dmesg [ 0.000000] Linux version 2.6.24-7-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu1)) #1 SMP Thu Feb 7 01:29:58 UTC 2008 (Ubuntu 2.6.24-7.12-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f670000 (usable) [ 0.000000] BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 118MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6ba0 [ 0.000000] Entering add_active_range(0, 0, 259696) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 259696 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 259696 [ 0.000000] On node 0 totalpages: 259696 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 236 pages used for memmap [ 0.000000] HighMem zone: 30084 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6AD0 checksum 0 [ 0.000000] ACPI: RSDP 000F6AD0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 3F675DE3, 007C (r1 Sony VAIO 6040000 PTL 0) [ 0.000000] ACPI: FACP 3F67CC06, 00F4 (r3 Sony VAIO 20070711 PTL 1) [ 0.000000] ACPI: DSDT 3F676A91, 60F1 (r1 Sony VAIO 20070711 PTL 20050624) [ 0.000000] ACPI: FACS 3F67DFC0, 0040 [ 0.000000] ACPI: APIC 3F67CCFA, 0068 (r1 Sony VAIO 20070711 PTL 5A) [ 0.000000] ACPI: HPET 3F67CD62, 0038 (r1 Sony VAIO 20070711 PTL 5A) [ 0.000000] ACPI: MCFG 3F67CD9A, 003C (r1 Sony VAIO 20070711 PTL 5A) [ 0.000000] ACPI: TCPA 3F67CDD6, 0032 (r1 Sony VAIO 20070711 PTL 5A52) [ 0.000000] ACPI: SLIC 3F67CE08, 0176 (r1 Sony VAIO 20070711 PTL 1000000) [ 0.000000] ACPI: APIC 3F67CF7E, 005A (r1 Sony VAIO 20070711 PTL 0) [ 0.000000] ACPI: BOOT 3F67CFD8, 0028 (r1 Sony VAIO 20070711 PTL 1) [ 0.000000] ACPI: SSDT 3F6765A4, 04ED (r1 Sony VAIO 20070711 PTL 20050624) [ 0.000000] ACPI: SSDT 3F676345, 025F (r1 Sony VAIO 20070711 PTL 20050624) [ 0.000000] ACPI: SSDT 3F675E5F, 04E6 (r1 Sony VAIO 20070711 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Sony [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257668 [ 0.000000] Kernel command line: root=UUID=13eb345d-5d59-4642-986f-9e55ca63a783 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1197.142 MHz processor. [ 36.654023] Console: colour VGA+ 80x25 [ 36.654028] console [tty0] enabled [ 36.654356] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 36.654868] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 36.690533] Memory: 1017676k/1038784k available (2159k kernel code, 20380k reserved, 996k data, 364k init, 121280k highmem) [ 36.690545] virtual kernel memory layout: [ 36.690546] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 36.690548] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 36.690550] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 36.690552] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 36.690554] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 36.690555] .data : 0xc031bc5d - 0xc0414dc4 ( 996 kB) [ 36.690557] .text : 0xc0100000 - 0xc031bc5d (2159 kB) [ 36.690564] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 36.690619] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 36.690829] hpet clockevent registered [ 36.770792] Calibrating delay using timer specific routine.. 2397.08 BogoMIPS (lpj=4794173) [ 36.770823] Security Framework initialized [ 36.770836] SELinux: Disabled at boot. [ 36.770858] AppArmor: AppArmor initialized [ 36.770863] Failure registering capabilities with primary security module. [ 36.770877] Mount-cache hash table entries: 512 [ 36.771059] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 00000000 [ 36.771073] monitor/mwait feature present. [ 36.771075] using mwait in idle threads. [ 36.771081] CPU: L1 I cache: 32K, L1 D cache: 32K [ 36.771084] CPU: L2 cache: 1024K [ 36.771090] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000 00000000 [ 36.771104] Compat vDSO mapped to ffffe000. [ 36.771123] Checking 'hlt' instruction... OK. [ 36.787363] SMP alternatives: switching to UP code [ 36.789888] Freeing SMP alternatives: 11k freed [ 36.790042] Early unpacking initramfs... done [ 37.297353] ACPI: Core revision 20070126 [ 37.297440] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.315169] CPU0: Intel(R) Celeron(R) M CPU 443 @ 1.20GHz stepping 0c [ 37.315202] Total of 1 processors activated (2397.08 BogoMIPS). [ 37.315409] ENABLING IO-APIC IRQs [ 37.315622] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 37.462461] Brought up 1 CPUs [ 37.462490] CPU0 attaching sched-domain: [ 37.462494] domain 0: span 01 [ 37.462496] groups: 01 [ 37.462709] net_namespace: 64 bytes [ 37.462721] Booting paravirtualized kernel on bare hardware [ 37.463390] Time: 6:32:37 Date: 02/10/08 [ 37.463456] NET: Registered protocol family 16 [ 37.463718] EISA bus registered [ 37.463726] ACPI: bus type pci registered [ 37.464268] PCI: PCI BIOS revision 2.10 entry at 0xfddef, last bus=10 [ 37.464272] PCI: Using configuration type 1 [ 37.464274] Setting up standard PCI resources [ 37.470004] ACPI: EC: Look up EC in DSDT [ 37.472328] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 37.472332] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 37.473117] ACPI: Interpreter enabled [ 37.473121] ACPI: (supports S0 S3 S4 S5) [ 37.473140] ACPI: Using IOAPIC for interrupt routing [ 37.477704] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 37.480540] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 37.480544] ACPI: EC: driver started in interrupt mode [ 37.480600] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.481626] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 37.481632] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 37.483639] PCI: Transparent bridge - 0000:00:1e.0 [ 37.483761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.484175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 37.484360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 37.484543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 37.484743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 37.484961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 37.496553] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [ 37.496692] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 37.496826] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 37.496959] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [ 37.497093] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [ 37.497228] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 37.497361] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 37.497493] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 37.497675] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.497720] pnp: PnP ACPI init [ 37.497730] ACPI: bus type pnp registered [ 37.500764] pnp: PnP ACPI: found 12 devices [ 37.500768] ACPI: ACPI bus type pnp unregistered [ 37.500775] PnPBIOS: Disabled by ACPI PNP [ 37.501096] PCI: Using ACPI for IRQ routing [ 37.501100] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.610377] NET: Registered protocol family 8 [ 37.610380] NET: Registered protocol family 20 [ 37.610427] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 37.610433] hpet0: 3 64-bit timers, 14318180 Hz [ 37.611769] AppArmor: AppArmor Filesystem Enabled [ 37.614321] Time: tsc clocksource has been installed. [ 37.614340] Switched to high resolution mode on CPU 0 [ 37.622325] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 37.622330] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 37.622335] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 37.622340] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 37.622344] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 37.622349] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 37.622353] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 37.622365] system 00:06: ioport range 0x680-0x6ff has been reserved [ 37.622369] system 00:06: ioport range 0x800-0x80f has been reserved [ 37.622373] system 00:06: ioport range 0x1000-0x107f has been reserved [ 37.622377] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 37.622381] system 00:06: ioport range 0x1640-0x164f has been reserved [ 37.622385] system 00:06: ioport range 0xfe00-0xfe01 has been reserved [ 37.653011] PCI: Bridge: 0000:00:1c.0 [ 37.653016] IO window: 2000-2fff [ 37.653025] MEM window: f6000000-f7ffffff [ 37.653031] PREFETCH window: f0000000-f1ffffff [ 37.653039] PCI: Bridge: 0000:00:1c.1 [ 37.653041] IO window: disabled. [ 37.653049] MEM window: fc000000-fc0fffff [ 37.653054] PREFETCH window: disabled. [ 37.653062] PCI: Bridge: 0000:00:1c.2 [ 37.653066] IO window: 3000-3fff [ 37.653073] MEM window: f8000000-f9ffffff [ 37.653079] PREFETCH window: f2000000-f3ffffff [ 37.653086] PCI: Bridge: 0000:00:1c.3 [ 37.653091] IO window: 4000-4fff [ 37.653098] MEM window: fa000000-fbffffff [ 37.653104] PREFETCH window: f4000000-f5ffffff [ 37.653121] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 37.653124] IO window: 00001400-000014ff [ 37.653132] IO window: 00001c00-00001cff [ 37.653138] PREFETCH window: 50000000-53ffffff [ 37.653144] MEM window: 54000000-57ffffff [ 37.653150] PCI: Bridge: 0000:00:1e.0 [ 37.653152] IO window: disabled. [ 37.653159] MEM window: fc100000-fc1fffff [ 37.653165] PREFETCH window: disabled. [ 37.653208] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.653219] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 37.653249] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 37.653257] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 37.653287] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 37.653295] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 37.653326] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 37.653334] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 37.653351] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 37.653373] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 37.653380] PCI: Setting latency timer of device 0000:09:04.0 to 64 [ 37.653398] NET: Registered protocol family 2 [ 37.690330] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 37.690656] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 37.691755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 37.692271] TCP: Hash tables configured (established 131072 bind 65536) [ 37.692276] TCP reno registered [ 37.702445] checking if image is initramfs... it is [ 38.699061] Freeing initrd memory: 7342k freed [ 38.699300] Simple Boot Flag at 0x36 set to 0x1 [ 38.700021] audit: initializing netlink socket (disabled) [ 38.700039] audit(1202625157.888:1): initialized [ 38.700279] highmem bounce pool size: 64 pages [ 38.702958] VFS: Disk quotas dquot_6.5.1 [ 38.703057] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 38.703246] io scheduler noop registered [ 38.703250] io scheduler anticipatory registered [ 38.703255] io scheduler deadline registered [ 38.703274] io scheduler cfq registered (default) [ 38.703289] Boot video device is 0000:00:02.0 [ 38.703546] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 38.703616] assign_interrupt_mode Found MSI capability [ 38.703681] Allocate Port Service[0000:00:1c.0:pcie00] [ 38.703732] Allocate Port Service[0000:00:1c.0:pcie02] [ 38.703863] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 38.703932] assign_interrupt_mode Found MSI capability [ 38.703987] Allocate Port Service[0000:00:1c.1:pcie00] [ 38.704034] Allocate Port Service[0000:00:1c.1:pcie02] [ 38.704162] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 38.704231] assign_interrupt_mode Found MSI capability [ 38.704286] Allocate Port Service[0000:00:1c.2:pcie00] [ 38.704332] Allocate Port Service[0000:00:1c.2:pcie02] [ 38.704460] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 38.704529] assign_interrupt_mode Found MSI capability [ 38.704584] Allocate Port Service[0000:00:1c.3:pcie00] [ 38.704632] Allocate Port Service[0000:00:1c.3:pcie02] [ 38.704983] isapnp: Scanning for PnP cards... [ 39.059054] isapnp: No Plug & Play device found [ 39.097985] Real Time Clock Driver v1.12ac [ 39.098296] hpet_resources: 0xfed00000 is busy [ 39.098326] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 39.100084] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 39.100185] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 39.100325] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 39.102713] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 39.102719] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 39.105798] mice: PS/2 mouse device common for all mice [ 39.105957] EISA: Probing bus 0 at eisa.0 [ 39.105967] Cannot allocate resource for EISA slot 1 [ 39.105971] Cannot allocate resource for EISA slot 2 [ 39.105974] Cannot allocate resource for EISA slot 3 [ 39.105977] Cannot allocate resource for EISA slot 4 [ 39.105996] EISA: Detected 0 cards. [ 39.106000] cpuidle: using governor ladder [ 39.106003] cpuidle: using governor menu [ 39.106122] NET: Registered protocol family 1 [ 39.106163] Using IPI No-Shortcut mode [ 39.106205] registered taskstats version 1 [ 39.106356] Magic number: 12:835:518 [ 39.106698] Freeing unused kernel memory: 364k freed [ 39.141574] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 40.427123] fuse init (API version 7.9) [ 40.442045] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 40.442054] ACPI: Processor [CPU0] (supports 8 throttling states) [ 40.442074] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 40.445182] ACPI: Thermal Zone [ATF0] (27 C) [ 40.446104] ACPI: Thermal Zone [DTS0] (19 C) [ 40.447021] ACPI: Thermal Zone [DTS1] (19 C) [ 41.447972] usbcore: registered new interface driver usbfs [ 41.448003] usbcore: registered new interface driver hub [ 41.452485] usbcore: registered new device driver usb [ 41.464477] USB Universal Host Controller Interface driver v3.0 [ 41.464553] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 41.464569] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 41.464575] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 41.464891] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 41.464933] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820 [ 41.465120] usb usb1: configuration #1 chosen from 1 choice [ 41.465153] hub 1-0:1.0: USB hub found [ 41.465161] hub 1-0:1.0: 2 ports detected [ 41.568515] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 41.568532] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 41.568539] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 41.568572] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 41.568611] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 41.568764] usb usb2: configuration #1 chosen from 1 choice [ 41.568795] hub 2-0:1.0: USB hub found [ 41.568802] hub 2-0:1.0: 2 ports detected [ 41.648393] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 41.648401] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 41.673973] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 41.673989] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 41.673995] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 41.674027] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 41.674065] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 [ 41.674218] usb usb3: configuration #1 chosen from 1 choice [ 41.674250] hub 3-0:1.0: USB hub found [ 41.674257] hub 3-0:1.0: 2 ports detected [ 41.776422] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 17 [ 41.776439] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 41.776446] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 41.776477] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 41.776512] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 [ 41.776657] usb usb4: configuration #1 chosen from 1 choice [ 41.776689] hub 4-0:1.0: USB hub found [ 41.776697] hub 4-0:1.0: 2 ports detected [ 41.880490] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22 [ 41.880509] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 41.880515] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 41.880548] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 41.884458] ehci_hcd 0000:00:1d.7: debug port 1 [ 41.884467] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 41.884481] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xfc544000 [ 41.900223] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 41.900397] usb usb5: configuration #1 chosen from 1 choice [ 41.900433] hub 5-0:1.0: USB hub found [ 41.900441] hub 5-0:1.0: 8 ports detected [ 42.005538] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 42.058323] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fc100000-fc1007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 42.079592] ICH7: IDE controller (0x8086:0x27df rev 0x02) at PCI slot 0000:00:1f.1 [ 42.079613] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 23 [ 42.079625] ICH7: not 100% native mode: will probe irqs later [ 42.079641] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio [ 42.079654] ICH7: IDE port disabled [ 42.079659] Probing IDE interface ide0... [ 42.683849] usb 5-5: new high speed USB device using ehci_hcd and address 2 [ 42.807770] Clocksource tsc unstable (delta = -347434715 ns) [ 42.812279] Time: hpet clocksource has been installed. [ 42.815652] usb 5-5: configuration #1 chosen from 1 choice [ 42.887946] hda: TOSHIBA MK8009GAH, ATA DISK drive [ 42.887989] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 42.888062] hda: UDMA/100 mode selected [ 42.888177] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 42.892515] usb 5-6: new high speed USB device using ehci_hcd and address 3 [ 42.919477] SCSI subsystem initialized [ 42.932999] libata version 3.00 loaded. [ 42.954834] hda: max request size: 512KiB [ 42.955183] hda: 156301488 sectors (80026 MB), CHS=16383/255/63 [ 42.955366] hda: cache flushes supported [ 42.955417] hda: hda1 hda2 < hda5 > [ 43.028837] usb 5-6: configuration #1 chosen from 1 choice [ 43.028989] hub 5-6:1.0: USB hub found [ 43.029084] hub 5-6:1.0: 3 ports detected [ 43.188385] ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603026e9a63] [ 43.207081] Attempting manual resume [ 43.207086] swsusp: Resume From Partition 3:5 [ 43.207089] PM: Checking swsusp image. [ 43.207334] PM: Resume from disk failed. [ 43.229939] EXT3-fs: INFO: recovery required on readonly filesystem. [ 43.229945] EXT3-fs: write access will be enabled during recovery. [ 43.611970] usb 5-8: new high speed USB device using ehci_hcd and address 5 [ 43.747582] usb 5-8: configuration #1 chosen from 1 choice [ 43.748742] usbcore: registered new interface driver libusual [ 43.756654] Initializing USB Mass Storage driver... [ 43.983747] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 44.156451] usb 4-1: configuration #1 chosen from 1 choice [ 44.169793] scsi0 : SCSI emulation for USB Mass Storage devices [ 44.170656] usb-storage: device found at 2 [ 44.170659] usb-storage: waiting for device to settle before scanning [ 44.375622] usb 5-6.1: new high speed USB device using ehci_hcd and address 6 [ 44.483946] usb 5-6.1: configuration #1 chosen from 1 choice [ 44.699433] usb 5-6.3: new low speed USB device using ehci_hcd and address 7 [ 44.813259] usb 5-6.3: configuration #1 chosen from 1 choice [ 44.814274] usbcore: registered new interface driver usb-storage [ 44.814279] USB Mass Storage support registered. [ 46.197119] kjournald starting. Commit interval 5 seconds [ 46.197138] EXT3-fs: hda1: orphan cleanup on readonly fs [ 46.197147] ext3_orphan_cleanup: deleting unreferenced inode 7405724 [ 46.226350] ext3_orphan_cleanup: deleting unreferenced inode 5063456 [ 46.226608] ext3_orphan_cleanup: deleting unreferenced inode 5063454 [ 46.226620] ext3_orphan_cleanup: deleting unreferenced inode 5063452 [ 46.226630] ext3_orphan_cleanup: deleting unreferenced inode 5063450 [ 46.226641] ext3_orphan_cleanup: deleting unreferenced inode 5063277 [ 46.226654] ext3_orphan_cleanup: deleting unreferenced inode 5063223 [ 46.226665] ext3_orphan_cleanup: deleting unreferenced inode 5063218 [ 46.226677] ext3_orphan_cleanup: deleting unreferenced inode 5063216 [ 46.234890] ext3_orphan_cleanup: deleting unreferenced inode 5063210 [ 46.234902] ext3_orphan_cleanup: deleting unreferenced inode 5063207 [ 46.234913] ext3_orphan_cleanup: deleting unreferenced inode 5063204 [ 46.234925] ext3_orphan_cleanup: deleting unreferenced inode 5063195 [ 46.234936] ext3_orphan_cleanup: deleting unreferenced inode 5063193 [ 46.234946] ext3_orphan_cleanup: deleting unreferenced inode 5063191 [ 46.235541] ext3_orphan_cleanup: deleting unreferenced inode 5062758 [ 46.268421] ext3_orphan_cleanup: deleting unreferenced inode 5030567 [ 46.304375] ext3_orphan_cleanup: deleting unreferenced inode 5014603 [ 46.907526] ext3_orphan_cleanup: deleting unreferenced inode 9224205 [ 46.921813] ext3_orphan_cleanup: deleting unreferenced inode 5013711 [ 46.921829] ext3_orphan_cleanup: deleting unreferenced inode 5013742 [ 46.941640] ext3_orphan_cleanup: deleting unreferenced inode 7045132 [ 46.941649] EXT3-fs: hda1: 22 orphan inodes deleted [ 46.941652] EXT3-fs: recovery complete. [ 46.971717] EXT3-fs: mounted filesystem with ordered data mode. [ 49.164751] usb-storage: device scan complete [ 49.166250] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.31 PQ: 0 ANSI: 0 [ 56.973294] Linux agpgart interface v0.102 [ 57.049867] agpgart: Detected an Intel 945GM Chipset. [ 57.050289] agpgart: Detected 7932K stolen memory. [ 57.108034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 57.184799] agpgart: AGP aperture is 256M @ 0xd0000000 [ 57.184834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 57.400414] intel_rng: FWH not detected [ 57.739378] iTCO_vendor_support: vendor-support=0 [ 57.807339] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 57.811398] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 57.811412] iTCO_wdt: No card detected [ 58.191465] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 58.874861] input: Lid Switch as /devices/virtual/input/input3 [ 58.882892] ACPI: Lid Switch [LID0] [ 58.882994] input: Power Button (CM) as /devices/virtual/input/input4 [ 58.898642] ACPI: Power Button (CM) [PWRB] [ 59.253257] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 59.253291] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 59.253424] sky2 0000:02:00.0: v1.20 addr 0xf6000000 irq 16 Yukon-EC Ultra (0xb4) rev 3 [ 59.254738] sky2 eth0: addr 00:13:a9:ff:2d:e6 [ 59.438958] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 59.438964] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 59.439186] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 59.439204] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 59.439234] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 60.098004] ricoh-mmc: Ricoh MMC Controller disabling driver [ 60.098009] ricoh-mmc: Copyright(c) Philip Langdale [ 60.732141] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 60.732157] tpm_inf_pnp: probe of 00:09 failed with error -22 [ 60.815491] input: PS/2 Mouse as /devices/virtual/input/input5 [ 60.842122] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 61.412385] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 61.445162] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 62.746710] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 62.746722] sony-laptop: detected Type3 model [ 62.770896] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/SNY6001:00/input/input8 [ 62.796417] input: Sony Vaio Jogdial as /devices/virtual/input/input9 [ 62.828309] sony-laptop: device allocated minor is 63 [ 62.832566] sony-laptop: Sony Notebook Control Driver v0.5. [ 63.556751] ACPI: AC Adapter [ACAD] (on-line) [ 63.633297] ACPI: Battery Slot [BAT1] (battery present) [ 63.853196] Linux video capture interface: v2.00 [ 63.919134] Driver 'sr' needs updating - please use bus_type methods [ 63.922704] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 63.922710] Uniform CD-ROM driver Revision: 3.20 [ 63.922787] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 63.936995] uvcvideo: Found UVC 1.00 device (05ca:183a) [ 63.946107] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 63.946544] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). [ 63.946550] uvcvideo: Failed to initialize the device (-5). [ 63.946596] usbcore: registered new interface driver uvcvideo [ 63.946600] USB Video Class driver (v0.1.0) [ 63.950930] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 65.057600] sky2 eth0: enabling interface [ 65.290363] Yenta: CardBus bridge found at 0000:09:04.0 [104d:900e] [ 65.317803] iwl3945: Radio Frequency Kill Switch is On: [ 65.317806] Kill switch must be turned off for wireless networking to work. [ 65.322718] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 65.332782] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 65.352773] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 65.380391] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC [ 65.415495] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 [ 65.415501] Socket status: 30000006 [ 65.415505] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 65.415514] pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff [ 65.438667] ricoh-mmc: Ricoh MMC controller found at 0000:09:04.3 [1180:0843] (rev 11) [ 65.438685] ricoh-mmc: Controller is now disabled. [ 65.438831] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 65.438861] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 65.521135] iwl3945: Tunable channels: 13 802.11bg, 12 802.11a channels [ 65.738752] NET: Registered protocol family 10 [ 65.739028] lo: Disabled Privacy Extensions [ 65.739503] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 66.497543] cs: IO port probe 0x100-0x3af: clean. [ 66.499454] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 66.500262] cs: IO port probe 0x820-0x8ff: clean. [ 66.500945] cs: IO port probe 0xc00-0xcf7: clean. [ 66.501813] cs: IO port probe 0xa00-0xaff: clean. [ 66.739692] lp: driver loaded but no devices found [ 66.987703] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 66.989584] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 67.054219] Adding 3004112k swap on /dev/hda5. Priority:-1 extents:1 across:3004112k [ 67.567361] EXT3 FS on hda1, internal journal [ 69.005350] PPP generic driver version 2.4.2 [ 69.040025] NET: Registered protocol family 17 [ 69.085506] NET: Registered protocol family 24 [ 69.704194] ACPI: ACPI Dock Station Driver [ 69.914823] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 71.938722] ip_tables: (C) 2000-2006 Netfilter Core Team [ 72.410033] ppdev: user-space parallel port driver [ 72.844082] audit(1202625193.282:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5017 profile="/usr/sbin/cupsd" namespace="default" [ 73.666100] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 73.666519] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 73.666931] sysfs: duplicate filename 'sonypi' can not be created [ 73.666936] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one() [ 73.666942] Pid: 5040, comm: modprobe Not tainted 2.6.24-7-generic #1 [ 73.666969] [] sysfs_add_one+0x9f/0xe0 [ 73.666990] [] create_dir+0x48/0x90 [ 73.667006] [] sysfs_create_dir+0x29/0x50 [ 73.667014] [] kobject_get+0xf/0x20 [ 73.667022] [] kobject_add+0x93/0x1b0 [ 73.667029] [] kobject_set_name+0x81/0xb0 [ 73.667041] [] device_add+0xa7/0x510 [ 73.667056] [] kobject_init+0x29/0x40 [ 73.667066] [] device_create+0x88/0xc0 [ 73.667078] [] misc_register+0xb4/0x150 [ 73.667095] [] sonypi_probe+0x254/0x610 [sonypi] [ 73.667107] [] sonypi_irq+0x0/0x2d0 [sonypi] [ 73.667133] [] platform_drv_probe+0xc/0x10 [ 73.667139] [] driver_probe_device+0x88/0x190 [ 73.667147] [] klist_next+0x55/0xb0 [ 73.667160] [] bus_for_each_drv+0x44/0x70 [ 73.667175] [] device_attach+0x86/0x90 [ 73.667179] [] __device_attach+0x0/0x10 [ 73.667188] [] bus_attach_device+0x45/0x90 [ 73.667202] [] device_add+0x418/0x510 [ 73.667224] [] platform_device_add+0xf7/0x150 [ 73.667229] [] kobject_init+0x29/0x40 [ 73.667238] [] device_initialize+0x69/0x90 [ 73.667245] [] platform_device_alloc+0x4e/0x70 [ 73.667257] [] sonypi_init+0x64/0x9f [sonypi] [ 73.667269] [] sys_init_module+0x126/0x19c0 [ 73.667322] [] acpi_bus_register_driver+0x0/0x38 [ 73.667347] [] sysenter_past_esp+0x6b/0xa9 [ 73.667372] ======================= [ 73.667376] kobject_add failed for sonypi with -EEXIST, don't try to register things with the same name in the same directory. [ 73.667383] Pid: 5040, comm: modprobe Not tainted 2.6.24-7-generic #1 [ 73.667389] [] kobject_add+0x113/0x1b0 [ 73.667397] [] kobject_set_name+0x81/0xb0 [ 73.667409] [] device_add+0xa7/0x510 [ 73.667422] [] kobject_init+0x29/0x40 [ 73.667432] [] device_create+0x88/0xc0 [ 73.667443] [] misc_register+0xb4/0x150 [ 73.667458] [] sonypi_probe+0x254/0x610 [sonypi] [ 73.667468] [] sonypi_irq+0x0/0x2d0 [sonypi] [ 73.667492] [] platform_drv_probe+0xc/0x10 [ 73.667497] [] driver_probe_device+0x88/0x190 [ 73.667506] [] klist_next+0x55/0xb0 [ 73.667517] [] bus_for_each_drv+0x44/0x70 [ 73.667531] [] device_attach+0x86/0x90 [ 73.667536] [] __device_attach+0x0/0x10 [ 73.667545] [] bus_attach_device+0x45/0x90 [ 73.667558] [] device_add+0x418/0x510 [ 73.667579] [] platform_device_add+0xf7/0x150 [ 73.667584] [] kobject_init+0x29/0x40 [ 73.667592] [] device_initialize+0x69/0x90 [ 73.667599] [] platform_device_alloc+0x4e/0x70 [ 73.667611] [] sonypi_init+0x64/0x9f [sonypi] [ 73.667622] [] sys_init_module+0x126/0x19c0 [ 73.667673] [] acpi_bus_register_driver+0x0/0x38 [ 73.667696] [] sysenter_past_esp+0x6b/0xa9 [ 73.667719] ======================= [ 73.667722] sonypi: misc_register failed [ 73.679280] sonypi: probe of sonypi failed with error -17 [ 81.244216] Bluetooth: Core ver 2.11 [ 81.244307] NET: Registered protocol family 31 [ 81.244310] Bluetooth: HCI device and connection manager initialized [ 81.244316] Bluetooth: HCI socket layer initialized [ 81.282311] Bluetooth: L2CAP ver 2.9 [ 81.282318] Bluetooth: L2CAP socket layer initialized [ 81.349150] Bluetooth: RFCOMM socket layer initialized [ 81.349168] Bluetooth: RFCOMM TTY layer initialized [ 81.349171] Bluetooth: RFCOMM ver 1.8 [ 86.349442] [drm] Initialized drm 1.1.0 20060810 [ 86.355129] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 86.355563] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 127.860443] UDF-fs: No VRS found [ 127.930863] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 129.958945] ISO 9660 Extensions: RRIP_1991A