[ 0.000000] Linux version 5.3.0-23-generic (buildd@lgw01-amd64-002) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #25-Ubuntu SMP Tue Nov 12 09:22:33 UTC 2019 (Ubuntu 5.3.0-23.25-generic 5.3.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=99c76891-c019-4681-afee-0266d099d50b ro persistent splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x217/0x2c0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dff5ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dff60000-0x00000000dff77fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dff78000-0x00000000dffbffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M5A88-M, BIOS 1702 05/01/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3599.870 MHz processor [ 0.009789] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.009791] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.017162] AGP: No AGP bridge found [ 0.017230] last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.017234] MTRR default type: uncachable [ 0.017235] MTRR fixed ranges enabled: [ 0.017236] 00000-9FFFF write-back [ 0.017237] A0000-EFFFF uncachable [ 0.017238] F0000-FFFFF write-protect [ 0.017238] MTRR variable ranges enabled: [ 0.017240] 0 base 000000000000 mask FFFF80000000 write-back [ 0.017241] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.017242] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.017242] 3 disabled [ 0.017243] 4 disabled [ 0.017243] 5 disabled [ 0.017244] 6 disabled [ 0.017244] 7 disabled [ 0.017245] TOM2: 000000041f000000 aka 16880M [ 0.018799] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.018965] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.018970] last_pfn = 0xdff60 max_arch_pfn = 0x400000000 [ 0.023663] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.031959] check: Scanning 1 areas for low memory corruption [ 0.031964] Using GB pages for direct mapping [ 0.031966] BRK [0x16f401000, 0x16f401fff] PGTABLE [ 0.031968] BRK [0x16f402000, 0x16f402fff] PGTABLE [ 0.031969] BRK [0x16f403000, 0x16f403fff] PGTABLE [ 0.032005] BRK [0x16f404000, 0x16f404fff] PGTABLE [ 0.032006] BRK [0x16f405000, 0x16f405fff] PGTABLE [ 0.032151] BRK [0x16f406000, 0x16f406fff] PGTABLE [ 0.032188] BRK [0x16f407000, 0x16f407fff] PGTABLE [ 0.032253] RAMDISK: [mem 0x2ef79000-0x337b3fff] [ 0.032263] ACPI: Early table checksum verification disabled [ 0.032267] ACPI: RSDP 0x00000000000FB630 000024 (v02 ACPIAM) [ 0.032271] ACPI: XSDT 0x00000000DFF60100 000054 (v01 050113 XSDT0946 20130501 MSFT 00000097) [ 0.032276] ACPI: FACP 0x00000000DFF60290 0000F4 (v03 050113 FACP0946 20130501 MSFT 00000097) [ 0.032281] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20190703/tbfadt-564) [ 0.032285] ACPI: DSDT 0x00000000DFF60460 00EFCE (v01 A1874 A1874001 00000001 INTL 20060113) [ 0.032289] ACPI: FACS 0x00000000DFF78000 000040 [ 0.032292] ACPI: FACS 0x00000000DFF78000 000040 [ 0.032294] ACPI: APIC 0x00000000DFF60390 00008C (v01 050113 APIC0946 20130501 MSFT 00000097) [ 0.032298] ACPI: MCFG 0x00000000DFF60420 00003C (v01 050113 OEMMCFG 20130501 MSFT 00000097) [ 0.032301] ACPI: OEMB 0x00000000DFF78040 000072 (v01 050113 OEMB0946 20130501 MSFT 00000097) [ 0.032304] ACPI: HPET 0x00000000DFF6F8B0 000038 (v01 050113 OEMHPET 20130501 MSFT 00000097) [ 0.032307] ACPI: SSDT 0x00000000DFF6F8F0 001714 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.032316] ACPI: Local APIC address 0xfee00000 [ 0.032412] No NUMA configuration found [ 0.032414] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.032423] NODE_DATA(0) allocated [mem 0x41efd5000-0x41effffff] [ 0.032727] Zone ranges: [ 0.032728] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032730] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.032731] Normal [mem 0x0000000100000000-0x000000041effffff] [ 0.032732] Device empty [ 0.032733] Movable zone start for each node [ 0.032737] Early memory node ranges [ 0.032738] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032739] node 0: [mem 0x0000000000100000-0x00000000dff5ffff] [ 0.032740] node 0: [mem 0x0000000100000000-0x000000041effffff] [ 0.032747] Zeroed struct page in unavailable ranges: 263 pages [ 0.032748] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff] [ 0.032750] On node 0 totalpages: 4189945 [ 0.032751] DMA zone: 64 pages used for memmap [ 0.032751] DMA zone: 21 pages reserved [ 0.032752] DMA zone: 3993 pages, LIFO batch:0 [ 0.032808] DMA32 zone: 14270 pages used for memmap [ 0.032808] DMA32 zone: 913248 pages, LIFO batch:63 [ 0.046011] Normal zone: 51136 pages used for memmap [ 0.046013] Normal zone: 3272704 pages, LIFO batch:63 [ 0.095384] ACPI: PM-Timer IO Port: 0x808 [ 0.095389] ACPI: Local APIC address 0xfee00000 [ 0.095402] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23 [ 0.095405] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.095407] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.095409] ACPI: IRQ0 used by override. [ 0.095410] ACPI: IRQ9 used by override. [ 0.095411] Using ACPI (MADT) for SMP configuration information [ 0.095413] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.095417] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.095428] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.095430] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.095431] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.095432] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff] [ 0.095432] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff] [ 0.095434] PM: Registered nosave memory: [mem 0xdff60000-0xdff77fff] [ 0.095435] PM: Registered nosave memory: [mem 0xdff78000-0xdffbffff] [ 0.095436] PM: Registered nosave memory: [mem 0xdffc0000-0xdfffffff] [ 0.095436] PM: Registered nosave memory: [mem 0xe0000000-0xff9fffff] [ 0.095437] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.095440] [mem 0xe0000000-0xff9fffff] available for PCI devices [ 0.095441] Booting paravirtualized kernel on bare hardware [ 0.095444] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.095449] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.096012] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.096019] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.096020] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.096044] Built 1 zonelists, mobility grouping on. Total pages: 4124454 [ 0.096045] Policy zone: Normal [ 0.096047] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=UUID=99c76891-c019-4681-afee-0266d099d50b ro persistent splash vt.handoff=7 [ 0.099157] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.100645] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.100676] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.112463] AGP: Checking aperture... [ 0.119834] AGP: No AGP bridge found [ 0.119836] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) [ 0.119838] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.119838] AGP: Please enable the IOMMU option in the BIOS setup [ 0.119839] AGP: This costs you 64MB of RAM [ 0.119842] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) [ 0.119844] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] [ 0.183151] Memory: 16232580K/16759780K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 527200K reserved, 0K cma-reserved) [ 0.183332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.183346] ftrace: allocating 43210 entries in 169 pages [ 0.204004] rcu: Hierarchical RCU implementation. [ 0.204005] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.204007] Tasks RCU enabled. [ 0.204008] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.204009] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.207201] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.207518] spurious 8259A interrupt: IRQ7. [ 0.207534] vt handoff: transparent VT on vt#7 [ 0.207538] Console: colour dummy device 80x25 [ 0.207580] printk: console [tty0] enabled [ 0.207596] ACPI: Core revision 20190703 [ 0.207736] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.207749] APIC: Switch to symmetric I/O mode setup [ 0.208166] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.227751] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e3d8b5646, max_idle_ns: 440795328502 ns [ 0.227755] Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.74 BogoMIPS (lpj=14399480) [ 0.227757] pid_max: default: 32768 minimum: 301 [ 0.227789] LSM: Security Framework initializing [ 0.227801] Yama: becoming mindful. [ 0.227853] AppArmor: AppArmor initialized [ 0.227936] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.227987] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.228139] *** VALIDATE proc *** [ 0.228193] *** VALIDATE cgroup1 *** [ 0.228194] *** VALIDATE cgroup2 *** [ 0.228238] LVT offset 1 assigned for vector 0xf9 [ 0.228243] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.228244] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.228247] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.228249] Spectre V2 : Mitigation: Full AMD retpoline [ 0.228250] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.228251] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.228252] Spectre V2 : User space: Vulnerable [ 0.228254] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.228445] Freeing SMP alternatives memory: 36K [ 0.342280] smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.342402] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.342406] ... version: 0 [ 0.342407] ... bit width: 48 [ 0.342408] ... generic registers: 6 [ 0.342409] ... value mask: 0000ffffffffffff [ 0.342410] ... max period: 00007fffffffffff [ 0.342410] ... fixed-purpose events: 0 [ 0.342411] ... event mask: 000000000000003f [ 0.342448] rcu: Hierarchical SRCU implementation. [ 0.343000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.343103] smp: Bringing up secondary CPUs ... [ 0.343226] x86: Booting SMP configuration: [ 0.343227] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.375815] smp: Brought up 1 node, 8 CPUs [ 0.375815] smpboot: Max logical packages: 1 [ 0.375815] smpboot: Total of 8 processors activated (57597.92 BogoMIPS) [ 0.380591] devtmpfs: initialized [ 0.380591] x86/mm: Memory block size: 128MB [ 0.385493] PM: Registering ACPI NVS region [mem 0xdff78000-0xdffbffff] (294912 bytes) [ 0.385493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.385493] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.385493] pinctrl core: initialized pinctrl subsystem [ 0.385493] PM: RTC time: 03:46:10, date: 2019-11-17 [ 0.385493] NET: Registered protocol family 16 [ 0.385493] audit: initializing netlink subsys (disabled) [ 0.385493] audit: type=2000 audit(1573962370.176:1): state=initialized audit_enabled=0 res=1 [ 0.385493] EISA bus registered [ 0.385493] cpuidle: using governor ladder [ 0.385493] cpuidle: using governor menu [ 0.385493] ACPI: bus type PCI registered [ 0.385493] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.385493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.385493] PCI: not using MMCONFIG [ 0.385493] PCI: Using configuration type 1 for base access [ 0.385493] PCI: Using configuration type 1 for extended access [ 0.385493] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.385493] mtrr: probably your BIOS does not setup all CPUs. [ 0.385493] mtrr: corrected configuration. [ 0.388007] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388007] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391860] ACPI: Added _OSI(Module Device) [ 0.391860] ACPI: Added _OSI(Processor Device) [ 0.391860] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.391860] ACPI: Added _OSI(Processor Aggregator Device) [ 0.391860] ACPI: Added _OSI(Linux-Dell-Video) [ 0.391860] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.391860] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.402456] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.724538] ACPI: EC: EC started [ 0.724540] ACPI: EC: interrupt blocked [ 0.724623] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC [ 0.724625] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.724627] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.724628] ACPI: Interpreter enabled [ 0.724653] ACPI: (supports S0 S1 S3 S4 S5) [ 0.724655] ACPI: Using IOAPIC for interrupt routing [ 0.724686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.727119] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.727134] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.727773] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.736261] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.736267] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.736487] acpi PNP0A03:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.736695] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.737059] PCI host bridge to bus 0000:00 [ 0.737061] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.737063] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.737065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.737066] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.737068] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.737070] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.737081] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.737196] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.737216] pci 0000:00:02.0: enabling Extended Tags [ 0.737240] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.737332] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.737351] pci 0000:00:07.0: enabling Extended Tags [ 0.737374] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.737461] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.737480] pci 0000:00:0a.0: enabling Extended Tags [ 0.737504] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.737597] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.737616] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007] [ 0.737624] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003] [ 0.737632] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007] [ 0.737640] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003] [ 0.737648] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f] [ 0.737656] pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff] [ 0.737771] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.737786] pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff] [ 0.737916] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.737934] pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff] [ 0.738003] pci 0000:00:12.2: supports D1 D2 [ 0.738004] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.738099] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.738114] pci 0000:00:13.0: reg 0x10: [mem 0xfcffd000-0xfcffdfff] [ 0.738243] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.738261] pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff] [ 0.738330] pci 0000:00:13.2: supports D1 D2 [ 0.738332] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.738423] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.738560] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.738581] pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit] [ 0.738638] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.738723] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.738860] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.738975] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.738990] pci 0000:00:14.5: reg 0x10: [mem 0xfcffc000-0xfcffcfff] [ 0.739118] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.739134] pci 0000:00:16.0: reg 0x10: [mem 0xfcff3000-0xfcff3fff] [ 0.739269] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.739287] pci 0000:00:16.2: reg 0x10: [mem 0xfcfff000-0xfcfff0ff] [ 0.739356] pci 0000:00:16.2: supports D1 D2 [ 0.739358] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.739446] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.739525] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.739604] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.739680] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.739762] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.739838] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.739951] pci 0000:01:00.0: [10de:1287] type 00 class 0x030000 [ 0.739965] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.739973] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.739981] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.739987] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f] [ 0.739993] pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref] [ 0.740079] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.740091] pci 0000:01:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff] [ 0.740197] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.740200] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.740202] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.740205] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.740252] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.740276] pci 0000:02:00.0: reg 0x10: [mem 0xfeaf0000-0xfeaf7fff 64bit] [ 0.740371] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.740446] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.740449] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.740504] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.740524] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.740544] pci 0000:03:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref] [ 0.740556] pci 0000:03:00.0: reg 0x20: [mem 0xfbff8000-0xfbffbfff 64bit pref] [ 0.740627] pci 0000:03:00.0: supports D1 D2 [ 0.740628] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740718] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.740721] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.740724] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.740734] pci_bus 0000:04: extended config space not accessible [ 0.740762] pci 0000:04:05.0: [168c:002d] type 00 class 0x008000 [ 0.740783] pci 0000:04:05.0: reg 0x10: [mem 0xfcbf0000-0xfcbfffff] [ 0.740876] pci 0000:04:05.0: PME# supported from D0 D3hot [ 0.740949] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.740954] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.740958] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.740959] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.740961] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.740963] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.740964] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.741888] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.741974] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15) [ 0.742064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.742153] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15) [ 0.742226] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 14 15) [ 0.742284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.742341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.742400] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.743757] ACPI: EC: interrupt unblocked [ 0.743757] ACPI: EC: event unblocked [ 0.743757] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.743757] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events [ 0.743949] SCSI subsystem initialized [ 0.743969] libata version 3.00 loaded. [ 0.743969] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.743969] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.743969] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.743969] vgaarb: loaded [ 0.743969] ACPI: bus type USB registered [ 0.743969] usbcore: registered new interface driver usbfs [ 0.743969] usbcore: registered new interface driver hub [ 0.743969] usbcore: registered new device driver usb [ 0.743969] pps_core: LinuxPPS API ver. 1 registered [ 0.743969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.743969] PTP clock support registered [ 0.743969] EDAC MC: Ver: 3.0.0 [ 0.743969] PCI: Using ACPI for IRQ routing [ 0.750639] PCI: pci_cache_line_size set to 64 bytes [ 0.750685] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 0.750686] e820: reserve RAM buffer [mem 0xdff60000-0xdfffffff] [ 0.750687] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.751768] NetLabel: Initializing [ 0.751768] NetLabel: domain hash size = 128 [ 0.751768] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.751768] NetLabel: unlabeled traffic allowed by default [ 0.751814] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.751818] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.755806] clocksource: Switched to clocksource tsc-early [ 0.770139] VFS: Disk quotas dquot_6.6.0 [ 0.770155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.770178] *** VALIDATE hugetlbfs *** [ 0.770276] AppArmor: AppArmor Filesystem Enabled [ 0.770300] pnp: PnP ACPI init [ 0.770507] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.770580] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.771324] pnp 00:02: [dma 0 disabled] [ 0.771568] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.772144] pnp 00:03: [dma 0 disabled] [ 0.772209] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.772347] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.772349] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.772353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.772629] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.772631] system 00:05: [io 0x040b] has been reserved [ 0.772633] system 00:05: [io 0x04d6] has been reserved [ 0.772634] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.772636] system 00:05: [io 0x0c14] has been reserved [ 0.772638] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.772639] system 00:05: [io 0x0c52] has been reserved [ 0.772641] system 00:05: [io 0x0c6c] has been reserved [ 0.772642] system 00:05: [io 0x0c6f] has been reserved [ 0.772644] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.772646] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.772647] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.772649] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.772651] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.772652] system 00:05: [io 0x0b00-0x0b3f] has been reserved [ 0.772654] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.772656] system 00:05: [io 0x0b00-0x0b1f] has been reserved [ 0.772657] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.772659] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.772661] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.772663] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.772665] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.772666] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.772670] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.772672] system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.772676] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.772943] system 00:06: [io 0x0230-0x023f] has been reserved [ 0.772945] system 00:06: [io 0x0290-0x029f] has been reserved [ 0.772947] system 00:06: [io 0x0300-0x030f] has been reserved [ 0.772948] system 00:06: [io 0x0a30-0x0a3f] has been reserved [ 0.772952] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.773040] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.773044] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.773221] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.773224] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.773226] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.773227] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.773229] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.773233] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.773349] pnp: PnP ACPI: found 9 devices [ 0.775074] thermal_sys: Registered thermal governor 'fair_share' [ 0.775075] thermal_sys: Registered thermal governor 'bang_bang' [ 0.775076] thermal_sys: Registered thermal governor 'step_wise' [ 0.775077] thermal_sys: Registered thermal governor 'user_space' [ 0.775078] thermal_sys: Registered thermal governor 'power_allocator' [ 0.779577] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.779616] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.779619] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.779622] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff] [ 0.779624] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.779627] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.779630] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.779634] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.779636] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.779639] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.779642] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.779646] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.779654] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.779655] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.779657] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.779659] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.779660] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.779661] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.779663] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff] [ 0.779664] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.779666] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.779668] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.779669] pci_bus 0000:03: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.779671] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.779672] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.779673] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.779675] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.779676] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.779678] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.779751] NET: Registered protocol family 2 [ 0.779912] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.780122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.780434] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.780510] TCP: Hash tables configured (established 131072 bind 65536) [ 0.780614] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.780689] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.780800] NET: Registered protocol family 1 [ 0.780804] NET: Registered protocol family 44 [ 1.578938] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x662 took 779407 usecs [ 1.610931] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x662 took 31045 usecs [ 1.642930] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x662 took 31047 usecs [ 1.674929] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x662 took 31240 usecs [ 1.675147] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.675160] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 1.675349] PCI: CLS 64 bytes, default 64 [ 1.675391] Trying to unpack rootfs image as initramfs... [ 1.913148] Freeing initrd memory: 73964K [ 1.913696] PCI-DMA: Disabling AGP. [ 1.913765] PCI-DMA: aperture base @ d4000000 size 65536 KB [ 1.913767] PCI-DMA: using GART IOMMU. [ 1.913768] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.916386] amd_uncore: AMD NB counters detected [ 1.916558] LVT offset 0 assigned for vector 0x400 [ 1.916623] perf: AMD IBS detected (0x000000ff) [ 1.916673] check: Scanning for low memory corruption every 60 seconds [ 1.918721] Initialise system trusted keyrings [ 1.918732] Key type blacklist registered [ 1.918782] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.920336] zbud: loaded [ 1.920727] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.920917] fuse: init (API version 7.31) [ 1.921027] Platform Keyring initialized [ 1.925752] Key type asymmetric registered [ 1.925754] Asymmetric key parser 'x509' registered [ 1.925763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.925819] io scheduler mq-deadline registered [ 1.926198] pcieport 0000:00:02.0: PME: Signaling with IRQ 24 [ 1.926307] pcieport 0000:00:07.0: PME: Signaling with IRQ 25 [ 1.926483] pcieport 0000:00:0a.0: PME: Signaling with IRQ 26 [ 1.926560] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.926618] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.926620] vesafb: scrolling: redraw [ 1.926621] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.926631] vesafb: framebuffer at 0xf9000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 1.926709] Console: switching to colour frame buffer device 80x30 [ 1.926718] fb0: VESA VGA frame buffer device [ 1.926808] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.926817] ACPI: Power Button [PWRB] [ 1.926851] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.926865] ACPI: Power Button [PWRF] [ 1.927824] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.948308] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.950039] Linux agpgart interface v0.103 [ 1.952652] loop: module loaded [ 1.952843] libphy: Fixed MDIO Bus: probed [ 1.952844] tun: Universal TUN/TAP device driver, 1.6 [ 1.952871] PPP generic driver version 2.4.2 [ 1.952903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.952905] ehci-pci: EHCI PCI platform driver [ 1.953030] QUIRK: Enable AMD PLL fix [ 1.953047] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.953053] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.953057] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.953065] ehci-pci 0000:00:12.2: debug port 1 [ 1.953102] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800 [ 1.967388] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.967451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.967453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.967458] usb usb1: Product: EHCI Host Controller [ 1.967460] usb usb1: Manufacturer: Linux 5.3.0-23-generic ehci_hcd [ 1.967461] usb usb1: SerialNumber: 0000:00:12.2 [ 1.967643] hub 1-0:1.0: USB hub found [ 1.967651] hub 1-0:1.0: 5 ports detected [ 1.967937] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.967942] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.967945] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.967955] ehci-pci 0000:00:13.2: debug port 1 [ 1.967981] ehci-pci 0000:00:13.2: irq 17, io mem 0xfcfff400 [ 1.983387] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.983435] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.983437] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.983439] usb usb2: Product: EHCI Host Controller [ 1.983440] usb usb2: Manufacturer: Linux 5.3.0-23-generic ehci_hcd [ 1.983441] usb usb2: SerialNumber: 0000:00:13.2 [ 1.983609] hub 2-0:1.0: USB hub found [ 1.983616] hub 2-0:1.0: 5 ports detected [ 1.983875] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.983882] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.983885] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.983894] ehci-pci 0000:00:16.2: debug port 1 [ 1.983920] ehci-pci 0000:00:16.2: irq 17, io mem 0xfcfff000 [ 1.999387] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.999430] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.999432] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.999434] usb usb3: Product: EHCI Host Controller [ 1.999435] usb usb3: Manufacturer: Linux 5.3.0-23-generic ehci_hcd [ 1.999436] usb usb3: SerialNumber: 0000:00:16.2 [ 1.999609] hub 3-0:1.0: USB hub found [ 1.999615] hub 3-0:1.0: 4 ports detected [ 1.999737] ehci-platform: EHCI generic platform driver [ 1.999747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.999750] ohci-pci: OHCI PCI platform driver [ 1.999876] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.999882] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.999906] ohci-pci 0000:00:12.0: irq 18, io mem 0xfcffe000 [ 2.035825] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.035828] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.035830] usb usb4: Product: OHCI PCI host controller [ 2.035831] usb usb4: Manufacturer: Linux 5.3.0-23-generic ohci_hcd [ 2.035832] usb usb4: SerialNumber: 0000:00:12.0 [ 2.035928] hub 4-0:1.0: USB hub found [ 2.035937] hub 4-0:1.0: 5 ports detected [ 2.036178] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.036183] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.036213] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffd000 [ 2.099903] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.099906] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.099908] usb usb5: Product: OHCI PCI host controller [ 2.099909] usb usb5: Manufacturer: Linux 5.3.0-23-generic ohci_hcd [ 2.099910] usb usb5: SerialNumber: 0000:00:13.0 [ 2.100072] hub 5-0:1.0: USB hub found [ 2.100080] hub 5-0:1.0: 5 ports detected [ 2.100314] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.100319] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.100335] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffc000 [ 2.127874] tsc: Refined TSC clocksource calibration: 3599.895 MHz [ 2.127907] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e3efb7707, max_idle_ns: 440795228933 ns [ 2.127998] clocksource: Switched to clocksource tsc [ 2.163908] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.163910] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.163912] usb usb6: Product: OHCI PCI host controller [ 2.163913] usb usb6: Manufacturer: Linux 5.3.0-23-generic ohci_hcd [ 2.163914] usb usb6: SerialNumber: 0000:00:14.5 [ 2.164114] hub 6-0:1.0: USB hub found [ 2.164122] hub 6-0:1.0: 2 ports detected [ 2.164329] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.164336] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.164353] ohci-pci 0000:00:16.0: irq 18, io mem 0xfcff3000 [ 2.227904] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.227907] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.227908] usb usb7: Product: OHCI PCI host controller [ 2.227909] usb usb7: Manufacturer: Linux 5.3.0-23-generic ohci_hcd [ 2.227911] usb usb7: SerialNumber: 0000:00:16.0 [ 2.228108] hub 7-0:1.0: USB hub found [ 2.228116] hub 7-0:1.0: 4 ports detected [ 2.228233] ohci-platform: OHCI generic platform driver [ 2.228242] uhci_hcd: USB Universal Host Controller Interface driver [ 2.228339] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.228345] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 2.232694] xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 [ 2.232913] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.232915] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.232917] usb usb8: Product: xHCI Host Controller [ 2.232918] usb usb8: Manufacturer: Linux 5.3.0-23-generic xhci-hcd [ 2.232919] usb usb8: SerialNumber: 0000:02:00.0 [ 2.233080] hub 8-0:1.0: USB hub found [ 2.233089] hub 8-0:1.0: 2 ports detected [ 2.233189] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.233192] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2.233194] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 2.233214] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.233235] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 2.233237] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.233238] usb usb9: Product: xHCI Host Controller [ 2.233239] usb usb9: Manufacturer: Linux 5.3.0-23-generic xhci-hcd [ 2.233241] usb usb9: SerialNumber: 0000:02:00.0 [ 2.233311] hub 9-0:1.0: USB hub found [ 2.233318] hub 9-0:1.0: 2 ports detected [ 2.233418] i8042: PNP: No PS/2 controller found. [ 2.233420] i8042: Probing ports directly. [ 2.233870] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.233874] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.234059] mousedev: PS/2 mouse device common for all mice [ 2.234185] rtc_cmos 00:01: RTC can wake from S4 [ 2.234309] rtc_cmos 00:01: registered as rtc0 [ 2.234331] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.234338] i2c /dev entries driver [ 2.234374] device-mapper: uevent: version 1.0.3 [ 2.234434] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 2.234451] platform eisa.0: Probing EISA bus 0 [ 2.234453] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.234455] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.234456] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.234458] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.234459] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.234461] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.234462] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.234463] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.234465] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.234466] platform eisa.0: EISA: Detected 0 cards [ 2.234638] ledtrig-cpu: registered to indicate activity on CPUs [ 2.234670] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.234855] NET: Registered protocol family 10 [ 2.244669] Segment Routing with IPv6 [ 2.244689] NET: Registered protocol family 17 [ 2.244743] Key type dns_resolver registered [ 2.245193] RAS: Correctable Errors collector initialized. [ 2.245197] microcode: microcode updated early to new patch_level=0x0600063e [ 2.245220] microcode: CPU0: patch_level=0x0600063e [ 2.245227] microcode: CPU1: patch_level=0x0600063e [ 2.245236] microcode: CPU2: patch_level=0x0600063e [ 2.245244] microcode: CPU3: patch_level=0x0600063e [ 2.245254] microcode: CPU4: patch_level=0x0600063e [ 2.245261] microcode: CPU5: patch_level=0x0600063e [ 2.245270] microcode: CPU6: patch_level=0x0600063e [ 2.245277] microcode: CPU7: patch_level=0x0600063e [ 2.245311] microcode: Microcode Update Driver: v2.2. [ 2.245319] sched_clock: Marking stable (2245026993, 279322)->(2452164655, -206858340) [ 2.245478] registered taskstats version 1 [ 2.245487] Loading compiled-in X.509 certificates [ 2.247717] Loaded X.509 cert 'Build time autogenerated kernel key: 07a4a1230dee4da1426113ec42b8ee6ee56f4c4c' [ 2.247796] zswap: loaded using pool lzo/zbud [ 2.256597] Key type big_key registered [ 2.260878] Key type encrypted registered [ 2.260889] AppArmor: AppArmor sha1 policy hashing enabled [ 2.260910] ima: No TPM chip found, activating TPM-bypass! [ 2.260916] ima: Allocated hash algorithm: sha1 [ 2.260922] No architecture policies found [ 2.260928] evm: Initialising EVM extended attributes: [ 2.260929] evm: security.selinux [ 2.260930] evm: security.SMACK64 [ 2.260931] evm: security.SMACK64EXEC [ 2.260931] evm: security.SMACK64TRANSMUTE [ 2.260932] evm: security.SMACK64MMAP [ 2.260933] evm: security.apparmor [ 2.260933] evm: security.ima [ 2.260934] evm: security.capability [ 2.260935] evm: HMAC attrs: 0x1 [ 2.261288] PM: Magic number: 11:858:765 [ 2.261296] usb usb5-port3: hash matches [ 2.261450] rtc_cmos 00:01: setting system clock to 2019-11-17T03:46:12 UTC (1573962372) [ 2.261684] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.264214] Freeing unused decrypted memory: 2040K [ 2.264940] Freeing unused kernel image memory: 2668K [ 2.291878] Write protecting the kernel read-only data: 22528k [ 2.292617] Freeing unused kernel image memory: 2008K [ 2.292998] Freeing unused kernel image memory: 1416K [ 2.304464] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.304467] Run /init as init process [ 2.383390] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20190703/utaddress-204) [ 2.383399] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20190703/utaddress-204) [ 2.383405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.384066] ahci 0000:00:11.0: version 3.0 [ 2.384326] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.384330] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.385438] scsi host0: ahci [ 2.387297] libphy: r8169: probed [ 2.387593] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, c8:60:00:ed:62:ef, XID 2c9, IRQ 35 [ 2.387596] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.387719] scsi host1: ahci [ 2.391774] scsi host2: ahci [ 2.397914] scsi host3: ahci [ 2.403769] scsi host4: ahci [ 2.405944] scsi host5: ahci [ 2.406015] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 19 [ 2.406018] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 19 [ 2.406020] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 19 [ 2.406022] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 19 [ 2.406024] ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff00 irq 19 [ 2.406026] ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff80 irq 19 [ 2.406120] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 2.551881] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 2.683337] usb 9-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.704550] usb 9-1: New USB device found, idVendor=0bc2, idProduct=3320, bcdDevice= 1.00 [ 2.704553] usb 9-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.704555] usb 9-1: Product: Expansion Desk [ 2.704556] usb 9-1: Manufacturer: Seagate [ 2.704557] usb 9-1: SerialNumber: NA4JNN0M [ 2.711480] usb-storage 9-1:1.0: USB Mass Storage device detected [ 2.711603] scsi host6: usb-storage 9-1:1.0 [ 2.711676] usbcore: registered new interface driver usb-storage [ 2.712960] usbcore: registered new interface driver uas [ 2.719626] ata3: SATA link down (SStatus 0 SControl 300) [ 2.719653] ata1: SATA link down (SStatus 0 SControl 300) [ 2.719766] ata4: SATA link down (SStatus 0 SControl 300) [ 2.747975] usb 4-1: New USB device found, idVendor=04f3, idProduct=01a4, bcdDevice= 9.17 [ 2.747977] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.747979] usb 4-1: Product: 2.4G RF Keyboard & Mouse [ 2.754171] hidraw: raw HID events driver (C) Jiri Kosina [ 2.771434] usbcore: registered new interface driver usbhid [ 2.771435] usbhid: USB HID core driver [ 2.773678] input: 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:04F3:01A4.0001/input/input5 [ 2.773752] hid-generic 0003:04F3:01A4.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G RF Keyboard & Mouse] on usb-0000:00:12.0-1/input0 [ 2.774120] input: 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:04F3:01A4.0002/input/input6 [ 2.774196] input: 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:04F3:01A4.0002/input/input7 [ 2.774254] input: 2.4G RF Keyboard & Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:04F3:01A4.0002/input/input8 [ 2.774304] input: 2.4G RF Keyboard & Mouse System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:04F3:01A4.0002/input/input9 [ 2.774393] hid-generic 0003:04F3:01A4.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G RF Keyboard & Mouse] on usb-0000:00:12.0-1/input1 [ 2.879884] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.879918] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.880102] ata2.00: ATAPI: MOSER BAER DH-20A6S, 7M73, max UDMA/100 [ 2.880785] ata2.00: configured for UDMA/100 [ 2.883850] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.884062] scsi 1:0:0:0: CD-ROM MOSER BAER DH-20A6S 7M73 PQ: 0 ANSI: 5 [ 2.896259] ata6.00: HPA detected: current 312579695, native 312581808 [ 2.896343] ata6.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133 [ 2.896345] ata6.00: 312579695 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.897443] ata6.00: configured for UDMA/133 [ 2.904047] ata5.00: ATA-8: WDC WD10EAVS-00D7B0, 01.01A01, max UDMA/133 [ 2.904050] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.905009] ata5.00: configured for UDMA/133 [ 2.946545] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.946552] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.946898] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.946967] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2.947171] scsi 4:0:0:0: Direct-Access ATA WDC WD10EAVS-00D 1A01 PQ: 0 ANSI: 5 [ 2.947343] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 2.947433] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.947450] sd 4:0:0:0: [sda] Write Protect is off [ 2.947454] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.947487] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.947511] scsi 5:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 3A01 PQ: 0 ANSI: 5 [ 2.947875] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.947924] sd 5:0:0:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB) [ 2.947945] sd 5:0:0:0: [sdb] Write Protect is off [ 2.947949] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.947984] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.963516] sdb: sdb1 [ 2.963847] sda: sda1 sda2 [ 2.964046] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.964268] sd 4:0:0:0: [sda] Attached SCSI disk [ 3.287882] usb 4-5: new full-speed USB device number 3 using ohci-pci [ 3.481002] usb 4-5: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00 [ 3.481010] usb 4-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.481015] usb 4-5: Product: 2.4G Mouse [ 3.488369] input: 2.4G Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:1EA7:0064.0003/input/input11 [ 3.488552] input: 2.4G Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:1EA7:0064.0003/input/input12 [ 3.488705] hid-generic 0003:1EA7:0064.0003: input,hiddev1,hidraw2: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:12.0-5/input0 [ 3.728425] scsi 6:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6 [ 3.728630] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.728851] sd 6:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.729179] sd 6:0:0:0: [sdc] Write Protect is off [ 3.729181] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3.729488] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.729915] random: fast init done [ 3.730758] sdc: sdc1 [ 3.730959] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.730970] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.730983] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.732190] sd 6:0:0:0: [sdc] Attached SCSI disk [ 37.942692] random: crng init done [ 37.942695] random: 7 urandom warning(s) missed due to ratelimiting [ 38.640564] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 40.965415] systemd[1]: Inserted module 'autofs4' [ 41.127742] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 41.148023] systemd[1]: Detected architecture x86-64. [ 41.234830] systemd[1]: Set hostname to . [ 41.249280] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 44.668865] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 44.867545] systemd[1]: /lib/systemd/system/vpnagentd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/vpnagentd.pid → /run/vpnagentd.pid; please update the unit file accordingly. [ 44.929562] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 45.520403] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 45.687093] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 45.896014] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. [ 46.182291] systemd[1]: Listening on udev Control Socket. [ 46.182437] systemd[1]: Listening on udev Kernel Socket. [ 46.203536] systemd[1]: Listening on Journal Socket. [ 46.229266] systemd[1]: Starting Load Kernel Modules... [ 46.230157] systemd[1]: Started Read required files in advance. [ 46.230445] systemd[1]: Listening on Journal Socket (/dev/log). [ 46.231438] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 46.231527] systemd[1]: Reached target Remote File Systems. [ 46.232621] systemd[1]: Starting Set the console keyboard layout... [ 46.232816] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 46.578060] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 46.879118] systemd-journald[443]: Received request to flush runtime journal from PID 1 [ 47.028369] lp: driver loaded but no devices found [ 47.195021] ppdev: user-space parallel port driver [ 47.219433] parport_pc 00:02: reported by Plug and Play ACPI [ 47.219504] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 47.320132] lp0: using parport0 (interrupt-driven). [ 57.191427] audit: type=1400 audit(1573962427.423:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=559 comm="apparmor_parser" [ 57.215223] audit: type=1400 audit(1573962427.447:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=556 comm="apparmor_parser" [ 57.414486] audit: type=1400 audit(1573962427.647:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=553 comm="apparmor_parser" [ 57.481208] audit: type=1400 audit(1573962427.715:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=552 comm="apparmor_parser" [ 57.504737] audit: type=1400 audit(1573962427.739:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=554 comm="apparmor_parser" [ 57.504741] audit: type=1400 audit(1573962427.739:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=554 comm="apparmor_parser" [ 57.508105] audit: type=1400 audit(1573962427.743:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=558 comm="apparmor_parser" [ 57.508109] audit: type=1400 audit(1573962427.743:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=558 comm="apparmor_parser" [ 57.508112] audit: type=1400 audit(1573962427.743:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=558 comm="apparmor_parser" [ 57.581884] audit: type=1400 audit(1573962427.815:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=576 comm="apparmor_parser" [ 86.009788] ATK0110 ATK0110:00: EC enabled [ 86.947114] cryptd: max_cpu_qlen set to 1000 [ 87.658829] AVX version of gcm_enc/dec engaged. [ 87.658830] AES CTR mode by8 optimization enabled [ 88.783028] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 88.785103] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 90.508103] IPMI message handler: version 39.2 [ 90.674546] ipmi device interface [ 90.826392] kvm: disabled by bios [ 90.874180] kvm: disabled by bios [ 90.875175] ath: phy0: Mac Chip Rev 0xfffc0.f is not supported by this driver [ 90.875179] ath: phy0: Unable to initialize hardware; initialization status: -95 [ 90.875182] ath9k 0000:04:05.0: Failed to initialize device [ 90.875338] ath9k: probe of 0000:04:05.0 failed with error -95 [ 90.908759] kvm: disabled by bios [ 90.960795] kvm: disabled by bios [ 91.028917] kvm: disabled by bios [ 91.084821] kvm: disabled by bios [ 91.124856] kvm: disabled by bios [ 91.168867] kvm: disabled by bios [ 91.268166] snd_hda_intel 0000:01:00.1: Disabling MSI [ 91.268173] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 91.726106] MCE: In-kernel MCE decoding enabled. [ 92.202999] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.203001] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.256192] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.256193] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.300386] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.300388] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.352254] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.352256] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.396153] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.396154] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.436123] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.436124] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.476146] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.476148] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.480840] nvidia: loading out-of-tree module taints kernel. [ 92.480849] nvidia: module license 'NVIDIA' taints kernel. [ 92.480849] Disabling lock debugging due to kernel taint [ 92.495647] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 92.500717] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 92.500719] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 92.500721] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 92.500722] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 92.500723] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 92.500724] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 92.500725] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 92.500727] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 92.500728] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 92.504735] nvidia-nvlink: Nvlink Core is being initialized, major device number 240 [ 92.505783] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 92.605256] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.31 Sun Oct 27 02:19:35 UTC 2019 [ 92.624951] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 92.625038] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 [ 92.625238] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.625241] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 92.625260] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 92.625329] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 92.625530] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 92.625618] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 92.625693] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 92.625800] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 92.625860] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 92.625936] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 92.816267] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.31 Sun Oct 27 02:09:30 UTC 2019 [ 92.822400] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 92.822402] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 152.873724] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 153.084918] r8169 0000:03:00.0 enp3s0: Link is Down [ 155.684627] bpfilter: Loaded bpfilter_umh pid 1793 [ 162.173687] kauditd_printk_skb: 83 callbacks suppressed [ 162.173688] audit: type=1400 audit(1573962532.407:95): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=1861 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create" [ 162.278347] audit: type=1400 audit(1573962532.511:96): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=1852 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 162.385507] audit: type=1400 audit(1573962532.619:97): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=1861 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 162.854787] audit: type=1400 audit(1573962533.087:98): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=2005 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 162.857402] audit: type=1400 audit(1573962533.091:99): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=2006 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create" [ 162.857696] audit: type=1400 audit(1573962533.091:100): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=2006 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 163.104192] audit: type=1400 audit(1573962533.339:101): apparmor="DENIED" operation="create" profile="snap.bluez.bluez" pid=2070 comm="bluetoothd" family="bluetooth" sock_type="raw" protocol=1 requested_mask="create" denied_mask="create" [ 163.104461] audit: type=1400 audit(1573962533.339:102): apparmor="DENIED" operation="connect" profile="snap.bluez.bluez" name="/run/dbus/system_bus_socket" pid=2070 comm="bluetoothd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 163.111962] audit: type=1400 audit(1573962533.347:103): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=2071 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 163.366618] audit: type=1400 audit(1573962533.599:104): apparmor="DENIED" operation="connect" profile="snap.bluez.obex" name="/run/dbus/system_bus_socket" pid=2124 comm="obexd" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0 [ 166.583068] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 166.583326] caller os_map_kernel_space.part.0+0x73/0x80 [nvidia] mapping multiple BARs [ 167.370358] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 180.461906] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 190.045823] rfkill: input handler disabled [ 791.585249] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device CNDLCD.COM (VGA-0) [ 832.647823] usb 3-3: new high-speed USB device number 2 using ehci-pci [ 832.805045] usb 3-3: New USB device found, idVendor=22d9, idProduct=2046, bcdDevice= 2.23 [ 832.805050] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 832.805054] usb 3-3: Product: CPH1859 [ 832.805056] usb 3-3: Manufacturer: OPPO [ 832.805059] usb 3-3: SerialNumber: S4C6LBZ9V8V4YLEA [ 832.843889] mc: Linux media interface: v0.10 [ 832.925975] usbcore: registered new interface driver snd-usb-audio [ 847.925506] usb 3-3: USB disconnect, device number 2 [ 848.315763] usb 3-3: new high-speed USB device number 3 using ehci-pci [ 848.472983] usb 3-3: New USB device found, idVendor=22d9, idProduct=276a, bcdDevice= 2.23 [ 848.472989] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 848.472992] usb 3-3: Product: CPH1859 [ 848.472995] usb 3-3: Manufacturer: OPPO [ 848.472997] usb 3-3: SerialNumber: S4C6LBZ9V8V4YLEA [ 848.541460] usbcore: registered new interface driver cdc_ether [ 848.548784] rndis_host 3-3:1.0 usb0: register 'rndis_host' at usb-0000:00:16.2-3, RNDIS device, 9a:b0:09:ce:d6:2b [ 848.548907] usbcore: registered new interface driver rndis_host [ 848.561333] rndis_host 3-3:1.0 enp0s22f2u3: renamed from usb0