[ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Mon Mar 10 15:32:00 UTC 2008 (Ubuntu 2.6.24-12.20-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000bf70000 (usable) [ 0.000000] BIOS-e820: 000000000bf70000 - 000000000bf7b000 (ACPI data) [ 0.000000] BIOS-e820: 000000000bf7b000 - 000000000bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000bf80000 - 000000000c000000 (reserved) [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 191MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6ae0 [ 0.000000] Entering add_active_range(0, 0, 49008) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 49008 [ 0.000000] HighMem 49008 -> 49008 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 49008 [ 0.000000] On node 0 totalpages: 49008 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 350 pages used for memmap [ 0.000000] Normal zone: 44562 pages, LIFO batch:7 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6B40 checksum 0 [ 0.000000] ACPI: RSDP 000F6B40, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 0BF75DD2, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 0BF7AF24, 0074 (r1 TOSCPL Chinook 6040000 ATI 3) [ 0.000000] ACPI: DSDT 0BF76786, 479E (r1 TOSCPL SB200 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 0BF7FFC0, 0040 [ 0.000000] ACPI: APIC 0BF7AF98, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 0BF75E02, 01FB (r1 PmRef CpuPm 3000 INTL 20030224) [ 0.000000] ACPI: DMI detected: Toshiba [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48626 [ 0.000000] Kernel command line: root=UUID=2da6b423-961a-4d5e-a30e-e552604d761b ro i8042.noacpi=1 [ 0.000000] Unknown boot option `i8042.noacpi=1': ignoring [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 3066.841 MHz processor. [ 32.823884] Console: colour VGA+ 80x25 [ 32.823888] console [tty0] enabled [ 32.826195] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 32.826390] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 32.830435] Memory: 182376k/196032k available (2164k kernel code, 13116k reserved, 1007k data, 364k init, 0k highmem) [ 32.830490] virtual kernel memory layout: [ 32.830492] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 32.830493] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 32.830494] vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB) [ 32.830495] lowmem : 0xc0000000 - 0xcbf70000 ( 191 MB) [ 32.830496] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 32.830497] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 32.830498] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 32.830765] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 32.830866] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 32.910714] Calibrating delay using timer specific routine.. 6137.36 BogoMIPS (lpj=12274735) [ 32.910806] Security Framework initialized [ 32.910844] SELinux: Disabled at boot. [ 32.910890] AppArmor: AppArmor initialized [ 32.910926] Failure registering capabilities with primary security module. [ 32.910969] Mount-cache hash table entries: 512 [ 32.911141] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 00000000 [ 32.911151] monitor/mwait feature present. [ 32.911185] using mwait in idle threads. [ 32.911224] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 32.911281] CPU: L2 cache: 1024K [ 32.911315] CPU: Physical Processor ID: 0 [ 32.911349] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000459d 00000000 00000000 00000000 [ 32.911361] Compat vDSO mapped to ffffe000. [ 32.911409] Checking 'hlt' instruction... OK. [ 32.927193] SMP alternatives: switching to UP code [ 32.929236] Early unpacking initramfs... done [ 33.214022] ACPI: Core revision 20070126 [ 33.214118] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 33.221847] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 04 [ 33.221986] SMP alternatives: switching to SMP code [ 33.222980] Booting processor 1/1 eip 3000 [ 33.233216] Initializing CPU#1 [ 33.313646] Calibrating delay using timer specific routine.. 6134.07 BogoMIPS (lpj=12268154) [ 33.313657] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 00000000 [ 33.313665] monitor/mwait feature present. [ 33.313672] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 33.313675] CPU: L2 cache: 1024K [ 33.313678] CPU: Physical Processor ID: 0 [ 33.313680] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000459d 00000000 00000000 00000000 [ 33.314061] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 04 [ 33.314424] Total of 2 processors activated (12271.44 BogoMIPS). [ 33.314527] ENABLING IO-APIC IRQs [ 33.314727] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 33.354369] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 33.354406] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 33.354468] ...trying to set up timer as Virtual Wire IRQ... works. [ 33.501315] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 33.521338] Brought up 2 CPUs [ 33.521399] CPU0 attaching sched-domain: [ 33.521403] domain 0: span 03 [ 33.521405] groups: 01 02 [ 33.521409] domain 1: span 03 [ 33.521411] groups: 03 [ 33.521413] CPU1 attaching sched-domain: [ 33.521415] domain 0: span 03 [ 33.521417] groups: 02 01 [ 33.521420] domain 1: span 03 [ 33.521422] groups: 03 [ 33.521716] net_namespace: 64 bytes [ 33.521758] Booting paravirtualized kernel on bare hardware [ 33.522460] Time: 9:55:58 Date: 03/14/08 [ 33.522561] NET: Registered protocol family 16 [ 33.522869] EISA bus registered [ 33.522908] ACPI: bus type pci registered [ 33.551720] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2 [ 33.551758] PCI: Using configuration type 1 [ 33.551791] Setting up standard PCI resources [ 33.556709] ACPI: EC: Look up EC in DSDT [ 33.559899] ACPI: Interpreter enabled [ 33.559938] ACPI: (supports S0 S3 S4 S5) [ 33.560075] ACPI: Using IOAPIC for interrupt routing [ 33.605933] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 33.605974] ACPI: EC: driver started in poll mode [ 33.606071] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 33.607138] PCI: Transparent bridge - 0000:00:14.4 [ 33.607249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 33.607360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 33.607514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 33.609907] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled. [ 33.610176] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled. [ 33.610440] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled. [ 33.610703] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled. [ 33.611012] Linux Plug and Play Support v0.97 (c) Adam Belay [ 33.611093] pnp: PnP ACPI init [ 33.611134] ACPI: bus type pnp registered [ 33.632922] pnp: PnP ACPI: found 11 devices [ 33.632958] ACPI: ACPI bus type pnp unregistered [ 33.632994] PnPBIOS: Disabled by ACPI PNP [ 33.633335] PCI: Using ACPI for IRQ routing [ 33.633372] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 33.656759] NET: Registered protocol family 8 [ 33.656795] NET: Registered protocol family 20 [ 33.656918] AppArmor: AppArmor Filesystem Enabled [ 33.660738] Time: tsc clocksource has been installed. [ 33.672760] system 00:07: ioport range 0x1080-0x1080 has been reserved [ 33.672798] system 00:07: ioport range 0x220-0x22f has been reserved [ 33.672834] system 00:07: ioport range 0x40b-0x40b has been reserved [ 33.672870] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 33.672906] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 33.672943] system 00:07: ioport range 0x530-0x537 has been reserved [ 33.672979] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 33.673015] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 33.673051] system 00:07: ioport range 0xc50-0xc52 has been reserved [ 33.673087] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 33.673123] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 33.673160] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 33.673196] system 00:07: ioport range 0x8000-0x805f has been reserved [ 33.673232] system 00:07: ioport range 0xf40-0xf47 has been reserved [ 33.673268] system 00:07: ioport range 0x280-0x293 has been reserved [ 33.673310] system 00:08: iomem range 0xe0000-0xfffff could not be reserved [ 33.673348] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved [ 33.673392] system 00:08: iomem range 0xe8000000-0xe8000fff has been reserved [ 33.703900] PCI: Bridge: 0000:00:01.0 [ 33.703936] IO window: 9000-9fff [ 33.703971] MEM window: e8100000-e81fffff [ 33.704006] PREFETCH window: f0000000-f7ffffff [ 33.704050] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 33.704084] IO window: 0000a400-0000a4ff [ 33.704120] IO window: 0000a800-0000a8ff [ 33.704156] PREFETCH window: 20000000-23ffffff [ 33.704193] MEM window: 24000000-27ffffff [ 33.704229] PCI: Bridge: 0000:00:14.4 [ 33.704263] IO window: a000-afff [ 33.704298] MEM window: e8200000-e82fffff [ 33.704333] PREFETCH window: disabled. [ 33.704399] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 33.704480] NET: Registered protocol family 2 [ 33.740624] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 33.740926] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 33.741724] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 33.741819] TCP: Hash tables configured (established 8192 bind 8192) [ 33.741856] TCP reno registered [ 33.752652] checking if image is initramfs... it is [ 34.199543] Switched to high resolution mode on CPU 1 [ 34.203299] Switched to high resolution mode on CPU 0 [ 34.319432] Freeing initrd memory: 7218k freed [ 34.320566] audit: initializing netlink socket (disabled) [ 34.320634] audit(1205488558.336:1): initialized [ 34.323287] VFS: Disk quotas dquot_6.5.1 [ 34.323426] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 34.323627] io scheduler noop registered [ 34.323662] io scheduler anticipatory registered [ 34.323697] io scheduler deadline registered [ 34.323740] io scheduler cfq registered (default) [ 34.838544] Boot video device is 0000:01:05.0 [ 34.838976] isapnp: Scanning for PnP cards... [ 35.189738] isapnp: No Plug & Play device found [ 35.227128] Real Time Clock Driver v1.12ac [ 35.227295] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 35.227546] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 35.228133] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 35.228205] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 35.229348] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.229489] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 35.229666] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 35.230000] i8042.c: Detected active multiplexing controller, rev 1.1. [ 35.230084] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.230123] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 35.230165] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 35.230213] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 35.230253] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 35.252499] mice: PS/2 mouse device common for all mice [ 35.252701] EISA: Probing bus 0 at eisa.0 [ 35.252741] Cannot allocate resource for EISA slot 1 [ 35.252794] Cannot allocate resource for EISA slot 8 [ 35.252828] EISA: Detected 0 cards. [ 35.252864] cpuidle: using governor ladder [ 35.252897] cpuidle: using governor menu [ 35.253039] NET: Registered protocol family 1 [ 35.253113] Using IPI No-Shortcut mode [ 35.253185] registered taskstats version 1 [ 35.253331] Magic number: 0:875:929 [ 35.253477] hash matches device ptyxe [ 35.253591] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 35.253632] EDD information not available. [ 35.254106] Freeing unused kernel memory: 364k freed [ 35.255291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 35.458829] fuse init (API version 7.9) [ 35.471950] ACPI: SSDT 0BF76308, 02B0 (r1 PmRef Cpu0Ist 3000 INTL 20030224) [ 35.472219] ACPI: SSDT 0BF76063, 0215 (r1 PmRef Cpu0Cst 3001 INTL 20030224) [ 35.473032] ACPI: Processor [CPU0] (supports 8 throttling states) [ 35.473258] ACPI: SSDT 0BF76278, 0090 (r1 PmRef Cpu1Ist 3000 INTL 20030224) [ 35.473498] ACPI: SSDT 0BF75FFD, 0066 (r1 PmRef Cpu1Cst 3000 INTL 20030224) [ 35.473816] ACPI: Processor [CPU1] (supports 8 throttling states) [ 35.679753] usbcore: registered new interface driver usbfs [ 35.679833] usbcore: registered new interface driver hub [ 35.680553] usbcore: registered new device driver usb [ 35.691258] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 35.693145] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 35.701840] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 35.701904] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 35.701999] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 35.702452] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 35.702525] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000 [ 35.763215] usb usb1: configuration #1 chosen from 1 choice [ 35.763304] hub 1-0:1.0: USB hub found [ 35.763351] hub 1-0:1.0: 3 ports detected [ 35.866864] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 35.866963] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 35.867040] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 35.867105] ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000 [ 35.926712] usb usb2: configuration #1 chosen from 1 choice [ 35.926799] hub 2-0:1.0: USB hub found [ 35.926845] hub 2-0:1.0: 3 ports detected [ 36.030563] ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at PCI slot 0000:00:14.1 [ 36.030633] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.030716] ATIIXP: not 100% native mode: will probe irqs later [ 36.030770] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio [ 36.030875] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio [ 36.030976] Probing IDE interface ide0... [ 36.078234] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 36.169878] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 36.370593] usb 1-1: configuration #1 chosen from 1 choice [ 36.739436] usbcore: registered new interface driver hiddev [ 36.743630] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input2 [ 36.756335] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1 [ 36.756505] usbcore: registered new interface driver usbhid [ 36.756549] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 36.987804] hda: FUJITSU MHT2030AT, ATA DISK drive [ 36.987912] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 36.989284] hda: UDMA/100 mode selected [ 36.990610] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 37.067265] Probing IDE interface ide1... [ 38.136652] hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive [ 38.136801] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 38.137176] hdc: UDMA/33 mode selected [ 38.137605] ide1 at 0x170-0x177,0x376 on irq 15 [ 38.139843] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.152974] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18 [ 38.153064] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 38.153146] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 38.153231] ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000 [ 38.189608] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8204000-e82047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 38.189688] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 38.189727] usb 1-1: USB disconnect, address 2 [ 38.190203] SCSI subsystem initialized [ 38.197740] usb usb3: configuration #1 chosen from 1 choice [ 38.197832] hub 3-0:1.0: USB hub found [ 38.197878] hub 3-0:1.0: 6 ports detected [ 38.201929] libata version 3.00 loaded. [ 38.300340] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 38.300411] 8139cp 0000:02:03.0: Try the "8139too" driver instead. [ 38.307021] 8139too Fast Ethernet driver 0.9.28 [ 38.307205] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 38.308155] eth0: RealTek RTL8139 at 0xa000, 00:02:3f:d7:20:86, IRQ 18 [ 38.308197] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 38.331807] hda: max request size: 128KiB [ 38.332077] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63 [ 38.333399] hda: cache flushes supported [ 38.333498] hda: hda1 hda2 < hda5 > [ 38.410347] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 38.410577] Uniform CD-ROM driver Revision: 3.20 [ 38.599741] Attempting manual resume [ 38.599778] swsusp: Resume From Partition 3:5 [ 38.599780] PM: Checking swsusp image. [ 38.600014] PM: Resume from disk failed. [ 38.650991] kjournald starting. Commit interval 5 seconds [ 38.651007] EXT3-fs: mounted filesystem with ordered data mode. [ 38.878441] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 39.087086] usb 1-1: configuration #1 chosen from 1 choice [ 39.094194] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input3 [ 39.105849] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1 [ 39.464980] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4756403923] [ 54.369703] hda: UDMA/100 mode selected [ 54.386735] hdc: UDMA/33 mode selected [ 55.514542] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 55.976718] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 56.116302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 56.160801] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 56.267960] parport_pc 00:0a: reported by Plug and Play ACPI [ 56.268033] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 56.324827] Linux agpgart interface v0.102 [ 56.391497] irda_init() [ 56.391537] NET: Registered protocol family 23 [ 56.600071] agpgart: Detected Ati IGP9100/M chipset [ 56.606670] agpgart: AGP aperture is 32M @ 0xea000000 [ 56.666940] input: Power Button (FF) as /devices/virtual/input/input5 [ 56.714632] ACPI: Power Button (FF) [PWRF] [ 56.714815] input: Lid Switch as /devices/virtual/input/input6 [ 56.730696] ACPI: Lid Switch [LID] [ 56.730841] input: Power Button (CM) as /devices/virtual/input/input7 [ 56.778438] ACPI: Power Button (CM) [PWRB] [ 56.942191] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227 [ 56.942256] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e [ 56.942310] smsc_ircc_present: can't get sir_base of 0x2f8 [ 57.244267] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01] [ 57.244360] Yenta: Using CSCINT to route CSC interrupts to PCI [ 57.244400] Yenta: Routing CardBus interrupts to PCI [ 57.244447] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44 [ 57.476278] Yenta: ISA IRQ mask 0x0a68, PCI irq 16 [ 57.476326] Socket status: 30000006 [ 57.476366] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 57.476407] cs: IO port probe 0xa000-0xafff: clean. [ 57.476911] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff [ 57.548868] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 57.549837] ACPI: AC Adapter [ACAD] (on-line) [ 57.691581] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input8 [ 57.739783] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 57.751285] ACPI: Battery Slot [BAT1] (battery present) [ 57.793438] sdhci: Secure Digital Host Controller Interface driver [ 57.793506] sdhci: Copyright(c) Pierre Ossman [ 57.793648] sdhci: SDHCI controller found at 0000:02:04.2 [1524:0550] (rev 0) [ 57.793735] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 57.793955] mmc0: SDHCI at 0xe8205000 irq 17 PIO [ 58.521494] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 58.522669] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/atiixp.c:526: atiixp: codec reset timeout [ 59.037992] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 59.890120] cs: IO port probe 0x100-0x3af: clean. [ 59.891350] cs: IO port probe 0x3e0-0x4ff: clean. [ 59.891933] cs: IO port probe 0x820-0x8ff: clean. [ 59.892444] cs: IO port probe 0xc00-0xcf7: clean. [ 59.893081] cs: IO port probe 0xa00-0xaff: clean. [ 60.153499] loop: module loaded [ 60.176908] lp0: using parport0 (interrupt-driven). [ 60.339129] Adding 554200k swap on /dev/hda5. Priority:-1 extents:1 across:554200k [ 60.840458] EXT3 FS on hda1, internal journal [ 61.707848] ip_tables: (C) 2000-2006 Netfilter Core Team [ 62.451945] No dock devices found. [ 62.533322] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 64.150106] NET: Registered protocol family 10 [ 64.150609] lo: Disabled Privacy Extensions [ 64.567353] apm: BIOS not found. [ 65.934876] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 68.112088] [drm] Initialized drm 1.1.0 20060810 [ 68.153216] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 68.153831] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 69.454096] NET: Registered protocol family 17 [ 69.487308] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 69.487342] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 69.487382] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode [ 71.116678] [drm] Setting GART location based on new memory map [ 71.116704] [drm] Loading R200 Microcode [ 71.116775] [drm] writeback test succeeded in 1 usecs [ 83.228741] eth0: no IPv6 routers present