[ 0.000000] Linux version 4.15.0-1050-oem (buildd@lgw01-amd64-038) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #57-Ubuntu SMP Wed Aug 7 10:34:10 UTC 2019 (Ubuntu 4.15.0-1050.57-oem 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1050-oem root=UUID=ca93bfbd-335a-4cc7-9d0f-f0da18447497 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000008332bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008332c000-0x000000008332cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008332d000-0x000000008332dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008332e000-0x0000000089a0efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000089a0f000-0x0000000089e8efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000089e8f000-0x000000008a36dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008a36e000-0x000000008a41efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008a41f000-0x000000008af1efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008af1f000-0x000000008affefff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x8a380000 ACPI=0x8a380000 SMBIOS=0x8ad18000 MEMATTR=0x86758018 ESRT=0x86771898 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7B16/B360 GAMING PRO CARBON (MS-7B16), BIOS 2.80 08/13/2019 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x46e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 008B800000 mask 7FFF800000 uncachable [ 0.000000] 5 base 6000000000 mask 6000000000 uncachable [ 0.000000] 6 base 4000000000 mask 6000000000 write-combining [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x8b000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x0000000086771898 to 0x00000000867718d0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x370f40000, 0x370f40fff] PGTABLE [ 0.000000] BRK [0x370f41000, 0x370f41fff] PGTABLE [ 0.000000] BRK [0x370f42000, 0x370f42fff] PGTABLE [ 0.000000] BRK [0x370f43000, 0x370f43fff] PGTABLE [ 0.000000] BRK [0x370f44000, 0x370f44fff] PGTABLE [ 0.000000] BRK [0x370f45000, 0x370f45fff] PGTABLE [ 0.000000] BRK [0x370f46000, 0x370f46fff] PGTABLE [ 0.000000] BRK [0x370f47000, 0x370f47fff] PGTABLE [ 0.000000] BRK [0x370f48000, 0x370f48fff] PGTABLE [ 0.000000] BRK [0x370f49000, 0x370f49fff] PGTABLE [ 0.000000] BRK [0x370f4a000, 0x370f4afff] PGTABLE [ 0.000000] BRK [0x370f4b000, 0x370f4bfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32b99000-0x355c3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000008A380000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000008A380098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000008A3BDAA0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000008A3801E8 03D8B5 (v02 ALASKA A M I 01072009 INTL 20160527) [ 0.000000] ACPI: FACS 0x000000008A41E080 000040 [ 0.000000] ACPI: APIC 0x000000008A3BDBB8 0000A0 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000008A3BDC58 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000008A3BDCA0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000008A3BDD40 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000008A3BDD80 001B5F (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x000000008A3BF8E0 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.000000] ACPI: HPET 0x000000008A3C2AA8 000038 (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: SSDT 0x000000008A3C2AE0 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x000000008A3C3A90 002FD1 (v02 INTEL xh_cfsd4 00000000 INTL 20160527) [ 0.000000] ACPI: UEFI 0x000000008A3C6A68 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: LPIT 0x000000008A3C6AB0 000094 (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: SSDT 0x000000008A3C6B48 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x000000008A3C9328 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527) [ 0.000000] ACPI: DBGP 0x000000008A3CA810 000034 (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: DBG2 0x000000008A3CA848 000054 (v00 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: SSDT 0x000000008A3CA8A0 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.000000] ACPI: WSMT 0x000000008A3CA9E8 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x46dfd5000-0x46dffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000046dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040400000-0x000000008332bfff] [ 0.000000] node 0: [mem 0x000000008332e000-0x0000000089a0efff] [ 0.000000] node 0: [mem 0x0000000089e8f000-0x000000008a36dfff] [ 0.000000] node 0: [mem 0x000000008afff000-0x000000008affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000046dffffff] [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046dffffff] [ 0.000000] On node 0 totalpages: 4160139 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8748 pages used for memmap [ 0.000000] DMA32 zone: 559853 pages, LIFO batch:31 [ 0.000000] Normal zone: 56192 pages used for memmap [ 0.000000] Normal zone: 3596288 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x403fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8332c000-0x8332cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x8332d000-0x8332dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x89a0f000-0x89e8efff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a36e000-0x8a41efff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a41f000-0x8af1efff] [ 0.000000] PM: Registered nosave memory: [mem 0x8af1f000-0x8affefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8b000000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4095112 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1050-oem root=UUID=ca93bfbd-335a-4cc7-9d0f-f0da18447497 ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16190432K/16640556K available (12300K kernel code, 2483K rwdata, 4296K rodata, 2432K init, 2384K bss, 450124K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 39559 entries in 155 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1536, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 3700.000 MHz processor [ 0.028000] tsc: Detected 3696.000 MHz TSC [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] mce: CPU supports 12 MCE banks [ 0.028000] CPU0: Thermal monitoring enabled (TM1) [ 0.028000] process: using mwait in idle threads [ 0.028000] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 [ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.028000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.028000] Spectre V2 : Mitigation: Full generic retpoline [ 0.028000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.028000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.028000] MDS: Mitigation: Clear CPU buffers [ 0.035735] Freeing SMP alternatives memory: 36K [ 0.037369] TSC deadline timer enabled [ 0.037374] smpboot: CPU0: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xc) [ 0.037416] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.037438] ... version: 4 [ 0.037438] ... bit width: 48 [ 0.037438] ... generic registers: 8 [ 0.037439] ... value mask: 0000ffffffffffff [ 0.037439] ... max period: 00007fffffffffff [ 0.037439] ... fixed-purpose events: 3 [ 0.037440] ... event mask: 00000007000000ff [ 0.037466] Hierarchical SRCU implementation. [ 0.038131] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.038140] smp: Bringing up secondary CPUs ... [ 0.038186] x86: Booting SMP configuration: [ 0.038187] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.040195] smp: Brought up 1 node, 6 CPUs [ 0.040195] smpboot: Max logical packages: 1 [ 0.040195] smpboot: Total of 6 processors activated (44352.00 BogoMIPS) [ 0.044037] devtmpfs: initialized [ 0.044037] x86/mm: Memory block size: 128MB [ 0.044760] evm: security.selinux [ 0.044760] evm: security.SMACK64 [ 0.044760] evm: security.SMACK64EXEC [ 0.044761] evm: security.SMACK64TRANSMUTE [ 0.044761] evm: security.SMACK64MMAP [ 0.044761] evm: security.apparmor [ 0.044762] evm: security.ima [ 0.044762] evm: security.capability [ 0.044771] PM: Registering ACPI NVS region [mem 0x8332c000-0x8332cfff] (4096 bytes) [ 0.044771] PM: Registering ACPI NVS region [mem 0x8a36e000-0x8a41efff] (724992 bytes) [ 0.044771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.044771] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.044771] pinctrl core: initialized pinctrl subsystem [ 0.044771] RTC time: 17:20:25, date: 11/07/19 [ 0.044771] NET: Registered protocol family 16 [ 0.044771] audit: initializing netlink subsys (disabled) [ 0.044771] audit: type=2000 audit(1573147225.044:1): state=initialized audit_enabled=0 res=1 [ 0.044771] cpuidle: using governor ladder [ 0.044771] cpuidle: using governor menu [ 0.044771] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.044771] ACPI: bus type PCI registered [ 0.044771] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.044771] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.044771] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.044771] PCI: Using configuration type 1 for base access [ 0.044861] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.044861] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.044861] ACPI: Added _OSI(Module Device) [ 0.044861] ACPI: Added _OSI(Processor Device) [ 0.044861] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.044861] ACPI: Added _OSI(Processor Aggregator Device) [ 0.044861] ACPI: Added _OSI(Linux-Dell-Video) [ 0.044861] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.044861] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.107547] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.116747] ACPI: Dynamic OEM Table Load: [ 0.116751] ACPI: SSDT 0xFFFF94C11B2B9C00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.117092] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.118509] ACPI: Dynamic OEM Table Load: [ 0.118512] ACPI: SSDT 0xFFFF94C11B2C4800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.118959] ACPI: Dynamic OEM Table Load: [ 0.118962] ACPI: SSDT 0xFFFF94C11B25A800 0006EC (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.119497] ACPI: Dynamic OEM Table Load: [ 0.119500] ACPI: SSDT 0xFFFF94C11B2C2C00 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.119856] ACPI: Dynamic OEM Table Load: [ 0.119859] ACPI: SSDT 0xFFFF94C11B258800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.120452] ACPI: Dynamic OEM Table Load: [ 0.120455] ACPI: SSDT 0xFFFF94C11B25B000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.120944] ACPI: Dynamic OEM Table Load: [ 0.120946] ACPI: SSDT 0xFFFF94C11B2C7400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.121452] ACPI: Dynamic OEM Table Load: [ 0.121456] ACPI: SSDT 0xFFFF94C11D13E000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.122409] ACPI: Dynamic OEM Table Load: [ 0.122414] ACPI: SSDT 0xFFFF94C11D011C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.126063] ACPI: Interpreter enabled [ 0.126095] ACPI: (supports S0 S3 S4 S5) [ 0.126095] ACPI: Using IOAPIC for interrupt routing [ 0.126125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.127245] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.138622] ACPI: Power Resource [USBC] (on) [ 0.141480] ACPI: Power Resource [V0PR] (on) [ 0.141843] ACPI: Power Resource [V1PR] (on) [ 0.142200] ACPI: Power Resource [V2PR] (on) [ 0.151576] ACPI: Power Resource [WRST] (on) [ 0.156600] ACPI: Power Resource [FN00] (off) [ 0.156679] ACPI: Power Resource [FN01] (off) [ 0.156754] ACPI: Power Resource [FN02] (off) [ 0.156829] ACPI: Power Resource [FN03] (off) [ 0.156905] ACPI: Power Resource [FN04] (off) [ 0.157507] ACPI: Power Resource [PIN] (off) [ 0.157890] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.157894] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.158071] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER] [ 0.158240] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.158241] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.159085] PCI host bridge to bus 0000:00 [ 0.159087] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.159088] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.159089] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.159089] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.159090] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.159091] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.159092] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.159093] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.159093] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.159094] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.159095] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.159096] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.159097] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.159097] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.159098] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.159099] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.159100] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 0.159101] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.159101] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.159102] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.159108] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 [ 0.159432] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000 [ 0.159440] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit] [ 0.159444] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.159447] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.159457] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.159598] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.159606] pci 0000:00:08.0: reg 0x10: [mem 0x600111a000-0x600111afff 64bit] [ 0.159761] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 [ 0.159780] pci 0000:00:12.0: reg 0x10: [mem 0x6001119000-0x6001119fff 64bit] [ 0.159957] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 0.159974] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit] [ 0.160025] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.160372] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 0.160390] pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001115fff 64bit] [ 0.160399] pci 0000:00:14.2: reg 0x18: [mem 0x6001118000-0x6001118fff 64bit] [ 0.160548] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 0.160569] pci 0000:00:16.0: reg 0x10: [mem 0x6001117000-0x6001117fff 64bit] [ 0.160635] pci 0000:00:16.0: PME# supported from D3hot [ 0.160830] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 [ 0.160845] pci 0000:00:17.0: reg 0x10: [mem 0x90020000-0x90021fff] [ 0.160851] pci 0000:00:17.0: reg 0x14: [mem 0x90023000-0x900230ff] [ 0.160857] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097] [ 0.160862] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083] [ 0.160868] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f] [ 0.160874] pci 0000:00:17.0: reg 0x24: [mem 0x90022000-0x900227ff] [ 0.160907] pci 0000:00:17.0: PME# supported from D3hot [ 0.161078] pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100 [ 0.161361] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 0.161401] pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit] [ 0.161437] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit] [ 0.161512] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.162118] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 0.162136] pci 0000:00:1f.4: reg 0x10: [mem 0x6001116000-0x60011160ff 64bit] [ 0.162162] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.162314] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 0.162329] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.162472] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000 [ 0.162502] pci 0000:00:1f.6: reg 0x10: [mem 0x90000000-0x9001ffff] [ 0.162621] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.163861] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.163935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 [ 0.164010] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.164084] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.164157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.164230] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.164303] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.164376] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.165047] SCSI subsystem initialized [ 0.165054] libata version 3.00 loaded. [ 0.165054] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.165054] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.165054] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.165054] vgaarb: loaded [ 0.165054] ACPI: bus type USB registered [ 0.165054] usbcore: registered new interface driver usbfs [ 0.165054] usbcore: registered new interface driver hub [ 0.165054] usbcore: registered new device driver usb [ 0.165054] EDAC MC: Ver: 3.0.0 [ 0.165054] Registered efivars operations [ 0.183602] PCI: Using ACPI for IRQ routing [ 0.223384] PCI: pci_cache_line_size set to 64 bytes [ 0.223432] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.223433] e820: reserve RAM buffer [mem 0x8332c000-0x83ffffff] [ 0.223434] e820: reserve RAM buffer [mem 0x89a0f000-0x8bffffff] [ 0.223434] e820: reserve RAM buffer [mem 0x8a36e000-0x8bffffff] [ 0.223435] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff] [ 0.223436] e820: reserve RAM buffer [mem 0x46e000000-0x46fffffff] [ 0.223489] NetLabel: Initializing [ 0.223490] NetLabel: domain hash size = 128 [ 0.223490] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.223498] NetLabel: unlabeled traffic allowed by default [ 0.224405] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.224409] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.229044] clocksource: Switched to clocksource hpet [ 0.234531] VFS: Disk quotas dquot_6.6.0 [ 0.234540] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.234597] AppArmor: AppArmor Filesystem Enabled [ 0.234613] pnp: PnP ACPI init [ 0.234688] system 00:00: [mem 0x40000000-0x403fffff] has been reserved [ 0.234692] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.234916] system 00:01: [io 0x0a00-0x0a0f] has been reserved [ 0.234917] system 00:01: [io 0x0a10-0x0a1f] has been reserved [ 0.234918] system 00:01: [io 0x0a20-0x0a2f] has been reserved [ 0.234919] system 00:01: [io 0x0280-0x028f] has been reserved [ 0.234921] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235031] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.235032] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.235034] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235127] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.235129] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.235285] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.235286] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.235287] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.235288] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved [ 0.235289] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.235290] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.235291] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.235292] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.235294] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235481] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.235482] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.235483] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.235484] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.235485] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.235486] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.235487] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.235489] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235745] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.235747] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235976] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 0.235977] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 0.235978] system 00:07: [mem 0xfd6b0000-0xfd6bffff] has been reserved [ 0.235979] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 0.235981] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.236906] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.237712] pnp: PnP ACPI: found 9 devices [ 0.247663] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.247667] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.247668] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.247669] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.247670] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.247671] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.247672] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.247673] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.247673] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.247674] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.247675] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.247676] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.247677] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.247678] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.247678] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.247679] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.247680] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.247681] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window] [ 0.247682] pci_bus 0000:00: resource 21 [mem 0x4000000000-0x7fffffffff window] [ 0.247683] pci_bus 0000:00: resource 22 [mem 0xfc800000-0xfe7fffff window] [ 0.247809] NET: Registered protocol family 2 [ 0.247917] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.248072] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.248168] TCP: Hash tables configured (established 131072 bind 65536) [ 0.248190] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.248215] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.248253] NET: Registered protocol family 1 [ 0.248260] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.248457] PCI: CLS 64 bytes, default 64 [ 0.248477] Unpacking initramfs... [ 0.318655] Freeing initrd memory: 43180K [ 0.318668] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.318669] software IO TLB: mapped [mem 0x7ef63000-0x82f63000] (64MB) [ 0.319041] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns [ 0.319063] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.319329] Scanning for low memory corruption every 60 seconds [ 0.319937] Initialise system trusted keyrings [ 0.319943] Key type blacklist registered [ 0.320112] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.320743] zbud: loaded [ 0.321150] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.321349] fuse init (API version 7.26) [ 0.326599] Key type asymmetric registered [ 0.326600] Asymmetric key parser 'x509' registered [ 0.326620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.326714] io scheduler noop registered [ 0.326714] io scheduler deadline registered [ 0.326730] io scheduler cfq registered (default) [ 0.327047] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.327079] efifb: probing for efifb [ 0.327102] efifb: framebuffer at 0x4000000000, using 3072k, total 3072k [ 0.327103] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.327103] efifb: scrolling: redraw [ 0.327104] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.327187] Console: switching to colour frame buffer device 128x48 [ 0.327196] fb0: EFI VGA frame buffer device [ 0.327201] intel_idle: MWAIT substates: 0x11142120 [ 0.327202] intel_idle: v0.4.1 model 0x9E [ 0.327615] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.327736] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.327750] ACPI: Sleep Button [SLPB] [ 0.327774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.327786] ACPI: Power Button [PWRB] [ 0.327804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.327905] ACPI: Power Button [PWRF] [ 0.393290] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.452309] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.452310] ACPI: Thermal Zone [TZ00] (28 C) [ 0.452520] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.473671] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.494943] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.498427] Linux agpgart interface v0.103 [ 0.500583] loop: module loaded [ 0.500861] libphy: Fixed MDIO Bus: probed [ 0.500861] tun: Universal TUN/TAP device driver, 1.6 [ 0.500962] PPP generic driver version 2.4.2 [ 0.501064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.501065] ehci-pci: EHCI PCI platform driver [ 0.501071] ehci-platform: EHCI generic platform driver [ 0.501077] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.501078] ohci-pci: OHCI PCI platform driver [ 0.501082] ohci-platform: OHCI generic platform driver [ 0.501087] uhci_hcd: USB Universal Host Controller Interface driver [ 0.501207] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.501210] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.502349] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 0.502353] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.502487] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.502488] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.502490] usb usb1: Product: xHCI Host Controller [ 0.502490] usb usb1: Manufacturer: Linux 4.15.0-1050-oem xhci-hcd [ 0.502491] usb usb1: SerialNumber: 0000:00:14.0 [ 0.502633] hub 1-0:1.0: USB hub found [ 0.502648] hub 1-0:1.0: 16 ports detected [ 0.503891] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.503893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.503894] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.503913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.503914] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.503914] usb usb2: Product: xHCI Host Controller [ 0.503915] usb usb2: Manufacturer: Linux 4.15.0-1050-oem xhci-hcd [ 0.503916] usb usb2: SerialNumber: 0000:00:14.0 [ 0.504097] hub 2-0:1.0: USB hub found [ 0.504123] hub 2-0:1.0: 6 ports detected [ 0.504650] i8042: PNP: No PS/2 controller found. [ 0.504849] mousedev: PS/2 mouse device common for all mice [ 0.505258] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.505835] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.505931] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.505935] i2c /dev entries driver [ 0.505972] device-mapper: uevent: version 1.0.3 [ 0.506065] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.506067] intel_pstate: Intel P-state driver initializing [ 0.507621] intel_pstate: HWP enabled [ 0.508177] ledtrig-cpu: registered to indicate activity on CPUs [ 0.508178] EFI Variables Facility v0.08 2004-May-17 [ 0.531361] intel_pmc_core: initialized [ 0.531476] NET: Registered protocol family 10 [ 0.536404] Segment Routing with IPv6 [ 0.536414] NET: Registered protocol family 17 [ 0.536652] Key type dns_resolver registered [ 0.537631] RAS: Correctable Errors collector initialized. [ 0.537705] microcode: sig=0x906ec, pf=0x2, revision=0xbe [ 0.538022] microcode: Microcode Update Driver: v2.2. [ 0.538026] sched_clock: Marking stable (538003471, 0)->(513345237, 24658234) [ 0.538718] registered taskstats version 1 [ 0.538722] Loading compiled-in X.509 certificates [ 0.541143] Loaded X.509 cert 'Build time autogenerated kernel key: 70904ea6a787a72b5f5d020fa36497deed22ec07' [ 0.541838] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 0.541849] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 0.541855] Loaded UEFI:db cert 'MSI SHIP OWN CA: c2608d7de57ee78642366ec645b7381c' linked to secondary sys keyring [ 0.542053] Couldn't get size: 0x800000000000000e [ 0.542054] MODSIGN: Couldn't get UEFI MokListRT [ 0.542650] zswap: loaded using pool lzo/zbud [ 0.547119] Key type big_key registered [ 0.547121] Key type trusted registered [ 0.549123] Key type encrypted registered [ 0.549125] AppArmor: AppArmor sha1 policy hashing enabled [ 0.549127] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.549129] ima: Allocated hash algorithm: sha1 [ 0.549137] evm: HMAC attrs: 0x1 [ 0.550062] Magic number: 11:630:339 [ 0.550066] usb usb1-port10: hash matches [ 0.550332] rtc_cmos rtc_cmos: setting system clock to 2019-11-07 17:20:25 UTC (1573147225) [ 0.550515] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.550516] EDD information not available. [ 0.805876] Freeing unused kernel image memory: 2432K [ 0.832258] Write protecting the kernel read-only data: 20480k [ 0.833292] Freeing unused kernel image memory: 2008K [ 0.833476] Freeing unused kernel image memory: 1848K [ 0.837144] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.840309] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd [ 0.862808] usb 2-4: New USB device found, idVendor=05e3, idProduct=0732 [ 0.862809] usb 2-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 0.862810] usb 2-4: Product: USB Reader [ 0.862811] usb 2-4: Manufacturer: Genesys [ 0.862812] usb 2-4: SerialNumber: 000000000688 [ 0.913172] pps_core: LinuxPPS API ver. 1 registered [ 0.913173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.913669] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.914097] PTP clock support registered [ 0.915593] ahci 0000:00:17.0: version 3.0 [ 0.916749] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.916750] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.926059] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.926060] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst [ 0.988154] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.988820] scsi host0: ahci [ 0.989158] scsi host1: ahci [ 0.989387] scsi host2: ahci [ 0.989582] scsi host3: ahci [ 0.990551] scsi host4: ahci [ 0.990844] scsi host5: ahci [ 0.990876] ata1: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022100 irq 121 [ 0.990887] ata2: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022180 irq 121 [ 0.990888] ata3: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022200 irq 121 [ 0.990899] ata4: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022280 irq 121 [ 0.990910] ata5: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022300 irq 121 [ 0.990921] ata6: SATA max UDMA/133 abar m2048@0x90022000 port 0x90022380 irq 121 [ 0.991015] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 0.991442] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.162813] usb 1-1: New USB device found, idVendor=174c, idProduct=2074 [ 1.162814] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 1.162814] usb 1-1: Product: ASM107x [ 1.162815] usb 1-1: Manufacturer: Asmedia [ 1.163760] hub 1-1:1.0: USB hub found [ 1.163985] hub 1-1:1.0: 4 ports detected [ 1.238651] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.288341] usb 2-5: new SuperSpeed USB device number 3 using xhci_hcd [ 1.305100] ata1: SATA link down (SStatus 0 SControl 300) [ 1.305121] ata3: SATA link down (SStatus 0 SControl 300) [ 1.305237] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.305282] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.305320] ata2: SATA link down (SStatus 0 SControl 300) [ 1.305335] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.305786] ata5.00: ATA-9: SanDisk SDSSDP064G, 3.1.0, max UDMA/133 [ 1.305786] ata5.00: 123091920 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.306581] ata6.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133 [ 1.306582] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.307360] ata5.00: configured for UDMA/133 [ 1.308165] ata6.00: configured for UDMA/133 [ 1.308677] ata4.00: ATAPI: PIONEER BD-RW BDR-209M, 1.20, max UDMA/100 [ 1.309104] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 00:d8:61:2b:b6:5b [ 1.309105] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.309352] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 1.310052] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 1.310632] usb 2-5: New USB device found, idVendor=174c, idProduct=3074 [ 1.310633] usb 2-5: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 1.310633] usb 2-5: Product: ASM107x [ 1.310634] usb 2-5: Manufacturer: Asmedia [ 1.312393] ata4.00: configured for UDMA/100 [ 1.312660] hub 2-5:1.0: USB hub found [ 1.312845] hub 2-5:1.0: 4 ports detected [ 1.316644] usb-storage 2-4:1.0: USB Mass Storage device detected [ 1.317127] scsi host6: usb-storage 2-4:1.0 [ 1.317166] usbcore: registered new interface driver usb-storage [ 1.318277] usbcore: registered new interface driver uas [ 1.322569] scsi 3:0:0:0: CD-ROM PIONEER BD-RW BDR-209M 1.20 PQ: 0 ANSI: 5 [ 1.340403] clocksource: Switched to clocksource tsc [ 1.416902] sr 3:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.416902] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.417013] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.417101] sr 3:0:0:0: Attached scsi generic sg0 type 5 [ 1.417337] scsi 4:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 [ 1.417577] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.417813] sd 4:0:0:0: [sda] 123091920 512-byte logical blocks: (63.0 GB/58.7 GiB) [ 1.417823] sd 4:0:0:0: [sda] Write Protect is off [ 1.417824] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.417836] scsi 5:0:0:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 5 [ 1.417907] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.418064] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.418077] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.418078] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 1.418084] sd 5:0:0:0: [sdb] Write Protect is off [ 1.418085] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.418095] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.420432] sda: sda1 sda2 sda3 [ 1.420972] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.436116] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 1.466579] sdb: sdb1 sdb2 [ 1.467143] sd 5:0:0:0: [sdb] Attached SCSI disk [ 1.522718] random: fast init done [ 1.586066] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.586067] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.586068] usb 1-2: Product: USB2.0 Hub [ 1.587273] hub 1-2:1.0: USB hub found [ 1.587690] hub 1-2:1.0: 4 ports detected [ 1.716117] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 1.864973] usb 1-7: New USB device found, idVendor=1462, idProduct=7b16 [ 1.864974] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.864975] usb 1-7: Product: PRO CARBON 10 [ 1.864976] usb 1-7: Manufacturer: MSI [ 1.864976] usb 1-7: SerialNumber: A02018011117 [ 1.868473] hidraw: raw HID events driver (C) Jiri Kosina [ 1.869708] usbcore: registered new interface driver usbhid [ 1.869708] usbhid: USB HID core driver [ 1.870894] input: MSI PRO CARBON 10 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1462:7B16.0001/input/input3 [ 1.870940] hid-generic 0003:1462:7B16.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [MSI PRO CARBON 10] on usb-0000:00:14.0-7/input0 [ 1.944055] usb 1-2.1: new high-speed USB device number 5 using xhci_hcd [ 2.044211] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2514 [ 2.044212] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.045014] hub 1-2.1:1.0: USB hub found [ 2.045084] hub 1-2.1:1.0: 4 ports detected [ 2.124115] usb 1-2.2: new full-speed USB device number 6 using xhci_hcd [ 2.225342] usb 1-2.2: New USB device found, idVendor=413c, idProduct=1003 [ 2.225343] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.225344] usb 1-2.2: Product: Dell USB Keyboard Hub [ 2.225344] usb 1-2.2: Manufacturer: Dell [ 2.229237] hub 1-2.2:1.0: USB hub found [ 2.229466] hub 1-2.2:1.0: 3 ports detected [ 2.307758] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.332085] usb 1-2.1.2: new full-speed USB device number 7 using xhci_hcd [ 2.332960] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0578 PQ: 0 ANSI: 6 [ 2.333348] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 0578 PQ: 0 ANSI: 6 [ 2.333734] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 0578 PQ: 0 ANSI: 6 [ 2.334120] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 0578 PQ: 0 ANSI: 6 [ 2.334502] scsi 6:0:0:4: Direct-Access Generic STORAGE DEVICE 0578 PQ: 0 ANSI: 6 [ 2.334660] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 2.334861] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 2.335039] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 2.335233] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 2.335284] sd 6:0:0:4: Attached scsi generic sg7 type 0 [ 2.338229] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 2.339408] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 2.339817] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 2.340204] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 2.340669] sd 6:0:0:4: [sdg] Attached SCSI removable disk [ 2.648015] usb 1-2.2.1: new full-speed USB device number 8 using xhci_hcd [ 2.660540] systemd[1]: Inserted module 'autofs4' [ 2.670131] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.680349] usb 1-2.1.2: New USB device found, idVendor=413c, idProduct=a503 [ 2.680350] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.680350] usb 1-2.1.2: Product: Dell AC511 USB SoundBar [ 2.680351] usb 1-2.1.2: Manufacturer: Dell [ 2.693773] input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.3/0003:413C:A503.0002/input/input4 [ 2.721022] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.740189] systemd[1]: Detected architecture x86-64. [ 2.742018] systemd[1]: Set hostname to . [ 2.749025] usb 1-2.2.1: New USB device found, idVendor=413c, idProduct=2010 [ 2.749026] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.749027] usb 1-2.2.1: Product: Dell USB Keyboard Hub [ 2.749028] usb 1-2.2.1: Manufacturer: Dell [ 2.755074] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:413C:2010.0003/input/input5 [ 2.756110] hid-generic 0003:413C:A503.0002: input,hidraw1: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-2.1.2/input3 [ 2.816220] hid-generic 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-2.2.1/input0 [ 2.817289] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:413C:2010.0004/input/input6 [ 2.876189] hid-generic 0003:413C:2010.0004: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-2.2.1/input1 [ 3.049805] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 3.089090] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 3.099846] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. [ 3.100016] usb 1-2.2.3: new full-speed USB device number 9 using xhci_hcd [ 3.107900] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. [ 3.152204] systemd[1]: Reached target User and Group Name Lookups. [ 3.152305] systemd[1]: Listening on Journal Audit Socket. [ 3.152332] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.177857] EXT4-fs (sda3): re-mounted. Opts: discard,errors=remount-ro [ 3.194682] random: systemd-random-: uninitialized urandom read (512 bytes read) [ 3.197215] lp: driver loaded but no devices found [ 3.198225] RPC: Registered named UNIX socket transport module. [ 3.198225] RPC: Registered udp transport module. [ 3.198226] RPC: Registered tcp transport module. [ 3.198226] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.200120] ppdev: user-space parallel port driver [ 3.206096] usb 1-2.2.3: New USB device found, idVendor=062a, idProduct=4182 [ 3.206097] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.206097] usb 1-2.2.3: Product: 2.4G Keyboard Mouse [ 3.206098] usb 1-2.2.3: Manufacturer: MOSART Semi. [ 3.213125] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/0003:062A:4182.0005/input/input7 [ 3.276065] hid-generic 0003:062A:4182.0005: input,hidraw4: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2.2.3/input0 [ 3.277912] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.1/0003:062A:4182.0006/input/input8 [ 3.336110] hid-generic 0003:062A:4182.0006: input,hiddev1,hidraw5: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2.2.3/input1 [ 3.338678] systemd-journald[302]: Received request to flush runtime journal from PID 1 [ 3.389501] random: crng init done [ 3.672561] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.672561] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.672562] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.672562] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.672562] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.672563] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.677097] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 3.677129] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 3.707688] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002) [ 3.707831] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.718536] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.725688] AVX2 version of gcm_enc/dec engaged. [ 3.725689] AES CTR mode by8 optimization enabled [ 3.859512] [drm] Memory usable by graphics device = 4096M [ 3.859514] checking generic (4000000000 300000) vs hw (4000000000 10000000) [ 3.859515] fb: switching to inteldrmfb from EFI VGA [ 3.859591] Console: switching to colour dummy device 80x25 [ 3.859634] [drm] Replacing VGA console driver [ 3.865528] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.865528] [drm] Driver supports precise vblank timestamp query. [ 3.865561] [drm:intel_bios_init [i915]] *ERROR* Unexpected child device config size 39 (expected 38 for VBT version 228) [ 3.867652] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.876432] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 3.877778] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.878173] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 3.878743] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [ 3.886721] intel_rapl: Found RAPL domain package [ 3.886722] intel_rapl: Found RAPL domain core [ 3.886722] intel_rapl: Found RAPL domain uncore [ 3.886723] intel_rapl: Found RAPL domain dram [ 3.890199] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.929884] usbcore: registered new interface driver snd-usb-audio [ 3.957199] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.957596] fbcon: inteldrmfb (fb0) is primary device [ 3.957641] Console: switching to colour frame buffer device 240x67 [ 3.957655] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.993046] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 3.993047] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.993048] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.993049] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.993050] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 3.993050] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.993051] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 3.993052] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 3.993053] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.019451] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 4.019479] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 4.019507] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 4.019532] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 4.019554] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.019575] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.019597] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 4.019618] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.019638] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.019659] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.019680] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 4.019700] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 4.895749] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 4.947404] audit: type=1400 audit(1573147229.890:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1327 comm="apparmor_parser" [ 4.947406] audit: type=1400 audit(1573147229.890:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1327 comm="apparmor_parser" [ 4.947559] audit: type=1400 audit(1573147229.890:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1333 comm="apparmor_parser" [ 4.947772] audit: type=1400 audit(1573147229.890:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1334 comm="apparmor_parser" [ 4.953418] audit: type=1400 audit(1573147229.898:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1338 comm="apparmor_parser" [ 4.953419] audit: type=1400 audit(1573147229.898:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1338 comm="apparmor_parser" [ 4.956468] audit: type=1400 audit(1573147229.902:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1339 comm="apparmor_parser" [ 4.956769] audit: type=1400 audit(1573147229.902:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1341 comm="apparmor_parser" [ 4.957434] audit: type=1400 audit(1573147229.902:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1326 comm="apparmor_parser" [ 5.326696] Process accounting resumed [ 5.788331] [drm] RC6 on [ 5.846338] kauditd_printk_skb: 23 callbacks suppressed [ 5.846338] audit: type=1107 audit(1573147230.790:34): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=1366 label="/usr/bin/freshclam" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [ 6.397415] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 6.588217] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 6.759597] audit: type=1107 audit(1573147231.702:35): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=1520 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [ 10.622931] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.623037] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 17.283336] audit: type=1400 audit(1573147242.226:36): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2452 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 17.283889] audit: type=1400 audit(1573147242.226:37): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/mysql.cnf" pid=2452 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 17.462667] audit: type=1400 audit(1573147242.406:38): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2510 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 18.408298] audit: type=1400 audit(1573147243.354:39): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/ssl/openssl.cnf" pid=2510 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 4938.529866] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 6568.081257] perf: interrupt took too long (3137 > 3136), lowering kernel.perf_event_max_sample_rate to 63750 [10442.009706] PM: suspend entry (deep) [10442.009708] PM: Syncing filesystems ... done. [10442.207843] Freezing user space processes ... (elapsed 0.002 seconds) done. [10442.209874] OOM killer disabled. [10442.209875] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10442.211261] Suspending console(s) (use no_console_suspend to debug) [10442.213278] e1000e: EEE TX LPI TIMER: 00000011 [10442.247689] sd 4:0:0:0: [sda] Synchronizing SCSI cache [10442.247705] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [10442.247807] sd 4:0:0:0: [sda] Stopping disk [10442.275296] sd 5:0:0:0: [sdb] Stopping disk [10442.894445] ACPI: Preparing to enter system sleep state S3 [10442.898025] PM: Saving platform NVS memory [10442.898039] Disabling non-boot CPUs ... [10442.912295] IRQ 121: no longer affine to CPU1 [10442.913310] smpboot: CPU 1 is now offline [10442.937282] smpboot: CPU 2 is now offline [10442.964232] IRQ 124: no longer affine to CPU3 [10442.965246] smpboot: CPU 3 is now offline [10442.992214] IRQ 120: no longer affine to CPU4 [10442.993234] smpboot: CPU 4 is now offline [10443.021183] smpboot: CPU 5 is now offline [10443.028508] ACPI: Low-level resume complete [10443.028668] PM: Restoring platform NVS memory [10443.029859] Enabling non-boot CPUs ... [10443.030008] x86: Booting SMP configuration: [10443.030010] smpboot: Booting Node 0 Processor 1 APIC 0x2 [10443.031421] cache: parent cpu1 should not be sleeping [10443.031875] CPU1 is up [10443.031928] smpboot: Booting Node 0 Processor 2 APIC 0x4 [10443.033378] cache: parent cpu2 should not be sleeping [10443.033860] CPU2 is up [10443.033907] smpboot: Booting Node 0 Processor 3 APIC 0x6 [10443.035349] cache: parent cpu3 should not be sleeping [10443.035862] CPU3 is up [10443.035909] smpboot: Booting Node 0 Processor 4 APIC 0x8 [10443.037462] cache: parent cpu4 should not be sleeping [10443.038007] CPU4 is up [10443.038052] smpboot: Booting Node 0 Processor 5 APIC 0xa [10443.039606] cache: parent cpu5 should not be sleeping [10443.040190] CPU5 is up [10443.054655] ACPI: Waking up from system sleep state S3 [10443.143489] sd 4:0:0:0: [sda] Starting disk [10443.143492] sd 5:0:0:0: [sdb] Starting disk [10443.516317] ata2: SATA link down (SStatus 0 SControl 300) [10443.516373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10443.516405] ata1: SATA link down (SStatus 0 SControl 300) [10443.516454] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [10443.516481] ata3: SATA link down (SStatus 0 SControl 300) [10443.520138] ata5.00: configured for UDMA/133 [10443.523528] ata4.00: configured for UDMA/100 [10443.574686] acpi LNXPOWER:04: Turning OFF [10443.574783] OOM killer enabled. [10443.574784] Restarting tasks ... [10443.574995] usb 2-5: USB disconnect, device number 3 [10443.578344] [drm] RC6 on [10443.589911] done. [10443.653057] video LNXVIDEO:00: Restoring backlight state [10443.653060] PM: suspend exit [10443.793199] usb 1-1: USB disconnect, device number 2 [10444.008890] usb 1-2: USB disconnect, device number 3 [10444.008895] usb 1-2.1: USB disconnect, device number 5 [10444.008897] usb 1-2.1.2: USB disconnect, device number 7 [10444.089399] usb 1-2.2: USB disconnect, device number 6 [10444.089406] usb 1-2.2.1: USB disconnect, device number 8 [10444.261448] usb 1-2.2.3: USB disconnect, device number 9 [10444.804845] usb 1-2: new high-speed USB device number 10 using xhci_hcd [10444.958102] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [10444.958104] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [10444.958105] usb 1-2: Product: USB2.0 Hub [10444.958955] hub 1-2:1.0: USB hub found [10444.959262] hub 1-2:1.0: 4 ports detected [10445.248845] usb 1-2.1: new high-speed USB device number 11 using xhci_hcd [10445.348928] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2514 [10445.348930] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [10445.349532] hub 1-2.1:1.0: USB hub found [10445.349587] hub 1-2.1:1.0: 4 ports detected [10445.428860] usb 1-2.2: new full-speed USB device number 12 using xhci_hcd [10445.529728] usb 1-2.2: New USB device found, idVendor=413c, idProduct=1003 [10445.529730] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [10445.529731] usb 1-2.2: Product: Dell USB Keyboard Hub [10445.529731] usb 1-2.2: Manufacturer: Dell [10445.532778] hub 1-2.2:1.0: USB hub found [10445.532908] hub 1-2.2:1.0: 3 ports detected [10445.608833] usb 1-7: USB disconnect, device number 4 [10445.636820] usb 1-2.1.2: new full-speed USB device number 13 using xhci_hcd [10445.952809] usb 1-2.2.1: new full-speed USB device number 14 using xhci_hcd [10445.984877] usb 1-2.1.2: New USB device found, idVendor=413c, idProduct=a503 [10445.984879] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [10445.984880] usb 1-2.1.2: Product: Dell AC511 USB SoundBar [10445.984881] usb 1-2.1.2: Manufacturer: Dell [10446.027698] input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.3/0003:413C:A503.0007/input/input22 [10446.054101] usb 1-2.2.1: New USB device found, idVendor=413c, idProduct=2010 [10446.054102] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [10446.054103] usb 1-2.2.1: Product: Dell USB Keyboard Hub [10446.054104] usb 1-2.2.1: Manufacturer: Dell [10446.060341] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:413C:2010.0008/input/input23 [10446.084982] hid-generic 0003:413C:A503.0007: input,hidraw0: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-2.1.2/input3 [10446.145038] hid-generic 0003:413C:2010.0008: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-2.2.1/input0 [10446.146106] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:413C:2010.0009/input/input24 [10446.180803] usb 1-7: new full-speed USB device number 15 using xhci_hcd [10446.204939] hid-generic 0003:413C:2010.0009: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-2.2.1/input1 [10446.329623] usb 1-7: New USB device found, idVendor=1462, idProduct=7b16 [10446.329624] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10446.329625] usb 1-7: Product: PRO CARBON 10 [10446.329625] usb 1-7: Manufacturer: MSI [10446.329626] usb 1-7: SerialNumber: A02018011117 [10446.331137] input: MSI PRO CARBON 10 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1462:7B16.000A/input/input25 [10446.331287] hid-generic 0003:1462:7B16.000A: input,hiddev0,hidraw3: USB HID v1.10 Device [MSI PRO CARBON 10] on usb-0000:00:14.0-7/input0 [10446.428918] usb 1-2.2.3: new full-speed USB device number 16 using xhci_hcd [10446.535569] usb 1-2.2.3: New USB device found, idVendor=062a, idProduct=4182 [10446.535573] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [10446.535576] usb 1-2.2.3: Product: 2.4G Keyboard Mouse [10446.535579] usb 1-2.2.3: Manufacturer: MOSART Semi. [10446.542774] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/0003:062A:4182.000B/input/input26 [10446.601597] hid-generic 0003:062A:4182.000B: input,hidraw4: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2.2.3/input0 [10446.604841] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.1/0003:062A:4182.000C/input/input27 [10446.665533] hid-generic 0003:062A:4182.000C: input,hiddev1,hidraw5: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2.2.3/input1 [10447.252823] usb 1-1: new high-speed USB device number 17 using xhci_hcd [10447.427157] usb 1-1: New USB device found, idVendor=174c, idProduct=2074 [10447.427163] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [10447.427167] usb 1-1: Product: ASM107x [10447.427171] usb 1-1: Manufacturer: Asmedia [10447.428621] hub 1-1:1.0: USB hub found [10447.428861] hub 1-1:1.0: 4 ports detected [10447.607347] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [10448.524778] ata6: link is slow to respond, please be patient (ready=0) [10453.204574] ata6: COMRESET failed (errno=-16) [10453.519771] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [10453.522799] ata6.00: configured for UDMA/133 [10454.055036] e1000e: eno1 NIC Link is Down [10454.058567] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [10454.248855] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [10459.698927] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [10459.698981] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [25035.293918] PM: suspend entry (deep) [25035.293920] PM: Syncing filesystems ... done. [25035.493551] Freezing user space processes ... (elapsed 0.002 seconds) done. [25035.496009] OOM killer disabled. [25035.496009] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25035.497437] Suspending console(s) (use no_console_suspend to debug) [25035.499488] e1000e: EEE TX LPI TIMER: 00000011 [25035.534277] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [25035.534300] sd 4:0:0:0: [sda] Synchronizing SCSI cache [25035.534394] sd 4:0:0:0: [sda] Stopping disk [25035.561401] sd 5:0:0:0: [sdb] Stopping disk [25036.176332] ACPI: Preparing to enter system sleep state S3 [25036.179954] PM: Saving platform NVS memory [25036.179968] Disabling non-boot CPUs ... [25036.194414] IRQ 121: no longer affine to CPU1 [25036.195429] smpboot: CPU 1 is now offline [25036.219385] smpboot: CPU 2 is now offline [25036.242338] IRQ 124: no longer affine to CPU3 [25036.243352] smpboot: CPU 3 is now offline [25036.266311] IRQ 120: no longer affine to CPU4 [25036.267327] smpboot: CPU 4 is now offline [25036.291275] smpboot: CPU 5 is now offline [25036.298831] ACPI: Low-level resume complete [25036.298987] PM: Restoring platform NVS memory [25036.300203] Enabling non-boot CPUs ... [25036.300316] x86: Booting SMP configuration: [25036.300319] smpboot: Booting Node 0 Processor 1 APIC 0x2 [25036.301718] cache: parent cpu1 should not be sleeping [25036.302164] CPU1 is up [25036.302247] smpboot: Booting Node 0 Processor 2 APIC 0x4 [25036.303763] cache: parent cpu2 should not be sleeping [25036.304263] CPU2 is up [25036.304313] smpboot: Booting Node 0 Processor 3 APIC 0x6 [25036.305713] cache: parent cpu3 should not be sleeping [25036.306215] CPU3 is up [25036.306265] smpboot: Booting Node 0 Processor 4 APIC 0x8 [25036.307813] cache: parent cpu4 should not be sleeping [25036.308373] CPU4 is up [25036.308420] smpboot: Booting Node 0 Processor 5 APIC 0xa [25036.309880] cache: parent cpu5 should not be sleeping [25036.310447] CPU5 is up [25036.324940] ACPI: Waking up from system sleep state S3 [25036.410820] sd 4:0:0:0: [sda] Starting disk [25036.410823] sd 5:0:0:0: [sdb] Starting disk [25036.787185] ata1: SATA link down (SStatus 0 SControl 300) [25036.787216] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [25036.787250] ata3: SATA link down (SStatus 0 SControl 300) [25036.787278] ata2: SATA link down (SStatus 0 SControl 300) [25036.787309] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [25036.790845] ata5.00: configured for UDMA/133 [25036.794477] ata4.00: configured for UDMA/100 [25036.845634] acpi LNXPOWER:04: Turning OFF [25036.845730] OOM killer enabled. [25036.845731] Restarting tasks ... [25036.849370] [drm] RC6 on [25036.858021] done. [25036.916104] video LNXVIDEO:00: Restoring backlight state [25036.916106] PM: suspend exit [25037.068631] usb 1-1: USB disconnect, device number 17 [25037.287970] usb 1-2: USB disconnect, device number 10 [25037.287974] usb 1-2.1: USB disconnect, device number 11 [25037.287977] usb 1-2.1.2: USB disconnect, device number 13 [25037.386851] usb 1-2.2: USB disconnect, device number 12 [25037.386853] usb 1-2.2.1: USB disconnect, device number 14 [25037.621121] usb 1-2.2.3: USB disconnect, device number 16 [25038.115931] usb 1-2: new high-speed USB device number 18 using xhci_hcd [25038.265182] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [25038.265184] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [25038.265185] usb 1-2: Product: USB2.0 Hub [25038.265878] hub 1-2:1.0: USB hub found [25038.266191] hub 1-2:1.0: 4 ports detected [25038.551918] usb 1-2.1: new high-speed USB device number 19 using xhci_hcd [25038.652015] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2514 [25038.652017] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [25038.652558] hub 1-2.1:1.0: USB hub found [25038.652612] hub 1-2.1:1.0: 4 ports detected [25038.731909] usb 1-2.2: new full-speed USB device number 20 using xhci_hcd [25038.832940] usb 1-2.2: New USB device found, idVendor=413c, idProduct=1003 [25038.832942] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [25038.832943] usb 1-2.2: Product: Dell USB Keyboard Hub [25038.832944] usb 1-2.2: Manufacturer: Dell [25038.836396] hub 1-2.2:1.0: USB hub found [25038.836522] hub 1-2.2:1.0: 3 ports detected [25038.915912] usb 1-7: USB disconnect, device number 15 [25038.939918] usb 1-2.1.2: new full-speed USB device number 21 using xhci_hcd [25039.255955] usb 1-2.2.1: new full-speed USB device number 22 using xhci_hcd [25039.288392] usb 1-2.1.2: New USB device found, idVendor=413c, idProduct=a503 [25039.288399] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [25039.288403] usb 1-2.1.2: Product: Dell AC511 USB SoundBar [25039.288407] usb 1-2.1.2: Manufacturer: Dell [25039.336174] input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.3/0003:413C:A503.000D/input/input28 [25039.357242] usb 1-2.2.1: New USB device found, idVendor=413c, idProduct=2010 [25039.357248] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [25039.357252] usb 1-2.2.1: Product: Dell USB Keyboard Hub [25039.357256] usb 1-2.2.1: Manufacturer: Dell [25039.364110] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:413C:2010.000E/input/input29 [25039.396424] hid-generic 0003:413C:A503.000D: input,hidraw0: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-2.1.2/input3 [25039.456771] hid-generic 0003:413C:2010.000E: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-2.2.1/input0 [25039.458753] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:413C:2010.000F/input/input30 [25039.483984] usb 1-7: new full-speed USB device number 23 using xhci_hcd [25039.516430] hid-generic 0003:413C:2010.000F: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:14.0-2.2.1/input1 [25039.633119] usb 1-7: New USB device found, idVendor=1462, idProduct=7b16 [25039.633125] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [25039.633129] usb 1-7: Product: PRO CARBON 10 [25039.633133] usb 1-7: Manufacturer: MSI [25039.633136] usb 1-7: SerialNumber: A02018011117 [25039.635694] input: MSI PRO CARBON 10 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1462:7B16.0010/input/input31 [25039.636370] hid-generic 0003:1462:7B16.0010: input,hiddev0,hidraw3: USB HID v1.10 Device [MSI PRO CARBON 10] on usb-0000:00:14.0-7/input0 [25039.743964] usb 1-2.2.3: new full-speed USB device number 24 using xhci_hcd [25039.846217] usb 1-2.2.3: New USB device found, idVendor=062a, idProduct=4182 [25039.846223] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [25039.846227] usb 1-2.2.3: Product: 2.4G Keyboard Mouse [25039.846231] usb 1-2.2.3: Manufacturer: MOSART Semi. [25039.853107] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/0003:062A:4182.0011/input/input32 [25039.912665] hid-generic 0003:062A:4182.0011: input,hidraw4: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2.2.3/input0 [25039.915848] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.1/0003:062A:4182.0012/input/input33 [25039.976635] hid-generic 0003:062A:4182.0012: input,hiddev1,hidraw5: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-2.2.3/input1 [25040.559909] usb 1-1: new high-speed USB device number 25 using xhci_hcd [25040.734279] usb 1-1: New USB device found, idVendor=174c, idProduct=2074 [25040.734285] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [25040.734289] usb 1-1: Product: ASM107x [25040.734293] usb 1-1: Manufacturer: Asmedia [25040.735632] hub 1-1:1.0: USB hub found [25040.735940] hub 1-1:1.0: 4 ports detected [25041.190493] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [25041.843881] ata6: link is slow to respond, please be patient (ready=0) [25046.475714] ata6: COMRESET failed (errno=-16) [25046.790864] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [25046.793891] ata6.00: configured for UDMA/133 [25047.248063] e1000e: eno1 NIC Link is Down [25047.254033] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [25047.443935] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [25051.494093] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [25051.494150] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [25251.488857] ata3: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen [25251.488859] ata3: irq_stat 0x00400040, connection status changed [25251.488861] ata3: SError: { PHYRdyChg CommWake DevExch } [25251.488864] ata3: hard resetting link [25257.247827] ata3: link is slow to respond, please be patient (ready=0) [25261.523665] ata3: COMRESET failed (errno=-16) [25261.523670] ata3: hard resetting link [25264.043607] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [25264.149881] ata3.00: ATA-9: WDC WD60PURZ-85ZUFY1, 80.00A80, max UDMA/133 [25264.149883] ata3.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [25264.150519] ata3.00: configured for UDMA/133 [25264.150525] ata3: EH complete [25264.150645] scsi 2:0:0:0: Direct-Access ATA WDC WD60PURZ-85Z 0A80 PQ: 0 ANSI: 5 [25264.154671] sd 2:0:0:0: [sdh] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [25264.154673] sd 2:0:0:0: [sdh] 4096-byte physical blocks [25264.154678] sd 2:0:0:0: [sdh] Write Protect is off [25264.154679] sd 2:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [25264.154685] sd 2:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [25264.155078] sd 2:0:0:0: Attached scsi generic sg8 type 0 [25264.164308] sd 2:0:0:0: [sdh] Attached SCSI disk [25295.888043] NILFS version 2 loaded [25304.699860] sdh: [25304.986477] sdh: [25305.029762] sdh: [25306.201045] sdh: [25420.606356] sdh: [25421.141938] sdh: sdh1 [25421.448789] sdh: sdh1 [25421.720036] sdh: sdh1 [25422.216469] sdh: sdh1 sdh2 [25422.560043] sdh: sdh1 sdh2 [25423.016043] sdh: sdh1 sdh2 [25459.464781] sdh: sdh1 sdh2 [32978.901264] SGI XFS with ACLs, security attributes, realtime, no debug enabled [32978.916127] JFS: nTxBlock = 8192, nTxLock = 65536 [32978.951224] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [32978.966455] QNX4 filesystem 0.2.3 registered. [32979.026985] raid6: sse2x1 gen() 14888 MB/s [32979.074976] raid6: sse2x1 xor() 10895 MB/s [32979.122978] raid6: sse2x2 gen() 18968 MB/s [32979.170971] raid6: sse2x2 xor() 12633 MB/s [32979.218970] raid6: sse2x4 gen() 21872 MB/s [32979.266987] raid6: sse2x4 xor() 12920 MB/s [32979.314984] raid6: avx2x1 gen() 30036 MB/s [32979.362966] raid6: avx2x1 xor() 20902 MB/s [32979.410962] raid6: avx2x2 gen() 36440 MB/s [32979.458965] raid6: avx2x2 xor() 22868 MB/s [32979.506962] raid6: avx2x4 gen() 41675 MB/s [32979.554960] raid6: avx2x4 xor() 19973 MB/s [32979.554962] raid6: using algorithm avx2x4 gen() 41675 MB/s [32979.554962] raid6: .... xor() 19973 MB/s, rmw enabled [32979.554963] raid6: using avx2x2 recovery algorithm [32979.556231] xor: automatically using best checksumming function avx [32979.574926] Btrfs loaded, crc32c=crc32c-intel [40171.130055] usb 1-2.1: USB disconnect, device number 19 [40171.130058] usb 1-2.1.2: USB disconnect, device number 21 [84664.663839] usb 1-2.1: new high-speed USB device number 26 using xhci_hcd [84664.765466] usb 1-2.1: New USB device found, idVendor=0424, idProduct=2514 [84664.765472] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [84664.766587] hub 1-2.1:1.0: USB hub found [84664.766619] hub 1-2.1:1.0: 4 ports detected [84665.055827] usb 1-2.1.2: new full-speed USB device number 27 using xhci_hcd [84665.404069] usb 1-2.1.2: New USB device found, idVendor=413c, idProduct=a503 [84665.404075] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [84665.404079] usb 1-2.1.2: Product: Dell AC511 USB SoundBar [84665.404083] usb 1-2.1.2: Manufacturer: Dell [84665.450103] input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.3/0003:413C:A503.0013/input/input34 [84665.508235] hid-generic 0003:413C:A503.0013: input,hidraw0: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-2.1.2/input3 [84690.225206] sdh: sdh1 sdh2 [84690.736131] sdh: sdh1 sdh2 [84693.157650] EXT4-fs (sdh2): mounted filesystem with ordered data mode. Opts: (null) [97302.079638] audit: type=1107 audit(1573388205.759:40): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=11536 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [97302.594344] audit: type=1107 audit(1573388206.271:41): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=11567 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [97303.099745] audit: type=1107 audit(1573388206.775:42): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=11578 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [97303.628497] audit: type=1107 audit(1573388207.303:43): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=11588 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [97304.095253] audit: type=1107 audit(1573388207.771:44): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=11597 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [100345.915340] audit: type=1107 audit(1573391249.694:45): pid=1411 uid=105 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/systemd1" interface="org.freedesktop.systemd1.Manager" member="GetDynamicUsers" mask="send" name="org.freedesktop.systemd1" pid=12719 label="/usr/sbin/mysqld" peer_pid=1 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=105 hostname=? addr=? terminal=?' [104639.874623] perf: interrupt took too long (3942 > 3921), lowering kernel.perf_event_max_sample_rate to 50500