipatory registered [ 21.572792] io scheduler deadline registered [ 21.572916] io scheduler cfq registered (default) [ 21.572922] PCI: MSI quirk detected. MSI deactivated. [ 21.573916] Boot video device is 0000:01:05.0 [ 21.574114] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 21.574136] assign_interrupt_mode Found MSI capability [ 21.574139] Allocate Port Service[0000:00:05.0:pcie00] [ 21.574179] Allocate Port Service[0000:00:05.0:pcie02] [ 21.574244] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 21.574265] assign_interrupt_mode Found MSI capability [ 21.574268] Allocate Port Service[0000:00:06.0:pcie00] [ 21.574302] Allocate Port Service[0000:00:06.0:pcie02] [ 21.607025] Real Time Clock Driver v1.12ac [ 21.607232] hpet_resources: 0xfed00000 is busy [ 21.607255] Linux agpgart interface v0.102 [ 21.607258] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.608512] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.608592] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 21.608707] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 21.612855] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.612866] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.631360] mice: PS/2 mouse device common for all mice [ 21.631413] cpuidle: using governor ladder [ 21.631416] cpuidle: using governor menu [ 21.631567] NET: Registered protocol family 1 [ 21.631646] registered taskstats version 1 [ 21.631789] Magic number: 0:818:785 [ 21.631880] hash matches device ptyq7 [ 21.631922] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 21.631925] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.631927] EDD information not available. [ 21.631940] Freeing unused kernel memory: 316k freed [ 21.671282] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 22.904602] fuse init (API version 7.9) [ 22.915944] ACPI: Processor [CPU0] (supports 8 throttling states) [ 22.918760] ACPI: Thermal Zone [THRM] (45 C) [ 23.106041] SCSI subsystem initialized [ 23.133777] libata version 3.00 loaded. [ 23.139174] ahci 0000:00:12.0: version 3.0 [ 23.139209] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 23.139334] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 23.139341] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 23.415693] usbcore: registered new interface driver usbfs [ 23.415719] usbcore: registered new interface driver hub [ 23.416467] usbcore: registered new device driver usb [ 23.425688] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.425695] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 24.140536] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 24.140542] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 24.140995] scsi0 : ahci [ 24.141058] scsi1 : ahci [ 24.141099] scsi2 : ahci [ 24.141140] scsi3 : ahci [ 24.141240] ata1: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22 [ 24.141244] ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22 [ 24.141248] ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22 [ 24.141252] ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22 [ 24.616053] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.664756] ata1.00: ATA-7: WDC WD800BEVS-75RST0, 04.01G04, max UDMA/133 [ 24.664762] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 24.665571] ata1.00: configured for UDMA/133 [ 24.975705] ata2: SATA link down (SStatus 0 SControl 300) [ 25.287409] ata3: SATA link down (SStatus 0 SControl 300) [ 25.599110] ata4: SATA link down (SStatus 0 SControl 300) [ 25.599237] scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVS-75 04.0 PQ: 0 ANSI: 5 [ 25.599765] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [ 25.599791] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.599803] SB600_PATA: not 100% native mode: will probe irqs later [ 25.599812] ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio [ 25.599827] Probing IDE interface ide0... [ 25.615060] Driver 'sd' needs updating - please use bus_type methods [ 25.615538] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 25.615552] sd 0:0:0:0: [sda] Write Protect is off [ 25.615555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.615573] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.615631] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 25.615642] sd 0:0:0:0: [sda] Write Protect is off [ 25.615644] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.615661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.615665] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 25.666865] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.671884] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.986519] Attempting manual resume [ 25.986524] swsusp: Resume From Partition 8:5 [ 25.986526] PM: Checking swsusp image. [ 25.986758] PM: Resume from disk failed. [ 26.031359] kjournald starting. Commit interval 5 seconds [ 26.031762] EXT3-fs: mounted filesystem with ordered data mode. [ 27.006534] hda: Optiarc DVD+/-RW AD-5540A, ATAPI CD/DVD-ROM drive [ 27.006574] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 27.006861] hda: UDMA/33 mode selected [ 27.007080] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 27.008017] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [ 27.008137] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 27.008525] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 27.008577] ehci_hcd 0000:00:13.5: debug port 1 [ 27.008595] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 [ 27.017749] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 27.017883] usb usb1: configuration #1 chosen from 1 choice [ 27.017910] hub 1-0:1.0: USB hub found [ 27.017916] hub 1-0:1.0: 10 ports detected [ 27.122147] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 27.122161] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 27.163801] ssb: SPROM revision 2 detected. [ 27.182049] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 33.535630] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 33.635986] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.688224] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.831401] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 33.897145] input: Power Button (FF) as /devices/virtual/input/input2 [ 33.922290] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.922350] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 33.922465] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 33.922537] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 33.922563] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 [ 33.951207] ACPI: Power Button (FF) [PWRF] [ 33.951285] input: Power Button (CM) as /devices/virtual/input/input3 [ 33.975257] usb usb2: configuration #1 chosen from 1 choice [ 33.975294] hub 2-0:1.0: USB hub found [ 33.975305] hub 2-0:1.0: 2 ports detected [ 34.015120] ACPI: Power Button (CM) [PWRB] [ 34.015239] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 34.079143] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 34.079261] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 34.079333] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 34.079361] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 [ 34.079410] ACPI: Sleep Button (CM) [SLPB] [ 34.079479] input: Lid Switch as /devices/virtual/input/input5 [ 34.128755] ACPI: Lid Switch [LID] [ 34.129722] ACPI: AC Adapter [ACAD] (on-line) [ 34.130545] ACPI: Battery Slot [BAT1] (battery absent) [ 34.130576] ACPI: WMI-Acer: Mapper loaded [ 34.135102] usb usb3: configuration #1 chosen from 1 choice [ 34.135131] hub 3-0:1.0: USB hub found [ 34.135142] hub 3-0:1.0: 2 ports detected [ 34.238960] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 34.239075] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 34.239156] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 34.239181] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 [ 34.239485] ricoh-mmc: Ricoh MMC Controller disabling driver [ 34.239488] ricoh-mmc: Copyright(c) Philip Langdale [ 34.294945] usb usb4: configuration #1 chosen from 1 choice [ 34.294977] hub 4-0:1.0: USB hub found [ 34.294988] hub 4-0:1.0: 2 ports detected [ 34.398119] sdhci: Secure Digital Host Controller Interface driver [ 34.398124] sdhci: Copyright(c) Pierre Ossman [ 34.399130] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 34.399248] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 34.399325] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 34.399350] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 [ 34.454798] usb usb5: configuration #1 chosen from 1 choice [ 34.454830] hub 5-0:1.0: USB hub found [ 34.454841] hub 5-0:1.0: 2 ports detected [ 34.558667] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [ 34.558782] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 34.558859] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 34.558879] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 [ 34.614634] usb usb6: configuration #1 chosen from 1 choice [ 34.614667] hub 6-0:1.0: USB hub found [ 34.614678] hub 6-0:1.0: 2 ports detected [ 34.644141] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 [ 34.674018] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/LNXVIDEO:00/input/input6 [ 34.679396] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 34.718638] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 34.734102] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 34.761694] ssb: SPROM revision 16 detected. [ 34.778419] ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0 [ 34.778457] b44.c:v2.0 [ 34.798686] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:59:5c:a0 [ 34.798723] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.1 [1180:0843] (rev 1) [ 34.798729] ricoh-mmc: Main firewire function not found. Cannot disable controller. [ 34.798765] sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) [ 34.798792] ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 34.798918] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 34.799024] mmc0: SDHCI at 0xc0302800 irq 20 DMA [ 34.866923] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.990766] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 34.990777] Uniform CD-ROM driver Revision: 3.20 [ 35.093679] b43-phy0: Broadcom 4311 WLAN found [ 35.161111] phy0: Selected rate control algorithm 'simple' [ 37.421694] lp: driver loaded but no devices found [ 37.588679] Adding 2048276k swap on /dev/sda5. Priority:-1 extents:1 across:2048276k [ 38.169872] EXT3 FS on sda1, internal journal [ 39.697865] kjournald starting. Commit interval 5 seconds [ 39.698112] EXT3 FS on sda2, internal journal [ 39.698117] EXT3-fs: mounted filesystem with ordered data mode. [ 39.736324] kjournald starting. Commit interval 5 seconds [ 39.736526] EXT3 FS on sda3, internal journal [ 39.736530] EXT3-fs: mounted filesystem with ordered data mode. [ 39.832453] kjournald starting. Commit interval 5 seconds [ 39.832699] EXT3 FS on sda6, internal journal [ 39.832703] EXT3-fs: mounted filesystem with ordered data mode. [ 40.427591] ip_tables: (C) 2000-2006 Netfilter Core Team [ 40.965025] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 40.995354] No dock devices found. [ 41.360016] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00) [ 41.359709] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 [ 41.359714] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e [ 42.736071] NET: Registered protocol family 10 [ 42.736342] lo: Disabled Privacy Extensions [ 42.891057] ppdev: user-space parallel port driver [ 43.278162] audit(1204552061.053:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5082 profile="/usr/sbin/cupsd" namespace="default" [ 43.955852] Clocksource tsc unstable (delta = -109766770 ns) [ 44.740087] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.779283] input: b43-phy0 as /devices/virtual/input/input8 [ 44.812970] Bluetooth: Core ver 2.11 [ 44.813732] NET: Registered protocol family 31 [ 44.813737] Bluetooth: HCI device and connection manager initialized [ 44.813742] Bluetooth: HCI socket layer initialized [ 44.841602] Bluetooth: L2CAP ver 2.9 [ 44.841609] Bluetooth: L2CAP socket layer initialized [ 44.918510] Bluetooth: RFCOMM socket layer initialized [ 44.918527] Bluetooth: RFCOMM TTY layer initialized [ 44.918529] Bluetooth: RFCOMM ver 1.8 [ 45.563336] Registered led device: b43-phy0:tx [ 45.563884] Registered led device: b43-phy0:rx [ 45.564325] Registered led device: b43-phy0:radio [ 45.605732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 57.319703] hda-intel: Invalid position buffer, using LPIB read method instead. [ 82.717984] CPU0 attaching NULL sched-domain. [ 82.717993] CPU1 attaching NULL sched-domain. [ 82.728448] CPU0 attaching sched-domain: [ 82.728452] domain 0: span 03 [ 82.728455] groups: 01 02 [ 82.728458] domain 1: span 03 [ 82.728461] groups: 03 [ 82.728463] CPU1 attaching sched-domain: [ 82.728465] domain 0: span 03 [ 82.728466] groups: 02 01 [ 82.728469] domain 1: span 03 [ 82.728471] groups: 03 [ 92.429413] NET: Registered protocol family 17 [ 134.880918] input: b43-phy0 as /devices/virtual/input/input9 [ 135.744488] Registered led device: b43-phy0:tx [ 135.745068] Registered led device: b43-phy0:rx [ 135.745500] Registered led device: b43-phy0:radio [ 135.788989] ADDRCONF(NETDEV_UP): wlan0: link is not ready