[ 0.000000] microcode: microcode updated early to revision 0xea, date = 2021-01-05 [ 0.000000] Linux version 5.11.0-25-generic (buildd@lgw01-amd64-038) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #27~20.04.1-Ubuntu SMP Tue Jul 13 17:41:23 UTC 2021 (Ubuntu 5.11.0-25.27~20.04.1-generic 5.11.22) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.11.0-25-generic root=/dev/mapper/vgkubuntu-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000006b7a2fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006b7a3000-0x0000000070656fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000070657000-0x0000000070657fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000070658000-0x000000007b537fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b538000-0x000000007b599fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007b59a000-0x000000007b5fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: LENOVO 20HES0FW00/20HES0FW00, BIOS N1QET90W (1.65 ) 10/19/2020 [ 0.000000] tsc: Detected 2700.000 MHz processor [ 0.000000] tsc: Detected 2699.909 MHz TSC [ 0.000589] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000591] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000597] last_pfn = 0x47e800 max_arch_pfn = 0x400000000 [ 0.000600] MTRR default type: write-back [ 0.000601] MTRR fixed ranges enabled: [ 0.000602] 00000-9FFFF write-back [ 0.000603] A0000-BFFFF uncachable [ 0.000604] C0000-FFFFF write-protect [ 0.000605] MTRR variable ranges enabled: [ 0.000606] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000608] 1 base 007E000000 mask 7FFE000000 uncachable [ 0.000609] 2 base 007D000000 mask 7FFF000000 uncachable [ 0.000610] 3 disabled [ 0.000611] 4 disabled [ 0.000611] 5 disabled [ 0.000612] 6 disabled [ 0.000612] 7 disabled [ 0.000613] 8 disabled [ 0.000614] 9 disabled [ 0.000752] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001724] last_pfn = 0x6b7a3 max_arch_pfn = 0x400000000 [ 0.007992] check: Scanning 1 areas for low memory corruption [ 0.007996] Using GB pages for direct mapping [ 0.008127] RAMDISK: [mem 0x2d271000-0x3292ffff] [ 0.008132] ACPI: Early table checksum verification disabled [ 0.008135] ACPI: RSDP 0x00000000000F0140 000024 (v02 LENOVO) [ 0.008138] ACPI: XSDT 0x000000007B5C1188 0000F4 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008143] ACPI: FACP 0x000000007B5F7000 0000F4 (v05 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008147] ACPI: DSDT 0x000000007B5D1000 02151D (v02 LENOVO SKL 00000000 INTL 20160527) [ 0.008150] ACPI: FACS 0x000000007B547000 000040 [ 0.008153] ACPI: UEFI 0x000000007B55C000 000042 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008155] ACPI: SSDT 0x000000007B5F9000 0030E4 (v02 LENOVO SaSsdt 00003000 INTL 20160527) [ 0.008158] ACPI: SSDT 0x000000007B5F8000 0005B6 (v02 LENOVO PerfTune 00001000 INTL 20160527) [ 0.008161] ACPI: HPET 0x000000007B5F6000 000038 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008163] ACPI: APIC 0x000000007B5F5000 0000BC (v03 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008166] ACPI: MCFG 0x000000007B5F4000 00003C (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008168] ACPI: ECDT 0x000000007B5F3000 000053 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008171] ACPI: SSDT 0x000000007B5D0000 00021C (v01 LENOVO Rmv_Batt 00001000 INTL 20160527) [ 0.008173] ACPI: SSDT 0x000000007B5CE000 00174F (v02 LENOVO ProjSsdt 00000010 INTL 20160527) [ 0.008176] ACPI: BOOT 0x000000007B5CD000 000028 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008179] ACPI: BATB 0x000000007B5CC000 00004A (v02 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008181] ACPI: SLIC 0x000000007B5CB000 000176 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008184] ACPI: SSDT 0x000000007B5C9000 0017AE (v02 LENOVO CpuSsdt 00003000 INTL 20160527) [ 0.008186] ACPI: SSDT 0x000000007B5C8000 00056D (v02 LENOVO CtdpB 00001000 INTL 20160527) [ 0.008189] ACPI: SSDT 0x000000007B5C7000 000634 (v02 LENOVO UsbCTabl 00001000 INTL 20160527) [ 0.008192] ACPI: WSMT 0x000000007B5C6000 000028 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008194] ACPI: SSDT 0x000000007B5C5000 000141 (v02 LENOVO HdaDsp 00000000 INTL 20160527) [ 0.008197] ACPI: SSDT 0x000000007B5C4000 0004C5 (v02 LENOVO TbtTypeC 00000000 INTL 20160527) [ 0.008200] ACPI: DBGP 0x000000007B5C3000 000034 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008202] ACPI: DBG2 0x000000007B5C2000 000054 (v00 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008205] ACPI: MSDM 0x000000007B5FD000 000055 (v03 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008208] ACPI: DMAR 0x000000007B5C0000 0000A8 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008210] ACPI: ASF! 0x000000007B5BF000 0000A0 (v32 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008213] ACPI: FPDT 0x000000007B5BE000 000044 (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008215] ACPI: UEFI 0x000000007B544000 00013E (v01 LENOVO TP-N1Q 00001650 PTEC 00000002) [ 0.008218] ACPI: Reserving FACP table memory at [mem 0x7b5f7000-0x7b5f70f3] [ 0.008219] ACPI: Reserving DSDT table memory at [mem 0x7b5d1000-0x7b5f251c] [ 0.008220] ACPI: Reserving FACS table memory at [mem 0x7b547000-0x7b54703f] [ 0.008221] ACPI: Reserving UEFI table memory at [mem 0x7b55c000-0x7b55c041] [ 0.008221] ACPI: Reserving SSDT table memory at [mem 0x7b5f9000-0x7b5fc0e3] [ 0.008222] ACPI: Reserving SSDT table memory at [mem 0x7b5f8000-0x7b5f85b5] [ 0.008223] ACPI: Reserving HPET table memory at [mem 0x7b5f6000-0x7b5f6037] [ 0.008224] ACPI: Reserving APIC table memory at [mem 0x7b5f5000-0x7b5f50bb] [ 0.008225] ACPI: Reserving MCFG table memory at [mem 0x7b5f4000-0x7b5f403b] [ 0.008225] ACPI: Reserving ECDT table memory at [mem 0x7b5f3000-0x7b5f3052] [ 0.008226] ACPI: Reserving SSDT table memory at [mem 0x7b5d0000-0x7b5d021b] [ 0.008227] ACPI: Reserving SSDT table memory at [mem 0x7b5ce000-0x7b5cf74e] [ 0.008228] ACPI: Reserving BOOT table memory at [mem 0x7b5cd000-0x7b5cd027] [ 0.008228] ACPI: Reserving BATB table memory at [mem 0x7b5cc000-0x7b5cc049] [ 0.008229] ACPI: Reserving SLIC table memory at [mem 0x7b5cb000-0x7b5cb175] [ 0.008230] ACPI: Reserving SSDT table memory at [mem 0x7b5c9000-0x7b5ca7ad] [ 0.008231] ACPI: Reserving SSDT table memory at [mem 0x7b5c8000-0x7b5c856c] [ 0.008232] ACPI: Reserving SSDT table memory at [mem 0x7b5c7000-0x7b5c7633] [ 0.008232] ACPI: Reserving WSMT table memory at [mem 0x7b5c6000-0x7b5c6027] [ 0.008233] ACPI: Reserving SSDT table memory at [mem 0x7b5c5000-0x7b5c5140] [ 0.008234] ACPI: Reserving SSDT table memory at [mem 0x7b5c4000-0x7b5c44c4] [ 0.008235] ACPI: Reserving DBGP table memory at [mem 0x7b5c3000-0x7b5c3033] [ 0.008236] ACPI: Reserving DBG2 table memory at [mem 0x7b5c2000-0x7b5c2053] [ 0.008236] ACPI: Reserving MSDM table memory at [mem 0x7b5fd000-0x7b5fd054] [ 0.008237] ACPI: Reserving DMAR table memory at [mem 0x7b5c0000-0x7b5c00a7] [ 0.008238] ACPI: Reserving ASF! table memory at [mem 0x7b5bf000-0x7b5bf09f] [ 0.008239] ACPI: Reserving FPDT table memory at [mem 0x7b5be000-0x7b5be043] [ 0.008240] ACPI: Reserving UEFI table memory at [mem 0x7b544000-0x7b54413d] [ 0.008256] ACPI: Local APIC address 0xfee00000 [ 0.008421] No NUMA configuration found [ 0.008422] Faking a node at [mem 0x0000000000000000-0x000000047e7fffff] [ 0.008429] NODE_DATA(0) allocated [mem 0x47e7d6000-0x47e7fffff] [ 0.008631] Zone ranges: [ 0.008631] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008634] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008635] Normal [mem 0x0000000100000000-0x000000047e7fffff] [ 0.008636] Device empty [ 0.008637] Movable zone start for each node [ 0.008640] Early memory node ranges [ 0.008640] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.008642] node 0: [mem 0x0000000000100000-0x000000003fffffff] [ 0.008643] node 0: [mem 0x0000000040400000-0x000000006b7a2fff] [ 0.008644] node 0: [mem 0x0000000100000000-0x000000047e7fffff] [ 0.008646] Initmem setup node 0 [mem 0x0000000000001000-0x000000047e7fffff] [ 0.008647] On node 0 totalpages: 4102975 [ 0.008648] DMA zone: 64 pages used for memmap [ 0.008649] DMA zone: 21 pages reserved [ 0.008650] DMA zone: 3996 pages, LIFO batch:0 [ 0.008888] DMA zone: 28772 pages in unavailable ranges [ 0.008889] DMA32 zone: 6799 pages used for memmap [ 0.008890] DMA32 zone: 435107 pages, LIFO batch:63 [ 0.012244] DMA32 zone: 19549 pages in unavailable ranges [ 0.012245] Normal zone: 57248 pages used for memmap [ 0.012246] Normal zone: 3663872 pages, LIFO batch:63 [ 0.040110] Normal zone: 6144 pages in unavailable ranges [ 0.040127] Reserving Intel graphics memory at [mem 0x7d800000-0x7f7fffff] [ 0.040324] ACPI: PM-Timer IO Port: 0x1808 [ 0.040326] ACPI: Local APIC address 0xfee00000 [ 0.040331] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.040332] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.040333] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.040334] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.040334] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.040335] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.040336] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.040336] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.040369] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.040371] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.040373] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.040375] ACPI: IRQ0 used by override. [ 0.040376] ACPI: IRQ9 used by override. [ 0.040377] Using ACPI (MADT) for SMP configuration information [ 0.040378] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.040381] TSC deadline timer available [ 0.040382] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.040397] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.040399] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.040400] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.040401] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.040402] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff] [ 0.040403] PM: hibernation: Registered nosave memory: [mem 0x6b7a3000-0x70656fff] [ 0.040404] PM: hibernation: Registered nosave memory: [mem 0x70657000-0x70657fff] [ 0.040405] PM: hibernation: Registered nosave memory: [mem 0x70658000-0x7b537fff] [ 0.040406] PM: hibernation: Registered nosave memory: [mem 0x7b538000-0x7b599fff] [ 0.040406] PM: hibernation: Registered nosave memory: [mem 0x7b59a000-0x7b5fefff] [ 0.040407] PM: hibernation: Registered nosave memory: [mem 0x7b5ff000-0x7f7fffff] [ 0.040408] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0xefffffff] [ 0.040408] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.040409] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfcffffff] [ 0.040409] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.040410] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.040411] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.040412] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.040412] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.040413] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.040413] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.040414] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.040415] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.040415] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.040416] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.040417] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.040417] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.040419] [mem 0x7f800000-0xefffffff] available for PCI devices [ 0.040420] Booting paravirtualized kernel on bare hardware [ 0.040428] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.040443] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.040580] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 [ 0.040585] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 [ 0.040587] pcpu-alloc: [0] 0 1 2 3 [ 0.040609] Built 1 zonelists, mobility grouping on. Total pages: 4038843 [ 0.040610] Policy zone: Normal [ 0.040611] Kernel command line: BOOT_IMAGE=/vmlinuz-5.11.0-25-generic root=/dev/mapper/vgkubuntu-root ro quiet splash vt.handoff=7 [ 0.041513] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.041971] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.042018] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.081861] Memory: 15938192K/16411900K available (14345K kernel code, 3477K rwdata, 5456K rodata, 2684K init, 5980K bss, 473448K reserved, 0K cma-reserved) [ 0.081868] random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=0 [ 0.081964] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.081976] Kernel/User page tables isolation: enabled [ 0.081991] ftrace: allocating 48644 entries in 191 pages [ 0.095678] ftrace: allocated 191 pages with 7 groups [ 0.095759] rcu: Hierarchical RCU implementation. [ 0.095761] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.095762] Rude variant of Tasks RCU enabled. [ 0.095763] Tracing variant of Tasks RCU enabled. [ 0.095763] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.095764] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098569] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.099010] random: crng done (trusting CPU's manufacturer) [ 0.099026] vt handoff: transparent VT on vt#7 [ 0.099032] Console: colour dummy device 80x25 [ 0.099046] printk: console [tty0] enabled [ 0.099062] ACPI: Core revision 20201113 [ 0.099329] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.099408] APIC: Switch to symmetric I/O mode setup [ 0.099410] DMAR: Host address width 39 [ 0.099411] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.099415] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.099417] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.099420] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.099422] DMAR: RMRR base: 0x0000007aa9f000 end: 0x0000007aabefff [ 0.099423] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff [ 0.099425] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.099426] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.099427] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.101067] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.101069] x2apic enabled [ 0.101082] Switched APIC routing to cluster x2apic. [ 0.105122] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.123483] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns [ 0.123488] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=10799636) [ 0.123491] pid_max: default: 32768 minimum: 301 [ 0.123525] LSM: Security Framework initializing [ 0.123535] Yama: becoming mindful. [ 0.123557] AppArmor: AppArmor initialized [ 0.123609] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.123640] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.123866] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.123880] process: using mwait in idle threads [ 0.123881] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.123882] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.123885] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.123886] Spectre V2 : Mitigation: Full generic retpoline [ 0.123887] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.123888] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.123889] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.123889] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.123890] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.123892] TAA: Mitigation: Clear CPU buffers [ 0.123895] SRBDS: Mitigation: Microcode [ 0.123896] MDS: Mitigation: Clear CPU buffers [ 0.124117] Freeing SMP alternatives memory: 40K [ 0.127549] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1327 [ 0.127569] smpboot: CPU0: Intel(R) Core(TM) i5-7300U CPU @ 2.60GHz (family: 0x6, model: 0x8e, stepping: 0x9) [ 0.127714] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.127723] ... version: 4 [ 0.127724] ... bit width: 48 [ 0.127724] ... generic registers: 4 [ 0.127725] ... value mask: 0000ffffffffffff [ 0.127726] ... max period: 00007fffffffffff [ 0.127726] ... fixed-purpose events: 3 [ 0.127727] ... event mask: 000000070000000f [ 0.127803] rcu: Hierarchical SRCU implementation. [ 0.128312] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.128351] smp: Bringing up secondary CPUs ... [ 0.128418] x86: Booting SMP configuration: [ 0.128418] .... node #0, CPUs: #1 [ 0.130879] mce: [Hardware Error]: Machine check events logged [ 0.130882] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 3: cc40064000100151 [ 0.130886] mce: [Hardware Error]: TSC 0 ADDR 36d7f85e0 MISC 506485 [ 0.130889] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1629094306 SOCKET 0 APIC 2 microcode ea [ 0.130893] #2 [ 0.130893] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.130893] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.130893] #3 [ 0.131716] smp: Brought up 1 node, 4 CPUs [ 0.131716] smpboot: Max logical packages: 1 [ 0.131716] smpboot: Total of 4 processors activated (21599.27 BogoMIPS) [ 0.133241] devtmpfs: initialized [ 0.133241] x86/mm: Memory block size: 128MB [ 0.133241] PM: Registering ACPI NVS region [mem 0x70657000-0x70657fff] (4096 bytes) [ 0.133241] PM: Registering ACPI NVS region [mem 0x7b538000-0x7b599fff] (401408 bytes) [ 0.133241] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.133241] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.133241] pinctrl core: initialized pinctrl subsystem [ 0.133241] PM: RTC time: 06:11:46, date: 2021-08-16 [ 0.133241] NET: Registered protocol family 16 [ 0.133241] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.133241] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.133241] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.133241] audit: initializing netlink subsys (disabled) [ 0.133241] audit: type=2000 audit(1629094306.032:1): state=initialized audit_enabled=0 res=1 [ 0.133241] thermal_sys: Registered thermal governor 'fair_share' [ 0.133241] thermal_sys: Registered thermal governor 'bang_bang' [ 0.133241] thermal_sys: Registered thermal governor 'step_wise' [ 0.133241] thermal_sys: Registered thermal governor 'user_space' [ 0.133241] thermal_sys: Registered thermal governor 'power_allocator' [ 0.133241] EISA bus registered [ 0.133241] cpuidle: using governor ladder [ 0.133241] cpuidle: using governor menu [ 0.133241] Simple Boot Flag at 0x47 set to 0x1 [ 0.133241] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.133241] ACPI: bus type PCI registered [ 0.133241] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.133241] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.133241] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.133241] PCI: Using configuration type 1 for base access [ 0.135503] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.136353] Kprobes globally optimized [ 0.136356] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.136356] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.136356] ACPI: Added _OSI(Module Device) [ 0.136356] ACPI: Added _OSI(Processor Device) [ 0.136356] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.136356] ACPI: Added _OSI(Processor Aggregator Device) [ 0.136356] ACPI: Added _OSI(Linux-Dell-Video) [ 0.136356] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.136356] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.172854] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.173977] ACPI: EC: EC started [ 0.173978] ACPI: EC: interrupt blocked [ 0.175512] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.175513] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.176851] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.186488] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.187402] ACPI: Dynamic OEM Table Load: [ 0.187409] ACPI: SSDT 0xFFFF98EB40D85000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.188634] ACPI: Dynamic OEM Table Load: [ 0.188639] ACPI: SSDT 0xFFFF98EB4118E780 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.189773] ACPI: Dynamic OEM Table Load: [ 0.189779] ACPI: SSDT 0xFFFF98EB411C0000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.191174] ACPI: Dynamic OEM Table Load: [ 0.191180] ACPI: SSDT 0xFFFF98EB40D86400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.192402] ACPI: Dynamic OEM Table Load: [ 0.192407] ACPI: SSDT 0xFFFF98EB40D86800 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.194631] ACPI: Interpreter enabled [ 0.194670] ACPI: (supports S0 S3 S4 S5) [ 0.194671] ACPI: Using IOAPIC for interrupt routing [ 0.194703] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.195257] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.198472] ACPI: Power Resource [PUBS] (on) [ 0.198672] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.226795] ACPI: Power Resource [WRST] (on) [ 0.227192] ACPI: Power Resource [WRST] (on) [ 0.239782] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.239789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.239929] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability] [ 0.239994] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.239996] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.239997] acpi PNP0A08:00: _OSC: platform willing to grant [LTR] [ 0.239998] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.242125] PCI host bridge to bus 0000:00 [ 0.242128] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.242129] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.242131] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.242132] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.242133] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window] [ 0.242134] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.242153] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 [ 0.242860] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 [ 0.242868] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit] [ 0.242874] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x9fffffff 64bit pref] [ 0.242878] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f] [ 0.243665] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.243683] pci 0000:00:14.0: reg 0x10: [mem 0xdc120000-0xdc12ffff 64bit] [ 0.243744] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.244565] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.244583] pci 0000:00:14.2: reg 0x10: [mem 0xdc14a000-0xdc14afff 64bit] [ 0.245342] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.245356] pci 0000:00:16.0: reg 0x10: [mem 0xdc14b000-0xdc14bfff 64bit] [ 0.245421] pci 0000:00:16.0: PME# supported from D3hot [ 0.246189] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.246203] pci 0000:00:17.0: reg 0x10: [mem 0xdc148000-0xdc149fff] [ 0.246211] pci 0000:00:17.0: reg 0x14: [mem 0xdc14e000-0xdc14e0ff] [ 0.246217] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087] [ 0.246224] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b] [ 0.246231] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f] [ 0.246239] pci 0000:00:17.0: reg 0x24: [mem 0xdc14c000-0xdc14c7ff] [ 0.246277] pci 0000:00:17.0: PME# supported from D3hot [ 0.247041] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.247126] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.247918] pci 0000:00:1c.6: [8086:9d16] type 01 class 0x060400 [ 0.248009] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.248794] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.248880] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.249673] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.250524] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.250539] pci 0000:00:1f.2: reg 0x10: [mem 0xdc144000-0xdc147fff] [ 0.251346] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300 [ 0.251369] pci 0000:00:1f.3: reg 0x10: [mem 0xdc140000-0xdc143fff 64bit] [ 0.251401] pci 0000:00:1f.3: reg 0x20: [mem 0xdc130000-0xdc13ffff 64bit] [ 0.251456] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.252222] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.252281] pci 0000:00:1f.4: reg 0x10: [mem 0xdc14d000-0xdc14d0ff 64bit] [ 0.252352] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.253185] pci 0000:00:1f.6: [8086:15d7] type 00 class 0x020000 [ 0.253203] pci 0000:00:1f.6: reg 0x10: [mem 0xdc100000-0xdc11ffff] [ 0.253305] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.254092] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.254487] pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000 [ 0.254576] pci 0000:04:00.0: reg 0x10: [mem 0xdc000000-0xdc001fff 64bit] [ 0.254878] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.255579] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.255583] pci 0000:00:1c.6: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.255629] pci 0000:00:1d.0: PCI bridge to [bus 05-3d] [ 0.255633] pci 0000:00:1d.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.255637] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.257636] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.257706] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.257766] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.257834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.257888] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.257959] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258025] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258084] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258535] ACPI: EC: interrupt unblocked [ 0.258536] ACPI: EC: event unblocked [ 0.258548] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.258549] ACPI: EC: GPE=0x16 [ 0.258550] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete [ 0.258551] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events [ 0.259508] iommu: Default domain type: Translated [ 0.259612] SCSI subsystem initialized [ 0.259617] libata version 3.00 loaded. [ 0.259617] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.259617] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.259617] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.259617] vgaarb: loaded [ 0.259617] ACPI: bus type USB registered [ 0.259617] usbcore: registered new interface driver usbfs [ 0.259617] usbcore: registered new interface driver hub [ 0.259617] usbcore: registered new device driver usb [ 0.259617] pps_core: LinuxPPS API ver. 1 registered [ 0.259617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.259617] PTP clock support registered [ 0.259617] EDAC MC: Ver: 3.0.0 [ 0.259845] NetLabel: Initializing [ 0.259845] NetLabel: domain hash size = 128 [ 0.259845] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.259845] NetLabel: unlabeled traffic allowed by default [ 0.259845] PCI: Using ACPI for IRQ routing [ 0.261602] PCI: pci_cache_line_size set to 64 bytes [ 0.262222] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.262223] e820: reserve RAM buffer [mem 0x6b7a3000-0x6bffffff] [ 0.262224] e820: reserve RAM buffer [mem 0x47e800000-0x47fffffff] [ 0.264345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.264351] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.269542] clocksource: Switched to clocksource tsc-early [ 0.273435] VFS: Disk quotas dquot_6.6.0 [ 0.273435] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.273435] AppArmor: AppArmor Filesystem Enabled [ 0.273435] pnp: PnP ACPI init [ 0.273435] system 00:00: [mem 0x40000000-0x403fffff] has been reserved [ 0.273435] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273435] system 00:01: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.273435] system 00:01: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.273435] system 00:01: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.273435] system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.273435] system 00:01: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.273435] system 00:01: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.273435] system 00:01: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.273435] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.273435] system 00:02: [io 0xff00-0xfffe] has been reserved [ 0.273435] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.276169] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.276172] system 00:03: [io 0xffff] has been reserved [ 0.276174] system 00:03: [io 0xffff] has been reserved [ 0.276176] system 00:03: [io 0xffff] has been reserved [ 0.276178] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.276180] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.276185] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.276291] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.276337] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.276341] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.276365] pnp 00:06: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.276385] pnp 00:07: Plug and Play ACPI device, IDs LEN006e PNP0f13 (active) [ 0.276501] system 00:08: [io 0x1800-0x189f] could not be reserved [ 0.276503] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.276506] system 00:08: [io 0x0880-0x08ff] has been reserved [ 0.276508] system 00:08: [io 0x0900-0x097f] has been reserved [ 0.276510] system 00:08: [io 0x0980-0x09ff] has been reserved [ 0.276512] system 00:08: [io 0x0a00-0x0a7f] has been reserved [ 0.276514] system 00:08: [io 0x0a80-0x0aff] has been reserved [ 0.276516] system 00:08: [io 0x0b00-0x0b7f] has been reserved [ 0.276518] system 00:08: [io 0x0b80-0x0bff] has been reserved [ 0.276520] system 00:08: [io 0x15e0-0x15ef] has been reserved [ 0.276522] system 00:08: [io 0x1600-0x167f] could not be reserved [ 0.276524] system 00:08: [io 0x1640-0x165f] could not be reserved [ 0.276526] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.276528] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.276531] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.276533] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.276535] system 00:08: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.276537] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.276539] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.276542] system 00:08: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.276546] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278221] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.278224] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.278227] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.278231] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278815] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved [ 0.278817] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.278819] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.278820] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.278821] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.278822] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.278823] system 00:0a: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.278825] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.278826] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.278827] system 00:0a: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.278830] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.279159] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.279161] system 00:0b: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.279162] system 00:0b: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.279163] system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.279164] system 00:0b: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.279165] system 00:0b: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.279166] system 00:0b: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.279167] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.279168] system 00:0b: [mem 0x00100000-0x7f7fffff] could not be reserved [ 0.279170] system 00:0b: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.279171] system 00:0b: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.279174] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.279281] pnp: PnP ACPI: found 12 devices [ 0.284639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.284684] NET: Registered protocol family 2 [ 0.284793] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.286241] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.286327] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.286461] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.286513] TCP: Hash tables configured (established 131072 bind 65536) [ 0.286572] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.286617] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.286650] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.286701] NET: Registered protocol family 1 [ 0.286704] NET: Registered protocol family 44 [ 0.286711] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.286714] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.286716] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.286719] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000 [ 0.286726] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f800000-0x7f9fffff] [ 0.286742] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref] [ 0.286748] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.286750] pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.286752] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.286763] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.286767] pci 0000:00:1c.0: bridge window [mem 0x7f800000-0x7f9fffff] [ 0.286770] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref] [ 0.286774] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.286779] pci 0000:00:1c.6: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.286785] pci 0000:00:1d.0: PCI bridge to [bus 05-3d] [ 0.286787] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.286790] pci 0000:00:1d.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.286793] pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.286798] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.286799] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.286800] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.286801] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window] [ 0.286802] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.286803] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.286804] pci_bus 0000:02: resource 1 [mem 0x7f800000-0x7f9fffff] [ 0.286805] pci_bus 0000:02: resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref] [ 0.286807] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdc0fffff] [ 0.286808] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.286809] pci_bus 0000:05: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.286810] pci_bus 0000:05: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.286957] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.287573] PCI: CLS 0 bytes, default 64 [ 0.287620] Trying to unpack rootfs image as initramfs... [ 0.450615] Freeing initrd memory: 88828K [ 0.450713] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.450714] software IO TLB: mapped [mem 0x00000000677a3000-0x000000006b7a3000] (64MB) [ 0.450782] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:08 [mem 0xfed10000-0xfed13fff] [ 0.450785] caller snb_uncore_imc_init_box+0x7a/0xc0 mapping multiple BARs [ 0.450900] check: Scanning for low memory corruption every 60 seconds [ 0.451228] Initialise system trusted keyrings [ 0.451237] Key type blacklist registered [ 0.451261] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.452032] zbud: loaded [ 0.452211] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.452302] fuse: init (API version 7.33) [ 0.452417] integrity: Platform Keyring initialized [ 0.458982] Key type asymmetric registered [ 0.458983] Asymmetric key parser 'x509' registered [ 0.458990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.459010] io scheduler mq-deadline registered [ 0.459716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.459755] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.459756] vesafb: scrolling: redraw [ 0.459757] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.459775] vesafb: framebuffer at 0x80000000, mapped to 0x0000000040fbdb14, using 8128k, total 8128k [ 0.459801] fbcon: Deferring console take-over [ 0.459802] fb0: VESA VGA frame buffer device [ 0.459810] intel_idle: MWAIT substates: 0x11142120 [ 0.459812] intel_idle: v0.5.1 model 0x8E [ 0.459981] intel_idle: Local APIC timer is reliable in all C-states [ 0.460340] ACPI: AC Adapter [AC] (off-line) [ 0.460403] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.460427] ACPI: Sleep Button [SLPB] [ 0.460449] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.460463] ACPI: Lid Switch [LID] [ 0.460482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.460497] ACPI: Power Button [PWRF] [ 0.460557] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1327 [ 0.463828] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.463832] ACPI: Thermal Zone [THM0] (42 C) [ 0.463996] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.483008] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.486182] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.489137] Linux agpgart interface v0.103 [ 0.491759] loop: module loaded [ 0.492050] libphy: Fixed MDIO Bus: probed [ 0.492051] tun: Universal TUN/TAP device driver, 1.6 [ 0.492226] PPP generic driver version 2.4.2 [ 0.492420] VFIO - User Level meta-driver version: 0.3 [ 0.492498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.492512] ehci-pci: EHCI PCI platform driver [ 0.492521] ehci-platform: EHCI generic platform driver [ 0.492533] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.492535] ohci-pci: OHCI PCI platform driver [ 0.492546] ohci-platform: OHCI generic platform driver [ 0.492554] uhci_hcd: USB Universal Host Controller Interface driver [ 0.492609] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.495071] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.495078] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.495353] mousedev: PS/2 mouse device common for all mice [ 0.495706] rtc_cmos 00:04: RTC can wake from S4 [ 0.496627] rtc_cmos 00:04: registered as rtc0 [ 0.496878] rtc_cmos 00:04: setting system clock to 2021-08-16T06:11:46 UTC (1629094306) [ 0.496922] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.496935] i2c /dev entries driver [ 0.496970] device-mapper: uevent: version 1.0.3 [ 0.497003] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 0.497023] platform eisa.0: Probing EISA bus 0 [ 0.497025] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.497026] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.497027] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.497028] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.497029] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.497030] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.497031] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.497032] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.497033] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.497034] platform eisa.0: EISA: Detected 0 cards [ 0.497037] intel_pstate: Intel P-state driver initializing [ 0.497399] intel_pstate: HWP enabled [ 0.497434] ledtrig-cpu: registered to indicate activity on CPUs [ 0.497526] intel_pmc_core intel_pmc_core.0: initialized [ 0.497553] drop_monitor: Initializing network drop monitor service [ 0.497660] NET: Registered protocol family 10 [ 0.497908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.505240] battery: ACPI: Battery Slot [BAT1] (battery present) [ 0.506815] mce: [Hardware Error]: Machine check events logged [ 0.506816] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 3: 8c40004000100151 [ 0.506820] mce: [Hardware Error]: TSC 7998fb51f ADDR 3f070c6c0 MISC 2586485 [ 0.506823] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1629094306 SOCKET 0 APIC 2 microcode ea [ 0.506831] mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 3: 8c40004000100151 [ 0.506832] mce: [Hardware Error]: TSC 799908991 ADDR 3f070c6c0 MISC 516485 [ 0.506835] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1629094306 SOCKET 0 APIC 2 microcode ea [ 0.507941] Segment Routing with IPv6 [ 0.507961] NET: Registered protocol family 17 [ 0.508000] Key type dns_resolver registered [ 0.508244] microcode: sig=0x806e9, pf=0x80, revision=0xea [ 0.508354] microcode: Microcode Update Driver: v2.2. [ 0.508358] IPI shorthand broadcast: enabled [ 0.508366] sched_clock: Marking stable (507716699, 635304)->(511126519, -2774516) [ 0.508479] registered taskstats version 1 [ 0.508489] Loading compiled-in X.509 certificates [ 0.508979] Loaded X.509 cert 'Build time autogenerated kernel key: 6e06263e1d9051336d8957ecd5ecd746c1f8aac1' [ 0.509417] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.509854] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.509938] zswap: loaded using pool lzo/zbud [ 0.510010] Key type ._fscrypt registered [ 0.510011] Key type .fscrypt registered [ 0.510011] Key type fscrypt-provisioning registered [ 0.512313] Key type encrypted registered [ 0.512317] AppArmor: AppArmor sha1 policy hashing enabled [ 0.512322] ima: No TPM chip found, activating TPM-bypass! [ 0.512332] ima: Allocated hash algorithm: sha1 [ 0.512337] ima: No architecture policies found [ 0.512346] evm: Initialising EVM extended attributes: [ 0.512347] evm: security.selinux [ 0.512347] evm: security.SMACK64 [ 0.512348] evm: security.SMACK64EXEC [ 0.512348] evm: security.SMACK64TRANSMUTE [ 0.512349] evm: security.SMACK64MMAP [ 0.512349] evm: security.apparmor [ 0.512350] evm: security.ima [ 0.512350] evm: security.capability [ 0.512351] evm: HMAC attrs: 0x1 [ 0.513270] PM: Magic number: 1:465:165 [ 0.513458] RAS: Correctable Errors collector initialized. [ 0.514194] Freeing unused decrypted memory: 2036K [ 0.514493] Freeing unused kernel image (initmem) memory: 2684K [ 0.551870] Write protecting the kernel read-only data: 22528k [ 0.552375] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.552529] Freeing unused kernel image (rodata/data gap) memory: 688K [ 0.604465] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.604466] x86/mm: Checking user space page tables [ 0.646712] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.646719] Run /init as init process [ 0.646720] with arguments: [ 0.646721] /init [ 0.646722] splash [ 0.646723] with environment: [ 0.646723] HOME=/ [ 0.646724] TERM=linux [ 0.646725] BOOT_IMAGE=/vmlinuz-5.11.0-25-generic [ 0.737558] ahci 0000:00:17.0: version 3.0 [ 0.737840] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode [ 0.737844] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.738545] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 0.739131] e1000e: Intel(R) PRO/1000 Network Driver [ 0.739133] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.739788] scsi host0: ahci [ 0.740298] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 0.740357] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.742929] scsi host1: ahci [ 0.743071] scsi host2: ahci [ 0.743122] ata1: DUMMY [ 0.743124] ata2: DUMMY [ 0.743127] ata3: SATA max UDMA/133 abar m2048@0xdc14c000 port 0xdc14c200 irq 125 [ 0.760244] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.760304] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.762300] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.762309] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.763389] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.766095] cryptd: max_cpu_qlen set to 1000 [ 0.766363] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 0.766822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [ 0.766826] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.766828] usb usb1: Product: xHCI Host Controller [ 0.766830] usb usb1: Manufacturer: Linux 5.11.0-25-generic xhci-hcd [ 0.766831] usb usb1: SerialNumber: 0000:00:14.0 [ 0.767274] hub 1-0:1.0: USB hub found [ 0.767301] hub 1-0:1.0: 12 ports detected [ 0.767885] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.768864] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.771929] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.771936] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.771940] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.771995] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [ 0.771999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.772001] usb usb2: Product: xHCI Host Controller [ 0.772003] usb usb2: Manufacturer: Linux 5.11.0-25-generic xhci-hcd [ 0.772005] usb usb2: SerialNumber: 0000:00:14.0 [ 0.778291] AVX2 version of gcm_enc/dec engaged. [ 0.778294] AES CTR mode by8 optimization enabled [ 0.778388] hub 2-0:1.0: USB hub found [ 0.778407] hub 2-0:1.0: 6 ports detected [ 0.779634] usb: port power management may be unreliable [ 0.786256] mce: CMCI storm detected: switching to poll mode [ 0.844746] checking generic (80000000 7f0000) vs hw (db000000 1000000) [ 0.844750] checking generic (80000000 7f0000) vs hw (80000000 20000000) [ 0.844752] fb0: switching to inteldrmfb from VESA VGA [ 0.844898] i915 0000:00:02.0: vgaarb: deactivate vga console [ 0.859596] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.860885] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 0.896015] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details. [ 0.909812] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 0.921167] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.926120] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 0.941773] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.019945] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:ed:2f:05 [ 1.019954] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.020031] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF [ 1.021935] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.059713] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.060602] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.060614] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.060622] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.060742] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.061114] ata3.00: supports DRM functions and may not be fully accessible [ 1.061589] ata3.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT04B6Q, max UDMA/133 [ 1.061594] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.063899] fbcon: i915drmfb (fb0) is primary device [ 1.063904] fbcon: Deferring console take-over [ 1.063909] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 1.064303] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.064315] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.064322] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.064444] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1.064820] ata3.00: supports DRM functions and may not be fully accessible [ 1.067039] ata3.00: configured for UDMA/133 [ 1.080427] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 860 4B6Q PQ: 0 ANSI: 5 [ 1.080914] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.080931] ata3.00: Enabling discard_zeroes_data [ 1.081114] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.081145] sd 2:0:0:0: [sda] Write Protect is off [ 1.081153] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.081210] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.104702] sda: sda1 sda2 < sda5 sda6 > [ 1.105735] ata3.00: Enabling discard_zeroes_data [ 1.107364] sd 2:0:0:0: [sda] supports TCG Opal [ 1.107372] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.115691] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.147427] usb 2-3: New USB device found, idVendor=0bda, idProduct=0316, bcdDevice= 2.04 [ 1.147440] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.147445] usb 2-3: Product: USB3.0-CRW [ 1.147450] usb 2-3: Manufacturer: Generic [ 1.147454] usb 2-3: SerialNumber: 20120501030900000 [ 1.168903] usb-storage 2-3:1.0: USB Mass Storage device detected [ 1.169207] scsi host3: usb-storage 2-3:1.0 [ 1.169429] usbcore: registered new interface driver usb-storage [ 1.172453] usbcore: registered new interface driver uas [ 1.475728] tsc: Refined TSC clocksource calibration: 2711.979 MHz [ 1.475743] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27177269164, max_idle_ns: 440795212223 ns [ 1.475811] clocksource: Switched to clocksource tsc [ 1.590306] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [ 1.623755] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [ 1.623775] psmouse serio1: synaptics: Your touchpad (PNP: LEN006e PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 1.689687] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf002a3/0x940300/0x12e800/0x400000, board id: 3276, fw id: 2491725 [ 1.689715] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.731778] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.181951] scsi 3:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [ 2.182456] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.205752] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 2.388475] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 2.597278] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 24.359125] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 24.610018] systemd[1]: Inserted module 'autofs4' [ 24.644245] systemd[1]: systemd 245.4-4ubuntu3.11 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 24.663988] systemd[1]: Detected architecture x86-64. [ 24.697873] systemd[1]: Set hostname to . [ 24.813516] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 24.860368] systemd[1]: Created slice system-modprobe.slice. [ 24.860534] systemd[1]: Created slice Cryptsetup Units Slice. [ 24.860680] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 24.860836] systemd[1]: Created slice User and Session Slice. [ 24.860884] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 24.861021] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 24.861067] systemd[1]: Reached target User and Group Name Lookups. [ 24.861078] systemd[1]: Reached target Remote File Systems. [ 24.861087] systemd[1]: Reached target Slices. [ 24.861153] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 24.861223] systemd[1]: Listening on LVM2 poll daemon socket. [ 24.861279] systemd[1]: Listening on Syslog Socket. [ 24.861342] systemd[1]: Listening on fsck to fsckd communication Socket. [ 24.861375] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 24.861504] systemd[1]: Listening on Journal Audit Socket. [ 24.861570] systemd[1]: Listening on Journal Socket (/dev/log). [ 24.861644] systemd[1]: Listening on Journal Socket. [ 24.861714] systemd[1]: Listening on udev Control Socket. [ 24.861768] systemd[1]: Listening on udev Kernel Socket. [ 24.862384] systemd[1]: Mounting Huge Pages File System... [ 24.863062] systemd[1]: Mounting POSIX Message Queue File System... [ 24.863871] systemd[1]: Mounting Kernel Debug File System... [ 24.864841] systemd[1]: Mounting Kernel Trace File System... [ 24.866174] systemd[1]: Starting Journal Service... [ 24.867185] systemd[1]: Starting Availability of block devices... [ 24.868468] systemd[1]: Starting Set the console keyboard layout... [ 24.869485] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 24.870433] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 24.870468] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 24.871252] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 24.871293] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 24.872794] systemd[1]: Starting Load Kernel Modules... [ 24.873766] systemd[1]: Starting Remount Root and Kernel File Systems... [ 24.874772] systemd[1]: Starting udev Coldplug all Devices... [ 24.875869] systemd[1]: Starting Uncomplicated firewall... [ 24.877443] systemd[1]: Mounted Huge Pages File System. [ 24.878684] systemd[1]: Mounted POSIX Message Queue File System. [ 24.878863] systemd[1]: Mounted Kernel Debug File System. [ 24.879009] systemd[1]: Mounted Kernel Trace File System. [ 24.879712] systemd[1]: Finished Availability of block devices. [ 24.880272] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 24.883125] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 24.886387] systemd[1]: Finished Remount Root and Kernel File Systems. [ 24.887305] systemd[1]: Finished Uncomplicated firewall. [ 24.890067] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 24.890105] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 24.890865] systemd[1]: Starting Load/Save Random Seed... [ 24.891954] systemd[1]: Starting Create System Users... [ 24.904263] lp: driver loaded but no devices found [ 24.909080] ppdev: user-space parallel port driver [ 24.910331] systemd[1]: Finished Load/Save Random Seed. [ 24.921273] systemd[1]: Finished Create System Users. [ 24.922325] systemd[1]: Starting Create Static Device Nodes in /dev... [ 24.927949] systemd[1]: Finished Load Kernel Modules. [ 24.930167] systemd[1]: Mounting FUSE Control File System... [ 24.931318] systemd[1]: Mounting Kernel Configuration File System... [ 24.932602] systemd[1]: Starting Apply Kernel Variables... [ 24.933669] systemd[1]: Mounted FUSE Control File System. [ 24.936177] systemd[1]: Finished Create Static Device Nodes in /dev. [ 24.937925] systemd[1]: Starting udev Kernel Device Manager... [ 24.939817] systemd[1]: Mounted Kernel Configuration File System. [ 24.959283] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 24.959838] systemd[1]: Finished Apply Kernel Variables. [ 24.968883] systemd[1]: Started Journal Service. [ 24.975227] systemd-journald[502]: Received client request to flush runtime journal. [ 24.982418] systemd-journald[502]: File /var/log/journal/d8fdbc591faa4fa3947930cbc3117a95/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 25.237972] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 25.284881] Non-volatile memory driver v1.3 [ 25.285289] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 25.285354] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.285629] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 25.291933] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.333423] Intel(R) Wireless WiFi driver for Linux [ 25.349376] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 25.349380] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 25.349381] thinkpad_acpi: ThinkPad BIOS N1QET90W (1.65 ), EC N1QHT53W [ 25.349383] thinkpad_acpi: Lenovo ThinkPad T470, model 20HES0FW00 [ 25.364671] thinkpad_acpi: radio switch found; radios are enabled [ 25.364692] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 25.364693] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 25.369544] iwlwifi 0000:04:00.0: Found debug destination: EXTERNAL_DRAM [ 25.369548] iwlwifi 0000:04:00.0: Found debug configuration: 0 [ 25.370054] iwlwifi 0000:04:00.0: loaded firmware version 36.77d01142.0 8265-36.ucode op_mode iwlmvm [ 25.399353] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 25.399356] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 25.399357] RAPL PMU: hw unit of domain package 2^-14 Joules [ 25.399357] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 25.399358] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 25.399359] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 25.446972] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 25.456175] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 25.456832] iwlwifi 0000:04:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 25.465488] thinkpad_acpi: battery 2 registered (start 85, stop 90) [ 25.500589] thinkpad_acpi: battery 1 registered (start 85, stop 90) [ 25.500599] battery: new extension: ThinkPad Battery Extension [ 25.503361] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 25.518038] iwlwifi 0000:04:00.0: base HW address: 00:28:f8:52:c9:52 [ 25.581664] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 25.593953] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 25.594269] thermal thermal_zone3: failed to read out thermal zone (-61) [ 25.653844] audit: type=1400 audit(1629094331.654:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=651 comm="apparmor_parser" [ 25.688693] audit: type=1400 audit(1629094331.686:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=648 comm="apparmor_parser" [ 25.688699] audit: type=1400 audit(1629094331.686:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=648 comm="apparmor_parser" [ 25.688701] audit: type=1400 audit(1629094331.686:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=648 comm="apparmor_parser" [ 25.691207] audit: type=1400 audit(1629094331.686:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=649 comm="apparmor_parser" [ 25.694101] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 25.705527] audit: type=1400 audit(1629094331.702:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=654 comm="apparmor_parser" [ 25.705534] audit: type=1400 audit(1629094331.702:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=654 comm="apparmor_parser" [ 25.705536] audit: type=1400 audit(1629094331.702:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=654 comm="apparmor_parser" [ 25.705539] audit: type=1400 audit(1629094331.702:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=654 comm="apparmor_parser" [ 25.708283] audit: type=1400 audit(1629094331.706:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=655 comm="apparmor_parser" [ 25.748809] intel_rapl_common: Found RAPL domain package [ 25.748812] intel_rapl_common: Found RAPL domain core [ 25.748813] intel_rapl_common: Found RAPL domain uncore [ 25.748814] intel_rapl_common: Found RAPL domain dram [ 25.748816] intel_rapl_common: Found RAPL domain psys [ 25.757570] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 25.758418] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 25.841354] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 25.841360] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 25.841364] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x17/0x21/0x0/0x0/0x0) [ 25.841367] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 25.841369] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 25.841371] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 25.841373] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 25.841375] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 25.917121] Adding 999420k swap on /dev/mapper/vgkubuntu-swap_1. Priority:-2 extents:1 across:999420k SSFS [ 25.936710] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 25.937041] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 25.937126] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 25.939911] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 25.939968] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 25.940015] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 25.940061] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 25.940103] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 25.940149] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 26.797948] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 26.931370] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 26.999215] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [ 28.404299] systemd-journald[502]: File /var/log/journal/d8fdbc591faa4fa3947930cbc3117a95/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 30.661873] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 30.670933] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 30.688054] wlp4s0: authenticated [ 30.688260] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [ 30.688264] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [ 30.691621] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [ 30.701491] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=28) [ 30.710133] wlp4s0: associated [ 40.711928] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 41.478682] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 41.488108] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 41.595544] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 41.702254] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 41.803812] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 42.967871] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 43.121204] usb 1-2: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.00 [ 43.121221] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 43.121229] usb 1-2: Product: Cruzer Force [ 43.121234] usb 1-2: Manufacturer: SanDisk [ 43.121239] usb 1-2: SerialNumber: 4C530001011112114034 [ 43.122674] usb-storage 1-2:1.0: USB Mass Storage device detected [ 43.125415] scsi host4: usb-storage 1-2:1.0 [ 43.478038] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 43.487861] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 43.595589] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 43.701560] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 43.803549] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 44.132641] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6 [ 44.133636] sd 4:0:0:0: [sdc] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 44.133740] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 44.135116] sd 4:0:0:0: [sdc] Write Protect is off [ 44.135128] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 44.135485] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 44.161507] sdc: sdc1 [ 44.167736] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 53.408497] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 53.419546] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 53.523545] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 53.630174] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 53.735873] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 56.600531] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 56.608597] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 56.719690] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 56.830066] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 56.931516] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 64.261701] usb 1-2: USB disconnect, device number 2 [ 69.527740] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 69.536571] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 69.647868] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 69.758231] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 69.879870] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 73.473628] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [ 73.977645] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 75.137553] PM: suspend entry (deep) [ 75.141668] Filesystems sync: 0.004 seconds [ 75.142367] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 75.143560] OOM killer disabled. [ 75.143561] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 75.144866] printk: Suspending console(s) (use no_console_suspend to debug) [ 75.387860] psmouse serio2: Failed to disable mouse on synaptics-pt/serio0 [ 75.535916] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 75.537254] sd 2:0:0:0: [sda] Stopping disk [ 75.561703] e1000e: EEE TX LPI TIMER: 00000011 [ 75.907831] mce_notify_irq: 23 callbacks suppressed [ 75.907837] mce: [Hardware Error]: Machine check events logged [ 76.480386] ACPI: EC: interrupt blocked [ 76.536276] ACPI: Preparing to enter system sleep state S3 [ 76.543738] ACPI: EC: event blocked [ 76.543741] ACPI: EC: EC stopped [ 76.543742] PM: Saving platform NVS memory [ 76.543751] Disabling non-boot CPUs ... [ 76.544344] IRQ 128: no longer affine to CPU1 [ 76.545361] smpboot: CPU 1 is now offline [ 76.548716] smpboot: CPU 2 is now offline [ 76.550214] IRQ 16: no longer affine to CPU3 [ 76.550224] IRQ 127: no longer affine to CPU3 [ 76.550232] IRQ 130: no longer affine to CPU3 [ 76.551257] smpboot: CPU 3 is now offline [ 76.555812] ACPI: Low-level resume complete [ 76.556057] ACPI: EC: EC started [ 76.556062] PM: Restoring platform NVS memory [ 76.567780] Enabling non-boot CPUs ... [ 76.567971] x86: Booting SMP configuration: [ 76.567976] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 76.582009] CPU1 is up [ 76.582135] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 76.586390] CPU2 is up [ 76.586512] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 76.589996] CPU3 is up [ 76.596665] ACPI: Waking up from system sleep state S3 [ 76.699245] ACPI: EC: interrupt unblocked [ 76.741829] ACPI: EC: event unblocked [ 76.747109] sd 2:0:0:0: [sda] Starting disk [ 76.772062] usb 2-3: Disable of device-initiated U1 failed. [ 76.775885] usb 2-3: Disable of device-initiated U2 failed. [ 76.972674] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 77.059890] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 77.061491] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 77.061521] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 77.061538] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 77.061733] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 77.062187] ata3.00: supports DRM functions and may not be fully accessible [ 77.067020] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 77.067051] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 77.067069] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 77.067259] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 77.067718] ata3.00: supports DRM functions and may not be fully accessible [ 77.070771] ata3.00: configured for UDMA/133 [ 77.081826] ata3.00: Enabling discard_zeroes_data [ 77.483580] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [ 77.516420] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [ 77.651121] acpi LNXPOWER:02: Turning OFF [ 77.651399] acpi LNXPOWER:01: Turning OFF [ 77.652320] OOM killer enabled. [ 77.652330] Restarting tasks ... done. [ 77.682436] thermal thermal_zone3: failed to read out thermal zone (-61) [ 77.760843] PM: suspend exit [ 77.761893] mce: [Hardware Error]: Machine check events logged [ 78.634852] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 78.930461] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 79.066922] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 79.136661] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [ 82.718220] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 82.728193] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 82.735568] wlp4s0: authenticated [ 82.737607] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [ 82.737620] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [ 82.739988] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [ 82.742662] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=21) [ 82.746873] wlp4s0: associated [ 92.749125] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 93.497615] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 93.506557] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 93.616263] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 93.722632] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 93.824279] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 95.479070] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 95.486970] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 95.592286] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 95.698632] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 95.800288] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 106.826580] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 106.836560] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 106.944258] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 107.050115] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 107.151972] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 120.692490] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [ 120.703121] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [ 120.808035] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [ 120.918458] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [ 121.020271] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [ 133.530437] wlp4s0: authenticate with 92:63:99:9c:76:23 [ 133.538279] wlp4s0: send auth to 92:63:99:9c:76:23 (try 1/3) [ 133.553805] wlp4s0: authenticated [ 133.556645] wlp4s0: associate with 92:63:99:9c:76:23 (try 1/3) [ 133.577744] wlp4s0: RX AssocResp from 92:63:99:9c:76:23 (capab=0x431 status=0 aid=1) [ 133.579218] wlp4s0: associated [ 133.641937] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 340.799921] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [ 341.304020] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 341.338166] wlp4s0: deauthenticating from 92:63:99:9c:76:23 by local choice (Reason: 3=DEAUTH_LEAVING) [ 342.500416] PM: suspend entry (deep) [ 342.505846] Filesystems sync: 0.005 seconds [ 342.507159] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 342.509058] OOM killer disabled. [ 342.509060] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 342.510336] printk: Suspending console(s) (use no_console_suspend to debug) [ 342.673630] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 342.674888] sd 2:0:0:0: [sda] Stopping disk [ 342.705215] e1000e: EEE TX LPI TIMER: 00000011 [ 344.253991] ACPI: EC: interrupt blocked [ 344.310105] ACPI: Preparing to enter system sleep state S3 [ 344.318186] ACPI: EC: event blocked [ 344.318189] ACPI: EC: EC stopped [ 344.318190] PM: Saving platform NVS memory [ 344.318200] Disabling non-boot CPUs ... [ 344.318848] IRQ 128: no longer affine to CPU1 [ 344.319870] smpboot: CPU 1 is now offline [ 344.323399] smpboot: CPU 2 is now offline [ 344.324894] IRQ 127: no longer affine to CPU3 [ 344.324909] IRQ 130: no longer affine to CPU3 [ 344.325945] smpboot: CPU 3 is now offline [ 344.330571] ACPI: Low-level resume complete [ 344.330817] ACPI: EC: EC started [ 344.330821] PM: Restoring platform NVS memory [ 344.342383] Enabling non-boot CPUs ... [ 344.342541] x86: Booting SMP configuration: [ 344.342545] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 344.356621] CPU1 is up [ 344.356749] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 344.360977] CPU2 is up [ 344.361104] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 344.364670] CPU3 is up [ 344.371343] ACPI: Waking up from system sleep state S3 [ 344.462395] ACPI: EC: interrupt unblocked [ 344.507528] ACPI: EC: event unblocked [ 344.508967] sd 2:0:0:0: [sda] Starting disk [ 344.664724] usb 2-3: Disable of device-initiated U1 failed. [ 344.668216] usb 2-3: Disable of device-initiated U2 failed. [ 344.821586] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 344.823175] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 344.823207] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 344.823224] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 344.823436] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 344.823906] ata3.00: supports DRM functions and may not be fully accessible [ 344.828719] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 344.828750] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 344.828768] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 344.828958] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 344.829456] ata3.00: supports DRM functions and may not be fully accessible [ 344.832526] ata3.00: configured for UDMA/133 [ 344.843563] ata3.00: Enabling discard_zeroes_data [ 344.862545] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 345.248219] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [ 345.281242] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [ 345.413993] acpi LNXPOWER:02: Turning OFF [ 345.414269] acpi LNXPOWER:01: Turning OFF [ 345.415099] OOM killer enabled. [ 345.415106] Restarting tasks ... done. [ 345.431694] thermal thermal_zone3: failed to read out thermal zone (-61) [ 345.518870] PM: suspend exit [ 346.394683] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 346.675474] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 346.810386] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 346.879142] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [ 350.509900] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [ 350.519545] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [ 350.535421] wlp4s0: authenticated [ 350.537606] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [ 350.657883] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 2/3) [ 350.728415] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [ 350.733355] wlp4s0: associated [ 351.890455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 451.739152] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [ 653.274697] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 3663.920862] i915 0000:00:02.0: [drm] Resetting vcs0 for preemption time out [ 3663.920878] i915 0000:00:02.0: [drm] mpv[5001] context reset due to GPU hang [ 3663.923201] i915 0000:00:02.0: [drm] GPU HANG: ecode 9:4:a8fffffd, in mpv [5001] [ 3694.141223] fbcon: Taking over console [ 3694.144072] Console: switching to colour frame buffer device 240x67 [ 3746.199057] show_signal: 35 callbacks suppressed [ 3746.199061] traps: xss-lock[1283] trap int3 ip:7f4a6312c295 sp:7ffc97c1abc0 error:0 in libglib-2.0.so.0.6400.6[7f4a630f0000+84000] [ 4854.141294] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [ 5755.161059] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 7554.025655] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [ 7854.071350] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 8454.021037] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [ 8754.053594] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [ 8755.077521] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 1 (2462.000/0 MHz) [ 8756.306588] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2462.000 MHz, width 2 (2452.000/0 MHz) [12203.196113] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [12203.211457] wlp4s0: deauthenticating from 24:65:11:a6:d5:e3 by local choice (Reason: 3=DEAUTH_LEAVING) [12203.412137] PM: suspend entry (deep) [12203.424034] Filesystems sync: 0.011 seconds [12203.424830] Freezing user space processes ... (elapsed 0.008 seconds) done. [12203.432902] OOM killer disabled. [12203.432904] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12203.434246] printk: Suspending console(s) (use no_console_suspend to debug) [12203.605421] sd 2:0:0:0: [sda] Synchronizing SCSI cache [12203.606781] sd 2:0:0:0: [sda] Stopping disk [12203.636570] e1000e: EEE TX LPI TIMER: 00000011 [12204.009937] ACPI: EC: interrupt blocked [12204.065960] ACPI: Preparing to enter system sleep state S3 [12204.073522] ACPI: EC: event blocked [12204.073525] ACPI: EC: EC stopped [12204.073526] PM: Saving platform NVS memory [12204.073535] Disabling non-boot CPUs ... [12204.074130] IRQ 128: no longer affine to CPU1 [12204.075156] smpboot: CPU 1 is now offline [12204.078572] smpboot: CPU 2 is now offline [12204.080124] IRQ 130: no longer affine to CPU3 [12204.081155] smpboot: CPU 3 is now offline [12204.085754] ACPI: Low-level resume complete [12204.086000] ACPI: EC: EC started [12204.086003] PM: Restoring platform NVS memory [12204.097644] Enabling non-boot CPUs ... [12204.098049] x86: Booting SMP configuration: [12204.098054] smpboot: Booting Node 0 Processor 1 APIC 0x2 [12204.112100] CPU1 is up [12204.112226] smpboot: Booting Node 0 Processor 2 APIC 0x1 [12204.116474] CPU2 is up [12204.116597] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12204.120135] CPU3 is up [12204.126642] ACPI: Waking up from system sleep state S3 [12204.220348] ACPI: EC: interrupt unblocked [12204.267498] ACPI: EC: event unblocked [12204.270516] sd 2:0:0:0: [sda] Starting disk [12204.424805] usb 2-3: Disable of device-initiated U1 failed. [12204.428328] usb 2-3: Disable of device-initiated U2 failed. [12204.589120] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12204.590792] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [12204.590820] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12204.590837] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [12204.591012] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [12204.591448] ata3.00: supports DRM functions and may not be fully accessible [12204.595745] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [12204.595775] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [12204.595792] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [12204.595883] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [12204.596215] ata3.00: supports DRM functions and may not be fully accessible [12204.598742] ata3.00: configured for UDMA/133 [12204.609787] ata3.00: Enabling discard_zeroes_data [12204.622169] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [12204.996481] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [12205.029432] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [12205.164126] acpi LNXPOWER:02: Turning OFF [12205.164402] acpi LNXPOWER:01: Turning OFF [12205.165378] OOM killer enabled. [12205.165387] Restarting tasks ... done. [12205.204826] thermal thermal_zone3: failed to read out thermal zone (-61) [12205.275683] PM: suspend exit [12206.161238] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [12206.704153] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [12206.840658] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [12206.910572] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [12210.609746] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [12210.618732] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [12210.789668] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 2/3) [12210.856309] wlp4s0: authenticated [12210.857648] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [12210.901297] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [12210.907246] wlp4s0: associated [12211.058082] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [12511.900192] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [15128.945055] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [15130.890639] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [16354.876877] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [16355.383710] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [16355.411401] wlp4s0: deauthenticating from 24:65:11:a6:d5:e3 by local choice (Reason: 3=DEAUTH_LEAVING) [16356.858925] PM: suspend entry (deep) [16356.863842] Filesystems sync: 0.004 seconds [16356.864452] Freezing user space processes ... (elapsed 0.001 seconds) done. [16356.866054] OOM killer disabled. [16356.866055] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16356.867280] printk: Suspending console(s) (use no_console_suspend to debug) [16357.109261] psmouse serio2: Failed to disable mouse on synaptics-pt/serio0 [16357.225309] sd 2:0:0:0: [sda] Synchronizing SCSI cache [16357.228798] sd 2:0:0:0: [sda] Stopping disk [16357.255272] e1000e: EEE TX LPI TIMER: 00000011 [16357.613666] ACPI: EC: interrupt blocked [16357.673523] ACPI: Preparing to enter system sleep state S3 [16357.680344] ACPI: EC: event blocked [16357.680346] ACPI: EC: EC stopped [16357.680347] PM: Saving platform NVS memory [16357.680355] Disabling non-boot CPUs ... [16357.680881] IRQ 128: no longer affine to CPU1 [16357.681900] smpboot: CPU 1 is now offline [16357.684390] smpboot: CPU 2 is now offline [16357.686153] IRQ 130: no longer affine to CPU3 [16357.687165] smpboot: CPU 3 is now offline [16357.690212] ACPI: Low-level resume complete [16357.690311] ACPI: EC: EC started [16357.690311] PM: Restoring platform NVS memory [16357.692226] Enabling non-boot CPUs ... [16357.692263] x86: Booting SMP configuration: [16357.692264] smpboot: Booting Node 0 Processor 1 APIC 0x2 [16357.694064] CPU1 is up [16357.694087] smpboot: Booting Node 0 Processor 2 APIC 0x1 [16357.694708] CPU2 is up [16357.694732] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16357.695277] CPU3 is up [16357.696555] ACPI: Waking up from system sleep state S3 [16357.719164] ACPI: EC: interrupt unblocked [16357.757888] ACPI: EC: event unblocked [16357.759059] sd 2:0:0:0: [sda] Starting disk [16357.890586] usb 2-3: Disable of device-initiated U1 failed. [16357.894086] usb 2-3: Disable of device-initiated U2 failed. [16358.074604] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [16358.075120] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [16358.075123] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [16358.075125] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [16358.075226] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [16358.075542] ata3.00: supports DRM functions and may not be fully accessible [16358.078694] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [16358.078698] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [16358.078700] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [16358.078789] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [16358.079142] ata3.00: supports DRM functions and may not be fully accessible [16358.081638] ata3.00: configured for UDMA/133 [16358.088031] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [16358.108287] ata3.00: Enabling discard_zeroes_data [16358.491171] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [16358.524883] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [16358.642608] acpi LNXPOWER:02: Turning OFF [16358.642641] acpi LNXPOWER:01: Turning OFF [16358.642984] OOM killer enabled. [16358.642985] Restarting tasks ... done. [16358.645437] thermal thermal_zone3: failed to read out thermal zone (-61) [16358.697572] PM: suspend exit [16358.779663] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [16359.039137] usb 2-1: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.41 [16359.039151] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [16359.039194] usb 2-1: Product: Lenovo ThinkPad Dock [16359.039199] usb 2-1: Manufacturer: LENOVO [16359.046881] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [16359.050593] hub 2-1:1.0: USB hub found [16359.050703] hub 2-1:1.0: 4 ports detected [16359.159567] usb 1-1: new high-speed USB device number 3 using xhci_hcd [16359.180909] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [16359.249599] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [16359.311049] usb 1-1: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.40 [16359.311055] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [16359.311057] usb 1-1: Product: Lenovo ThinkPad Dock [16359.311059] usb 1-1: Manufacturer: LENOVO [16359.312052] hub 1-1:1.0: USB hub found [16359.312383] hub 1-1:1.0: 4 ports detected [16359.659707] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd [16359.820726] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [16359.820741] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [16359.820746] usb 1-1.1: Product: USB Optical Mouse [16359.820751] usb 1-1.1: Manufacturer: Logitech [16359.850506] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [16359.915542] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd [16360.027926] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [16360.027941] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [16360.029113] hub 1-1.2:1.0: USB hub found [16360.029165] hub 1-1.2:1.0: 3 ports detected [16360.123645] usb 1-1.4: new high-speed USB device number 6 using xhci_hcd [16360.236266] usb 1-1.4: New USB device found, idVendor=17ef, idProduct=100f, bcdDevice= 0.01 [16360.236280] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [16360.236287] usb 1-1.4: Product: Lenovo ThinkPad Dock [16360.236292] usb 1-1.4: Manufacturer: Lenovo [16360.236296] usb 1-1.4: SerialNumber: Rev1.2 [16360.237538] hub 1-1.4:1.0: USB hub found [16360.237588] hub 1-1.4:1.0: 3 ports detected [16360.319825] usb 1-1.2.1: new high-speed USB device number 7 using xhci_hcd [16360.419987] usb 1-1.2.1: New USB device found, idVendor=0424, idProduct=2640, bcdDevice= 0.00 [16360.420002] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [16360.421213] hub 1-1.2.1:1.0: USB hub found [16360.421272] hub 1-1.2.1:1.0: 3 ports detected [16360.527815] usb 1-1.4.1: new low-speed USB device number 8 using xhci_hcd [16360.634633] usb 1-1.4.1: New USB device found, idVendor=17f6, idProduct=0709, bcdDevice= 2.15 [16360.634648] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [16360.634655] usb 1-1.4.1: Product: Endura Keyboard [16360.634660] usb 1-1.4.1: Manufacturer: Unicomp [16360.707761] usb 1-1.2.1.1: new high-speed USB device number 9 using xhci_hcd [16360.822324] hid: raw HID events driver (C) Jiri Kosina [16360.837885] usbcore: registered new interface driver usbhid [16360.837907] usbhid: USB HID core driver [16360.855498] usb 1-1.2.1.1: New USB device found, idVendor=0424, idProduct=4060, bcdDevice= 1.82 [16360.855517] usb 1-1.2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [16360.855526] usb 1-1.2.1.1: Product: Ultra Fast Media Reader [16360.855534] usb 1-1.2.1.1: Manufacturer: Generic [16360.855541] usb 1-1.2.1.1: SerialNumber: F120A6013FBB [16360.857808] usb-storage 1-1.2.1.1:1.0: USB Mass Storage device detected [16360.858213] scsi host4: usb-storage 1-1.2.1.1:1.0 [16360.868371] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C077.0001/input/input18 [16360.868936] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1.1/input0 [16360.869380] input: Unicomp Endura Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:17F6:0709.0002/input/input19 [16360.895745] usb 1-1.4.2: new full-speed USB device number 10 using xhci_hcd [16360.928606] hid-generic 0003:17F6:0709.0002: input,hidraw1: USB HID v1.10 Keyboard [Unicomp Endura Keyboard ] on usb-0000:00:14.0-1.4.1/input0 [16361.001909] usb 1-1.4.2: New USB device found, idVendor=08bb, idProduct=2902, bcdDevice= 1.00 [16361.001924] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [16361.001931] usb 1-1.4.2: Product: USB Audio CODEC [16361.001936] usb 1-1.4.2: Manufacturer: Burr-Brown from TI [16361.006882] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.3/0003:08BB:2902.0003/input/input20 [16361.063858] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-1.4.2/input3 [16361.143584] usb 1-1.4.3: new high-speed USB device number 11 using xhci_hcd [16361.246211] usb 1-1.4.3: New USB device found, idVendor=04a9, idProduct=1912, bcdDevice= 1.00 [16361.246226] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [16361.246232] usb 1-1.4.3: Product: LiDE 400 [16361.246237] usb 1-1.4.3: Manufacturer: Canon [16361.246241] usb 1-1.4.3: SerialNumber: 45EA12 [16361.658167] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [16361.658324] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [16361.898878] scsi 4:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [16361.899852] sd 4:0:0:0: Attached scsi generic sg2 type 0 [16361.935939] sd 4:0:0:0: [sdc] Attached SCSI removable disk [16361.986072] mc: Linux media interface: v0.10 [16362.081886] usbcore: registered new interface driver snd-usb-audio [16362.822186] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [16362.831162] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [16362.944987] wlp4s0: authenticated [16362.947324] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [16362.993787] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [16363.008842] wlp4s0: associated [16363.142398] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [16629.086788] usb 1-1.2.1.3: new full-speed USB device number 12 using xhci_hcd [16629.187285] usb 1-1.2.1.3: device descriptor read/all, error -32 [16629.474798] usb 1-1.2.1.3: new full-speed USB device number 13 using xhci_hcd [16629.577156] usb 1-1.2.1.3: New USB device found, idVendor=091e, idProduct=0003, bcdDevice= 0.01 [16629.577169] usb 1-1.2.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [16663.926594] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [19497.958186] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [19498.880091] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [19740.059955] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000004e0a174f port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [19740.063447] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000004e0a174f port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [22514.070797] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [22516.515012] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [22516.525044] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [22516.598710] wlp4s0: authenticated [22516.599868] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [22516.703985] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 2/3) [22516.807938] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 3/3) [22516.824724] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [22516.838320] wlp4s0: associated [24427.421077] usb 1-1.2.1.2: new high-speed USB device number 14 using xhci_hcd [24427.522325] usb 1-1.2.1.2: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.00 [24427.522339] usb 1-1.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [24427.522344] usb 1-1.2.1.2: Product: Cruzer Force [24427.522349] usb 1-1.2.1.2: Manufacturer: SanDisk [24427.522352] usb 1-1.2.1.2: SerialNumber: 4C530001011112114034 [24427.526928] usb-storage 1-1.2.1.2:1.0: USB Mass Storage device detected [24427.532598] scsi host5: usb-storage 1-1.2.1.2:1.0 [24428.550557] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6 [24428.551341] sd 5:0:0:0: Attached scsi generic sg3 type 0 [24428.551740] sd 5:0:0:0: [sdd] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) [24428.553348] sd 5:0:0:0: [sdd] Write Protect is off [24428.553361] sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00 [24428.553762] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [24428.582162] sdd: sdd1 [24428.584091] sd 5:0:0:0: [sdd] Attached SCSI removable disk [24518.774133] usb 1-1.2.1.2: USB disconnect, device number 14 [25517.893800] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [25518.603326] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [25518.611695] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [25518.686483] wlp4s0: authenticated [25518.688907] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [25518.793099] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 2/3) [25518.878095] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [25518.894592] wlp4s0: associated [26104.150196] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [26106.180290] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [26106.189909] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [26106.296149] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 2/3) [26106.362368] wlp4s0: authenticated [26106.366206] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [26106.406727] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [26106.411779] wlp4s0: associated [27975.094429] usb 1-1.2.1.2: new high-speed USB device number 15 using xhci_hcd [27975.195463] usb 1-1.2.1.2: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.00 [27975.195478] usb 1-1.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [27975.195485] usb 1-1.2.1.2: Product: Cruzer Force [27975.195490] usb 1-1.2.1.2: Manufacturer: SanDisk [27975.195494] usb 1-1.2.1.2: SerialNumber: 4C530001011112114034 [27975.197682] usb-storage 1-1.2.1.2:1.0: USB Mass Storage device detected [27975.197980] scsi host5: usb-storage 1-1.2.1.2:1.0 [27976.211380] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6 [27976.211978] sd 5:0:0:0: Attached scsi generic sg3 type 0 [27976.212404] sd 5:0:0:0: [sdd] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) [27976.213928] sd 5:0:0:0: [sdd] Write Protect is off [27976.213936] sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00 [27976.215354] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [27976.251280] sdd: sdd1 [27976.252899] sd 5:0:0:0: [sdd] Attached SCSI removable disk [28058.247483] usb 1-1.2.1.2: USB disconnect, device number 15 [29103.620895] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [29106.150489] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [29106.158561] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [29106.163467] wlp4s0: authenticated [29106.163756] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [29106.272124] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 2/3) [29106.345155] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [29106.348098] wlp4s0: associated [32455.657385] usb 1-1.3: new high-speed USB device number 16 using xhci_hcd [32455.770262] usb 1-1.3: New USB device found, idVendor=0482, idProduct=065c, bcdDevice= 0.00 [32455.770275] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [32455.770281] usb 1-1.3: Product: Kyocera ECOSYS P2135d [32455.770285] usb 1-1.3: Manufacturer: Kyocera [32455.770289] usb 1-1.3: SerialNumber: LXR4104309 [32456.328880] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x0482 pid 0x065C [32456.329378] usbcore: registered new interface driver usblp [32461.456137] usblp0: removed [32461.457821] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x0482 pid 0x065C [32463.465296] usblp0: removed [32467.722385] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x0482 pid 0x065C [33411.039927] usb 1-1.2.1.2: new high-speed USB device number 17 using xhci_hcd [33411.141185] usb 1-1.2.1.2: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.00 [33411.141199] usb 1-1.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33411.141204] usb 1-1.2.1.2: Product: Cruzer Force [33411.141209] usb 1-1.2.1.2: Manufacturer: SanDisk [33411.141213] usb 1-1.2.1.2: SerialNumber: 4C530001011112114034 [33411.145971] usb-storage 1-1.2.1.2:1.0: USB Mass Storage device detected [33411.146327] scsi host5: usb-storage 1-1.2.1.2:1.0 [33412.157277] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6 [33412.157949] sd 5:0:0:0: Attached scsi generic sg3 type 0 [33412.158334] sd 5:0:0:0: [sdd] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) [33412.159888] sd 5:0:0:0: [sdd] Write Protect is off [33412.159898] sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00 [33412.160305] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [33412.197582] sdd: sdd1 [33412.199871] sd 5:0:0:0: [sdd] Attached SCSI removable disk [33450.661309] usb 1-1.2.1.2: USB disconnect, device number 17 [33629.781752] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [33629.781993] wlp4s0: deauthenticating from 24:65:11:a6:d5:e3 by local choice (Reason: 3=DEAUTH_LEAVING) [33629.969404] PM: suspend entry (deep) [33629.984087] Filesystems sync: 0.014 seconds [33629.984678] Freezing user space processes ... (elapsed 0.007 seconds) done. [33629.992306] OOM killer disabled. [33629.992308] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [33629.993686] printk: Suspending console(s) (use no_console_suspend to debug) [33630.164471] sd 2:0:0:0: [sda] Synchronizing SCSI cache [33630.165779] sd 2:0:0:0: [sda] Stopping disk [33630.196200] e1000e: EEE TX LPI TIMER: 00000011 [33630.273126] ACPI: EC: interrupt blocked [33630.332906] ACPI: Preparing to enter system sleep state S3 [33630.340495] ACPI: EC: event blocked [33630.340498] ACPI: EC: EC stopped [33630.340500] PM: Saving platform NVS memory [33630.340509] Disabling non-boot CPUs ... [33630.341143] IRQ 128: no longer affine to CPU1 [33630.342170] smpboot: CPU 1 is now offline [33630.345680] smpboot: CPU 2 is now offline [33630.347236] IRQ 130: no longer affine to CPU3 [33630.348268] smpboot: CPU 3 is now offline [33630.352905] ACPI: Low-level resume complete [33630.353142] ACPI: EC: EC started [33630.353146] PM: Restoring platform NVS memory [33630.364757] Enabling non-boot CPUs ... [33630.364916] x86: Booting SMP configuration: [33630.364920] smpboot: Booting Node 0 Processor 1 APIC 0x2 [33630.378960] CPU1 is up [33630.379088] smpboot: Booting Node 0 Processor 2 APIC 0x1 [33630.383192] CPU2 is up [33630.383319] smpboot: Booting Node 0 Processor 3 APIC 0x3 [33630.386847] CPU3 is up [33630.393563] ACPI: Waking up from system sleep state S3 [33630.488162] ACPI: EC: interrupt unblocked [33630.530789] ACPI: EC: event unblocked [33630.534224] sd 2:0:0:0: [sda] Starting disk [33630.559419] usb 2-3: Disable of device-initiated U1 failed. [33630.562917] usb 2-3: Disable of device-initiated U2 failed. [33630.765115] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [33630.847094] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [33630.848784] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33630.848813] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33630.848833] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33630.848927] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [33630.849245] ata3.00: supports DRM functions and may not be fully accessible [33630.853307] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [33630.853328] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [33630.853345] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [33630.853430] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [33630.853760] ata3.00: supports DRM functions and may not be fully accessible [33630.856199] ata3.00: configured for UDMA/133 [33630.867009] ata3.00: Enabling discard_zeroes_data [33631.237104] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [33631.266968] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [33633.006068] i915 0000:00:02.0: [drm] *ERROR* failed to enable link training [33633.276200] i915 0000:00:02.0: [drm] *ERROR* failed to allocate vcpi [33633.621590] acpi LNXPOWER:02: Turning OFF [33633.621695] acpi LNXPOWER:01: Turning OFF [33633.622171] OOM killer enabled. [33633.622174] Restarting tasks ... [33633.622251] usb 2-1: USB disconnect, device number 3 [33633.630023] done. [33633.633189] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [33633.633833] thermal thermal_zone3: failed to read out thermal zone (-61) [33633.637440] usb 1-1: USB disconnect, device number 3 [33633.637452] usb 1-1.1: USB disconnect, device number 4 [33633.677937] usb 1-1.2: USB disconnect, device number 5 [33633.677950] usb 1-1.2.1: USB disconnect, device number 7 [33633.677959] usb 1-1.2.1.1: USB disconnect, device number 9 [33633.695844] PM: suspend exit [33633.772049] usb 1-1.2.1.3: USB disconnect, device number 13 [33633.774272] usb 1-1.3: USB disconnect, device number 16 [33633.774356] usblp0: removed [33633.774819] usb 1-1.4: USB disconnect, device number 6 [33633.774823] usb 1-1.4.1: USB disconnect, device number 8 [33633.857254] usb 1-1.4.2: USB disconnect, device number 10 [33633.897087] usb 1-1.4.3: USB disconnect, device number 11 [33634.933689] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [33635.071353] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [33635.140713] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [33638.749132] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33638.759751] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33638.767894] wlp4s0: authenticated [33638.768291] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [33638.768303] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [33638.768672] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [33638.775035] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [33638.779320] wlp4s0: associated [33648.781432] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [33649.534897] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33649.543785] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33649.648622] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33649.755317] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33649.860897] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33651.749671] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33651.758796] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33651.864647] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33651.971324] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33652.076895] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33661.631115] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33661.640878] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33661.752905] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33661.859044] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33661.968667] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33664.213299] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33664.220959] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33664.332654] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33664.438956] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33664.544976] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33677.231021] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33677.241483] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33677.348694] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33677.455416] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33677.560947] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33689.189084] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33689.197776] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33689.308715] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33689.414688] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33689.520994] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33702.202481] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33702.213705] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33702.333021] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33702.439574] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33702.545014] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33715.171891] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33715.179584] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33715.285045] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33715.391555] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33715.493056] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33731.563075] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33731.570189] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33731.676794] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33731.783574] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33731.885078] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33743.282684] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33743.289897] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33743.396805] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33743.503593] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33743.609041] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [33754.511372] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [33754.518972] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [33754.625136] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [33754.731107] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [33754.836839] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34069.206024] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34069.213601] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34069.321709] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34069.428258] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34069.533772] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34080.093178] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34080.100957] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34080.205819] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34080.312387] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34080.417807] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34094.184752] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34094.192341] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34094.297791] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34094.404379] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34094.505837] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34112.727455] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34112.735535] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34112.845886] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34112.952448] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34113.057872] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34120.712817] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34120.721556] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34120.833833] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34120.940420] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34121.045891] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34131.952658] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34131.960498] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34132.069918] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34132.176473] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34132.281629] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34146.179780] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34146.187409] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34146.293935] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34146.399666] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34146.505935] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34157.070387] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34157.079046] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34157.185658] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [34157.292587] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [34157.397952] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [34474.348981] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34474.357690] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34474.364778] wlp4s0: authenticated [34474.365210] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [34474.365218] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [34474.366270] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [34474.370429] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [34474.374557] wlp4s0: associated [34478.355875] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [34489.563670] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34489.573651] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34489.584077] wlp4s0: authenticated [34489.584497] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [34489.584508] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [34489.588077] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [34489.591882] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [34489.598476] wlp4s0: associated [34493.576610] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [34496.682418] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34496.690618] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34496.694939] wlp4s0: authenticated [34496.695411] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [34496.695423] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [34496.698330] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [34496.702490] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [34496.705541] wlp4s0: associated [34500.685370] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [34513.294077] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34513.303666] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34513.306599] wlp4s0: authenticated [34513.307601] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [34513.307612] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [34513.310383] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [34513.314527] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [34513.319048] wlp4s0: associated [34517.292821] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [34521.682659] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34521.692110] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34521.696096] wlp4s0: authenticated [34521.696500] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [34521.696510] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [34521.698366] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [34521.702688] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [34521.704772] wlp4s0: associated [34525.687044] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [34536.335181] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [34536.346068] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [34536.352336] wlp4s0: authenticated [34536.352751] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [34536.352763] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [34536.354407] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [34536.357143] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [34536.359353] wlp4s0: associated [34540.333522] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [35054.681635] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [35055.189725] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [35056.313360] PM: suspend entry (deep) [35056.318275] Filesystems sync: 0.004 seconds [35056.319654] Freezing user space processes ... (elapsed 0.002 seconds) done. [35056.322004] OOM killer disabled. [35056.322006] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35056.323310] printk: Suspending console(s) (use no_console_suspend to debug) [35056.495503] sd 2:0:0:0: [sda] Synchronizing SCSI cache [35056.496818] sd 2:0:0:0: [sda] Stopping disk [35056.518783] e1000e: EEE TX LPI TIMER: 00000011 [35056.880603] ACPI: EC: interrupt blocked [35056.936077] ACPI: Preparing to enter system sleep state S3 [35056.942869] ACPI: EC: event blocked [35056.942872] ACPI: EC: EC stopped [35056.942873] PM: Saving platform NVS memory [35056.942881] Disabling non-boot CPUs ... [35056.943404] IRQ 128: no longer affine to CPU1 [35056.944423] smpboot: CPU 1 is now offline [35056.947426] smpboot: CPU 2 is now offline [35056.948644] IRQ 130: no longer affine to CPU3 [35056.949665] smpboot: CPU 3 is now offline [35056.953922] ACPI: Low-level resume complete [35056.954167] ACPI: EC: EC started [35056.954171] PM: Restoring platform NVS memory [35056.965711] Enabling non-boot CPUs ... [35056.965877] x86: Booting SMP configuration: [35056.965881] smpboot: Booting Node 0 Processor 1 APIC 0x2 [35056.979978] CPU1 is up [35056.980107] smpboot: Booting Node 0 Processor 2 APIC 0x1 [35056.984297] CPU2 is up [35056.984423] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35056.987954] CPU3 is up [35056.994709] ACPI: Waking up from system sleep state S3 [35057.087107] ACPI: EC: interrupt unblocked [35057.129547] ACPI: EC: event unblocked [35057.131401] sd 2:0:0:0: [sda] Starting disk [35057.155599] usb 2-3: Disable of device-initiated U1 failed. [35057.159497] usb 2-3: Disable of device-initiated U2 failed. [35057.356488] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [35057.443008] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35057.444645] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35057.444674] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35057.444691] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35057.444882] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35057.445357] ata3.00: supports DRM functions and may not be fully accessible [35057.449445] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35057.449473] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35057.449490] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35057.449576] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35057.449919] ata3.00: supports DRM functions and may not be fully accessible [35057.452485] ata3.00: configured for UDMA/133 [35057.463295] ata3.00: Enabling discard_zeroes_data [35057.867248] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [35057.900049] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [35058.036095] acpi LNXPOWER:02: Turning OFF [35058.036373] acpi LNXPOWER:01: Turning OFF [35058.037267] OOM killer enabled. [35058.037276] Restarting tasks ... done. [35058.078510] thermal thermal_zone3: failed to read out thermal zone (-61) [35058.149169] PM: suspend exit [35059.034058] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [35059.366834] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [35059.501851] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [35059.571487] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [35063.174162] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [35063.186197] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [35063.202583] wlp4s0: authenticated [35063.202982] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [35063.202993] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [35063.203864] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [35063.206586] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=3) [35063.210293] wlp4s0: associated [35073.212774] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [35073.960277] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [35073.969274] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [35074.075786] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [35074.186020] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [35074.288084] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [35075.959199] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [35075.969531] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [35076.076070] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [35076.182623] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [35076.291862] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [35076.623620] audit: type=1400 audit(1629215077.663:47): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=26823 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000 [35076.623628] audit: type=1400 audit(1629215077.663:48): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=26823 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [35076.623632] audit: type=1400 audit(1629215077.663:49): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=26823 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [35076.623669] audit: type=1400 audit(1629215077.663:50): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=26823 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000 [35076.623674] audit: type=1400 audit(1629215077.663:51): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=26823 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000 [35077.310777] audit: type=1400 audit(1629215078.351:52): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=26243 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [35077.310833] audit: type=1400 audit(1629215078.351:53): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=26243 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [35085.848108] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [35085.859146] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [35085.964124] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [35086.070052] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [35086.171834] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [35089.193970] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [35089.201930] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [35089.312125] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [35089.417954] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [35089.520106] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [35102.200576] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [35102.208295] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [35102.320156] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [35102.426430] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [35102.532138] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [35117.077592] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [35117.582537] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [35118.738266] PM: suspend entry (deep) [35118.743309] Filesystems sync: 0.005 seconds [35118.744656] Freezing user space processes ... (elapsed 0.002 seconds) done. [35118.747007] OOM killer disabled. [35118.747009] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [35118.748059] printk: Suspending console(s) (use no_console_suspend to debug) [35118.915943] sd 2:0:0:0: [sda] Synchronizing SCSI cache [35118.917292] sd 2:0:0:0: [sda] Stopping disk [35118.942915] e1000e: EEE TX LPI TIMER: 00000011 [35119.297089] ACPI: EC: interrupt blocked [35119.352581] ACPI: Preparing to enter system sleep state S3 [35119.359016] ACPI: EC: event blocked [35119.359017] ACPI: EC: EC stopped [35119.359017] PM: Saving platform NVS memory [35119.359022] Disabling non-boot CPUs ... [35119.359255] IRQ 128: no longer affine to CPU1 [35119.360255] smpboot: CPU 1 is now offline [35119.362126] smpboot: CPU 2 is now offline [35119.362711] IRQ 130: no longer affine to CPU3 [35119.363709] smpboot: CPU 3 is now offline [35119.365931] ACPI: Low-level resume complete [35119.366024] ACPI: EC: EC started [35119.366024] PM: Restoring platform NVS memory [35119.367916] Enabling non-boot CPUs ... [35119.367954] x86: Booting SMP configuration: [35119.367954] smpboot: Booting Node 0 Processor 1 APIC 0x2 [35119.369766] CPU1 is up [35119.369788] smpboot: Booting Node 0 Processor 2 APIC 0x1 [35119.370446] CPU2 is up [35119.370470] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35119.371043] CPU3 is up [35119.372188] ACPI: Waking up from system sleep state S3 [35119.394305] ACPI: EC: interrupt unblocked [35119.436598] ACPI: EC: event unblocked [35119.437424] sd 2:0:0:0: [sda] Starting disk [35119.573152] usb 2-3: Disable of device-initiated U1 failed. [35119.576657] usb 2-3: Disable of device-initiated U2 failed. [35119.753213] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35119.753707] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35119.753710] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35119.753712] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35119.753796] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35119.754100] ata3.00: supports DRM functions and may not be fully accessible [35119.757224] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35119.757227] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35119.757229] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [35119.757337] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35119.757686] ata3.00: supports DRM functions and may not be fully accessible [35119.760249] ata3.00: configured for UDMA/133 [35119.770735] ata3.00: Enabling discard_zeroes_data [35119.774770] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [35120.175996] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [35120.209370] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [35120.326048] acpi LNXPOWER:02: Turning OFF [35120.326081] acpi LNXPOWER:01: Turning OFF [35120.327238] OOM killer enabled. [35120.327239] Restarting tasks ... done. [35120.333596] thermal thermal_zone3: failed to read out thermal zone (-61) [35120.397484] PM: suspend exit [35120.458297] usb 1-1: new high-speed USB device number 18 using xhci_hcd [35120.565861] audit: type=1400 audit(1629265395.191:54): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=27104 comm="cups-browsed" capability=23 capname="sys_nice" [35120.615725] usb 1-1: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.40 [35120.615730] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [35120.615732] usb 1-1: Product: Lenovo ThinkPad Dock [35120.615733] usb 1-1: Manufacturer: LENOVO [35120.616448] hub 1-1:1.0: USB hub found [35120.616791] hub 1-1:1.0: 4 ports detected [35120.747967] usb 2-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [35120.882623] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [35121.003962] usb 2-1: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.41 [35121.003981] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [35121.003988] usb 2-1: Product: Lenovo ThinkPad Dock [35121.003992] usb 2-1: Manufacturer: LENOVO [35121.005922] hub 2-1:1.0: USB hub found [35121.006170] hub 2-1:1.0: 4 ports detected [35121.016641] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [35121.084603] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [35121.134306] usb 1-1.1: new low-speed USB device number 19 using xhci_hcd [35121.295823] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [35121.295838] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [35121.295844] usb 1-1.1: Product: USB Optical Mouse [35121.295849] usb 1-1.1: Manufacturer: Logitech [35121.301551] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C077.0004/input/input21 [35121.301894] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1.1/input0 [35121.394616] usb 1-1.2: new high-speed USB device number 20 using xhci_hcd [35121.506807] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [35121.506822] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [35121.508146] hub 1-1.2:1.0: USB hub found [35121.508208] hub 1-1.2:1.0: 3 ports detected [35121.537230] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [35121.602389] usb 1-1.3: new high-speed USB device number 21 using xhci_hcd [35121.715001] usb 1-1.3: New USB device found, idVendor=0482, idProduct=065c, bcdDevice= 0.00 [35121.715015] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35121.715022] usb 1-1.3: Product: Kyocera ECOSYS P2135d [35121.715027] usb 1-1.3: Manufacturer: Kyocera [35121.715031] usb 1-1.3: SerialNumber: LXR4104309 [35121.716936] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x0482 pid 0x065C [35121.794610] usb 1-1.2.1: new high-speed USB device number 22 using xhci_hcd [35121.894818] usb 1-1.2.1: New USB device found, idVendor=0424, idProduct=2640, bcdDevice= 0.00 [35121.894832] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [35121.896104] hub 1-1.2.1:1.0: USB hub found [35121.896166] hub 1-1.2.1:1.0: 3 ports detected [35121.986312] usb 1-1.4: new high-speed USB device number 23 using xhci_hcd [35122.098774] usb 1-1.4: New USB device found, idVendor=17ef, idProduct=100f, bcdDevice= 0.01 [35122.098788] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35122.098794] usb 1-1.4: Product: Lenovo ThinkPad Dock [35122.098799] usb 1-1.4: Manufacturer: Lenovo [35122.098803] usb 1-1.4: SerialNumber: Rev1.2 [35122.100093] hub 1-1.4:1.0: USB hub found [35122.100188] hub 1-1.4:1.0: 3 ports detected [35122.182674] usb 1-1.2.1.1: new high-speed USB device number 24 using xhci_hcd [35122.326340] usb 1-1.2.1.1: New USB device found, idVendor=0424, idProduct=4060, bcdDevice= 1.82 [35122.326359] usb 1-1.2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35122.326368] usb 1-1.2.1.1: Product: Ultra Fast Media Reader [35122.326374] usb 1-1.2.1.1: Manufacturer: Generic [35122.326381] usb 1-1.2.1.1: SerialNumber: F120A6013FBB [35122.328660] usb-storage 1-1.2.1.1:1.0: USB Mass Storage device detected [35122.329127] scsi host4: usb-storage 1-1.2.1.1:1.0 [35122.386623] usb 1-1.4.1: new low-speed USB device number 25 using xhci_hcd [35122.493945] usb 1-1.4.1: New USB device found, idVendor=17f6, idProduct=0709, bcdDevice= 2.15 [35122.493960] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [35122.493967] usb 1-1.4.1: Product: Endura Keyboard [35122.493972] usb 1-1.4.1: Manufacturer: Unicomp [35122.504436] input: Unicomp Endura Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:17F6:0709.0005/input/input22 [35122.563512] hid-generic 0003:17F6:0709.0005: input,hidraw1: USB HID v1.10 Keyboard [Unicomp Endura Keyboard ] on usb-0000:00:14.0-1.4.1/input0 [35122.566492] usb 1-1.2.1.3: new full-speed USB device number 26 using xhci_hcd [35122.666547] usb 1-1.2.1.3: device descriptor read/all, error -32 [35122.750683] usb 1-1.4.2: new full-speed USB device number 27 using xhci_hcd [35122.856993] usb 1-1.4.2: New USB device found, idVendor=08bb, idProduct=2902, bcdDevice= 1.00 [35122.857004] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [35122.857009] usb 1-1.4.2: Product: USB Audio CODEC [35122.857013] usb 1-1.4.2: Manufacturer: Burr-Brown from TI [35122.913748] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.3/0003:08BB:2902.0006/input/input23 [35122.971237] hid-generic 0003:08BB:2902.0006: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-1.4.2/input3 [35123.138632] usb 1-1.2.1.3: new full-speed USB device number 28 using xhci_hcd [35123.240803] usb 1-1.2.1.3: New USB device found, idVendor=091e, idProduct=0003, bcdDevice= 0.01 [35123.240821] usb 1-1.2.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [35123.318381] usb 1-1.4.3: new high-speed USB device number 29 using xhci_hcd [35123.349951] scsi 4:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [35123.350899] sd 4:0:0:0: Attached scsi generic sg2 type 0 [35123.398935] sd 4:0:0:0: [sdc] Attached SCSI removable disk [35123.421202] usb 1-1.4.3: New USB device found, idVendor=04a9, idProduct=1912, bcdDevice= 1.00 [35123.421217] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35123.421223] usb 1-1.4.3: Product: LiDE 400 [35123.421228] usb 1-1.4.3: Manufacturer: Canon [35123.421232] usb 1-1.4.3: SerialNumber: 45EA12 [35123.517024] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [35123.517080] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [35124.220368] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000009fc927ba port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [35124.223793] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000009fc927ba port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [35124.762728] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [35124.769780] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [35124.777994] wlp4s0: authenticated [35124.778291] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [35124.880739] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [35124.884314] wlp4s0: associated [35124.919828] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [35127.776314] usblp0: removed [35127.777425] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x0482 pid 0x065C [35136.960845] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000009fc927ba port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [35136.964031] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000009fc927ba port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [35425.795088] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [35426.819567] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 1 (2412.000/0 MHz) [35427.741050] wlp4s0: AP 24:65:11:a6:d5:e3 changed bandwidth, new config is 2412.000 MHz, width 2 (2422.000/0 MHz) [35980.092058] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [35982.345830] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [35982.356782] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [35982.365942] wlp4s0: authenticated [35982.367981] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [35982.375078] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [35982.378577] wlp4s0: associated [36320.535896] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [36320.540248] JFS: nTxBlock = 8192, nTxLock = 65536 [36320.549644] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [36320.563348] QNX4 filesystem 0.2.3 registered. [36320.636659] raid6: avx2x4 gen() 38018 MB/s [36320.704659] raid6: avx2x4 xor() 17908 MB/s [36320.772659] raid6: avx2x2 gen() 38148 MB/s [36320.840665] raid6: avx2x2 xor() 22315 MB/s [36320.908659] raid6: avx2x1 gen() 32452 MB/s [36320.976666] raid6: avx2x1 xor() 17885 MB/s [36321.044662] raid6: sse2x4 gen() 15838 MB/s [36321.112628] raid6: sse2x4 xor() 9230 MB/s [36321.180659] raid6: sse2x2 gen() 16183 MB/s [36321.248665] raid6: sse2x2 xor() 9759 MB/s [36321.316660] raid6: sse2x1 gen() 13559 MB/s [36321.384666] raid6: sse2x1 xor() 6917 MB/s [36321.384667] raid6: using algorithm avx2x2 gen() 38148 MB/s [36321.384668] raid6: .... xor() 22315 MB/s, rmw enabled [36321.384669] raid6: using avx2x2 recovery algorithm [36321.385496] xor: automatically using best checksumming function avx [36321.403162] Btrfs loaded, crc32c=crc32c-intel, zoned=yes [37216.479737] audit: type=1400 audit(1629267491.690:55): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=74544 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000 [37216.479747] audit: type=1400 audit(1629267491.690:56): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=74544 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [37216.479753] audit: type=1400 audit(1629267491.690:57): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=74544 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [37216.479866] audit: type=1400 audit(1629267491.690:58): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=74544 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000 [37216.479875] audit: type=1400 audit(1629267491.690:59): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_20452839330a866d718c0a8fbf65f24" pid=74544 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000 [37765.136398] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [37767.787392] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [37767.795320] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [37767.800313] wlp4s0: authenticated [37767.802405] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [37767.809717] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [37767.814152] wlp4s0: associated [38702.442507] usb 1-1.3: USB disconnect, device number 21 [38702.442954] usblp0: removed [40203.350791] usb 1-1.2.1.2: new high-speed USB device number 30 using xhci_hcd [40203.452051] usb 1-1.2.1.2: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.00 [40203.452066] usb 1-1.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [40203.452072] usb 1-1.2.1.2: Product: Cruzer Force [40203.452077] usb 1-1.2.1.2: Manufacturer: SanDisk [40203.452081] usb 1-1.2.1.2: SerialNumber: 4C530001011112114034 [40203.455149] usb-storage 1-1.2.1.2:1.0: USB Mass Storage device detected [40203.456637] scsi host5: usb-storage 1-1.2.1.2:1.0 [40204.480213] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6 [40204.480953] sd 5:0:0:0: Attached scsi generic sg3 type 0 [40204.481384] sd 5:0:0:0: [sdd] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) [40204.483197] sd 5:0:0:0: [sdd] Write Protect is off [40204.483209] sd 5:0:0:0: [sdd] Mode Sense: 43 00 00 00 [40204.483645] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [40204.508089] sdd: sdd1 [40204.510067] sd 5:0:0:0: [sdd] Attached SCSI removable disk [40912.983549] wlp4s0: deauthenticating from 24:65:11:a6:d5:e3 by local choice (Reason: 3=DEAUTH_LEAVING) [40913.086273] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [40913.232628] PM: suspend entry (deep) [40913.241861] Filesystems sync: 0.009 seconds [40913.242474] Freezing user space processes ... (elapsed 0.030 seconds) done. [40913.273065] OOM killer disabled. [40913.273068] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [40913.274790] printk: Suspending console(s) (use no_console_suspend to debug) [40913.472483] sd 2:0:0:0: [sda] Synchronizing SCSI cache [40913.473817] sd 2:0:0:0: [sda] Stopping disk [40913.496598] e1000e: EEE TX LPI TIMER: 00000011 [40913.593581] ACPI: EC: interrupt blocked [40913.653235] ACPI: Preparing to enter system sleep state S3 [40913.661401] ACPI: EC: event blocked [40913.661404] ACPI: EC: EC stopped [40913.661406] PM: Saving platform NVS memory [40913.661416] Disabling non-boot CPUs ... [40913.662183] IRQ 128: no longer affine to CPU1 [40913.663219] smpboot: CPU 1 is now offline [40913.667092] smpboot: CPU 2 is now offline [40913.668881] IRQ 130: no longer affine to CPU3 [40913.669896] smpboot: CPU 3 is now offline [40913.674719] ACPI: Low-level resume complete [40913.674965] ACPI: EC: EC started [40913.674969] PM: Restoring platform NVS memory [40913.686724] Enabling non-boot CPUs ... [40913.686886] x86: Booting SMP configuration: [40913.686889] smpboot: Booting Node 0 Processor 1 APIC 0x2 [40913.701047] CPU1 is up [40913.701167] smpboot: Booting Node 0 Processor 2 APIC 0x1 [40913.705360] CPU2 is up [40913.705488] smpboot: Booting Node 0 Processor 3 APIC 0x3 [40913.709152] CPU3 is up [40913.715840] ACPI: Waking up from system sleep state S3 [40913.810072] ACPI: EC: interrupt unblocked [40913.854961] ACPI: EC: event unblocked [40913.858455] sd 2:0:0:0: [sda] Starting disk [40913.883797] usb 2-3: Disable of device-initiated U1 failed. [40913.887273] usb 2-3: Disable of device-initiated U2 failed. [40914.089405] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [40914.171411] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [40914.173070] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [40914.173097] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [40914.173116] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [40914.173214] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [40914.173538] ata3.00: supports DRM functions and may not be fully accessible [40914.177581] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [40914.177601] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [40914.177617] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [40914.177705] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [40914.178029] ata3.00: supports DRM functions and may not be fully accessible [40914.180494] ata3.00: configured for UDMA/133 [40914.191258] ata3.00: Enabling discard_zeroes_data [40914.561826] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [40914.590786] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [40916.326441] i915 0000:00:02.0: [drm] *ERROR* failed to enable link training [40916.596567] i915 0000:00:02.0: [drm] *ERROR* failed to allocate vcpi [40916.946274] acpi LNXPOWER:02: Turning OFF [40916.946378] acpi LNXPOWER:01: Turning OFF [40916.946861] OOM killer enabled. [40916.946864] Restarting tasks ... [40916.946957] usb 1-1: USB disconnect, device number 18 [40916.946959] usb 2-1: USB disconnect, device number 4 [40916.946967] usb 1-1.1: USB disconnect, device number 19 [40916.952989] done. [40916.958876] thermal thermal_zone3: failed to read out thermal zone (-61) [40916.961453] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [40916.990703] usb 1-1.2: USB disconnect, device number 20 [40916.990718] usb 1-1.2.1: USB disconnect, device number 22 [40916.990727] usb 1-1.2.1.1: USB disconnect, device number 24 [40917.029442] PM: suspend exit [40917.084078] usb 1-1.2.1.2: USB disconnect, device number 30 [40917.105691] usb 1-1.2.1.3: USB disconnect, device number 28 [40917.107770] usb 1-1.4: USB disconnect, device number 23 [40917.107778] usb 1-1.4.1: USB disconnect, device number 25 [40917.122160] FAT-fs (sdd1): unable to read boot sector to mark fs as dirty [40917.189642] usb 1-1.4.2: USB disconnect, device number 27 [40917.273553] usb 1-1.4.3: USB disconnect, device number 29 [40917.881693] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [40918.084009] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input24 [40918.419969] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [40918.554740] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [40918.624198] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [40922.256446] wlp4s0: authenticate with c8:b3:73:41:8f:95 [40922.265106] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [40922.393634] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [40922.484608] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [40922.572501] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [40950.276086] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [40950.283949] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [40950.291907] wlp4s0: authenticated [40950.292303] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [40950.292312] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [40950.293205] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [40950.296169] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=6) [40950.301694] wlp4s0: associated [40954.270544] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [40955.299290] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [40955.309254] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [40955.314396] wlp4s0: authenticated [40955.316253] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [40955.316267] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [40955.317235] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [40955.319970] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=6) [40955.322294] wlp4s0: associated [40959.302834] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [40959.979233] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [40959.992019] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [40959.998117] wlp4s0: authenticated [40959.998615] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [40959.998627] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [40960.001293] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [40960.007140] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=6) [40960.009382] wlp4s0: associated [40963.985150] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [40974.400924] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [40974.408245] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [40974.413202] wlp4s0: authenticated [40974.413648] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [40974.413658] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [40974.417394] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [40974.426982] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=6) [40974.432881] wlp4s0: associated [40975.689429] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [40975.739337] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [40975.747189] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [40975.853715] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [40975.963765] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [40976.065675] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [40988.656045] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [40988.666110] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [40988.773778] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [40988.884479] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [40988.989793] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41001.490597] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41001.499569] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41001.605612] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41001.711903] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41001.813888] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41012.700616] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41012.710876] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41012.817919] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41012.923905] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41013.025774] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41029.265773] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41029.273096] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41029.382163] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41029.488192] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41029.594025] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41040.488067] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41040.497691] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41040.605983] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41040.712055] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41040.813923] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41055.597698] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41055.605247] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41055.710376] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41055.817038] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41055.922080] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41066.815709] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41066.826981] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41066.934169] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41067.040088] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41067.142475] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41078.248036] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [41078.761061] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [41080.001137] PM: suspend entry (deep) [41080.006859] Filesystems sync: 0.005 seconds [41080.008390] Freezing user space processes ... (elapsed 0.002 seconds) done. [41080.010553] OOM killer disabled. [41080.010555] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41080.011939] printk: Suspending console(s) (use no_console_suspend to debug) [41080.182376] sd 2:0:0:0: [sda] Synchronizing SCSI cache [41080.183672] sd 2:0:0:0: [sda] Stopping disk [41080.212403] e1000e: EEE TX LPI TIMER: 00000011 [41080.567556] ACPI: EC: interrupt blocked [41080.623002] ACPI: Preparing to enter system sleep state S3 [41080.629595] ACPI: EC: event blocked [41080.629596] ACPI: EC: EC stopped [41080.629597] PM: Saving platform NVS memory [41080.629601] Disabling non-boot CPUs ... [41080.629863] IRQ 128: no longer affine to CPU1 [41080.630868] smpboot: CPU 1 is now offline [41080.632720] smpboot: CPU 2 is now offline [41080.633565] IRQ 127: no longer affine to CPU3 [41080.633570] IRQ 130: no longer affine to CPU3 [41080.634574] smpboot: CPU 3 is now offline [41080.638051] ACPI: Low-level resume complete [41080.638296] ACPI: EC: EC started [41080.638300] PM: Restoring platform NVS memory [41080.649836] Enabling non-boot CPUs ... [41080.650004] x86: Booting SMP configuration: [41080.650008] smpboot: Booting Node 0 Processor 1 APIC 0x2 [41080.664298] CPU1 is up [41080.664428] smpboot: Booting Node 0 Processor 2 APIC 0x1 [41080.668907] CPU2 is up [41080.669035] smpboot: Booting Node 0 Processor 3 APIC 0x3 [41080.672802] CPU3 is up [41080.679521] ACPI: Waking up from system sleep state S3 [41080.771482] ACPI: EC: interrupt unblocked [41080.816000] ACPI: EC: event unblocked [41080.818608] sd 2:0:0:0: [sda] Starting disk [41080.969551] usb 2-3: Disable of device-initiated U1 failed. [41080.973052] usb 2-3: Disable of device-initiated U2 failed. [41081.134291] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41081.135962] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41081.135992] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41081.136009] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41081.136186] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41081.136705] ata3.00: supports DRM functions and may not be fully accessible [41081.141595] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41081.141625] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41081.141642] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41081.141816] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41081.142311] ata3.00: supports DRM functions and may not be fully accessible [41081.145296] ata3.00: configured for UDMA/133 [41081.156335] ata3.00: Enabling discard_zeroes_data [41081.167114] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [41081.752091] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [41081.786179] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [41081.907514] acpi LNXPOWER:02: Turning OFF [41081.907628] acpi LNXPOWER:01: Turning OFF [41081.908163] OOM killer enabled. [41081.908166] Restarting tasks ... done. [41081.918612] thermal thermal_zone3: failed to read out thermal zone (-61) [41081.963749] PM: suspend exit [41082.716631] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [41083.212727] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [41083.348982] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [41083.418216] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [41087.030763] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41087.043065] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41087.181009] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [41087.267729] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [41087.322368] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [41113.645005] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41113.652796] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41113.762861] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41113.874468] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41113.978863] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41115.387001] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41115.396221] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41115.502877] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41115.609456] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41115.710898] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41117.611464] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41117.619241] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41117.726632] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41117.833349] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41117.938902] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41127.513432] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41127.523912] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41127.626725] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41127.733040] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41127.834734] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41140.451854] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41140.458969] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41140.563123] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41140.669359] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41140.770819] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41151.555497] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41151.563152] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41151.671208] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41151.777733] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41151.883157] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41166.682065] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41166.689010] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41166.791009] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41166.897075] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41166.999289] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41177.821251] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41177.830215] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41177.939122] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41178.045435] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41178.147356] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41192.578667] wlp4s0: authenticate with 92:63:99:9c:76:23 [41192.588141] wlp4s0: send auth to 92:63:99:9c:76:23 (try 1/3) [41192.599408] wlp4s0: authenticated [41192.603289] wlp4s0: associate with 92:63:99:9c:76:23 (try 1/3) [41192.629342] wlp4s0: RX AssocResp from 92:63:99:9c:76:23 (capab=0x431 status=0 aid=1) [41192.630958] wlp4s0: associated [41192.665324] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [41368.775041] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [41369.278776] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [41369.297652] wlp4s0: deauthenticating from 92:63:99:9c:76:23 by local choice (Reason: 3=DEAUTH_LEAVING) [41370.541163] PM: suspend entry (deep) [41370.546142] Filesystems sync: 0.004 seconds [41370.547431] Freezing user space processes ... (elapsed 0.002 seconds) done. [41370.549847] OOM killer disabled. [41370.549849] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41370.551209] printk: Suspending console(s) (use no_console_suspend to debug) [41370.793085] psmouse serio2: Failed to disable mouse on synaptics-pt/serio0 [41370.913133] sd 2:0:0:0: [sda] Synchronizing SCSI cache [41370.916455] sd 2:0:0:0: [sda] Stopping disk [41370.941636] e1000e: EEE TX LPI TIMER: 00000011 [41371.305541] ACPI: EC: interrupt blocked [41371.361464] ACPI: Preparing to enter system sleep state S3 [41371.368300] ACPI: EC: event blocked [41371.368303] ACPI: EC: EC stopped [41371.368304] PM: Saving platform NVS memory [41371.368311] Disabling non-boot CPUs ... [41371.368873] IRQ 128: no longer affine to CPU1 [41371.369886] smpboot: CPU 1 is now offline [41371.373073] smpboot: CPU 2 is now offline [41371.374510] IRQ 127: no longer affine to CPU3 [41371.374523] IRQ 130: no longer affine to CPU3 [41371.375535] smpboot: CPU 3 is now offline [41371.379964] ACPI: Low-level resume complete [41371.380216] ACPI: EC: EC started [41371.380220] PM: Restoring platform NVS memory [41371.391838] Enabling non-boot CPUs ... [41371.392002] x86: Booting SMP configuration: [41371.392006] smpboot: Booting Node 0 Processor 1 APIC 0x2 [41371.406252] CPU1 is up [41371.406377] smpboot: Booting Node 0 Processor 2 APIC 0x1 [41371.410765] CPU2 is up [41371.410889] smpboot: Booting Node 0 Processor 3 APIC 0x3 [41371.414610] CPU3 is up [41371.421232] ACPI: Waking up from system sleep state S3 [41371.513385] ACPI: EC: interrupt unblocked [41371.558916] ACPI: EC: event unblocked [41371.560550] sd 2:0:0:0: [sda] Starting disk [41371.584868] usb 2-3: Disable of device-initiated U1 failed. [41371.588729] usb 2-3: Disable of device-initiated U2 failed. [41371.781994] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [41371.872739] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41371.874408] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41371.874434] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41371.874451] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41371.874545] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41371.874984] ata3.00: supports DRM functions and may not be fully accessible [41371.879655] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41371.879684] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41371.879701] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41371.879794] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41371.880214] ata3.00: supports DRM functions and may not be fully accessible [41371.883189] ata3.00: configured for UDMA/133 [41371.893992] ata3.00: Enabling discard_zeroes_data [41372.299923] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [41372.332247] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [41372.469323] acpi LNXPOWER:02: Turning OFF [41372.469603] acpi LNXPOWER:01: Turning OFF [41372.470497] OOM killer enabled. [41372.470503] Restarting tasks ... done. [41372.505565] thermal thermal_zone3: failed to read out thermal zone (-61) [41372.580552] PM: suspend exit [41373.458782] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [41373.831814] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [41373.967283] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [41374.037081] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [41377.653414] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41377.660868] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41377.668916] wlp4s0: authenticated [41377.673605] wlp4s0: associate with c8:b3:73:41:8f:95 (try 1/3) [41377.676556] wlp4s0: RX AssocResp from c8:b3:73:41:8f:95 (capab=0x411 status=0 aid=7) [41377.680431] wlp4s0: associated [41389.229668] usb 1-4: new high-speed USB device number 31 using xhci_hcd [41389.379255] usb 1-4: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.00 [41389.379271] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [41389.379278] usb 1-4: Product: Cruzer Force [41389.379284] usb 1-4: Manufacturer: SanDisk [41389.379288] usb 1-4: SerialNumber: 4C530001011112114034 [41389.384846] usb-storage 1-4:1.0: USB Mass Storage device detected [41389.386570] scsi host4: usb-storage 1-4:1.0 [41390.390998] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6 [41390.391609] sd 4:0:0:0: Attached scsi generic sg2 type 0 [41390.391857] sd 4:0:0:0: [sdc] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB) [41390.393488] sd 4:0:0:0: [sdc] Write Protect is off [41390.393499] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00 [41390.393900] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [41390.426679] sdc: sdc1 [41390.428838] sd 4:0:0:0: [sdc] Attached SCSI removable disk [41402.701770] wlp4s0: deauthenticating from c8:b3:73:41:8f:95 by local choice (Reason: 3=DEAUTH_LEAVING) [41403.368617] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41403.376473] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41403.395085] wlp4s0: authenticated [41403.397469] wlp4s0: associate with c8:b3:73:41:8f:95 (try 1/3) [41403.419963] wlp4s0: RX AssocResp from c8:b3:73:41:8f:95 (capab=0x411 status=0 aid=7) [41403.433340] wlp4s0: associated [41427.702260] wlp4s0: deauthenticating from c8:b3:73:41:8f:95 by local choice (Reason: 3=DEAUTH_LEAVING) [41428.361317] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41428.368943] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41428.381196] wlp4s0: authenticated [41428.385758] wlp4s0: associate with c8:b3:73:41:8f:95 (try 1/3) [41428.458878] wlp4s0: associate with c8:b3:73:41:8f:95 (try 2/3) [41428.464731] wlp4s0: RX AssocResp from c8:b3:73:41:8f:95 (capab=0x411 status=0 aid=7) [41428.476325] wlp4s0: associated [41452.704001] wlp4s0: deauthenticating from c8:b3:73:41:8f:95 by local choice (Reason: 3=DEAUTH_LEAVING) [41453.257489] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41453.267534] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41453.274859] wlp4s0: authenticated [41453.275350] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41453.275364] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41453.278303] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41453.282674] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41453.289293] wlp4s0: associated [41457.714275] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [41463.291612] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [41463.905848] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41463.913812] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41464.022276] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41464.128743] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41464.230155] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41467.902862] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41467.911816] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41468.018106] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41468.124777] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41468.226288] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41478.736817] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41478.744585] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41478.850430] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41478.956715] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41479.062166] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41495.211522] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41495.220448] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41495.330514] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41495.437048] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41495.542344] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41504.213981] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41504.221404] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41504.326635] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41504.432615] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41504.534356] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41517.215042] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41517.224490] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41517.330525] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41517.437699] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41517.542541] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41530.577038] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41530.585757] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41530.690614] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41530.796830] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41530.902647] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41532.340225] usb 1-4: USB disconnect, device number 31 [41539.162998] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [41539.668602] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [41540.866994] PM: suspend entry (deep) [41540.871310] Filesystems sync: 0.004 seconds [41540.872531] Freezing user space processes ... (elapsed 0.002 seconds) done. [41540.874863] OOM killer disabled. [41540.874864] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41540.876210] printk: Suspending console(s) (use no_console_suspend to debug) [41541.118972] psmouse serio2: Failed to disable mouse on synaptics-pt/serio0 [41541.242813] sd 2:0:0:0: [sda] Synchronizing SCSI cache [41541.246146] sd 2:0:0:0: [sda] Stopping disk [41541.266413] e1000e: EEE TX LPI TIMER: 00000011 [41541.639897] ACPI: EC: interrupt blocked [41541.695409] ACPI: Preparing to enter system sleep state S3 [41541.702255] ACPI: EC: event blocked [41541.702257] ACPI: EC: EC stopped [41541.702258] PM: Saving platform NVS memory [41541.702266] Disabling non-boot CPUs ... [41541.703847] smpboot: CPU 1 is now offline [41541.707021] smpboot: CPU 2 is now offline [41541.709432] smpboot: CPU 3 is now offline [41541.713851] ACPI: Low-level resume complete [41541.714097] ACPI: EC: EC started [41541.714102] PM: Restoring platform NVS memory [41541.725631] Enabling non-boot CPUs ... [41541.725792] x86: Booting SMP configuration: [41541.725797] smpboot: Booting Node 0 Processor 1 APIC 0x2 [41541.740055] CPU1 is up [41541.740183] smpboot: Booting Node 0 Processor 2 APIC 0x1 [41541.744474] CPU2 is up [41541.744598] smpboot: Booting Node 0 Processor 3 APIC 0x3 [41541.748330] CPU3 is up [41541.754916] ACPI: Waking up from system sleep state S3 [41541.845537] ACPI: EC: interrupt unblocked [41541.892631] ACPI: EC: event unblocked [41541.894471] sd 2:0:0:0: [sda] Starting disk [41542.050121] usb 2-3: Disable of device-initiated U1 failed. [41542.053631] usb 2-3: Disable of device-initiated U2 failed. [41542.211594] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41542.213262] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41542.213292] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41542.213309] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41542.213488] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41542.213923] ata3.00: supports DRM functions and may not be fully accessible [41542.218587] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41542.218616] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41542.218633] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [41542.218756] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41542.219220] ata3.00: supports DRM functions and may not be fully accessible [41542.222094] ata3.00: configured for UDMA/133 [41542.236238] ata3.00: Enabling discard_zeroes_data [41542.247855] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [41542.626975] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [41542.658936] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [41542.796082] acpi LNXPOWER:02: Turning OFF [41542.796358] acpi LNXPOWER:01: Turning OFF [41542.797344] OOM killer enabled. [41542.797353] Restarting tasks ... done. [41542.856103] thermal thermal_zone3: failed to read out thermal zone (-61) [41542.916737] PM: suspend exit [41543.794338] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [41544.173475] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [41544.309837] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [41544.379320] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [41548.003576] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41548.012974] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41548.020572] wlp4s0: authenticated [41548.021079] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41548.021091] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41548.023243] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41548.026030] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41548.029807] wlp4s0: associated [41558.031735] wlp4s0: deauthenticating from 00:1e:e5:f5:e3:c9 by local choice (Reason: 3=DEAUTH_LEAVING) [41558.776046] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41558.785178] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41558.891341] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 2/3) [41558.997389] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 3/3) [41559.099250] wlp4s0: authentication with 00:1e:e5:f5:e3:c9 timed out [41560.762897] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41560.772321] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41560.777281] wlp4s0: authenticated [41560.777763] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41560.777775] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41560.780194] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41560.783293] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41560.786141] wlp4s0: associated [41564.764589] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [41574.596400] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41574.604440] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41574.611984] wlp4s0: authenticated [41574.612398] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41574.612410] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41574.615427] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41574.619160] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41574.621377] wlp4s0: associated [41578.600781] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [41589.151884] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41589.159665] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41589.164393] wlp4s0: authenticated [41589.164866] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41589.164879] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41589.167694] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41589.174554] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41589.176856] wlp4s0: associated [41593.157373] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [41598.753700] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41598.761309] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41598.764479] wlp4s0: authenticated [41598.764865] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41598.764875] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41598.767594] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41598.770332] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41598.772965] wlp4s0: associated [41602.752746] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [41613.391583] wlp4s0: authenticate with 00:1e:e5:f5:e3:c9 [41613.399326] wlp4s0: send auth to 00:1e:e5:f5:e3:c9 (try 1/3) [41613.404353] wlp4s0: authenticated [41613.404838] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [41613.404850] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [41613.409306] wlp4s0: associate with 00:1e:e5:f5:e3:c9 (try 1/3) [41613.411976] wlp4s0: RX AssocResp from 00:1e:e5:f5:e3:c9 (capab=0x411 status=0 aid=24) [41613.414163] wlp4s0: associated [41617.397207] wlp4s0: deauthenticated from 00:1e:e5:f5:e3:c9 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [41683.196054] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41683.204665] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41683.215300] wlp4s0: authenticated [41683.216314] wlp4s0: associate with c8:b3:73:41:8f:95 (try 1/3) [41683.355634] wlp4s0: associate with c8:b3:73:41:8f:95 (try 2/3) [41683.433280] wlp4s0: associate with c8:b3:73:41:8f:95 (try 3/3) [41683.533850] wlp4s0: association with c8:b3:73:41:8f:95 timed out [41734.568377] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41734.575427] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41734.622870] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [41734.726601] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [41734.798553] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [41978.265983] wlp4s0: authenticate with c8:b3:73:41:8f:95 [41978.274462] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [41978.326216] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [41978.378009] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [41978.435046] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [42156.222075] wlp4s0: authenticate with c8:b3:73:41:8f:95 [42156.229077] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [42156.287242] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [42156.356892] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [42156.432095] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [42482.297195] wlp4s0: authenticate with c8:b3:73:41:8f:95 [42482.306399] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [42482.384753] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [42482.427500] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [42482.473473] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [42493.014595] wlp4s0: authenticate with c8:b3:73:41:8f:95 [42493.021771] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [42493.103763] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [42493.178805] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [42493.219176] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [42851.466758] wlp4s0: authenticate with c8:b3:73:41:8f:95 [42851.476404] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 1/3) [42851.556790] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 2/3) [42851.622249] wlp4s0: send auth to c8:b3:73:41:8f:95 (try 3/3) [42851.686840] wlp4s0: authentication with c8:b3:73:41:8f:95 timed out [42856.341783] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [42856.845801] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [42858.140263] PM: suspend entry (deep) [42858.144946] Filesystems sync: 0.004 seconds [42858.146572] Freezing user space processes ... (elapsed 0.002 seconds) done. [42858.149059] OOM killer disabled. [42858.149061] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [42858.150389] printk: Suspending console(s) (use no_console_suspend to debug) [42858.395237] psmouse serio2: Failed to disable mouse on synaptics-pt/serio0 [42858.519139] sd 2:0:0:0: [sda] Synchronizing SCSI cache [42858.522570] sd 2:0:0:0: [sda] Stopping disk [42858.541107] e1000e: EEE TX LPI TIMER: 00000011 [42858.912124] ACPI: EC: interrupt blocked [42858.967592] ACPI: Preparing to enter system sleep state S3 [42858.974742] ACPI: EC: event blocked [42858.974745] ACPI: EC: EC stopped [42858.974746] PM: Saving platform NVS memory [42858.974754] Disabling non-boot CPUs ... [42858.975368] IRQ 128: no longer affine to CPU1 [42858.976968] smpboot: CPU 1 is now offline [42858.979650] smpboot: CPU 2 is now offline [42858.981114] IRQ 130: no longer affine to CPU3 [42858.982133] smpboot: CPU 3 is now offline [42858.985502] ACPI: Low-level resume complete [42858.985601] ACPI: EC: EC started [42858.985602] PM: Restoring platform NVS memory [42858.987487] Enabling non-boot CPUs ... [42858.987525] x86: Booting SMP configuration: [42858.987525] smpboot: Booting Node 0 Processor 1 APIC 0x2 [42858.989331] CPU1 is up [42858.989356] smpboot: Booting Node 0 Processor 2 APIC 0x1 [42858.990017] CPU2 is up [42858.990041] smpboot: Booting Node 0 Processor 3 APIC 0x3 [42858.990610] CPU3 is up [42858.991863] ACPI: Waking up from system sleep state S3 [42859.014296] ACPI: EC: interrupt unblocked [42859.055907] ACPI: EC: event unblocked [42859.057624] sd 2:0:0:0: [sda] Starting disk [42859.188559] usb 2-3: Disable of device-initiated U1 failed. [42859.192072] usb 2-3: Disable of device-initiated U2 failed. [42859.372460] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [42859.372883] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [42859.372887] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [42859.372889] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [42859.372944] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [42859.373218] ata3.00: supports DRM functions and may not be fully accessible [42859.376241] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [42859.376245] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [42859.376246] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [42859.376304] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [42859.376586] ata3.00: supports DRM functions and may not be fully accessible [42859.378910] ata3.00: configured for UDMA/133 [42859.386120] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [42859.389290] ata3.00: Enabling discard_zeroes_data [42859.795181] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4690] [42859.828833] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [42859.946792] acpi LNXPOWER:02: Turning OFF [42859.946828] acpi LNXPOWER:01: Turning OFF [42859.947123] OOM killer enabled. [42859.947124] Restarting tasks ... done. [42859.962265] thermal thermal_zone3: failed to read out thermal zone (-61) [42860.012476] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [42860.016539] PM: suspend exit [42860.017711] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [42860.081672] usb 1-1: new high-speed USB device number 32 using xhci_hcd [42860.236412] usb 1-1: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.40 [42860.236416] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42860.236417] usb 1-1: Product: Lenovo ThinkPad Dock [42860.236419] usb 1-1: Manufacturer: LENOVO [42860.237160] hub 1-1:1.0: USB hub found [42860.237504] hub 1-1:1.0: 4 ports detected [42860.359730] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [42860.366235] usb 2-1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [42860.514374] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [42860.583316] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [42860.622875] usb 2-1: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.41 [42860.622887] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42860.622893] usb 2-1: Product: Lenovo ThinkPad Dock [42860.622897] usb 2-1: Manufacturer: LENOVO [42860.628694] hub 2-1:1.0: USB hub found [42860.628949] hub 2-1:1.0: 4 ports detected [42860.753738] usb 1-1.1: new low-speed USB device number 33 using xhci_hcd [42860.914992] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [42860.915006] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42860.915013] usb 1-1.1: Product: USB Optical Mouse [42860.915018] usb 1-1.1: Manufacturer: Logitech [42860.921056] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C077.0007/input/input25 [42860.921565] hid-generic 0003:046D:C077.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1.1/input0 [42861.014032] usb 1-1.2: new high-speed USB device number 34 using xhci_hcd [42861.126408] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [42861.126425] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [42861.127912] hub 1-1.2:1.0: USB hub found [42861.127956] hub 1-1.2:1.0: 3 ports detected [42861.161141] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [42861.226011] usb 1-1.4: new high-speed USB device number 35 using xhci_hcd [42861.338360] usb 1-1.4: New USB device found, idVendor=17ef, idProduct=100f, bcdDevice= 0.01 [42861.338374] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [42861.338381] usb 1-1.4: Product: Lenovo ThinkPad Dock [42861.338385] usb 1-1.4: Manufacturer: Lenovo [42861.338389] usb 1-1.4: SerialNumber: Rev1.2 [42861.339611] hub 1-1.4:1.0: USB hub found [42861.339656] hub 1-1.4:1.0: 3 ports detected [42861.417703] usb 1-1.2.1: new high-speed USB device number 36 using xhci_hcd [42861.518423] usb 1-1.2.1: New USB device found, idVendor=0424, idProduct=2640, bcdDevice= 0.00 [42861.518430] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [42861.519906] hub 1-1.2.1:1.0: USB hub found [42861.520001] hub 1-1.2.1:1.0: 3 ports detected [42861.630034] usb 1-1.4.1: new low-speed USB device number 37 using xhci_hcd [42861.737167] usb 1-1.4.1: New USB device found, idVendor=17f6, idProduct=0709, bcdDevice= 2.15 [42861.737182] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42861.737188] usb 1-1.4.1: Product: Endura Keyboard [42861.737194] usb 1-1.4.1: Manufacturer: Unicomp [42861.747343] input: Unicomp Endura Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:17F6:0709.0008/input/input26 [42861.806685] hid-generic 0003:17F6:0709.0008: input,hidraw1: USB HID v1.10 Keyboard [Unicomp Endura Keyboard ] on usb-0000:00:14.0-1.4.1/input0 [42861.810038] usb 1-1.2.1.1: new high-speed USB device number 38 using xhci_hcd [42861.953562] usb 1-1.2.1.1: New USB device found, idVendor=0424, idProduct=4060, bcdDevice= 1.82 [42861.953566] usb 1-1.2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [42861.953568] usb 1-1.2.1.1: Product: Ultra Fast Media Reader [42861.953570] usb 1-1.2.1.1: Manufacturer: Generic [42861.953571] usb 1-1.2.1.1: SerialNumber: F120A6013FBB [42861.955797] usb-storage 1-1.2.1.1:1.0: USB Mass Storage device detected [42861.955949] scsi host4: usb-storage 1-1.2.1.1:1.0 [42861.990017] usb 1-1.4.2: new full-speed USB device number 39 using xhci_hcd [42862.095315] usb 1-1.4.2: New USB device found, idVendor=08bb, idProduct=2902, bcdDevice= 1.00 [42862.095330] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42862.095336] usb 1-1.4.2: Product: USB Audio CODEC [42862.095341] usb 1-1.4.2: Manufacturer: Burr-Brown from TI [42862.141124] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.3/0003:08BB:2902.0009/input/input27 [42862.170032] usb 1-1.2.1.3: new full-speed USB device number 40 using xhci_hcd [42862.198304] hid-generic 0003:08BB:2902.0009: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-1.4.2/input3 [42862.270745] usb 1-1.2.1.3: device descriptor read/all, error -32 [42862.349768] usb 1-1.4.3: new high-speed USB device number 41 using xhci_hcd [42862.452923] usb 1-1.4.3: New USB device found, idVendor=04a9, idProduct=1912, bcdDevice= 1.00 [42862.452940] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [42862.452947] usb 1-1.4.3: Product: LiDE 400 [42862.452953] usb 1-1.4.3: Manufacturer: Canon [42862.452958] usb 1-1.4.3: SerialNumber: 45EA12 [42862.738051] usb 1-1.2.1.3: new full-speed USB device number 42 using xhci_hcd [42862.840707] usb 1-1.2.1.3: New USB device found, idVendor=091e, idProduct=0003, bcdDevice= 0.01 [42862.840724] usb 1-1.2.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [42862.996999] scsi 4:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [42862.997261] sd 4:0:0:0: Attached scsi generic sg2 type 0 [42863.000544] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [42863.000625] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [42863.030993] sd 4:0:0:0: [sdc] Attached SCSI removable disk [42864.268458] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [42864.277745] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [42864.285529] wlp4s0: authenticated [42864.286033] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [42864.296658] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=2) [42864.306339] wlp4s0: associated [42864.492933] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [42866.019917] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [42866.022956] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [42866.050850] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [42866.054043] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [42876.020755] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [42876.023876] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [42876.052328] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 2: DPCD read on addr 0x4b0 for 1 bytes NAKed [42876.055787] [drm:drm_dp_mst_dpcd_read [drm_kms_helper]] *ERROR* mstb 000000000f1ba5a9 port 3: DPCD read on addr 0x4b0 for 1 bytes NAKed [44183.438159] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [44184.661033] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [44184.672269] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [44184.682039] wlp4s0: authenticated [44184.685884] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [44184.716508] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [44184.721354] wlp4s0: associated [44769.475987] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [44770.617972] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [44770.625743] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [44770.636636] wlp4s0: authenticated [44770.639208] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [44770.646130] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [44770.650001] wlp4s0: associated [48371.498327] wlp4s0: disassociated from 24:65:11:a6:d5:e3 (Reason: 2=PREV_AUTH_NOT_VALID) [48372.098750] wlp4s0: authenticate with 24:65:11:a6:d5:e3 [48372.109998] wlp4s0: send auth to 24:65:11:a6:d5:e3 (try 1/3) [48372.119199] wlp4s0: authenticated [48372.120933] wlp4s0: associate with 24:65:11:a6:d5:e3 (try 1/3) [48372.128707] wlp4s0: RX AssocResp from 24:65:11:a6:d5:e3 (capab=0x431 status=0 aid=1) [48372.132593] wlp4s0: associated