[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffefc00 (reserved) [ 0.000000] BIOS-e820: 000000003ffefc00 - 000000003fffb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fffb000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262096 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262096 [ 0.000000] On node 0 totalpages: 262096 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32465 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6EF0 checksum 0 [ 0.000000] ACPI: RSDP 000F6EF0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 3FFEFC84, 0038 (r1 HP 0934 11070720 HP 1) [ 0.000000] ACPI: FACP 3FFEFC00, 0084 (r2 HP 0934 2 HP 1) [ 0.000000] ACPI: DSDT 3FFEFD54, 84E7 (r1 HP nc8200 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFFAE80, 0040 [ 0.000000] ACPI: APIC 3FFEFCBC, 005A (r1 HP 0934 1 HP 1) [ 0.000000] ACPI: MCFG 3FFEFD18, 003C (r1 HP 0934 1 HP 1) [ 0.000000] ACPI: SSDT 3FFF823B, 0371 (r1 HP HPQPpc 1001 MSFT 100000E) [ 0.000000] ACPI: SSDT 3FFF85AC, 0059 (r1 HP HPQNLP 1 MSFT 100000E) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfec01000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260049 [ 0.000000] Kernel command line: root=UUID=eda74362-bd84-44d5-b5ce-4ab0de86ae2d ro [ 0.000000] mapped APIC to ffffb000 (fec01000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 798.051 MHz processor. [ 15.149767] Console: colour VGA+ 80x25 [ 15.149774] console [tty0] enabled [ 15.153109] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 15.153782] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 15.210349] Memory: 1026768k/1048384k available (2157k kernel code, 20948k reserved, 998k data, 364k init, 130880k highmem) [ 15.210435] virtual kernel memory layout: [ 15.210438] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 15.210441] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.210443] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 15.210446] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 15.210449] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 15.210452] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 15.210454] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 15.210883] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.211043] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 15.291126] Calibrating delay using timer specific routine.. 1598.18 BogoMIPS (lpj=3196362) [ 15.291282] Security Framework initialized [ 15.291342] SELinux: Disabled at boot. [ 15.291418] AppArmor: AppArmor initialized [ 15.291477] Failure registering capabilities with primary security module. [ 15.291546] Mount-cache hash table entries: 512 [ 15.291808] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 [ 15.291830] CPU: L1 I cache: 32K, L1 D cache: 32K [ 15.291928] CPU: L2 cache: 2048K [ 15.291983] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000 [ 15.292000] Compat vDSO mapped to ffffe000. [ 15.292070] Checking 'hlt' instruction... OK. [ 15.307812] SMP alternatives: switching to UP code [ 15.311364] Freeing SMP alternatives: 11k freed [ 15.311620] Early unpacking initramfs... done [ 16.163367] ACPI: Core revision 20070126 [ 16.163570] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.234786] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 [ 16.234965] Total of 1 processors activated (1598.18 BogoMIPS). [ 16.235226] ENABLING IO-APIC IRQs [ 16.235489] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.383093] Brought up 1 CPUs [ 16.383182] CPU0 attaching sched-domain: [ 16.383187] domain 0: span 01 [ 16.383191] groups: 01 [ 16.383479] net_namespace: 64 bytes [ 16.383546] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 16.383613] Booting paravirtualized kernel on bare hardware [ 16.384616] Time: 9:21:24 Date: 05/08/08 [ 16.384711] NET: Registered protocol family 16 [ 16.385130] EISA bus registered [ 16.385211] ACPI: bus type pci registered [ 16.386860] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 [ 16.386919] PCI: Using configuration type 1 [ 16.386974] Setting up standard PCI resources [ 16.390269] ACPI: EC: Look up EC in DSDT [ 16.393048] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 16.416152] ACPI: Interpreter enabled [ 16.416210] ACPI: (supports S0 S3 S4 S5) [ 16.416443] ACPI: Using IOAPIC for interrupt routing [ 16.439128] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 16.439194] ACPI: EC: driver started in interrupt mode [ 16.439341] ACPI: PCI Root Bridge [C003] (0000:00) [ 16.440230] Force enabled HPET at base address 0xfed00000 [ 16.440241] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 16.440303] PCI quirk: region 1100-113f claimed by ICH6 GPIO [ 16.441629] PCI: Transparent bridge - 0000:00:1e.0 [ 16.441810] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 16.442413] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C054._PRT] [ 16.442625] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C069._PRT] [ 16.443048] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0CE._PRT] [ 16.443344] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0DE._PRT] [ 16.502435] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11) [ 16.503083] ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11) [ 16.503721] ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11) [ 16.504357] ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11) [ 16.504992] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11) [ 16.505633] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11) [ 16.506266] ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11) [ 16.506678] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] [ 16.507215] ACPI: Power Resource [C1D0] (on) [ 16.507646] ACPI: Power Resource [C1B2] (on) [ 16.507790] ACPI: Power Resource [C1C9] (on) [ 16.508058] ACPI: Power Resource [C251] (off) [ 16.508310] ACPI: Power Resource [C252] (off) [ 16.508561] ACPI: Power Resource [C253] (off) [ 16.508812] ACPI: Power Resource [C254] (off) [ 16.508949] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.509065] pnp: PnP ACPI init [ 16.509129] ACPI: bus type pnp registered [ 16.529281] pnp: PnP ACPI: found 12 devices [ 16.529343] ACPI: ACPI bus type pnp unregistered [ 16.529402] PnPBIOS: Disabled by ACPI PNP [ 16.529883] PCI: Using ACPI for IRQ routing [ 16.529940] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.655010] NET: Registered protocol family 8 [ 16.655067] NET: Registered protocol family 20 [ 16.655446] hpet clockevent registered [ 16.655456] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 16.655676] hpet0: 3 64-bit timers, 14318180 Hz [ 16.656791] AppArmor: AppArmor Filesystem Enabled [ 16.658997] Time: tsc clocksource has been installed. [ 16.667068] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 16.667130] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 16.667191] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 16.667271] system 00:09: ioport range 0x500-0x57f has been reserved [ 16.667333] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved [ 16.667401] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 16.667473] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 16.667533] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 16.667593] system 00:0a: ioport range 0x1100-0x113f has been reserved [ 16.667653] system 00:0a: ioport range 0x1200-0x121f has been reserved [ 16.667714] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 16.667782] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved [ 16.667849] system 00:0a: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 16.667917] system 00:0a: iomem range 0xfed90000-0xfed9afff could not be reserved [ 16.667990] system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved [ 16.668057] system 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved [ 16.698924] PCI: Bridge: 0000:00:01.0 [ 16.698980] IO window: 2000-2fff [ 16.699039] MEM window: c8800000-c8bfffff [ 16.699095] PREFETCH window: c0000000-c7ffffff [ 16.699152] PCI: Bridge: 0000:00:1c.0 [ 16.699205] IO window: disabled. [ 16.699263] MEM window: c8000000-c83fffff [ 16.699320] PREFETCH window: disabled. [ 16.699378] PCI: Bridge: 0000:00:1c.1 [ 16.699431] IO window: disabled. [ 16.699488] MEM window: disabled. [ 16.699543] PREFETCH window: disabled. [ 16.699610] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 16.700354] IO window: 00001400-000014ff [ 16.700412] IO window: 00001800-000018ff [ 16.700470] PREFETCH window: 50000000-53ffffff [ 16.700529] MEM window: 54000000-57ffffff [ 16.700588] PCI: Bridge: 0000:00:1e.0 [ 16.700641] IO window: disabled. [ 16.700699] MEM window: c8400000-c87fffff [ 16.700756] PREFETCH window: disabled. [ 16.700830] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.700941] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 16.700968] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.701078] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.701107] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 16.701217] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.701234] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 16.701258] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 16.701383] NET: Registered protocol family 2 [ 16.739100] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 16.739578] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.741132] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 16.741933] TCP: Hash tables configured (established 131072 bind 65536) [ 16.741992] TCP reno registered [ 16.751222] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 17.519576] it is [ 18.342403] Freeing initrd memory: 7846k freed [ 18.343437] audit: initializing netlink socket (disabled) [ 18.343514] audit(1210238485.972:1): initialized [ 18.343831] highmem bounce pool size: 64 pages [ 18.347706] VFS: Disk quotas dquot_6.5.1 [ 18.347902] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.348204] io scheduler noop registered [ 18.348260] io scheduler anticipatory registered [ 18.348316] io scheduler deadline registered [ 18.348390] io scheduler cfq registered (default) [ 18.348540] Boot video device is 0000:01:00.0 [ 18.348736] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 18.348779] assign_interrupt_mode Found MSI capability [ 18.348871] Allocate Port Service[0000:00:01.0:pcie00] [ 18.349012] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.349074] assign_interrupt_mode Found MSI capability [ 18.349178] Allocate Port Service[0000:00:1c.0:pcie00] [ 18.349246] Allocate Port Service[0000:00:1c.0:pcie02] [ 18.349385] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.349448] assign_interrupt_mode Found MSI capability [ 18.349551] Allocate Port Service[0000:00:1c.1:pcie00] [ 18.349616] Allocate Port Service[0000:00:1c.1:pcie02] [ 18.350055] isapnp: Scanning for PnP cards... [ 18.704655] isapnp: No Plug & Play device found [ 18.758175] Real Time Clock Driver v1.12ac [ 18.758430] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.758914] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 18.759778] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 19 [ 18.759894] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 18.761150] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.761340] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 18.761589] PNP: PS/2 Controller [PNP0303:C1C6,PNP0f13:C1C7] at 0x60,0x64 irq 1,12 [ 18.763547] i8042.c: Detected active multiplexing controller, rev 1.1. [ 18.764359] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.764419] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 18.764476] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 18.764533] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 18.764590] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 18.766861] mice: PS/2 mouse device common for all mice [ 18.767122] EISA: Probing bus 0 at eisa.0 [ 18.767184] Cannot allocate resource for EISA slot 1 [ 18.767241] Cannot allocate resource for EISA slot 2 [ 18.767297] Cannot allocate resource for EISA slot 3 [ 18.767380] EISA: Detected 0 cards. [ 18.767434] cpuidle: using governor ladder [ 18.767489] cpuidle: using governor menu [ 18.767693] NET: Registered protocol family 1 [ 18.767788] Using IPI No-Shortcut mode [ 18.767884] registered taskstats version 1 [ 18.768136] Magic number: 8:369:373 [ 18.768307] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 18.768365] EDD information not available. [ 18.768700] Freeing unused kernel memory: 364k freed [ 18.794653] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.132765] fuse init (API version 7.9) [ 19.169534] ACPI: Transitioning device [C255] to D3 [ 19.169594] ACPI: Transitioning device [C255] to D3 [ 19.169656] ACPI: Fan [C255] (off) [ 19.170091] ACPI: Transitioning device [C256] to D3 [ 19.170147] ACPI: Transitioning device [C256] to D3 [ 19.170206] ACPI: Fan [C256] (off) [ 19.170647] ACPI: Transitioning device [C257] to D3 [ 19.170704] ACPI: Transitioning device [C257] to D3 [ 19.170763] ACPI: Fan [C257] (off) [ 19.171194] ACPI: Transitioning device [C258] to D3 [ 19.171250] ACPI: Transitioning device [C258] to D3 [ 19.171309] ACPI: Fan [C258] (off) [ 19.188220] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 19.188485] ACPI: Processor [C001] (supports 8 throttling states) [ 19.258025] ACPI: Thermal Zone [TZ1] (30 C) [ 19.293098] ACPI: Thermal Zone [TZ2] (25 C) [ 19.295154] ACPI: Thermal Zone [TZ3] (22 C) [ 19.295871] ACPI: Thermal Zone [TZ4] (29 C) [ 19.335064] device-mapper: uevent: version 1.0.3 [ 19.335199] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 21.030351] tg3.c:v3.86 (November 9, 2007) [ 21.030446] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.030564] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 21.174346] usbcore: registered new interface driver usbfs [ 21.174445] usbcore: registered new interface driver hub [ 21.194004] usbcore: registered new device driver usb [ 21.196891] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:14:38:10:c0:3f [ 21.197211] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 21.197278] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 21.222310] USB Universal Host Controller Interface driver v3.0 [ 21.225499] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 21.225618] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 21.225626] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.226107] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 21.226209] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003000 [ 21.226507] usb usb1: configuration #1 chosen from 1 choice [ 21.226607] hub 1-0:1.0: USB hub found [ 21.226668] hub 1-0:1.0: 2 ports detected [ 21.339967] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.340093] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.340101] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.340195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 21.340298] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003020 [ 21.340554] usb usb2: configuration #1 chosen from 1 choice [ 21.340655] hub 2-0:1.0: USB hub found [ 21.340716] hub 2-0:1.0: 2 ports detected [ 21.442360] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.442484] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.442492] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.442587] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 21.442688] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 21.442954] usb usb3: configuration #1 chosen from 1 choice [ 21.443053] hub 3-0:1.0: USB hub found [ 21.443114] hub 3-0:1.0: 2 ports detected [ 21.474780] SCSI subsystem initialized [ 21.546402] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 21.546530] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.546537] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.546633] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 21.550632] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.550693] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.550705] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8c00000 [ 21.566202] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.566465] usb usb4: configuration #1 chosen from 1 choice [ 21.566567] hub 4-0:1.0: USB hub found [ 21.566630] hub 4-0:1.0: 8 ports detected [ 21.693621] libata version 3.00 loaded. [ 21.710258] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 19 [ 21.760252] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8402000-c84027ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.896150] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.896315] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.896337] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 21.926249] ata_piix 0000:00:1f.1: version 2.12 [ 21.926275] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.926433] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.938472] scsi0 : ata_piix [ 21.954174] scsi1 : ata_piix [ 21.955489] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3580 irq 14 [ 21.955551] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3588 irq 15 [ 22.210110] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 22.338532] ata1.00: ATA-6: ST9808211A, 3.02, max UDMA/100 [ 22.338596] ata1.00: 156301488 sectors, multi 16: LBA48 [ 22.338699] ata1.01: ATAPI: MATSHITAUJ-822Da, 1.02, max MWDMA2 [ 22.354563] ata1.00: configured for UDMA/100 [ 22.385418] usb 2-1: configuration #1 chosen from 1 choice [ 22.526569] ata1.01: configured for MWDMA2 [ 22.527373] ata2: port disabled. ignoring. [ 22.527575] scsi 0:0:0:0: Direct-Access ATA ST9808211A 3.02 PQ: 0 ANSI: 5 [ 22.529540] scsi 0:0:1:0: CD-ROM MATSHITA UJ-822Da 1.02 PQ: 0 ANSI: 5 [ 22.789965] Driver 'sd' needs updating - please use bus_type methods [ 22.792215] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 22.792297] sd 0:0:0:0: [sda] Write Protect is off [ 22.792355] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.792389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.792533] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 22.792609] sd 0:0:0:0: [sda] Write Protect is off [ 22.792666] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.792699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.792770] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 22.807043] usbcore: registered new interface driver hiddev [ 22.818739] sda1 sda2 sda3 [ 22.819059] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.819945] input: Genius NetScroll + Traveler as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2 [ 22.831850] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.831966] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 22.834100] input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:1d.1-1 [ 22.834356] usbcore: registered new interface driver usbhid [ 22.834415] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 22.834846] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 22.834907] Uniform CD-ROM driver Revision: 3.20 [ 22.835039] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 23.146134] ieee1394: Host added: ID:BUS[0-00:1023] GUID[a537564400508b71] [ 23.303995] kjournald starting. Commit interval 5 seconds [ 23.304069] EXT3-fs: mounted filesystem with ordered data mode. [ 23.653885] Clocksource tsc unstable (delta = -2730382647 ns) [ 23.666535] Time: hpet clocksource has been installed. [ 37.310926] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.354982] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.566856] Linux agpgart interface v0.102 [ 37.903482] iTCO_vendor_support: vendor-support=0 [ 37.970759] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 37.971019] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 37.971151] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 38.578613] intel_rng: FWH not detected [ 39.346674] input: Power Button (FF) as /devices/virtual/input/input3 [ 39.358435] ACPI: Power Button (FF) [PWRF] [ 39.358670] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 39.370420] ACPI: Sleep Button (CM) [C1F2] [ 39.370599] input: Lid Switch as /devices/virtual/input/input5 [ 39.370825] ACPI: Lid Switch [C1F3] [ 39.437984] ACPI: AC Adapter [C176] (off-line) [ 39.554584] ACPI: WMI-Acer: Mapper loaded [ 39.758246] ACPI: Battery Slot [C178] (battery present) [ 39.758745] ACPI: Battery Slot [C177] (battery absent) [ 41.322039] ieee80211_crypt: registered algorithm 'NULL' [ 41.382015] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 41.382082] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 41.482093] Yenta: CardBus bridge found at 0000:02:06.0 [103c:0934] [ 41.482182] Yenta: Enabling burst memory read transactions [ 41.482243] Yenta: Using INTVAL to route CSC interrupts to PCI [ 41.482301] Yenta: Routing CardBus interrupts to PCI [ 41.482361] Yenta TI: socket 0000:02:06.0, mfunc 0x01111b22, devctl 0x64 [ 41.637954] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 41.638027] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 41.714759] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 41.714823] Socket status: 30000006 [ 41.714878] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 41.714947] pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff [ 41.882259] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 41.934950] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 42.001853] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 42.061875] sdhci: Secure Digital Host Controller Interface driver [ 42.061939] sdhci: Copyright(c) Pierre Ossman [ 42.265822] irda_init() [ 42.265849] NET: Registered protocol family 23 [ 42.365975] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227 [ 42.366062] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e [ 42.366131] smsc_ircc_present: can't get sir_base of 0x3e8 [ 45.809974] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7 [ 45.825025] ACPI: Video Device [C0FA] (multi-head: yes rom: no post: no) [ 48.657193] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 [ 48.657270] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 48.696941] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 50.910735] ipw2200: Radio Frequency Kill Switch is On: [ 50.910740] Kill switch must be turned off for wireless networking to work. [ 51.038654] cs: IO port probe 0x100-0x4ff: clean. [ 51.041282] cs: IO port probe 0xc00-0xcf7: clean. [ 51.042286] cs: IO port probe 0xa00-0xaff: clean. [ 51.227819] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 51.227948] ACPI: PCI Interrupt 0000:02:06.3[B] -> GSI 19 (level, low) -> IRQ 22 [ 51.228284] sdhci: SDHCI controller found at 0000:02:06.4 [104c:8034] (rev 0) [ 51.228364] ACPI: PCI Interrupt 0000:02:06.4[C] -> GSI 22 (level, low) -> IRQ 19 [ 51.228485] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 51.228621] mmc0: SDHCI at 0xc840a000 irq 19 DMA [ 51.228689] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it. [ 51.228800] mmc1: SDHCI at 0xc840b000 irq 19 DMA [ 51.228866] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it. [ 51.228977] mmc2: SDHCI at 0xc840c000 irq 19 DMA [ 51.236009] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 21 [ 51.236135] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 51.642159] intel8x0_measure_ac97_clock: measured 55282 usecs [ 51.642223] intel8x0: clocking to 48000 [ 51.943600] EXT3 FS on sda3, internal journal [ 54.007195] ip_tables: (C) 2000-2006 Netfilter Core Team [ 55.217643] No dock devices found. [ 22.370412] Marking TSC unstable due to: cpufreq changes. [ 25.853839] NET: Registered protocol family 10 [ 25.854021] lo: Disabled Privacy Extensions [ 25.993658] [drm] Initialized drm 1.1.0 20060810 [ 26.002160] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.002167] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 26.002231] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 26.259049] lp: driver loaded but no devices found [ 26.291578] ppdev: user-space parallel port driver [ 26.658179] audit(1210231331.586:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5326 profile="/usr/sbin/cupsd" namespace="default" [ 30.661258] [drm] Setting GART location based on new memory map [ 30.663036] [drm] Loading R300 Microcode [ 30.663081] [drm] writeback test succeeded in 1 usecs [ 34.864322] apm: BIOS not found. [ 38.146253] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 38.329288] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.555463] Bluetooth: Core ver 2.11 [ 38.555997] NET: Registered protocol family 31 [ 38.556000] Bluetooth: HCI device and connection manager initialized [ 38.556003] Bluetooth: HCI socket layer initialized [ 38.616121] Bluetooth: L2CAP ver 2.9 [ 38.616125] Bluetooth: L2CAP socket layer initialized [ 38.643495] Bluetooth: RFCOMM socket layer initialized [ 38.643850] Bluetooth: RFCOMM TTY layer initialized [ 38.643853] Bluetooth: RFCOMM ver 1.8 [ 40.067774] tg3: eth0: Link is up at 10 Mbps, half duplex. [ 40.067779] tg3: eth0: Flow control is off for TX and off for RX. [ 40.069102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 103.622683] NET: Registered protocol family 17 [ 105.795091] eth0: no IPv6 routers present [ 150.883563] eth0: no IPv6 routers present