[ 0.000000] Linux version 2.6.24-5-generic (buildd@vernadsky) (gcc version 4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 24 19:45:21 UTC 2008 (Ubuntu 2.6.24-5.8-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe70000 (usable) [ 0.000000] BIOS-e820: 000000007fe70000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6bc0 [ 0.000000] Entering add_active_range(0, 0, 523888) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523888 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523888 [ 0.000000] On node 0 totalpages: 523888 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2300 pages used for memmap [ 0.000000] HighMem zone: 292212 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6AF0 checksum 0 [ 0.000000] ACPI: RSDP 000F6AF0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7FE73582, 008C (r1 Sony VAIO 6040000 PTL 0) [ 0.000000] ACPI: FACP 7FE7BBF8, 00F4 (r3 Sony VAIO 20070412 PTL 1) [ 0.000000] ACPI: DSDT 7FE756F2, 6482 (r1 Sony VAIO 20070412 PTL 20050624) [ 0.000000] ACPI: FACS 7FE7CFC0, 0040 [ 0.000000] ACPI: APIC 7FE7BCEC, 0068 (r1 Sony VAIO 20070412 PTL 5A) [ 0.000000] ACPI: HPET 7FE7BD54, 0038 (r1 Sony VAIO 20070412 PTL 5A) [ 0.000000] ACPI: MCFG 7FE7BD8C, 003C (r1 Sony VAIO 20070412 PTL 5A) [ 0.000000] ACPI: TCPA 7FE7BDC8, 0032 (r1 Sony VAIO 20070412 PTL 5A52) [ 0.000000] ACPI: SLIC 7FE7BDFA, 0176 (r1 Sony VAIO 20070412 PTL 1000000) [ 0.000000] ACPI: APIC 7FE7BF70, 0068 (r1 Sony VAIO 20070412 PTL 0) [ 0.000000] ACPI: BOOT 7FE7BFD8, 0028 (r1 Sony VAIO 20070412 PTL 1) [ 0.000000] ACPI: SSDT 7FE74EDE, 0814 (r1 Sony VAIO 20070412 PTL 20050624) [ 0.000000] ACPI: SSDT 7FE7467D, 0861 (r1 Sony VAIO 20070412 PTL 20050624) [ 0.000000] ACPI: SSDT 7FE73B9A, 025F (r1 Sony VAIO 20070412 PTL 20050624) [ 0.000000] ACPI: SSDT 7FE73AF4, 00A6 (r1 Sony VAIO 20070412 PTL 20050624) [ 0.000000] ACPI: SSDT 7FE7360E, 04E6 (r1 Sony VAIO 20070412 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519796 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2166.999 MHz processor. [ 25.494768] Console: colour VGA+ 80x25 [ 25.494772] console [tty0] enabled [ 25.495037] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 25.495290] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 25.567955] Memory: 2065488k/2095552k available (2158k kernel code, 28868k reserved, 992k data, 364k init, 1178048k highmem) [ 25.567961] virtual kernel memory layout: [ 25.567961] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 25.567962] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 25.567963] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 25.567964] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 25.567965] .init : 0xc0419000 - 0xc0474000 ( 364 kB) [ 25.567966] .data : 0xc031bb5d - 0xc0413dc4 ( 992 kB) [ 25.567966] .text : 0xc0100000 - 0xc031bb5d (2158 kB) [ 25.567969] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.568008] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 25.568133] hpet clockevent registered [ 25.648041] Calibrating delay using timer specific routine.. 4338.54 BogoMIPS (lpj=8677083) [ 25.648063] Security Framework initialized [ 25.648069] SELinux: Disabled at boot. [ 25.648083] AppArmor: AppArmor initialized [ 25.648086] Failure registering capabilities with primary security module. [ 25.648093] Mount-cache hash table entries: 512 [ 25.648211] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 25.648218] monitor/mwait feature present. [ 25.648219] using mwait in idle threads. [ 25.648222] CPU: L1 I cache: 32K, L1 D cache: 32K [ 25.648224] CPU: L2 cache: 4096K [ 25.648227] CPU: Physical Processor ID: 0 [ 25.648228] CPU: Processor Core ID: 0 [ 25.648229] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 25.648237] Compat vDSO mapped to ffffe000. [ 25.648249] Checking 'hlt' instruction... OK. [ 25.664350] SMP alternatives: switching to UP code [ 25.665710] Early unpacking initramfs... done [ 25.936433] ACPI: Core revision 20070126 [ 25.936472] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.942020] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 25.942035] SMP alternatives: switching to SMP code [ 25.942623] Booting processor 1/1 eip 3000 [ 25.953040] Initializing CPU#1 [ 26.031560] Calibrating delay using timer specific routine.. 4333.68 BogoMIPS (lpj=8667362) [ 26.031565] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 26.031570] monitor/mwait feature present. [ 26.031572] CPU: L1 I cache: 32K, L1 D cache: 32K [ 26.031574] CPU: L2 cache: 4096K [ 26.031575] CPU: Physical Processor ID: 0 [ 26.031576] CPU: Processor Core ID: 1 [ 26.031578] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 26.032257] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 26.032278] Total of 2 processors activated (8672.22 BogoMIPS). [ 26.032478] ENABLING IO-APIC IRQs [ 26.032670] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 26.179475] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 26.199468] Brought up 2 CPUs [ 26.199491] CPU0 attaching sched-domain: [ 26.199493] domain 0: span 03 [ 26.199494] groups: 01 02 [ 26.199496] CPU1 attaching sched-domain: [ 26.199498] domain 0: span 03 [ 26.199499] groups: 02 01 [ 26.199705] net_namespace: 64 bytes [ 26.199713] Booting paravirtualized kernel on bare hardware [ 26.200121] Time: 21:15:21 Date: 02/02/08 [ 26.200169] NET: Registered protocol family 16 [ 26.200343] EISA bus registered [ 26.200348] ACPI: bus type pci registered [ 26.200816] PCI: PCI BIOS revision 2.10 entry at 0xfddef, last bus=10 [ 26.200818] PCI: Using configuration type 1 [ 26.200819] Setting up standard PCI resources [ 26.204771] ACPI: EC: Look up EC in DSDT [ 26.206214] ACPI: System BIOS is requesting _OSI(Linux) [ 26.206216] ACPI: If "acpi_osi=Linux" works better, [ 26.206217] Please send dmidecode to linux-acpi@vger.kernel.org [ 26.207995] ACPI: Interpreter enabled [ 26.207997] ACPI: (supports S0 S3 S4 S5) [ 26.208008] ACPI: Using IOAPIC for interrupt routing [ 26.210974] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 26.213108] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 26.213110] ACPI: EC: driver started in interrupt mode [ 26.213151] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 26.213975] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 26.213979] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 26.215469] PCI: Transparent bridge - 0000:00:1e.0 [ 26.215571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 26.215776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 26.215881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 26.215989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 26.216087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 26.216185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 26.216299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 26.223092] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 [ 26.223172] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 26.223250] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 26.223327] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 26.223407] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [ 26.223484] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 26.223561] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 26.223637] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 26.223765] Linux Plug and Play Support v0.97 (c) Adam Belay [ 26.223795] pnp: PnP ACPI init [ 26.223801] ACPI: bus type pnp registered [ 26.225773] pnp: PnP ACPI: found 12 devices [ 26.225775] ACPI: ACPI bus type pnp unregistered [ 26.225778] PnPBIOS: Disabled by ACPI PNP [ 26.225988] PCI: Using ACPI for IRQ routing [ 26.225990] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 26.339331] NET: Registered protocol family 8 [ 26.339333] NET: Registered protocol family 20 [ 26.339366] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 26.339369] hpet0: 3 64-bit timers, 14318180 Hz [ 26.340400] AppArmor: AppArmor Filesystem Enabled [ 26.343179] Time: tsc clocksource has been installed. [ 26.343185] Switched to high resolution mode on CPU 0 [ 26.343285] Switched to high resolution mode on CPU 1 [ 26.367149] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 26.367152] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 26.367154] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 26.367156] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 26.367159] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 26.367161] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 26.367163] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 26.367169] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 26.367174] system 00:06: ioport range 0x680-0x6ff has been reserved [ 26.367176] system 00:06: ioport range 0x800-0x80f has been reserved [ 26.367178] system 00:06: ioport range 0x1000-0x107f has been reserved [ 26.367180] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 26.367182] system 00:06: ioport range 0x1640-0x164f has been reserved [ 26.367184] system 00:06: ioport range 0xfe00-0xfe01 has been reserved [ 26.397565] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 26.397636] PCI: Bridge: 0000:00:01.0 [ 26.397637] IO window: disabled. [ 26.397640] MEM window: cd000000-ceffffff [ 26.397643] PREFETCH window: d0000000-dfffffff [ 26.397646] PCI: Bridge: 0000:00:1c.0 [ 26.397649] IO window: 2000-2fff [ 26.397655] MEM window: f4000000-f5ffffff [ 26.397659] PREFETCH window: f0000000-f1ffffff [ 26.397665] PCI: Bridge: 0000:00:1c.1 [ 26.397666] IO window: disabled. [ 26.397671] MEM window: f8100000-f81fffff [ 26.397675] PREFETCH window: disabled. [ 26.397681] PCI: Bridge: 0000:00:1c.2 [ 26.397684] IO window: 3000-3fff [ 26.397689] MEM window: f8000000-f80fffff [ 26.397693] PREFETCH window: disabled. [ 26.397699] PCI: Bridge: 0000:00:1c.3 [ 26.397702] IO window: 4000-4fff [ 26.397707] MEM window: f6000000-f7ffffff [ 26.397712] PREFETCH window: f2000000-f3ffffff [ 26.397725] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 26.397726] IO window: 00001400-000014ff [ 26.397731] IO window: 00001c00-00001cff [ 26.397736] PREFETCH window: 88000000-8bffffff [ 26.397741] MEM window: 8c000000-8fffffff [ 26.397747] PCI: Bridge: 0000:00:1e.0 [ 26.397748] IO window: disabled. [ 26.397753] MEM window: f8200000-f82fffff [ 26.397757] PREFETCH window: disabled. [ 26.397773] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.397777] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 26.397801] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.397806] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 26.397830] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.397836] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 26.397860] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 26.397865] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 26.397890] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 26.397895] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 26.397909] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 26.397929] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 26.397941] NET: Registered protocol family 2 [ 26.444070] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 26.444244] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 26.444605] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 26.444792] TCP: Hash tables configured (established 131072 bind 65536) [ 26.444794] TCP reno registered [ 26.456108] checking if image is initramfs... it is [ 26.988208] Freeing initrd memory: 7521k freed [ 26.988364] Simple Boot Flag at 0x36 set to 0x1 [ 26.988964] audit: initializing netlink socket (disabled) [ 26.988975] audit(1201986922.297:1): initialized [ 26.989189] highmem bounce pool size: 64 pages [ 26.990922] VFS: Disk quotas dquot_6.5.1 [ 26.990982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 26.991106] io scheduler noop registered [ 26.991108] io scheduler anticipatory registered [ 26.991110] io scheduler deadline registered [ 26.991118] io scheduler cfq registered (default) [ 26.991216] Boot video device is 0000:01:00.0 [ 26.991321] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 26.991355] assign_interrupt_mode Found MSI capability [ 26.991383] Allocate Port Service[0000:00:01.0:pcie00] [ 26.991456] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 26.991516] assign_interrupt_mode Found MSI capability [ 26.991564] Allocate Port Service[0000:00:1c.0:pcie00] [ 26.991595] Allocate Port Service[0000:00:1c.0:pcie02] [ 26.991698] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 26.991759] assign_interrupt_mode Found MSI capability [ 26.991807] Allocate Port Service[0000:00:1c.1:pcie00] [ 26.991836] Allocate Port Service[0000:00:1c.1:pcie02] [ 26.991936] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 26.991997] assign_interrupt_mode Found MSI capability [ 26.992044] Allocate Port Service[0000:00:1c.2:pcie00] [ 26.992073] Allocate Port Service[0000:00:1c.2:pcie02] [ 26.992172] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 26.992233] assign_interrupt_mode Found MSI capability [ 26.992280] Allocate Port Service[0000:00:1c.3:pcie00] [ 26.992309] Allocate Port Service[0000:00:1c.3:pcie02] [ 26.992552] isapnp: Scanning for PnP cards... [ 27.346577] isapnp: No Plug & Play device found [ 27.368195] Real Time Clock Driver v1.12ac [ 27.368409] hpet_resources: 0xfed00000 is busy [ 27.368436] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.369502] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.369559] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 27.369645] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 27.372032] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.372036] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 27.385972] mice: PS/2 mouse device common for all mice [ 27.386070] EISA: Probing bus 0 at eisa.0 [ 27.386077] Cannot allocate resource for EISA slot 1 [ 27.386079] Cannot allocate resource for EISA slot 2 [ 27.386081] Cannot allocate resource for EISA slot 3 [ 27.386082] Cannot allocate resource for EISA slot 4 [ 27.386101] EISA: Detected 0 cards. [ 27.386104] cpuidle: using governor ladder [ 27.386105] cpuidle: using governor menu [ 27.386171] NET: Registered protocol family 1 [ 27.386195] Using IPI No-Shortcut mode [ 27.386223] registered taskstats version 1 [ 27.386325] Magic number: 12:72:297 [ 27.386333] hash matches device ttywe [ 27.386561] Freeing unused kernel memory: 364k freed [ 27.410612] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 28.560120] fuse init (API version 7.9) [ 28.570027] ACPI: SSDT 7FE7437D, 0238 (r1 Sony VAIO 20070412 PTL 20050624) [ 28.570199] ACPI: SSDT 7FE73DF9, 04FF (r1 Sony VAIO 20070412 PTL 20050624) [ 28.571892] Monitor-Mwait will be used to enter C-1 state [ 28.571895] Monitor-Mwait will be used to enter C-2 state [ 28.571982] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 28.571986] ACPI: Processor [CPU0] (supports 8 throttling states) [ 28.572168] ACPI: SSDT 7FE745B5, 00C8 (r1 Sony VAIO 20070412 PTL 20050624) [ 28.572327] ACPI: SSDT 7FE742F8, 0085 (r1 Sony VAIO 20070412 PTL 20050624) [ 28.573232] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 28.573236] ACPI: Processor [CPU1] (supports 8 throttling states) [ 28.576101] ACPI: Thermal Zone [ATF0] (43 C) [ 28.576794] ACPI: Thermal Zone [DTS0] (39 C) [ 28.577505] ACPI: Thermal Zone [DTS1] (39 C) [ 28.898672] usbcore: registered new interface driver usbfs [ 28.898692] usbcore: registered new interface driver hub [ 28.899156] SCSI subsystem initialized [ 28.905185] usbcore: registered new device driver usb [ 28.914040] USB Universal Host Controller Interface driver v3.0 [ 28.914084] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 28.914094] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 28.914099] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 28.914345] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 28.914378] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800 [ 28.914491] usb usb1: configuration #1 chosen from 1 choice [ 28.914513] hub 1-0:1.0: USB hub found [ 28.914517] hub 1-0:1.0: 2 ports detected [ 28.938097] libata version 3.00 loaded. [ 29.017148] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 29.017159] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 29.017163] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 29.017185] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 29.017213] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 29.017307] usb usb2: configuration #1 chosen from 1 choice [ 29.017326] hub 2-0:1.0: USB hub found [ 29.017330] hub 2-0:1.0: 2 ports detected [ 29.120912] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19 [ 29.120921] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 29.120925] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 29.120943] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 29.120970] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840 [ 29.121064] usb usb3: configuration #1 chosen from 1 choice [ 29.121084] hub 3-0:1.0: USB hub found [ 29.121087] hub 3-0:1.0: 2 ports detected [ 29.224773] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19 [ 29.224782] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 29.224786] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 29.224803] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 29.224829] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 29.224920] usb usb4: configuration #1 chosen from 1 choice [ 29.224939] hub 4-0:1.0: USB hub found [ 29.224943] hub 4-0:1.0: 2 ports detected [ 29.327811] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 29.377521] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8205000-f82057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 29.379614] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22 [ 29.379624] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 29.379628] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 29.379649] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 29.383552] ehci_hcd 0000:00:1d.7: debug port 1 [ 29.383559] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 29.383565] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xf8504000 [ 29.463433] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 29.475419] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.475594] usb usb5: configuration #1 chosen from 1 choice [ 29.475635] hub 5-0:1.0: USB hub found [ 29.475644] hub 5-0:1.0: 8 ports detected [ 29.579422] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 23 [ 29.579473] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 29.579493] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 29.579531] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 23 [ 29.579565] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 29.579592] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 29.582020] ata_piix 0000:00:1f.1: version 2.12 [ 29.582031] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 23 [ 29.582053] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 29.582127] scsi0 : ata_piix [ 29.582172] scsi1 : ata_piix [ 29.582574] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 29.582577] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 29.899548] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.50, max UDMA/33 [ 30.071237] ata1.00: configured for UDMA/33 [ 30.071287] ata2: port disabled. ignoring. [ 30.073087] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.50 PQ: 0 ANSI: 5 [ 30.073196] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 30.226522] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 23 [ 30.226567] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 30.226640] scsi2 : ata_piix [ 30.226843] scsi3 : ata_piix [ 30.227496] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18ac bmdma 0x18b0 irq 23 [ 30.227499] ata4: SATA max UDMA/133 cmd 0x18c0 ctl 0x18a8 bmdma 0x18b8 irq 23 [ 30.266460] usb 5-6: new high speed USB device using ehci_hcd and address 3 [ 30.392247] ata3.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133 [ 30.392254] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 30.402410] usb 5-6: configuration #1 chosen from 1 choice [ 30.407028] ata3.00: configured for UDMA/133 [ 30.573404] scsi 2:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5 [ 30.579364] Driver 'sd' needs updating - please use bus_type methods [ 30.579422] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 30.579432] sd 2:0:0:0: [sda] Write Protect is off [ 30.579434] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.579447] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.579488] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 30.579496] sd 2:0:0:0: [sda] Write Protect is off [ 30.579498] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.579511] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.579513] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 30.582013] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.582016] Uniform CD-ROM driver Revision: 3.20 [ 30.582047] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 30.646239] ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603026c3f6c] [ 30.742280] sda1 sda2 [ 30.742396] sd 2:0:0:0: [sda] Attached SCSI disk [ 30.746359] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 30.746374] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 30.881715] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 31.055776] usb 3-1: configuration #1 chosen from 1 choice [ 31.301212] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 31.513215] usb 4-2: configuration #1 chosen from 1 choice [ 34.230719] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 34.301800] ISO 9660 Extensions: RRIP_1991A [ 34.593724] Registering unionfs 1.4 [ 34.593726] unionfs: debugging is not enabled [ 34.599470] loop: module loaded [ 34.903191] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 104.457935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 104.590797] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 104.757243] Linux agpgart interface v0.102 [ 104.885941] iTCO_vendor_support: vendor-support=0 [ 105.544841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 105.949750] input: Lid Switch as /devices/virtual/input/input3 [ 105.949929] ACPI: Lid Switch [LID0] [ 105.949969] input: Power Button (CM) as /devices/virtual/input/input4 [ 105.968128] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 105.968188] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 105.968198] iTCO_wdt: No card detected [ 105.979053] ACPI: Power Button (CM) [PWRB] [ 106.302478] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 106.302484] sony-laptop: detected Type3 model [ 106.302836] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/SNY6001:00/input/input5 [ 106.343715] input: Sony Vaio Jogdial as /devices/virtual/input/input6 [ 106.375640] sony-laptop: device allocated minor is 63 [ 106.379912] sony-laptop: Sony Notebook Control Driver v0.5. [ 106.591368] ACPI: AC Adapter [ACAD] (on-line) [ 106.597910] ACPI: Battery Slot [BAT1] (battery present) [ 106.857774] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 106.857787] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 106.857815] sky2 0000:07:00.0: v1.20 addr 0xf8000000 irq 18 Yukon-FE (0xb7) rev 1 [ 106.858239] sky2 eth0: addr 00:13:a9:fc:d2:ef [ 106.954099] intel_rng: FWH not detected [ 106.968402] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 107.009838] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 107.066747] Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] [ 107.066769] Yenta: Enabling burst memory read transactions [ 107.066775] Yenta: Using CSCINT to route CSC interrupts to PCI [ 107.066776] Yenta: Routing CardBus interrupts to PCI [ 107.066782] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 107.176365] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 107.176422] tpm_inf_pnp 00:09: TPM found: config base 0x2e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 107.299105] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 [ 107.299109] Socket status: 30000006 [ 107.299111] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 107.299116] pcmcia: parent PCI bridge Memory window: 0xf8200000 - 0xf82fffff [ 107.326047] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 23 [ 107.498860] input: PS/2 Mouse as /devices/virtual/input/input8 [ 107.567100] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 107.993415] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds [ 107.993419] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 107.993565] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 107.993580] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 107.993608] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 108.467828] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 108.470950] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 108.520844] Linux video capture interface: v2.00 [ 108.602986] Bluetooth: Core ver 2.11 [ 108.603037] NET: Registered protocol family 31 [ 108.603039] Bluetooth: HCI device and connection manager initialized [ 108.603042] Bluetooth: HCI socket layer initialized [ 108.816361] Bluetooth: HCI USB driver ver 2.9 [ 108.819078] usbcore: registered new interface driver hci_usb [ 109.003951] cs: IO port probe 0x100-0x3af: clean. [ 109.006172] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 109.028382] cs: IO port probe 0x820-0x8ff: clean. [ 109.029127] cs: IO port probe 0xc00-0xcf7: clean. [ 109.030036] cs: IO port probe 0xa00-0xaff: clean. [ 109.186825] uvcvideo: Found UVC 1.00 device (05ca:1835) [ 109.187452] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 109.187775] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). [ 109.187777] uvcvideo: Failed to initialize the device (-5). [ 109.187796] usbcore: registered new interface driver uvcvideo [ 109.187799] USB Video Class driver (v0.1.0) [ 109.323267] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 109.323285] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 112.100571] ACPI: ACPI Dock Station Driver [ 112.289904] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 116.050618] NET: Registered protocol family 10 [ 116.050842] lo: Disabled Privacy Extensions [ 116.347850] lp: driver loaded but no devices found [ 116.370161] ppdev: user-space parallel port driver [ 119.652527] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 119.652579] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 119.652617] sysfs: duplicate filename 'sonypi' can not be created [ 119.652619] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one() [ 119.652622] Pid: 7978, comm: modprobe Not tainted 2.6.24-5-generic #1 [ 119.652627] [] sysfs_add_one+0x9f/0xe0 [ 119.652638] [] create_dir+0x48/0x90 [ 119.652644] [] sysfs_create_dir+0x29/0x50 [ 119.652650] [] kobject_get+0xf/0x20 [ 119.652655] [] kobject_add+0x93/0x1b0 [ 119.652660] [] kobject_set_name+0x81/0xb0 [ 119.652667] [] device_add+0xa7/0x510 [ 119.652674] [] kobject_init+0x29/0x40 [ 119.652679] [] device_create+0x88/0xc0 [ 119.652686] [] misc_register+0xb4/0x150 [ 119.652694] [] sonypi_probe+0x254/0x610 [sonypi] [ 119.652702] [] sonypi_irq+0x0/0x2d0 [sonypi] [ 119.652714] [] platform_drv_probe+0xc/0x10 [ 119.652718] [] driver_probe_device+0x88/0x190 [ 119.652723] [] klist_next+0x55/0xb0 [ 119.652731] [] bus_for_each_drv+0x44/0x70 [ 119.652737] [] device_attach+0x86/0x90 [ 119.652742] [] __device_attach+0x0/0x10 [ 119.652748] [] bus_attach_device+0x45/0x90 [ 119.652755] [] device_add+0x418/0x510 [ 119.652764] [] platform_device_add+0xf7/0x150 [ 119.652769] [] kobject_init+0x29/0x40 [ 119.652774] [] device_initialize+0x69/0x90 [ 119.652777] [] platform_device_alloc+0x4e/0x70 [ 119.652784] [] sonypi_init+0x64/0x9f [sonypi] [ 119.652790] [] sys_init_module+0x126/0x19c0 [ 119.652813] [] acpi_bus_register_driver+0x0/0x38 [ 119.652824] [] sysenter_past_esp+0x6b/0xa9 [ 119.652834] ======================= [ 119.652839] kobject_add failed for sonypi with -EEXIST, don't try to register things with the same name in the same directory. [ 119.652844] Pid: 7978, comm: modprobe Not tainted 2.6.24-5-generic #1 [ 119.652847] [] kobject_add+0x113/0x1b0 [ 119.652853] [] kobject_set_name+0x81/0xb0 [ 119.652858] [] device_add+0xa7/0x510 [ 119.652865] [] kobject_init+0x29/0x40 [ 119.652870] [] device_create+0x88/0xc0 [ 119.652877] [] misc_register+0xb4/0x150 [ 119.652886] [] sonypi_probe+0x254/0x610 [sonypi] [ 119.652892] [] sonypi_irq+0x0/0x2d0 [sonypi] [ 119.652903] [] platform_drv_probe+0xc/0x10 [ 119.652907] [] driver_probe_device+0x88/0x190 [ 119.652913] [] klist_next+0x55/0xb0 [ 119.652918] [] bus_for_each_drv+0x44/0x70 [ 119.652925] [] device_attach+0x86/0x90 [ 119.652929] [] __device_attach+0x0/0x10 [ 119.652933] [] bus_attach_device+0x45/0x90 [ 119.652941] [] device_add+0x418/0x510 [ 119.652950] [] platform_device_add+0xf7/0x150 [ 119.652955] [] kobject_init+0x29/0x40 [ 119.652960] [] device_initialize+0x69/0x90 [ 119.652965] [] platform_device_alloc+0x4e/0x70 [ 119.652972] [] sonypi_init+0x64/0x9f [sonypi] [ 119.652977] [] sys_init_module+0x126/0x19c0 [ 119.652998] [] acpi_bus_register_driver+0x0/0x38 [ 119.653008] [] sysenter_past_esp+0x6b/0xa9 [ 119.653019] ======================= [ 119.653022] sonypi: misc_register failed [ 119.653034] sonypi: probe of sonypi failed with error -17 [ 123.171879] sky2 eth0: enabling interface [ 123.177760] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 123.343358] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 123.446215] Bluetooth: L2CAP ver 2.9 [ 123.446222] Bluetooth: L2CAP socket layer initialized [ 123.806197] Bluetooth: RFCOMM socket layer initialized [ 123.806215] Bluetooth: RFCOMM TTY layer initialized [ 123.806218] Bluetooth: RFCOMM ver 1.8 [ 189.046325] CPU0 attaching NULL sched-domain. [ 189.046331] CPU1 attaching NULL sched-domain. [ 189.070734] CPU0 attaching sched-domain: [ 189.070741] domain 0: span 03 [ 189.070744] groups: 01 02 [ 189.070751] CPU1 attaching sched-domain: [ 189.070754] domain 0: span 03 [ 189.070759] groups: 02 01 [ 414.082936] NET: Registered protocol family 17 [ 415.769466] wlan0: Initial auth_alg=0 [ 415.769476] wlan0: authenticate with AP 00:12:17:37:7f:58 [ 415.771255] wlan0: RX authentication from 00:12:17:37:7f:58 (alg=0 transaction=2 status=0) [ 415.771261] wlan0: authenticated [ 415.771266] wlan0: associate with AP 00:12:17:37:7f:58 [ 415.773418] wlan0: RX AssocResp from 00:12:17:37:7f:58 (capab=0x401 status=0 aid=4) [ 415.773425] wlan0: associated [ 415.773430] wlan0: switched to short barker preamble (BSSID=00:12:17:37:7f:58) [ 415.777075] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 430.579529] wlan0: no IPv6 routers present