[ 0.000000] Linux version 2.6.24-12-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 22:31:43 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] Command line: root=UUID=da2383c2-389a-457e-bd25-2c35cf1be8c2 ro quiet splash i8042.noacpi=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000047fef000 (usable) [ 0.000000] BIOS-e820: 0000000047ff0000 - 0000000047ffffc0 (ACPI data) [ 0.000000] BIOS-e820: 0000000047ffffc0 - 0000000048000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 294895) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000E5010 checksum 0 [ 0.000000] ACPI: RSDP 000E5010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 47FFC340, 0030 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: FACP 47FFFAC0, 0074 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: DSDT 47FFC380, 3736 (r1 INSYDE ATIRS480 1000 INTL 20040116) [ 0.000000] ACPI: FACS 47FFFFC0, 0040 [ 0.000000] ACPI: APIC 47FFFB50, 0068 (r1 INSYDE APIC_000 30303030 0000 10200) [ 0.000000] ACPI: HPET 47FFFBC0, 0038 (r1 INSYDE HPET_000 30303030 0000 30303030) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 1 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000047fef000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 294895) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000047fef000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 294895 [ 0.000000] On node 0 totalpages: 294798 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1208 pages reserved [ 0.000000] DMA zone: 2735 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3975 pages used for memmap [ 0.000000] DMA32 zone: 286824 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed0000000000000 is bogus [ 0.000000] try hpet=force on the kernel command line to fix it up to 0xfed00000. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 48000000:b7f80000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 289559 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=da2383c2-389a-457e-bd25-2c35cf1be8c2 ro quiet splash i8042.noacpi=1 [ 0.000000] Unknown boot option `i8042.noacpi=1': ignoring [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 47.239250] time.c: Detected 2000.027 MHz processor. [ 47.240039] Console: colour VGA+ 80x25 [ 47.240042] console [tty0] enabled [ 47.240091] Checking aperture... [ 47.240094] CPU 0: aperture @ 0 size 32 MB [ 47.251607] No AGP bridge found [ 47.272296] Memory: 1150580k/1179580k available (2466k kernel code, 28612k reserved, 1310k data, 316k init) [ 47.272351] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 47.349030] Calibrating delay using timer specific routine.. 4004.26 BogoMIPS (lpj=8008532) [ 47.349084] Security Framework initialized [ 47.349096] SELinux: Disabled at boot. [ 47.349116] AppArmor: AppArmor initialized [ 47.349121] Failure registering capabilities with primary security module. [ 47.349292] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 47.352080] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 47.353461] Mount-cache hash table entries: 256 [ 47.353665] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 47.353668] CPU: L2 Cache: 1024K (64 bytes/line) [ 47.353670] CPU 0/0 -> Node 0 [ 47.353700] SMP alternatives: switching to UP code [ 47.354523] Early unpacking initramfs... done [ 47.677906] ACPI: Core revision 20070126 [ 47.677961] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 47.723977] Using local APIC timer interrupts. [ 47.773883] APIC timer calibration result 12500164 [ 47.773885] Detected 12.500 MHz APIC timer. [ 47.773941] Brought up 1 CPUs [ 47.774117] CPU0 attaching sched-domain: [ 47.774119] domain 0: span 01 [ 47.774121] groups: 01 [ 47.774283] net_namespace: 120 bytes [ 47.774684] Time: 9:01:27 Date: 03/14/08 [ 47.774733] NET: Registered protocol family 16 [ 47.774899] ACPI: bus type pci registered [ 47.774967] PCI: Using configuration type 1 [ 47.776068] ACPI: EC: Look up EC in DSDT [ 47.781211] ACPI: Interpreter enabled [ 47.781213] ACPI: (supports S0 S3 S4 S5) [ 47.781226] ACPI: Using IOAPIC for interrupt routing [ 47.781633] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 47.785004] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 47.785007] ACPI: EC: driver started in interrupt mode [ 47.785041] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 47.785984] PCI quirk: region 1000-103f claimed by ali7101 ACPI [ 47.786246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 47.786346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX_._PRT] [ 47.786441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT] [ 47.797263] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 47.797364] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [ 47.797463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 47.797561] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ 47.797660] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15) [ 47.797755] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 47.797857] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 14 15) [ 47.797953] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 47.798053] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 10 *11 14 15) [ 47.798139] ACPI: Power Resource [PUT2] (on) [ 47.798176] Linux Plug and Play Support v0.97 (c) Adam Belay [ 47.798201] pnp: PnP ACPI init [ 47.798208] ACPI: bus type pnp registered [ 47.799193] pnp: IRQ 13 override to edge, high [ 47.800005] pnp: PnP ACPI: found 10 devices [ 47.800007] ACPI: ACPI bus type pnp unregistered [ 47.800218] PCI: Using ACPI for IRQ routing [ 47.800220] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 47.800267] PCI: Cannot allocate resource region 0 of device 0000:00:11.0 [ 47.800268] PCI: Cannot allocate resource region 1 of device 0000:00:11.0 [ 47.800271] PCI: Cannot allocate resource region 2 of device 0000:00:11.0 [ 47.809862] NET: Registered protocol family 8 [ 47.809864] NET: Registered protocol family 20 [ 47.809975] AppArmor: AppArmor Filesystem Enabled [ 47.813822] Time: tsc clocksource has been installed. [ 47.821837] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 47.821840] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 47.821843] system 00:05: iomem range 0xd0000-0xdefff has been reserved [ 47.821845] system 00:05: iomem range 0xe0000000-0xe0ffffff has been reserved [ 47.821848] system 00:05: iomem range 0xfeb00000-0xfeb00fff has been reserved [ 47.821850] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 47.821852] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 47.821855] system 00:05: iomem range 0xfee00000-0xfee00fff could not be reserved [ 47.821860] system 00:07: ioport range 0x480-0x48f has been reserved [ 47.821862] system 00:07: ioport range 0x330-0x331 has been reserved [ 47.821864] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 47.821867] system 00:07: ioport range 0x1000-0x107f could not be reserved [ 47.821869] system 00:07: ioport range 0x1400-0x140f has been reserved [ 47.822241] PCI: Bridge: 0000:00:01.0 [ 47.822243] IO window: c000-dfff [ 47.822246] MEM window: c0000000-cfffffff [ 47.822248] PREFETCH window: 90000000-9fffffff [ 47.822250] PCI: Bus 3, cardbus bridge: 0000:00:10.0 [ 47.822252] IO window: 00001800-000018ff [ 47.822256] IO window: 00001c00-00001cff [ 47.822260] PREFETCH window: 50000000-53ffffff [ 47.822264] MEM window: 54000000-57ffffff [ 47.822268] PCI: Bridge: 0000:00:19.0 [ 47.822271] IO window: a000-bfff [ 47.822275] MEM window: b8000000-bfffffff [ 47.822278] PREFETCH window: 88000000-8fffffff [ 47.822301] PCI: Enabling device 0000:00:10.0 (0000 -> 0003) [ 47.822307] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 47.822325] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 47.822368] NET: Registered protocol family 2 [ 47.857854] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 47.858888] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 47.864339] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 47.865691] TCP: Hash tables configured (established 262144 bind 65536) [ 47.865694] TCP reno registered [ 47.873908] checking if image is initramfs... it is [ 48.324836] Switched to high resolution mode on CPU 0 [ 48.475105] Freeing initrd memory: 7440k freed [ 48.484993] audit: initializing netlink socket (disabled) [ 48.485010] audit(1205485288.204:1): initialized [ 48.487014] VFS: Disk quotas dquot_6.5.1 [ 48.487084] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 48.487211] io scheduler noop registered [ 48.487213] io scheduler anticipatory registered [ 48.487214] io scheduler deadline registered [ 48.487311] io scheduler cfq registered (default) [ 48.487318] PCI: MSI quirk detected. MSI deactivated. [ 48.487346] Boot video device is 0000:01:05.0 [ 48.513196] Real Time Clock Driver v1.12ac [ 48.513292] Linux agpgart interface v0.102 [ 48.513294] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 48.513520] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 48.514417] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 48.514485] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 48.514567] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 49.283197] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 49.294906] mice: PS/2 mouse device common for all mice [ 49.294938] cpuidle: using governor ladder [ 49.294940] cpuidle: using governor menu [ 49.295105] NET: Registered protocol family 1 [ 49.295183] registered taskstats version 1 [ 49.295333] Magic number: 0:945:19 [ 49.295496] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 49.295499] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 49.295501] EDD information not available. [ 49.295512] Freeing unused kernel memory: 316k freed [ 49.298640] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 50.473280] fuse init (API version 7.9) [ 50.490991] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 50.490997] ACPI: Processor [CPU0] (supports 8 throttling states) [ 50.971600] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 19 (level, low) -> IRQ 19 [ 51.021730] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d0000000-d00007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 51.123304] usbcore: registered new interface driver usbfs [ 51.123330] usbcore: registered new interface driver hub [ 51.136509] usbcore: registered new device driver usb [ 51.143221] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 51.167176] r8169 Gigabit Ethernet driver 2.2LK loaded [ 51.167223] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 51.167473] eth0: RTL8169sb/8110sb at 0xffffc200008da300, 00:40:d0:76:47:1f, XID 10000000 IRQ 16 [ 51.167997] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002) [ 51.168001] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 51.168274] ohci_hcd 0000:00:1c.0: OHCI Host Controller [ 51.168512] ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1 [ 51.168538] ohci_hcd 0000:00:1c.0: irq 20, io mem 0x58021000 [ 51.185915] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 51.186171] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 51.225154] usb usb1: configuration #1 chosen from 1 choice [ 51.225181] hub 1-0:1.0: USB hub found [ 51.225191] hub 1-0:1.0: 3 ports detected [ 51.326906] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002) [ 51.326921] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 51.327314] ohci_hcd 0000:00:1c.1: OHCI Host Controller [ 51.327383] ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 2 [ 51.327419] ohci_hcd 0000:00:1c.1: irq 18, io mem 0x58022000 [ 51.384837] usb usb2: configuration #1 chosen from 1 choice [ 51.384870] hub 2-0:1.0: USB hub found [ 51.384881] hub 2-0:1.0: 3 ports detected [ 51.486583] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002) [ 51.486593] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 51.487040] ohci_hcd 0000:00:1c.2: OHCI Host Controller [ 51.487115] ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 3 [ 51.487133] ohci_hcd 0000:00:1c.2: irq 20, io mem 0x58023000 [ 51.544496] usb usb3: configuration #1 chosen from 1 choice [ 51.544520] hub 3-0:1.0: USB hub found [ 51.544530] hub 3-0:1.0: 3 ports detected [ 51.622838] Marking TSC unstable due to TSC halts in idle [ 51.626205] Time: acpi_pm clocksource has been installed. [ 51.630225] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 51.646576] PCI: Enabling device 0000:00:1c.3 (0000 -> 0002) [ 51.646588] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 51.646928] ehci_hcd 0000:00:1c.3: EHCI Host Controller [ 51.647003] ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 4 [ 51.647044] ehci_hcd 0000:00:1c.3: debug port 1 [ 51.647066] ehci_hcd 0000:00:1c.3: irq 23, io mem 0x58024200 [ 51.829827] ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 51.829937] usb usb4: configuration #1 chosen from 1 choice [ 51.829961] hub 4-0:1.0: USB hub found [ 51.829968] hub 4-0:1.0: 8 ports detected [ 51.934008] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc7) at PCI slot 0000:00:1f.0 [ 51.934043] ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 51.934053] ALI15X3: not 100% native mode: will probe irqs later [ 51.934073] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio [ 51.934086] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio [ 51.934093] Probing IDE interface ide0... [ 52.225046] usb 1-1: device not accepting address 2, error -62 [ 52.436732] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d001002d964f] [ 52.892059] hda: ST9100823A, ATA DISK drive [ 52.892089] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 52.892591] hda: UDMA/100 mode selected [ 52.892820] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 52.895728] usb 1-1: new low speed USB device using ohci_hcd and address 4 [ 52.971413] Probing IDE interface ide1... [ 53.172363] usb 1-1: configuration #1 chosen from 1 choice [ 53.194194] usbcore: registered new interface driver hiddev [ 53.233337] input: HID 1241:1177 as /devices/pci0000:00/0000:00:1c.0/usb1/1-1/1-1:1.0/input/input2 [ 53.247065] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1c.0-1 [ 53.247080] usbcore: registered new interface driver usbhid [ 53.247083] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 54.041783] hdc: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive [ 54.041824] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 54.042012] hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } [ 54.042017] hdc: set_drive_speed_status: error=0x04 { AbortedCommand } [ 54.042025] hdc: UDMA/33 mode selected [ 54.043138] ide1 at 0x170-0x177,0x376 on irq 15 [ 54.053041] SCSI subsystem initialized [ 54.061903] libata version 3.00 loaded. [ 54.075335] hda: max request size: 512KiB [ 54.076289] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63 [ 54.078448] hda: cache flushes supported [ 54.078479] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > [ 54.276827] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 54.276834] Uniform CD-ROM driver Revision: 3.20 [ 54.792883] Attempting manual resume [ 54.792888] swsusp: Resume From Partition 3:6 [ 54.792890] PM: Checking swsusp image. [ 54.793044] PM: Resume from disk failed. [ 54.832461] kjournald starting. Commit interval 5 seconds [ 54.832478] EXT3-fs: mounted filesystem with ordered data mode. [ 66.805212] Yenta: CardBus bridge found at 0000:00:10.0 [1071:8317] [ 66.805237] Yenta: Using CSCINT to route CSC interrupts to PCI [ 66.805239] Yenta: Routing CardBus interrupts to PCI [ 66.805244] Yenta TI: socket 0000:00:10.0, mfunc 0x01ac1b22, devctl 0x66 [ 66.979855] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 67.036545] Yenta: ISA IRQ mask 0x0cf0, PCI irq 17 [ 67.036550] Socket status: 30000820 [ 67.095077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 67.267346] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 67.321835] input: Power Button (FF) as /devices/virtual/input/input4 [ 67.331119] ACPI: Power Button (FF) [PWRF] [ 67.331204] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 67.343087] ACPI: Sleep Button (CM) [SBTN] [ 67.343157] input: Lid Switch as /devices/virtual/input/input6 [ 67.343517] ACPI: Lid Switch [LID] [ 67.481452] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 67.481458] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted. [ 67.498891] ACPI: AC Adapter [AC] (on-line) [ 67.503353] ACPI: Battery Slot [BAT0] (battery present) [ 67.530809] ACPI: PCI Interrupt 0000:00:10.3[A] -> GSI 17 (level, low) -> IRQ 17 [ 67.654557] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 67.654564] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted. [ 67.706384] sdhci: Secure Digital Host Controller Interface driver [ 67.706389] sdhci: Copyright(c) Pierre Ossman [ 67.706435] sdhci: SDHCI controller found at 0000:00:10.4 [104c:8034] (rev 0) [ 67.706456] ACPI: PCI Interrupt 0000:00:10.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 67.706656] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 67.706754] mmc0: SDHCI at 0xd000a000 irq 17 DMA [ 67.706872] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it. [ 67.706952] mmc1: SDHCI at 0xd000a100 irq 17 DMA [ 67.707066] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it. [ 67.707145] mmc2: SDHCI at 0xd000a200 irq 17 DMA [ 67.730348] pccard: CardBus card inserted into slot 0 [ 68.666895] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 68.748979] [fglrx] Maximum main memory to use for locked dma buffers: 1044 MBytes. [ 68.749012] [fglrx] ASYNCIO init succeed! [ 68.749304] [fglrx] PAT is enabled successfully! [ 68.749746] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 69.166598] ACPI: PCI Interrupt 0000:00:1d.0[C] -> GSI 22 (level, low) -> IRQ 22 [ 69.197108] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... [ 70.414692] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) [ 70.414704] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 70.414713] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 70.424576] phy0: Selected rate control algorithm 'simple' [ 71.088943] loop: module loaded [ 71.216734] lp: driver loaded but no devices found [ 71.438096] Adding 1461872k swap on /dev/hda6. Priority:-1 extents:1 across:1461872k [ 74.467690] EXT3 FS on hda11, internal journal [ 80.375519] kjournald starting. Commit interval 5 seconds [ 80.375663] EXT3 FS on hda10, internal journal [ 80.375667] EXT3-fs: mounted filesystem with ordered data mode. [ 80.411182] kjournald starting. Commit interval 5 seconds [ 80.411363] EXT3 FS on hda5, internal journal [ 80.411366] EXT3-fs: mounted filesystem with ordered data mode. [ 80.611985] kjournald starting. Commit interval 5 seconds [ 80.612132] EXT3 FS on hda8, internal journal [ 80.612137] EXT3-fs: mounted filesystem with ordered data mode. [ 80.633034] kjournald starting. Commit interval 5 seconds [ 80.633204] EXT3 FS on hda9, internal journal [ 80.633206] EXT3-fs: mounted filesystem with ordered data mode. [ 81.203683] ip_tables: (C) 2000-2006 Netfilter Core Team [ 81.717376] No dock devices found. [ 82.061155] powernow-k8: Found 1 Mobile AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 82.061201] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 82.061203] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 82.061205] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe [ 82.061207] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18 [ 83.881173] ppdev: user-space parallel port driver [ 84.341185] audit(1205481724.347:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5068 profile="/usr/sbin/cupsd" namespace="default" [ 85.147348] Clocksource tsc unstable (delta = -100465172 ns) [ 86.673338] r8169: eth0: link down [ 86.764812] Bluetooth: Core ver 2.11 [ 86.765358] NET: Registered protocol family 31 [ 86.765361] Bluetooth: HCI device and connection manager initialized [ 86.765364] Bluetooth: HCI socket layer initialized [ 86.782537] Bluetooth: L2CAP ver 2.9 [ 86.782541] Bluetooth: L2CAP socket layer initialized [ 86.823674] Bluetooth: RFCOMM socket layer initialized [ 86.823686] Bluetooth: RFCOMM TTY layer initialized [ 86.823688] Bluetooth: RFCOMM ver 1.8 [ 88.407482] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 89.736097] [fglrx] GART Table is not in FRAME_BUFFER range [ 89.736105] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 89.736108] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000 [ 89.806402] [fglrx] interrupt source 20008000 successfully enabled [ 89.806407] [fglrx] enable ID = 0x00000004 [ 89.807058] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 96.558309] NET: Registered protocol family 10 [ 96.558844] lo: Disabled Privacy Extensions [ 96.559422] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 96.560081] ADDRCONF(NETDEV_UP): wlan0: link is not ready