[ 0.000000] Linux version 2.6.24-5-generic (buildd@yellow) (gcc version 4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 24 19:29:14 UTC 2008 (Ubuntu 2.6.24-5.8-generic) [ 0.000000] Command line: root=/dev/md0 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fef0000 (usable) [ 0.000000] BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458480) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7E50 checksum 0 [ 0.000000] ACPI: RSDP 000F7E50, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 6FEF3000, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP 6FEF3080, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] [ 0.000000] ACPI: DSDT 6FEF3100, 7054 (r1 NVIDIA NVDAACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 6FEF1800, 0040 [ 0.000000] ACPI: SSDT 6FEFA240, 0206 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 6FEFA480, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 6FEFA4C0, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC 6FEFA180, 008E (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006fef0000 [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 458480) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000006fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 458480 [ 0.000000] On node 0 totalpages: 458382 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1221 pages reserved [ 0.000000] DMA zone: 2721 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6212 pages used for memmap [ 0.000000] DMA32 zone: 448172 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 450893 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/md0 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 15.764230] Marking TSC unstable due to TSCs unsynchronized [ 15.764232] time.c: Detected 2100.000 MHz processor. [ 15.767141] Console: colour VGA+ 80x25 [ 15.767144] console [tty0] enabled [ 15.767160] Checking aperture... [ 15.767162] CPU 0: aperture @ 5074000000 size 32 MB [ 15.767163] Aperture too small (32 MB) [ 15.773075] No AGP bridge found [ 15.787097] Memory: 1795832k/1833920k available (2460k kernel code, 37696k reserved, 1302k data, 316k init) [ 15.787127] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 15.866084] Calibrating delay using timer specific routine.. 4204.08 BogoMIPS (lpj=8408163) [ 15.866115] Security Framework initialized [ 15.866121] SELinux: Disabled at boot. [ 15.866133] AppArmor: AppArmor initialized [ 15.866136] Failure registering capabilities with primary security module. [ 15.866285] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 15.867329] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.867819] Mount-cache hash table entries: 256 [ 15.867941] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.867944] CPU: L2 Cache: 512K (64 bytes/line) [ 15.867946] CPU 0/0 -> Node 0 [ 15.867948] CPU: Physical Processor ID: 0 [ 15.867949] CPU: Processor Core ID: 0 [ 15.867971] SMP alternatives: switching to UP code [ 15.868518] Early unpacking initramfs... done [ 16.138006] ACPI: Core revision 20070126 [ 16.138075] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.183543] Using local APIC timer interrupts. [ 16.231105] APIC timer calibration result 12499994 [ 16.231107] Detected 12.499 MHz APIC timer. [ 16.231193] SMP alternatives: switching to SMP code [ 16.231644] Booting processor 1/2 APIC 0x1 [ 16.241958] Initializing CPU#1 [ 16.319240] Calibrating delay using timer specific routine.. 4199.99 BogoMIPS (lpj=8399987) [ 16.319246] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.319247] CPU: L2 Cache: 512K (64 bytes/line) [ 16.319249] CPU 1/1 -> Node 0 [ 16.319251] CPU: Physical Processor ID: 0 [ 16.319252] CPU: Processor Core ID: 1 [ 16.319348] AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02 [ 16.319150] Brought up 2 CPUs [ 16.319254] CPU0 attaching sched-domain: [ 16.319256] domain 0: span 03 [ 16.319258] groups: 01 02 [ 16.319261] domain 1: span 03 [ 16.319263] groups: 03 [ 16.319265] CPU1 attaching sched-domain: [ 16.319266] domain 0: span 03 [ 16.319268] groups: 02 01 [ 16.319270] domain 1: span 03 [ 16.319272] groups: 03 [ 16.319493] net_namespace: 120 bytes [ 16.319880] Time: 10:18:09 Date: 01/27/08 [ 16.319933] NET: Registered protocol family 16 [ 16.320111] ACPI: bus type pci registered [ 16.320177] PCI: Using configuration type 1 [ 16.321398] ACPI: EC: Look up EC in DSDT [ 16.328164] ACPI: Interpreter enabled [ 16.328166] ACPI: (supports S0 S3 S4 S5) [ 16.328181] ACPI: Using IOAPIC for interrupt routing [ 16.337790] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.338543] PCI: Transparent bridge - 0000:00:08.0 [ 16.338931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.339321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 16.402637] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.402816] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) [ 16.402995] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 16.403170] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15) [ 16.403344] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.403522] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.403700] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.403874] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.404048] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.404223] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 16.404397] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 16.404571] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 16.404744] ACPI: PCI Interrupt Link [LU1B] (IRQs *5 7 9 10 11 14 15) [ 16.404918] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 *10 11 14 15) [ 16.405092] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 16.405266] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 16.405438] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.405614] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 16.405786] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.405961] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 16.406170] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 16.406373] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 16.406572] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 16.406773] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 16.406983] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 16.407187] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 16.407389] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 16.407592] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 16.407795] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 16.407999] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 16.408207] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 16.408409] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 16.408610] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 16.408812] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 16.409014] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 16.409216] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 16.409417] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 16.409619] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 16.409821] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 16.410024] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 16.410160] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.410186] pnp: PnP ACPI init [ 16.410194] ACPI: bus type pnp registered [ 16.415174] pnpacpi: exceeded the max number of mem resources: 12 [ 16.415239] pnp: PnP ACPI: found 11 devices [ 16.415241] ACPI: ACPI bus type pnp unregistered [ 16.415453] PCI: Using ACPI for IRQ routing [ 16.415457] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.430876] NET: Registered protocol family 8 [ 16.430878] NET: Registered protocol family 20 [ 16.430960] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 16.430964] hpet0: 3 32-bit timers, 25000000 Hz [ 16.432018] AppArmor: AppArmor Filesystem Enabled [ 16.432035] ACPI: RTC can wake from S4 [ 16.434853] Time: hpet clocksource has been installed. [ 16.434864] Switched to high resolution mode on CPU 0 [ 16.435223] Switched to high resolution mode on CPU 1 [ 16.442843] system 00:01: ioport range 0x1000-0x107f has been reserved [ 16.442846] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 16.442849] system 00:01: ioport range 0x1400-0x147f has been reserved [ 16.442851] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 16.442853] system 00:01: ioport range 0x1800-0x187f has been reserved [ 16.442856] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 16.442859] system 00:01: iomem range 0xfec80000-0xfecbffff has been reserved [ 16.442862] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 16.442865] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 16.442867] system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved [ 16.442872] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 16.442875] system 00:02: ioport range 0x290-0x30f has been reserved [ 16.442883] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 16.442889] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved [ 16.442891] system 00:0a: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 16.442894] system 00:0a: iomem range 0x6fef0000-0x6fefffff could not be reserved [ 16.442896] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved [ 16.442899] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 16.442901] system 00:0a: iomem range 0x100000-0x6feeffff could not be reserved [ 16.442904] system 00:0a: iomem range 0x70000000-0x7fffffff could not be reserved [ 16.442906] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 16.442909] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved [ 16.442911] system 00:0a: iomem range 0xfefff000-0xfeffffff has been reserved [ 16.442914] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved [ 16.442916] system 00:0a: iomem range 0xfff90000-0xfffbffff has been reserved [ 16.443322] PCI: Bridge: 0000:00:08.0 [ 16.443324] IO window: c000-cfff [ 16.443327] MEM window: fd000000-fd0fffff [ 16.443330] PREFETCH window: fdf00000-fdffffff [ 16.443332] PCI: Bridge: 0000:00:0b.0 [ 16.443334] IO window: b000-bfff [ 16.443336] MEM window: fde00000-fdefffff [ 16.443338] PREFETCH window: fdd00000-fddfffff [ 16.443340] PCI: Bridge: 0000:00:0c.0 [ 16.443342] IO window: a000-afff [ 16.443344] MEM window: fdc00000-fdcfffff [ 16.443345] PREFETCH window: fdb00000-fdbfffff [ 16.443347] PCI: Bridge: 0000:00:0d.0 [ 16.443349] IO window: 9000-9fff [ 16.443351] MEM window: fda00000-fdafffff [ 16.443353] PREFETCH window: fd900000-fd9fffff [ 16.443355] PCI: Bridge: 0000:00:0e.0 [ 16.443356] IO window: 8000-8fff [ 16.443358] MEM window: fd800000-fd8fffff [ 16.443360] PREFETCH window: fd700000-fd7fffff [ 16.443362] PCI: Bridge: 0000:00:0f.0 [ 16.443364] IO window: 7000-7fff [ 16.443366] MEM window: fd600000-fd6fffff [ 16.443368] PREFETCH window: fd500000-fd5fffff [ 16.443370] PCI: Bridge: 0000:00:10.0 [ 16.443371] IO window: 6000-6fff [ 16.443373] MEM window: fd400000-fd4fffff [ 16.443375] PREFETCH window: fd300000-fd3fffff [ 16.443377] PCI: Bridge: 0000:00:11.0 [ 16.443379] IO window: 5000-5fff [ 16.443381] MEM window: fd200000-fd2fffff [ 16.443382] PREFETCH window: fd100000-fd1fffff [ 16.443392] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 16.443401] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 16.443407] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 16.443412] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 16.443418] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 16.443424] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 16.443429] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 16.443435] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 16.443447] NET: Registered protocol family 2 [ 16.478867] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.479589] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 16.481497] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 16.482009] TCP: Hash tables configured (established 262144 bind 65536) [ 16.482012] TCP reno registered [ 16.490906] checking if image is initramfs... it is [ 17.018635] Freeing initrd memory: 7523k freed [ 17.023344] audit: initializing netlink socket (disabled) [ 17.023356] audit(1201429089.220:1): initialized [ 17.025344] VFS: Disk quotas dquot_6.5.1 [ 17.025414] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.025544] io scheduler noop registered [ 17.025546] io scheduler anticipatory registered [ 17.025548] io scheduler deadline registered [ 17.025649] io scheduler cfq registered (default) [ 17.062736] Boot video device is 0000:00:12.0 [ 17.062892] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 17.062912] assign_interrupt_mode Found MSI capability [ 17.062929] Allocate Port Service[0000:00:0b.0:pcie00] [ 17.062986] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 17.063004] assign_interrupt_mode Found MSI capability [ 17.063018] Allocate Port Service[0000:00:0c.0:pcie00] [ 17.063069] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 17.063088] assign_interrupt_mode Found MSI capability [ 17.063102] Allocate Port Service[0000:00:0d.0:pcie00] [ 17.063154] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 17.063173] assign_interrupt_mode Found MSI capability [ 17.063186] Allocate Port Service[0000:00:0e.0:pcie00] [ 17.063243] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 17.063261] assign_interrupt_mode Found MSI capability [ 17.063275] Allocate Port Service[0000:00:0f.0:pcie00] [ 17.063325] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 17.063344] assign_interrupt_mode Found MSI capability [ 17.063357] Allocate Port Service[0000:00:10.0:pcie00] [ 17.063407] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 17.063426] assign_interrupt_mode Found MSI capability [ 17.063439] Allocate Port Service[0000:00:11.0:pcie00] [ 17.089763] Real Time Clock Driver v1.12ac [ 17.089966] hpet_resources: 0xfeff0000 is busy [ 17.090052] Linux agpgart interface v0.102 [ 17.090055] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.091340] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.091405] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.091488] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 17.091490] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 17.094574] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.094582] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.106776] mice: PS/2 mouse device common for all mice [ 17.106823] cpuidle: using governor ladder [ 17.106825] cpuidle: using governor menu [ 17.106963] NET: Registered protocol family 1 [ 17.107024] registered taskstats version 1 [ 17.107139] Magic number: 8:328:326 [ 17.107157] hash matches device ttyyf [ 17.107259] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.107270] Freeing unused kernel memory: 316k freed [ 17.248411] fuse init (API version 7.9) [ 17.253318] ACPI: Fan [FAN] (on) [ 17.257665] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 17.257676] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 17.657378] ACPI: Thermal Zone [THRM] (50 C) [ 17.672119] md: linear personality registered for level -1 [ 17.676239] md: multipath personality registered for level -4 [ 17.680552] md: raid0 personality registered for level 0 [ 17.685503] md: raid1 personality registered for level 1 [ 17.689762] xor: automatically using best checksumming function: generic_sse [ 17.709398] generic_sse: 6470.000 MB/sec [ 17.709400] xor: using function: generic_sse (6470.000 MB/sec) [ 17.709989] async_tx: api initialized (async) [ 17.777337] raid6: int64x1 2083 MB/s [ 17.845230] raid6: int64x2 2603 MB/s [ 17.913148] raid6: int64x4 2644 MB/s [ 17.981056] raid6: int64x8 2081 MB/s [ 18.048949] raid6: sse2x1 2929 MB/s [ 18.116859] raid6: sse2x2 3892 MB/s [ 18.184768] raid6: sse2x4 4060 MB/s [ 18.184769] raid6: using algorithm sse2x4 (4060 MB/s) [ 18.184773] md: raid6 personality registered for level 6 [ 18.184774] md: raid5 personality registered for level 5 [ 18.184776] md: raid4 personality registered for level 4 [ 18.209230] md: raid10 personality registered for level 10 [ 18.614883] usbcore: registered new interface driver usbfs [ 18.614903] usbcore: registered new interface driver hub [ 18.614961] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 18.614965] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 18.615492] usbcore: registered new device driver usb [ 18.615552] NFORCE-MCP67: IDE controller (0x10de:0x0560 rev 0xa1) at PCI slot 0000:00:06.0 [ 18.615574] NFORCE-MCP67: not 100% native mode: will probe irqs later [ 18.615577] NFORCE-MCP67: BIOS didn't set cable bits correctly. Enabling workaround. [ 18.615581] NFORCE-MCP67: 0000:00:06.0 (rev a1) UDMA133 controller [ 18.615586] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 18.615593] NFORCE-MCP67: IDE port disabled [ 18.615596] Probing IDE interface ide0... [ 18.669173] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 18.703083] SCSI subsystem initialized [ 18.741701] libata version 3.00 loaded. [ 20.022192] hda: TSSTcorp CDDVDW SH-S202J, ATAPI CD/DVD-ROM drive [ 20.022219] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 20.022383] hda: skipping word 93 validity check [ 20.022385] hda: UDMA/66 mode selected [ 20.022637] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 20.024016] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 20.024026] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 20.024191] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.024197] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 20.024443] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 20.024463] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 20.080134] usb usb1: configuration #1 chosen from 1 choice [ 20.080158] hub 1-0:1.0: USB hub found [ 20.080166] hub 1-0:1.0: 6 ports detected [ 20.182314] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22 [ 20.182325] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AU1B] -> GSI 22 (level, low) -> IRQ 22 [ 20.182504] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 20.182511] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 20.182562] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 20.182580] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000 [ 20.239893] usb usb2: configuration #1 chosen from 1 choice [ 20.239915] hub 2-0:1.0: USB hub found [ 20.239922] hub 2-0:1.0: 6 ports detected [ 20.342344] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 20.342709] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 20.342719] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 20.342725] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 20.645267] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 20.861415] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:50:8d:b2:c0:e4 [ 20.861420] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 20.862110] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 20 [ 20.862120] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 20 (level, low) -> IRQ 20 [ 20.862294] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 20.862301] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 20.862368] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 20.862396] ehci_hcd 0000:00:02.1: debug port 1 [ 20.862400] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 20.862410] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000 [ 20.863378] usb 2-1: configuration #1 chosen from 1 choice [ 20.872963] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.873078] usb usb3: configuration #1 chosen from 1 choice [ 20.873100] hub 3-0:1.0: USB hub found [ 20.873107] hub 3-0:1.0: 6 ports detected [ 20.885184] usbcore: registered new interface driver hiddev [ 20.892413] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input1 [ 20.905692] input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:04.0-1 [ 20.921233] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input2 [ 20.933663] input,hiddev96,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:04.0-1 [ 20.933674] usbcore: registered new interface driver usbhid [ 20.933677] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.977273] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 23 [ 20.977278] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AU2B] -> GSI 23 (level, low) -> IRQ 23 [ 20.977452] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 20.977459] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 20.977518] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 20.977548] ehci_hcd 0000:00:04.1: debug port 1 [ 20.977551] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 20.977557] ehci_hcd 0000:00:04.1: irq 23, io mem 0xfe02c000 [ 20.978005] usb 2-1: USB disconnect, address 2 [ 20.988811] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.988906] usb usb4: configuration #1 chosen from 1 choice [ 20.988929] hub 4-0:1.0: USB hub found [ 20.988934] hub 4-0:1.0: 6 ports detected [ 21.093218] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 21.093228] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 21.143336] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fd0ff000-fd0ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.145832] ahci 0000:00:09.0: version 3.0 [ 21.146293] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 21.146297] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 [ 21.628207] usb 2-1: new low speed USB device using ohci_hcd and address 3 [ 21.846115] usb 2-1: configuration #1 chosen from 1 choice [ 21.858216] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3 [ 21.880412] input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:04.0-1 [ 21.896016] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input4 [ 21.912417] input,hiddev96,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:04.0-1 [ 22.147524] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 22.147529] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 22.147532] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 22.148485] scsi0 : ahci [ 22.148742] scsi1 : ahci [ 22.148879] scsi2 : ahci [ 22.149020] scsi3 : ahci [ 22.149100] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 504 [ 22.149103] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 504 [ 22.149105] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 504 [ 22.149108] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 504 [ 22.411308] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d00009b332f] [ 22.786423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.807183] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 22.807187] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 22.809161] ata1.00: configured for UDMA/133 [ 23.125972] ata2: SATA link down (SStatus 0 SControl 300) [ 23.765126] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 23.785885] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 23.785889] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 23.787843] ata3.00: configured for UDMA/133 [ 24.104670] ata4: SATA link down (SStatus 0 SControl 300) [ 24.105022] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 24.105135] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 24.117412] Driver 'sd' needs updating - please use bus_type methods [ 24.117502] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 24.117514] sd 0:0:0:0: [sda] Write Protect is off [ 24.117517] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.117532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.117590] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 24.117598] sd 0:0:0:0: [sda] Write Protect is off [ 24.117600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.117613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.117617] sda:<6>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 24.126374] Uniform CD-ROM driver Revision: 3.20 [ 24.144342] sda1 sda2 sda3 [ 24.154571] sd 0:0:0:0: [sda] Attached SCSI disk [ 24.154642] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 24.154652] sd 2:0:0:0: [sdb] Write Protect is off [ 24.154655] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 24.154669] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.154708] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 24.154716] sd 2:0:0:0: [sdb] Write Protect is off [ 24.154718] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 24.154741] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.154745] sdb: sdb1 sdb2 sdb3 [ 24.189090] sd 2:0:0:0: [sdb] Attached SCSI disk [ 24.196879] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.196899] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 24.268064] md: md0 stopped. [ 24.340059] md: bind [ 24.340203] md: bind [ 24.349162] raid1: raid set md0 active with 2 out of 2 mirrors [ 24.350053] md: md1 stopped. [ 24.388984] md: md1 stopped. [ 24.391595] md: bind [ 24.391726] md: bind [ 24.400750] raid1: raid set md1 active with 2 out of 2 mirrors [ 24.412769] Attempting manual resume [ 24.412774] swsusp: Resume From Partition 8:2 [ 24.412775] PM: Checking swsusp image. [ 24.414073] PM: Resume from disk failed. [ 24.513021] kjournald starting. Commit interval 5 seconds [ 24.513273] EXT3-fs: mounted filesystem with ordered data mode. [ 28.673838] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 28.719064] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.818924] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 28.922734] input: Power Button (FF) as /devices/virtual/input/input6 [ 28.971004] ACPI: Power Button (FF) [PWRF] [ 28.971068] input: Power Button (CM) as /devices/virtual/input/input7 [ 29.034925] ACPI: Power Button (CM) [PWRB] [ 29.519304] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8 [ 29.670694] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 29.670699] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 29.670905] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 29.704750] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 29.831527] saa7146: register extension 'budget_ci dvb'. [ 29.831953] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 29.831964] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 29.831971] PCI: Setting latency timer of device 0000:01:09.0 to 64 [ 29.831998] saa7146: found saa7146 @ mem ffffc200008bc000 (revision 1, irq 17) (0x13c2,0x1012). [ 29.832006] saa7146 (0): dma buffer size 192512 [ 29.832009] DVB: registering new adapter (TT-Budget-T-CI PCI) [ 29.866253] adapter has MAC addr = 00:d0:5c:07:d7:03 [ 29.866555] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:08.0/0000:01:09.0/input/input9 [ 29.971138] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 29.971562] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 29.971572] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 29.971579] PCI: Setting latency timer of device 0000:01:0a.0 to 64 [ 29.971604] saa7146: found saa7146 @ mem ffffc200008be000 (revision 1, irq 18) (0x13c2,0x1012). [ 29.971610] saa7146 (1): dma buffer size 192512 [ 29.971612] DVB: registering new adapter (TT-Budget-T-CI PCI) [ 30.006562] adapter has MAC addr = 00:d0:5c:07:d7:1a [ 30.006859] input: Budget-CI dvb ir receiver saa7146 (1) as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input10 [ 30.069795] budget_ci: CI interface initialised [ 30.070039] DVB: registering frontend 1 (Philips TDA10046H DVB-T)... [ 30.283361] NET: Registered protocol family 10 [ 30.283607] lo: Disabled Privacy Extensions [ 31.321510] loop: module loaded [ 31.385462] lp: driver loaded but no devices found [ 31.624852] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k [ 31.636263] Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k [ 31.972895] EXT3 FS on md0, internal journal [ 32.314976] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 32.315425] SGI XFS Quota Management subsystem [ 32.321331] Filesystem "md1": Disabling barriers, not supported by the underlying device [ 32.348578] XFS mounting filesystem md1 [ 32.481659] dvb_ca adapter 1: DVB CAM detected and initialised successfully [ 32.520838] Ending clean XFS mount for filesystem: md1 [ 34.975245] No dock devices found. [ 37.707490] tda1004x: setting up plls for 53MHz sampling clock [ 37.770427] lirc_dev: IR Remote Control driver registered, at major 61 [ 37.774969] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3 [ 37.774976] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Venky Raju [ 37.775003] usbcore: registered new interface driver lirc_imon [ 37.832986] tda1004x: found firmware revision 20 -- ok [ 38.051033] tda1004x: setting up plls for 53MHz sampling clock [ 38.175958] tda1004x: found firmware revision 20 -- ok [ 40.706967] dvb_ca adapter 1: DVB CAM detected and initialised successfully [ 40.707601] eth0: no IPv6 routers present