[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000047ef0000 (usable)
[    0.000000]  BIOS-e820: 0000000047ef0000 - 0000000047eff000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000047eff000 - 0000000047f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000047f00000 - 0000000050000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 254MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f8130
[    0.000000] Entering add_active_range(0, 0, 294640) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   294640
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   294640
[    0.000000] On node 0 totalpages: 294640
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 509 pages used for memmap
[    0.000000]   HighMem zone: 64755 pages, LIFO batch:15
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F8080 checksum 0
[    0.000000] ACPI: RSDP 000F8080, 0014 (r0 HP    )
[    0.000000] ACPI: RSDT 47EF8BF0, 0034 (r1 HP     3096     20040323  LTP        0)
[    0.000000] ACPI: FACP 47EFEE4B, 0074 (r1 HP     3096     20040323 PTL        5F)
[    0.000000] ACPI: DSDT 47EF8C24, 6227 (r1 HP     3091     20040323 MSFT  100000E)
[    0.000000] ACPI: FACS 47EFFFC0, 0040
[    0.000000] ACPI: SSDT 47EFEEBF, 00B5 (r1 PTLTD  POWERNOW 20040323  LTP        1)
[    0.000000] ACPI: APIC 47EFEF74, 0050 (r1 PTLTD  	 3096   20040323  LTP        0)
[    0.000000] ACPI: MCFG 47EFEFC4, 003C (r1 PTLTD    MCFG   20040323  LTP        0)
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[    0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 292339
[    0.000000] Kernel command line: root=UUID=a4f0447c-68c2-4451-b5c2-25ee05496799 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1591.978 MHz processor.
[   24.138885] Console: colour VGA+ 80x25
[   24.138889] console [tty0] enabled
[   24.139414] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   24.140493] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   24.181672] Memory: 1153920k/1178560k available (2157k kernel code, 23684k reserved, 998k data, 364k init, 261056k highmem)
[   24.181683] virtual kernel memory layout:
[   24.181684]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   24.181685]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   24.181687]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   24.181688]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   24.181690]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   24.181691]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[   24.181692]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[   24.181696] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   24.181747] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   24.261747] Calibrating delay using timer specific routine.. 3187.27 BogoMIPS (lpj=6374547)
[   24.261785] Security Framework initialized
[   24.261793] SELinux:  Disabled at boot.
[   24.261815] AppArmor: AppArmor initialized
[   24.261820] Failure registering capabilities with primary security module.
[   24.261830] Mount-cache hash table entries: 512
[   24.261993] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[   24.262004] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   24.262007] CPU: L2 Cache: 256K (64 bytes/line)
[   24.262010] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[   24.262024] Compat vDSO mapped to ffffe000.
[   24.262038] Checking 'hlt' instruction... OK.
[   24.278092] SMP alternatives: switching to UP code
[   24.279451] Freeing SMP alternatives: 11k freed
[   24.279599] Early unpacking initramfs... done
[   24.737418] ACPI: Core revision 20070126
[   24.737511] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   24.741724] CPU0: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 02
[   24.741749] Total of 1 processors activated (3187.27 BogoMIPS).
[   24.741927] ENABLING IO-APIC IRQs
[   24.742124] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   24.889579] Brought up 1 CPUs
[   24.889606] CPU0 attaching sched-domain:
[   24.889609]  domain 0: span 01
[   24.889611]   groups: 01
[   24.889806] net_namespace: 64 bytes
[   24.889814] Booting paravirtualized kernel on bare hardware
[   24.890345] Time: 10:32:08  Date: 04/19/08
[   24.890377] NET: Registered protocol family 16
[   24.890562] EISA bus registered
[   24.890587] ACPI: bus type pci registered
[   24.890804] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5
[   24.890806] PCI: Using configuration type 1
[   24.890808] Setting up standard PCI resources
[   24.893313] ACPI: EC: Look up EC in DSDT
[   24.895062] ACPI: Interpreter enabled
[   24.895066] ACPI: (supports S0 S3 S4 S5)
[   24.895078] ACPI: Using IOAPIC for interrupt routing
[   24.899834] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[   24.899839] ACPI: EC: driver started in poll mode
[   24.899877] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   24.901140] PCI: Transparent bridge - 0000:00:14.4
[   24.901226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   24.901382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   24.901505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   24.903545] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[   24.903655] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[   24.903761] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[   24.903866] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[   24.903972] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[   24.904076] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[   24.904181] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[   24.904286] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[   24.904409] Linux Plug and Play Support v0.97 (c) Adam Belay
[   24.904441] pnp: PnP ACPI init
[   24.904450] ACPI: bus type pnp registered
[   24.906877] pnp: PnP ACPI: found 10 devices
[   24.906881] ACPI: ACPI bus type pnp unregistered
[   24.906885] PnPBIOS: Disabled by ACPI PNP
[   24.907603] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   24.907835] PCI: Using ACPI for IRQ routing
[   24.907838] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   24.937521] NET: Registered protocol family 8
[   24.937523] NET: Registered protocol family 20
[   24.937594] AppArmor: AppArmor Filesystem Enabled
[   24.941511] Time: tsc clocksource has been installed.
[   24.949546] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[   24.949549] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[   24.949553] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[   24.949562] system 00:08: ioport range 0x1080-0x1080 has been reserved
[   24.949566] system 00:08: ioport range 0x220-0x22f has been reserved
[   24.949569] system 00:08: ioport range 0x40b-0x40b has been reserved
[   24.949572] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   24.949574] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[   24.949577] system 00:08: ioport range 0x530-0x537 has been reserved
[   24.949580] system 00:08: ioport range 0xc00-0xc01 has been reserved
[   24.949583] system 00:08: ioport range 0xc14-0xc14 has been reserved
[   24.949586] system 00:08: ioport range 0xc50-0xc52 has been reserved
[   24.949589] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[   24.949592] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[   24.949595] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[   24.949598] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[   24.949601] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[   24.949604] system 00:08: ioport range 0x8000-0x805f has been reserved
[   24.949607] system 00:08: ioport range 0xf40-0xf47 has been reserved
[   24.949611] system 00:08: ioport range 0x87f-0x87f has been reserved
[   24.949618] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[   24.949622] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[   24.949625] system 00:09: iomem range 0x0-0xfff could not be reserved
[   24.980024] PCI: Bridge: 0000:00:01.0
[   24.980026]   IO window: 9000-9fff
[   24.980030]   MEM window: c0100000-c01fffff
[   24.980033]   PREFETCH window: c8000000-cfffffff
[   24.980045] PCI: Bus 6, cardbus bridge: 0000:05:09.0
[   24.980047]   IO window: 0000a400-0000a4ff
[   24.980053]   IO window: 0000a800-0000a8ff
[   24.980059]   PREFETCH window: 60000000-63ffffff
[   24.980065]   MEM window: 64000000-67ffffff
[   24.980071] PCI: Bridge: 0000:00:14.4
[   24.980075]   IO window: a000-afff
[   24.980081]   MEM window: c0200000-c02fffff
[   24.980086]   PREFETCH window: disabled.
[   24.980129] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 16
[   24.980137] PCI: Setting latency timer of device 0000:05:09.0 to 64
[   24.980151] NET: Registered protocol family 2
[   25.017577] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   25.017930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   25.019346] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   25.020064] TCP: Hash tables configured (established 131072 bind 65536)
[   25.020069] TCP reno registered
[   25.029647] checking if image is initramfs... it is
[   25.481321] Switched to high resolution mode on CPU 0
[   25.911740] Freeing initrd memory: 9558k freed
[   25.912401] audit: initializing netlink socket (disabled)
[   25.912418] audit(1208601128.624:1): initialized
[   25.912580] highmem bounce pool size: 64 pages
[   25.914369] VFS: Disk quotas dquot_6.5.1
[   25.914447] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   25.914597] io scheduler noop registered
[   25.914600] io scheduler anticipatory registered
[   25.914602] io scheduler deadline registered
[   25.914613] io scheduler cfq registered (default)
[   25.914621] PCI: MSI quirk detected. MSI deactivated.
[   26.580865] Boot video device is 0000:01:05.0
[   26.581139] isapnp: Scanning for PnP cards...
[   26.935748] isapnp: No Plug & Play device found
[   26.963831] Real Time Clock Driver v1.12ac
[   26.963933] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   26.964469] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 16
[   26.964481] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[   26.965106] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   26.965182] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   26.965281] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   26.967037] serio: i8042 KBD port at 0x60,0x64 irq 1
[   26.967042] serio: i8042 AUX port at 0x60,0x64 irq 12
[   26.972856] mice: PS/2 mouse device common for all mice
[   26.972980] EISA: Probing bus 0 at eisa.0
[   26.972989] Cannot allocate resource for EISA slot 1
[   26.973020] Cannot allocate resource for EISA slot 8
[   26.973022] EISA: Detected 0 cards.
[   26.973025] cpuidle: using governor ladder
[   26.973027] cpuidle: using governor menu
[   26.973137] NET: Registered protocol family 1
[   26.973170] Using IPI No-Shortcut mode
[   26.973209] registered taskstats version 1
[   26.973314]   Magic number: 4:950:527
[   26.973506] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   26.973508] EDD information not available.
[   26.973821] Freeing unused kernel memory: 364k freed
[   27.008688] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   28.291683] fuse init (API version 7.9)
[   28.333460] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   28.333467] ACPI: Processor [CPU0] (supports 8 throttling states)
[   28.335291] ACPI: Thermal Zone [THRM] (60 C)
[   29.322694] usbcore: registered new interface driver usbfs
[   29.322719] usbcore: registered new interface driver hub
[   29.335783] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   29.335791] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   29.352685] usbcore: registered new device driver usb
[   29.363793] ATIIXP: IDE controller (0x1002:0x4376 rev 0x00) at  PCI slot 0000:00:14.1
[   29.363817] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[   29.363828] ATIIXP: not 100% native mode: will probe irqs later
[   29.363839]     ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[   29.363855]     ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[   29.363866] Probing IDE interface ide0...
[   29.428270] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   30.327816] hda: TOSHIBA MK4025GAS, ATA DISK drive
[   30.327859] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   30.327932] hda: UDMA/100 mode selected
[   30.328025] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   30.383378] Probing IDE interface ide1...
[   31.803179] hdc: DW-224E-C, ATAPI CD/DVD-ROM drive
[   31.803223] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[   31.803604] hdc: UDMA/33 mode selected
[   31.803871] ide1 at 0x170-0x177,0x376 on irq 15
[   31.814579] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[   31.814598] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   31.814879] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[   31.814943] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0002000
[   31.816405] SCSI subsystem initialized
[   31.826714] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.826874] usb usb1: configuration #1 chosen from 1 choice
[   31.826898] hub 1-0:1.0: USB hub found
[   31.826905] hub 1-0:1.0: 8 ports detected
[   31.837592] libata version 3.00 loaded.
[   31.930950] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   31.930957] 8139cp 0000:05:00.0: Try the "8139too" driver instead.
[   31.934503] 8139too Fast Ethernet driver 0.9.28
[   31.934581] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[   31.935822] eth0: RealTek RTL8139 at 0xa000, 00:c0:9f:d9:ca:02, IRQ 19
[   31.935825] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   31.998482] hda: max request size: 128KiB
[   31.998665] hda: 78140160 sectors (40007 MB), CHS=65535/16/63
[   31.999812] hda: cache flushes supported
[   31.999851]  hda: hda1 hda2 < hda5 >
[   32.094847] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1654kB Cache
[   32.094856] Uniform CD-ROM driver Revision: 3.20
[   37.757413] kjournald starting.  Commit interval 5 seconds
[   37.757427] EXT3-fs: mounted filesystem with ordered data mode.
[   53.834680] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   54.813426] Linux agpgart interface v0.102
[   55.141287] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   55.194863] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   55.325227] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   55.398057] input: Power Button (FF) as /devices/virtual/input/input3
[   55.421211] ACPI: Power Button (FF) [PWRF]
[   55.421292] input: Power Button (CM) as /devices/virtual/input/input4
[   55.445212] ACPI: Power Button (CM) [PWRB]
[   55.445292] input: Sleep Button (CM) as /devices/virtual/input/input5
[   55.473171] ACPI: Sleep Button (CM) [SLPB]
[   55.473257] input: Lid Switch as /devices/virtual/input/input6
[   55.489441] ACPI: Lid Switch [LID]
[   55.741152] ACPI: WMI-Acer: Mapper loaded
[   55.961066] Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]
[   55.961094] Yenta: Enabling burst memory read transactions
[   55.961101] Yenta: Using CSCINT to route CSC interrupts to PCI
[   55.961103] Yenta: Routing CardBus interrupts to PCI
[   55.961110] Yenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x66
[   56.193659] Yenta: ISA IRQ mask 0x0ee8, PCI irq 16
[   56.193665] Socket status: 30000006
[   56.193669] Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
[   56.193676] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[   56.193680] cs: IO port probe 0xa000-0xafff: clean.
[   56.193919] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[   56.464923] ACPI: AC Adapter [ACAD] (on-line)
[   56.660577] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[   56.693560] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   56.837432] ACPI: Battery Slot [BAT1] (battery present)
[   57.390694] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input8
[   57.416419] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   57.830002] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   57.859080] [fglrx] Maximum main memory to use for locked dma buffers: 1049 MBytes.
[   57.859121] [fglrx] ASYNCIO init succeed!
[   57.859251] [fglrx] PAT is enabled successfully!
[   57.860061] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[   57.955102] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 16
[   57.968198] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 16
[   58.080119] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2160: MC'97 0 converters and GPIO not ready (0x1)
[   59.708833] cs: IO port probe 0x100-0x3af: clean.
[   59.711289] cs: IO port probe 0x3e0-0x4ff: clean.
[   59.712318] cs: IO port probe 0x820-0x8ff: clean.
[   59.713151] cs: IO port probe 0xc00-0xcf7: clean.
[   59.714028] cs: IO port probe 0xa00-0xaff: clean.
[   60.687203] lp: driver loaded but no devices found
[   60.758973] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[   60.960927] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[   60.961196] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 20
[   60.969944] ndiswrapper: using IRQ 20
[   61.360601] wlan0: ethernet device 00:14:a5:19:bb:5e using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4318.5.conf
[   61.360658] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   61.360732] usbcore: registered new interface driver ndiswrapper
[   61.460957] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[   61.461070] udev: renamed network interface wlan0 to eth1
[   62.160741] EXT3 FS on hda5, internal journal
[   63.683155] ip_tables: (C) 2000-2006 Netfilter Core Team
[   64.251408] No dock devices found.
[   64.725045] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (1 cpu cores) (version 2.20.00)
[   64.725083] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0xa
[   64.725086] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x13
[   66.467239] eth0: link down
[   66.758650] ppdev: user-space parallel port driver
[   67.067087] audit(1208615570.648:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5145 profile="/usr/sbin/cupsd" namespace="default"
[   67.184398] NET: Registered protocol family 10
[   67.184644] lo: Disabled Privacy Extensions
[   67.185079] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   67.185285] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   67.314718] apm: BIOS not found.
[  142.099881] Marking TSC unstable due to: cpufreq changes.
[  142.104681] Time: acpi_pm clocksource has been installed.
[  142.278441] Bluetooth: Core ver 2.11
[  142.279111] NET: Registered protocol family 31
[  142.279117] Bluetooth: HCI device and connection manager initialized
[  142.279124] Bluetooth: HCI socket layer initialized
[  142.411142] Bluetooth: L2CAP ver 2.9
[  142.411149] Bluetooth: L2CAP socket layer initialized
[  142.465068] Bluetooth: RFCOMM socket layer initialized
[  142.465093] Bluetooth: RFCOMM TTY layer initialized
[  142.465098] Bluetooth: RFCOMM ver 1.8
[  142.510944] Clocksource tsc unstable (delta = -205711907 ns)
[  145.109896] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 16
[   74.783871] [fglrx] GART Table is not in FRAME_BUFFER range 
[   74.783882] [fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[   74.783886] [fglrx] Reserve Block - 1 offset =  0X7ff5000 length = 0Xb000
[   74.916733] [fglrx] interrupt source 20008000 successfully enabled
[   74.916739] [fglrx] enable ID = 0x00000004
[   74.916749] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[  167.325288] NET: Registered protocol family 17
[  103.094035] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  119.027601] eth1: no IPv6 routers present
[ 1266.677168] ndiswrapper (mp_reset:62): eth1 is being reset
[ 1420.868114] cdrom: This disc doesn't have any tracks I recognize!