[    0.000000] Linux version 2.6.24-11-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 22:08:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000bf70000 (usable)
[    0.000000]  BIOS-e820: 000000000bf70000 - 000000000bf7b000 (ACPI data)
[    0.000000]  BIOS-e820: 000000000bf7b000 - 000000000bf80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000000bf80000 - 000000000c000000 (reserved)
[    0.000000]  BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 191MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f6ae0
[    0.000000] Entering add_active_range(0, 0, 49008) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    49008
[    0.000000]   HighMem     49008 ->    49008
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    49008
[    0.000000] On node 0 totalpages: 49008
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 350 pages used for memmap
[    0.000000]   Normal zone: 44562 pages, LIFO batch:7
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6B40 checksum 0
[    0.000000] ACPI: RSDP 000F6B40, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 0BF75DD2, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 0BF7AF24, 0074 (r1 TOSCPL Chinook   6040000 ATI         3)
[    0.000000] ACPI: DSDT 0BF76786, 479E (r1 TOSCPL    SB200  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 0BF7FFC0, 0040
[    0.000000] ACPI: APIC 0BF7AF98, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
[    0.000000] ACPI: SSDT 0BF75E02, 01FB (r1  PmRef    CpuPm     3000 INTL 20030224)
[    0.000000] ACPI: DMI detected: Toshiba
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:3 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:3 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d8000
[    0.000000] swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48626
[    0.000000] Kernel command line: root=UUID=2da6b423-961a-4d5e-a30e-e552604d761b ro profile
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Detected 3066.915 MHz processor.
[   16.705317] Console: colour VGA+ 80x25
[   16.705322] console [tty0] enabled
[   16.707592] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[   16.707789] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[   16.711819] Memory: 182384k/196032k available (2164k kernel code, 13112k reserved, 1003k data, 364k init, 0k highmem)
[   16.711875] virtual kernel memory layout:
[   16.711877]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   16.711878]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   16.711879]     vmalloc : 0xcc800000 - 0xff7fe000   ( 815 MB)
[   16.711880]     lowmem  : 0xc0000000 - 0xcbf70000   ( 191 MB)
[   16.711881]       .init : 0xc041d000 - 0xc0478000   ( 364 kB)
[   16.711882]       .data : 0xc031d12d - 0xc0417dc4   (1003 kB)
[   16.711882]       .text : 0xc0100000 - 0xc031d12d   (2164 kB)
[   16.712150] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   16.712250] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   16.792100] Calibrating delay using timer specific routine.. 6137.37 BogoMIPS (lpj=12274742)
[   16.792192] Security Framework initialized
[   16.792230] SELinux:  Disabled at boot.
[   16.792276] AppArmor: AppArmor initialized
[   16.792313] Failure registering capabilities with primary security module.
[   16.792356] Mount-cache hash table entries: 512
[   16.792526] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 00000000
[   16.792535] monitor/mwait feature present.
[   16.792569] using mwait in idle threads.
[   16.792607] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   16.792665] CPU: L2 cache: 1024K
[   16.792699] CPU: Physical Processor ID: 0
[   16.792733] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000459d 00000000 00000000 00000000
[   16.792745] Compat vDSO mapped to ffffe000.
[   16.792793] Checking 'hlt' instruction... OK.
[   16.808581] SMP alternatives: switching to UP code
[   16.810642] Early unpacking initramfs... done
[   17.094248] ACPI: Core revision 20070126
[   17.094351] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   17.100842] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 04
[   17.100974] SMP alternatives: switching to SMP code
[   17.101986] Booting processor 1/1 eip 3000
[   17.112224] Initializing CPU#1
[   17.191041] Calibrating delay using timer specific routine.. 6134.08 BogoMIPS (lpj=12268165)
[   17.191053] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 00000000
[   17.191061] monitor/mwait feature present.
[   17.191068] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   17.191071] CPU: L2 cache: 1024K
[   17.191074] CPU: Physical Processor ID: 0
[   17.191076] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000459d 00000000 00000000 00000000
[   17.191456] CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 04
[   17.191818] Total of 2 processors activated (12271.45 BogoMIPS).
[   17.191920] ENABLING IO-APIC IRQs
[   17.192117] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   17.231759] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   17.231796] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   17.231858] ...trying to set up timer as Virtual Wire IRQ... works.
[   17.378709] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   17.398731] Brought up 2 CPUs
[   17.398793] CPU0 attaching sched-domain:
[   17.398797]  domain 0: span 03
[   17.398799]   groups: 01 02
[   17.398803]   domain 1: span 03
[   17.398805]    groups: 03
[   17.398808] CPU1 attaching sched-domain:
[   17.398809]  domain 0: span 03
[   17.398811]   groups: 02 01
[   17.398814]   domain 1: span 03
[   17.398816]    groups: 03
[   17.399110] net_namespace: 64 bytes
[   17.399152] Booting paravirtualized kernel on bare hardware
[   17.399750] Time: 21:36:15  Date: 03/03/08
[   17.399847] NET: Registered protocol family 16
[   17.400150] EISA bus registered
[   17.400189] ACPI: bus type pci registered
[   17.427187] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
[   17.427226] PCI: Using configuration type 1
[   17.427260] Setting up standard PCI resources
[   17.432212] ACPI: EC: Look up EC in DSDT
[   17.435429] ACPI: Interpreter enabled
[   17.435468] ACPI: (supports S0 S3 S4 S5)
[   17.435604] ACPI: Using IOAPIC for interrupt routing
[   17.479334] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[   17.479374] ACPI: EC: driver started in poll mode
[   17.479464] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   17.480532] PCI: Transparent bridge - 0000:00:14.4
[   17.480648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   17.480762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   17.480915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   17.483302] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[   17.483569] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[   17.483832] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[   17.484093] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[   17.484399] Linux Plug and Play Support v0.97 (c) Adam Belay
[   17.484479] pnp: PnP ACPI init
[   17.484520] ACPI: bus type pnp registered
[   17.506328] pnp: PnP ACPI: found 11 devices
[   17.506364] ACPI: ACPI bus type pnp unregistered
[   17.506400] PnPBIOS: Disabled by ACPI PNP
[   17.506733] PCI: Using ACPI for IRQ routing
[   17.506770] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   17.530168] NET: Registered protocol family 8
[   17.530203] NET: Registered protocol family 20
[   17.530324] AppArmor: AppArmor Filesystem Enabled
[   17.534145] Time: tsc clocksource has been installed.
[   17.546168] system 00:07: ioport range 0x1080-0x1080 has been reserved
[   17.546206] system 00:07: ioport range 0x220-0x22f has been reserved
[   17.546242] system 00:07: ioport range 0x40b-0x40b has been reserved
[   17.546278] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   17.546314] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[   17.546352] system 00:07: ioport range 0x530-0x537 has been reserved
[   17.546388] system 00:07: ioport range 0xc00-0xc01 has been reserved
[   17.546424] system 00:07: ioport range 0xc14-0xc14 has been reserved
[   17.546460] system 00:07: ioport range 0xc50-0xc52 has been reserved
[   17.546496] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[   17.546532] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[   17.546568] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[   17.546604] system 00:07: ioport range 0x8000-0x805f has been reserved
[   17.546640] system 00:07: ioport range 0xf40-0xf47 has been reserved
[   17.546676] system 00:07: ioport range 0x280-0x293 has been reserved
[   17.546718] system 00:08: iomem range 0xe0000-0xfffff could not be reserved
[   17.546756] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[   17.546800] system 00:08: iomem range 0xe8000000-0xe8000fff has been reserved
[   17.577295] PCI: Bridge: 0000:00:01.0
[   17.577331]   IO window: 9000-9fff
[   17.577366]   MEM window: e8100000-e81fffff
[   17.577401]   PREFETCH window: f0000000-f7ffffff
[   17.577445] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[   17.577480]   IO window: 0000a400-0000a4ff
[   17.577516]   IO window: 0000a800-0000a8ff
[   17.577552]   PREFETCH window: 20000000-23ffffff
[   17.577588]   MEM window: 24000000-27ffffff
[   17.577624] PCI: Bridge: 0000:00:14.4
[   17.577658]   IO window: a000-afff
[   17.577694]   MEM window: e8200000-e82fffff
[   17.577729]   PREFETCH window: disabled.
[   17.577795] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[   17.577876] NET: Registered protocol family 2
[   17.614033] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   17.614316] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   17.614400] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   17.615199] TCP: Hash tables configured (established 8192 bind 8192)
[   17.615235] TCP reno registered
[   17.626067] checking if image is initramfs... it is
[   18.072948] Switched to high resolution mode on CPU 1
[   18.076705] Switched to high resolution mode on CPU 0
[   18.190718] Freeing initrd memory: 7220k freed
[   18.191833] audit: initializing netlink socket (disabled)
[   18.191900] audit(1204580175.324:1): initialized
[   18.194559] VFS: Disk quotas dquot_6.5.1
[   18.194697] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   18.194899] io scheduler noop registered
[   18.194935] io scheduler anticipatory registered
[   18.194969] io scheduler deadline registered
[   18.195013] io scheduler cfq registered (default)
[   18.692038] Boot video device is 0000:01:05.0
[   18.692469] isapnp: Scanning for PnP cards...
[   19.043244] isapnp: No Plug & Play device found
[   19.080473] Real Time Clock Driver v1.12ac
[   19.080638] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   19.080890] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   19.081478] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[   19.081550] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[   19.082618] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   19.082759] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   19.082948] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   19.083285] i8042.c: Detected active multiplexing controller, rev 1.1.
[   19.083368] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.083407] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   19.083449] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   19.083491] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   19.083532] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   19.105973] mice: PS/2 mouse device common for all mice
[   19.106176] EISA: Probing bus 0 at eisa.0
[   19.106218] Cannot allocate resource for EISA slot 1
[   19.106270] Cannot allocate resource for EISA slot 8
[   19.106304] EISA: Detected 0 cards.
[   19.106340] cpuidle: using governor ladder
[   19.106374] cpuidle: using governor menu
[   19.106518] NET: Registered protocol family 1
[   19.106593] Using IPI No-Shortcut mode
[   19.106665] registered taskstats version 1
[   19.106813]   Magic number: 0:16:651
[   19.107034]   hash matches device PNP0A03:00
[   19.107072] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   19.107113] EDD information not available.
[   19.107626] Freeing unused kernel memory: 364k freed
[   19.108768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   19.312510] fuse init (API version 7.9)
[   19.325609] ACPI: SSDT 0BF76308, 02B0 (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
[   19.325877] ACPI: SSDT 0BF76063, 0215 (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
[   19.326710] ACPI: Processor [CPU0] (supports 8 throttling states)
[   19.326934] ACPI: SSDT 0BF76278, 0090 (r1  PmRef  Cpu1Ist     3000 INTL 20030224)
[   19.327173] ACPI: SSDT 0BF75FFD, 0066 (r1  PmRef  Cpu1Cst     3000 INTL 20030224)
[   19.327495] ACPI: Processor [CPU1] (supports 8 throttling states)
[   19.520084] usbcore: registered new interface driver usbfs
[   19.520166] usbcore: registered new interface driver hub
[   19.532797] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   19.532863] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   19.544736] usbcore: registered new device driver usb
[   19.560785] ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at  PCI slot 0000:00:14.1
[   19.560855] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[   19.560936] ATIIXP: not 100% native mode: will probe irqs later
[   19.560981]     ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[   19.561085]     ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[   19.561187] Probing IDE interface ide0...
[   19.588642] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   19.933033] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   20.518232] hda: FUJITSU MHT2030AT, ATA DISK drive
[   20.518341] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   20.519690] hda: UDMA/100 mode selected
[   20.521052] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   20.598704] Probing IDE interface ide1...
[   21.671086] hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive
[   21.671242] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   21.671616] hdc: UDMA/33 mode selected
[   21.672035] ide1 at 0x170-0x177,0x376 on irq 15
[   21.674073] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[   21.674203] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   21.674694] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   21.674776] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000
[   21.730904] usb usb1: configuration #1 chosen from 1 choice
[   21.730987] hub 1-0:1.0: USB hub found
[   21.731035] hub 1-0:1.0: 3 ports detected
[   21.834610] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[   21.834723] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   21.834809] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   21.834876] ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000
[   21.894437] usb usb2: configuration #1 chosen from 1 choice
[   21.894531] hub 2-0:1.0: USB hub found
[   21.894582] hub 2-0:1.0: 3 ports detected
[   21.998179] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[   21.998295] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   21.998377] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[   21.998498] ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000
[   22.137639] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   22.149601] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   22.149831] usb usb3: configuration #1 chosen from 1 choice
[   22.149924] hub 3-0:1.0: USB hub found
[   22.149973] hub 3-0:1.0: 6 ports detected
[   22.253665] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   22.253739] 8139cp 0000:02:03.0: Try the "8139too" driver instead.
[   22.256909] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   22.306689] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[e8204000-e82047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   22.307136] SCSI subsystem initialized
[   22.325069] 8139too Fast Ethernet driver 0.9.28
[   22.325275] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[   22.326406] eth0: RealTek RTL8139 at 0xa000, 00:02:3f:d7:20:86, IRQ 18
[   22.326451] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   22.327224] libata version 3.00 loaded.
[   22.352558] hda: max request size: 128KiB
[   22.354706] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63
[   22.356009] hda: cache flushes supported
[   22.356117]  hda: hda1 hda2 < hda5 >
[   22.427773] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   22.427986] Uniform CD-ROM driver Revision: 3.20
[   22.655924] Attempting manual resume
[   22.655962] swsusp: Resume From Partition 3:5
[   22.655964] PM: Checking swsusp image.
[   22.656203] PM: Resume from disk failed.
[   22.710599] kjournald starting.  Commit interval 5 seconds
[   22.710615] EXT3-fs: mounted filesystem with ordered data mode.
[   22.860683] usb 1-1: new low speed USB device using ohci_hcd and address 3
[   23.068231] usb 1-1: configuration #1 chosen from 1 choice
[   23.589910] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f4756403923]
[  148.098816] hda: UDMA/100 mode selected
[  148.175163] hdc: UDMA/33 mode selected
[  148.568647] input: PC Speaker as /devices/platform/pcspkr/input/input2
[  149.499629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  149.572526] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  149.668149] Linux agpgart interface v0.102
[  149.717353] agpgart: Detected Ati IGP9100/M chipset
[  149.723920] agpgart: AGP aperture is 32M @ 0xea000000
[  149.811899] parport_pc 00:0a: reported by Plug and Play ACPI
[  149.811984] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[  149.972896] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[  150.095464] irda_init()
[  150.095503] NET: Registered protocol family 23
[  150.158984] input: Power Button (FF) as /devices/virtual/input/input3
[  150.185705] ACPI: Power Button (FF) [PWRF]
[  150.185858] input: Lid Switch as /devices/virtual/input/input4
[  150.201758] ACPI: Lid Switch [LID]
[  150.201926] input: Power Button (CM) as /devices/virtual/input/input5
[  150.249551] ACPI: Power Button (CM) [PWRB]
[  150.466108] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227
[  150.466180] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
[  150.466235] smsc_ircc_present: can't get sir_base of 0x2f8
[  150.558160] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
[  150.558233] Yenta: Using CSCINT to route CSC interrupts to PCI
[  150.558276] Yenta: Routing CardBus interrupts to PCI
[  150.558320] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
[  150.789775] Yenta: ISA IRQ mask 0x0a78, PCI irq 16
[  150.789823] Socket status: 30000006
[  150.789863] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[  150.789904] cs: IO port probe 0xa000-0xafff: clean.
[  150.790388] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[  150.965425] ACPI: EC: non-query interrupt received, switching to interrupt mode
[  150.966127] ACPI: AC Adapter [ACAD] (on-line)
[  151.128369] sdhci: Secure Digital Host Controller Interface driver
[  151.128435] sdhci: Copyright(c) Pierre Ossman
[  151.128577] sdhci: SDHCI controller found at 0000:02:04.2 [1524:0550] (rev 0)
[  151.128643] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17
[  151.128905] mmc0: SDHCI at 0xe8205000 irq 17 PIO
[  151.452835] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input6
[  151.515101] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  151.527587] ACPI: Battery Slot [BAT1] (battery present)
[  151.578044] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[  151.585832] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/atiixp_modem.c:503: atiixp-modem: codec reset timeout
[  151.877523] usbcore: registered new interface driver hiddev
[  151.881880] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input7
[  151.917043] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
[  151.917224] usbcore: registered new interface driver usbhid
[  151.917266] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[  152.048750] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[  153.659851] cs: IO port probe 0x100-0x3af: clean.
[  153.661097] cs: IO port probe 0x3e0-0x4ff: clean.
[  153.661682] cs: IO port probe 0x820-0x8ff: clean.
[  153.662192] cs: IO port probe 0xc00-0xcf7: clean.
[  153.662819] cs: IO port probe 0xa00-0xaff: clean.
[  154.713210] loop: module loaded
[  154.737841] lp0: using parport0 (interrupt-driven).
[  155.132249] Adding 554200k swap on /dev/hda5.  Priority:-1 extents:1 across:554200k
[  155.814289] EXT3 FS on hda1, internal journal
[  157.438704] ip_tables: (C) 2000-2006 Netfilter Core Team
[  159.196057] No dock devices found.
[  159.264262] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[  162.855356] NET: Registered protocol family 10
[  162.855896] lo: Disabled Privacy Extensions
[  163.303895] apm: BIOS not found.
[  166.720383] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  170.475607] [drm] Initialized drm 1.1.0 20060810
[  170.487621] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[  170.488225] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[  171.191746] NET: Registered protocol family 17
[  171.736354] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[  171.736387] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[  171.736427] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[  173.365496] [drm] Setting GART location based on new memory map
[  173.365515] [drm] Loading R200 Microcode
[  173.365583] [drm] writeback test succeeded in 1 usecs
[  185.262623] eth0: no IPv6 routers present