[ 0.000000] Linux version 2.6.24-11-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 22:08:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000bf70000 (usable) [ 0.000000] BIOS-e820: 000000000bf70000 - 000000000bf7b000 (ACPI data) [ 0.000000] BIOS-e820: 000000000bf7b000 - 000000000bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000bf80000 - 000000000c000000 (reserved) [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 191MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6ae0 [ 0.000000] Entering add_active_range(0, 0, 49008) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 49008 [ 0.000000] HighMem 49008 -> 49008 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 49008 [ 0.000000] On node 0 totalpages: 49008 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 350 pages used for memmap [ 0.000000] Normal zone: 44562 pages, LIFO batch:7 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6B40 checksum 0 [ 0.000000] ACPI: RSDP 000F6B40, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 0BF75DD2, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 0BF7AF24, 0074 (r1 TOSCPL Chinook 6040000 ATI 3) [ 0.000000] ACPI: DSDT 0BF76786, 479E (r1 TOSCPL SB200 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 0BF7FFC0, 0040 [ 0.000000] ACPI: APIC 0BF7AF98, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 0BF75E02, 01FB (r1 PmRef CpuPm 3000 INTL 20030224) [ 0.000000] ACPI: DMI detected: Toshiba [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:3 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48626 [ 0.000000] Kernel command line: root=UUID=2da6b423-961a-4d5e-a30e-e552604d761b ro [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 3066.874 MHz processor. [ 9.375792] Console: colour VGA+ 80x25 [ 9.375797] console [tty0] enabled [ 9.378072] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.378267] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 9.382309] Memory: 182384k/196032k available (2164k kernel code, 13112k reserved, 1003k data, 364k init, 0k highmem) [ 9.382364] virtual kernel memory layout: [ 9.382365] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 9.382366] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.382367] vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB) [ 9.382368] lowmem : 0xc0000000 - 0xcbf70000 ( 191 MB) [ 9.382369] .init : 0xc041d000 - 0xc0478000 ( 364 kB) [ 9.382370] .data : 0xc031d12d - 0xc0417dc4 (1003 kB) [ 9.382371] .text : 0xc0100000 - 0xc031d12d (2164 kB) [ 9.382637] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.382737] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 9.462586] Calibrating delay using timer specific routine.. 6137.36 BogoMIPS (lpj=12274733) [ 9.462678] Security Framework initialized [ 9.462716] SELinux: Disabled at boot. [ 9.462762] AppArmor: AppArmor initialized [ 9.462799] Failure registering capabilities with primary security module. [ 9.462842] Mount-cache hash table entries: 512 [ 9.463012] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 00000000 [ 9.463022] monitor/mwait feature present. [ 9.463056] using mwait in idle threads. [ 9.463094] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 9.463151] CPU: L2 cache: 1024K [ 9.463185] CPU: Physical Processor ID: 0 [ 9.463219] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000459d 00000000 00000000 00000000 [ 9.463231] Compat vDSO mapped to ffffe000. [ 9.463279] Checking 'hlt' instruction... OK. [ 9.479070] SMP alternatives: switching to UP code [ 9.481119] Early unpacking initramfs... done [ 9.764705] ACPI: Core revision 20070126 [ 9.764808] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 9.770484] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 04 [ 9.770616] SMP alternatives: switching to SMP code [ 9.771628] Booting processor 1/1 eip 3000 [ 9.781870] Initializing CPU#1 [ 9.861528] Calibrating delay using timer specific routine.. 6133.98 BogoMIPS (lpj=12267960) [ 9.861539] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 00000000 [ 9.861548] monitor/mwait feature present. [ 9.861555] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 9.861558] CPU: L2 cache: 1024K [ 9.861561] CPU: Physical Processor ID: 0 [ 9.861563] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000459d 00000000 00000000 00000000 [ 9.861942] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 04 [ 9.862305] Total of 2 processors activated (12271.34 BogoMIPS). [ 9.862407] ENABLING IO-APIC IRQs [ 9.862604] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 9.902246] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 9.902283] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 9.902345] ...trying to set up timer as Virtual Wire IRQ... works. [ 10.049196] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 10.069219] Brought up 2 CPUs [ 10.069282] CPU0 attaching sched-domain: [ 10.069285] domain 0: span 03 [ 10.069287] groups: 01 02 [ 10.069291] domain 1: span 03 [ 10.069293] groups: 03 [ 10.069296] CPU1 attaching sched-domain: [ 10.069297] domain 0: span 03 [ 10.069299] groups: 02 01 [ 10.069302] domain 1: span 03 [ 10.069304] groups: 03 [ 10.069596] net_namespace: 64 bytes [ 10.069638] Booting paravirtualized kernel on bare hardware [ 10.070237] Time: 9:52:07 Date: 03/05/08 [ 10.070335] NET: Registered protocol family 16 [ 10.070641] EISA bus registered [ 10.070679] ACPI: bus type pci registered [ 10.099674] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2 [ 10.099711] PCI: Using configuration type 1 [ 10.099745] Setting up standard PCI resources [ 10.104632] ACPI: EC: Look up EC in DSDT [ 10.107864] ACPI: Interpreter enabled [ 10.107903] ACPI: (supports S0 S3 S4 S5) [ 10.108040] ACPI: Using IOAPIC for interrupt routing [ 10.153813] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 10.153852] ACPI: EC: driver started in poll mode [ 10.153943] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.155011] PCI: Transparent bridge - 0000:00:14.4 [ 10.155124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.155239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 10.155392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 10.157781] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled. [ 10.158049] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled. [ 10.158312] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled. [ 10.158573] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled. [ 10.158881] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.158959] pnp: PnP ACPI init [ 10.159001] ACPI: bus type pnp registered [ 10.180805] pnp: PnP ACPI: found 11 devices [ 10.180841] ACPI: ACPI bus type pnp unregistered [ 10.180878] PnPBIOS: Disabled by ACPI PNP [ 10.181213] PCI: Using ACPI for IRQ routing [ 10.181249] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.204644] NET: Registered protocol family 8 [ 10.204680] NET: Registered protocol family 20 [ 10.204802] AppArmor: AppArmor Filesystem Enabled [ 10.208621] Time: tsc clocksource has been installed. [ 10.220643] system 00:07: ioport range 0x1080-0x1080 has been reserved [ 10.220681] system 00:07: ioport range 0x220-0x22f has been reserved [ 10.220718] system 00:07: ioport range 0x40b-0x40b has been reserved [ 10.220754] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 10.220790] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 10.220827] system 00:07: ioport range 0x530-0x537 has been reserved [ 10.220864] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 10.220900] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 10.220936] system 00:07: ioport range 0xc50-0xc52 has been reserved [ 10.220972] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 10.221008] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 10.221044] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 10.221080] system 00:07: ioport range 0x8000-0x805f has been reserved [ 10.221116] system 00:07: ioport range 0xf40-0xf47 has been reserved [ 10.221152] system 00:07: ioport range 0x280-0x293 has been reserved [ 10.221193] system 00:08: iomem range 0xe0000-0xfffff could not be reserved [ 10.221231] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved [ 10.221275] system 00:08: iomem range 0xe8000000-0xe8000fff has been reserved [ 10.251772] PCI: Bridge: 0000:00:01.0 [ 10.251809] IO window: 9000-9fff [ 10.251843] MEM window: e8100000-e81fffff [ 10.251879] PREFETCH window: f0000000-f7ffffff [ 10.251923] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 10.251958] IO window: 0000a400-0000a4ff [ 10.251994] IO window: 0000a800-0000a8ff [ 10.252030] PREFETCH window: 20000000-23ffffff [ 10.252066] MEM window: 24000000-27ffffff [ 10.252103] PCI: Bridge: 0000:00:14.4 [ 10.252137] IO window: a000-afff [ 10.252172] MEM window: e8200000-e82fffff [ 10.252207] PREFETCH window: disabled. [ 10.252273] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.252354] NET: Registered protocol family 2 [ 10.288506] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 10.288794] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 10.288877] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 10.289670] TCP: Hash tables configured (established 8192 bind 8192) [ 10.289707] TCP reno registered [ 10.300542] checking if image is initramfs... it is [ 10.747424] Switched to high resolution mode on CPU 1 [ 10.751181] Switched to high resolution mode on CPU 0 [ 10.865303] Freeing initrd memory: 7220k freed [ 10.866421] audit: initializing netlink socket (disabled) [ 10.866487] audit(1204710727.328:1): initialized [ 10.869162] VFS: Disk quotas dquot_6.5.1 [ 10.869293] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.869493] io scheduler noop registered [ 10.869528] io scheduler anticipatory registered [ 10.869562] io scheduler deadline registered [ 10.869606] io scheduler cfq registered (default) [ 11.393429] Boot video device is 0000:01:05.0 [ 11.393847] isapnp: Scanning for PnP cards... [ 11.744821] isapnp: No Plug & Play device found [ 11.781705] Real Time Clock Driver v1.12ac [ 11.781871] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.782119] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 11.782708] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.782780] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 11.783692] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.783818] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 11.783992] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 11.784392] i8042.c: Detected active multiplexing controller, rev 1.1. [ 11.784472] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.784512] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 11.784557] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 11.784598] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 11.784634] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 11.812346] mice: PS/2 mouse device common for all mice [ 11.812549] EISA: Probing bus 0 at eisa.0 [ 11.812591] Cannot allocate resource for EISA slot 1 [ 11.812643] Cannot allocate resource for EISA slot 8 [ 11.812678] EISA: Detected 0 cards. [ 11.812713] cpuidle: using governor ladder [ 11.812747] cpuidle: using governor menu [ 11.812891] NET: Registered protocol family 1 [ 11.812966] Using IPI No-Shortcut mode [ 11.813038] registered taskstats version 1 [ 11.813188] Magic number: 0:647:878 [ 11.813337] hash matches device ptyx2 [ 11.813456] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 11.813493] EDD information not available. [ 11.813992] Freeing unused kernel memory: 364k freed [ 11.815129] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 12.018733] fuse init (API version 7.9) [ 12.031732] ACPI: SSDT 0BF76308, 02B0 (r1 PmRef Cpu0Ist 3000 INTL 20030224) [ 12.031998] ACPI: SSDT 0BF76063, 0215 (r1 PmRef Cpu0Cst 3001 INTL 20030224) [ 12.032810] ACPI: Processor [CPU0] (supports 8 throttling states) [ 12.033036] ACPI: SSDT 0BF76278, 0090 (r1 PmRef Cpu1Ist 3000 INTL 20030224) [ 12.033275] ACPI: SSDT 0BF75FFD, 0066 (r1 PmRef Cpu1Cst 3000 INTL 20030224) [ 12.033592] ACPI: Processor [CPU1] (supports 8 throttling states) [ 12.242803] usbcore: registered new interface driver usbfs [ 12.242888] usbcore: registered new interface driver hub [ 12.243730] usbcore: registered new device driver usb [ 12.255253] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 12.255306] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 12.273411] ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at PCI slot 0000:00:14.1 [ 12.273481] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.273563] ATIIXP: not 100% native mode: will probe irqs later [ 12.273608] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio [ 12.273712] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio [ 12.273814] Probing IDE interface ide0... [ 12.291593] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.378745] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 13.232585] hda: FUJITSU MHT2030AT, ATA DISK drive [ 13.232740] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 13.234086] hda: UDMA/100 mode selected [ 13.235443] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 13.313513] Probing IDE interface ide1... [ 14.385401] hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive [ 14.385548] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 14.385983] hdc: UDMA/33 mode selected [ 14.386411] ide1 at 0x170-0x177,0x376 on irq 15 [ 14.388671] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18 [ 14.388759] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 14.389212] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 14.389313] ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000 [ 14.398440] SCSI subsystem initialized [ 14.399155] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.399742] usb usb1: configuration #1 chosen from 1 choice [ 14.399845] hub 1-0:1.0: USB hub found [ 14.399891] hub 1-0:1.0: 6 ports detected [ 14.409292] libata version 3.00 loaded. [ 14.501228] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 14.501351] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 14.501453] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 14.501526] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000 [ 14.560892] usb usb2: configuration #1 chosen from 1 choice [ 14.560986] hub 2-0:1.0: USB hub found [ 14.561035] hub 2-0:1.0: 3 ports detected [ 14.660596] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 14.660702] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 14.660798] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 14.660865] ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000 [ 14.720431] usb usb3: configuration #1 chosen from 1 choice [ 14.720522] hub 3-0:1.0: USB hub found [ 14.720573] hub 3-0:1.0: 3 ports detected [ 14.824228] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 14.824292] 8139cp 0000:02:03.0: Try the "8139too" driver instead. [ 14.825190] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.874948] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8204000-e82047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 14.875068] 8139too Fast Ethernet driver 0.9.28 [ 14.875212] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 14.876139] eth0: RealTek RTL8139 at 0xa000, 00:02:3f:d7:20:86, IRQ 18 [ 14.876180] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 14.908962] hda: max request size: 128KiB [ 14.912885] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63 [ 14.914230] hda: cache flushes supported [ 14.914356] hda: hda1 hda2 < hda5 > [ 14.983942] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 14.984171] Uniform CD-ROM driver Revision: 3.20 [ 14.987783] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 15.196178] usb 2-1: configuration #1 chosen from 1 choice [ 15.213724] usbcore: registered new interface driver hiddev [ 15.218221] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input2 [ 15.234997] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1 [ 15.235181] usbcore: registered new interface driver usbhid [ 15.235225] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 15.311643] Attempting manual resume [ 15.311683] swsusp: Resume From Partition 3:5 [ 15.311686] PM: Checking swsusp image. [ 15.311928] PM: Resume from disk failed. [ 15.366904] kjournald starting. Commit interval 5 seconds [ 15.366920] EXT3-fs: mounted filesystem with ordered data mode. [ 16.140589] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4756403923] [ 27.278740] hda: UDMA/100 mode selected [ 27.287528] hdc: UDMA/33 mode selected [ 27.925447] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 28.283411] Linux agpgart interface v0.102 [ 28.470983] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 28.538715] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 28.631515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.683345] agpgart: Detected Ati IGP9100/M chipset [ 28.690551] agpgart: AGP aperture is 32M @ 0xea000000 [ 28.993494] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01] [ 28.993568] Yenta: Using CSCINT to route CSC interrupts to PCI [ 28.993608] Yenta: Routing CardBus interrupts to PCI [ 28.993650] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44 [ 29.114924] input: Power Button (FF) as /devices/virtual/input/input4 [ 29.124974] ACPI: Power Button (FF) [PWRF] [ 29.125154] input: Lid Switch as /devices/virtual/input/input5 [ 29.125284] ACPI: Lid Switch [LID] [ 29.125416] input: Power Button (CM) as /devices/virtual/input/input6 [ 29.140926] ACPI: Power Button (CM) [PWRB] [ 29.225564] Yenta: ISA IRQ mask 0x0eb8, PCI irq 16 [ 29.225612] Socket status: 30000006 [ 29.225652] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff [ 29.225694] cs: IO port probe 0xa000-0xafff: clean. [ 29.226165] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff [ 29.281907] sdhci: Secure Digital Host Controller Interface driver [ 29.281956] sdhci: Copyright(c) Pierre Ossman [ 29.282061] sdhci: SDHCI controller found at 0000:02:04.2 [1524:0550] (rev 0) [ 29.282123] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 29.282280] mmc0: SDHCI at 0xe8205000 irq 17 PIO [ 29.972982] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 29.978632] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/atiixp_modem.c:503: atiixp-modem: codec reset timeout [ 30.295779] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 30.296727] ACPI: AC Adapter [ACAD] (on-line) [ 30.359296] ACPI: Battery Slot [BAT1] (battery present) [ 30.702571] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input7 [ 30.737568] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 31.055960] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 31.137606] parport_pc 00:0a: reported by Plug and Play ACPI [ 31.137680] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 31.159707] irda_init() [ 31.159744] NET: Registered protocol family 23 [ 31.203943] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227 [ 31.204039] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e [ 31.204114] smsc_ircc_present: can't get sir_base of 0x2f8 [ 32.514284] cs: IO port probe 0x100-0x3af: clean. [ 32.515577] cs: IO port probe 0x3e0-0x4ff: clean. [ 32.516228] cs: IO port probe 0x820-0x8ff: clean. [ 32.516777] cs: IO port probe 0xc00-0xcf7: clean. [ 32.517484] cs: IO port probe 0xa00-0xaff: clean. [ 32.988008] loop: module loaded [ 33.001626] lp0: using parport0 (interrupt-driven). [ 33.109640] Adding 554200k swap on /dev/hda5. Priority:-1 extents:1 across:554200k [ 33.625301] EXT3 FS on hda1, internal journal [ 34.412132] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.158354] No dock devices found. [ 35.237172] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 36.470243] NET: Registered protocol family 10 [ 36.470775] lo: Disabled Privacy Extensions [ 36.901956] apm: BIOS not found. [ 38.220613] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 39.858177] [drm] Initialized drm 1.1.0 20060810 [ 39.869754] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.870345] [drm] Initialized radeon 1.28.0 20060524 on minor 0 [ 41.147098] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 41.147134] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 41.147172] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode [ 41.543171] NET: Registered protocol family 17 [ 42.391779] [drm] Setting GART location based on new memory map [ 42.391797] [drm] Loading R200 Microcode [ 42.391867] [drm] writeback test succeeded in 1 usecs [ 54.404079] eth0: no IPv6 routers present