[ 0.000000] Linux version 2.6.24-10-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Fri Feb 22 18:26:06 UTC 2008 (Ubuntu 2.6.24-10.16-generic) [ 0.000000] Command line: root=UUID=04bd1900-39cd-4dec-bb78-65ce78bd5f35 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff00000 (usable) [ 0.000000] BIOS-e820: 000000007ff00000 - 000000007ff15000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff15000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524032) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F88F0 checksum 0 [ 0.000000] ACPI: RSDP 000F88F0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 7FF0BB67, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FF14B58, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7FF0BBA7, 8FB1 (r1 HP MCP51M 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FF15FC0, 0040 [ 0.000000] ACPI: SSDT 7FF14BCC, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7FF14D90, 003C (r1 HP MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7FF14DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7FF14E04, 005E (r1 HP APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FF14E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FF14E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff00000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524032) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 524032 [ 0.000000] On node 0 totalpages: 523933 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1211 pages reserved [ 0.000000] DMA zone: 2730 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512828 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515558 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=04bd1900-39cd-4dec-bb78-65ce78bd5f35 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 24.821157] Marking TSC unstable due to TSCs unsynchronized [ 24.821159] time.c: Detected 1808.230 MHz processor. [ 24.823810] Console: colour VGA+ 80x25 [ 24.823813] console [tty0] enabled [ 24.823831] Checking aperture... [ 24.823833] CPU 0: aperture @ e310000000 size 32 MB [ 24.823835] Aperture too small (32 MB) [ 24.830747] No AGP bridge found [ 24.854537] Memory: 2054632k/2096128k available (2465k kernel code, 41100k reserved, 1311k data, 316k init) [ 24.854569] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 24.931082] Calibrating delay using timer specific routine.. 3619.56 BogoMIPS (lpj=7239129) [ 24.931117] Security Framework initialized [ 24.931122] SELinux: Disabled at boot. [ 24.931136] AppArmor: AppArmor initialized [ 24.931140] Failure registering capabilities with primary security module. [ 24.931311] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 24.932808] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 24.933520] Mount-cache hash table entries: 256 [ 24.933654] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.933656] CPU: L2 Cache: 512K (64 bytes/line) [ 24.933659] CPU 0/0 -> Node 0 [ 24.933661] CPU: Physical Processor ID: 0 [ 24.933662] CPU: Processor Core ID: 0 [ 24.933686] SMP alternatives: switching to UP code [ 24.934275] Early unpacking initramfs... done [ 25.267277] ACPI: Core revision 20070126 [ 25.267352] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.518150] Using local APIC timer interrupts. [ 25.573435] APIC timer calibration result 12557157 [ 25.573437] Detected 12.557 MHz APIC timer. [ 25.573531] SMP alternatives: switching to SMP code [ 25.574008] Booting processor 1/2 APIC 0x1 [ 25.584763] Initializing CPU#1 [ 25.662081] Calibrating delay using timer specific routine.. 3616.47 BogoMIPS (lpj=7232959) [ 25.662088] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 25.662090] CPU: L2 Cache: 512K (64 bytes/line) [ 25.662092] CPU 1/1 -> Node 0 [ 25.662094] CPU: Physical Processor ID: 0 [ 25.662096] CPU: Processor Core ID: 1 [ 25.662183] AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 [ 25.662198] AMD C1E detected late. Force timer broadcast. [ 25.661585] Brought up 2 CPUs [ 25.661738] CPU0 attaching sched-domain: [ 25.661741] domain 0: span 03 [ 25.661743] groups: 01 02 [ 25.661746] domain 1: span 03 [ 25.661748] groups: 03 [ 25.661750] CPU1 attaching sched-domain: [ 25.661751] domain 0: span 03 [ 25.661753] groups: 02 01 [ 25.661755] domain 1: span 03 [ 25.661757] groups: 03 [ 25.661997] net_namespace: 120 bytes [ 25.662453] Time: 19:38:48 Date: 03/01/08 [ 25.662510] NET: Registered protocol family 16 [ 25.662710] ACPI: bus type pci registered [ 25.662785] PCI: Using configuration type 1 [ 25.664088] ACPI: EC: Look up EC in DSDT [ 25.666122] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 25.666377] ACPI: Interpreter enabled [ 25.666380] ACPI: (supports S0 S3 S4 S5) [ 25.666393] ACPI: Using IOAPIC for interrupt routing [ 25.667792] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 25.674016] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 25.674020] ACPI: EC: driver started in interrupt mode [ 25.674082] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.675460] PCI: Transparent bridge - 0000:00:10.0 [ 25.675478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.675584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 25.675614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 25.675650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 25.675684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 25.713845] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 25.714060] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 25.714271] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11 [ 25.714480] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 25.714690] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11 [ 25.714900] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 25.715110] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 25.715320] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 25.715531] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 25.715740] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 25.715949] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 25.716159] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 25.716369] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 25.716579] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 25.716792] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 25.717003] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 25.717214] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 25.717433] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 25.717648] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 25.717787] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.717817] pnp: PnP ACPI init [ 25.717825] ACPI: bus type pnp registered [ 25.721587] pnp: PnP ACPI: found 13 devices [ 25.721590] ACPI: ACPI bus type pnp unregistered [ 25.721880] PCI: Using ACPI for IRQ routing [ 25.721884] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.734194] NET: Registered protocol family 8 [ 25.734196] NET: Registered protocol family 20 [ 25.734308] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 25.734313] hpet0: 3 32-bit timers, 25000000 Hz [ 25.735370] AppArmor: AppArmor Filesystem Enabled [ 25.737503] Time: hpet clocksource has been installed. [ 25.737507] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 25.737510] Could not switch to high resolution mode on CPU 0 [ 25.742184] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 25.742188] Could not switch to high resolution mode on CPU 1 [ 25.750219] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved [ 25.750227] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 25.750230] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 25.750234] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 25.750237] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 25.750244] system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved [ 25.750250] system 00:04: ioport range 0x1000-0x107f has been reserved [ 25.750253] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 25.750256] system 00:04: ioport range 0x1400-0x147f has been reserved [ 25.750259] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 25.750262] system 00:04: ioport range 0x1800-0x187f has been reserved [ 25.750265] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 25.750268] system 00:04: ioport range 0x2000-0x203f has been reserved [ 25.750274] system 00:05: ioport range 0x360-0x361 has been reserved [ 25.750277] system 00:05: ioport range 0x380-0x383 has been reserved [ 25.750280] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 25.750735] PCI: Bridge: 0000:00:02.0 [ 25.750737] IO window: 4000-4fff [ 25.750740] MEM window: c2000000-c3ffffff [ 25.750742] PREFETCH window: c8200000-c83fffff [ 25.750745] PCI: Bridge: 0000:00:03.0 [ 25.750746] IO window: disabled. [ 25.750749] MEM window: c4000000-c5ffffff [ 25.750751] PREFETCH window: disabled. [ 25.750756] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0 [ 25.750758] PCI: Bridge: 0000:00:04.0 [ 25.750760] IO window: 5000-5fff [ 25.750762] MEM window: c6000000-c7ffffff [ 25.750764] PREFETCH window: d0000000-dfffffff [ 25.750768] PCI: Bridge: 0000:00:10.0 [ 25.750769] IO window: disabled. [ 25.750772] MEM window: c8000000-c80fffff [ 25.750774] PREFETCH window: disabled. [ 25.750786] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.750793] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 25.750800] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 25.750807] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 25.750861] NET: Registered protocol family 2 [ 25.794268] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 25.795102] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 25.798000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 25.798716] TCP: Hash tables configured (established 262144 bind 65536) [ 25.798720] TCP reno registered [ 25.810304] checking if image is initramfs... it is [ 26.511897] Freeing initrd memory: 7396k freed [ 26.516976] Simple Boot Flag at 0x36 set to 0x1 [ 26.517168] audit: initializing netlink socket (disabled) [ 26.517180] audit(1204400328.448:1): initialized [ 26.519295] VFS: Disk quotas dquot_6.5.1 [ 26.519369] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 26.519498] io scheduler noop registered [ 26.519501] io scheduler anticipatory registered [ 26.519502] io scheduler deadline registered [ 26.519606] io scheduler cfq registered (default) [ 26.733330] Boot video device is 0000:05:00.0 [ 26.733511] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 26.733534] assign_interrupt_mode Found MSI capability [ 26.733554] Allocate Port Service[0000:00:02.0:pcie00] [ 26.733619] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 26.733641] assign_interrupt_mode Found MSI capability [ 26.733656] Allocate Port Service[0000:00:03.0:pcie00] [ 26.733714] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 26.733736] assign_interrupt_mode Found MSI capability [ 26.733752] Allocate Port Service[0000:00:04.0:pcie00] [ 26.761803] Real Time Clock Driver v1.12ac [ 26.762005] hpet_resources: 0xfed00000 is busy [ 26.762051] Linux agpgart interface v0.102 [ 26.762053] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.763123] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.763193] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 26.763289] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 26.780825] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.780831] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.793020] mice: PS/2 mouse device common for all mice [ 26.793057] cpuidle: using governor ladder [ 26.793059] cpuidle: using governor menu [ 26.793208] NET: Registered protocol family 1 [ 26.793269] registered taskstats version 1 [ 26.793546] Magic number: 0:651:646 [ 26.793605] hash matches device ptydb [ 26.793693] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 26.793696] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 26.793698] EDD information not available. [ 26.793707] Freeing unused kernel memory: 316k freed [ 26.829632] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 28.010154] fuse init (API version 7.9) [ 28.019834] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 28.019916] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 28.022453] ACPI: Thermal Zone [THRM] (45 C) [ 28.460223] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 28.460239] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 28.460250] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 28.499165] usbcore: registered new interface driver usbfs [ 28.499191] usbcore: registered new interface driver hub [ 28.508058] usbcore: registered new device driver usb [ 28.520470] SCSI subsystem initialized [ 28.520100] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 28.524548] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 28.524565] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 28.524768] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 28.524776] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 28.525077] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 28.525123] ehci_hcd 0000:00:0b.1: debug port 1 [ 28.525128] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 28.525144] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xc0005000 [ 28.534934] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 28.540683] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.540838] usb usb1: configuration #1 chosen from 1 choice [ 28.540862] hub 1-0:1.0: USB hub found [ 28.540870] hub 1-0:1.0: 8 ports detected [ 28.586849] libata version 3.00 loaded. [ 28.644494] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 28.644500] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 28.644675] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 28.644683] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 28.644743] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 28.644765] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xc0004000 [ 28.702104] usb usb2: configuration #1 chosen from 1 choice [ 28.702130] hub 2-0:1.0: USB hub found [ 28.702141] hub 2-0:1.0: 8 ports detected [ 28.804714] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 28.805112] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 28.805125] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 28.805132] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 28.883832] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 29.027009] usb 1-4: configuration #1 chosen from 1 choice [ 29.328970] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:0c:ed:92 [ 29.328976] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 29.329585] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 29.329723] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) [ 29.329150] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 29.329168] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 5 (level, high) -> IRQ 5 [ 29.330419] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 29.330432] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23 [ 29.330467] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 29.330479] ACPI: PCI interrupt for device 0000:00:0e.0 disabled [ 29.330807] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 [ 29.330809] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 29.330829] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 29.330838] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 29.381344] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[c8000000-c80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 29.389834] sata_nv 0000:00:0e.0: version 3.5 [ 29.389852] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23 [ 29.390057] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 29.391398] scsi0 : sata_nv [ 29.392157] scsi1 : sata_nv [ 29.392388] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 [ 29.392392] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 [ 29.871993] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.884240] ata1.00: ATA-7: ST9120821AS, 7.24, max UDMA/100 [ 29.884243] ata1.00: 234441648 sectors, multi 16: LBA48 [ 29.908225] ata1.00: configured for UDMA/100 [ 30.227782] ata2: SATA link down (SStatus 0 SControl 300) [ 30.238820] scsi 0:0:0:0: Direct-Access ATA ST9120821AS 7.24 PQ: 0 ANSI: 5 [ 30.238908] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 30.239125] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 30.239595] scsi2 : sata_nv [ 30.239817] scsi3 : sata_nv [ 30.239990] ata3: SATA max UDMA/133 cmd 0x30d8 ctl 0x30cc bmdma 0x30a0 irq 20 [ 30.239995] ata4: SATA max UDMA/133 cmd 0x30d0 ctl 0x30c8 bmdma 0x30a8 irq 20 [ 30.675629] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b003e000800] [ 30.715539] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.727785] ata3.00: ATA-7: ST9120821AS, 7.24, max UDMA/100 [ 30.727788] ata3.00: 234441648 sectors, multi 16: LBA48 [ 30.751771] ata3.00: configured for UDMA/100 [ 31.062661] ata4: SATA link down (SStatus 0 SControl 300) [ 31.074386] scsi 2:0:0:0: Direct-Access ATA ST9120821AS 7.24 PQ: 0 ANSI: 5 [ 31.076865] pata_amd 0000:00:0d.0: version 0.3.10 [ 31.076922] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 31.076498] scsi4 : pata_amd [ 31.076561] scsi5 : pata_amd [ 31.077169] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 31.077172] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 31.088517] Driver 'sd' needs updating - please use bus_type methods [ 31.088708] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 31.088720] sd 0:0:0:0: [sda] Write Protect is off [ 31.088723] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.088738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.088803] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 31.088811] sd 0:0:0:0: [sda] Write Protect is off [ 31.088813] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 31.088827] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.088830] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 31.113022] sd 0:0:0:0: [sda] Attached SCSI disk [ 31.113088] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 31.113099] sd 2:0:0:0: [sdb] Write Protect is off [ 31.113102] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 31.113116] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.113155] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 31.113163] sd 2:0:0:0: [sdb] Write Protect is off [ 31.113166] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 31.113183] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 31.113186] sdb: sdb1 sdb2 sdb3 [ 31.127774] sd 2:0:0:0: [sdb] Attached SCSI disk [ 31.133062] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 31.133084] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 31.394890] ata5.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2 [ 31.442825] Attempting manual resume [ 31.442829] swsusp: Resume From Partition 8:6 [ 31.442831] PM: Checking swsusp image. [ 31.443071] PM: Resume from disk failed. [ 31.470687] kjournald starting. Commit interval 5 seconds [ 31.471377] EXT3-fs: mounted filesystem with ordered data mode. [ 31.566854] ata5.00: configured for MWDMA2 [ 31.566900] ata6: port disabled. ignoring. [ 31.569500] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5 [ 31.569586] scsi 4:0:0:0: Attached scsi generic sg2 type 5 [ 39.539055] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 39.698777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.746775] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.797284] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 39.797292] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 40.166123] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 40.166145] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 40.258966] ricoh-mmc: Ricoh MMC Controller disabling driver [ 40.258971] ricoh-mmc: Copyright(c) Philip Langdale [ 40.259508] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1) [ 40.259521] ricoh-mmc: Controller is now disabled. [ 40.290444] sdhci: Secure Digital Host Controller Interface driver [ 40.290449] sdhci: Copyright(c) Pierre Ossman [ 40.290504] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19) [ 40.290869] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 40.290882] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 7 (level, high) -> IRQ 7 [ 40.291028] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 40.291122] mmc0: SDHCI at 0xc8000800 irq 7 DMA [ 40.450616] ACPI: Battery Slot [BAT0] (battery present) [ 40.450810] input: Power Button (FF) as /devices/virtual/input/input3 [ 40.451218] ACPI: AC Adapter [ACAD] (on-line) [ 40.494358] ACPI: Power Button (FF) [PWRF] [ 40.494421] input: Power Button (CM) as /devices/virtual/input/input4 [ 40.558232] ACPI: Power Button (CM) [PWRB] [ 40.558297] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 40.622197] ACPI: Sleep Button (CM) [SLPB] [ 40.622264] input: Lid Switch as /devices/virtual/input/input6 [ 40.654564] ACPI: Lid Switch [LID] [ 40.654650] ACPI: WMI-Acer: Mapper loaded [ 40.656211] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7 [ 40.722152] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 40.723760] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/LNXVIDEO:01/input/input8 [ 40.786103] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 41.081665] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 41.143462] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 41.255413] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 41.255427] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 41.255596] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 41.338048] nvidia: module license 'NVIDIA' taints kernel. [ 41.626658] Driver 'sr' needs updating - please use bus_type methods [ 41.639359] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 41.639366] Uniform CD-ROM driver Revision: 3.20 [ 41.639430] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 41.671758] Linux video capture interface: v2.00 [ 41.701277] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16 [ 41.701290] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK1E] -> GSI 16 (level, high) -> IRQ 16 [ 41.701299] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 41.701479] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 [ 41.717172] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 41.725723] usbcore: registered new interface driver uvcvideo [ 41.725728] USB Video Class driver (v0.1.0) [ 41.814961] b43-phy0: Broadcom 4311 WLAN found [ 41.883790] phy0: Selected rate control algorithm 'simple' [ 43.218557] loop: module loaded [ 43.276569] lp: driver loaded but no devices found [ 43.505132] Adding 2048184k swap on /dev/sda6. Priority:-1 extents:1 across:2048184k [ 44.114477] EXT3 FS on sda8, internal journal [ 44.972713] kjournald starting. Commit interval 5 seconds [ 44.973583] EXT3 FS on sda7, internal journal [ 44.973591] EXT3-fs: mounted filesystem with ordered data mode. [ 45.015337] kjournald starting. Commit interval 5 seconds [ 45.016178] EXT3 FS on sda1, internal journal [ 45.016183] EXT3-fs: mounted filesystem with ordered data mode. [ 46.401223] ip_tables: (C) 2000-2006 Netfilter Core Team [ 46.935512] No dock devices found. [ 46.950179] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 47.234179] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (2 cpu cores) (version 2.20.00) [ 47.233555] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 47.233560] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15 [ 47.233562] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e [ 48.565422] NET: Registered protocol family 10 [ 48.565681] lo: Disabled Privacy Extensions [ 48.686128] ppdev: user-space parallel port driver [ 49.036482] audit(1204396751.904:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5295 profile="/usr/sbin/cupsd" namespace="default" [ 49.584746] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 49.584753] vboxdrv: Successfully done. [ 49.584813] vboxdrv: Successfully loaded version 1.5.4_OSE (interface 0x00050002). [ 49.842570] tun: Universal TUN/TAP device driver, 1.6 [ 49.842575] tun: (C) 1999-2004 Max Krasnyansky [ 49.940030] Clocksource tsc unstable (delta = -277801118 ns) [ 51.474729] input: b43-phy0 as /devices/virtual/input/input10 [ 51.490265] Bluetooth: Core ver 2.11 [ 51.490599] NET: Registered protocol family 31 [ 51.490602] Bluetooth: HCI device and connection manager initialized [ 51.490607] Bluetooth: HCI socket layer initialized [ 51.518673] Bluetooth: L2CAP ver 2.9 [ 51.518679] Bluetooth: L2CAP socket layer initialized [ 51.555238] Bluetooth: RFCOMM socket layer initialized [ 51.555253] Bluetooth: RFCOMM TTY layer initialized [ 51.555255] Bluetooth: RFCOMM ver 1.8 [ 52.074642] Registered led device: b43-phy0:tx [ 52.075126] Registered led device: b43-phy0:rx [ 52.075480] Registered led device: b43-phy0:radio [ 52.122465] b43-phy0: Radio hardware status changed to DISABLED [ 52.126877] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 52.206858] b43-phy0: Radio turned on by software [ 52.206865] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. [ 53.483435] NET: Registered protocol family 17 [ 62.923188] eth0: no IPv6 routers present [ 71.774765] CPU0 attaching NULL sched-domain. [ 71.774773] CPU1 attaching NULL sched-domain. [ 71.792162] CPU0 attaching sched-domain: [ 71.792166] domain 0: span 03 [ 71.792168] groups: 01 02 [ 71.792171] domain 1: span 03 [ 71.792173] groups: 03 [ 71.792175] CPU1 attaching sched-domain: [ 71.792177] domain 0: span 03 [ 71.792178] groups: 02 01 [ 71.792181] domain 1: span 03 [ 71.792182] groups: 03 [ 805.931624] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 805.931631] vboxdrv: Successfully done. [ 805.935392] vboxdrv: Successfully loaded version 1.5.4_OSE (interface 0x00050002).