[ 0.000000] Linux version 2.6.24-5-generic (buildd@vernadsky) (gcc version 4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 24 19:45:21 UTC 2008 (Ubuntu 2.6.24-5.8-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fef0000 (usable) [ 0.000000] BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 894MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f3e60 [ 0.000000] Entering add_active_range(0, 0, 458480) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 458480 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 458480 [ 0.000000] On node 0 totalpages: 458480 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1789 pages used for memmap [ 0.000000] HighMem zone: 227315 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7E50 checksum 0 [ 0.000000] ACPI: RSDP 000F7E50, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 6FEF3000, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP 6FEF3080, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] [ 0.000000] ACPI: DSDT 6FEF3100, 7054 (r1 NVIDIA NVDAACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 6FEF1800, 0040 [ 0.000000] ACPI: SSDT 6FEFA240, 0206 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 6FEFA480, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 6FEFA4C0, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC 6FEFA180, 008E (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454899 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2100.049 MHz processor. [ 15.358528] spurious 8259A interrupt: IRQ7. [ 15.361419] Console: colour VGA+ 80x25 [ 15.361422] console [tty0] enabled [ 15.361721] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 15.362048] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 15.424631] Memory: 1805892k/1833920k available (2158k kernel code, 26856k reserved, 992k data, 364k init, 916416k highmem) [ 15.424638] virtual kernel memory layout: [ 15.424639] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 15.424640] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.424641] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 15.424642] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 15.424643] .init : 0xc0419000 - 0xc0474000 ( 364 kB) [ 15.424644] .data : 0xc031bb5d - 0xc0413dc4 ( 992 kB) [ 15.424645] .text : 0xc0100000 - 0xc031bb5d (2158 kB) [ 15.424648] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.424678] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 15.424805] hpet clockevent registered [ 15.504707] Calibrating delay using timer specific routine.. 4204.18 BogoMIPS (lpj=8408361) [ 15.504727] Security Framework initialized [ 15.504732] SELinux: Disabled at boot. [ 15.504745] AppArmor: AppArmor initialized [ 15.504748] Failure registering capabilities with primary security module. [ 15.504756] Mount-cache hash table entries: 512 [ 15.504858] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 15.504866] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.504868] CPU: L2 Cache: 512K (64 bytes/line) [ 15.504870] CPU 0(2) -> Core 0 [ 15.504872] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 15.504881] Compat vDSO mapped to ffffe000. [ 15.504890] Checking 'hlt' instruction... OK. [ 15.520924] SMP alternatives: switching to UP code [ 15.521981] Early unpacking initramfs... done [ 15.817674] ACPI: Core revision 20070126 [ 15.817735] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.822306] CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02 [ 15.822320] SMP alternatives: switching to SMP code [ 15.822697] Booting processor 1/1 eip 3000 [ 15.832897] Initializing CPU#1 [ 15.912393] Calibrating delay using timer specific routine.. 4200.02 BogoMIPS (lpj=8400059) [ 15.912399] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 15.912405] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.912407] CPU: L2 Cache: 512K (64 bytes/line) [ 15.912408] CPU 1(2) -> Core 1 [ 15.912410] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 15.912386] CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02 [ 15.912398] Total of 2 processors activated (8404.21 BogoMIPS). [ 15.912633] ENABLING IO-APIC IRQs [ 15.912849] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.060091] Brought up 2 CPUs [ 16.060134] CPU0 attaching sched-domain: [ 16.060137] domain 0: span 03 [ 16.060138] groups: 01 02 [ 16.060141] CPU1 attaching sched-domain: [ 16.060143] domain 0: span 03 [ 16.060144] groups: 02 01 [ 16.060315] net_namespace: 64 bytes [ 16.060320] Booting paravirtualized kernel on bare hardware [ 16.060769] Time: 18:57:09 Date: 02/04/08 [ 16.060812] NET: Registered protocol family 16 [ 16.060968] EISA bus registered [ 16.060972] ACPI: bus type pci registered [ 16.066649] PCI: PCI BIOS revision 3.00 entry at 0xfa3c0, last bus=8 [ 16.066651] PCI: Using configuration type 1 [ 16.066653] Setting up standard PCI resources [ 16.071873] ACPI: EC: Look up EC in DSDT [ 16.078097] ACPI: Interpreter enabled [ 16.078099] ACPI: (supports S0 S3 S4 S5) [ 16.078113] ACPI: Using IOAPIC for interrupt routing [ 16.087101] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.087854] PCI: Transparent bridge - 0000:00:08.0 [ 16.088246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.088603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 16.149224] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.149399] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) [ 16.149570] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 16.149740] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15) [ 16.149909] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.150078] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.150248] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.150417] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.150587] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.150757] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 16.150927] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 16.151097] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 16.151268] ACPI: PCI Interrupt Link [LU1B] (IRQs *5 7 9 10 11 14 15) [ 16.151439] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 *10 11 14 15) [ 16.151609] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 16.151780] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 16.151952] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.152124] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 16.152294] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.152465] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 16.152667] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 16.152862] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 16.153056] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 16.153249] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 16.153443] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 16.153637] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 16.153832] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 16.154026] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 16.154221] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 16.154416] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 16.154611] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 16.154810] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 16.155005] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 16.155200] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 16.155395] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 16.155591] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 16.155786] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 16.155989] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 16.156184] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 16.156379] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 16.156503] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.156528] pnp: PnP ACPI init [ 16.156534] ACPI: bus type pnp registered [ 16.161262] pnpacpi: exceeded the max number of mem resources: 12 [ 16.161323] pnp: PnP ACPI: found 11 devices [ 16.161325] ACPI: ACPI bus type pnp unregistered [ 16.161329] PnPBIOS: Disabled by ACPI PNP [ 16.161504] PCI: Using ACPI for IRQ routing [ 16.161508] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.271736] NET: Registered protocol family 8 [ 16.271738] NET: Registered protocol family 20 [ 16.271766] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 16.271770] hpet0: 3 32-bit timers, 25000000 Hz [ 16.272807] AppArmor: AppArmor Filesystem Enabled [ 16.275726] Time: hpet clocksource has been installed. [ 16.275738] Switched to high resolution mode on CPU 0 [ 16.276030] Switched to high resolution mode on CPU 1 [ 16.283707] system 00:01: ioport range 0x1000-0x107f has been reserved [ 16.283710] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 16.283712] system 00:01: ioport range 0x1400-0x147f has been reserved [ 16.283714] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 16.283717] system 00:01: ioport range 0x1800-0x187f has been reserved [ 16.283719] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 16.283723] system 00:01: iomem range 0xfec80000-0xfecbffff could not be reserved [ 16.283725] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved [ 16.283728] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved [ 16.283731] system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved [ 16.283736] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 16.283738] system 00:02: ioport range 0x290-0x30f has been reserved [ 16.283746] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 16.283751] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved [ 16.283754] system 00:0a: iomem range 0xfeff0000-0xfeff00ff could not be reserved [ 16.283757] system 00:0a: iomem range 0x6fef0000-0x6fefffff could not be reserved [ 16.283759] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved [ 16.283762] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 16.283764] system 00:0a: iomem range 0x100000-0x6feeffff could not be reserved [ 16.283767] system 00:0a: iomem range 0x70000000-0x7fffffff could not be reserved [ 16.283769] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 16.283772] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved [ 16.283775] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved [ 16.283777] system 00:0a: iomem range 0xfff80000-0xfff80fff could not be reserved [ 16.283780] system 00:0a: iomem range 0xfff90000-0xfffbffff could not be reserved [ 16.314125] PCI: Bridge: 0000:00:08.0 [ 16.314127] IO window: c000-cfff [ 16.314131] MEM window: fd000000-fd0fffff [ 16.314133] PREFETCH window: fdf00000-fdffffff [ 16.314136] PCI: Bridge: 0000:00:0b.0 [ 16.314138] IO window: b000-bfff [ 16.314140] MEM window: fde00000-fdefffff [ 16.314142] PREFETCH window: fdd00000-fddfffff [ 16.314145] PCI: Bridge: 0000:00:0c.0 [ 16.314146] IO window: a000-afff [ 16.314149] MEM window: fdc00000-fdcfffff [ 16.314151] PREFETCH window: fdb00000-fdbfffff [ 16.314153] PCI: Bridge: 0000:00:0d.0 [ 16.314155] IO window: 9000-9fff [ 16.314157] MEM window: fda00000-fdafffff [ 16.314159] PREFETCH window: fd900000-fd9fffff [ 16.314162] PCI: Bridge: 0000:00:0e.0 [ 16.314163] IO window: 8000-8fff [ 16.314166] MEM window: fd800000-fd8fffff [ 16.314168] PREFETCH window: fd700000-fd7fffff [ 16.314170] PCI: Bridge: 0000:00:0f.0 [ 16.314172] IO window: 7000-7fff [ 16.314174] MEM window: fd600000-fd6fffff [ 16.314176] PREFETCH window: fd500000-fd5fffff [ 16.314179] PCI: Bridge: 0000:00:10.0 [ 16.314180] IO window: 6000-6fff [ 16.314183] MEM window: fd400000-fd4fffff [ 16.314185] PREFETCH window: fd300000-fd3fffff [ 16.314187] PCI: Bridge: 0000:00:11.0 [ 16.314189] IO window: 5000-5fff [ 16.314191] MEM window: fd200000-fd2fffff [ 16.314193] PREFETCH window: fd100000-fd1fffff [ 16.314203] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 16.314211] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 16.314218] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 16.314224] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 16.314230] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 16.314236] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 16.314242] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 16.314249] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 16.314259] NET: Registered protocol family 2 [ 16.351656] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 16.351902] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.352525] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 16.352807] TCP: Hash tables configured (established 131072 bind 65536) [ 16.352810] TCP reno registered [ 16.363707] checking if image is initramfs... it is [ 16.935813] Freeing initrd memory: 7573k freed [ 16.936718] audit: initializing netlink socket (disabled) [ 16.936731] audit(1202151429.392:1): initialized [ 16.936891] highmem bounce pool size: 64 pages [ 16.938535] VFS: Disk quotas dquot_6.5.1 [ 16.938597] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.938702] io scheduler noop registered [ 16.938704] io scheduler anticipatory registered [ 16.938706] io scheduler deadline registered [ 16.938715] io scheduler cfq registered (default) [ 16.972033] Boot video device is 0000:00:12.0 [ 16.972137] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 16.972158] assign_interrupt_mode Found MSI capability [ 16.972176] Allocate Port Service[0000:00:0b.0:pcie00] [ 16.972237] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 16.972256] assign_interrupt_mode Found MSI capability [ 16.972270] Allocate Port Service[0000:00:0c.0:pcie00] [ 16.972321] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 16.972341] assign_interrupt_mode Found MSI capability [ 16.972355] Allocate Port Service[0000:00:0d.0:pcie00] [ 16.972407] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 16.972427] assign_interrupt_mode Found MSI capability [ 16.972440] Allocate Port Service[0000:00:0e.0:pcie00] [ 16.972494] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 16.972513] assign_interrupt_mode Found MSI capability [ 16.972527] Allocate Port Service[0000:00:0f.0:pcie00] [ 16.972578] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 16.972598] assign_interrupt_mode Found MSI capability [ 16.972612] Allocate Port Service[0000:00:10.0:pcie00] [ 16.972664] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 16.972683] assign_interrupt_mode Found MSI capability [ 16.972697] Allocate Port Service[0000:00:11.0:pcie00] [ 16.972890] isapnp: Scanning for PnP cards... [ 17.325071] isapnp: No Plug & Play device found [ 17.349981] Real Time Clock Driver v1.12ac [ 17.350165] hpet_resources: 0xfeff0000 is busy [ 17.350203] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.351199] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.351259] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.351342] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 17.351344] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 17.353946] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.353952] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.371539] mice: PS/2 mouse device common for all mice [ 17.371653] EISA: Probing bus 0 at eisa.0 [ 17.371658] Cannot allocate resource for EISA slot 1 [ 17.371667] Cannot allocate resource for EISA slot 5 [ 17.371669] Cannot allocate resource for EISA slot 6 [ 17.371671] Cannot allocate resource for EISA slot 7 [ 17.371673] Cannot allocate resource for EISA slot 8 [ 17.371674] EISA: Detected 0 cards. [ 17.371677] cpuidle: using governor ladder [ 17.371679] cpuidle: using governor menu [ 17.371751] NET: Registered protocol family 1 [ 17.371774] Using IPI No-Shortcut mode [ 17.371803] registered taskstats version 1 [ 17.371911] Magic number: 12:625:998 [ 17.371925] hash matches device ttyae [ 17.372030] hash matches device 00:00 [ 17.372264] Freeing unused kernel memory: 364k freed [ 18.600274] fuse init (API version 7.9) [ 18.605072] ACPI: Fan [FAN] (on) [ 18.609767] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 18.609779] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 18.808590] ACPI: Expecting a [Reference] package element, found type 74636573 [ 18.808593] ACPI: Invalid passive threshold [ 19.008228] ACPI: Thermal Zone [THRM] (40 C) [ 19.024552] md: linear personality registered for level -1 [ 19.029157] md: multipath personality registered for level -4 [ 19.033848] md: raid0 personality registered for level 0 [ 19.038746] md: raid1 personality registered for level 1 [ 19.043428] xor: automatically using best checksumming function: pIII_sse [ 19.060229] pIII_sse : 6336.000 MB/sec [ 19.060232] xor: using function: pIII_sse (6336.000 MB/sec) [ 19.060808] async_tx: api initialized (async) [ 19.128198] raid6: int32x1 790 MB/s [ 19.196054] raid6: int32x2 833 MB/s [ 19.263979] raid6: int32x4 796 MB/s [ 19.331973] raid6: int32x8 577 MB/s [ 19.399786] raid6: mmxx1 1701 MB/s [ 19.467708] raid6: mmxx2 3055 MB/s [ 19.535620] raid6: sse1x1 1691 MB/s [ 19.603510] raid6: sse1x2 2808 MB/s [ 19.671427] raid6: sse2x1 2817 MB/s [ 19.739327] raid6: sse2x2 3929 MB/s [ 19.739329] raid6: using algorithm sse2x2 (3929 MB/s) [ 19.739333] md: raid6 personality registered for level 6 [ 19.739334] md: raid5 personality registered for level 5 [ 19.739336] md: raid4 personality registered for level 4 [ 19.767538] md: raid10 personality registered for level 10 [ 20.208732] usbcore: registered new interface driver usbfs [ 20.208754] usbcore: registered new interface driver hub [ 20.209458] usbcore: registered new device driver usb [ 20.211413] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.211782] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 20.211791] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 16 [ 20.211802] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.211805] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 20.212070] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 20.212086] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000 [ 20.244332] SCSI subsystem initialized [ 20.268534] usb usb1: configuration #1 chosen from 1 choice [ 20.268558] hub 1-0:1.0: USB hub found [ 20.268566] hub 1-0:1.0: 6 ports detected [ 20.271976] libata version 3.00 loaded. [ 20.370724] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22 [ 20.370734] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AU1B] -> GSI 22 (level, low) -> IRQ 17 [ 20.370747] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 20.370751] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 20.370772] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 20.370787] ohci_hcd 0000:00:04.0: irq 17, io mem 0xfe02d000 [ 20.428304] usb usb2: configuration #1 chosen from 1 choice [ 20.428325] hub 2-0:1.0: USB hub found [ 20.428332] hub 2-0:1.0: 6 ports detected [ 20.530622] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21 [ 20.530634] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 21 (level, low) -> IRQ 18 [ 20.530645] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 20.530648] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 20.530673] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 20.530699] ehci_hcd 0000:00:02.1: debug port 1 [ 20.530702] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 20.530712] ehci_hcd 0000:00:02.1: irq 18, io mem 0xfe02e000 [ 20.542100] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.542179] usb usb3: configuration #1 chosen from 1 choice [ 20.542198] hub 3-0:1.0: USB hub found [ 20.542202] hub 3-0:1.0: 6 ports detected [ 20.646285] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20 [ 20.646293] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AU2B] -> GSI 20 (level, low) -> IRQ 19 [ 20.646303] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 20.646306] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 20.646325] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 20.646350] ehci_hcd 0000:00:04.1: debug port 1 [ 20.646353] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 20.646362] ehci_hcd 0000:00:04.1: irq 19, io mem 0xfe02c000 [ 20.657908] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.657974] usb usb4: configuration #1 chosen from 1 choice [ 20.657990] hub 4-0:1.0: USB hub found [ 20.657994] hub 4-0:1.0: 6 ports detected [ 20.761922] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 20.762002] ahci 0000:00:09.0: version 3.0 [ 20.762318] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 20.762323] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 [ 20.762882] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 20.762894] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20 [ 20.812619] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fd0ff000-fd0ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.257115] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 21.475200] usb 2-1: configuration #1 chosen from 1 choice [ 21.492639] usbcore: registered new interface driver hiddev [ 21.500270] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input1 [ 21.525990] input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:04.0-1 [ 21.541087] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input2 [ 21.553967] input,hiddev96,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:04.0-1 [ 21.553982] usbcore: registered new interface driver usbhid [ 21.553985] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 21.764451] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 21.764456] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 21.764460] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 21.764756] scsi0 : ahci [ 21.765000] scsi1 : ahci [ 21.765115] scsi2 : ahci [ 21.765229] scsi3 : ahci [ 21.765293] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 216 [ 21.765295] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 216 [ 21.765298] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 216 [ 21.765300] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 216 [ 22.080353] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d00009b332f] [ 22.403803] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.424327] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 22.424330] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 22.426295] ata1.00: configured for UDMA/133 [ 22.744348] ata2: SATA link down (SStatus 0 SControl 300) [ 23.383498] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 23.404008] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 23.404011] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 23.405986] ata3.00: configured for UDMA/133 [ 23.722052] ata4: SATA link down (SStatus 0 SControl 300) [ 23.721941] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 23.722283] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 23.722559] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 23.722907] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 23.722911] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17 [ 23.722916] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 24.241803] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:50:8d:b2:c0:e4 [ 24.241808] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 24.245960] pata_amd 0000:00:06.0: version 0.3.10 [ 24.246004] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 24.247153] scsi4 : pata_amd [ 24.247756] scsi5 : pata_amd [ 24.248272] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 24.248275] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 24.256393] Driver 'sd' needs updating - please use bus_type methods [ 24.256469] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 24.256480] sd 0:0:0:0: [sda] Write Protect is off [ 24.256482] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.256496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.256535] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 24.256543] sd 0:0:0:0: [sda] Write Protect is off [ 24.256545] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.256557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.256561] sda: sda1 sda2 sda3 [ 24.292105] sd 0:0:0:0: [sda] Attached SCSI disk [ 24.292157] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 24.292169] sd 2:0:0:0: [sdb] Write Protect is off [ 24.292171] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 24.292185] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.292223] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 24.292231] sd 2:0:0:0: [sdb] Write Protect is off [ 24.292233] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 24.292247] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.292250] sdb: sdb1 sdb2 sdb3 [ 24.309307] sd 2:0:0:0: [sdb] Attached SCSI disk [ 24.314062] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.314079] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 24.363416] md: md0 stopped. [ 24.469126] md: bind [ 24.469241] md: md1 stopped. [ 24.491827] md: md0 stopped. [ 24.491839] md: unbind [ 24.491846] md: export_rdev(sdb1) [ 24.496281] md: bind [ 24.496405] md: bind [ 24.506357] raid1: raid set md0 active with 2 out of 2 mirrors [ 24.506436] md: md1 stopped. [ 24.509461] md: bind [ 24.509582] md: bind [ 24.520018] raid1: raid set md1 active with 2 out of 2 mirrors [ 24.566342] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66 [ 24.608168] Attempting manual resume [ 24.608171] swsusp: Resume From Partition 8:2 [ 24.608173] PM: Checking swsusp image. [ 24.608326] PM: Resume from disk failed. [ 24.673747] kjournald starting. Commit interval 5 seconds [ 24.673762] EXT3-fs: mounted filesystem with ordered data mode. [ 24.729927] ata5.00: configured for UDMA/66 [ 24.729964] ata6: port disabled. ignoring. [ 24.730595] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5 [ 24.730666] scsi 4:0:0:0: Attached scsi generic sg2 type 5 [ 24.736833] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 24.736838] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 28.519423] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 29.187429] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.207002] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.382667] Linux agpgart interface v0.102 [ 29.422453] input: Power Button (FF) as /devices/virtual/input/input4 [ 29.474270] ACPI: Power Button (FF) [PWRF] [ 29.474334] input: Power Button (CM) as /devices/virtual/input/input5 [ 29.534204] ACPI: Power Button (CM) [PWRB] [ 29.682645] saa7146: register extension 'budget_ci dvb'. [ 29.683034] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 29.683044] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 [ 29.683051] PCI: Setting latency timer of device 0000:01:09.0 to 64 [ 29.683075] saa7146: found saa7146 @ mem f89ca000 (revision 1, irq 21) (0x13c2,0x1012). [ 29.683082] saa7146 (0): dma buffer size 192512 [ 29.683085] DVB: registering new adapter (TT-Budget-T-CI PCI) [ 29.715982] adapter has MAC addr = 00:d0:5c:07:d7:03 [ 29.716213] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:08.0/0000:01:09.0/input/input6 [ 29.866090] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 29.866479] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 29.866488] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 22 [ 29.866495] PCI: Setting latency timer of device 0000:01:0a.0 to 64 [ 29.866521] saa7146: found saa7146 @ mem f89cc000 (revision 1, irq 22) (0x13c2,0x1012). [ 29.866528] saa7146 (1): dma buffer size 192512 [ 29.866531] DVB: registering new adapter (TT-Budget-T-CI PCI) [ 29.899749] adapter has MAC addr = 00:d0:5c:07:d7:1a [ 29.899995] input: Budget-CI dvb ir receiver saa7146 (1) as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input7 [ 29.940348] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8 [ 29.973331] budget_ci: CI interface initialised [ 29.973560] DVB: registering frontend 1 (Philips TDA10046H DVB-T)... [ 30.557810] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 30.557816] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18 [ 30.557836] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 30.588690] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 30.677867] Driver 'sr' needs updating - please use bus_type methods [ 30.700274] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.700279] Uniform CD-ROM driver Revision: 3.20 [ 30.700335] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 31.189839] NET: Registered protocol family 10 [ 31.190026] lo: Disabled Privacy Extensions [ 32.225779] loop: module loaded [ 32.266036] lp: driver loaded but no devices found [ 32.382472] dvb_ca adapter 1: DVB CAM detected and initialised successfully [ 32.391017] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k [ 32.402644] Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k [ 32.665304] EXT3 FS on md0, internal journal [ 32.930156] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 32.931665] SGI XFS Quota Management subsystem [ 32.943108] Filesystem "md1": Disabling barriers, not supported by the underlying device [ 32.966436] XFS mounting filesystem md1 [ 33.105712] Ending clean XFS mount for filesystem: md1 [ 33.965024] No dock devices found. [ 34.112355] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 34.330705] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00) [ 34.330540] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xc [ 34.330544] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xd [ 34.330546] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xf [ 34.330548] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x16 [ 35.381379] ppdev: user-space parallel port driver [ 35.641415] audit(1202151448.504:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5415 profile="/usr/sbin/cupsd" namespace="default" [ 36.384869] Clocksource tsc unstable (delta = -136217129 ns) [ 36.868134] Bluetooth: Core ver 2.11 [ 36.868194] NET: Registered protocol family 31 [ 36.868196] Bluetooth: HCI device and connection manager initialized [ 36.868200] Bluetooth: HCI socket layer initialized [ 36.887966] Bluetooth: L2CAP ver 2.9 [ 36.887970] Bluetooth: L2CAP socket layer initialized [ 36.938113] Bluetooth: RFCOMM socket layer initialized [ 36.938127] Bluetooth: RFCOMM TTY layer initialized [ 36.938129] Bluetooth: RFCOMM ver 1.8 [ 38.720811] eth0: no IPv6 routers present