[    0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic)
[    0.000000] Command line: root=UUID=da2383c2-389a-457e-bd25-2c35cf1be8c2 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000047fef000 (usable)
[    0.000000]  BIOS-e820: 0000000047ff0000 - 0000000047ffffc0 (ACPI data)
[    0.000000]  BIOS-e820: 0000000047ffffc0 - 0000000048000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 294895) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000E5010 checksum 0
[    0.000000] ACPI: RSDP 000E5010, 0014 (r0 OID_00)
[    0.000000] ACPI: RSDT 47FFC340, 0030 (r1 INSYDE FACP_000      100 0000    10200)
[    0.000000] ACPI: FACP 47FFFAC0, 0074 (r1 INSYDE FACP_000      100 0000    10200)
[    0.000000] ACPI: DSDT 47FFC380, 3736 (r1 INSYDE ATIRS480     1000 INTL 20040116)
[    0.000000] ACPI: FACS 47FFFFC0, 0040
[    0.000000] ACPI: APIC 47FFFB50, 0068 (r1 INSYDE APIC_000 30303030 0000    10200)
[    0.000000] ACPI: HPET 47FFFBC0, 0038 (r1 INSYDE HPET_000 30303030 0000 30303030)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 1 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000047fef000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 294895) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-0000000047fef000
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   294895
[    0.000000] On node 0 totalpages: 294798
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1204 pages reserved
[    0.000000]   DMA zone: 2739 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3975 pages used for memmap
[    0.000000]   DMA32 zone: 286824 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed0000000000000 is bogus
[    0.000000]  try hpet=force on the kernel command line to fix it up to 0xfed00000.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 48000000:b7f80000)
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 289563
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=da2383c2-389a-457e-bd25-2c35cf1be8c2 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[   13.981628] time.c: Detected 2000.069 MHz processor.
[   13.982420] Console: colour VGA+ 80x25
[   13.982424] console [tty0] enabled
[   13.982441] Checking aperture...
[   13.982445] CPU 0: aperture @ 0 size 32 MB
[   13.993950] No AGP bridge found
[   14.014639] Memory: 1150632k/1179580k available (2460k kernel code, 28560k reserved, 1302k data, 316k init)
[   14.014694] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   14.091410] Calibrating delay using timer specific routine.. 4004.10 BogoMIPS (lpj=8008201)
[   14.091462] Security Framework initialized
[   14.091471] SELinux:  Disabled at boot.
[   14.091489] AppArmor: AppArmor initialized
[   14.091495] Failure registering capabilities with primary security module.
[   14.091665] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   14.094456] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   14.095837] Mount-cache hash table entries: 256
[   14.096043] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   14.096046] CPU: L2 Cache: 1024K (64 bytes/line)
[   14.096049] CPU 0/0 -> Node 0
[   14.096079] SMP alternatives: switching to UP code
[   14.096894] Early unpacking initramfs... done
[   14.409946] ACPI: Core revision 20070126
[   14.410001] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   14.455379] Using local APIC timer interrupts.
[   14.505285] APIC timer calibration result 12500430
[   14.505287] Detected 12.500 MHz APIC timer.
[   14.505346] Brought up 1 CPUs
[   14.505523] CPU0 attaching sched-domain:
[   14.505526]  domain 0: span 01
[   14.505528]   groups: 01
[   14.505689] net_namespace: 120 bytes
[   14.506085] Time: 10:27:19  Date: 02/24/08
[   14.506137] NET: Registered protocol family 16
[   14.506308] ACPI: bus type pci registered
[   14.506377] PCI: Using configuration type 1
[   14.507497] ACPI: EC: Look up EC in DSDT
[   14.512658] ACPI: Interpreter enabled
[   14.512662] ACPI: (supports S0 S3 S4 S5)
[   14.512674] ACPI: Using IOAPIC for interrupt routing
[   14.513089] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   14.516442] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[   14.516444] ACPI: EC: driver started in interrupt mode
[   14.516479] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   14.517416] PCI quirk: region 1000-103f claimed by ali7101 ACPI
[   14.517675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   14.517775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX_._PRT]
[   14.517871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
[   14.528568] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[   14.528672] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[   14.528773] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[   14.528874] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[   14.528976] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15)
[   14.529074] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   14.529177] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 14 15)
[   14.529278] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[   14.529381] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 10 *11 14 15)
[   14.529468] ACPI: Power Resource [PUT2] (on)
[   14.529507] Linux Plug and Play Support v0.97 (c) Adam Belay
[   14.529534] pnp: PnP ACPI init
[   14.529541] ACPI: bus type pnp registered
[   14.530520] pnp: IRQ 13 override to edge, high
[   14.531339] pnp: PnP ACPI: found 10 devices
[   14.531341] ACPI: ACPI bus type pnp unregistered
[   14.531557] PCI: Using ACPI for IRQ routing
[   14.531560] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   14.531606] PCI: Cannot allocate resource region 0 of device 0000:00:11.0
[   14.531608] PCI: Cannot allocate resource region 1 of device 0000:00:11.0
[   14.531610] PCI: Cannot allocate resource region 2 of device 0000:00:11.0
[   14.541267] NET: Registered protocol family 8
[   14.541269] NET: Registered protocol family 20
[   14.541377] AppArmor: AppArmor Filesystem Enabled
[   14.545224] Time: tsc clocksource has been installed.
[   14.553241] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[   14.553244] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[   14.553247] system 00:05: iomem range 0xd0000-0xdefff has been reserved
[   14.553249] system 00:05: iomem range 0xe0000000-0xe0ffffff has been reserved
[   14.553252] system 00:05: iomem range 0xfeb00000-0xfeb00fff has been reserved
[   14.553254] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[   14.553257] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[   14.553260] system 00:05: iomem range 0xfee00000-0xfee00fff could not be reserved
[   14.553264] system 00:07: ioport range 0x480-0x48f has been reserved
[   14.553267] system 00:07: ioport range 0x330-0x331 has been reserved
[   14.553269] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   14.553272] system 00:07: ioport range 0x1000-0x107f could not be reserved
[   14.553274] system 00:07: ioport range 0x1400-0x140f has been reserved
[   14.553679] PCI: Bridge: 0000:00:01.0
[   14.553681]   IO window: c000-dfff
[   14.553683]   MEM window: c0000000-cfffffff
[   14.553685]   PREFETCH window: 90000000-9fffffff
[   14.553689] PCI: Bus 3, cardbus bridge: 0000:00:10.0
[   14.553691]   IO window: 00001800-000018ff
[   14.553695]   IO window: 00001c00-00001cff
[   14.553699]   PREFETCH window: 50000000-53ffffff
[   14.553704]   MEM window: 54000000-57ffffff
[   14.553708] PCI: Bridge: 0000:00:19.0
[   14.553710]   IO window: a000-bfff
[   14.553714]   MEM window: b8000000-bfffffff
[   14.553718]   PREFETCH window: 88000000-8fffffff
[   14.553741] PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
[   14.553747] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
[   14.553766] PCI: Setting latency timer of device 0000:00:19.0 to 64
[   14.553807] NET: Registered protocol family 2
[   14.589262] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   14.590285] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   14.595782] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   14.597152] TCP: Hash tables configured (established 262144 bind 65536)
[   14.597156] TCP reno registered
[   14.609300] checking if image is initramfs... it is
[   15.056248] Switched to high resolution mode on CPU 0
[   15.208231] Freeing initrd memory: 7404k freed
[   15.218124] audit: initializing netlink socket (disabled)
[   15.218138] audit(1203848839.196:1): initialized
[   15.220140] VFS: Disk quotas dquot_6.5.1
[   15.220207] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   15.220335] io scheduler noop registered
[   15.220337] io scheduler anticipatory registered
[   15.220339] io scheduler deadline registered
[   15.220433] io scheduler cfq registered (default)
[   15.220439] PCI: MSI quirk detected. MSI deactivated.
[   15.220467] Boot video device is 0000:01:05.0
[   15.246648] Real Time Clock Driver v1.12ac
[   15.246740] Linux agpgart interface v0.102
[   15.246743] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   15.246971] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   15.247885] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   15.247956] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   15.248042] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   16.018665] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.030336] mice: PS/2 mouse device common for all mice
[   16.030368] cpuidle: using governor ladder
[   16.030370] cpuidle: using governor menu
[   16.030534] NET: Registered protocol family 1
[   16.030608] registered taskstats version 1
[   16.030737]   Magic number: 12:762:477
[   16.030896] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   16.030906] Freeing unused kernel memory: 316k freed
[   16.034069] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   17.210341] fuse init (API version 7.9)
[   17.220363] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   17.220369] ACPI: Processor [CPU0] (supports 8 throttling states)
[   17.699553] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 19 (level, low) -> IRQ 19
[   17.749680] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[d0000000-d00007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   17.879550] usbcore: registered new interface driver usbfs
[   17.879574] usbcore: registered new interface driver hub
[   17.891991] r8169 Gigabit Ethernet driver 2.2LK loaded
[   17.892034] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
[   17.892282] eth0: RTL8169sb/8110sb at 0xffffc200008da300, 00:40:d0:76:47:1f, XID 10000000 IRQ 16
[   17.902644] usbcore: registered new device driver usb
[   17.910630] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   17.914327] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   17.918139] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   17.918184] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
[   17.918196] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
[   17.918520] ohci_hcd 0000:00:1c.0: OHCI Host Controller
[   17.918794] ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1
[   17.918819] ohci_hcd 0000:00:1c.0: irq 20, io mem 0x58021000
[   17.976626] usb usb1: configuration #1 chosen from 1 choice
[   17.976652] hub 1-0:1.0: USB hub found
[   17.976663] hub 1-0:1.0: 3 ports detected
[   18.078342] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
[   18.078357] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18
[   18.078766] ohci_hcd 0000:00:1c.1: OHCI Host Controller
[   18.078836] ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 2
[   18.078863] ohci_hcd 0000:00:1c.1: irq 18, io mem 0x58022000
[   18.136257] usb usb2: configuration #1 chosen from 1 choice
[   18.136283] hub 2-0:1.0: USB hub found
[   18.136293] hub 2-0:1.0: 3 ports detected
[   18.238024] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
[   18.238033] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 20
[   18.238454] ohci_hcd 0000:00:1c.2: OHCI Host Controller
[   18.238524] ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 3
[   18.238550] ohci_hcd 0000:00:1c.2: irq 20, io mem 0x58023000
[   18.295934] usb usb3: configuration #1 chosen from 1 choice
[   18.295961] hub 3-0:1.0: USB hub found
[   18.295971] hub 3-0:1.0: 3 ports detected
[   18.381167] Marking TSC unstable due to TSC halts in idle
[   18.381176] Time: acpi_pm clocksource has been installed.
[   18.381677] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   18.397844] PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
[   18.397857] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
[   18.398229] ehci_hcd 0000:00:1c.3: EHCI Host Controller
[   18.398302] ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 4
[   18.398342] ehci_hcd 0000:00:1c.3: debug port 1
[   18.398362] ehci_hcd 0000:00:1c.3: irq 23, io mem 0x58024200
[   18.581270] ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   18.581381] usb usb4: configuration #1 chosen from 1 choice
[   18.581404] hub 4-0:1.0: USB hub found
[   18.581412] hub 4-0:1.0: 8 ports detected
[   18.685364] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc7) at  PCI slot 0000:00:1f.0
[   18.685399] ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 21
[   18.685408] ALI15X3: not 100% native mode: will probe irqs later
[   18.685428]     ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[   18.685440]     ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[   18.685449] Probing IDE interface ide0...
[   18.976499] usb 1-1: device not accepting address 2, error -62
[   19.160252] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040d001002d964f]
[   19.643500] hda: ST9100823A, ATA DISK drive
[   19.643532] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[   19.643722] hda: UDMA/100 mode selected
[   19.644031] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   19.647237] usb 1-1: new low speed USB device using ohci_hcd and address 4
[   19.647272] Probing IDE interface ide1...
[   19.915839] usb 1-1: configuration #1 chosen from 1 choice
[   19.936773] usbcore: registered new interface driver hiddev
[   19.976813] input: HID 1241:1177 as /devices/pci0000:00/0000:00:1c.0/usb1/1-1/1-1:1.0/input/input2
[   19.986528] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1c.0-1
[   19.986545] usbcore: registered new interface driver usbhid
[   19.986549] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   20.717375] hdc: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive
[   20.717411] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[   20.717605] hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
[   20.717610] hdc: set_drive_speed_status: error=0x04 { AbortedCommand }
[   20.717618] hdc: UDMA/33 mode selected
[   20.718731] ide1 at 0x170-0x177,0x376 on irq 15
[   20.728861] SCSI subsystem initialized
[   20.736217] libata version 3.00 loaded.
[   20.751073] hda: max request size: 512KiB
[   20.752032] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63
[   20.752432] hda: cache flushes supported
[   20.752465]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
[   20.885715] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   20.885722] Uniform CD-ROM driver Revision: 3.20
[   21.390303] Attempting manual resume
[   21.390307] swsusp: Resume From Partition 3:6
[   21.390309] PM: Checking swsusp image.
[   21.411682] PM: Resume from disk failed.
[   21.452211] kjournald starting.  Commit interval 5 seconds
[   21.452227] EXT3-fs: mounted filesystem with ordered data mode.
[   30.393943] Yenta: CardBus bridge found at 0000:00:10.0 [1071:8317]
[   30.393967] Yenta: Using CSCINT to route CSC interrupts to PCI
[   30.393969] Yenta: Routing CardBus interrupts to PCI
[   30.393974] Yenta TI: socket 0000:00:10.0, mfunc 0x01ac1b22, devctl 0x66
[   30.454362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   30.626158] Yenta: ISA IRQ mask 0x0cf0, PCI irq 17
[   30.626163] Socket status: 30000820
[   30.693590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.846789] input: Power Button (FF) as /devices/virtual/input/input3
[   30.856951] ACPI: Power Button (FF) [PWRF]
[   30.857038] input: Sleep Button (CM) as /devices/virtual/input/input4
[   30.868921] ACPI: Sleep Button (CM) [SBTN]
[   30.869006] input: Lid Switch as /devices/virtual/input/input5
[   30.869370] ACPI: Lid Switch [LID]
[   30.971850] ACPI: PCI Interrupt 0000:00:10.3[A] -> GSI 17 (level, low) -> IRQ 17
[   31.016720] ACPI: AC Adapter [AC] (off-line)
[   31.021008] ACPI: Battery Slot [BAT0] (battery present)
[   31.046323] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
[   31.046328] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
[   31.092566] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[   31.092573] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
[   31.126208] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   31.166042] sdhci: Secure Digital Host Controller Interface driver
[   31.166047] sdhci: Copyright(c) Pierre Ossman
[   31.166099] sdhci: SDHCI controller found at 0000:00:10.4 [104c:8034] (rev 0)
[   31.166120] ACPI: PCI Interrupt 0000:00:10.4[A] -> GSI 17 (level, low) -> IRQ 17
[   31.166357] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   31.166455] mmc0: SDHCI at 0xd000a000 irq 17 DMA
[   31.166571] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[   31.166656] mmc1: SDHCI at 0xd000a100 irq 17 DMA
[   31.166772] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[   31.166855] mmc2: SDHCI at 0xd000a200 irq 17 DMA
[   31.328016] pccard: CardBus card inserted into slot 0
[   32.710978] ACPI: PCI Interrupt 0000:00:1d.0[C] -> GSI 22 (level, low) -> IRQ 22
[   32.742858] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[   34.297592] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[   34.297604] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   34.297614] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   34.307487] phy0: Selected rate control algorithm 'simple'
[   35.045571] loop: module loaded
[   35.131305] lp: driver loaded but no devices found
[   35.362246] Adding 1461872k swap on /dev/hda6.  Priority:-1 extents:1 across:1461872k
[   35.613932] EXT3 FS on hda11, internal journal
[   36.382579] kjournald starting.  Commit interval 5 seconds
[   36.382729] EXT3 FS on hda10, internal journal
[   36.382733] EXT3-fs: mounted filesystem with ordered data mode.
[   36.418235] kjournald starting.  Commit interval 5 seconds
[   36.418413] EXT3 FS on hda5, internal journal
[   36.418415] EXT3-fs: mounted filesystem with ordered data mode.
[   36.574872] kjournald starting.  Commit interval 5 seconds
[   36.574889] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   36.575067] EXT3 FS on hda8, internal journal
[   36.575070] EXT3-fs: mounted filesystem with ordered data mode.
[   36.595908] kjournald starting.  Commit interval 5 seconds
[   36.596076] EXT3 FS on hda9, internal journal
[   36.596079] EXT3-fs: mounted filesystem with ordered data mode.
[   37.191600] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.681128] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   37.698010] No dock devices found.
[   37.995167] powernow-k8: Found 1 Mobile AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[   37.995214] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
[   37.995217] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
[   37.995219] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0xe
[   37.995221] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x18
[   39.284423] NET: Registered protocol family 10
[   39.284644] lo: Disabled Privacy Extensions
[   39.403100] ppdev: user-space parallel port driver
[   39.764105] audit(1203845264.808:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4856 profile="/usr/sbin/cupsd" namespace="default"
[   41.782892] Clocksource tsc unstable (delta = -216415345 ns)
[   42.746836] r8169: eth0: link down
[   42.747965] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   42.810287] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   42.811363] Bluetooth: Core ver 2.11
[   42.811410] NET: Registered protocol family 31
[   42.811412] Bluetooth: HCI device and connection manager initialized
[   42.811416] Bluetooth: HCI socket layer initialized
[   42.830441] Bluetooth: L2CAP ver 2.9
[   42.830444] Bluetooth: L2CAP socket layer initialized
[   42.897497] Bluetooth: RFCOMM socket layer initialized
[   42.897510] Bluetooth: RFCOMM TTY layer initialized
[   42.897511] Bluetooth: RFCOMM ver 1.8
[   44.291913] [drm] Initialized drm 1.1.0 20060810
[   44.305104] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[   44.305157] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[   45.705923] [drm] Setting GART location based on new memory map
[   45.706586] [drm] Loading R300 Microcode
[   45.706601] [drm] writeback test succeeded in 1 usecs
[   65.241788] NET: Registered protocol family 17
[   66.071245] wlan0: Initial auth_alg=0
[   66.071252] wlan0: authenticate with AP 00:13:f7:10:0e:60
[   66.151201] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[   66.151206] wlan0: authenticated
[   66.151208] wlan0: associate with AP 00:13:f7:10:0e:60
[   66.181566] wlan0: RX AssocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[   66.181572] wlan0: associated
[   66.181577] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[   66.182943] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   73.272130] wlan0: no IPv6 routers present
[   79.198158] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[   79.540254] wlan0: Initial auth_alg=0
[   79.540259] wlan0: authenticate with AP 00:13:f7:10:0e:60
[   79.544638] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[   79.544642] wlan0: authenticated
[   79.544644] wlan0: associate with AP 00:13:f7:10:0e:60
[   79.556706] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[   79.556709] wlan0: associated
[   79.556712] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[   80.847602] wlan0: no IPv6 routers present
[  101.545849] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  101.888732] wlan0: Initial auth_alg=0
[  101.888738] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  101.906759] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  101.906762] wlan0: authenticated
[  101.906764] wlan0: associate with AP 00:13:f7:10:0e:60
[  101.906953] wlan0: authentication frame received from 00:13:f7:10:0e:60, but not in authenticate state - ignored
[  101.908098] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  101.908101] wlan0: associated
[  101.908104] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  217.615902] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  218.299965] wlan0: Initial auth_alg=0
[  218.299972] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  218.318119] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  218.318123] wlan0: authenticated
[  218.318126] wlan0: associate with AP 00:13:f7:10:0e:60
[  218.323394] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  218.323398] wlan0: associated
[  218.323403] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  218.325112] wlan0: association frame received from 00:13:f7:10:0e:60, but not in associate state - ignored
[  331.770945] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  332.113131] wlan0: Initial auth_alg=0
[  332.113138] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  332.128375] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  332.128380] wlan0: authenticated
[  332.128382] wlan0: associate with AP 00:13:f7:10:0e:60
[  332.129675] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  332.129678] wlan0: associated
[  332.129681] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  332.927018] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  333.264464] wlan0: Initial auth_alg=0
[  333.264470] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  333.272449] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  333.272452] wlan0: authenticated
[  333.272455] wlan0: associate with AP 00:13:f7:10:0e:60
[  333.285578] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  333.285582] wlan0: associated
[  333.285585] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  333.287918] wlan0: association frame received from 00:13:f7:10:0e:60, but not in associate state - ignored
[  427.584500] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  427.926696] wlan0: Initial auth_alg=0
[  427.926702] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  427.929202] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  427.929204] wlan0: authenticated
[  427.929207] wlan0: associate with AP 00:13:f7:10:0e:60
[  427.934434] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  427.934437] wlan0: associated
[  427.934440] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  581.930297] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  582.272464] wlan0: Initial auth_alg=0
[  582.272470] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  582.275642] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  582.275646] wlan0: authenticated
[  582.275648] wlan0: associate with AP 00:13:f7:10:0e:60
[  582.316338] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  582.316341] wlan0: associated
[  582.316344] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  583.113516] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  583.452531] wlan0: Initial auth_alg=0
[  583.452537] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  583.460883] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  583.460886] wlan0: authenticated
[  583.460888] wlan0: associate with AP 00:13:f7:10:0e:60
[  583.461179] wlan0: authentication frame received from 00:13:f7:10:0e:60, but not in authenticate state - ignored
[  583.467086] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  583.467089] wlan0: associated
[  583.467093] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  663.805033] ACPI: EC: acpi_ec_wait timeout, status = 0, expect_event = 1
[  663.805038] ACPI: EC: read timeout, command = 128
[  663.805042] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
[  663.805049] ACPI Exception (dswexec-0462): AE_TIME, While resolving operands for [OpcodeName unavailable] [20070126]
[  663.805056] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node ffff81004531b1e0), AE_TIME
[  663.805088] ACPI Exception (battery-0356): AE_TIME, Evaluating _BST [20070126]
[  680.145802] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  680.490901] wlan0: Initial auth_alg=0
[  680.490906] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  680.504729] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  680.504732] wlan0: authenticated
[  680.504734] wlan0: associate with AP 00:13:f7:10:0e:60
[  680.520384] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  680.520388] wlan0: associated
[  680.520391] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  782.592397] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  782.955298] wlan0: Initial auth_alg=0
[  782.955304] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  782.961663] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  782.961667] wlan0: authenticated
[  782.961670] wlan0: associate with AP 00:13:f7:10:0e:60
[  782.964388] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  782.964391] wlan0: associated
[  782.964395] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  783.762852] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  784.100259] wlan0: Initial auth_alg=0
[  784.100265] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  784.110882] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  784.110885] wlan0: authenticated
[  784.110888] wlan0: associate with AP 00:13:f7:10:0e:60
[  784.111872] wlan0: authentication frame received from 00:13:f7:10:0e:60, but not in authenticate state - ignored
[  784.121759] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  784.121763] wlan0: associated
[  784.121766] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  784.123190] wlan0: association frame received from 00:13:f7:10:0e:60, but not in associate state - ignored
[  813.663675] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[  814.007476] wlan0: Initial auth_alg=0
[  814.007482] wlan0: authenticate with AP 00:13:f7:10:0e:60
[  814.008737] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[  814.008741] wlan0: authenticated
[  814.008743] wlan0: associate with AP 00:13:f7:10:0e:60
[  814.012516] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[  814.012519] wlan0: associated
[  814.012522] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[  814.015859] wlan0: association frame received from 00:13:f7:10:0e:60, but not in associate state - ignored
[ 1024.428437] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[ 1024.770641] wlan0: Initial auth_alg=0
[ 1024.770647] wlan0: authenticate with AP 00:13:f7:10:0e:60
[ 1024.781716] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[ 1024.781720] wlan0: authenticated
[ 1024.781722] wlan0: associate with AP 00:13:f7:10:0e:60
[ 1024.785564] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[ 1024.785568] wlan0: associated
[ 1024.785571] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)
[ 1024.787699] wlan0: association frame received from 00:13:f7:10:0e:60, but not in associate state - ignored
[ 1102.674648] gnome-screensav[12924]: segfault at 3d4 rip 7fd8e9138d51 rsp 7ffff1342810 error 4
[ 1106.322399] wlan0: No ProbeResp from current AP 00:13:f7:10:0e:60 - assume out of range
[ 1107.176208] wlan0: Initial auth_alg=0
[ 1107.176215] wlan0: authenticate with AP 00:13:f7:10:0e:60
[ 1107.180945] wlan0: RX authentication from 00:13:f7:10:0e:60 (alg=0 transaction=2 status=0)
[ 1107.180948] wlan0: authenticated
[ 1107.180951] wlan0: associate with AP 00:13:f7:10:0e:60
[ 1107.204177] wlan0: RX ReassocResp from 00:13:f7:10:0e:60 (capab=0x471 status=0 aid=1)
[ 1107.204181] wlan0: associated
[ 1107.204186] wlan0: switched to short barker preamble (BSSID=00:13:f7:10:0e:60)