[ 0.000000] Linux version 2.6.24-10-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Fri Feb 22 19:08:18 UTC 2008 (Ubuntu 2.6.24-10.16-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 6400 pages used for memmap [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FA4C0 checksum 0 [ 0.000000] ACPI: RSDP 000FA4C0, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT BFF80100, 0064 (r1 NEC 3000701 MSFT 97) [ 0.000000] ACPI: FACP BFF80290, 00F4 (r3 A_M_I_ OEMFACP 3000701 MSFT 97) [ 0.000000] ACPI: DSDT BFF805A0, 94F9 (r1 A0520 A0520000 0 INTL 20060113) [ 0.000000] ACPI: FACS BFF8E000, 0040 [ 0.000000] ACPI: APIC BFF80390, 008C (r1 A_M_I_ OEMAPIC 3000701 MSFT 97) [ 0.000000] ACPI: SLIC BFF80420, 0176 (r1 NEC 3000701 MSFT 97) [ 0.000000] ACPI: OEMB BFF8E040, 006B (r1 A_M_I_ AMI_OEM 3000701 MSFT 97) [ 0.000000] ACPI: HPET BFF89AA0, 0038 (r1 A_M_I_ OEMHPET 3000701 MSFT 97) [ 0.000000] ACPI: MCFG BFF89AE0, 003C (r1 A_M_I_ OEMMCFG 3000701 MSFT 97) [ 0.000000] ACPI: SSDT BFF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) [ 0.000000] ACPI: SSDT BFF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e5000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e5000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 [ 0.000000] Kernel command line: root=/dev/md0 ro single [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] mapped IOAPIC to ffff9000 (fec10000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2404.144 MHz processor. [ 48.425633] Console: colour VGA+ 80x25 [ 48.425636] console [tty0] enabled [ 48.427923] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 48.428147] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 48.570882] Memory: 3098868k/4194304k available (2163k kernel code, 45112k reserved, 1003k data, 364k init, 2227712k highmem) [ 48.570927] virtual kernel memory layout: [ 48.570928] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 48.570929] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 48.570929] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 48.570930] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 48.570931] .init : 0xc041d000 - 0xc0478000 ( 364 kB) [ 48.570932] .data : 0xc031cf6d - 0xc0417dc4 (1003 kB) [ 48.570932] .text : 0xc0100000 - 0xc031cf6d (2163 kB) [ 48.571182] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 48.571277] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 48.571418] hpet clockevent registered [ 48.651246] Calibrating delay using timer specific routine.. 4811.70 BogoMIPS (lpj=9623411) [ 48.651326] Security Framework initialized [ 48.651361] SELinux: Disabled at boot. [ 48.651403] AppArmor: AppArmor initialized [ 48.651437] Failure registering capabilities with primary security module. [ 48.651475] Mount-cache hash table entries: 512 [ 48.651604] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 48.651610] monitor/mwait feature present. [ 48.651642] using mwait in idle threads. [ 48.651675] CPU: L1 I cache: 32K, L1 D cache: 32K [ 48.651732] CPU: L2 cache: 2048K [ 48.651763] CPU: Physical Processor ID: 0 [ 48.651795] CPU: Processor Core ID: 0 [ 48.651826] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 48.651833] Compat vDSO mapped to ffffe000. [ 48.651873] Checking 'hlt' instruction... OK. [ 48.667570] SMP alternatives: switching to UP code [ 48.668773] Early unpacking initramfs... done [ 48.889425] ACPI: Core revision 20070126 [ 48.889494] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 48.903825] CPU0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02 [ 48.903921] SMP alternatives: switching to SMP code [ 48.904475] Booting processor 1/1 eip 3000 [ 48.914588] Initializing CPU#1 [ 48.994484] Calibrating delay using timer specific routine.. 4808.24 BogoMIPS (lpj=9616490) [ 48.994488] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 48.994492] monitor/mwait feature present. [ 48.994494] CPU: L1 I cache: 32K, L1 D cache: 32K [ 48.994495] CPU: L2 cache: 2048K [ 48.994497] CPU: Physical Processor ID: 0 [ 48.994498] CPU: Processor Core ID: 1 [ 48.994499] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 48.994893] CPU1: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02 [ 48.995206] Total of 2 processors activated (9619.95 BogoMIPS). [ 48.995463] ENABLING IO-APIC IRQs [ 48.995653] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 49.142235] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 49.162258] Brought up 2 CPUs [ 49.162308] CPU0 attaching sched-domain: [ 49.162310] domain 0: span 03 [ 49.162311] groups: 01 02 [ 49.162313] CPU1 attaching sched-domain: [ 49.162314] domain 0: span 03 [ 49.162316] groups: 02 01 [ 49.162481] net_namespace: 64 bytes [ 49.162519] Booting paravirtualized kernel on bare hardware [ 49.162882] Time: 21:49:01 Date: 02/27/08 [ 49.162952] NET: Registered protocol family 16 [ 49.163123] EISA bus registered [ 49.163156] ACPI: bus type pci registered [ 49.163345] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9 [ 49.163378] PCI: Using configuration type 1 [ 49.163410] Setting up standard PCI resources [ 49.176053] ACPI: EC: Look up EC in DSDT [ 49.182125] ACPI: Interpreter enabled [ 49.182158] ACPI: (supports S0 S1 S3 S4 S5) [ 49.182323] ACPI: Using IOAPIC for interrupt routing [ 49.186955] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 49.187487] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 49.187521] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 49.188122] PCI: PXH quirk detected, disabling MSI for SHPC device [ 49.188703] PCI: Transparent bridge - 0000:00:1e.0 [ 49.188764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 49.188873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 49.188937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 49.189000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 49.189084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 49.189140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 49.189210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 49.189273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4.PXHA._PRT] [ 49.191435] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 49.191850] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 49.192263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 49.192674] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 49.193086] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 49.193499] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 49.193910] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 49.194379] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 49.194799] Linux Plug and Play Support v0.97 (c) Adam Belay [ 49.194854] pnp: PnP ACPI init [ 49.194889] ACPI: bus type pnp registered [ 49.196838] pnp: PnP ACPI: found 13 devices [ 49.196870] ACPI: ACPI bus type pnp unregistered [ 49.196904] PnPBIOS: Disabled by ACPI PNP [ 49.197105] PCI: Using ACPI for IRQ routing [ 49.197137] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 49.234035] NET: Registered protocol family 8 [ 49.234071] NET: Registered protocol family 20 [ 49.234137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 49.234281] hpet0: 3 64-bit timers, 14318180 Hz [ 49.235335] AppArmor: AppArmor Filesystem Enabled [ 49.238034] Time: tsc clocksource has been installed. [ 49.238078] Switched to high resolution mode on CPU 0 [ 49.238174] Switched to high resolution mode on CPU 1 [ 49.254037] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 49.254081] system 00:06: ioport range 0x290-0x297 has been reserved [ 49.254122] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 49.254159] system 00:07: ioport range 0x800-0x87f has been reserved [ 49.254202] system 00:07: ioport range 0x400-0x41f has been reserved [ 49.254235] system 00:07: ioport range 0x480-0x4bf has been reserved [ 49.254269] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 49.254302] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved [ 49.254336] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved [ 49.254375] system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved [ 49.254416] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 49.254450] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 49.254486] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved [ 49.254522] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 49.254555] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 49.254589] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 49.254623] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved [ 49.254661] system 00:0c: iomem range 0x0-0x0 could not be reserved [ 49.284956] PCI: Bridge: 0000:07:00.0 [ 49.284988] IO window: c000-cfff [ 49.285021] MEM window: ff800000-ff9fffff [ 49.285747] PREFETCH window: disabled. [ 49.285780] PCI: Bridge: 0000:07:00.2 [ 49.285811] IO window: disabled. [ 49.285844] MEM window: disabled. [ 49.285876] PREFETCH window: disabled. [ 49.285911] PCI: Bridge: 0000:00:01.0 [ 49.285942] IO window: c000-cfff [ 49.285975] MEM window: ff800000-ff9fffff [ 49.286007] PREFETCH window: disabled. [ 49.286040] PCI: Bridge: 0000:00:03.0 [ 49.286071] IO window: b000-bfff [ 49.286103] MEM window: ff700000-ff7fffff [ 49.286136] PREFETCH window: cff00000-efefffff [ 49.286169] PCI: Bridge: 0000:04:00.0 [ 49.286199] IO window: disabled. [ 49.286233] MEM window: disabled. [ 49.286266] PREFETCH window: disabled. [ 49.286300] PCI: Bridge: 0000:00:1c.0 [ 49.286331] IO window: disabled. [ 49.286364] MEM window: disabled. [ 49.286397] PREFETCH window: cfe00000-cfefffff [ 49.286431] PCI: Bridge: 0000:00:1c.4 [ 49.286463] IO window: a000-afff [ 49.286496] MEM window: ff600000-ff6fffff [ 49.286529] PREFETCH window: disabled. [ 49.286562] PCI: Bridge: 0000:00:1c.5 [ 49.286594] IO window: 9000-9fff [ 49.286628] MEM window: ff500000-ff5fffff [ 49.286660] PREFETCH window: disabled. [ 49.286695] PCI: Bridge: 0000:00:1e.0 [ 49.286727] IO window: 8000-8fff [ 49.286760] MEM window: ff400000-ff4fffff [ 49.286793] PREFETCH window: disabled. [ 49.286835] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.286899] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 49.286910] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 49.286921] PCI: Setting latency timer of device 0000:07:00.2 to 64 [ 49.286928] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.286992] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 49.287005] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.287069] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 49.287086] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 49.287100] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.287164] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 49.287178] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 49.287242] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 49.287250] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 49.287257] NET: Registered protocol family 2 [ 49.325897] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 49.326118] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 49.326490] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 49.326710] TCP: Hash tables configured (established 131072 bind 65536) [ 49.326743] TCP reno registered [ 49.337939] checking if image is initramfs... it is [ 49.772426] Freeing initrd memory: 7335k freed [ 49.773083] audit: initializing netlink socket (disabled) [ 49.773125] audit(1204148941.069:1): initialized [ 49.773356] highmem bounce pool size: 64 pages [ 49.774831] VFS: Disk quotas dquot_6.5.1 [ 49.774916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 49.775042] io scheduler noop registered [ 49.775074] io scheduler anticipatory registered [ 49.775105] io scheduler deadline registered [ 49.775143] io scheduler cfq registered (default) [ 49.775250] Boot video device is 0000:06:00.0 [ 49.775333] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 49.775360] assign_interrupt_mode Found MSI capability [ 49.775413] Allocate Port Service[0000:00:01.0:pcie00] [ 49.775471] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 49.775497] assign_interrupt_mode Found MSI capability [ 49.775548] Allocate Port Service[0000:00:03.0:pcie00] [ 49.775603] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 49.775635] assign_interrupt_mode Found MSI capability [ 49.775692] Allocate Port Service[0000:00:1c.0:pcie00] [ 49.775757] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 49.775789] assign_interrupt_mode Found MSI capability [ 49.775846] Allocate Port Service[0000:00:1c.4:pcie00] [ 49.775909] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 49.775941] assign_interrupt_mode Found MSI capability [ 49.775999] Allocate Port Service[0000:00:1c.5:pcie00] [ 49.776204] isapnp: Scanning for PnP cards... [ 50.128550] isapnp: No Plug & Play device found [ 50.146671] Real Time Clock Driver v1.12ac [ 50.146843] hpet_resources: 0xfed00000 is busy [ 50.146871] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 50.147758] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 50.147842] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 50.147948] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 50.147981] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 50.148465] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 50.168052] mice: PS/2 mouse device common for all mice [ 50.168199] EISA: Probing bus 0 at eisa.0 [ 50.168251] Cannot allocate resource for EISA slot 8 [ 50.168283] EISA: Detected 0 cards. [ 50.168315] cpuidle: using governor ladder [ 50.168346] cpuidle: using governor menu [ 50.168438] NET: Registered protocol family 1 [ 50.168490] Using IPI No-Shortcut mode [ 50.168541] registered taskstats version 1 [ 50.168665] Magic number: 12:21:855 [ 50.168727] hash matches device ptyv7 [ 50.168762] hash matches device ptysa [ 50.168814] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 50.168846] EDD information not available. [ 50.168997] Freeing unused kernel memory: 364k freed [ 50.192215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 50.279391] fuse init (API version 7.9) [ 50.286125] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node f7c46198), AE_ALREADY_EXISTS [ 50.286245] ACPI: Marking method _OSC as Serialized [ 50.286352] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f7c46180), AE_ALREADY_EXISTS [ 50.286468] ACPI: Marking method _PDC as Serialized [ 50.286805] ACPI: Processor [CPU1] (supports 8 throttling states) [ 50.287001] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node f7c46270), AE_ALREADY_EXISTS [ 50.287117] ACPI: Marking method _OSC as Serialized [ 50.287220] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f7c46258), AE_ALREADY_EXISTS [ 50.287335] ACPI: Marking method _PDC as Serialized [ 50.287685] ACPI: Processor [CPU2] (supports 8 throttling states) [ 50.287776] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 50.287871] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 50.301181] md: linear personality registered for level -1 [ 50.304504] md: multipath personality registered for level -4 [ 50.307727] md: raid0 personality registered for level 0 [ 50.311444] md: raid1 personality registered for level 1 [ 50.314545] xor: automatically using best checksumming function: pIII_sse [ 50.332570] pIII_sse : 8770.000 MB/sec [ 50.332601] xor: using function: pIII_sse (8770.000 MB/sec) [ 50.333142] async_tx: api initialized (async) [ 50.400425] raid6: int32x1 936 MB/s [ 50.468312] raid6: int32x2 958 MB/s [ 50.536190] raid6: int32x4 748 MB/s [ 50.604031] raid6: int32x8 676 MB/s [ 50.671814] raid6: mmxx1 3040 MB/s [ 50.739659] raid6: mmxx2 3549 MB/s [ 50.807528] raid6: sse1x1 1982 MB/s [ 50.875369] raid6: sse1x2 2762 MB/s [ 50.943214] raid6: sse2x1 3720 MB/s [ 51.011047] raid6: sse2x2 4440 MB/s [ 51.011078] raid6: using algorithm sse2x2 (4440 MB/s) [ 51.011111] md: raid6 personality registered for level 6 [ 51.011143] md: raid5 personality registered for level 5 [ 51.011176] md: raid4 personality registered for level 4 [ 51.031696] md: raid10 personality registered for level 10 [ 51.235080] SCSI subsystem initialized [ 51.255486] libata version 3.00 loaded. [ 51.257062] sata_sil24 0000:09:00.0: version 1.1 [ 51.257076] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 51.257148] sata_sil24 0000:09:00.0: Applying completion IRQ loss on PCI-X errata fix [ 51.257948] scsi0 : sata_sil24 [ 51.261533] scsi1 : sata_sil24 [ 51.265619] scsi2 : sata_sil24 [ 51.266349] scsi3 : sata_sil24 [ 51.266410] ata1: SATA max UDMA/100 host m128@0xff9ffc00 port 0xff9f0000 irq 16 [ 51.266451] ata2: SATA max UDMA/100 host m128@0xff9ffc00 port 0xff9f2000 irq 16 [ 51.266492] ata3: SATA max UDMA/100 host m128@0xff9ffc00 port 0xff9f4000 irq 16 [ 51.266532] ata4: SATA max UDMA/100 host m128@0xff9ffc00 port 0xff9f6000 irq 16 [ 51.318412] usbcore: registered new interface driver usbfs [ 51.318464] usbcore: registered new interface driver hub [ 51.327011] ahci 0000:00:1f.2: version 3.0 [ 51.327035] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 18 [ 51.328293] usbcore: registered new device driver usb [ 51.347290] USB Universal Host Controller Interface driver v3.0 [ 52.328138] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 52.328187] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 52.328227] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 52.328405] scsi4 : ahci [ 52.328587] scsi5 : ahci [ 52.328707] scsi6 : ahci [ 52.328825] scsi7 : ahci [ 52.328917] ata5: SATA max UDMA/133 abar m1024@0xffafb800 port 0xffafb900 irq 218 [ 52.328956] ata6: SATA max UDMA/133 abar m1024@0xffafb800 port 0xffafb980 irq 218 [ 52.329687] ata7: SATA max UDMA/133 abar m1024@0xffafb800 port 0xffafba00 irq 218 [ 52.329726] ata8: SATA max UDMA/133 abar m1024@0xffafb800 port 0xffafba80 irq 218 [ 52.802046] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 52.831226] ata5.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 52.831263] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 52.889414] ata5.00: configured for UDMA/133 [ 53.360785] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 53.372759] ata1: SATA link down (SStatus 0 SControl 0) [ 53.393443] ata6.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 53.393480] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 53.451632] ata6.00: configured for UDMA/133 [ 53.923539] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 53.952049] ata7.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 53.952086] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 54.010239] ata7.00: configured for UDMA/133 [ 54.482264] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 54.514460] ata8.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 54.514497] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 54.572650] ata8.00: configured for UDMA/133 [ 54.572810] scsi 4:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 54.572954] scsi 5:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 54.573075] scsi 6:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 54.573195] scsi 7:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 55.480022] ata2: SATA link down (SStatus 0 SControl 0) [ 57.587300] ata3: SATA link down (SStatus 0 SControl 0) [ 59.710514] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 59.710676] ata4.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 59.726586] ata4.00: hard resetting link [ 60.109717] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 60.109771] ata4.01: hard resetting link [ 60.492856] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.492910] ata4.02: hard resetting link [ 60.875996] ata4.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.876051] ata4.03: hard resetting link [ 61.259142] ata4.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 61.259195] ata4.04: hard resetting link [ 61.642274] ata4.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 61.642312] ata4.05: hard resetting link [ 61.981555] ata4.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 62.023545] ata4.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 62.023582] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 62.081733] ata4.00: configured for UDMA/100 [ 62.116866] ata4.01: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 62.116903] ata4.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 62.175059] ata4.01: configured for UDMA/100 [ 62.214626] ata4.02: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 62.214662] ata4.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 62.272818] ata4.02: configured for UDMA/100 [ 62.311932] ata4.03: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 62.311968] ata4.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 62.370117] ata4.03: configured for UDMA/100 [ 62.411925] ata4.04: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 62.411962] ata4.04: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 62.470117] ata4.04: configured for UDMA/100 [ 62.470187] ata4: EH complete [ 62.470338] scsi 3:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 62.470470] scsi 3:1:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 62.470595] scsi 3:2:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 62.470713] scsi 3:3:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 62.470829] scsi 3:4:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 62.471009] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 62.471083] ahci 0000:02:00.0: controller can't do NCQ, turning off CAP_NCQ [ 62.471116] ahci 0000:02:00.0: MV_AHCI HACK: port_map 0 -> 0 [ 62.471149] ahci 0000:02:00.0: nr_ports (5) and implemented port map (0xf) don't match, using nr_ports [ 62.471188] ahci 0000:02:00.0: forcing PORTS_IMPL to 0x1f [ 62.477612] Driver 'sd' needs updating - please use bus_type methods [ 62.477708] sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 62.477753] sd 4:0:0:0: [sda] Write Protect is off [ 62.477787] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 62.477800] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.477877] sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 62.477918] sd 4:0:0:0: [sda] Write Protect is off [ 62.477953] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 62.477965] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.478006] sda: sda1 [ 62.495417] sd 4:0:0:0: [sda] Attached SCSI disk [ 62.495501] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 62.495542] sd 5:0:0:0: [sdb] Write Protect is off [ 62.495575] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 62.495587] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.495659] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 62.495700] sd 5:0:0:0: [sdb] Write Protect is off [ 62.495732] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 62.495744] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.495784] sdb: sdb1 [ 62.517414] sd 5:0:0:0: [sdb] Attached SCSI disk [ 62.517493] sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 62.517533] sd 6:0:0:0: [sdc] Write Protect is off [ 62.517565] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 62.517577] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.517642] sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 62.517683] sd 6:0:0:0: [sdc] Write Protect is off [ 62.517715] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 62.517727] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.517766] sdc: sdc1 [ 62.535756] sd 6:0:0:0: [sdc] Attached SCSI disk [ 62.535835] sd 7:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) [ 62.535875] sd 7:0:0:0: [sdd] Write Protect is off [ 62.535907] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 62.535919] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.535988] sd 7:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) [ 62.536029] sd 7:0:0:0: [sdd] Write Protect is off [ 62.536062] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 62.536075] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.536114] sdd: sdd1 [ 62.558003] sd 7:0:0:0: [sdd] Attached SCSI disk [ 62.558085] sd 3:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 62.558125] sd 3:0:0:0: [sde] Write Protect is off [ 62.558158] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 62.558170] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.558235] sd 3:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 62.558276] sd 3:0:0:0: [sde] Write Protect is off [ 62.558308] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 62.558322] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.558361] sde: sde1 [ 62.578538] sd 3:0:0:0: [sde] Attached SCSI disk [ 62.578619] sd 3:1:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB) [ 62.578659] sd 3:1:0:0: [sdf] Write Protect is off [ 62.578692] sd 3:1:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 62.578704] sd 3:1:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.578767] sd 3:1:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB) [ 62.578809] sd 3:1:0:0: [sdf] Write Protect is off [ 62.578841] sd 3:1:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 62.578855] sd 3:1:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.578894] sdf: sdf1 [ 62.597068] sd 3:1:0:0: [sdf] Attached SCSI disk [ 62.597148] sd 3:2:0:0: [sdg] 976773168 512-byte hardware sectors (500108 MB) [ 62.597187] sd 3:2:0:0: [sdg] Write Protect is off [ 62.597220] sd 3:2:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 62.597232] sd 3:2:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.597295] sd 3:2:0:0: [sdg] 976773168 512-byte hardware sectors (500108 MB) [ 62.597335] sd 3:2:0:0: [sdg] Write Protect is off [ 62.597367] sd 3:2:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 62.597381] sd 3:2:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.597420] sdg: sdg1 [ 62.611709] sd 3:2:0:0: [sdg] Attached SCSI disk [ 62.611789] sd 3:3:0:0: [sdh] 976773168 512-byte hardware sectors (500108 MB) [ 62.611828] sd 3:3:0:0: [sdh] Write Protect is off [ 62.611861] sd 3:3:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 62.611873] sd 3:3:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.611936] sd 3:3:0:0: [sdh] 976773168 512-byte hardware sectors (500108 MB) [ 62.611975] sd 3:3:0:0: [sdh] Write Protect is off [ 62.612010] sd 3:3:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 62.612024] sd 3:3:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.612064] sdh: sdh1 [ 62.625874] sd 3:3:0:0: [sdh] Attached SCSI disk [ 62.625954] sd 3:4:0:0: [sdi] 976773168 512-byte hardware sectors (500108 MB) [ 62.625994] sd 3:4:0:0: [sdi] Write Protect is off [ 62.626026] sd 3:4:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 62.626039] sd 3:4:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.626102] sd 3:4:0:0: [sdi] 976773168 512-byte hardware sectors (500108 MB) [ 62.626142] sd 3:4:0:0: [sdi] Write Protect is off [ 62.626174] sd 3:4:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 62.626186] sd 3:4:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.626225] sdi: sdi1 [ 62.642794] sd 3:4:0:0: [sdi] Attached SCSI disk [ 62.647116] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 62.647164] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 62.647208] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 62.647252] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 62.647296] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 62.647342] sd 3:1:0:0: Attached scsi generic sg5 type 0 [ 62.647388] sd 3:2:0:0: Attached scsi generic sg6 type 0 [ 62.647433] sd 3:3:0:0: Attached scsi generic sg7 type 0 [ 62.647478] sd 3:4:0:0: Attached scsi generic sg8 type 0 [ 62.783924] md: md0 stopped. [ 63.235387] md: md1 stopped. [ 63.471095] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 5 ports 3 Gbps 0x1f impl RAID mode [ 63.471143] ahci 0000:02:00.0: flags: 64bit stag pmp slum part [ 63.471182] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 63.471393] scsi8 : ahci [ 63.471605] scsi9 : ahci [ 63.471752] scsi10 : ahci [ 63.471900] scsi11 : ahci [ 63.472052] scsi12 : ahci [ 63.472104] ata9: SATA max UDMA/133 abar m1024@0xff5ffc00 port 0xff5ffd00 irq 17 [ 63.472144] ata10: SATA max UDMA/133 abar m1024@0xff5ffc00 port 0xff5ffd80 irq 17 [ 63.472183] ata11: SATA max UDMA/133 abar m1024@0xff5ffc00 port 0xff5ffe00 irq 17 [ 63.472222] ata12: SATA max UDMA/133 abar m1024@0xff5ffc00 port 0xff5ffe80 irq 17 [ 63.472261] ata13: SATA max UDMA/133 abar m1024@0xff5ffc00 port 0xff5fff00 irq 17 [ 64.108646] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 64.158924] ata9.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 [ 64.158962] ata9.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 64.178789] md: invalid raid superblock magic on sda [ 64.178827] md: sda does not have a valid v0.90 superblock, not importing! [ 64.178866] md: md_import_device returned -22 [ 64.179053] md: invalid raid superblock magic on sda [ 64.179089] md: sda does not have a valid v0.90 superblock, not importing! [ 64.179133] md: md_import_device returned -22 [ 64.179316] md: invalid raid superblock magic on sda [ 64.179352] md: sda does not have a valid v0.90 superblock, not importing! [ 64.179390] md: md_import_device returned -22 [ 64.179582] md: invalid raid superblock magic on sda [ 64.179619] md: sda does not have a valid v0.90 superblock, not importing! [ 64.179657] md: md_import_device returned -22 [ 64.179786] md: md2 stopped. [ 64.217117] ata9.00: configured for UDMA/133 [ 64.437190] md: bind [ 64.437364] md: bind [ 64.437554] md: bind [ 64.437761] md: bind [ 64.437955] md: bind [ 64.446062] raid5: device sde1 operational as raid disk 0 [ 64.446096] raid5: device sdi1 operational as raid disk 4 [ 64.446129] raid5: device sdh1 operational as raid disk 3 [ 64.446161] raid5: device sdg1 operational as raid disk 2 [ 64.446194] raid5: device sdf1 operational as raid disk 1 [ 64.446557] raid5: allocated 5252kB for md2 [ 64.446589] raid5: raid level 5 set md2 active with 5 out of 5 devices, algorithm 2 [ 64.446627] RAID5 conf printout: [ 64.446658] --- rd:5 wd:5 [ 64.446689] disk 0, o:1, dev:sde1 [ 64.446720] disk 1, o:1, dev:sdf1 [ 64.446750] disk 2, o:1, dev:sdg1 [ 64.446781] disk 3, o:1, dev:sdh1 [ 64.446812] disk 4, o:1, dev:sdi1 [ 64.855938] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 64.863194] md: md0 stopped. [ 64.898948] ata10.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 [ 64.898985] ata10.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 64.957138] ata10.00: configured for UDMA/133 [ 65.230047] md: md1 stopped. [ 65.593294] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 65.596240] ata11.00: ATA-7: SAMSUNG HD300LJ, ZT100-12, max UDMA7 [ 65.596279] ata11.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 65.599262] ata11.00: configured for UDMA/133 [ 65.630678] md: invalid raid superblock magic on sda [ 65.630715] md: sda does not have a valid v0.90 superblock, not importing! [ 65.630754] md: md_import_device returned -22 [ 65.630933] md: invalid raid superblock magic on sda [ 65.630969] md: sda does not have a valid v0.90 superblock, not importing! [ 65.631007] md: md_import_device returned -22 [ 65.631161] md: invalid raid superblock magic on sda [ 65.631197] md: sda does not have a valid v0.90 superblock, not importing! [ 65.631235] md: md_import_device returned -22 [ 65.631385] md: invalid raid superblock magic on sda [ 65.631422] md: sda does not have a valid v0.90 superblock, not importing! [ 65.631460] md: md_import_device returned -22 [ 65.916584] ata12: SATA link down (SStatus 0 SControl 300) [ 66.235850] ata13: SATA link down (SStatus 0 SControl 0) [ 66.236010] scsi 8:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 [ 66.236125] sd 8:0:0:0: [sdj] 156301488 512-byte hardware sectors (80026 MB) [ 66.236168] sd 8:0:0:0: [sdj] Write Protect is off [ 66.236202] sd 8:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 66.236215] sd 8:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.236290] sd 8:0:0:0: [sdj] 156301488 512-byte hardware sectors (80026 MB) [ 66.236330] sd 8:0:0:0: [sdj] Write Protect is off [ 66.236362] sd 8:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 66.236383] sd 8:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.236422] sdj: sdj1 [ 66.259836] sd 8:0:0:0: [sdj] Attached SCSI disk [ 66.259905] sd 8:0:0:0: Attached scsi generic sg9 type 0 [ 66.259997] scsi 9:0:0:0: Direct-Access ATA ST380811AS 3.AA PQ: 0 ANSI: 5 [ 66.260084] sd 9:0:0:0: [sdk] 156301488 512-byte hardware sectors (80026 MB) [ 66.260125] sd 9:0:0:0: [sdk] Write Protect is off [ 66.260157] sd 9:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 66.260170] sd 9:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.260237] sd 9:0:0:0: [sdk] 156301488 512-byte hardware sectors (80026 MB) [ 66.260278] sd 9:0:0:0: [sdk] Write Protect is off [ 66.260310] sd 9:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 66.260323] sd 9:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.260363] sdk: sdk1 [ 66.285054] sd 9:0:0:0: [sdk] Attached SCSI disk [ 66.285126] sd 9:0:0:0: Attached scsi generic sg10 type 0 [ 66.285221] scsi 10:0:0:0: Direct-Access ATA SAMSUNG HD300LJ ZT10 PQ: 0 ANSI: 5 [ 66.285307] sd 10:0:0:0: [sdl] 586072368 512-byte hardware sectors (300069 MB) [ 66.285352] sd 10:0:0:0: [sdl] Write Protect is off [ 66.285384] sd 10:0:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 66.285397] sd 10:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.285824] sd 10:0:0:0: [sdl] 586072368 512-byte hardware sectors (300069 MB) [ 66.285874] sd 10:0:0:0: [sdl] Write Protect is off [ 66.285907] sd 10:0:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 66.285926] sd 10:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.285965] sdl: sdl1 [ 66.308013] sd 10:0:0:0: [sdl] Attached SCSI disk [ 66.308084] sd 10:0:0:0: Attached scsi generic sg11 type 0 [ 66.309745] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 66.309815] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 66.309818] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 66.310032] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 66.310092] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480 [ 66.310223] usb usb1: configuration #1 chosen from 1 choice [ 66.310272] hub 1-0:1.0: USB hub found [ 66.310306] hub 1-0:1.0: 2 ports detected [ 66.412516] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 66.412592] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 66.412595] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 66.412645] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 66.412702] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 [ 66.412813] usb usb2: configuration #1 chosen from 1 choice [ 66.412863] hub 2-0:1.0: USB hub found [ 66.412897] hub 2-0:1.0: 2 ports detected [ 66.444110] md: md0 stopped. [ 66.516319] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 66.516411] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 66.516414] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 66.516466] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 66.516525] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e880 [ 66.516639] usb usb3: configuration #1 chosen from 1 choice [ 66.516687] hub 3-0:1.0: USB hub found [ 66.516721] hub 3-0:1.0: 2 ports detected [ 66.620069] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21 [ 66.620147] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 66.620151] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 66.620211] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 66.620269] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ec00 [ 66.620378] usb usb4: configuration #1 chosen from 1 choice [ 66.620425] hub 4-0:1.0: USB hub found [ 66.620459] hub 4-0:1.0: 2 ports detected [ 66.651904] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 66.689876] md: invalid raid superblock magic on sda [ 66.689914] md: sda does not have a valid v0.90 superblock, not importing! [ 66.689952] md: md_import_device returned -22 [ 66.690329] md: invalid raid superblock magic on sda [ 66.690365] md: sda does not have a valid v0.90 superblock, not importing! [ 66.690403] md: md_import_device returned -22 [ 66.690472] md: md1 stopped. [ 66.724382] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 66.724464] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 66.724467] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 66.724519] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 66.728452] ehci_hcd 0000:00:1d.7: debug port 1 [ 66.728489] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 66.728495] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffafbc00 [ 66.778634] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 66.778796] usb usb5: configuration #1 chosen from 1 choice [ 66.778855] hub 5-0:1.0: USB hub found [ 66.778890] hub 5-0:1.0: 8 ports detected [ 66.882515] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 66.883311] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 66.883320] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 66.883393] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 66.883485] skge 1.13 addr 0xff4f4000 irq 23 chip Yukon-Lite rev 9 [ 66.883720] skge eth0: addr 00:18:f3:85:f6:01 [ 66.883945] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 66.933583] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[ff4ff800-ff4fffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 66.933905] ata_piix 0000:00:1f.1: version 2.12 [ 66.933915] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 66.934012] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 66.934820] scsi13 : ata_piix [ 66.935152] scsi14 : ata_piix [ 66.935916] ata14: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 66.935950] ata15: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 67.037821] md: bind [ 67.038001] md: bind [ 67.038151] md: bind [ 67.038322] md: bind [ 67.046320] raid5: device sda1 operational as raid disk 0 [ 67.046354] raid5: device sdd1 operational as raid disk 3 [ 67.046386] raid5: device sdc1 operational as raid disk 2 [ 67.046419] raid5: device sdb1 operational as raid disk 1 [ 67.046748] raid5: allocated 4211kB for md1 [ 67.046780] raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2 [ 67.046818] RAID5 conf printout: [ 67.046848] --- rd:4 wd:4 [ 67.046879] disk 0, o:1, dev:sda1 [ 67.046910] disk 1, o:1, dev:sdb1 [ 67.046941] disk 2, o:1, dev:sdc1 [ 67.046971] disk 3, o:1, dev:sdd1 [ 67.177736] usb 1-2: device not accepting address 2, error -71 [ 67.252898] md: md0 stopped. [ 67.399753] md: bind [ 67.399998] md: bind [ 67.407890] raid1: raid set md0 active with 2 out of 2 mirrors [ 67.546330] kjournald starting. Commit interval 5 seconds [ 67.546336] EXT3-fs: mounted filesystem with ordered data mode. [ 67.657660] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 67.833888] usb 1-2: configuration #1 chosen from 1 choice [ 68.199544] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000eb460f] [ 71.865580] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 72.247610] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 72.261461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 72.309290] intel_rng: FWH not detected [ 72.319769] EDAC MC: Ver: 2.1.0 Feb 22 2008 [ 72.341502] EDAC i82975x: ECC disabled on both channels. [ 72.381272] usbcore: registered new interface driver hiddev [ 72.394903] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input3 [ 72.410693] iTCO_vendor_support: vendor-support=0 [ 72.419901] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 72.419997] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 72.420059] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 72.454890] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 72.485872] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input4 [ 72.577619] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 [ 72.577771] usbcore: registered new interface driver usbhid [ 72.577805] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 72.681456] input: Power Button (FF) as /devices/virtual/input/input5 [ 72.737250] ACPI: Power Button (FF) [PWRF] [ 72.737353] input: Power Button (CM) as /devices/virtual/input/input6 [ 72.768901] Linux agpgart interface v0.102 [ 72.801113] ACPI: Power Button (CM) [PWRB] [ 72.833086] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 72.833164] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 72.833188] sky2 0000:03:00.0: v1.20 addr 0xff6fc000 irq 16 Yukon-EC (0xb6) rev 2 [ 72.833535] sky2 eth1: addr 00:18:f3:85:f6:00 [ 73.192256] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 21 [ 73.192337] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 73.193349] udev: renamed network interface eth0 to eth2 [ 73.196547] skge eth2: enabling interface [ 73.806700] udev: renamed network interface eth1 to eth0 [ 74.034262] loop: module loaded [ 74.076048] lp: driver loaded but no devices found [ 74.897931] skge eth2: Link is up at 100 Mbps, full duplex, flow control both [ 74.907368] EXT3 FS on md0, internal journal [ 75.000928] NET: Registered protocol family 17 [ 75.902835] ip_tables: (C) 2000-2006 Netfilter Core Team [ 76.165753] NET: Registered protocol family 10 [ 76.165931] lo: Disabled Privacy Extensions [ 86.398115] eth2: no IPv6 routers present