[ 0.000000] Linux version 4.15.0-112-generic (buildd@lcy01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)) #113~16.04.1-Ubuntu SMP Fri Jul 10 04:37:08 UTC 2020 (Ubuntu 4.15.0-112.113~16.04.1-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-112-generic root=UUID=24df6f24-a21f-4338-9004-711d0d53c422 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000669befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000669bf000-0x0000000066abefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000066abf000-0x0000000066bbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000066bbf000-0x0000000066bf4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000066bf5000-0x0000000066bfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000066c00000-0x000000007effffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dm1 Notebook PC/3387, BIOS F.13 12/13/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x66c00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF8000000 write-back [ 0.000000] 3 base 066BBD000 mask FFFFFF000 uncachable [ 0.000000] 4 base 067000000 mask FFF000000 uncachable [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x4d993000, 0x4d993fff] PGTABLE [ 0.000000] BRK [0x4d994000, 0x4d994fff] PGTABLE [ 0.000000] BRK [0x4d995000, 0x4d995fff] PGTABLE [ 0.000000] BRK [0x4d996000, 0x4d996fff] PGTABLE [ 0.000000] BRK [0x4d997000, 0x4d997fff] PGTABLE [ 0.000000] BRK [0x4d998000, 0x4d998fff] PGTABLE [ 0.000000] BRK [0x4d999000, 0x4d999fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3155c000-0x34aa5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x0000000066BF4120 00007C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000066BF3000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x0000000066BDF000 00F4C8 (v01 HP INSYDE F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x0000000066B86000 000040 [ 0.000000] ACPI: FACS 0x0000000066B86000 000040 [ 0.000000] ACPI: HPET 0x0000000066BF2000 000038 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x0000000066BF1000 000084 (v02 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x0000000066BF0000 00003C (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x0000000066BEF000 0000A5 (v32 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x0000000066BDE000 000028 (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x0000000066BDD000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000) [ 0.000000] ACPI: WDRT 0x0000000066BDC000 000047 (v01 HP INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x0000000066BDB000 0001AC (v01 HP INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000066BDA000 0003DE (v01 HP INSYDE 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x0000000066BD8000 00168E (v02 HP INSYDE 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000066bfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x66994000-0x669befff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000066bfffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000669befff] [ 0.000000] node 0: [mem 0x0000000066bf5000-0x0000000066bfffff] [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000066bfffff] [ 0.000000] On node 0 totalpages: 420200 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6512 pages used for memmap [ 0.000000] DMA32 zone: 416202 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x669bf000-0x66abefff] [ 0.000000] PM: Registered nosave memory: [mem 0x66abf000-0x66bbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x66bbf000-0x66bf4fff] [ 0.000000] e820: [mem 0x7f000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51e with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 413603 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-112-generic root=UUID=24df6f24-a21f-4338-9004-711d0d53c422 ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1570296K/1680800K available (12300K kernel code, 2480K rwdata, 4220K rodata, 2432K init, 2720K bss, 110504K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39359 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1297.296 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.59 BogoMIPS (lpj=5189184) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.028662] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.028666] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.028671] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.028676] Spectre V2 : Mitigation: Full AMD retpoline [ 0.028678] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028680] Speculative Store Bypass: Vulnerable [ 0.029091] Freeing SMP alternatives memory: 36K [ 0.060110] APIC calibration not consistent with PM-Timer: 1023ms instead of 100ms [ 0.060115] APIC delta adjusted to PM-Timer: 1247341 (12769525) [ 0.060130] smpboot: CPU0: AMD E-300 APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) [ 0.060436] Performance Events: AMD PMU driver. [ 0.060448] ... version: 0 [ 0.060450] ... bit width: 48 [ 0.060451] ... generic registers: 4 [ 0.060453] ... value mask: 0000ffffffffffff [ 0.060455] ... max period: 00007fffffffffff [ 0.060456] ... fixed-purpose events: 0 [ 0.060458] ... event mask: 000000000000000f [ 0.060592] Hierarchical SRCU implementation. [ 0.062555] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.062614] smp: Bringing up secondary CPUs ... [ 0.063018] x86: Booting SMP configuration: [ 0.063022] .... node #0, CPUs: #1 [ 0.004000] do_IRQ: 1.55 No irq handler for vector [ 0.072179] smp: Brought up 1 node, 2 CPUs [ 0.072179] smpboot: Max logical packages: 2 [ 0.072179] smpboot: Total of 2 processors activated (5189.18 BogoMIPS) [ 0.072810] devtmpfs: initialized [ 0.072810] x86/mm: Memory block size: 128MB [ 0.072867] evm: security.selinux [ 0.072869] evm: security.SMACK64 [ 0.072870] evm: security.SMACK64EXEC [ 0.072871] evm: security.SMACK64TRANSMUTE [ 0.072873] evm: security.SMACK64MMAP [ 0.072874] evm: security.apparmor [ 0.072876] evm: security.ima [ 0.072877] evm: security.capability [ 0.073013] PM: Registering ACPI NVS region [mem 0x66abf000-0x66bbefff] (1048576 bytes) [ 0.073013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.073013] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.076113] pinctrl core: initialized pinctrl subsystem [ 0.076454] RTC time: 18:39:55, date: 03/07/21 [ 0.076760] NET: Registered protocol family 16 [ 0.077023] audit: initializing netlink subsys (disabled) [ 0.077059] audit: type=2000 audit(1615142394.076:1): state=initialized audit_enabled=0 res=1 [ 0.077059] cpuidle: using governor ladder [ 0.077059] cpuidle: using governor menu [ 0.077059] Simple Boot Flag at 0x44 set to 0x1 [ 0.077059] ACPI: bus type PCI registered [ 0.077059] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.077059] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.077059] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.077059] PCI: Using configuration type 1 for base access [ 0.077059] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.077059] mtrr: probably your BIOS does not setup all CPUs. [ 0.077059] mtrr: corrected configuration. [ 0.082565] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.082565] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.084308] ACPI: Added _OSI(Module Device) [ 0.084312] ACPI: Added _OSI(Processor Device) [ 0.084314] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.084316] ACPI: Added _OSI(Processor Aggregator Device) [ 0.084319] ACPI: Added _OSI(Linux-Dell-Video) [ 0.084322] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.084324] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.084879] ACPI: Executed 1 blocks of module-level executable AML code [ 0.101818] ACPI: EC: EC started [ 0.101822] ACPI: EC: interrupt blocked [ 0.164124] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.164131] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x5, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.164135] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.164137] ACPI: Interpreter enabled [ 0.164201] ACPI: (supports S0 S3 S4 S5) [ 0.164205] ACPI: Using IOAPIC for interrupt routing [ 0.164960] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.165867] ACPI: GPE 0x05 active on init [ 0.165917] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.398177] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.398196] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.399177] acpi PNP0A08:00: _OSC: platform does not support [PME] [ 0.400833] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.400873] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.401233] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) [ 0.402032] PCI host bridge to bus 0000:00 [ 0.402039] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.402042] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.402046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.402050] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.402053] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.402057] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.402061] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.402064] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.402067] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.402071] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.402074] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.402078] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.402081] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.402085] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.402088] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xf7ffffff window] [ 0.402092] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.402095] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window] [ 0.402099] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.402119] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.402435] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 [ 0.402460] pci 0000:00:01.0: reg 0x10: [mem 0x80000000-0x8fffffff pref] [ 0.402471] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff] [ 0.402481] pci 0000:00:01.0: reg 0x18: [mem 0x90300000-0x9033ffff] [ 0.402515] pci 0000:00:01.0: enabling Extended Tags [ 0.402568] pci 0000:00:01.0: supports D1 D2 [ 0.402834] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 [ 0.402856] pci 0000:00:01.1: reg 0x10: [mem 0x90344000-0x90347fff] [ 0.402902] pci 0000:00:01.1: enabling Extended Tags [ 0.402952] pci 0000:00:01.1: supports D1 D2 [ 0.403252] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 [ 0.403302] pci 0000:00:04.0: enabling Extended Tags [ 0.403367] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.403687] pci 0000:00:11.0: [1002:4394] type 00 class 0x010601 [ 0.403718] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f] [ 0.403732] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127] [ 0.403747] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117] [ 0.403761] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123] [ 0.403774] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f] [ 0.403789] pci 0000:00:11.0: reg 0x24: [mem 0x9034e000-0x9034e3ff] [ 0.404197] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.404225] pci 0000:00:12.0: reg 0x10: [mem 0x9034d000-0x9034dfff] [ 0.404640] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.405719] pci 0000:00:12.2: reg 0x10: [mem 0x9034c000-0x9034c0ff] [ 0.408546] pci 0000:00:12.2: supports D1 D2 [ 0.408550] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.408826] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.408854] pci 0000:00:13.0: reg 0x10: [mem 0x9034b000-0x9034bfff] [ 0.409277] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.410276] pci 0000:00:13.2: reg 0x10: [mem 0x9034a000-0x9034a0ff] [ 0.413291] pci 0000:00:13.2: supports D1 D2 [ 0.413294] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.413638] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.414065] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.414104] pci 0000:00:14.2: reg 0x10: [mem 0x90340000-0x90343fff 64bit] [ 0.414206] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.414479] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.414838] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.415175] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.415237] pci 0000:00:15.0: enabling Extended Tags [ 0.415315] pci 0000:00:15.0: supports D1 D2 [ 0.415667] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.415728] pci 0000:00:15.1: enabling Extended Tags [ 0.416012] pci 0000:00:15.1: supports D1 D2 [ 0.416304] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.416332] pci 0000:00:16.0: reg 0x10: [mem 0x90349000-0x90349fff] [ 0.416683] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.417750] pci 0000:00:16.2: reg 0x10: [mem 0x90348000-0x903480ff] [ 0.420546] pci 0000:00:16.2: supports D1 D2 [ 0.420550] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.420826] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.421115] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.421395] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.421674] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.421966] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.422244] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.422526] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.422815] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.423359] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.423576] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.423591] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.423595] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.423599] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.423603] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) [ 0.423607] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) [ 0.423610] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) [ 0.423614] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.423618] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.423622] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.423625] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.423629] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.423633] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.423636] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) [ 0.423640] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) [ 0.423644] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xf7ffffff window] (subtractive decode) [ 0.423648] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode) [ 0.423651] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode) [ 0.424101] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000 [ 0.424157] pci 0000:03:00.0: reg 0x10: [mem 0x90200000-0x90203fff 64bit] [ 0.424247] pci 0000:03:00.0: enabling Extended Tags [ 0.424371] pci 0000:03:00.0: supports D1 D2 [ 0.436163] pci 0000:00:15.0: PCI bridge to [bus 03-06] [ 0.436178] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] [ 0.436186] pci 0000:00:15.0: bridge window [mem 0x90200000-0x902fffff] [ 0.436196] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.436498] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.436545] pci 0000:07:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.436586] pci 0000:07:00.0: reg 0x18: [mem 0x90104000-0x90104fff 64bit pref] [ 0.436613] pci 0000:07:00.0: reg 0x20: [mem 0x90100000-0x90103fff 64bit pref] [ 0.436769] pci 0000:07:00.0: supports D1 D2 [ 0.436773] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448160] pci 0000:00:15.1: PCI bridge to [bus 07] [ 0.448176] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.448190] pci 0000:00:15.1: bridge window [mem 0x90100000-0x901fffff 64bit pref] [ 0.451526] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.452122] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.452662] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.453128] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.453531] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.453873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.454199] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.454522] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.660834] ACPI Warning: GPE type mismatch (level/edge) (20170831/evxface-826) [ 0.660846] ACPI: EC: interrupt unblocked [ 0.660856] ACPI: EC: event unblocked [ 0.660868] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x5, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.660872] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.661576] SCSI subsystem initialized [ 0.664000] libata version 3.00 loaded. [ 0.664063] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.664068] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.664087] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.664090] vgaarb: loaded [ 0.664197] ACPI: bus type USB registered [ 0.664255] usbcore: registered new interface driver usbfs [ 0.664279] usbcore: registered new interface driver hub [ 0.664351] usbcore: registered new device driver usb [ 0.664466] EDAC MC: Ver: 3.0.0 [ 0.664522] resource sanity check: requesting [mem 0x000e3fc0-0x000e4499], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window] [ 0.664532] caller memremap+0x6c/0x170 mapping multiple BARs [ 0.664610] PCI: Using ACPI for IRQ routing [ 0.668423] PCI: pci_cache_line_size set to 64 bytes [ 0.668547] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.668552] e820: reserve RAM buffer [mem 0x669bf000-0x67ffffff] [ 0.668554] e820: reserve RAM buffer [mem 0x66c00000-0x67ffffff] [ 0.668842] NetLabel: Initializing [ 0.668845] NetLabel: domain hash size = 128 [ 0.668846] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.668894] NetLabel: unlabeled traffic allowed by default [ 0.668949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.668949] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.671344] amd_nb: x86/cpu/AMD: CPU erratum 688 worked around [ 0.672019] clocksource: Switched to clocksource hpet [ 0.712275] VFS: Disk quotas dquot_6.6.0 [ 0.712331] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.712702] AppArmor: AppArmor Filesystem Enabled [ 0.712809] pnp: PnP ACPI init [ 0.713505] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.713511] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.713531] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.714264] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.714405] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.714528] pnp 00:03: Plug and Play ACPI device, IDs SYN1e50 PNP0f13 (active) [ 0.714719] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.714725] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.714729] system 00:04: [io 0x04d6] has been reserved [ 0.714733] system 00:04: [io 0x0680-0x06ff] has been reserved [ 0.714738] system 00:04: [io 0x077a] has been reserved [ 0.714742] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.714746] system 00:04: [io 0x0c14] has been reserved [ 0.714750] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.714754] system 00:04: [io 0x0c6c] has been reserved [ 0.714758] system 00:04: [io 0x0c6f] has been reserved [ 0.714763] system 00:04: [io 0x0cd0-0x0cdb] could not be reserved [ 0.714768] system 00:04: [io 0x0380-0x0387] has been reserved [ 0.714784] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.715161] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.715167] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved [ 0.715183] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.925574] pnp: PnP ACPI: found 6 devices [ 0.944580] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.944623] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.944631] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.944637] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.944766] pci 0000:00:04.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff] [ 0.944799] pci 0000:00:04.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.944807] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.944815] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.944821] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] [ 0.944829] pci 0000:00:04.0: bridge window [mem 0x7f000000-0x7f1fffff] [ 0.944835] pci 0000:00:04.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.944845] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.944896] pci 0000:00:15.0: PCI bridge to [bus 03-06] [ 0.944901] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] [ 0.944909] pci 0000:00:15.0: bridge window [mem 0x90200000-0x902fffff] [ 0.944915] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.944925] pci 0000:00:15.1: PCI bridge to [bus 07] [ 0.944930] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.944941] pci 0000:00:15.1: bridge window [mem 0x90100000-0x901fffff 64bit pref] [ 0.944956] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.944960] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.944964] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.944968] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.944972] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.944975] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.944979] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.944983] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.944987] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.944990] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.944994] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.944998] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.945001] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.945005] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.945009] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff window] [ 0.945013] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window] [ 0.945016] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window] [ 0.945020] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.945024] pci_bus 0000:01: resource 1 [mem 0x7f000000-0x7f1fffff] [ 0.945028] pci_bus 0000:01: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.945033] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.945036] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.945040] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.945044] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.945048] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.945052] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.945056] pci_bus 0000:02: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.945060] pci_bus 0000:02: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.945064] pci_bus 0000:02: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.945068] pci_bus 0000:02: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.945071] pci_bus 0000:02: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.945075] pci_bus 0000:02: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.945079] pci_bus 0000:02: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.945083] pci_bus 0000:02: resource 17 [mem 0x000ec000-0x000effff window] [ 0.945087] pci_bus 0000:02: resource 18 [mem 0x7f000000-0xf7ffffff window] [ 0.945091] pci_bus 0000:02: resource 19 [mem 0xfc000000-0xfed3ffff window] [ 0.945095] pci_bus 0000:02: resource 20 [mem 0xfed45000-0xffffffff window] [ 0.945099] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.945103] pci_bus 0000:03: resource 1 [mem 0x90200000-0x902fffff] [ 0.945106] pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.945110] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.945114] pci_bus 0000:07: resource 2 [mem 0x90100000-0x901fffff 64bit pref] [ 0.945517] NET: Registered protocol family 2 [ 0.945942] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.946064] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.946219] TCP: Hash tables configured (established 16384 bind 16384) [ 0.946391] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.946429] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.946616] NET: Registered protocol family 1 [ 0.946663] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.760901] PCI: CLS 64 bytes, default 64 [ 1.761058] Unpacking initramfs... [ 4.001597] Freeing initrd memory: 54568K [ 4.001953] LVT offset 0 assigned for vector 0x400 [ 4.002254] perf: AMD IBS detected (0x000000ff) [ 4.002472] Scanning for low memory corruption every 60 seconds [ 4.004701] Initialise system trusted keyrings [ 4.004728] Key type blacklist registered [ 4.005238] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 4.009682] zbud: loaded [ 4.011959] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.013095] fuse init (API version 7.26) [ 4.022940] Key type asymmetric registered [ 4.022946] Asymmetric key parser 'x509' registered [ 4.023119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 4.023361] io scheduler noop registered [ 4.023365] io scheduler deadline registered [ 4.023531] io scheduler cfq registered (default) [ 4.025421] pciehp 0000:00:04.0:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+ [ 4.025762] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 4.025765] vesafb: scrolling: redraw [ 4.025769] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.025808] vesafb: framebuffer at 0x80000000, mapped to 0x (ptrval), using 3072k, total 3072k [ 4.026378] Console: switching to colour frame buffer device 128x48 [ 4.026435] fb0: VESA VGA frame buffer device [ 4.088072] ACPI: AC Adapter [ACAD] (on-line) [ 4.088269] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 4.088365] ACPI: Power Button [PWRB] [ 4.088546] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 4.088638] ACPI: Lid Switch [LID] [ 4.088759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.089128] ACPI: Power Button [PWRF] [ 4.093210] [Firmware Bug]: Invalid critical threshold (0) [ 4.097361] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.098917] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.098924] ACPI: Thermal Zone [THRM] (55 C) [ 4.099467] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.112879] Linux agpgart interface v0.103 [ 4.121092] loop: module loaded [ 4.121713] libphy: Fixed MDIO Bus: probed [ 4.121716] tun: Universal TUN/TAP device driver, 1.6 [ 4.122046] PPP generic driver version 2.4.2 [ 4.122338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.122359] ehci-pci: EHCI PCI platform driver [ 4.122891] QUIRK: Enable AMD PLL fix [ 4.123020] ehci-pci 0000:00:12.2: EHCI Host Controller [ 4.123037] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 4.123049] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.123135] ehci-pci 0000:00:12.2: debug port 1 [ 4.123228] ehci-pci 0000:00:12.2: irq 17, io mem 0x9034c000 [ 4.136423] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 4.136601] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.136606] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.136610] usb usb1: Product: EHCI Host Controller [ 4.136613] usb usb1: Manufacturer: Linux 4.15.0-112-generic ehci_hcd [ 4.136616] usb usb1: SerialNumber: 0000:00:12.2 [ 4.137394] hub 1-0:1.0: USB hub found [ 4.137423] hub 1-0:1.0: 5 ports detected [ 4.138551] ehci-pci 0000:00:13.2: EHCI Host Controller [ 4.138568] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 4.138580] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.138665] ehci-pci 0000:00:13.2: debug port 1 [ 4.138729] ehci-pci 0000:00:13.2: irq 17, io mem 0x9034a000 [ 4.152423] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 4.152608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.152613] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.152617] usb usb2: Product: EHCI Host Controller [ 4.152620] usb usb2: Manufacturer: Linux 4.15.0-112-generic ehci_hcd [ 4.152623] usb usb2: SerialNumber: 0000:00:13.2 [ 4.153333] hub 2-0:1.0: USB hub found [ 4.153363] hub 2-0:1.0: 5 ports detected [ 4.154439] ehci-pci 0000:00:16.2: EHCI Host Controller [ 4.154457] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 4.154469] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.154554] ehci-pci 0000:00:16.2: debug port 1 [ 4.154618] ehci-pci 0000:00:16.2: irq 17, io mem 0x90348000 [ 4.168383] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 4.168598] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.168604] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.168607] usb usb3: Product: EHCI Host Controller [ 4.168611] usb usb3: Manufacturer: Linux 4.15.0-112-generic ehci_hcd [ 4.168614] usb usb3: SerialNumber: 0000:00:16.2 [ 4.169275] hub 3-0:1.0: USB hub found [ 4.169306] hub 3-0:1.0: 4 ports detected [ 4.170013] ehci-platform: EHCI generic platform driver [ 4.170065] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.170083] ohci-pci: OHCI PCI platform driver [ 4.170598] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 4.170615] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 4.170697] ohci-pci 0000:00:12.0: irq 18, io mem 0x9034d000 [ 4.232607] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.232614] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.232618] usb usb4: Product: OHCI PCI host controller [ 4.232622] usb usb4: Manufacturer: Linux 4.15.0-112-generic ohci_hcd [ 4.232625] usb usb4: SerialNumber: 0000:00:12.0 [ 4.233357] hub 4-0:1.0: USB hub found [ 4.233458] hub 4-0:1.0: 5 ports detected [ 4.234460] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 4.234478] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 4.234540] ohci-pci 0000:00:13.0: irq 18, io mem 0x9034b000 [ 4.296607] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.296614] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.296618] usb usb5: Product: OHCI PCI host controller [ 4.296622] usb usb5: Manufacturer: Linux 4.15.0-112-generic ohci_hcd [ 4.296625] usb usb5: SerialNumber: 0000:00:13.0 [ 4.297357] hub 5-0:1.0: USB hub found [ 4.297459] hub 5-0:1.0: 5 ports detected [ 4.298500] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 4.298519] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6 [ 4.298658] ohci-pci 0000:00:16.0: irq 18, io mem 0x90349000 [ 4.317809] ACPI: Battery Slot [BAT0] (battery present) [ 4.360550] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.360557] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.360561] usb usb6: Product: OHCI PCI host controller [ 4.360565] usb usb6: Manufacturer: Linux 4.15.0-112-generic ohci_hcd [ 4.360568] usb usb6: SerialNumber: 0000:00:16.0 [ 4.361329] hub 6-0:1.0: USB hub found [ 4.361430] hub 6-0:1.0: 4 ports detected [ 4.362144] ohci-platform: OHCI generic platform driver [ 4.362184] uhci_hcd: USB Universal Host Controller Interface driver [ 4.362464] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.366724] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.366741] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.367737] mousedev: PS/2 mouse device common for all mice [ 4.369602] rtc_cmos 00:01: RTC can wake from S4 [ 4.370130] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 4.370195] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 4.370247] i2c /dev entries driver [ 4.370437] device-mapper: uevent: version 1.0.3 [ 4.370857] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 4.371036] ledtrig-cpu: registered to indicate activity on CPUs [ 4.372447] NET: Registered protocol family 10 [ 4.389595] Segment Routing with IPv6 [ 4.389660] NET: Registered protocol family 17 [ 4.389844] Key type dns_resolver registered [ 4.390719] mce: Using 6 MCE banks [ 4.390762] RAS: Correctable Errors collector initialized. [ 4.390771] microcode: microcode updated early to new patch_level=0x05000119 [ 4.390883] microcode: CPU0: patch_level=0x05000119 [ 4.390977] microcode: CPU1: patch_level=0x05000119 [ 4.391300] microcode: Microcode Update Driver: v2.2. [ 4.391371] sched_clock: Marking stable (4391250560, 0)->(5374624191, -983373631) [ 4.392942] registered taskstats version 1 [ 4.392971] Loading compiled-in X.509 certificates [ 4.404791] Loaded X.509 cert 'Build time autogenerated kernel key: 0369c56c7146cf506bb25ad446f2635f298f8fa6' [ 4.404877] zswap: loaded using pool lzo/zbud [ 4.422363] Key type big_key registered [ 4.422377] Key type trusted registered [ 4.431107] Key type encrypted registered [ 4.431127] AppArmor: AppArmor sha1 policy hashing enabled [ 4.431136] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.431154] ima: Allocated hash algorithm: sha1 [ 4.431207] evm: HMAC attrs: 0x1 [ 4.432377] Magic number: 13:548:695 [ 4.432498] pci 0000:00:00.0: hash matches [ 4.432703] rtc_cmos 00:01: setting system clock to 2021-03-07 18:39:59 UTC (1615142399) [ 4.433088] acpi_cpufreq: overriding BIOS provided _PSD data [ 4.433373] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.433375] EDD information not available. [ 4.443132] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.443380] Freeing unused kernel image memory: 2432K [ 4.456398] Write protecting the kernel read-only data: 20480k [ 4.459105] Freeing unused kernel image memory: 2008K [ 4.460996] Freeing unused kernel image memory: 1924K [ 4.490868] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.491187] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.540273] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.540590] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.540646] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.651700] usb 2-1: New USB device found, idVendor=0930, idProduct=6545 [ 4.651708] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.651712] usb 2-1: Product: DT 100 G2 [ 4.651716] usb 2-1: Manufacturer: Kingston [ 4.651719] usb 2-1: SerialNumber: 001CC0EC349BEB20F6020148 [ 4.768117] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 4.812152] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4.814044] scsi host0: usb-storage 2-1:1.0 [ 4.814316] usbcore: registered new interface driver usb-storage [ 4.819103] usbcore: registered new interface driver uas [ 4.879464] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4.896235] acpi device:00: registered as cooling_device2 [ 4.896438] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 4.961217] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 4.974650] ahci 0000:00:11.0: version 3.0 [ 4.975173] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 4.975180] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 4.975450] usb 6-1: New USB device found, idVendor=0a5c, idProduct=21e3 [ 4.975456] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.975459] usb 6-1: Product: BCM20702A0 [ 4.975463] usb 6-1: Manufacturer: Broadcom Corp [ 4.975466] usb 6-1: SerialNumber: 7CE9D3F8FB20 [ 4.990605] scsi host1: ahci [ 4.990875] ata1: SATA max UDMA/133 abar m1024@0x9034e000 port 0x9034e100 irq 19 [ 5.020089] tsc: Refined TSC clocksource calibration: 1297.237 MHz [ 5.020105] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x12b2ebef9b1, max_idle_ns: 440795214546 ns [ 5.056882] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.058433] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), 80:c1:6e:3f:65:f9, XID 0c900800 IRQ 25 [ 5.058440] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.078434] [drm] radeon kernel modesetting enabled. [ 5.078567] checking generic (80000000 300000) vs hw (80000000 10000000) [ 5.078569] fb: switching to radeondrmfb from VESA VGA [ 5.078650] Console: switching to colour dummy device 80x25 [ 5.079710] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x103C:0x3387 0x00). [ 5.079785] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] [ 5.079796] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs [ 5.080778] ATOM BIOS: HP [ 5.080918] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 5.080923] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF [ 5.080933] [drm] Detected VRAM RAM=384M, BAR=256M [ 5.080936] [drm] RAM width 32bits DDR [ 5.081193] [TTM] Zone kernel: Available graphics memory: 815632 kiB [ 5.081195] [TTM] Initializing pool allocator [ 5.081209] [TTM] Initializing DMA pool allocator [ 5.081273] [drm] radeon: 384M of VRAM memory ready [ 5.081276] [drm] radeon: 1024M of GTT memory ready. [ 5.081308] [drm] Loading PALM Microcode [ 5.081503] [drm] Internal thermal controller without fan control [ 5.081629] [drm] Found smc ucode version: 0x00010601 [ 5.081713] [drm] radeon: dpm initialized [ 5.082116] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.110647] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 5.111008] radeon 0000:00:01.0: WB enabled [ 5.111018] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x (ptrval) [ 5.111022] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x (ptrval) [ 5.111471] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x (ptrval) [ 5.111478] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.111479] [drm] Driver supports precise vblank timestamp query. [ 5.111483] radeon 0000:00:01.0: radeon: MSI limited to 32-bit [ 5.111589] radeon 0000:00:01.0: radeon: using MSI. [ 5.111639] [drm] radeon: irq initialized. [ 5.128569] [drm] ring test on 0 succeeded in 1 usecs [ 5.128646] [drm] ring test on 3 succeeded in 2 usecs [ 5.174427] [drm] ring test on 5 succeeded in 1 usecs [ 5.194314] [drm] UVD initialized successfully. [ 5.194704] [drm] ib test on ring 0 succeeded in 0 usecs [ 5.194754] [drm] ib test on ring 3 succeeded in 0 usecs [ 5.268696] r8169 0000:07:00.0 eno1: renamed from eth0 [ 5.404383] usb 3-4: new high-speed USB device number 3 using ehci-pci [ 5.468398] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.472391] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA50A, max UDMA/100 [ 5.472399] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.476412] ata1.00: configured for UDMA/100 [ 5.477328] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54755 A50A PQ: 0 ANSI: 5 [ 5.478938] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.478945] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 5.479066] sd 1:0:0:0: [sda] Write Protect is off [ 5.479072] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.479159] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.479378] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.547257] sda: sda1 sda2 < sda5 > [ 5.549410] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.573724] usb 3-4: New USB device found, idVendor=0bda, idProduct=0138 [ 5.573733] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.573737] usb 3-4: Product: USB2.0-CRW [ 5.573741] usb 3-4: Manufacturer: Generic [ 5.573744] usb 3-4: SerialNumber: 20090516388200000 [ 5.606301] random: fast init done [ 5.724414] [drm] ib test on ring 5 succeeded [ 5.732074] ums-realtek 3-4:1.0: USB Mass Storage device detected [ 5.738627] scsi host2: usb-storage 3-4:1.0 [ 5.738904] usbcore: registered new interface driver ums-realtek [ 5.748126] [drm] Radeon Display Connectors [ 5.748131] [drm] Connector 0: [ 5.748133] [drm] HDMI-A-1 [ 5.748134] [drm] HPD2 [ 5.748139] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 5.748140] [drm] Encoders: [ 5.748142] [drm] DFP1: INTERNAL_UNIPHY [ 5.748144] [drm] Connector 1: [ 5.748145] [drm] VGA-1 [ 5.748148] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 5.748149] [drm] Encoders: [ 5.748151] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.803582] psmouse serio1: synaptics: queried max coordinates: x [..5776], y [..5012] [ 5.822596] scsi 0:0:0:0: Direct-Access Kingston DT 100 G2 PMAP PQ: 0 ANSI: 0 CCS [ 5.823789] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 5.825195] sd 0:0:0:0: [sdb] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) [ 5.825998] sd 0:0:0:0: [sdb] Write Protect is off [ 5.826005] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 5.826937] sd 0:0:0:0: [sdb] No Caching mode page found [ 5.826952] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 5.832734] sdb: sdb1 [ 5.836674] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 5.867421] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1679, fw id: 724542 [ 5.911921] [drm] fb mappable at 0x80366000 [ 5.911925] [drm] vram apper at 0x80000000 [ 5.911927] [drm] size 4325376 [ 5.911929] [drm] fb depth is 24 [ 5.911931] [drm] pitch is 5632 [ 5.912359] fbcon: radeondrmfb (fb0) is primary device [ 5.912564] Console: switching to colour frame buffer device 170x48 [ 5.912665] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 5.937761] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 5.992262] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 [ 6.044808] clocksource: Switched to clocksource tsc [ 6.752485] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6.753543] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.761465] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 8.821485] random: crng init done [ 8.821493] random: 7 urandom warning(s) missed due to ratelimiting [ 13.839626] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 15.191331] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 15.208633] systemd[1]: Detected architecture x86-64. [ 15.221415] systemd[1]: Set hostname to . [ 16.469818] systemd[1]: Listening on udev Control Socket. [ 16.470082] systemd[1]: Reached target Encrypted Volumes. [ 16.470352] systemd[1]: Listening on Journal Audit Socket. [ 16.470505] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 16.470557] systemd[1]: Reached target User and Group Name Lookups. [ 16.470742] systemd[1]: Listening on Journal Socket. [ 16.470855] systemd[1]: Listening on fsck to fsckd communication Socket. [ 17.258963] lp: driver loaded but no devices found [ 17.329107] ppdev: user-space parallel port driver [ 17.428919] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 18.838353] systemd-journald[261]: Received request to flush runtime journal from PID 1 [ 28.367911] audit: type=1400 audit(1615142423.428:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=464 comm="apparmor_parser" [ 28.367932] audit: type=1400 audit(1615142423.428:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser" [ 28.367942] audit: type=1400 audit(1615142423.428:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=464 comm="apparmor_parser" [ 28.367953] audit: type=1400 audit(1615142423.428:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser" [ 28.376397] audit: type=1400 audit(1615142423.440:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=463 comm="apparmor_parser" [ 28.376413] audit: type=1400 audit(1615142423.440:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=463 comm="apparmor_parser" [ 28.425764] audit: type=1400 audit(1615142423.488:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=465 comm="apparmor_parser" [ 28.425780] audit: type=1400 audit(1615142423.488:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=465 comm="apparmor_parser" [ 28.425789] audit: type=1400 audit(1615142423.488:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=465 comm="apparmor_parser" [ 28.425798] audit: type=1400 audit(1615142423.488:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=465 comm="apparmor_parser" [ 28.436856] hp_accel: laptop model unknown, using default axes configuration [ 28.486271] lis3lv02d: 8 bits 3DC sensor found [ 28.580241] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 28.682601] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.791047] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 28.791060] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 28.816507] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 29.026506] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 29.062105] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 29.118752] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 29.188752] wl: loading out-of-tree module taints kernel. [ 29.188768] wl: module license 'MIXED/Proprietary' taints kernel. [ 29.188769] Disabling lock debugging due to kernel taint [ 29.214504] wl: module verification failed: signature and/or required key missing - tainting kernel [ 29.322287] kvm: Nested Virtualization enabled [ 29.322297] kvm: Nested Paging enabled [ 29.479349] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 29.515497] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD87B2/4: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 29.515514] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 29.515519] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 29.515522] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 29.515525] snd_hda_codec_idt hdaudioC1D0: inputs: [ 29.515531] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 29.515535] snd_hda_codec_idt hdaudioC1D0: Mic=0xc [ 29.561158] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [ 29.561382] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 29.844068] Bluetooth: Core ver 2.22 [ 29.844130] NET: Registered protocol family 31 [ 29.844133] Bluetooth: HCI device and connection manager initialized [ 29.844144] Bluetooth: HCI socket layer initialized [ 29.844150] Bluetooth: L2CAP socket layer initialized [ 29.844167] Bluetooth: SCO socket layer initialized [ 30.878339] usbcore: registered new interface driver btusb [ 31.003616] Bluetooth: hci0: BCM: chip id 63 [ 31.005684] Bluetooth: hci0: BCM: features 0x07 [ 31.024637] Bluetooth: hci0: BCM20702A [ 31.026915] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 31.058836] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e3.hcd failed with error -2 [ 31.058850] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e3.hcd not found [ 31.554597] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:998396k FS [ 31.808441] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.808447] Bluetooth: BNEP filters: protocol multicast [ 31.808461] Bluetooth: BNEP socket layer initialized [ 34.261868] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) [ 34.269585] wl 0000:03:00.0 wlo1: renamed from wlan0 [ 35.004477] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 35.193701] r8169 0000:07:00.0 eno1: link down [ 35.193838] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 35.195013] r8169 0000:07:00.0 eno1: link down [ 35.276818] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 35.972578] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 36.718238] r8169 0000:07:00.0 eno1: link up [ 36.718263] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 44.211044] Bluetooth: RFCOMM TTY layer initialized [ 44.211062] Bluetooth: RFCOMM socket layer initialized [ 44.211086] Bluetooth: RFCOMM ver 1.11 [ 134.753715] usb 2-1: USB disconnect, device number 2 [ 134.845090] blk_partition_remap: fail for partition 1 [ 134.845104] FAT-fs (sdb1): unable to read boot sector to mark fs as dirty [ 2120.731827] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 2992.930573] perf: interrupt took too long (3174 > 3148), lowering kernel.perf_event_max_sample_rate to 63000 [ 3069.476734] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3069.637612] usb 1-1: New USB device found, idVendor=05ac, idProduct=12ab [ 3069.637624] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3069.637630] usb 1-1: Product: iPad [ 3069.637635] usb 1-1: Manufacturer: Apple Inc. [ 3069.637641] usb 1-1: SerialNumber: 57499e9c2c33594257b08254431ef647246b5282 [ 3074.749105] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 3074.753050] usbcore: registered new interface driver ipheth [ 3075.719442] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 3078.352768] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3078.354847] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3089.134234] usb 1-1: USB disconnect, device number 2 [ 3089.152985] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 3091.092497] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 3091.252453] usb 1-1: New USB device found, idVendor=05ac, idProduct=12ab [ 3091.252465] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3091.252471] usb 1-1: Product: iPad [ 3091.252477] usb 1-1: Manufacturer: Apple Inc. [ 3091.252482] usb 1-1: SerialNumber: 57499e9c2c33594257b08254431ef647246b5282 [ 3091.429311] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 3091.510139] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 3091.599036] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3091.601358] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3191.408830] usb 1-1: USB disconnect, device number 3 [ 3191.439811] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 3194.739846] usb 1-1: new high-speed USB device number 4 using ehci-pci [ 3194.900227] usb 1-1: New USB device found, idVendor=05ac, idProduct=12ab [ 3194.900239] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3194.900245] usb 1-1: Product: iPad [ 3194.900250] usb 1-1: Manufacturer: Apple Inc. [ 3194.900255] usb 1-1: SerialNumber: 57499e9c2c33594257b08254431ef647246b5282 [ 3195.088752] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 3195.163746] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 3195.240653] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3195.241628] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3208.994384] usb 1-1: USB disconnect, device number 4 [ 3209.019650] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 3218.019725] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 3218.177797] usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8 [ 3218.177809] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3218.177815] usb 1-1: Product: iPhone [ 3218.177820] usb 1-1: Manufacturer: Apple Inc. [ 3218.177825] usb 1-1: SerialNumber: 6b880d72d41251f55df6c55a1e30dde15b1ca67b [ 3218.373436] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 3218.505954] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 3218.587094] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3218.588325] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3227.466533] usb 1-1: USB disconnect, device number 5 [ 3227.499522] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 3237.639578] usb 1-1: new high-speed USB device number 6 using ehci-pci [ 3237.800058] usb 1-1: New USB device found, idVendor=05ac, idProduct=12ab [ 3237.800070] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3237.800076] usb 1-1: Product: iPad [ 3237.800082] usb 1-1: Manufacturer: Apple Inc. [ 3237.800087] usb 1-1: SerialNumber: 57499e9c2c33594257b08254431ef647246b5282 [ 3238.300570] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 3238.314597] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 3238.417398] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3238.418997] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3277.810415] usb 1-1: USB disconnect, device number 6 [ 3277.839278] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 3284.355260] usb 1-1: new high-speed USB device number 7 using ehci-pci [ 3284.515857] usb 1-1: New USB device found, idVendor=05ac, idProduct=12ab [ 3284.515869] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3284.515875] usb 1-1: Product: iPad [ 3284.515881] usb 1-1: Manufacturer: Apple Inc. [ 3284.515886] usb 1-1: SerialNumber: 57499e9c2c33594257b08254431ef647246b5282 [ 3284.710656] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 3284.729508] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 3284.845900] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3284.847625] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 3504.953511] usb 1-1: USB disconnect, device number 7 [ 3504.990345] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 5949.942256] hp_wmi: Unknown event_id - 0 - 0x0 [ 6116.494816] usb 1-1: new high-speed USB device number 8 using ehci-pci [ 6116.654937] usb 1-1: New USB device found, idVendor=05ac, idProduct=12a8 [ 6116.654949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6116.654955] usb 1-1: Product: iPhone [ 6116.654960] usb 1-1: Manufacturer: Apple Inc. [ 6116.654966] usb 1-1: SerialNumber: deb2133b9aada83716a277e5d006c3ce744542e3 [ 6117.723719] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached [ 6118.391617] ipheth 1-1:4.2 enp0s18f2u1c4i2: renamed from eth0 [ 6119.098282] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 6119.101859] IPv6: ADDRCONF(NETDEV_UP): enp0s18f2u1c4i2: link is not ready [ 6226.078413] usb 1-1: USB disconnect, device number 8 [ 6226.105344] ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected [ 6233.309391] usb 1-1: new high-speed USB device number 9 using ehci-pci [ 6233.466926] usb 1-1: New USB device found, idVendor=05ac, idProduct=1281 [ 6233.466938] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 6233.466944] usb 1-1: Product: Apple Mobile Device (Recovery Mode) [ 6233.466949] usb 1-1: Manufacturer: Apple Inc. [ 6233.466955] usb 1-1: SerialNumber: CPID:8950 CPRV:20 CPFM:03 SCEP:10 BDID:00 ECID:000003EB1C105DC8 IBFL:1B SRNM:[DNRK4LXZDTTP] [ 6238.082872] usb 1-1: USB disconnect, device number 9 [ 6240.953287] usb 1-1: new high-speed USB device number 10 using ehci-pci [ 6241.110567] usb 1-1: New USB device found, idVendor=05ac, idProduct=1281 [ 6241.110579] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 6241.110585] usb 1-1: Product: Apple Mobile Device (Recovery Mode) [ 6241.110591] usb 1-1: Manufacturer: Apple Inc. [ 6241.110596] usb 1-1: SerialNumber: CPID:8950 CPRV:20 CPFM:03 SCEP:10 BDID:00 ECID:000003EB1C105DC8 IBFL:1B SRNM:[DNRK4LXZDTTP] [ 6270.669488] usb 1-1: USB disconnect, device number 10 [ 6278.448824] usb 5-1: new full-speed USB device number 2 using ohci-pci [ 6278.636066] usb 5-1: not running at top speed; connect to a high speed hub [ 6278.647840] usb 5-1: New USB device found, idVendor=05ac, idProduct=1281 [ 6278.647852] usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 6278.647858] usb 5-1: Product: Apple Mobile Device (Recovery Mode) [ 6278.647863] usb 5-1: Manufacturer: Apple Inc. [ 6278.647869] usb 5-1: SerialNumber: CPID:8950 CPRV:20 CPFM:03 SCEP:10 BDID:00 ECID:000003EB1C105DC8 IBFL:1B SRNM:[DNRK4LXZDTTP] [ 6303.055673] usb 5-1: USB disconnect, device number 2 [ 6305.188422] usb 2-1: new high-speed USB device number 4 using ehci-pci [ 6305.345812] usb 2-1: New USB device found, idVendor=05ac, idProduct=1281 [ 6305.345824] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 6305.345830] usb 2-1: Product: Apple Mobile Device (Recovery Mode) [ 6305.345836] usb 2-1: Manufacturer: Apple Inc. [ 6305.345841] usb 2-1: SerialNumber: CPID:8950 CPRV:20 CPFM:03 SCEP:10 BDID:00 ECID:000003EB1C105DC8 IBFL:1B SRNM:[DNRK4LXZDTTP] [ 6503.945845] perf: interrupt took too long (3973 > 3967), lowering kernel.perf_event_max_sample_rate to 50250 [ 7133.571594] usb 2-1: USB disconnect, device number 4 [ 7164.170158] usb 2-1: new high-speed USB device number 5 using ehci-pci [ 7164.328329] usb 2-1: New USB device found, idVendor=05ac, idProduct=12a8 [ 7164.328342] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7164.328348] usb 2-1: Product: iPhone [ 7164.328353] usb 2-1: Manufacturer: Apple Inc. [ 7164.328358] usb 2-1: SerialNumber: deb2133b9aada83716a277e5d006c3ce744542e3 [ 7164.620299] ipheth 2-1:4.2: Apple iPhone USB Ethernet device attached [ 7164.661911] ipheth 2-1:4.2 enp0s19f2u1c4i2: renamed from eth0 [ 7165.016389] IPv6: ADDRCONF(NETDEV_UP): enp0s19f2u1c4i2: link is not ready [ 7165.022042] IPv6: ADDRCONF(NETDEV_UP): enp0s19f2u1c4i2: link is not ready [ 7175.567084] usb 2-1: USB disconnect, device number 5 [ 7175.601937] ipheth 2-1:4.2: Apple iPhone USB Ethernet now disconnected [ 8499.384140] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 8499.384159] ata1.00: irq_stat 0x40000008 [ 8499.384172] ata1.00: failed command: READ FPDMA QUEUED [ 8499.384195] ata1.00: cmd 60/00:00:00:bb:5f/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 8499.384208] ata1.00: status: { DRDY ERR } [ 8499.384216] ata1.00: error: { UNC } [ 8499.393323] ata1.00: configured for UDMA/100 [ 8499.393385] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 8499.393397] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [ 8499.393407] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed [ 8499.393419] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 5f bb 00 00 01 00 00 [ 8499.393426] print_req_error: I/O error, dev sda, sector 6274008 [ 8499.393540] ata1: EH complete [ 8502.815982] ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0 [ 8502.816002] ata1.00: irq_stat 0x40000008 [ 8502.816016] ata1.00: failed command: READ FPDMA QUEUED [ 8502.816039] ata1.00: cmd 60/08:a8:d8:bb:5f/00:00:00:00:00/40 tag 21 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 8502.816052] ata1.00: status: { DRDY ERR } [ 8502.816060] ata1.00: error: { UNC } [ 8502.826007] ata1.00: configured for UDMA/100 [ 8502.826068] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 8502.826079] sd 1:0:0:0: [sda] tag#21 Sense Key : Medium Error [current] [ 8502.826089] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unrecovered read error - auto reallocate failed [ 8502.826101] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 8502.826107] print_req_error: I/O error, dev sda, sector 6274008 [ 8502.826207] ata1: EH complete [ 8546.655606] ata1.00: exception Emask 0x0 SAct 0x1c00 SErr 0x0 action 0x0 [ 8546.655628] ata1.00: irq_stat 0x40000008 [ 8546.655642] ata1.00: failed command: READ FPDMA QUEUED [ 8546.655665] ata1.00: cmd 60/08:50:d8:bb:5f/00:00:00:00:00/40 tag 10 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 8546.655678] ata1.00: status: { DRDY ERR } [ 8546.655686] ata1.00: error: { UNC } [ 8546.664887] ata1.00: configured for UDMA/100 [ 8546.664946] sd 1:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 8546.664958] sd 1:0:0:0: [sda] tag#10 Sense Key : Medium Error [current] [ 8546.664967] sd 1:0:0:0: [sda] tag#10 Add. Sense: Unrecovered read error - auto reallocate failed [ 8546.664979] sd 1:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 8546.664986] print_req_error: I/O error, dev sda, sector 6274008 [ 8546.665106] ata1: EH complete [ 8703.850197] ata1.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x0 [ 8703.850216] ata1.00: irq_stat 0x40000008 [ 8703.850230] ata1.00: failed command: READ FPDMA QUEUED [ 8703.850253] ata1.00: cmd 60/08:b0:d8:bb:5f/00:00:00:00:00/40 tag 22 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 8703.850265] ata1.00: status: { DRDY ERR } [ 8703.850273] ata1.00: error: { UNC } [ 8703.860506] ata1.00: configured for UDMA/100 [ 8703.860563] sd 1:0:0:0: [sda] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 8703.860573] sd 1:0:0:0: [sda] tag#22 Sense Key : Medium Error [current] [ 8703.860583] sd 1:0:0:0: [sda] tag#22 Add. Sense: Unrecovered read error - auto reallocate failed [ 8703.860595] sd 1:0:0:0: [sda] tag#22 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 8703.860602] print_req_error: I/O error, dev sda, sector 6274008 [ 8703.860722] ata1: EH complete [ 8779.121463] ata1.00: exception Emask 0x0 SAct 0x200 SErr 0x0 action 0x0 [ 8779.121482] ata1.00: irq_stat 0x40000008 [ 8779.121495] ata1.00: failed command: READ FPDMA QUEUED [ 8779.121518] ata1.00: cmd 60/08:48:d8:bb:5f/00:00:00:00:00/40 tag 9 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 8779.121531] ata1.00: status: { DRDY ERR } [ 8779.121538] ata1.00: error: { UNC } [ 8779.130904] ata1.00: configured for UDMA/100 [ 8779.130959] sd 1:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 8779.130969] sd 1:0:0:0: [sda] tag#9 Sense Key : Medium Error [current] [ 8779.130979] sd 1:0:0:0: [sda] tag#9 Add. Sense: Unrecovered read error - auto reallocate failed [ 8779.130990] sd 1:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 8779.130997] print_req_error: I/O error, dev sda, sector 6274008 [ 8779.131104] ata1: EH complete [ 9139.445571] ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0 [ 9139.445591] ata1.00: irq_stat 0x40000008 [ 9139.445605] ata1.00: failed command: READ FPDMA QUEUED [ 9139.445627] ata1.00: cmd 60/08:a8:d8:bb:5f/00:00:00:00:00/40 tag 21 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 9139.445640] ata1.00: status: { DRDY ERR } [ 9139.445648] ata1.00: error: { UNC } [ 9139.455203] ata1.00: configured for UDMA/100 [ 9139.455260] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9139.455271] sd 1:0:0:0: [sda] tag#21 Sense Key : Medium Error [current] [ 9139.455281] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unrecovered read error - auto reallocate failed [ 9139.455293] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 9139.455299] print_req_error: I/O error, dev sda, sector 6274008 [ 9139.455424] ata1: EH complete [ 9305.019840] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x0 [ 9305.019859] ata1.00: irq_stat 0x40000008 [ 9305.019873] ata1.00: failed command: READ FPDMA QUEUED [ 9305.019895] ata1.00: cmd 60/08:90:d8:bb:5f/00:00:00:00:00/40 tag 18 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 9305.019908] ata1.00: status: { DRDY ERR } [ 9305.019916] ata1.00: error: { UNC } [ 9305.029627] ata1.00: configured for UDMA/100 [ 9305.029684] sd 1:0:0:0: [sda] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9305.029694] sd 1:0:0:0: [sda] tag#18 Sense Key : Medium Error [current] [ 9305.029705] sd 1:0:0:0: [sda] tag#18 Add. Sense: Unrecovered read error - auto reallocate failed [ 9305.029716] sd 1:0:0:0: [sda] tag#18 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 9305.029723] print_req_error: I/O error, dev sda, sector 6274008 [ 9305.029849] ata1: EH complete [ 9420.622354] ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0 [ 9420.622373] ata1.00: irq_stat 0x40000008 [ 9420.622387] ata1.00: failed command: READ FPDMA QUEUED [ 9420.622410] ata1.00: cmd 60/08:f0:d8:bb:5f/00:00:00:00:00/40 tag 30 ncq dma 4096 in res 41/40:00:d8:bb:5f/00:00:00:00:00/40 Emask 0x409 (media error) [ 9420.622422] ata1.00: status: { DRDY ERR } [ 9420.622430] ata1.00: error: { UNC } [ 9420.632173] ata1.00: configured for UDMA/100 [ 9420.632230] sd 1:0:0:0: [sda] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9420.632241] sd 1:0:0:0: [sda] tag#30 Sense Key : Medium Error [current] [ 9420.632251] sd 1:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed [ 9420.632262] sd 1:0:0:0: [sda] tag#30 CDB: Read(10) 28 00 00 5f bb d8 00 00 08 00 [ 9420.632268] print_req_error: I/O error, dev sda, sector 6274008 [ 9420.632394] ata1: EH complete [ 9814.646019] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 9814.646039] ata1.00: irq_stat 0x40000008 [ 9814.646051] ata1.00: failed command: READ FPDMA QUEUED [ 9814.646074] ata1.00: cmd 60/30:00:98:e4:87/00:00:02:00:00/40 tag 0 ncq dma 24576 in res 41/40:00:b0:e4:87/00:00:02:00:00/40 Emask 0x409 (media error) [ 9814.646086] ata1.00: status: { DRDY ERR } [ 9814.646094] ata1.00: error: { UNC } [ 9814.653786] ata1.00: configured for UDMA/100 [ 9814.653843] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9814.653854] sd 1:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [ 9814.653864] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed [ 9814.653876] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 02 87 e4 98 00 00 30 00 [ 9814.653883] print_req_error: I/O error, dev sda, sector 42460336 [ 9814.654006] ata1: EH complete [ 9817.930205] ata1.00: exception Emask 0x0 SAct 0x1fe00000 SErr 0x0 action 0x0 [ 9817.930225] ata1.00: irq_stat 0x40000008 [ 9817.930239] ata1.00: failed command: READ FPDMA QUEUED [ 9817.930262] ata1.00: cmd 60/08:a8:b0:e4:87/00:00:02:00:00/40 tag 21 ncq dma 4096 in res 41/40:00:b0:e4:87/00:00:02:00:00/40 Emask 0x409 (media error) [ 9817.930275] ata1.00: status: { DRDY ERR } [ 9817.930283] ata1.00: error: { UNC } [ 9817.937812] ata1.00: configured for UDMA/100 [ 9817.937879] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9817.937891] sd 1:0:0:0: [sda] tag#21 Sense Key : Medium Error [current] [ 9817.937901] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unrecovered read error - auto reallocate failed [ 9817.937913] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 87 e4 b0 00 00 08 00 [ 9817.937919] print_req_error: I/O error, dev sda, sector 42460336 [ 9817.938073] ata1: EH complete [ 9821.726282] ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0 [ 9821.726301] ata1.00: irq_stat 0x40000008 [ 9821.726315] ata1.00: failed command: READ FPDMA QUEUED [ 9821.726337] ata1.00: cmd 60/08:a0:b0:e4:87/00:00:02:00:00/40 tag 20 ncq dma 4096 in res 41/40:00:b0:e4:87/00:00:02:00:00/40 Emask 0x409 (media error) [ 9821.726350] ata1.00: status: { DRDY ERR } [ 9821.726358] ata1.00: error: { UNC } [ 9821.734063] ata1.00: configured for UDMA/100 [ 9821.734117] sd 1:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9821.734127] sd 1:0:0:0: [sda] tag#20 Sense Key : Medium Error [current] [ 9821.734137] sd 1:0:0:0: [sda] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed [ 9821.734149] sd 1:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 02 87 e4 b0 00 00 08 00 [ 9821.734156] print_req_error: I/O error, dev sda, sector 42460336 [ 9821.734264] ata1: EH complete [ 9825.770180] ata1.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0 [ 9825.770200] ata1.00: irq_stat 0x40000008 [ 9825.770213] ata1.00: failed command: READ FPDMA QUEUED [ 9825.770236] ata1.00: cmd 60/00:50:00:d4:87/02:00:02:00:00/40 tag 10 ncq dma 262144 in res 41/40:00:70:d5:87/00:00:02:00:00/40 Emask 0x409 (media error) [ 9825.770248] ata1.00: status: { DRDY ERR } [ 9825.770256] ata1.00: error: { UNC } [ 9825.778052] ata1.00: configured for UDMA/100 [ 9825.778112] sd 1:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9825.778123] sd 1:0:0:0: [sda] tag#10 Sense Key : Medium Error [current] [ 9825.778133] sd 1:0:0:0: [sda] tag#10 Add. Sense: Unrecovered read error - auto reallocate failed [ 9825.778145] sd 1:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 02 87 d4 00 00 02 00 00 [ 9825.778151] print_req_error: I/O error, dev sda, sector 42456432 [ 9825.778289] ata1: EH complete [ 9829.126029] ata1.00: exception Emask 0x0 SAct 0x1ff8000 SErr 0x0 action 0x0 [ 9829.126049] ata1.00: irq_stat 0x40000008 [ 9829.126062] ata1.00: failed command: READ FPDMA QUEUED [ 9829.126085] ata1.00: cmd 60/08:78:70:d5:87/00:00:02:00:00/40 tag 15 ncq dma 4096 in res 41/40:00:70:d5:87/00:00:02:00:00/40 Emask 0x409 (media error) [ 9829.126098] ata1.00: status: { DRDY ERR } [ 9829.126106] ata1.00: error: { UNC } [ 9829.134800] ata1.00: configured for UDMA/100 [ 9829.134857] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9829.134865] sd 1:0:0:0: [sda] tag#15 Sense Key : Medium Error [current] [ 9829.134872] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unrecovered read error - auto reallocate failed [ 9829.134881] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 02 87 d5 70 00 00 08 00 [ 9829.134886] print_req_error: I/O error, dev sda, sector 42456432 [ 9829.134973] ata1: EH complete [ 9832.421767] ata1.00: exception Emask 0x0 SAct 0x5e SErr 0x0 action 0x0 [ 9832.421786] ata1.00: irq_stat 0x40000008 [ 9832.421799] ata1.00: failed command: READ FPDMA QUEUED [ 9832.421822] ata1.00: cmd 60/08:30:70:d5:87/00:00:02:00:00/40 tag 6 ncq dma 4096 in res 41/40:00:70:d5:87/00:00:02:00:00/40 Emask 0x409 (media error) [ 9832.421835] ata1.00: status: { DRDY ERR } [ 9832.421842] ata1.00: error: { UNC } [ 9832.430009] ata1.00: configured for UDMA/100 [ 9832.430099] sd 1:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9832.430111] sd 1:0:0:0: [sda] tag#6 Sense Key : Medium Error [current] [ 9832.430121] sd 1:0:0:0: [sda] tag#6 Add. Sense: Unrecovered read error - auto reallocate failed [ 9832.430132] sd 1:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 02 87 d5 70 00 00 08 00 [ 9832.430139] print_req_error: I/O error, dev sda, sector 42456432 [ 9832.430245] ata1: EH complete [ 9982.620767] systemd: 38 output lines suppressed due to ratelimiting [10281.814899] ata1.00: exception Emask 0x0 SAct 0x7e00 SErr 0x0 action 0x0 [10281.814914] ata1.00: irq_stat 0x40000008 [10281.814923] ata1.00: failed command: WRITE FPDMA QUEUED [10281.814937] ata1.00: cmd 61/d8:48:f0:8e:8e/00:00:02:00:00/40 tag 9 ncq dma 110592 out res 41/10:00:70:8f:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10281.814945] ata1.00: status: { DRDY ERR } [10281.814950] ata1.00: error: { IDNF } [10281.822411] ata1.00: configured for UDMA/100 [10281.822509] ata1: EH complete [10284.615055] ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0 [10284.615076] ata1.00: irq_stat 0x40000008 [10284.615088] ata1.00: failed command: WRITE FPDMA QUEUED [10284.615106] ata1.00: cmd 61/d8:a8:f0:8e:8e/00:00:02:00:00/40 tag 21 ncq dma 110592 out res 41/10:00:70:8f:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10284.615115] ata1.00: status: { DRDY ERR } [10284.615121] ata1.00: error: { IDNF } [10284.623486] ata1.00: configured for UDMA/100 [10284.623540] ata1: EH complete [10287.282884] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x0 [10287.282904] ata1.00: irq_stat 0x40000008 [10287.282917] ata1.00: failed command: WRITE FPDMA QUEUED [10287.282940] ata1.00: cmd 61/d8:38:f0:8e:8e/00:00:02:00:00/40 tag 7 ncq dma 110592 out res 41/10:00:70:8f:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10287.282953] ata1.00: status: { DRDY ERR } [10287.282960] ata1.00: error: { IDNF } [10287.292188] ata1.00: configured for UDMA/100 [10287.292260] ata1: EH complete [10289.954950] ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x0 [10289.954974] ata1.00: irq_stat 0x40000008 [10289.954985] ata1.00: failed command: WRITE FPDMA QUEUED [10289.955002] ata1.00: cmd 61/d8:c0:f0:8e:8e/00:00:02:00:00/40 tag 24 ncq dma 110592 out res 41/10:00:70:8f:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10289.955011] ata1.00: status: { DRDY ERR } [10289.955017] ata1.00: error: { IDNF } [10289.963195] ata1.00: configured for UDMA/100 [10289.963234] ata1: EH complete [10292.622976] ata1.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0 [10292.623032] ata1.00: irq_stat 0x40000008 [10292.623046] ata1.00: failed command: WRITE FPDMA QUEUED [10292.623069] ata1.00: cmd 61/d8:50:f0:8e:8e/00:00:02:00:00/40 tag 10 ncq dma 110592 out res 41/10:00:70:8f:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10292.623081] ata1.00: status: { DRDY ERR } [10292.623089] ata1.00: error: { IDNF } [10292.630611] ata1.00: configured for UDMA/100 [10292.630664] ata1: EH complete [10295.286953] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x0 [10295.286972] ata1.00: irq_stat 0x40000008 [10295.286986] ata1.00: failed command: WRITE FPDMA QUEUED [10295.287010] ata1.00: cmd 61/d8:d8:f0:8e:8e/00:00:02:00:00/40 tag 27 ncq dma 110592 out res 41/10:00:70:8f:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10295.287022] ata1.00: status: { DRDY ERR } [10295.287030] ata1.00: error: { IDNF } [10295.294660] ata1.00: configured for UDMA/100 [10295.294718] sd 1:0:0:0: [sda] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10295.294730] sd 1:0:0:0: [sda] tag#27 Sense Key : Illegal Request [current] [10295.294740] sd 1:0:0:0: [sda] tag#27 Add. Sense: Logical block address out of range [10295.294752] sd 1:0:0:0: [sda] tag#27 CDB: Write(10) 2a 00 02 8e 8e f0 00 00 d8 00 [10295.294759] print_req_error: I/O error, dev sda, sector 42897136 [10295.294780] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444195 (offset 0 size 61440 starting block 5362157) [10295.294791] Buffer I/O error on device sda1, logical block 5361886 [10295.294810] Buffer I/O error on device sda1, logical block 5361887 [10295.294819] Buffer I/O error on device sda1, logical block 5361888 [10295.294828] Buffer I/O error on device sda1, logical block 5361889 [10295.294837] Buffer I/O error on device sda1, logical block 5361890 [10295.294845] Buffer I/O error on device sda1, logical block 5361891 [10295.294854] Buffer I/O error on device sda1, logical block 5361892 [10295.294862] Buffer I/O error on device sda1, logical block 5361893 [10295.294871] Buffer I/O error on device sda1, logical block 5361894 [10295.294879] Buffer I/O error on device sda1, logical block 5361895 [10295.294907] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444200 (offset 0 size 49152 starting block 5362169) [10295.295001] ata1: EH complete [10296.123912] JBD2: Detected IO errors while flushing file data on sda1-8 [10299.202738] ata1.00: exception Emask 0x0 SAct 0xfff0000 SErr 0x0 action 0x0 [10299.202757] ata1.00: irq_stat 0x40000008 [10299.202770] ata1.00: failed command: WRITE FPDMA QUEUED [10299.202793] ata1.00: cmd 61/68:88:90:94:8e/03:00:02:00:00/40 tag 17 ncq dma 446464 out res 41/10:00:80:95:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10299.202805] ata1.00: status: { DRDY ERR } [10299.202813] ata1.00: error: { IDNF } [10299.210770] ata1.00: configured for UDMA/100 [10299.210831] ata1: EH complete [10302.094774] ata1.00: exception Emask 0x0 SAct 0x7e003fff SErr 0x0 action 0x0 [10302.094854] ata1.00: irq_stat 0x40000008 [10302.094868] ata1.00: failed command: WRITE FPDMA QUEUED [10302.094892] ata1.00: cmd 61/68:40:90:94:8e/03:00:02:00:00/40 tag 8 ncq dma 446464 out res 41/10:00:80:95:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10302.094904] ata1.00: status: { DRDY ERR } [10302.094912] ata1.00: error: { IDNF } [10302.102533] ata1.00: configured for UDMA/100 [10302.102618] ata1: EH complete [10305.022890] ata1.00: exception Emask 0x0 SAct 0x5e100c0f SErr 0x0 action 0x0 [10305.022909] ata1.00: irq_stat 0x40000008 [10305.022923] ata1.00: failed command: WRITE FPDMA QUEUED [10305.022946] ata1.00: cmd 61/68:d0:90:94:8e/03:00:02:00:00/40 tag 26 ncq dma 446464 out res 41/10:00:80:95:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10305.022958] ata1.00: status: { DRDY ERR } [10305.022966] ata1.00: error: { IDNF } [10305.030779] ata1.00: configured for UDMA/100 [10305.030854] ata1: EH complete [10307.746818] ata1.00: exception Emask 0x0 SAct 0x1d90000 SErr 0x0 action 0x0 [10307.746837] ata1.00: irq_stat 0x40000008 [10307.746850] ata1.00: failed command: WRITE FPDMA QUEUED [10307.746874] ata1.00: cmd 61/68:80:90:94:8e/03:00:02:00:00/40 tag 16 ncq dma 446464 out res 41/10:00:80:95:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10307.746886] ata1.00: status: { DRDY ERR } [10307.746894] ata1.00: error: { IDNF } [10307.755148] ata1.00: configured for UDMA/100 [10307.755212] ata1: EH complete [10310.538860] ata1.00: exception Emask 0x0 SAct 0x800f SErr 0x0 action 0x0 [10310.538880] ata1.00: irq_stat 0x40000008 [10310.538893] ata1.00: failed command: WRITE FPDMA QUEUED [10310.538916] ata1.00: cmd 61/68:78:90:94:8e/03:00:02:00:00/40 tag 15 ncq dma 446464 out res 41/10:00:80:95:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10310.538928] ata1.00: status: { DRDY ERR } [10310.538936] ata1.00: error: { IDNF } [10310.546749] ata1.00: configured for UDMA/100 [10310.546803] ata1: EH complete [10313.190658] ata1.00: exception Emask 0x0 SAct 0x3e0 SErr 0x0 action 0x0 [10313.190678] ata1.00: irq_stat 0x40000008 [10313.190691] ata1.00: failed command: WRITE FPDMA QUEUED [10313.190714] ata1.00: cmd 61/68:28:90:94:8e/03:00:02:00:00/40 tag 5 ncq dma 446464 out res 41/10:00:80:95:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10313.190727] ata1.00: status: { DRDY ERR } [10313.190735] ata1.00: error: { IDNF } [10313.198910] ata1.00: configured for UDMA/100 [10313.198989] sd 1:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10313.199001] sd 1:0:0:0: [sda] tag#5 Sense Key : Illegal Request [current] [10313.199011] sd 1:0:0:0: [sda] tag#5 Add. Sense: Logical block address out of range [10313.199023] sd 1:0:0:0: [sda] tag#5 CDB: Write(10) 2a 00 02 8e 94 90 00 03 68 00 [10313.199029] print_req_error: I/O error, dev sda, sector 42898576 [10313.199050] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444244 (offset 0 size 32768 starting block 5362330) [10313.199060] buffer_io_error: 17 callbacks suppressed [10313.199065] Buffer I/O error on device sda1, logical block 5362066 [10313.199084] Buffer I/O error on device sda1, logical block 5362067 [10313.199093] Buffer I/O error on device sda1, logical block 5362068 [10313.199102] Buffer I/O error on device sda1, logical block 5362069 [10313.199111] Buffer I/O error on device sda1, logical block 5362070 [10313.199120] Buffer I/O error on device sda1, logical block 5362071 [10313.199128] Buffer I/O error on device sda1, logical block 5362072 [10313.199137] Buffer I/O error on device sda1, logical block 5362073 [10313.199156] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444246 (offset 0 size 12288 starting block 5362333) [10313.199162] Buffer I/O error on device sda1, logical block 5362074 [10313.199172] Buffer I/O error on device sda1, logical block 5362075 [10313.199189] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444247 (offset 0 size 8192 starting block 5362335) [10313.199205] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444248 (offset 0 size 8192 starting block 5362337) [10313.199223] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444249 (offset 0 size 8192 starting block 5362339) [10313.199239] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444250 (offset 0 size 28672 starting block 5362346) [10313.199263] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444251 (offset 0 size 8192 starting block 5362348) [10313.199277] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444252 (offset 0 size 12288 starting block 5362351) [10313.199302] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444253 (offset 0 size 36864 starting block 5362360) [10313.199329] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1444265 (offset 0 size 45056 starting block 5362371) [10313.199575] ata1: EH complete [10313.199683] JBD2: Detected IO errors while flushing file data on sda1-8 [10323.434666] ata1.00: exception Emask 0x0 SAct 0xfe40 SErr 0x0 action 0x0 [10323.434685] ata1.00: irq_stat 0x40000008 [10323.434698] ata1.00: failed command: WRITE FPDMA QUEUED [10323.434721] ata1.00: cmd 61/c8:30:00:98:8e/03:00:02:00:00/40 tag 6 ncq dma 495616 out res 41/10:00:88:9b:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10323.434733] ata1.00: status: { DRDY ERR } [10323.434741] ata1.00: error: { IDNF } [10323.443132] ata1.00: configured for UDMA/100 [10323.443199] ata1: EH complete [10326.150651] ata1.00: exception Emask 0x0 SAct 0x1f81e00 SErr 0x0 action 0x0 [10326.150670] ata1.00: irq_stat 0x40000008 [10326.150684] ata1.00: failed command: WRITE FPDMA QUEUED [10326.150707] ata1.00: cmd 61/c8:c0:00:98:8e/03:00:02:00:00/40 tag 24 ncq dma 495616 out res 41/10:00:88:9b:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10326.150719] ata1.00: status: { DRDY ERR } [10326.150727] ata1.00: error: { IDNF } [10326.158964] ata1.00: configured for UDMA/100 [10326.159034] ata1: EH complete [10328.838362] ata1.00: exception Emask 0x0 SAct 0xffc300 SErr 0x0 action 0x0 [10328.838378] ata1.00: irq_stat 0x40000008 [10328.838388] ata1.00: failed command: WRITE FPDMA QUEUED [10328.838404] ata1.00: cmd 61/c8:70:00:98:8e/03:00:02:00:00/40 tag 14 ncq dma 495616 out res 41/10:00:88:9b:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10328.838413] ata1.00: status: { DRDY ERR } [10328.838419] ata1.00: error: { IDNF } [10328.846365] ata1.00: configured for UDMA/100 [10328.846440] ata1: EH complete [10331.590506] ata1.00: exception Emask 0x0 SAct 0x7fe000 SErr 0x0 action 0x0 [10331.590525] ata1.00: irq_stat 0x40000008 [10331.590538] ata1.00: failed command: WRITE FPDMA QUEUED [10331.590561] ata1.00: cmd 61/90:70:68:9f:8e/08:00:02:00:00/40 tag 14 ncq dma 1122304 ou res 41/10:00:90:a1:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10331.590573] ata1.00: status: { DRDY ERR } [10331.590581] ata1.00: error: { IDNF } [10331.597981] ata1.00: configured for UDMA/100 [10331.598052] ata1: EH complete [10334.306499] ata1.00: exception Emask 0x0 SAct 0x3fc0c SErr 0x0 action 0x0 [10334.306518] ata1.00: irq_stat 0x40000008 [10334.306531] ata1.00: failed command: WRITE FPDMA QUEUED [10334.306554] ata1.00: cmd 61/c8:50:00:98:8e/03:00:02:00:00/40 tag 10 ncq dma 495616 out res 41/10:00:88:9b:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10334.306566] ata1.00: status: { DRDY ERR } [10334.306574] ata1.00: error: { IDNF } [10334.314585] ata1.00: configured for UDMA/100 [10334.314649] ata1: EH complete [10337.002512] ata1.00: exception Emask 0x0 SAct 0x27fde SErr 0x0 action 0x0 [10337.002532] ata1.00: irq_stat 0x40000008 [10337.002545] ata1.00: failed command: WRITE FPDMA QUEUED [10337.002569] ata1.00: cmd 61/90:30:68:9f:8e/08:00:02:00:00/40 tag 6 ncq dma 1122304 ou res 41/10:00:90:a1:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10337.002581] ata1.00: status: { DRDY ERR } [10337.002589] ata1.00: error: { IDNF } [10337.010787] ata1.00: configured for UDMA/100 [10337.010866] ata1: EH complete [10339.730526] ata1.00: exception Emask 0x0 SAct 0xffe30 SErr 0x0 action 0x0 [10339.730545] ata1.00: irq_stat 0x40000008 [10339.730558] ata1.00: failed command: WRITE FPDMA QUEUED [10339.730581] ata1.00: cmd 61/c8:48:00:98:8e/03:00:02:00:00/40 tag 9 ncq dma 495616 out res 41/10:00:88:9b:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10339.730593] ata1.00: status: { DRDY ERR } [10339.730601] ata1.00: error: { IDNF } [10339.738474] ata1.00: configured for UDMA/100 [10339.738564] ata1: EH complete [10342.466397] ata1.00: exception Emask 0x0 SAct 0x2ff9e0 SErr 0x0 action 0x0 [10342.466415] ata1.00: irq_stat 0x40000008 [10342.466428] ata1.00: failed command: WRITE FPDMA QUEUED [10342.466451] ata1.00: cmd 61/90:58:68:9f:8e/08:00:02:00:00/40 tag 11 ncq dma 1122304 ou res 41/10:00:90:a1:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10342.466464] ata1.00: status: { DRDY ERR } [10342.466471] ata1.00: error: { IDNF } [10342.474580] ata1.00: configured for UDMA/100 [10342.474660] ata1: EH complete [10347.662293] ata1.00: exception Emask 0x0 SAct 0xffe700 SErr 0x0 action 0x0 [10347.662312] ata1.00: irq_stat 0x40000008 [10347.662325] ata1.00: failed command: WRITE FPDMA QUEUED [10347.662349] ata1.00: cmd 61/c8:68:00:98:8e/03:00:02:00:00/40 tag 13 ncq dma 495616 out res 41/10:00:90:9b:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10347.662361] ata1.00: status: { DRDY ERR } [10347.662369] ata1.00: error: { IDNF } [10347.670061] ata1.00: configured for UDMA/100 [10347.670176] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10347.670188] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] [10347.670198] sd 1:0:0:0: [sda] tag#13 Add. Sense: Logical block address out of range [10347.670209] sd 1:0:0:0: [sda] tag#13 CDB: Write(10) 2a 00 02 8e 98 00 00 03 c8 00 [10347.670216] print_req_error: I/O error, dev sda, sector 42899456 [10347.670232] EXT4-fs warning: 6 callbacks suppressed [10347.670240] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315969 (offset 0 size 12288 starting block 5362435) [10347.670250] buffer_io_error: 99 callbacks suppressed [10347.670254] Buffer I/O error on device sda1, logical block 5362176 [10347.670274] Buffer I/O error on device sda1, logical block 5362177 [10347.670283] Buffer I/O error on device sda1, logical block 5362178 [10347.670302] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315970 (offset 0 size 16384 starting block 5362439) [10347.670308] Buffer I/O error on device sda1, logical block 5362179 [10347.670318] Buffer I/O error on device sda1, logical block 5362180 [10347.670326] Buffer I/O error on device sda1, logical block 5362181 [10347.670335] Buffer I/O error on device sda1, logical block 5362182 [10347.670350] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315971 (offset 0 size 28672 starting block 5362446) [10347.670355] Buffer I/O error on device sda1, logical block 5362183 [10347.670364] Buffer I/O error on device sda1, logical block 5362184 [10347.670372] Buffer I/O error on device sda1, logical block 5362185 [10347.670393] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315972 (offset 0 size 8192 starting block 5362448) [10347.670408] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315973 (offset 0 size 12288 starting block 5362451) [10347.670426] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315974 (offset 0 size 16384 starting block 5362455) [10347.670444] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315975 (offset 0 size 28672 starting block 5362462) [10347.670466] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315976 (offset 0 size 8192 starting block 5362464) [10347.670481] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315977 (offset 0 size 12288 starting block 5362467) [10347.670508] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1315978 (offset 0 size 16384 starting block 5362471) [10347.670741] ata1: EH complete [10350.441996] ata1.00: exception Emask 0x0 SAct 0x3fef400 SErr 0x0 action 0x0 [10350.442016] ata1.00: irq_stat 0x40000008 [10350.442030] ata1.00: failed command: WRITE FPDMA QUEUED [10350.442053] ata1.00: cmd 61/90:88:68:9f:8e/08:00:02:00:00/40 tag 17 ncq dma 1122304 ou res 41/10:00:90:a1:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10350.442065] ata1.00: status: { DRDY ERR } [10350.442073] ata1.00: error: { IDNF } [10350.450029] ata1.00: configured for UDMA/100 [10350.450108] ata1: EH complete [10353.214110] ata1.00: exception Emask 0x0 SAct 0x7e000000 SErr 0x0 action 0x0 [10353.214129] ata1.00: irq_stat 0x40000008 [10353.214143] ata1.00: failed command: WRITE FPDMA QUEUED [10353.214166] ata1.00: cmd 61/90:c8:68:9f:8e/08:00:02:00:00/40 tag 25 ncq dma 1122304 ou res 41/10:00:90:a1:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10353.214179] ata1.00: status: { DRDY ERR } [10353.214186] ata1.00: error: { IDNF } [10353.221948] ata1.00: configured for UDMA/100 [10353.222008] ata1: EH complete [10355.982013] ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0 [10355.982032] ata1.00: irq_stat 0x40000008 [10355.982046] ata1.00: failed command: WRITE FPDMA QUEUED [10355.982069] ata1.00: cmd 61/90:a8:68:9f:8e/08:00:02:00:00/40 tag 21 ncq dma 1122304 ou res 41/10:00:90:a1:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10355.982081] ata1.00: status: { DRDY ERR } [10355.982089] ata1.00: error: { IDNF } [10355.990356] ata1.00: configured for UDMA/100 [10355.990443] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10355.990452] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] [10355.990459] sd 1:0:0:0: [sda] tag#21 Add. Sense: Logical block address out of range [10355.990468] sd 1:0:0:0: [sda] tag#21 CDB: Write(10) 2a 00 02 8e 9f 68 00 08 90 00 [10355.990473] print_req_error: I/O error, dev sda, sector 42901352 [10355.990486] EXT4-fs warning: 10 callbacks suppressed [10355.990492] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575473 (offset 0 size 24576 starting block 5362675) [10355.990500] buffer_io_error: 111 callbacks suppressed [10355.990504] Buffer I/O error on device sda1, logical block 5362413 [10355.990519] Buffer I/O error on device sda1, logical block 5362414 [10355.990526] Buffer I/O error on device sda1, logical block 5362415 [10355.990533] Buffer I/O error on device sda1, logical block 5362416 [10355.990539] Buffer I/O error on device sda1, logical block 5362417 [10355.990545] Buffer I/O error on device sda1, logical block 5362418 [10355.990566] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575474 (offset 0 size 8192 starting block 5362677) [10355.990570] Buffer I/O error on device sda1, logical block 5362419 [10355.990577] Buffer I/O error on device sda1, logical block 5362420 [10355.990588] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575475 (offset 0 size 20480 starting block 5362682) [10355.990592] Buffer I/O error on device sda1, logical block 5362421 [10355.990599] Buffer I/O error on device sda1, logical block 5362422 [10355.990617] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575476 (offset 0 size 12288 starting block 5362685) [10355.990630] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575477 (offset 0 size 20480 starting block 5362690) [10355.990645] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575478 (offset 0 size 24576 starting block 5362696) [10355.990662] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575479 (offset 0 size 12288 starting block 5362699) [10355.990674] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575480 (offset 0 size 24576 starting block 5362705) [10355.990691] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575481 (offset 0 size 36864 starting block 5362714) [10355.990711] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1575482 (offset 0 size 24576 starting block 5362720) [10355.991182] ata1: EH complete [10355.991386] JBD2: Detected IO errors while flushing file data on sda1-8 [10360.646110] ata1.00: exception Emask 0x0 SAct 0x7ff000ff SErr 0x0 action 0x0 [10360.646129] ata1.00: irq_stat 0x40000008 [10360.646143] ata1.00: failed command: WRITE FPDMA QUEUED [10360.646166] ata1.00: cmd 61/40:a0:28:ad:8e/05:00:02:00:00/40 tag 20 ncq dma 688128 out res 41/10:00:a8:ad:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10360.646178] ata1.00: status: { DRDY ERR } [10360.646186] ata1.00: error: { IDNF } [10360.653887] ata1.00: configured for UDMA/100 [10360.653960] ata1: EH complete [10363.486076] ata1.00: exception Emask 0x0 SAct 0xffc0003 SErr 0x0 action 0x0 [10363.486095] ata1.00: irq_stat 0x40000008 [10363.486108] ata1.00: failed command: WRITE FPDMA QUEUED [10363.486131] ata1.00: cmd 61/20:90:68:b2:8e/05:00:02:00:00/40 tag 18 ncq dma 671744 out res 41/10:00:b8:b3:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10363.486144] ata1.00: status: { DRDY ERR } [10363.486151] ata1.00: error: { IDNF } [10363.493997] ata1.00: configured for UDMA/100 [10363.494126] ata1: EH complete [10366.245906] ata1.00: exception Emask 0x0 SAct 0x7800 SErr 0x0 action 0x0 [10366.245926] ata1.00: irq_stat 0x40000008 [10366.245940] ata1.00: failed command: WRITE FPDMA QUEUED [10366.245963] ata1.00: cmd 61/40:58:28:ad:8e/05:00:02:00:00/40 tag 11 ncq dma 688128 out res 41/10:00:a8:ad:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10366.245976] ata1.00: status: { DRDY ERR } [10366.245984] ata1.00: error: { IDNF } [10366.254036] ata1.00: configured for UDMA/100 [10366.254103] ata1: EH complete [10368.945996] ata1.00: exception Emask 0x0 SAct 0xc SErr 0x0 action 0x0 [10368.946015] ata1.00: irq_stat 0x40000008 [10368.946028] ata1.00: failed command: WRITE FPDMA QUEUED [10368.946051] ata1.00: cmd 61/20:10:68:b2:8e/05:00:02:00:00/40 tag 2 ncq dma 671744 out res 41/10:00:b8:b3:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10368.946063] ata1.00: status: { DRDY ERR } [10368.946071] ata1.00: error: { IDNF } [10368.953930] ata1.00: configured for UDMA/100 [10368.953988] ata1: EH complete [10371.601792] ata1.00: exception Emask 0x0 SAct 0x300000 SErr 0x0 action 0x0 [10371.601811] ata1.00: irq_stat 0x40000008 [10371.601825] ata1.00: failed command: WRITE FPDMA QUEUED [10371.601847] ata1.00: cmd 61/40:a0:28:ad:8e/05:00:02:00:00/40 tag 20 ncq dma 688128 out res 41/10:00:a8:ad:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10371.601860] ata1.00: status: { DRDY ERR } [10371.601868] ata1.00: error: { IDNF } [10371.609520] ata1.00: configured for UDMA/100 [10371.609576] ata1: EH complete [10374.269752] ata1.00: exception Emask 0x0 SAct 0x180 SErr 0x0 action 0x0 [10374.269771] ata1.00: irq_stat 0x40000008 [10374.269784] ata1.00: failed command: WRITE FPDMA QUEUED [10374.269807] ata1.00: cmd 61/20:38:68:b2:8e/05:00:02:00:00/40 tag 7 ncq dma 671744 out res 41/10:00:b8:b3:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10374.269819] ata1.00: status: { DRDY ERR } [10374.269826] ata1.00: error: { IDNF } [10374.277572] ata1.00: configured for UDMA/100 [10374.277631] ata1: EH complete [10376.925890] ata1.00: exception Emask 0x0 SAct 0x6000000 SErr 0x0 action 0x0 [10376.925909] ata1.00: irq_stat 0x40000008 [10376.925923] ata1.00: failed command: WRITE FPDMA QUEUED [10376.925947] ata1.00: cmd 61/40:c8:28:ad:8e/05:00:02:00:00/40 tag 25 ncq dma 688128 out res 41/10:00:a8:ad:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10376.925959] ata1.00: status: { DRDY ERR } [10376.925967] ata1.00: error: { IDNF } [10376.933570] ata1.00: configured for UDMA/100 [10376.933677] ata1: EH complete [10379.593801] ata1.00: exception Emask 0x0 SAct 0x3000 SErr 0x0 action 0x0 [10379.593820] ata1.00: irq_stat 0x40000008 [10379.593832] ata1.00: failed command: WRITE FPDMA QUEUED [10379.593855] ata1.00: cmd 61/20:60:68:b2:8e/05:00:02:00:00/40 tag 12 ncq dma 671744 out res 41/10:00:b8:b3:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10379.593868] ata1.00: status: { DRDY ERR } [10379.593876] ata1.00: error: { IDNF } [10379.601639] ata1.00: configured for UDMA/100 [10379.601701] ata1: EH complete [10382.249741] ata1.00: exception Emask 0x0 SAct 0x40000001 SErr 0x0 action 0x0 [10382.249759] ata1.00: irq_stat 0x40000008 [10382.249774] ata1.00: failed command: WRITE FPDMA QUEUED [10382.249797] ata1.00: cmd 61/40:f0:28:ad:8e/05:00:02:00:00/40 tag 30 ncq dma 688128 out res 41/10:00:a8:ad:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10382.249809] ata1.00: status: { DRDY ERR } [10382.249817] ata1.00: error: { IDNF } [10382.257671] ata1.00: configured for UDMA/100 [10382.257731] ata1: EH complete [10384.913181] ata1.00: exception Emask 0x0 SAct 0x60000 SErr 0x0 action 0x0 [10384.913201] ata1.00: irq_stat 0x40000008 [10384.913214] ata1.00: failed command: WRITE FPDMA QUEUED [10384.913238] ata1.00: cmd 61/40:88:28:ad:8e/05:00:02:00:00/40 tag 17 ncq dma 688128 out res 41/10:00:a8:ad:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10384.913251] ata1.00: status: { DRDY ERR } [10384.913259] ata1.00: error: { IDNF } [10384.921248] ata1.00: configured for UDMA/100 [10384.921329] sd 1:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10384.921340] sd 1:0:0:0: [sda] tag#17 Sense Key : Illegal Request [current] [10384.921350] sd 1:0:0:0: [sda] tag#17 Add. Sense: Logical block address out of range [10384.921362] sd 1:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 02 8e ad 28 00 05 40 00 [10384.921368] print_req_error: I/O error, dev sda, sector 42904872 [10384.921384] EXT4-fs warning: 37 callbacks suppressed [10384.921393] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576169 (offset 0 size 49152 starting block 5363121) [10384.921402] buffer_io_error: 264 callbacks suppressed [10384.921406] Buffer I/O error on device sda1, logical block 5362853 [10384.921427] Buffer I/O error on device sda1, logical block 5362854 [10384.921436] Buffer I/O error on device sda1, logical block 5362855 [10384.921445] Buffer I/O error on device sda1, logical block 5362856 [10384.921454] Buffer I/O error on device sda1, logical block 5362857 [10384.921462] Buffer I/O error on device sda1, logical block 5362858 [10384.921471] Buffer I/O error on device sda1, logical block 5362859 [10384.921479] Buffer I/O error on device sda1, logical block 5362860 [10384.921487] Buffer I/O error on device sda1, logical block 5362861 [10384.921495] Buffer I/O error on device sda1, logical block 5362862 [10384.921518] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576170 (offset 0 size 28672 starting block 5363128) [10384.921542] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576172 (offset 0 size 32768 starting block 5363136) [10384.921568] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576174 (offset 0 size 20480 starting block 5363141) [10384.921588] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576179 (offset 0 size 53248 starting block 5363154) [10384.921627] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576180 (offset 0 size 36864 starting block 5363163) [10384.921654] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576181 (offset 0 size 20480 starting block 5363168) [10384.921674] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576182 (offset 0 size 20480 starting block 5363173) [10384.921694] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576183 (offset 0 size 8192 starting block 5363175) [10384.921709] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576184 (offset 0 size 45056 starting block 5363186) [10384.921982] ata1: EH complete [10387.593736] ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0 [10387.593755] ata1.00: irq_stat 0x40000008 [10387.593767] ata1.00: failed command: WRITE FPDMA QUEUED [10387.593791] ata1.00: cmd 61/20:28:68:b2:8e/05:00:02:00:00/40 tag 5 ncq dma 671744 out res 41/10:00:b8:b3:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10387.593803] ata1.00: status: { DRDY ERR } [10387.593811] ata1.00: error: { IDNF } [10387.601669] ata1.00: configured for UDMA/100 [10387.601723] ata1: EH complete [10390.285358] ata1.00: exception Emask 0x0 SAct 0x40ff80 SErr 0x0 action 0x0 [10390.285377] ata1.00: irq_stat 0x40000008 [10390.285390] ata1.00: failed command: WRITE FPDMA QUEUED [10390.285413] ata1.00: cmd 61/20:b0:68:b2:8e/05:00:02:00:00/40 tag 22 ncq dma 671744 out res 41/10:00:b8:b3:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10390.285426] ata1.00: status: { DRDY ERR } [10390.285434] ata1.00: error: { IDNF } [10390.292861] ata1.00: configured for UDMA/100 [10390.292970] sd 1:0:0:0: [sda] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10390.292981] sd 1:0:0:0: [sda] tag#22 Sense Key : Illegal Request [current] [10390.292992] sd 1:0:0:0: [sda] tag#22 Add. Sense: Logical block address out of range [10390.293003] sd 1:0:0:0: [sda] tag#22 CDB: Write(10) 2a 00 02 8e b2 68 00 05 20 00 [10390.293010] print_req_error: I/O error, dev sda, sector 42906216 [10390.293026] EXT4-fs warning: 9 callbacks suppressed [10390.293034] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576201 (offset 0 size 53248 starting block 5363290) [10390.293044] buffer_io_error: 158 callbacks suppressed [10390.293048] Buffer I/O error on device sda1, logical block 5363021 [10390.293069] Buffer I/O error on device sda1, logical block 5363022 [10390.293079] Buffer I/O error on device sda1, logical block 5363023 [10390.293088] Buffer I/O error on device sda1, logical block 5363024 [10390.293097] Buffer I/O error on device sda1, logical block 5363025 [10390.293105] Buffer I/O error on device sda1, logical block 5363026 [10390.293113] Buffer I/O error on device sda1, logical block 5363027 [10390.293122] Buffer I/O error on device sda1, logical block 5363028 [10390.293130] Buffer I/O error on device sda1, logical block 5363029 [10390.293138] Buffer I/O error on device sda1, logical block 5363030 [10390.293160] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576203 (offset 0 size 24576 starting block 5363296) [10390.293190] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576204 (offset 0 size 24576 starting block 5363302) [10390.293216] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576205 (offset 0 size 40960 starting block 5363312) [10390.293244] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576208 (offset 0 size 24576 starting block 5363318) [10390.293267] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576210 (offset 0 size 20480 starting block 5363323) [10390.293287] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576212 (offset 0 size 32768 starting block 5363331) [10390.293314] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576214 (offset 0 size 45056 starting block 5363342) [10390.293347] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576215 (offset 0 size 16384 starting block 5363346) [10390.293366] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576216 (offset 0 size 61440 starting block 5363361) [10390.293608] ata1: EH complete [10390.699588] JBD2: Detected IO errors while flushing file data on sda1-8 [10398.661701] ata1.00: exception Emask 0x0 SAct 0x3fffffe SErr 0x0 action 0x0 [10398.661720] ata1.00: irq_stat 0x40000008 [10398.661732] ata1.00: failed command: WRITE FPDMA QUEUED [10398.661755] ata1.00: cmd 61/88:08:d8:bc:8e/05:00:02:00:00/40 tag 1 ncq dma 724992 out res 41/10:00:e0:c0:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10398.661768] ata1.00: status: { DRDY ERR } [10398.661775] ata1.00: error: { IDNF } [10398.669589] ata1.00: configured for UDMA/100 [10398.669702] ata1: EH complete [10401.573161] ata1.00: exception Emask 0x0 SAct 0x7f1fffe7 SErr 0x0 action 0x0 [10401.573180] ata1.00: irq_stat 0x40000008 [10401.573194] ata1.00: failed command: WRITE FPDMA QUEUED [10401.573217] ata1.00: cmd 61/10:98:60:c2:8e/05:00:02:00:00/40 tag 19 ncq dma 663552 out res 41/10:00:f0:c6:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10401.573230] ata1.00: status: { DRDY ERR } [10401.573238] ata1.00: error: { IDNF } [10401.581193] ata1.00: configured for UDMA/100 [10401.581303] ata1: EH complete [10404.393048] ata1.00: exception Emask 0x0 SAct 0x6ffff80a SErr 0x0 action 0x0 [10404.393063] ata1.00: irq_stat 0x40000008 [10404.393073] ata1.00: failed command: WRITE FPDMA QUEUED [10404.393088] ata1.00: cmd 61/88:58:d8:bc:8e/05:00:02:00:00/40 tag 11 ncq dma 724992 out res 41/10:00:e0:c0:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10404.393096] ata1.00: status: { DRDY ERR } [10404.393101] ata1.00: error: { IDNF } [10404.402042] ata1.00: configured for UDMA/100 [10404.402138] ata1: EH complete [10407.189445] ata1.00: exception Emask 0x0 SAct 0x7ff80fdf SErr 0x0 action 0x0 [10407.189465] ata1.00: irq_stat 0x40000008 [10407.189480] ata1.00: failed command: WRITE FPDMA QUEUED [10407.189503] ata1.00: cmd 61/10:d0:60:c2:8e/05:00:02:00:00/40 tag 26 ncq dma 663552 out res 41/10:00:f0:c6:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10407.189515] ata1.00: status: { DRDY ERR } [10407.189523] ata1.00: error: { IDNF } [10407.199246] ata1.00: configured for UDMA/100 [10407.199348] ata1: EH complete [10409.933579] ata1.00: exception Emask 0x0 SAct 0x1ffffe20 SErr 0x0 action 0x0 [10409.933598] ata1.00: irq_stat 0x40000008 [10409.933611] ata1.00: failed command: WRITE FPDMA QUEUED [10409.933633] ata1.00: cmd 61/88:48:d8:bc:8e/05:00:02:00:00/40 tag 9 ncq dma 724992 out res 41/10:00:e0:c0:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10409.933646] ata1.00: status: { DRDY ERR } [10409.933654] ata1.00: error: { IDNF } [10409.942726] ata1.00: configured for UDMA/100 [10409.942807] ata1: EH complete [10412.769504] ata1.00: exception Emask 0x0 SAct 0xffc03fc SErr 0x0 action 0x0 [10412.769523] ata1.00: irq_stat 0x40000008 [10412.769537] ata1.00: failed command: WRITE FPDMA QUEUED [10412.769560] ata1.00: cmd 61/10:c8:60:c2:8e/05:00:02:00:00/40 tag 25 ncq dma 663552 out res 41/10:00:f0:c6:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10412.769573] ata1.00: status: { DRDY ERR } [10412.769580] ata1.00: error: { IDNF } [10412.779132] ata1.00: configured for UDMA/100 [10412.779282] ata1: EH complete [10415.473034] ata1.00: exception Emask 0x0 SAct 0x1ffff000 SErr 0x0 action 0x0 [10415.473054] ata1.00: irq_stat 0x40000008 [10415.473067] ata1.00: failed command: WRITE FPDMA QUEUED [10415.473090] ata1.00: cmd 61/88:60:d8:bc:8e/05:00:02:00:00/40 tag 12 ncq dma 724992 out res 41/10:00:e0:c0:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10415.473103] ata1.00: status: { DRDY ERR } [10415.473111] ata1.00: error: { IDNF } [10415.482746] ata1.00: configured for UDMA/100 [10415.482837] ata1: EH complete [10418.425304] ata1.00: exception Emask 0x0 SAct 0x7fcb8007 SErr 0x0 action 0x0 [10418.425323] ata1.00: irq_stat 0x40000008 [10418.425337] ata1.00: failed command: WRITE FPDMA QUEUED [10418.425360] ata1.00: cmd 61/10:80:60:c2:8e/05:00:02:00:00/40 tag 16 ncq dma 663552 out res 41/10:00:f0:c6:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10418.425372] ata1.00: status: { DRDY ERR } [10418.425380] ata1.00: error: { IDNF } [10418.435241] ata1.00: configured for UDMA/100 [10418.435391] ata1: EH complete [10421.333249] ata1.00: exception Emask 0x0 SAct 0xbc060 SErr 0x0 action 0x0 [10421.333268] ata1.00: irq_stat 0x40000008 [10421.333281] ata1.00: failed command: WRITE FPDMA QUEUED [10421.333304] ata1.00: cmd 61/88:70:d8:bc:8e/05:00:02:00:00/40 tag 14 ncq dma 724992 out res 41/10:00:e0:c0:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10421.333317] ata1.00: status: { DRDY ERR } [10421.333325] ata1.00: error: { IDNF } [10421.343060] ata1.00: configured for UDMA/100 [10421.343133] ata1: EH complete [10424.144896] ata1.00: exception Emask 0x0 SAct 0x40007800 SErr 0x0 action 0x0 [10424.144916] ata1.00: irq_stat 0x40000008 [10424.144929] ata1.00: failed command: WRITE FPDMA QUEUED [10424.144952] ata1.00: cmd 61/10:58:60:c2:8e/05:00:02:00:00/40 tag 11 ncq dma 663552 out res 41/10:00:f0:c6:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10424.144964] ata1.00: status: { DRDY ERR } [10424.144972] ata1.00: error: { IDNF } [10424.154669] ata1.00: configured for UDMA/100 [10424.154738] ata1: EH complete [10426.876718] ata1.00: exception Emask 0x0 SAct 0x200030 SErr 0x0 action 0x0 [10426.876737] ata1.00: irq_stat 0x40000008 [10426.876749] ata1.00: failed command: WRITE FPDMA QUEUED [10426.876772] ata1.00: cmd 61/88:20:d8:bc:8e/05:00:02:00:00/40 tag 4 ncq dma 724992 out res 41/10:00:e0:c0:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10426.876785] ata1.00: status: { DRDY ERR } [10426.876792] ata1.00: error: { IDNF } [10426.886314] ata1.00: configured for UDMA/100 [10426.886399] sd 1:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10426.886410] sd 1:0:0:0: [sda] tag#4 Sense Key : Illegal Request [current] [10426.886420] sd 1:0:0:0: [sda] tag#4 Add. Sense: Logical block address out of range [10426.886431] sd 1:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 02 8e bc d8 00 05 88 00 [10426.886438] print_req_error: I/O error, dev sda, sector 42908888 [10426.886454] EXT4-fs warning: 12 callbacks suppressed [10426.886462] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1316106 (offset 0 size 61440 starting block 5363626) [10426.886471] buffer_io_error: 154 callbacks suppressed [10426.886475] Buffer I/O error on device sda1, logical block 5363355 [10426.886494] Buffer I/O error on device sda1, logical block 5363356 [10426.886504] Buffer I/O error on device sda1, logical block 5363357 [10426.886513] Buffer I/O error on device sda1, logical block 5363358 [10426.886521] Buffer I/O error on device sda1, logical block 5363359 [10426.886530] Buffer I/O error on device sda1, logical block 5363360 [10426.886538] Buffer I/O error on device sda1, logical block 5363361 [10426.886546] Buffer I/O error on device sda1, logical block 5363362 [10426.886554] Buffer I/O error on device sda1, logical block 5363363 [10426.886563] Buffer I/O error on device sda1, logical block 5363364 [10426.886597] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576901 (offset 0 size 8192 starting block 5363628) [10426.886613] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576902 (offset 0 size 12288 starting block 5363631) [10426.886632] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576907 (offset 0 size 36864 starting block 5363640) [10426.886662] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576908 (offset 0 size 40960 starting block 5363650) [10426.886689] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576909 (offset 0 size 16384 starting block 5363654) [10426.886709] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576912 (offset 0 size 65536 starting block 5363670) [10426.886749] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576916 (offset 0 size 53248 starting block 5363683) [10426.886782] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1576917 (offset 0 size 61440 starting block 5363698) [10426.886819] EXT4-fs warning (device sda1): ext4_end_bio:323: I/O error 10 writing to inode 1703951 (offset 0 size 36864 starting block 5363707) [10426.887083] ata1: EH complete [10429.588693] ata1.00: exception Emask 0x0 SAct 0x200fc00 SErr 0x0 action 0x0 [10429.588713] ata1.00: irq_stat 0x40000008 [10429.588727] ata1.00: failed command: WRITE FPDMA QUEUED [10429.588750] ata1.00: cmd 61/10:c8:60:c2:8e/05:00:02:00:00/40 tag 25 ncq dma 663552 out res 41/10:00:f0:c6:8e/00:00:02:00:00/40 Emask 0x481 (invalid argument) [10429.588763] ata1.00: status: { DRDY ERR } [10429.588771] ata1.00: error: { IDNF } [10429.598045] ata1.00: configured for UDMA/100 [10429.598173] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10429.598184] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] [10429.598194] sd 1:0:0:0: [sda] tag#25 Add. Sense: Logical block address out of range [10429.598206] sd 1:0:0:0: [sda] tag#25 CDB: Write(10) 2a 00 02 8e c2 60 00 05 10 00 [10429.598213] print_req_error: I/O error, dev sda, sector 42910304 [10429.598652] ata1: EH complete [10434.426848] JBD2: Detected IO errors while flushing file data on sda1-8 [10536.832528] ata1.00: exception Emask 0x0 SAct 0x200 SErr 0x0 action 0x0 [10536.832548] ata1.00: irq_stat 0x40000008 [10536.832560] ata1.00: failed command: READ FPDMA QUEUED [10536.832583] ata1.00: cmd 60/90:48:50:5c:65/00:00:00:00:00/40 tag 9 ncq dma 73728 in res 41/40:00:a0:5c:65/00:00:00:00:00/40 Emask 0x409 (media error) [10536.832595] ata1.00: status: { DRDY ERR } [10536.832603] ata1.00: error: { UNC } [10536.842654] ata1.00: configured for UDMA/100 [10536.842728] sd 1:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10536.842739] sd 1:0:0:0: [sda] tag#9 Sense Key : Medium Error [current] [10536.842749] sd 1:0:0:0: [sda] tag#9 Add. Sense: Unrecovered read error - auto reallocate failed [10536.842760] sd 1:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 00 65 5c 50 00 00 90 00 [10536.842767] print_req_error: I/O error, dev sda, sector 6642848 [10536.842931] ata1: EH complete [10610.897463] SGI XFS with ACLs, security attributes, realtime, no debug enabled [10610.986385] JFS: nTxBlock = 8192, nTxLock = 65536 [10611.055950] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [10611.174303] QNX4 filesystem 0.2.3 registered. [10611.294827] raid6: sse2x1 gen() 1035 MB/s [10611.342791] raid6: sse2x1 xor() 943 MB/s [10611.390772] raid6: sse2x2 gen() 1221 MB/s [10611.438786] raid6: sse2x2 xor() 1026 MB/s [10611.486800] raid6: sse2x4 gen() 1759 MB/s [10611.534794] raid6: sse2x4 xor() 1069 MB/s [10611.534799] raid6: using algorithm sse2x4 gen() 1759 MB/s [10611.534801] raid6: .... xor() 1069 MB/s, rmw enabled [10611.534804] raid6: using ssse3x2 recovery algorithm [10611.552101] xor: measuring software checksum speed [10611.590778] prefetch64-sse: 1514.000 MB/sec [10611.630774] generic_sse: 1438.000 MB/sec [10611.630780] xor: using function: prefetch64-sse (1514.000 MB/sec) [10611.808500] Btrfs loaded, crc32c=crc32c-generic [10652.655024] kauditd_printk_skb: 11 callbacks suppressed [10652.655032] audit: type=1400 audit(1615153048.723:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=28406 comm="apparmor_parser" [10652.676106] audit: type=1400 audit(1615153048.743:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=28406 comm="apparmor_parser" [10712.450336] ata1.00: exception Emask 0x0 SAct 0x30000 SErr 0x0 action 0x0 [10712.450355] ata1.00: irq_stat 0x40000008 [10712.450369] ata1.00: failed command: READ FPDMA QUEUED [10712.450392] ata1.00: cmd 60/48:80:78:95:8e/00:00:02:00:00/40 tag 16 ncq dma 36864 in res 41/40:00:90:95:8e/00:00:02:00:00/40 Emask 0x409 (media error) [10712.450404] ata1.00: status: { DRDY ERR } [10712.450412] ata1.00: error: { UNC } [10712.459941] ata1.00: configured for UDMA/100 [10712.460002] sd 1:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10712.460013] sd 1:0:0:0: [sda] tag#16 Sense Key : Medium Error [current] [10712.460022] sd 1:0:0:0: [sda] tag#16 Add. Sense: Unrecovered read error - auto reallocate failed [10712.460034] sd 1:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 02 8e 95 78 00 00 48 00 [10712.460040] print_req_error: I/O error, dev sda, sector 42898832 [10712.460207] ata1: EH complete [10715.906514] ata1.00: exception Emask 0x0 SAct 0x2000 SErr 0x0 action 0x0 [10715.906533] ata1.00: irq_stat 0x40000008 [10715.906546] ata1.00: failed command: READ FPDMA QUEUED [10715.906569] ata1.00: cmd 60/60:68:68:8f:8e/00:00:02:00:00/40 tag 13 ncq dma 49152 in res 41/40:00:80:8f:8e/00:00:02:00:00/40 Emask 0x409 (media error) [10715.906581] ata1.00: status: { DRDY ERR } [10715.906589] ata1.00: error: { UNC } [10715.917022] ata1.00: configured for UDMA/100 [10715.917080] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10715.917091] sd 1:0:0:0: [sda] tag#13 Sense Key : Medium Error [current] [10715.917101] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unrecovered read error - auto reallocate failed [10715.917112] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 02 8e 8f 68 00 00 60 00 [10715.917119] print_req_error: I/O error, dev sda, sector 42897280 [10715.917246] ata1: EH complete [10726.650289] ata1.00: exception Emask 0x0 SAct 0x18 SErr 0x0 action 0x0 [10726.650308] ata1.00: irq_stat 0x40000008 [10726.650320] ata1.00: failed command: READ FPDMA QUEUED [10726.650343] ata1.00: cmd 60/88:18:78:d2:72/00:00:00:00:00/40 tag 3 ncq dma 69632 in res 41/40:00:e8:d2:72/00:00:00:00:00/40 Emask 0x409 (media error) [10726.650355] ata1.00: status: { DRDY ERR } [10726.650363] ata1.00: error: { UNC } [10726.660228] ata1.00: configured for UDMA/100 [10726.660288] sd 1:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10726.660299] sd 1:0:0:0: [sda] tag#3 Sense Key : Medium Error [current] [10726.660309] sd 1:0:0:0: [sda] tag#3 Add. Sense: Unrecovered read error - auto reallocate failed [10726.660320] sd 1:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 72 d2 78 00 00 88 00 [10726.660327] print_req_error: I/O error, dev sda, sector 7525096 [10726.660457] ata1: EH complete [10730.026209] ata1.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x0 [10730.026228] ata1.00: irq_stat 0x40000008 [10730.026242] ata1.00: failed command: READ FPDMA QUEUED [10730.026265] ata1.00: cmd 60/08:e0:e8:d2:72/00:00:00:00:00/40 tag 28 ncq dma 4096 in res 41/40:00:e8:d2:72/00:00:00:00:00/40 Emask 0x409 (media error) [10730.026277] ata1.00: status: { DRDY ERR } [10730.026285] ata1.00: error: { UNC } [10730.035835] ata1.00: configured for UDMA/100 [10730.035892] sd 1:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10730.035904] sd 1:0:0:0: [sda] tag#28 Sense Key : Medium Error [current] [10730.035914] sd 1:0:0:0: [sda] tag#28 Add. Sense: Unrecovered read error - auto reallocate failed [10730.035925] sd 1:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 00 72 d2 e8 00 00 08 00 [10730.035932] print_req_error: I/O error, dev sda, sector 7525096 [10730.036060] ata1: EH complete [10744.617668] ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0 [10744.617689] ata1.00: irq_stat 0x40000008 [10744.617702] ata1.00: failed command: READ FPDMA QUEUED [10744.617726] ata1.00: cmd 60/08:28:e8:d2:72/00:00:00:00:00/40 tag 5 ncq dma 4096 in res 41/40:00:e8:d2:72/00:00:00:00:00/40 Emask 0x409 (media error) [10744.617738] ata1.00: status: { DRDY ERR } [10744.617746] ata1.00: error: { UNC } [10744.627314] ata1.00: configured for UDMA/100 [10744.627361] sd 1:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10744.627368] sd 1:0:0:0: [sda] tag#5 Sense Key : Medium Error [current] [10744.627375] sd 1:0:0:0: [sda] tag#5 Add. Sense: Unrecovered read error - auto reallocate failed [10744.627383] sd 1:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 00 72 d2 e8 00 00 08 00 [10744.627388] print_req_error: I/O error, dev sda, sector 7525096 [10744.627481] ata1: EH complete