The "Kinetic Ubuntu 22.10" version is also affected. Backport from fix from comment #33 above? ( https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1970074/comments/33 ) Please someone who has permission could you please add Kinect as affected and backport the fix? (google translated) $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.10 Release: 22.10 Codename: kinetic $ dmesg [ 0.000000] Linux version 5.19.0-26-generic (buildd@lcy02-amd64-064) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.2.0-3ubuntu1) 12.2.0, GNU ld (GNU Binutils for Ubuntu) 2.39) #27-Ubuntu SMP PREEMPT_DYNAMIC Wed Nov 23 20:44:15 UTC 2022 (Ubuntu 5.19.0-26.27-generic 5.19.7) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.19.0-26-generic root=UUID=5e0045ff-af35-44d7-9627-375f9c38f04b ro debug verbose zswap.enabled=1 kernel.dmesg_restrict=0 [ 0.000000] KERNEL supported cpus: [...] [ 1.970929] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.974948] ACPI: \_SB_.LMAC: Enabled at IRQ 23 [ 1.980418] scsi host0: pata_amd [ 1.984037] ahci 0000:00:09.0: version 3.0 [ 1.987817] ACPI: \_SB_.LSA0: Enabled at IRQ 22 [ 1.993080] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 1.997510] scsi host1: pata_amd [ 2.001022] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.004572] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.008363] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl IDE mode [ 2.011924] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh [ 2.020446] scsi host2: ahci [ 2.028066] scsi host3: ahci [ 2.031849] scsi host4: ahci [ 2.036045] scsi host5: ahci [ 2.039550] scsi host6: ahci [ 2.042923] scsi host7: ahci [ 2.046161] ata3: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76100 irq 25 [ 2.049439] ata4: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76180 irq 25 [ 2.052707] ata5: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76200 irq 25 [ 2.055964] ata6: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76280 irq 25 [ 2.059214] ata7: DUMMY [ 2.062446] ata8: DUMMY [ 2.066781] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 90:e6:ba:7c:6e:0b [ 2.070154] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 2.073884] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled [ 2.077385] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.080820] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.084840] scsi host8: ahci [ 2.088504] scsi host9: ahci [ 2.092002] ata9: SATA max UDMA/133 abar m512@0xfbfffc00 port 0xfbfffd00 irq 26 [ 2.095432] ata10: SATA max UDMA/133 abar m512@0xfbfffc00 port 0xfbfffd80 irq 26 [ 2.131689] usb 3-1: New USB device found, idVendor=03f0, idProduct=034a, bcdDevice= 1.21 [ 2.135300] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.138833] usb 3-1: Product: HP Elite USB Keyboard [ 2.139693] usb 4-1: New USB device found, idVendor=03f0, idProduct=1198, bcdDevice= 7.04 [ 2.142341] usb 3-1: Manufacturer: Chicony [ 2.149360] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.152946] usb 4-1: Product: HP USB 1000dpi Laser Mouse [ 2.156475] usb 4-1: Manufacturer: HP [ 2.161666] hid: raw HID events driver (C) Jiri Kosina [ 2.215911] usbcore: registered new interface driver usbhid [ 2.219667] usbhid: USB HID core driver [ 2.381945] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.390289] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.399061] ata5: SATA link down (SStatus 0 SControl 300) [ 2.407325] ata3: SATA link down (SStatus 0 SControl 300) [ 2.415502] ata4.00: ATA-9: SATA3 240GB SSD, T0707B0, max UDMA/133 [ 2.424371] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32) [ 2.434698] ata6.00: ATA-9: KingDian S400 120GB, Q1115A0, max UDMA/133 [ 2.443235] ata6.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32) [ 2.452933] ata4.00: configured for UDMA/133 [ 2.462504] scsi 3:0:0:0: Direct-Access ATA SATA3 240GB SSD 7B0 PQ: 0 ANSI: 5 [ 2.466643] ata6.00: configured for UDMA/133 [ 2.471984] scsi 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.472586] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.472630] sd 3:0:0:0: [sda] Write Protect is off [ 2.472638] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.472696] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.472731] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.526709] scsi 5:0:0:0: Direct-Access ATA KingDian S400 12 5A0 PQ: 0 ANSI: 5 [ 2.530967] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 2.531321] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.540329] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.542609] sd 5:0:0:0: [sdb] Write Protect is off [ 2.551154] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.557825] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.568721] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.572155] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 2.578654] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.582020] ================================================================================ [ 2.585414] UBSAN: array-index-out-of-bounds in /build/linux-ke3rPq/linux-5.19.0/drivers/ata/libahci.c:986:41 [ 2.588865] index 15 is out of range for type 'ahci_em_priv [8]' [ 2.592366] CPU: 2 PID: 208 Comm: scsi_eh_8 Not tainted 5.19.0-26-generic #27-Ubuntu [ 2.595888] Hardware name: System manufacturer System Product Name/M4N78 SE, BIOS 1501 10/09/2012 [ 2.599457] Call Trace: [ 2.602975] [ 2.606503] show_stack+0x4e/0x61 [ 2.610066] dump_stack_lvl+0x4a/0x6d [ 2.613654] dump_stack+0x10/0x18 [ 2.617247] ubsan_epilogue+0x9/0x43 [ 2.620868] __ubsan_handle_out_of_bounds.cold+0x42/0x47 [ 2.624491] ahci_qc_issue+0x17e/0x190 [libahci] [ 2.628150] ata_qc_issue+0x138/0x2d0 [ 2.631821] ata_exec_internal_sg+0x2b5/0x5b0 [ 2.635533] ata_exec_internal+0x84/0xd0 [ 2.639194] sata_pmp_read+0x8d/0xd0 [ 2.642876] sata_pmp_read_gscr+0x3b/0x80 [ 2.646504] sata_pmp_attach+0x71/0x2e0 [ 2.650100] ? ata_eh_reset+0x564/0x11b0 [ 2.653651] ata_eh_revalidate_and_attach+0x276/0x4b0 [ 2.657203] ? ahci_do_hardreset+0x180/0x180 [libahci] [ 2.660738] ata_eh_recover+0x691/0xa80 [ 2.664230] ? ahci_do_softreset+0x240/0x240 [libahci] [ 2.667777] ? ahci_stop_engine+0xc0/0xc0 [libahci] [ 2.671296] ? ahci_do_hardreset+0x180/0x180 [libahci] [ 2.674787] ? ata_id_n_sectors+0xc0/0xc0 [ 2.678220] ? __flush_work.isra.0+0x1c4/0x2a0 [ 2.681638] ? update_load_avg+0x82/0x7b0 [ 2.685027] sata_pmp_eh_recover.isra.0+0xe7/0x4c0 [ 2.688397] sata_pmp_error_handler+0x22/0x40 [ 2.691716] ahci_error_handler+0x45/0x90 [libahci] [ 2.695029] ata_scsi_port_error_handler+0x2ab/0x5f0 [ 2.698322] ata_scsi_error+0x95/0xd0 [ 2.701596] scsi_error_handler+0x98/0x190 [ 2.704865] ? scsi_unjam_host+0x1d0/0x1d0 [ 2.706613] usb 4-4: new full-speed USB device number 3 using ohci-pci [ 2.708103] kthread+0xe9/0x110 [ 2.708107] ? kthread_complete_and_exit+0x20/0x20 [ 2.708110] ret_from_fork+0x22/0x30 [ 2.708114] [ 2.724555] ================================================================================ [ 2.727968] usb 3-2: new low-speed USB device number 3 using ohci-pci [ 2.729477] ata9.15: Port Multiplier 1.2, 0x197b:0x5755 r0, 5 ports, feat 0x5/0xf [ 2.735451] sdb: sdb1 sdb2 sdb3 [ 2.736391] ata9.00: hard resetting link [ 2.743886] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.956727] usb 4-4: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02 [ 2.965132] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.973484] usb 4-4: Product: USB Hub 2.0 [...]