[ 0.000] Linux version 2.6.2-5-generic (buildd@vernadsky) (gcc version 4.2.3 2001 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 2 1:4:2 UTC 20 (Ubuntu 2.6.2-5.8-generic) [ 0.000] BIOS-provided physical RAM map: [ 0.000] BIOS-e80: 00000000 - 000000f40 (usable) [ 0.000] BIOS-e80: 000000f40 - 000000a00 (reserved) [ 0.000] BIOS-e80: 000000f00 - 00000100 (reserved) [ 0.000] BIOS-e80: 00000100 - 00007fee00 (usable) [ 0.000] BIOS-e80: 00007fee00 - 00007fee30 (ACPI NVS) [ 0.000] BIOS-e80: 00007fee30 - 00007fef00 (ACPI data) [ 0.000] BIOS-e80: 00007fef00 - 00007ff000 (reserved) [ 0.000] BIOS-e80: 0000f0000 - 0000f4000 (reserved) [ 0.000] BIOS-e80: 0000fec000 - 00000000 (reserved) [ 0.000] 15MB HIGHMEM available. [ 0.000] 86MB LOWMEM available. [ 0.000] found SMP MP-table at 00f3b9 [ 0.000] Entering add_active_range(0, 0, 540) 0 entries of 26 used [ 0.000] Zone PFN ranges: [ 0.000] DMA 0 -> 49 [ 0.000] Normal 49 -> 297 [ 0.000] HighMem 297 -> 540 [ 0.000] Movable zone start PFN for each node [ 0.000] early_node_map[1] active PFN ranges [ 0.000] 0: 0 -> 540 [ 0.000] On node 0 totalpages: 540 [ 0.000] DMA zone: 3 pages used for memmap [ 0.000] DMA zone: 0 pages reserved [ 0.000] DMA zone: 46 pages, LIFO batch:0 [ 0.000] Normal zone: 16 pages used for memmap [ 0.000] Normal zone: 232 pages, LIFO batch:3 [ 0.000] HighMem zone: 20 pages used for memmap [ 0.000] HighMem zone: 222 pages, LIFO batch:3 [ 0.000] Movable zone: 0 pages used for memmap [ 0.000] DMI 2.4 present. [ 0.000] ACPI: RSDP signature @ 0xC0F7A8 checksum 0 [ 0.000] ACPI: RSDP 00F7A8, 01 (r0 Nvidia) [ 0.000] ACPI: RSDT 7FEE30, 03 (r1 Nvidia NVDAACPI 432E3 NVDA 0) [ 0.000] ACPI: FACP 7FEE38, 07 (r1 Nvidia NVDAACPI 432E3 NVDA 0) [ 0.000] ACPI Warning (tbfadt-04): Optional field "Pm2ControlBlock" has zero address or length: 00000000/1 [2002] [ 0.000] ACPI: DSDT 7FEE30, 6D3E (r1 NVIDIA NVDAACPI 10 MSFT 3000) [ 0.000] ACPI: FACS 7FEE00, 04 [ 0.000] ACPI: SSDT 7FEE9EC0, 04 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000] ACPI: HPET 7FEEA10, 03 (r1 Nvidia NVDAACPI 432E3 NVDA 9) [ 0.000] ACPI: MCFG 7FEEA10, 03C (r1 Nvidia NVDAACPI 432E3 NVDA 0) [ 0.000] ACPI: APIC 7FEE9E4, 07 (r1 Nvidia NVDAACPI 432E3 NVDA 0) [ 0.000] ACPI: PM-Timer IO Port: 0x10 [ 0.000] ACPI: Local APIC address 0xfee000 [ 0.000] ACPI: LAPIC (acpi_id[0x0] lapic_id[0x0] enabled) [ 0.000] Processor #0 1:1 APIC version 1 [ 0.000] ACPI: LAPIC (acpi_id[0x0] lapic_id[0x0] enabled) [ 0.000] Processor #1 1:1 APIC version 1 [ 0.000] ACPI: LAPIC_NMI (acpi_id[0x0] high edge lint[0x1]) [ 0.000] ACPI: LAPIC_NMI (acpi_id[0x0] high edge lint[0x1]) [ 0.000] ACPI: IOAPIC (id[0x0] address[0xfec000] gsi_base[0]) [ 0.000] IOAPIC[0]: apic_id 2, version 1, address 0xfec000, GSI 0-2 [ 0.000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000] ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 high edge) [ 0.000] ACPI: IRQ0 used by override. [ 0.000] ACPI: IRQ2 used by override. [ 0.000] ACPI: IRQ9 used by override. [ 0.000] ACPI: IRQ1 used by override. [ 0.000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000] ACPI: HPET id: 0x1de80 base: 0xfeff00 [ 0.000] Using ACPI (MADT) for SMP configuration information [ 0.000] Allocating PCI resources starting at 8000 (gap: 7ff000:7100) [ 0.000] swsusp: Registered nosave memory region: 000000f00 - 000000a00 [ 0.000] swsusp: Registered nosave memory region: 000000a00 - 000000f00 [ 0.000] swsusp: Registered nosave memory region: 000000f00 - 00000100 [ 0.000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 590 [ 0.000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz -- [ 0.000] mapped APIC to ffffb00 (fee000) [ 0.000] mapped IOAPIC to ffffa00 (fec000) [ 0.000] Enabling fast FPU save and restore... done. [ 0.000] Enabling unmasked SIMD FPU exception support... done. [ 0.000] Initializing CPU#0 [ 0.000] PID hash table entries: 49 (order: 1, 134 bytes) [ 0.000] Detected 21.74 MHz processor. [ 3.426] spurious 85A interrupt: IRQ7. [ 3.447] Console: colour VGA+ 8x2 [ 3.447] console [tty0] enabled [ 3.464] Dentry cache hash table entries: 117 (order: 7, 548 bytes) [ 3.478] Inode-cache hash table entries: 656 (order: 6, 224 bytes) [ 3.576] Memory: 2678k/2900k available (25k kernel code, 216k reserved, 92k data, 34k init, 1746k highmem) [ 3.572] virtual kernel memory layout: [ 3.572] fixmap : 0xfff4b00 - 0xfffff00 ( 70 kB) [ 3.572] pkmap : 0xff800 - 0xffc000 (49 kB) [ 3.572] vmalloc : 0xf8000 - 0xff7fe00 ( 11 MB) [ 3.572] lowmem : 0xc0000 - 0xf8000 ( 86 MB) [ 3.572] .init : 0xc0100 - 0xc0700 ( 34 kB) [ 3.573] .data : 0xc01bb5d - 0xc01dc4 ( 92 kB) [ 3.573] .text : 0xc0000 - 0xc01bb5d (25 kB) [ 3.572] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 3.572] SLUB: Genslabs=1, HWalign=6, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 3.588] hpet clockevent registered [ 3.686] Calibrating delay using timer specific routine.. 42.8 BogoMIPS (lpj=9569) [ 3.685] Security Framework initialized [ 3.689] SELinux: Disabled at boot. [ 3.683] AppArmor: AppArmor initialized [ 3.687] Failure registering capabilities with primary security module. [ 3.682] Mount-cache hash table entries: 52 [ 3.685] CPU: After generic identify, caps: 18bfbff ebd3fbff 0000 0000 0020 0000 0001f 0000 [ 3.685] CPU: L1 I Cache: 6K (6 bytes/line), D cache 6K (6 bytes/line) [ 3.689] CPU: L2 Cache: 52K (6 bytes/line) [ 3.683] CPU 0(2) -> Core 0 [ 3.687] CPU: After all inits, caps: 18bfbff ebd3fbff 0000 0001 0020 0000 0001f 0000 [ 3.687] Compat vDSO mapped to ffffe00. [ 3.682] Checking 'hlt' instruction... OK. [ 3.640] SMP alternatives: switching to UP code [ 3.659] Early unpacking initramfs... done [ 3.939] ACPI: Core revision 2002 [ 3.938] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 3.979] CPU0: AMD Athlon(tm) 6 X2 Dual Core Processor 40+ stepping 0 [ 3.970] SMP alternatives: switching to SMP code [ 3.970] Booting processor 1/1 eip 30 [ 3.977] Initializing CPU#1 [ 3.054] Calibrating delay using timer specific routine.. 42.3 BogoMIPS (lpj=9467) [ 3.055] CPU: After generic identify, caps: 18bfbff ebd3fbff 0000 0000 0020 0000 0001f 0000 [ 3.055] CPU: L1 I Cache: 6K (6 bytes/line), D cache 6K (6 bytes/line) [ 3.056] CPU: L2 Cache: 52K (6 bytes/line) [ 3.056] CPU 1(2) -> Core 1 [ 3.056] CPU: After all inits, caps: 18bfbff ebd3fbff 0000 0001 0020 0000 0001f 0000 [ 3.063] CPU1: AMD Athlon(tm) 6 X2 Dual Core Processor 40+ stepping 0 [ 3.061] Total of 2 processors activated (94.1 BogoMIPS). [ 3.068] ENABLING IO-APIC IRQs [ 3.064] ..TIMER: vector=0x3 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 3.134] Brought up 2 CPUs [ 3.142] CPU0 attaching sched-domain: [ 3.142] domain 0: span 0 [ 3.142] groups: 0 0 [ 3.142] CPU1 attaching sched-domain: [ 3.142] domain 0: span 0 [ 3.142] groups: 0 0 [ 3.148] net_namespace: 6 bytes [ 3.142] Booting paravirtualized kernel on bare hardware [ 3.147] Time: 1:3:0 Date: 0/0/0 [ 3.145] NET: Registered protocol family 1 [ 3.142] EISA bus registered [ 3.146] ACPI: bus type pci registered [ 3.108] PCI: PCI BIOS revision 3.0 entry at 0xfa20, last bus=5 [ 3.102] PCI: Using configuration type 1 [ 3.106] Setting up standard PCI resources [ 3.130] ACPI: EC: Look up EC in DSDT [ 3.182] ACPI: Interpreter enabled [ 3.186] ACPI: (supports S0 S3 S4 S5) [ 3.180] ACPI: Using IOAPIC for interrupt routing [ 3.163] ACPI: PCI Root Bridge [PCI0] (00:0) [ 3.172] PCI: Transparent bridge - 00:0:0.0 [ 3.175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 3.179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 3.222] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.220] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *1 1 1 1) [ 3.231] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.238] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.246] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.243] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 1 1 1 1) [ 3.244] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.251] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 1 *1 1 1) [ 3.252] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.260] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *1 1 1 1) [ 3.261] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 1 *1 1 1) [ 3.272] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 1 1 1 1) *0 [ 3.276] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 1 1 1 1) *0 [ 3.281] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 1 1 1 *1) [ 3.282] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 1 1 1 1) [ 3.283] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.290] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 1 1 1 1) [ 3.292] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 1 1 1 1) *0, disabled. [ 3.209] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 1 *1 1 1) [ 3.203] ACPI: PCI Interrupt Link [APC1] (IRQs 1) *0, disabled. [ 3.207] ACPI: PCI Interrupt Link [APC2] (IRQs 1) *0 [ 3.218] ACPI: PCI Interrupt Link [APC3] (IRQs 1) *0, disabled. [ 3.211] ACPI: PCI Interrupt Link [APC4] (IRQs 1) *0, disabled. [ 3.215] ACPI: PCI Interrupt Link [APC5] (IRQs 1) *0, disabled. [ 3.229] ACPI: PCI Interrupt Link [APC6] (IRQs 1) *0 [ 3.220] ACPI: PCI Interrupt Link [APC7] (IRQs 1) *0, disabled. [ 3.223] ACPI: PCI Interrupt Link [APC8] (IRQs 1) *0 [ 3.234] ACPI: PCI Interrupt Link [AUBA] (IRQs 2 2 2 2) *0 [ 3.233] ACPI: PCI Interrupt Link [AUB2] (IRQs 2 2 2 2) *0 [ 3.242] ACPI: PCI Interrupt Link [AU1B] (IRQs 2 2 2 2) *0 [ 3.240] ACPI: PCI Interrupt Link [AU2B] (IRQs 2 2 2 2) *0 [ 3.249] ACPI: PCI Interrupt Link [APCH] (IRQs 2 2 2 2) *0 [ 3.257] ACPI: PCI Interrupt Link [APMU] (IRQs 2 2 2 2) *0, disabled. [ 3.259] ACPI: PCI Interrupt Link [AAZA] (IRQs 2 2 2 2) *0 [ 3.258] ACPI: PCI Interrupt Link [APCS] (IRQs 2 2 2 2) *0 [ 3.266] ACPI: PCI Interrupt Link [APCM] (IRQs 2 2 2 2) *0, disabled. [ 3.268] ACPI: PCI Interrupt Link [APCZ] (IRQs 2 2 2 2) *0, disabled. [ 3.279] ACPI: PCI Interrupt Link [APSI] (IRQs 2 2 2 2) *0 [ 3.271] Linux Plug and Play Support v0.9 (c) Adam Belay [ 3.277] pnp: PnP ACPI init [ 3.271] ACPI: bus type pnp registered [ 3.228] pnp: PnP ACPI: found 1 devices [ 3.222] ACPI: ACPI bus type pnp unregistered [ 3.226] PnPBIOS: Disabled by ACPI PNP [ 3.226] PCI: Using ACPI for IRQ routing [ 3.220] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 3.330] NET: Registered protocol family 8 [ 3.334] NET: Registered protocol family 2 [ 3.330] hpet0: at MMIO 0xfeff00, IRQs 2, 8, 3 [ 3.344] hpet0: 3 3-bit timers, 2000 Hz [ 3.351] AppArmor: AppArmor Filesystem Enabled [ 3.379] Time: hpet clocksource has been installed. [ 3.374] Switched to high resolution mode on CPU 0 [ 3.371] Switched to high resolution mode on CPU 1 [ 3.358] system 0:0: ioport range 0x10-0x17f has been reserved [ 3.352] system 0:0: ioport range 0x18-0x1ff has been reserved [ 3.356] system 0:0: ioport range 0x10-0x17f has been reserved [ 3.350] system 0:0: ioport range 0x18-0x1ff has been reserved [ 3.354] system 0:0: ioport range 0x10-0x17f has been reserved [ 3.364] system 0:0: ioport range 0x18-0x1ff has been reserved [ 3.368] system 0:0: iomem range 0x0-0x0 could not be reserved [ 3.362] system 0:0: ioport range 0x4d0-0x4d1 has been reserved [ 3.366] system 0:0: ioport range 0x20-0x3f has been reserved [ 3.370] system 0:0b: iomem range 0xf0000-0xf3ffffff could not be reserved [ 3.375] system 0:0c: iomem range 0xf00-0xfffff could not be reserved [ 3.379] system 0:0c: iomem range 0xfeff00-0xfeff0ff could not be reserved [ 3.374] system 0:0c: iomem range 0x7fee00-0x7fefffff could not be reserved [ 3.379] system 0:0c: iomem range 0xffff00-0xffffffff could not be reserved [ 3.374] system 0:0c: iomem range 0x0-0x9ffff could not be reserved [ 3.378] system 0:0c: iomem range 0x100-0x7fedffff could not be reserved [ 3.372] system 0:0c: iomem range 0xfec000-0xfec0fff could not be reserved [ 3.377] system 0:0c: iomem range 0xfee000-0xfeefffff could not be reserved [ 3.372] system 0:0c: iomem range 0xfefff00-0xfeffffff could not be reserved [ 3.377] system 0:0c: iomem range 0xfff800-0xfff8fff could not be reserved [ 3.372] system 0:0c: iomem range 0xfff900-0xfffbffff could not be reserved [ 3.376] system 0:0c: iomem range 0xfffed00-0xfffeffff could not be reserved [ 3.374] PCI: Bridge: 00:0:0.0 [ 3.377] IO window: c00-cfff [ 3.381] MEM window: fde000-fdefffff [ 3.385] PREFETCH window: fdf000-fdffffff [ 3.389] PCI: Bridge: 00:0:0b.0 [ 3.383] IO window: b00-bfff [ 3.386] MEM window: fdd000-fddfffff [ 3.380] PREFETCH window: fdc000-fdcfffff [ 3.384] PCI: Bridge: 00:0:0c.0 [ 3.388] IO window: a00-afff [ 3.381] MEM window: fdb000-fdbfffff [ 3.385] PREFETCH window: fda000-fdafffff [ 3.389] PCI: Bridge: 00:0:0d.0 [ 3.383] IO window: 90-9fff [ 3.386] MEM window: f8000-fbffffff [ 3.380] PREFETCH window: e0000-efffffff [ 3.384] PCI: Bridge: 00:0:0e.0 [ 3.388] IO window: 80-8fff [ 3.381] MEM window: fd900-fd9fffff [ 3.385] PREFETCH window: fd800-fd8fffff [ 3.380] PCI: Setting latency timer of device 00:0:0.0 to 6 [ 3.380] PCI: Setting latency timer of device 00:0:0b.0 to 6 [ 3.381] PCI: Setting latency timer of device 00:0:0c.0 to 6 [ 3.382] PCI: Setting latency timer of device 00:0:0d.0 to 6 [ 3.382] PCI: Setting latency timer of device 00:0:0e.0 to 6 [ 3.383] NET: Registered protocol family 2 [ 3.479] IP route cache hash table entries: 378 (order: 5, 117 bytes) [ 3.485] TCP established hash table entries: 117 (order: 8, 1456 bytes) [ 3.487] TCP bind hash table entries: 656 (order: 7, 548 bytes) [ 3.487] TCP: Hash tables configured (established 117 bind 656) [ 3.491] TCP reno registered [ 3.494] checking if image is initramfs... it is [ 3.905] Freeing initrd memory: 79k freed [ 3.904] audit: initializing netlink socket (disabled) [ 3.909] audit(10354.34:1): initialized [ 3.918] highmem bounce pool size: 6 pages [ 3.920] VFS: Disk quotas dquot_6.5.1 [ 3.920] Dquot-cache hash table entries: 12 (order 0, 49 bytes) [ 3.923] io scheduler noop registered [ 3.927] io scheduler anticipatory registered [ 3.921] io scheduler deadline registered [ 3.925] io scheduler cfq registered (default) [ 3.966] Boot video device is 00:0:0.0 [ 3.964] PCI: Setting latency timer of device 00:0:0b.0 to 6 [ 3.966] assign_interrupt_mode Found MSI capability [ 3.961] Allocate Port Service[00:0:0b.0:pcie0] [ 3.967] PCI: Setting latency timer of device 00:0:0c.0 to 6 [ 3.969] assign_interrupt_mode Found MSI capability [ 3.964] Allocate Port Service[00:0:0c.0:pcie0] [ 3.968] PCI: Setting latency timer of device 00:0:0d.0 to 6 [ 3.960] assign_interrupt_mode Found MSI capability [ 3.965] Allocate Port Service[00:0:0d.0:pcie0] [ 3.960] PCI: Setting latency timer of device 00:0:0e.0 to 6 [ 3.962] assign_interrupt_mode Found MSI capability [ 3.967] Allocate Port Service[00:0:0e.0:pcie0] [ 3.964] isapnp: Scanning for PnP cards... [ 3.390] isapnp: No Plug & Play device found [ 3.328] Real Time Clock Driver v1.1ac [ 3.328] hpet_resources: 0xfeff00 is busy [ 3.332] Serial: 85/150 driver $Revision: 1.9 $ 4 ports, IRQ sharing enabled [ 3.337] serial85: ttyS0 at I/O 0x3f8 (irq = 4) is a 150A [ 3.338] 0:0: ttyS0 at I/O 0x3f8 (irq = 4) is a 150A [ 3.343] RAMDISK driver initialized: 1 RAM disks of 656K size 12 blocksize [ 3.343] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.345] PNP: PS/2 Controller [PNP0f1:PS2M] at 0x6,0x6 irq 1 [ 3.349] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 3.377] serio: i84 KBD port at 0x6,0x6 irq 1 [ 3.371] serio: i84 AUX port at 0x6,0x6 irq 1 [ 3.362] mice: PS/2 mouse device common for all mice [ 3.365] EISA: Probing bus 0 at eisa.0 [ 3.360] Cannot allocate resource for EISA slot 1 [ 3.365] Cannot allocate resource for EISA slot 8 [ 3.368] EISA: Detected 0 cards. [ 3.362] cpuidle: using governor ladder [ 3.366] cpuidle: using governor menu [ 3.366] NET: Registered protocol family 1 [ 3.361] Using IPI No-Shortcut mode [ 3.368] registered taskstats version 1 [ 3.360] Magic number: 1:17:67 [ 3.374] Freeing unused kernel memory: 34k freed [ 3.597] fuse init (API version 7.9) [ 3.550] ACPI: Fan [FAN] (on) [ 3.982] ACPI: Thermal Zone [THRM] (4 C) [ 3.323] usbcore: registered new interface driver usbfs [ 3.329] usbcore: registered new interface driver hub [ 3.335] usbcore: registered new device driver usb [ 3.342] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 2 [ 3.347] ACPI: PCI Interrupt 00:0:0.1[B] -> Link [AUB2] -> GSI 2 (level, low) -> IRQ 1 [ 3.351] PCI: Setting latency timer of device 00:0:0.1 to 6 [ 3.351] ehci_hcd 00:0:0.1: EHCI Host Controller [ 3.357] ehci_hcd 00:0:0.1: new USB bus registered, assigned bus number 1 [ 3.354] ehci_hcd 00:0:0.1: debug port 1 [ 3.358] PCI: cache line size of 6 is not supported by device 00:0:0.1 [ 3.359] ehci_hcd 00:0:0.1: irq 1, io mem 0xfe0e00 [ 3.363] ohci_hcd: 20 August 0 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.460] ehci_hcd 00:0:0.1: USB 2.0 started, EHCI 1.0, driver 1 Dec 20 [ 3.475] usb usb1: configuration #1 chosen from 1 choice [ 3.471] hub 1-0:1.0: USB hub found [ 3.475] hub 1-0:1.0: 1 ports detected [ 3.472] SCSI subsystem initialized [ 3.491] Uniform Multi-Platform E-IDE driver Revision: 7.0alpha2 [ 3.495] ide: Assuming 3MHz system bus speed for PIO modes; override with idebus=xx [ 3.437] libata version 3.0 loaded. [ 3.513] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 2 [ 3.518] ACPI: PCI Interrupt 00:0:0.0[A] -> Link [AUBA] -> GSI 2 (level, low) -> IRQ 1 [ 3.519] PCI: Setting latency timer of device 00:0:0.0 to 6 [ 3.519] ohci_hcd 00:0:0.0: OHCI Host Controller [ 3.515] ohci_hcd 00:0:0.0: new USB bus registered, assigned bus number 2 [ 3.511] ohci_hcd 00:0:0.0: irq 1, io mem 0xfe0f00 [ 3.585] Floppy drive(s): fd0 is 1.4M [ 3.582] FDC 0 is a post-19 807 [ 3.580] usb usb2: configuration #1 chosen from 1 choice [ 3.586] hub 2-0:1.0: USB hub found [ 3.590] hub 2-0:1.0: 1 ports detected [ 3.653] NFORCE-MCP6: IDE controller (0x1de:0x04 rev 0xa1) at PCI slot 00:0:0.0 [ 3.650] NFORCE-MCP6: not 10% native mode: will probe irqs later [ 3.654] NFORCE-MCP6: 00:0:0.0 (rev a1) UDMA13 controller [ 3.659] ide0: BM-DMA at 0xec0-0xec0, BIOS settings: hda:DMA, hdb:DMA [ 3.659] NFORCE-MCP6: IDE port disabled [ 3.653] Probing IDE interface ide0... [ 3.982] usb 2-8: new low speed USB device using ohci_hcd and address 2 [ 3.259] usb 2-8: configuration #1 chosen from 1 choice [ 3.225] ahci 00:0:0a.0: version 3.0 [ 3.225] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 2 [ 3.220] ACPI: PCI Interrupt 00:0:0a.0[A] -> Link [APSI] -> GSI 2 (level, low) -> IRQ 1 [ 3.257] usbcore: registered new interface driver hiddev [ 3.285] input: USB Keyboard as /devices/pci00:0/00:0:0.0/usb2/2-8/2-8:1.0/input/input1 [ 3.253] input,hidraw0: USB HID v1.1 Keyboard [ USB Keyboard] on usb-00:0:0.0-8 [ 3.372] input: USB Keyboard as /devices/pci00:0/00:0:0.0/usb2/2-8/2-8:1.1/input/input2 [ 3.351] input,hidraw1: USB HID v1.1 Device [ USB Keyboard] on usb-00:0:0.0-8 [ 3.356] usbcore: registered new interface driver usbhid [ 3.350] /build/buildd/linux-2.6.2/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.261] ahci 00:0:0a.0: AHCI 00.00 3 slots 4 ports 3 Gbps 0xf impl IDE mode [ 3.266] ahci 00:0:0a.0: flags: 6bit sntf led clo pmp pio [ 3.260] PCI: Setting latency timer of device 00:0:0a.0 to 6 [ 3.268] scsi0 : ahci [ 3.266] scsi1 : ahci [ 3.263] scsi2 : ahci [ 3.269] scsi3 : ahci [ 3.268] ata1: SATA max UDMA/13 abar m89@0xfe0a00 port 0xfe0a10 irq 29 [ 3.273] ata2: SATA max UDMA/13 abar m89@0xfe0a00 port 0xfe0a10 irq 29 [ 3.278] ata3: SATA max UDMA/13 abar m89@0xfe0a00 port 0xfe0a20 irq 29 [ 3.273] ata4: SATA max UDMA/13 abar m89@0xfe0a00 port 0xfe0a20 irq 29 [ 3.850] ata1: SATA link up 1.5 Gbps (SStatus 13 SControl 30) [ 3.860] APIC error on CPU0: 0(4) [ 6.823] ata1.0: qc timeout (cmd 0xec) [ 6.828] ata1.0: failed to IDENTIFY (I/O error, err_mask=0x5) [ 6.837] ata1: failed to recover some devices, retrying in 5 secs [ 7.549] ata1: SATA link up 1.5 Gbps (SStatus 13 SControl 30) [ 7.540] APIC error on CPU0: 4(4) [ 15.512] ata1.0: qc timeout (cmd 0xec) [ 15.516] ata1.0: failed to IDENTIFY (I/O error, err_mask=0x5) [ 15.510] ata1: failed to recover some devices, retrying in 5 secs [ 11.128] ata1: SATA link up 1.5 Gbps (SStatus 13 SControl 30) [ 11.138] APIC error on CPU0: 4(4) [ 11.101] ata1.0: qc timeout (cmd 0xec) [ 11.106] ata1.0: failed to IDENTIFY (I/O error, err_mask=0x5) [ 11.100] ata1: failed to recover some devices, retrying in 5 secs [ 16.717] ata1: SATA link up 1.5 Gbps (SStatus 13 SControl 30) [ 17.013] ata2: SATA link down (SStatus 0 SControl 30) [ 17.715] ata3: SATA link up 3.0 Gbps (SStatus 13 SControl 30) [ 17.715] APIC error on CPU0: 4(4) [ 17.780] ata3.0: qc timeout (cmd 0xec) [ 17.784] ata3.0: failed to IDENTIFY (I/O error, err_mask=0x4) [ 17.788] ata3: failed to recover some devices, retrying in 5 secs [ 13.395] ata3: SATA link up 3.0 Gbps (SStatus 13 SControl 30) [ 13.304] APIC error on CPU0: 4(4) [ 23.360] ata3.0: qc timeout (cmd 0xec) [ 23.365] ata3.0: failed to IDENTIFY (I/O error, err_mask=0x4) [ 23.369] ata3: failed to recover some devices, retrying in 5 secs [ 28.986] ata3: SATA link up 3.0 Gbps (SStatus 13 SControl 30) [ 29.086] APIC error on CPU0: 4(4) [ 28.951] ata3.0: qc timeout (cmd 0xec) [ 28.955] ata3.0: failed to IDENTIFY (I/O error, err_mask=0x4) [ 28.959] ata3: failed to recover some devices, retrying in 5 secs [ 24.668] ata3: SATA link up 3.0 Gbps (SStatus 13 SControl 30) [ 24.964] ata4: SATA link down (SStatus 0 SControl 30)