[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2019-06-13 [ 0.000000] Linux version 5.3.0-53-generic (buildd@lgw01-amd64-016) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #47~18.04.1-Ubuntu SMP Thu May 7 13:10:50 UTC 2020 (Ubuntu 5.3.0-53.47~18.04.1-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-53-generic root=UUID=68cdded4-86f5-4f37-b6be-86a1a345547a ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7592fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7593000-0x00000000c78f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c78f3000-0x00000000cae48fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cae49000-0x00000000caea7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000caea8000-0x00000000cb2e9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb2ea000-0x00000000cc46dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cc46e000-0x00000000ccffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd800000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc63de018-0xc63ee057] usable ==> usable [ 0.000000] e820: update [mem 0xc63de018-0xc63ee057] usable ==> usable [ 0.000000] e820: update [mem 0xc63d0018-0xc63dd057] usable ==> usable [ 0.000000] e820: update [mem 0xc63d0018-0xc63dd057] usable ==> usable [ 0.000000] e820: update [mem 0xc63c2018-0xc63cfe57] usable ==> usable [ 0.000000] e820: update [mem 0xc63c2018-0xc63cfe57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c63c2017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c63c2018-0x00000000c63cfe57] usable [ 0.000000] reserve setup_data: [mem 0x00000000c63cfe58-0x00000000c63d0017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c63d0018-0x00000000c63dd057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c63dd058-0x00000000c63de017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c63de018-0x00000000c63ee057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c63ee058-0x00000000c7592fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c7593000-0x00000000c78f2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c78f3000-0x00000000cae48fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cae49000-0x00000000caea7fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000caea8000-0x00000000cb2e9fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cb2ea000-0x00000000cc46dfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cc46e000-0x00000000ccffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ccfff000-0x00000000ccffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cd800000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022effffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xcb6ee000 ACPI 2.0=0xcb6ee000 SMBIOS=0xcce33a18 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. X555LDB/X555LDB, BIOS X555LDB.303 12/19/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2396.645 MHz processor [ 0.000059] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000060] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000066] last_pfn = 0x22f000 max_arch_pfn = 0x400000000 [ 0.000069] MTRR default type: uncachable [ 0.000070] MTRR fixed ranges enabled: [ 0.000071] 00000-9FFFF write-back [ 0.000071] A0000-DFFFF uncachable [ 0.000072] E0000-FFFFF write-protect [ 0.000072] MTRR variable ranges enabled: [ 0.000074] 0 base 0000000000 mask 7F80000000 write-back [ 0.000074] 1 base 0080000000 mask 7FC0000000 write-back [ 0.000075] 2 base 00C0000000 mask 7FF8000000 write-back [ 0.000076] 3 base 00C8000000 mask 7FFC000000 write-back [ 0.000076] 4 base 00CC000000 mask 7FFF000000 write-back [ 0.000077] 5 base 0100000000 mask 7F00000000 write-back [ 0.000078] 6 base 0200000000 mask 7FC0000000 write-back [ 0.000078] 7 base 0230000000 mask 7FF0000000 uncachable [ 0.000079] 8 base 022F000000 mask 7FFF000000 uncachable [ 0.000079] 9 disabled [ 0.000366] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000497] total RAM covered: 8128M [ 0.000771] Found optimal setting for mtrr clean up [ 0.000772] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G [ 0.001004] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved [ 0.001007] last_pfn = 0xcd000 max_arch_pfn = 0x400000000 [ 0.008253] check: Scanning 1 areas for low memory corruption [ 0.008256] Using GB pages for direct mapping [ 0.008258] BRK [0x165201000, 0x165201fff] PGTABLE [ 0.008259] BRK [0x165202000, 0x165202fff] PGTABLE [ 0.008260] BRK [0x165203000, 0x165203fff] PGTABLE [ 0.008282] BRK [0x165204000, 0x165204fff] PGTABLE [ 0.008283] BRK [0x165205000, 0x165205fff] PGTABLE [ 0.008375] BRK [0x165206000, 0x165206fff] PGTABLE [ 0.008412] BRK [0x165207000, 0x165207fff] PGTABLE [ 0.008462] BRK [0x165208000, 0x165208fff] PGTABLE [ 0.008535] BRK [0x165209000, 0x165209fff] PGTABLE [ 0.008661] BRK [0x16520a000, 0x16520afff] PGTABLE [ 0.008721] BRK [0x16520b000, 0x16520bfff] PGTABLE [ 0.008765] RAMDISK: [mem 0x3d872000-0x3fffdfff] [ 0.008772] ACPI: Early table checksum verification disabled [ 0.008774] ACPI: RSDP 0x00000000CB6EE000 000024 (v02 _ASUS_) [ 0.008777] ACPI: XSDT 0x00000000CB6EE0B0 0000E4 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.008782] ACPI: FACP 0x00000000CB7063F8 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.008786] ACPI: DSDT 0x00000000CB6EE228 0181CB (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.008788] ACPI: FACS 0x00000000CC46BF80 000040 [ 0.008790] ACPI: APIC 0x00000000CB706508 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.008792] ACPI: FPDT 0x00000000CB706590 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.008794] ACPI: FIDT 0x00000000CB7065D8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.008796] ACPI: ECDT 0x00000000CB706678 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.008798] ACPI: MCFG 0x00000000CB706740 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.008801] ACPI: HPET 0x00000000CB706780 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.008803] ACPI: SSDT 0x00000000CB7067B8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.008805] ACPI: UEFI 0x00000000CB706AD0 000042 (v01 00000000 00000000) [ 0.008807] ACPI: SSDT 0x00000000CB706B18 000194 (v01 Intel zpodd 00001000 INTL 20120913) [ 0.008809] ACPI: SSDT 0x00000000CB706CB0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.008812] ACPI: ASF! 0x00000000CB707930 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.008814] ACPI: SSDT 0x00000000CB7079D0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.008816] ACPI: SSDT 0x00000000CB707F10 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.008818] ACPI: SSDT 0x00000000CB708A88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.008820] ACPI: SSDT 0x00000000CB70BCD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.008822] ACPI: PCCT 0x00000000CB70C068 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.008824] ACPI: SSDT 0x00000000CB70C0D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.008827] ACPI: SSDT 0x00000000CB70CBA0 006622 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.008829] ACPI: SSDT 0x00000000CB7131C8 000629 (v02 SgRef SgPch 00001000 INTL 20120913) [ 0.008831] ACPI: DMAR 0x00000000CB7137F8 0000A8 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.008833] ACPI: BGRT 0x00000000CB7138A0 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.008835] ACPI: SSDT 0x00000000CB7138D8 000E83 (v01 OptRef OptTabl 00001000 INTL 20120913) [ 0.008837] ACPI: MSDM 0x00000000CAEA6E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001) [ 0.008844] ACPI: Local APIC address 0xfee00000 [ 0.008914] No NUMA configuration found [ 0.008915] Faking a node at [mem 0x0000000000000000-0x000000022effffff] [ 0.008924] NODE_DATA(0) allocated [mem 0x22efd5000-0x22effffff] [ 0.009102] Zone ranges: [ 0.009103] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009104] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009104] Normal [mem 0x0000000100000000-0x000000022effffff] [ 0.009105] Device empty [ 0.009106] Movable zone start for each node [ 0.009109] Early memory node ranges [ 0.009109] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.009110] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.009111] node 0: [mem 0x0000000000100000-0x00000000c7592fff] [ 0.009111] node 0: [mem 0x00000000c78f3000-0x00000000cae48fff] [ 0.009112] node 0: [mem 0x00000000caea8000-0x00000000cb2e9fff] [ 0.009113] node 0: [mem 0x00000000ccfff000-0x00000000ccffffff] [ 0.009113] node 0: [mem 0x0000000100000000-0x000000022effffff] [ 0.009361] Zeroed struct page in unavailable ranges: 24888 pages [ 0.009362] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff] [ 0.009363] On node 0 totalpages: 2072264 [ 0.009364] DMA zone: 64 pages used for memmap [ 0.009364] DMA zone: 21 pages reserved [ 0.009365] DMA zone: 3996 pages, LIFO batch:0 [ 0.009410] DMA32 zone: 12925 pages used for memmap [ 0.009410] DMA32 zone: 827180 pages, LIFO batch:63 [ 0.019720] Normal zone: 19392 pages used for memmap [ 0.019721] Normal zone: 1241088 pages, LIFO batch:63 [ 0.033480] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff] [ 0.033540] ACPI: PM-Timer IO Port: 0x1808 [ 0.033542] ACPI: Local APIC address 0xfee00000 [ 0.033548] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x31]) [ 0.033548] ACPI: NMI not connected to LINT 1! [ 0.033549] ACPI: LAPIC_NMI (acpi_id[0x02] high dfl lint[0x10]) [ 0.033549] ACPI: NMI not connected to LINT 1! [ 0.033550] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x14]) [ 0.033550] ACPI: NMI not connected to LINT 1! [ 0.033551] ACPI: LAPIC_NMI (acpi_id[0x04] res dfl lint[0x11]) [ 0.033551] ACPI: NMI not connected to LINT 1! [ 0.033561] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.033563] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.033565] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.033566] ACPI: IRQ0 used by override. [ 0.033567] ACPI: IRQ9 used by override. [ 0.033568] Using ACPI (MADT) for SMP configuration information [ 0.033569] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.033576] e820: update [mem 0xc90bf000-0xc90d7fff] usable ==> reserved [ 0.033584] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.033600] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.033601] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.033602] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.033603] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.033604] PM: Registered nosave memory: [mem 0xc63c2000-0xc63c2fff] [ 0.033605] PM: Registered nosave memory: [mem 0xc63cf000-0xc63cffff] [ 0.033605] PM: Registered nosave memory: [mem 0xc63d0000-0xc63d0fff] [ 0.033607] PM: Registered nosave memory: [mem 0xc63dd000-0xc63ddfff] [ 0.033607] PM: Registered nosave memory: [mem 0xc63de000-0xc63defff] [ 0.033608] PM: Registered nosave memory: [mem 0xc63ee000-0xc63eefff] [ 0.033610] PM: Registered nosave memory: [mem 0xc7593000-0xc78f2fff] [ 0.033611] PM: Registered nosave memory: [mem 0xc90bf000-0xc90d7fff] [ 0.033612] PM: Registered nosave memory: [mem 0xcae49000-0xcaea7fff] [ 0.033613] PM: Registered nosave memory: [mem 0xcb2ea000-0xcc46dfff] [ 0.033614] PM: Registered nosave memory: [mem 0xcc46e000-0xccffefff] [ 0.033615] PM: Registered nosave memory: [mem 0xcd000000-0xcd7fffff] [ 0.033616] PM: Registered nosave memory: [mem 0xcd800000-0xcfffffff] [ 0.033616] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff] [ 0.033617] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.033617] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.033618] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.033618] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.033618] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.033619] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.033619] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.033620] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.033620] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.033620] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.033621] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.033622] [mem 0xd0000000-0xf7ffffff] available for PCI devices [ 0.033623] Booting paravirtualized kernel on bare hardware [ 0.033626] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.033632] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.033855] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.033861] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.033862] pcpu-alloc: [0] 0 1 2 3 [ 0.033887] Built 1 zonelists, mobility grouping on. Total pages: 2039862 [ 0.033888] Policy zone: Normal [ 0.033889] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-53-generic root=UUID=68cdded4-86f5-4f37-b6be-86a1a345547a ro quiet splash vt.handoff=1 [ 0.034495] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.034766] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.034804] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.039308] Calgary: detecting Calgary via BIOS EBDA area [ 0.039310] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.058653] Memory: 7938808K/8289056K available (14339K kernel code, 2369K rwdata, 4668K rodata, 2664K init, 5072K bss, 350248K reserved, 0K cma-reserved) [ 0.058659] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0 [ 0.058769] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.058780] Kernel/User page tables isolation: enabled [ 0.058792] ftrace: allocating 43313 entries in 170 pages [ 0.073473] rcu: Hierarchical RCU implementation. [ 0.073474] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.073475] Tasks RCU enabled. [ 0.073476] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.073476] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.076294] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16 [ 0.076492] random: crng done (trusting CPU's manufacturer) [ 0.076512] vt handoff: transparent VT on vt#1 [ 0.076517] Console: colour dummy device 80x25 [ 0.076521] printk: console [tty0] enabled [ 0.076535] ACPI: Core revision 20190703 [ 0.076717] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.076727] APIC: Switch to symmetric I/O mode setup [ 0.076728] DMAR: Host address width 39 [ 0.076729] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.076734] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.076734] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.076737] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.076738] DMAR: RMRR base: 0x000000cce44000 end: 0x000000cce52fff [ 0.076738] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff [ 0.076740] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.076740] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.076741] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.076741] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.077222] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.077222] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.077806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096728] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228bd633701, max_idle_ns: 440795217423 ns [ 0.096731] Calibrating delay loop (skipped), value calculated using timer frequency.. 4793.29 BogoMIPS (lpj=9586580) [ 0.096733] pid_max: default: 32768 minimum: 301 [ 0.099324] LSM: Security Framework initializing [ 0.099332] Yama: becoming mindful. [ 0.099356] AppArmor: AppArmor initialized [ 0.099396] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.099411] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.099543] *** VALIDATE proc *** [ 0.099583] *** VALIDATE cgroup1 *** [ 0.099584] *** VALIDATE cgroup2 *** [ 0.099630] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.099639] process: using mwait in idle threads [ 0.099642] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.099642] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.099644] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.099645] Spectre V2 : Mitigation: Full generic retpoline [ 0.099646] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.099646] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.099647] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.099648] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.099649] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.099651] MDS: Mitigation: Clear CPU buffers [ 0.099856] Freeing SMP alternatives memory: 40K [ 0.102168] TSC deadline timer enabled [ 0.102170] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.102266] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.102280] ... version: 3 [ 0.102281] ... bit width: 48 [ 0.102281] ... generic registers: 4 [ 0.102282] ... value mask: 0000ffffffffffff [ 0.102282] ... max period: 00007fffffffffff [ 0.102283] ... fixed-purpose events: 3 [ 0.102283] ... event mask: 000000070000000f [ 0.102314] rcu: Hierarchical SRCU implementation. [ 0.103150] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.103203] smp: Bringing up secondary CPUs ... [ 0.103283] x86: Booting SMP configuration: [ 0.103284] .... node #0, CPUs: #1 #2 [ 0.104729] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.104729] #3 [ 0.104769] smp: Brought up 1 node, 4 CPUs [ 0.104769] smpboot: Max logical packages: 1 [ 0.104769] smpboot: Total of 4 processors activated (19173.16 BogoMIPS) [ 0.106124] devtmpfs: initialized [ 0.106124] x86/mm: Memory block size: 128MB [ 0.106124] PM: Registering ACPI NVS region [mem 0xcb2ea000-0xcc46dfff] (18366464 bytes) [ 0.106124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.106124] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.106124] pinctrl core: initialized pinctrl subsystem [ 0.106124] PM: RTC time: 17:49:40, date: 2020-06-03 [ 0.106124] NET: Registered protocol family 16 [ 0.106124] audit: initializing netlink subsys (disabled) [ 0.106124] audit: type=2000 audit(1591206580.028:1): state=initialized audit_enabled=0 res=1 [ 0.106124] EISA bus registered [ 0.106124] cpuidle: using governor ladder [ 0.106124] cpuidle: using governor menu [ 0.106124] Detected 1 PCC Subspaces [ 0.106124] Registering PCC driver as Mailbox controller [ 0.106124] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.106124] ACPI: bus type PCI registered [ 0.106124] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.106124] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.106124] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.106124] PCI: Using configuration type 1 for base access [ 0.106124] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.109123] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.109123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.109123] ACPI: Added _OSI(Module Device) [ 0.109123] ACPI: Added _OSI(Processor Device) [ 0.109123] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.109123] ACPI: Added _OSI(Processor Aggregator Device) [ 0.109123] ACPI: Added _OSI(Linux-Dell-Video) [ 0.109123] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.109123] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.136132] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.137369] ACPI: EC: EC started [ 0.137370] ACPI: EC: interrupt blocked [ 0.138944] ACPI: \: Used as first EC [ 0.138945] ACPI: \: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.138945] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.143522] ACPI: Dynamic OEM Table Load: [ 0.143528] ACPI: SSDT 0xFFFF9A7424F47800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.144998] ACPI: Dynamic OEM Table Load: [ 0.145003] ACPI: SSDT 0xFFFF9A74252EF800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.146522] ACPI: Dynamic OEM Table Load: [ 0.146526] ACPI: SSDT 0xFFFF9A7424CD6800 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.148909] ACPI: Interpreter enabled [ 0.148936] ACPI: (supports S0 S3 S4 S5) [ 0.148937] ACPI: Using IOAPIC for interrupt routing [ 0.148966] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.149729] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.152653] ACPI: Power Resource [PG00] (on) [ 0.153125] ACPI: Power Resource [PG01] (on) [ 0.153588] ACPI: Power Resource [PG02] (on) [ 0.156442] ACPI: Power Resource [PC05] (on) [ 0.165986] ACPI: Power Resource [FN00] (off) [ 0.166058] ACPI: Power Resource [FN01] (off) [ 0.166128] ACPI: Power Resource [FN02] (off) [ 0.166199] ACPI: Power Resource [FN03] (off) [ 0.166271] ACPI: Power Resource [FN04] (off) [ 0.167234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.167239] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.167944] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.167945] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.168479] PCI host bridge to bus 0000:00 [ 0.168481] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.168482] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.168483] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.168484] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.168485] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.168485] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.168486] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.168487] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.168488] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.168488] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.168489] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.168490] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window] [ 0.168491] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.168499] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.168604] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.168613] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf5ffffff 64bit] [ 0.168618] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.168621] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.168632] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.168721] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.168729] pci 0000:00:03.0: reg 0x10: [mem 0xf731c000-0xf731ffff 64bit] [ 0.168834] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.168844] pci 0000:00:04.0: reg 0x10: [mem 0xf7310000-0xf7317fff 64bit] [ 0.168965] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.168981] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit] [ 0.169030] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.169117] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.169136] pci 0000:00:16.0: reg 0x10: [mem 0xf7324000-0xf732401f 64bit] [ 0.169196] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.169312] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.169328] pci 0000:00:1b.0: reg 0x10: [mem 0xf7318000-0xf731bfff 64bit] [ 0.169378] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.169483] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.169548] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.169688] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.169757] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.169895] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.169964] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.170099] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400 [ 0.170168] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.170307] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.170498] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.170510] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.170516] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.170521] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.170527] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.170532] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.170537] pci 0000:00:1f.2: reg 0x24: [mem 0xf7322000-0xf73227ff] [ 0.170566] pci 0000:00:1f.2: PME# supported from D3hot [ 0.170648] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.170662] pci 0000:00:1f.3: reg 0x10: [mem 0xf7321000-0xf73210ff 64bit] [ 0.170678] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.170780] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.170812] pci 0000:00:1f.6: reg 0x10: [mem 0xf7320000-0xf7320fff 64bit] [ 0.171046] acpiphp: Slot [1] registered [ 0.171050] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.171117] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.171145] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.171170] pci 0000:02:00.0: reg 0x18: [mem 0xf7204000-0xf7204fff 64bit] [ 0.171185] pci 0000:02:00.0: reg 0x20: [mem 0xf7200000-0xf7203fff 64bit] [ 0.171283] pci 0000:02:00.0: supports D1 D2 [ 0.171284] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.171405] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.171408] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.171410] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff] [ 0.171487] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000 [ 0.171537] pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff 64bit] [ 0.171615] pci 0000:03:00.0: reg 0x30: [mem 0xf7180000-0xf718ffff pref] [ 0.171737] pci 0000:03:00.0: supports D1 D2 [ 0.171738] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.171879] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.171882] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff] [ 0.171940] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200 [ 0.171969] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.171986] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.172002] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.172014] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f] [ 0.172025] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.172045] pci 0000:04:00.0: Enabling HDA controller [ 0.172129] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 2.5 GT/s x16 link) [ 0.172260] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.172262] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.172264] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff] [ 0.172268] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.173485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.173543] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.173598] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.173653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.173707] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.173762] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.173816] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.173870] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.176841] ACPI: EC: interrupt unblocked [ 0.176852] ACPI: EC: event unblocked [ 0.176858] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.176859] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.176938] SCSI subsystem initialized [ 0.176938] libata version 3.00 loaded. [ 0.176938] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.176938] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.176938] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.176938] vgaarb: loaded [ 0.176938] ACPI: bus type USB registered [ 0.176938] usbcore: registered new interface driver usbfs [ 0.176938] usbcore: registered new interface driver hub [ 0.176938] usbcore: registered new device driver usb [ 0.176938] pps_core: LinuxPPS API ver. 1 registered [ 0.176938] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.176938] PTP clock support registered [ 0.176938] EDAC MC: Ver: 3.0.0 [ 0.176938] Registered efivars operations [ 0.176938] PCI: Using ACPI for IRQ routing [ 0.177876] PCI: pci_cache_line_size set to 64 bytes [ 0.177920] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.177921] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.177921] e820: reserve RAM buffer [mem 0xc63c2018-0xc7ffffff] [ 0.177922] e820: reserve RAM buffer [mem 0xc63d0018-0xc7ffffff] [ 0.177923] e820: reserve RAM buffer [mem 0xc63de018-0xc7ffffff] [ 0.177924] e820: reserve RAM buffer [mem 0xc7593000-0xc7ffffff] [ 0.177925] e820: reserve RAM buffer [mem 0xc90bf000-0xcbffffff] [ 0.177926] e820: reserve RAM buffer [mem 0xcae49000-0xcbffffff] [ 0.177926] e820: reserve RAM buffer [mem 0xcb2ea000-0xcbffffff] [ 0.177927] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff] [ 0.177928] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff] [ 0.178013] NetLabel: Initializing [ 0.178013] NetLabel: domain hash size = 128 [ 0.178014] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.178026] NetLabel: unlabeled traffic allowed by default [ 0.178039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.178039] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.180748] clocksource: Switched to clocksource tsc-early [ 0.190857] VFS: Disk quotas dquot_6.6.0 [ 0.190873] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.190898] *** VALIDATE hugetlbfs *** [ 0.190972] AppArmor: AppArmor Filesystem Enabled [ 0.190997] pnp: PnP ACPI init [ 0.191221] system 00:00: [io 0x0240-0x0259] has been reserved [ 0.191226] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.191315] pnp 00:01: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.191352] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) [ 0.191446] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.191448] system 00:03: [io 0xffff] has been reserved [ 0.191449] system 00:03: [io 0xffff] has been reserved [ 0.191450] system 00:03: [io 0xffff] has been reserved [ 0.191450] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.191451] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.191454] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.191497] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.191532] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.191535] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.191718] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.191719] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.191720] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.191721] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.191722] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.191724] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.191725] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.191726] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.191728] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.191729] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.191730] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.191731] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.191733] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192192] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192901] pnp: PnP ACPI: found 8 devices [ 0.193921] thermal_sys: Registered thermal governor 'fair_share' [ 0.193921] thermal_sys: Registered thermal governor 'bang_bang' [ 0.193922] thermal_sys: Registered thermal governor 'step_wise' [ 0.193922] thermal_sys: Registered thermal governor 'user_space' [ 0.193923] thermal_sys: Registered thermal governor 'power_allocator' [ 0.198406] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.198439] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.198448] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.198449] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.198452] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff] [ 0.198458] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.198461] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff] [ 0.198466] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.198467] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.198470] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff] [ 0.198473] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.198477] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.198478] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.198479] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.198480] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.198480] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.198481] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.198482] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.198483] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.198483] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.198484] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.198485] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.198486] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfeafffff window] [ 0.198487] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.198488] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.198488] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.198489] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.198490] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.198491] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.198640] NET: Registered protocol family 2 [ 0.198758] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.198808] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.198952] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.199058] TCP: Hash tables configured (established 65536 bind 65536) [ 0.199096] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.199118] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.199187] NET: Registered protocol family 1 [ 0.199191] NET: Registered protocol family 44 [ 0.199199] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.199423] PCI: CLS 64 bytes, default 64 [ 0.199453] Trying to unpack rootfs image as initramfs... [ 0.656010] Freeing initrd memory: 40496K [ 0.672746] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.672748] software IO TLB: mapped [mem 0xc23c2000-0xc63c2000] (64MB) [ 0.672953] check: Scanning for low memory corruption every 60 seconds [ 0.674255] Initialise system trusted keyrings [ 0.674263] Key type blacklist registered [ 0.674289] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.675386] zbud: loaded [ 0.675696] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.675818] fuse: init (API version 7.31) [ 0.675903] Platform Keyring initialized [ 0.679854] Key type asymmetric registered [ 0.679855] Asymmetric key parser 'x509' registered [ 0.679869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.679900] io scheduler mq-deadline registered [ 0.680203] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42 [ 0.680385] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43 [ 0.680547] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44 [ 0.680702] pcieport 0000:00:1c.4: PME: Signaling with IRQ 45 [ 0.680764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.680823] efifb: probing for efifb [ 0.680836] efifb: showing boot graphics [ 0.681253] efifb: framebuffer at 0xd0000000, using 4128k, total 4128k [ 0.681253] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.681254] efifb: scrolling: redraw [ 0.681255] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.681287] fbcon: Deferring console take-over [ 0.681288] fb0: EFI VGA frame buffer device [ 0.681293] intel_idle: MWAIT substates: 0x11142120 [ 0.681294] intel_idle: v0.4.1 model 0x3D [ 0.681509] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.681709] ACPI: AC Adapter [AC0] (off-line) [ 0.681780] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.681785] ACPI: Lid Switch [LID] [ 0.681806] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.681815] ACPI: Sleep Button [SLPB] [ 0.681839] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.681843] ACPI: Power Button [PWRF] [ 0.683018] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.683019] ACPI: Thermal Zone [THRM] (43 C) [ 0.683469] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.683470] ACPI: Thermal Zone [TZ00] (28 C) [ 0.683730] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.683731] ACPI: Thermal Zone [TZ01] (30 C) [ 0.683921] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.685405] Linux agpgart interface v0.103 [ 0.687322] loop: module loaded [ 0.687527] libphy: Fixed MDIO Bus: probed [ 0.687528] tun: Universal TUN/TAP device driver, 1.6 [ 0.687566] PPP generic driver version 2.4.2 [ 0.687599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.687601] ehci-pci: EHCI PCI platform driver [ 0.687611] ehci-platform: EHCI generic platform driver [ 0.687621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.687622] ohci-pci: OHCI PCI platform driver [ 0.687630] ohci-platform: OHCI generic platform driver [ 0.687637] uhci_hcd: USB Universal Host Controller Interface driver [ 0.687770] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.687775] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.688860] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 0.688865] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.689030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.689031] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.689032] usb usb1: Product: xHCI Host Controller [ 0.689033] usb usb1: Manufacturer: Linux 5.3.0-53-generic xhci-hcd [ 0.689034] usb usb1: SerialNumber: 0000:00:14.0 [ 0.689156] hub 1-0:1.0: USB hub found [ 0.689173] hub 1-0:1.0: 11 ports detected [ 0.692952] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.692955] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.692958] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.692993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.692994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.692995] usb usb2: Product: xHCI Host Controller [ 0.692996] usb usb2: Manufacturer: Linux 5.3.0-53-generic xhci-hcd [ 0.692997] usb usb2: SerialNumber: 0000:00:14.0 [ 0.693108] hub 2-0:1.0: USB hub found [ 0.693117] hub 2-0:1.0: 4 ports detected [ 0.694651] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.700328] i8042: Detected active multiplexing controller, rev 1.1 [ 0.702443] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.702447] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.702466] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.702479] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.702492] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.702585] mousedev: PS/2 mouse device common for all mice [ 0.702802] rtc_cmos 00:04: RTC can wake from S4 [ 0.702953] rtc_cmos 00:04: registered as rtc0 [ 0.702963] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.702968] i2c /dev entries driver [ 0.703004] device-mapper: uevent: version 1.0.3 [ 0.703057] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.703073] platform eisa.0: Probing EISA bus 0 [ 0.703074] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.703075] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.703076] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.703077] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.703077] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.703078] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.703079] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.703079] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.703080] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.703081] platform eisa.0: EISA: Detected 0 cards [ 0.703087] intel_pstate: Intel P-state driver initializing [ 0.703211] ledtrig-cpu: registered to indicate activity on CPUs [ 0.703214] EFI Variables Facility v0.08 2004-May-17 [ 0.705969] NET: Registered protocol family 10 [ 0.710909] Segment Routing with IPv6 [ 0.710938] NET: Registered protocol family 17 [ 0.710987] Key type dns_resolver registered [ 0.711210] RAS: Correctable Errors collector initialized. [ 0.711239] microcode: sig=0x306d4, pf=0x40, revision=0x2e [ 0.711304] microcode: Microcode Update Driver: v2.2. [ 0.711313] sched_clock: Marking stable (711024964, 276087)->(714571732, -3270681) [ 0.711428] registered taskstats version 1 [ 0.711435] Loading compiled-in X.509 certificates [ 0.712833] Loaded X.509 cert 'Build time autogenerated kernel key: 08838d266c8704d3d582ec0b8cbad5486d1a5fab' [ 0.712862] zswap: loaded using pool lzo/zbud [ 0.717403] Key type big_key registered [ 0.719564] Key type encrypted registered [ 0.719566] AppArmor: AppArmor sha1 policy hashing enabled [ 0.720347] ima: No TPM chip found, activating TPM-bypass! [ 0.720351] ima: Allocated hash algorithm: sha1 [ 0.720355] No architecture policies found [ 0.720368] evm: Initialising EVM extended attributes: [ 0.720368] evm: security.selinux [ 0.720369] evm: security.SMACK64 [ 0.720369] evm: security.SMACK64EXEC [ 0.720369] evm: security.SMACK64TRANSMUTE [ 0.720369] evm: security.SMACK64MMAP [ 0.720370] evm: security.apparmor [ 0.720370] evm: security.ima [ 0.720371] evm: security.capability [ 0.720371] evm: HMAC attrs: 0x1 [ 0.720995] PM: Magic number: 8:814:844 [ 0.721099] rtc_cmos 00:04: setting system clock to 2020-06-03T17:49:41 UTC (1591206581) [ 0.742393] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.917495] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.918552] Freeing unused decrypted memory: 2040K [ 0.918994] Freeing unused kernel image memory: 2664K [ 0.919022] Write protecting the kernel read-only data: 22528k [ 0.919478] Freeing unused kernel image memory: 2008K [ 0.919700] Freeing unused kernel image memory: 1476K [ 0.927936] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.927937] x86/mm: Checking user space page tables [ 0.935912] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.935913] Run /init as init process [ 1.051424] ahci 0000:00:1f.2: version 3.0 [ 1.051677] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.062354] libphy: r8169: probed [ 1.062562] r8169 0000:02:00.0 eth0: RTL8168gu/8111gu, 1c:b7:2c:16:ad:69, XID 509, IRQ 48 [ 1.062564] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.064754] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 1.064758] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.065339] scsi host0: ahci [ 1.065551] scsi host1: ahci [ 1.067862] scsi host2: ahci [ 1.067968] scsi host3: ahci [ 1.068036] ata1: SATA max UDMA/133 abar m2048@0xf7322000 port 0xf7322100 irq 47 [ 1.068038] ata2: SATA max UDMA/133 abar m2048@0xf7322000 port 0xf7322180 irq 47 [ 1.068038] ata3: DUMMY [ 1.068040] ata4: DUMMY [ 1.068117] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.124777] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.174261] input: FocalTechPS/2 FocalTech Touchpad as /devices/platform/i8042/serio4/input/input11 [ 1.223908] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 1.223910] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.223911] usb 1-3: Product: USB Receiver [ 1.223912] usb 1-3: Manufacturer: Logitech [ 1.307695] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.307710] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.309354] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133 [ 1.309356] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.311326] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100 [ 1.311336] ata1.00: configured for UDMA/133 [ 1.311718] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5 [ 1.311891] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.311976] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.311978] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.311984] sd 0:0:0:0: [sda] Write Protect is off [ 1.311985] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.311994] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.313932] ata2.00: configured for UDMA/100 [ 1.320262] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5 [ 1.352788] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 1.370679] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 1.371488] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.388983] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.388984] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.389247] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.389330] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.415280] usb 1-5: config 1 interface 1 altsetting 4 endpoint 0x81 has invalid wMaxPacketSize 0 [ 1.421679] usb 1-5: New USB device found, idVendor=04f2, idProduct=b483, bcdDevice=99.14 [ 1.421681] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.421682] usb 1-5: Product: USB2.0 VGA UVC WebCam [ 1.676790] tsc: Refined TSC clocksource calibration: 2396.531 MHz [ 1.676797] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x228b6ab0fa2, max_idle_ns: 440795297730 ns [ 1.676810] clocksource: Switched to clocksource tsc [ 2.060788] usb 1-6: new full-speed USB device number 4 using xhci_hcd [ 2.209881] usb 1-6: New USB device found, idVendor=13d3, idProduct=3423, bcdDevice= 0.01 [ 2.209883] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.336785] usb 1-8: new high-speed USB device number 5 using xhci_hcd [ 2.357120] usb 1-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.357122] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.357123] usb 1-8: Product: USB2.0-CRW [ 2.357124] usb 1-8: Manufacturer: Generic [ 2.357125] usb 1-8: SerialNumber: 20100201396000000 [ 2.363611] hidraw: raw HID events driver (C) Jiri Kosina [ 2.364829] usbcore: registered new interface driver rtsx_usb [ 2.372096] usbcore: registered new interface driver usbhid [ 2.372097] usbhid: USB HID core driver [ 2.374466] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0001/input/input12 [ 2.432983] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 [ 2.433250] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input13 [ 2.433426] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input14 [ 2.492990] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input15 [ 2.493189] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 [ 2.493537] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 [ 2.641295] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 [ 2.762648] input: Logitech Unifying Device. Wireless PID:4009 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4009.0004/input/input17 [ 2.762786] hid-generic 0003:046D:4009.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4009] on usb-0000:00:14.0-3/input2:1 [ 2.822457] input: Logitech M315/235/317 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4009.0004/input/input21 [ 2.822561] logitech-hidpp-device 0003:046D:4009.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/235/317] on usb-0000:00:14.0-3/input2:1 [ 2.989014] fbcon: Taking over console [ 2.989108] Console: switching to colour frame buffer device 170x48 [ 3.029588] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 4.514504] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.532956] systemd[1]: Detected architecture x86-64. [ 4.546390] systemd[1]: Set hostname to . [ 6.723003] systemd[1]: Created slice User and Session Slice. [ 6.723060] systemd[1]: Reached target User and Group Name Lookups. [ 6.723282] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.723295] systemd[1]: Reached target Remote File Systems. [ 6.723409] systemd[1]: Created slice System Slice. [ 6.723458] systemd[1]: Listening on udev Kernel Socket. [ 6.723506] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.893277] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 7.137079] lp: driver loaded but no devices found [ 7.146008] ppdev: user-space parallel port driver [ 7.154743] systemd-journald[327]: Received request to flush runtime journal from PID 1 [ 10.431077] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input22 [ 10.513532] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 11.167329] checking generic (d0000000 408000) vs hw (d0000000 10000000) [ 11.167331] fb0: switching to inteldrmfb from EFI VGA [ 11.167436] Console: switching to colour dummy device 80x25 [ 11.167486] i915 0000:00:02.0: vgaarb: deactivate vga console [ 11.168325] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.168326] [drm] Driver supports precise vblank timestamp query. [ 11.168708] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 11.203493] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 11.207130] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.212537] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input23 [ 11.212644] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 11.212681] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:01/input/input24 [ 11.216527] fbcon: i915drmfb (fb0) is primary device [ 11.216609] Console: switching to colour frame buffer device 170x48 [ 11.216633] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 11.243059] asus_wmi: ASUS WMI generic driver loaded [ 11.248392] asus_wmi: Initialization: 0x1 [ 11.248469] asus_wmi: BIOS WMI version: 7.9 [ 11.248551] asus_wmi: SFUN value: 0xa0077 [ 11.248554] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 11.248556] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue [ 11.251397] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input25 [ 11.253492] asus_wmi: Number of fans: 1 [ 11.274330] Bluetooth: Core ver 2.22 [ 11.274344] NET: Registered protocol family 31 [ 11.274345] Bluetooth: HCI device and connection manager initialized [ 11.274347] Bluetooth: HCI socket layer initialized [ 11.274349] Bluetooth: L2CAP socket layer initialized [ 11.274351] Bluetooth: SCO socket layer initialized [ 11.412174] usbcore: registered new interface driver btusb [ 11.422302] mc: Linux media interface: v0.10 [ 11.455453] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.456644] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.500528] videodev: Linux video capture interface: v2.00 [ 11.655190] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 11.655191] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 11.655192] RAPL PMU: hw unit of domain package 2^-14 Joules [ 11.655192] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 11.655192] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 11.698627] MXM: GUID detected in BIOS [ 11.698715] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190703/nsarguments-66) [ 11.699067] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 11.699070] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle [ 11.699262] nouveau 0000:04:00.0: NVIDIA GF117 (0d7000a2) [ 11.727708] nouveau 0000:04:00.0: bios: version 75.17.81.00.17 [ 11.743923] ath: phy0: WB335 1-ANT card detected [ 11.743925] ath: phy0: Set BT/WLAN RX diversity capability [ 11.753352] ath: phy0: Enable LNA combining [ 11.754588] ath: phy0: ASPM enabled: 0x43 [ 11.754589] ath: EEPROM regdomain: 0x6a [ 11.754589] ath: EEPROM indicates we should expect a direct regpair map [ 11.754590] ath: Country alpha2 being used: 00 [ 11.754591] ath: Regpair used: 0x6a [ 11.755435] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.755774] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb28480880000, irq=19 [ 11.804187] cryptd: max_cpu_qlen set to 1000 [ 11.810548] nouveau 0000:04:00.0: fb: 2048 MiB DDR3 [ 11.913273] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b483) [ 12.007850] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 12.007852] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.007854] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 12.007854] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 12.007855] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 12.007857] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b [ 12.017628] uvcvideo 1-5:1.0: Entity type for entity Extension 2 was not initialized! [ 12.017630] uvcvideo 1-5:1.0: Entity type for entity Extension 5 was not initialized! [ 12.017632] uvcvideo 1-5:1.0: Entity type for entity Processing 3 was not initialized! [ 12.017634] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 12.017731] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input26 [ 12.017801] usbcore: registered new interface driver uvcvideo [ 12.017802] USB Video Class driver (1.1.1) [ 12.037108] AVX2 version of gcm_enc/dec engaged. [ 12.037108] AES CTR mode by8 optimization enabled [ 12.063581] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input27 [ 12.103982] usb 1-6: USB disconnect, device number 4 [ 12.104372] usbcore: registered new interface driver ath3k [ 12.416744] usb 1-6: new full-speed USB device number 6 using xhci_hcd [ 12.459247] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 12.483725] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input28 [ 12.483803] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input29 [ 12.483863] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input30 [ 12.483927] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input31 [ 12.484002] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input32 [ 13.101406] vga_switcheroo: enabled [ 13.101630] [TTM] Zone kernel: Available graphics memory: 4026762 KiB [ 13.101631] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 13.101632] [TTM] Initializing pool allocator [ 13.101638] [TTM] Initializing DMA pool allocator [ 13.101671] nouveau 0000:04:00.0: DRM: VRAM: 2048 MiB [ 13.101673] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB [ 13.101678] nouveau 0000:04:00.0: DRM: Pointer to TMDS table invalid [ 13.101679] nouveau 0000:04:00.0: DRM: DCB version 4.0 [ 13.104399] nouveau 0000:04:00.0: DRM: MM: using COPY0 for buffer copies [ 13.108220] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1 [ 13.546490] intel_rapl_common: Found RAPL domain package [ 13.546491] intel_rapl_common: Found RAPL domain core [ 13.546493] intel_rapl_common: Found RAPL domain uncore [ 13.546494] intel_rapl_common: Found RAPL domain dram [ 13.546497] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 13.546503] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 14.089840] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 17.601871] usb 1-6: New USB device found, idVendor=13d3, idProduct=3423, bcdDevice= 0.02 [ 17.601873] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 19.353209] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM [ 19.756779] Adding 15630332k swap on /dev/sda8. Priority:-2 extents:1 across:15630332k FS [ 20.776886] nouveau 0000:04:00.0: Enabling HDA controller [ 23.961752] audit: type=1400 audit(1591206604.735:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=887 comm="apparmor_parser" [ 23.961755] audit: type=1400 audit(1591206604.735:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=887 comm="apparmor_parser" [ 23.961757] audit: type=1400 audit(1591206604.735:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=887 comm="apparmor_parser" [ 23.973806] audit: type=1400 audit(1591206604.747:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=888 comm="apparmor_parser" [ 23.981688] audit: type=1400 audit(1591206604.755:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=890 comm="apparmor_parser" [ 24.039635] audit: type=1400 audit(1591206604.811:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=891 comm="apparmor_parser" [ 24.039639] audit: type=1400 audit(1591206604.811:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=891 comm="apparmor_parser" [ 24.052175] audit: type=1400 audit(1591206604.823:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=892 comm="apparmor_parser" [ 24.053218] audit: type=1400 audit(1591206604.827:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=884 comm="apparmor_parser" [ 24.053221] audit: type=1400 audit(1591206604.827:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=884 comm="apparmor_parser" [ 26.342264] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.342265] Bluetooth: BNEP filters: protocol multicast [ 26.342268] Bluetooth: BNEP socket layer initialized [ 33.269780] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM [ 35.058442] Generic Realtek PHY r8169-200:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 35.177375] r8169 0000:02:00.0 enp2s0: Link is Down [ 36.383851] wlp3s0: authenticate with f0:3e:90:01:28:d8 [ 36.396412] wlp3s0: send auth to f0:3e:90:01:28:d8 (try 1/3) [ 36.399059] wlp3s0: authenticated [ 36.400757] wlp3s0: associate with f0:3e:90:01:28:d8 (try 1/3) [ 36.404263] wlp3s0: RX AssocResp from f0:3e:90:01:28:d8 (capab=0x421 status=0 aid=4) [ 36.404365] wlp3s0: associated [ 36.404465] ath: EEPROM regdomain: 0x80fa [ 36.404466] ath: EEPROM indicates we should expect a country code [ 36.404469] ath: doing EEPROM country->regdmn map search [ 36.404471] ath: country maps to regdmn code: 0x37 [ 36.404472] ath: Country alpha2 being used: FR [ 36.404472] ath: Regpair used: 0x37 [ 36.404474] ath: regdomain 0x80fa dynamically updated by country element [ 36.404887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 38.600939] nouveau 0000:04:00.0: Enabling HDA controller [ 44.685851] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM [ 50.128900] nouveau 0000:04:00.0: Enabling HDA controller [ 50.465996] nouveau 0000:04:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ] [ 51.671403] Bluetooth: RFCOMM TTY layer initialized [ 51.671411] Bluetooth: RFCOMM socket layer initialized [ 51.671418] Bluetooth: RFCOMM ver 1.11 [ 54.008907] rfkill: input handler disabled [ 56.583285] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM [ 125.149210] usb 1-3: USB disconnect, device number 2 [ 138.979078] usb 1-3: new full-speed USB device number 7 using xhci_hcd [ 139.134170] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 139.134174] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 139.134177] usb 1-3: Product: USB Receiver [ 139.134180] usb 1-3: Manufacturer: Logitech [ 139.145511] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 [ 139.272549] input: Logitech M315/235/317 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0007/0003:046D:4009.0008/input/input33 [ 139.272734] logitech-hidpp-device 0003:046D:4009.0008: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/235/317] on usb-0000:00:14.0-3/input2:1 [ 182.163902] usb 1-3: USB disconnect, device number 7 [ 188.950179] usb 1-2: new full-speed USB device number 8 using xhci_hcd [ 189.102041] usb 1-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 189.102049] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 189.102055] usb 1-2: Product: USB Receiver [ 189.102059] usb 1-2: Manufacturer: Logitech [ 189.114399] logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 189.245850] input: Logitech M315/235/317 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.000B/0003:046D:4009.000C/input/input34 [ 189.246238] logitech-hidpp-device 0003:046D:4009.000C: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/235/317] on usb-0000:00:14.0-2/input2:1 [ 204.180337] usb 1-3: new high-speed USB device number 9 using xhci_hcd [ 204.209548] usb 1-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.06 [ 204.209554] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 204.209557] usb 1-3: SerialNumber: 012900705882 [ 204.315564] usb-storage 1-3:1.0: USB Mass Storage device detected [ 204.315690] scsi host4: usb-storage 1-3:1.0 [ 204.315790] usbcore: registered new interface driver usb-storage [ 204.327618] usbcore: registered new interface driver uas [ 205.318507] scsi 4:0:0:0: Direct-Access 8.07 PQ: 0 ANSI: 4 [ 205.319539] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 205.320026] sd 4:0:0:0: [sdb] 123699200 512-byte logical blocks: (63.3 GB/59.0 GiB) [ 205.320727] sd 4:0:0:0: [sdb] Write Protect is off [ 205.320734] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 205.321418] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 205.329804] sdb: sdb1 [ 205.331804] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 205.785844] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 218.888589] usb 1-3: USB disconnect, device number 9 [ 222.552364] usb 1-2: USB disconnect, device number 8 [ 229.438500] usb 1-3: new full-speed USB device number 10 using xhci_hcd [ 229.590414] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 229.590419] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 229.590422] usb 1-3: Product: USB Receiver [ 229.590425] usb 1-3: Manufacturer: Logitech [ 229.601938] logitech-djreceiver 0003:046D:C52B.000F: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 [ 229.728794] input: Logitech M315/235/317 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.000F/0003:046D:4009.0010/input/input35 [ 229.729283] logitech-hidpp-device 0003:046D:4009.0010: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/235/317] on usb-0000:00:14.0-3/input2:1 [ 616.532562] wlp3s0: authenticate with f0:3e:90:02:af:98 [ 616.549720] wlp3s0: send auth to f0:3e:90:02:af:98 (try 1/3) [ 616.763972] wlp3s0: authenticated [ 616.766532] wlp3s0: associate with f0:3e:90:02:af:98 (try 1/3) [ 616.774926] wlp3s0: RX AssocResp from f0:3e:90:02:af:98 (capab=0x421 status=0 aid=1) [ 616.775076] wlp3s0: associated [ 616.775249] ath: EEPROM regdomain: 0x80fa [ 616.775251] ath: EEPROM indicates we should expect a country code [ 616.775252] ath: doing EEPROM country->regdmn map search [ 616.775253] ath: country maps to regdmn code: 0x37 [ 616.775255] ath: Country alpha2 being used: FR [ 616.775256] ath: Regpair used: 0x37 [ 616.775258] ath: regdomain 0x80fa dynamically updated by country element [ 626.225904] wlp3s0: disconnect from AP f0:3e:90:02:af:98 for new auth to f0:3e:90:01:28:d8 [ 626.232778] wlp3s0: authenticate with f0:3e:90:01:28:d8 [ 626.245555] wlp3s0: send auth to f0:3e:90:01:28:d8 (try 1/3) [ 626.246578] wlp3s0: authenticated [ 626.250844] wlp3s0: associate with f0:3e:90:01:28:d8 (try 1/3) [ 626.256255] wlp3s0: RX ReassocResp from f0:3e:90:01:28:d8 (capab=0x421 status=0 aid=1) [ 626.256426] wlp3s0: associated [ 626.256545] ath: EEPROM regdomain: 0x80fa [ 626.256546] ath: EEPROM indicates we should expect a country code [ 626.256547] ath: doing EEPROM country->regdmn map search [ 626.256548] ath: country maps to regdmn code: 0x37 [ 626.256548] ath: Country alpha2 being used: FR [ 626.256549] ath: Regpair used: 0x37 [ 626.256550] ath: regdomain 0x80fa dynamically updated by country element [ 1087.519931] wlp3s0: authenticate with f0:3e:90:01:15:18 [ 1087.535001] wlp3s0: send auth to f0:3e:90:01:15:18 (try 1/3) [ 1087.536002] wlp3s0: authenticated [ 1087.538215] wlp3s0: associate with f0:3e:90:01:15:18 (try 1/3) [ 1087.543105] wlp3s0: RX AssocResp from f0:3e:90:01:15:18 (capab=0x421 status=0 aid=2) [ 1087.543257] wlp3s0: associated [ 1087.543391] ath: EEPROM regdomain: 0x80fa [ 1087.543392] ath: EEPROM indicates we should expect a country code [ 1087.543393] ath: doing EEPROM country->regdmn map search [ 1087.543394] ath: country maps to regdmn code: 0x37 [ 1087.543395] ath: Country alpha2 being used: FR [ 1087.543396] ath: Regpair used: 0x37 [ 1087.543397] ath: regdomain 0x80fa dynamically updated by country element [ 1094.827052] wlp3s0: authenticate with f0:3e:90:01:28:d8 [ 1094.841482] wlp3s0: send auth to f0:3e:90:01:28:d8 (try 1/3) [ 1094.844460] wlp3s0: authenticated [ 1094.847380] wlp3s0: associate with f0:3e:90:01:28:d8 (try 1/3) [ 1094.852901] wlp3s0: RX AssocResp from f0:3e:90:01:28:d8 (capab=0x421 status=0 aid=1) [ 1094.853049] wlp3s0: associated [ 1094.853181] ath: EEPROM regdomain: 0x80fa [ 1094.853182] ath: EEPROM indicates we should expect a country code [ 1094.853183] ath: doing EEPROM country->regdmn map search [ 1094.853183] ath: country maps to regdmn code: 0x37 [ 1094.853184] ath: Country alpha2 being used: FR [ 1094.853185] ath: Regpair used: 0x37 [ 1094.853186] ath: regdomain 0x80fa dynamically updated by country element [ 1467.533698] wlp3s0: authenticate with f0:3e:90:01:15:18 [ 1467.546299] wlp3s0: send auth to f0:3e:90:01:15:18 (try 1/3) [ 1467.571435] wlp3s0: authenticated [ 1467.573679] wlp3s0: associate with f0:3e:90:01:15:18 (try 1/3) [ 1467.575470] wlp3s0: RX AssocResp from f0:3e:90:01:15:18 (capab=0x421 status=0 aid=3) [ 1467.575574] wlp3s0: associated [ 1467.575711] ath: EEPROM regdomain: 0x80fa [ 1467.575712] ath: EEPROM indicates we should expect a country code [ 1467.575713] ath: doing EEPROM country->regdmn map search [ 1467.575714] ath: country maps to regdmn code: 0x37 [ 1467.575715] ath: Country alpha2 being used: FR [ 1467.575716] ath: Regpair used: 0x37 [ 1467.575717] ath: regdomain 0x80fa dynamically updated by country element [ 1473.980252] wlp3s0: disconnect from AP f0:3e:90:01:15:18 for new auth to f0:3e:90:01:28:d8 [ 1473.992001] wlp3s0: authenticate with f0:3e:90:01:28:d8 [ 1474.004869] wlp3s0: send auth to f0:3e:90:01:28:d8 (try 1/3) [ 1474.010929] wlp3s0: authenticated [ 1474.017842] wlp3s0: associate with f0:3e:90:01:28:d8 (try 1/3) [ 1474.019391] wlp3s0: RX ReassocResp from f0:3e:90:01:28:d8 (capab=0x421 status=0 aid=1) [ 1474.019564] wlp3s0: associated [ 1474.019704] ath: EEPROM regdomain: 0x80fa [ 1474.019705] ath: EEPROM indicates we should expect a country code [ 1474.019705] ath: doing EEPROM country->regdmn map search [ 1474.019706] ath: country maps to regdmn code: 0x37 [ 1474.019707] ath: Country alpha2 being used: FR [ 1474.019708] ath: Regpair used: 0x37 [ 1474.019709] ath: regdomain 0x80fa dynamically updated by country element [ 1851.888060] wlp3s0: authenticate with f0:3e:90:01:2c:98 [ 1851.903939] wlp3s0: send auth to f0:3e:90:01:2c:98 (try 1/3) [ 1851.905810] wlp3s0: authenticated [ 1851.909640] wlp3s0: associate with f0:3e:90:01:2c:98 (try 1/3) [ 1851.920488] wlp3s0: RX AssocResp from f0:3e:90:01:2c:98 (capab=0x421 status=0 aid=1) [ 1851.920640] wlp3s0: associated [ 1851.920774] ath: EEPROM regdomain: 0x80fa [ 1851.920775] ath: EEPROM indicates we should expect a country code [ 1851.920776] ath: doing EEPROM country->regdmn map search [ 1851.920776] ath: country maps to regdmn code: 0x37 [ 1851.920777] ath: Country alpha2 being used: FR [ 1851.920778] ath: Regpair used: 0x37 [ 1851.920779] ath: regdomain 0x80fa dynamically updated by country element [ 1878.469932] wlp3s0: disconnect from AP f0:3e:90:01:2c:98 for new auth to f0:3e:90:01:28:d8 [ 1878.477809] wlp3s0: authenticate with f0:3e:90:01:28:d8 [ 1878.490635] wlp3s0: send auth to f0:3e:90:01:28:d8 (try 1/3) [ 1878.491592] wlp3s0: authenticated [ 1878.496792] wlp3s0: associate with f0:3e:90:01:28:d8 (try 1/3) [ 1878.499469] wlp3s0: RX ReassocResp from f0:3e:90:01:28:d8 (capab=0x421 status=0 aid=1) [ 1878.499636] wlp3s0: associated [ 1878.499769] ath: EEPROM regdomain: 0x80fa [ 1878.499770] ath: EEPROM indicates we should expect a country code [ 1878.499771] ath: doing EEPROM country->regdmn map search [ 1878.499771] ath: country maps to regdmn code: 0x37 [ 1878.499772] ath: Country alpha2 being used: FR [ 1878.499772] ath: Regpair used: 0x37 [ 1878.499773] ath: regdomain 0x80fa dynamically updated by country element [ 2386.519258] wlp3s0: authenticate with f0:3e:90:01:15:18 [ 2386.531924] wlp3s0: send auth to f0:3e:90:01:15:18 (try 1/3) [ 2386.539130] wlp3s0: authenticated [ 2386.540204] wlp3s0: associate with f0:3e:90:01:15:18 (try 1/3) [ 2386.600335] wlp3s0: RX AssocResp from f0:3e:90:01:15:18 (capab=0x421 status=0 aid=2) [ 2386.600500] wlp3s0: associated [ 2386.600759] ath: EEPROM regdomain: 0x80fa [ 2386.600761] ath: EEPROM indicates we should expect a country code [ 2386.600763] ath: doing EEPROM country->regdmn map search [ 2386.600765] ath: country maps to regdmn code: 0x37 [ 2386.600768] ath: Country alpha2 being used: FR [ 2386.600770] ath: Regpair used: 0x37 [ 2386.600773] ath: regdomain 0x80fa dynamically updated by country element [ 2398.292615] wlp3s0: disconnect from AP f0:3e:90:01:15:18 for new auth to f0:3e:90:01:28:d8 [ 2398.301719] wlp3s0: authenticate with f0:3e:90:01:28:d8 [ 2398.314534] wlp3s0: send auth to f0:3e:90:01:28:d8 (try 1/3) [ 2398.316279] wlp3s0: authenticated [ 2398.326192] wlp3s0: associate with f0:3e:90:01:28:d8 (try 1/3) [ 2398.376739] wlp3s0: RX ReassocResp from f0:3e:90:01:28:d8 (capab=0x421 status=0 aid=3) [ 2398.376914] wlp3s0: associated [ 2398.377102] ath: EEPROM regdomain: 0x80fa [ 2398.377103] ath: EEPROM indicates we should expect a country code [ 2398.377104] ath: doing EEPROM country->regdmn map search [ 2398.377105] ath: country maps to regdmn code: 0x37 [ 2398.377106] ath: Country alpha2 being used: FR [ 2398.377106] ath: Regpair used: 0x37 [ 2398.377107] ath: regdomain 0x80fa dynamically updated by country element