Thanks for your action on this matter,

I have attached the files at the bug report as requested,
and attache them here also for your convenience.

Kind Regards,

sean



On Jan 23, 2008 4:53 AM, Parthan <email address hidden> wrote:

> Thank you for taking the time to report this bug and helping to make
> Ubuntu better. Please attach your X server configuration file
> (/etc/X11/xorg.conf) and X server log file (/var/log/Xorg.0.log) to the
> bug report as individual uncompressed file attachments using the
> "Attachment:" box below. Addditionally dmesg output will also be
> helpful. Thanks in advance.
>
> ** Changed in: ubuntu
>       Status: New => Incomplete
>
> --
> after restart (reboot) console (ctrl-alt-f1) not available
> https://bugs.launchpad.net/bugs/185152
> You received this bug notification because you are a direct subscriber
> of the bug.
>


[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[    0.000000]  BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffd0000 - 000000003ffe0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262096
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262096
[    0.000000] On node 0 totalpages: 262096
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32465 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F0180 checksum 0
[    0.000000] ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
[    0.000000] ACPI: RSDT 3FFD0000, 0030 (r1 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: FACP 3FFD0058, 0084 (r2 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: DSDT 3FFD0110, 5487 (r1 TOSHIB 2410     20020918 MSFT  100000A)
[    0.000000] ACPI: FACS 000EEE00, 0040
[    0.000000] ACPI: DBGP 3FFD00DC, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: BOOT 3FFD0030, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: PM-Timer IO Port: 0xee08
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
[    0.000000] Built 1 zonelists.  Total pages: 260049
[    0.000000] Kernel command line: root=UUID=0af19cf7-55bf-4aa7-a918-743a3608c8fc ro quiet splash
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffd000 (0180f000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1694.593 MHz processor.
[   17.442159] Console: colour VGA+ 80x25
[   17.443140] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   17.444133] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.504193] Memory: 1027768k/1048384k available (2015k kernel code, 19932k reserved, 916k data, 364k init, 130880k highmem)
[   17.504210] virtual kernel memory layout:
[   17.504212]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   17.504214]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.504216]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   17.504218]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   17.504219]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   17.504221]       .data : 0xc02f7de6 - 0xc03dce84   ( 916 kB)
[   17.504223]       .text : 0xc0100000 - 0xc02f7de6   (2015 kB)
[   17.504228] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.504305] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   17.584303] Calibrating delay using timer specific routine.. 3392.93 BogoMIPS (lpj=6785867)
[   17.584360] Security Framework v1.0.0 initialized
[   17.584380] SELinux:  Disabled at boot.
[   17.584402] Mount-cache hash table entries: 512
[   17.584693] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[   17.584714] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   17.584719] CPU: L2 cache: 512K
[   17.584723] CPU: Hyper-Threading is disabled
[   17.584727] CPU: After all inits, caps: 3febf9ff 00000000 00000000 0000b080 00000000 00000000 00000000
[   17.584749] Compat vDSO mapped to ffffe000.
[   17.584774] Checking 'hlt' instruction... OK.
[   17.600539] SMP alternatives: switching to UP code
[   17.600926] Freeing SMP alternatives: 11k freed
[   17.601446] Early unpacking initramfs... done
[   18.106754] ACPI: Core revision 20070126
[   18.106847] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   18.109626] ACPI: setting ELCR to 0200 (from 0e00)
[   18.110154] CPU0: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04
[   18.110163] SMP motherboard not detected.
[   18.110167] Local APIC not detected. Using dummy APIC emulation.
[   18.110225] Brought up 1 CPUs
[   18.110429] Booting paravirtualized kernel on bare hardware
[   18.110506] Time:  6:44:44  Date: 00/23/108
[   18.110542] NET: Registered protocol family 16
[   18.110685] EISA bus registered
[   18.110702] ACPI: bus type pci registered
[   18.110831] PCI: PCI BIOS revision 2.10 entry at 0xfd4df, last bus=5
[   18.110835] PCI: Using configuration type 1
[   18.110837] Setting up standard PCI resources
[   18.114464] ACPI: EC: Look up EC in DSDT
[   18.120267] ACPI: Interpreter enabled
[   18.120273] ACPI: (supports S0 S3 S4 S5)
[   18.120305] ACPI: Using PIC for interrupt routing
[   18.129973] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   18.129987] PCI: Probing PCI hardware (bus 00)
[   18.130421] PCI quirk: region ee00-ee7f claimed by ICH4 ACPI/GPIO/TCO
[   18.130427] PCI quirk: region eec0-eeff claimed by ICH4 GPIO
[   18.131217] PCI: Transparent bridge - 0000:00:1e.0
[   18.131490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   18.131546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   18.131651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   18.133923] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *11)
[   18.134102] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *11)
[   18.134276] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11)
[   18.134451] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *11)
[   18.134623] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *11)
[   18.134798] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *11)
[   18.134970] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[   18.135143] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *11)
[   18.135495] ACPI: Power Resource [PFAN] (off)
[   18.135516] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.135536] pnp: PnP ACPI init
[   18.135551] ACPI: bus type pnp registered
[   18.144785] pnp: Device 00:0a activated.
[   18.144796]  00:0a: SMCf010 not responding at SIR 0x100, FIR 0x3f8; auto-configuring
[   18.146555] pnp: Device 00:0a disabled.
[   18.149690] pnp: Device 00:0a activated.
[   18.149698]  00:0a: not responding at SIR 0x100, FIR 0x3f8; swapping SIR/FIR and reconfiguring
[   18.150448] pnp: Device 00:0a disabled.
[   18.153930] pnp: Device 00:0a activated.
[   18.153941]  00:0a: responds at SIR 0x3f8, FIR 0x100
[   18.155965] pnp: PnP ACPI: found 12 devices
[   18.155969] ACPI: ACPI bus type pnp unregistered
[   18.155976] PnPBIOS: Disabled by ACPI PNP
[   18.156082] PCI: Using ACPI for IRQ routing
[   18.156087] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   18.163000] NET: Registered protocol family 8
[   18.163004] NET: Registered protocol family 20
[   18.163120] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[   18.163125] pnp: 00:00: iomem range 0xe0000-0xeffff could not be reserved
[   18.163130] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
[   18.163134] pnp: 00:00: iomem range 0x100000-0x3ffcffff could not be reserved
[   18.164040] Time: tsc clocksource has been installed.
[   18.193700] PCI: Bridge: 0000:00:01.0
[   18.193704]   IO window: disabled.
[   18.193710]   MEM window: fd000000-fdffffff
[   18.193716]   PREFETCH window: dbf00000-dfffffff
[   18.193756] PCI: Bus 3, cardbus bridge: 0000:02:0a.0
[   18.193759]   IO window: 0000d000-0000d0ff
[   18.193765]   IO window: 0000d400-0000d4ff
[   18.193772]   PREFETCH window: 50000000-53ffffff
[   18.193778]   MEM window: 60000000-63ffffff
[   18.193784] PCI: Bus 5, cardbus bridge: 0000:02:0b.0
[   18.193787]   IO window: 0000d800-0000d8ff
[   18.193793]   IO window: 0000dc00-0000dcff
[   18.193799]   PREFETCH window: 54000000-57ffffff
[   18.193806]   MEM window: 64000000-67ffffff
[   18.193812] PCI: Bus 9, cardbus bridge: 0000:02:0b.1
[   18.193815]   IO window: 00001c00-00001cff
[   18.193821]   IO window: 00002000-000020ff
[   18.193828]   PREFETCH window: 58000000-5bffffff
[   18.193834]   MEM window: 68000000-6bffffff
[   18.193840] PCI: Bridge: 0000:00:1e.0
[   18.193845]   IO window: d000-dfff
[   18.193852]   MEM window: fce00000-fcefffff
[   18.193859]   PREFETCH window: 50000000-5bffffff
[   18.193882] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   18.193904] PCI: Enabling device 0000:02:0a.0 (0000 -> 0003)
[   18.194230] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[   18.194235] PCI: setting IRQ 11 as level-triggered
[   18.194240] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[   18.194266] PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
[   18.194535] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   18.194540] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   18.194565] PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
[   18.194832] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   18.194836] ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   18.194866] NET: Registered protocol family 2
[   18.232083] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   18.232333] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   18.234787] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   18.235745] TCP: Hash tables configured (established 131072 bind 65536)
[   18.235755] TCP reno registered
[   18.244275] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[   18.717795]  it is
[   19.239537] Freeing initrd memory: 7058k freed
[   19.239757] Simple Boot Flag at 0x7c set to 0x1
[   19.240138] audit: initializing netlink socket (disabled)
[   19.240162] audit(1201070684.664:1): initialized
[   19.240306] highmem bounce pool size: 64 pages
[   19.243705] VFS: Disk quotas dquot_6.5.1
[   19.243802] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   19.243965] io scheduler noop registered
[   19.243969] io scheduler anticipatory registered
[   19.243972] io scheduler deadline registered
[   19.243998] io scheduler cfq registered (default)
[   19.244060] Boot video device is 0000:01:00.0
[   19.244329] isapnp: Scanning for PnP cards...
[   19.597806] isapnp: No Plug & Play device found
[   19.641455] Real Time Clock Driver v1.12ac
[   19.641627] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   19.641741] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.642826] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
[   19.642843] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   19.642854] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[   19.643864] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   19.644212] input: Macintosh mouse button emulation as /class/input/input0
[   19.644364] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   19.650257] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.650268] serio: i8042 AUX port at 0x60,0x64 irq 12
[   19.650591] mice: PS/2 mouse device common for all mice
[   19.650774] EISA: Probing bus 0 at eisa.0
[   19.650785] Cannot allocate resource for EISA slot 1
[   19.650788] Cannot allocate resource for EISA slot 2
[   19.650809] EISA: Detected 0 cards.
[   19.650969] TCP cubic registered
[   19.650987] NET: Registered protocol family 1
[   19.651025] Using IPI No-Shortcut mode
[   19.651376]   Magic number: 8:16:722
[   19.652430] Freeing unused kernel memory: 364k freed
[   19.691386] input: AT Translated Set 2 keyboard as /class/input/input1
[   21.026137] AppArmor: AppArmor initialized<5>audit(1201070686.164:2):  type=1505 info="AppArmor initialized" pid=1195
[   21.038053] fuse init (API version 7.8)
[   21.046862] Failure registering capabilities with primary security module.
[   21.070313] ACPI: Transitioning device [FAN] to D3
[   21.070319] ACPI: Transitioning device [FAN] to D3
[   21.070325] ACPI: Fan [FAN] (off)
[   21.079464] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   21.081312] ACPI: Thermal Zone [THRM] (25 C)
[   22.074735] usbcore: registered new interface driver usbfs
[   22.074779] usbcore: registered new interface driver hub
[   22.074821] usbcore: registered new device driver usb
[   22.076450] USB Universal Host Controller Interface driver v3.0
[   22.076548] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   22.076567] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   22.076573] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   22.076796] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   22.076830] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0
[   22.077028] usb usb1: configuration #1 chosen from 1 choice
[   22.077072] hub 1-0:1.0: USB hub found
[   22.077086] hub 1-0:1.0: 2 ports detected
[   22.178592] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   22.178600] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   22.178619] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   22.178624] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   22.178663] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   22.178695] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80
[   22.178858] usb usb2: configuration #1 chosen from 1 choice
[   22.178900] hub 2-0:1.0: USB hub found
[   22.178913] hub 2-0:1.0: 2 ports detected
[   22.208124] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[   22.208130] e100: Copyright(c) 1999-2006 Intel Corporation
[   22.303814] SCSI subsystem initialized
[   22.314164] libata version 2.21 loaded.
[   22.320663] ata_piix 0000:00:1f.1: version 2.11
[   22.321031] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   22.321037] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[   22.321099] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   22.321229] scsi0 : ata_piix
[   22.405891] scsi1 : ata_piix
[   22.406161] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001cfa0 irq 14
[   22.406167] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001cfa8 irq 15
[   22.425904] usb 1-1: new low speed USB device using uhci_hcd and address 2
[   22.521109] Floppy drive(s): fd0 is 1.44M
[   22.553161] FDC 0 is a post-1991 82077
[   22.570274] ata1.00: ATA-5: TOSHIBA MK3018GAS, Q3.03 E, max UDMA/100
[   22.570281] ata1.00: 58605120 sectors, multi 16: LBA 
[   22.578190] ata1.00: configured for UDMA/100
[   22.608695] usb 1-1: configuration #1 chosen from 1 choice
[   22.668774] usbcore: registered new interface driver hiddev
[   22.682424] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input2
[   22.682665] input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
[   22.682689] usbcore: registered new interface driver usbhid
[   22.682695] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    5.272000] Marking TSC unstable due to: possible TSC halt in C2.
[    5.276000] Time: acpi_pm clocksource has been installed.
[    5.400000] ata2.00: ATAPI: Optiarc DVD RW AD-7543A, 1-00, max UDMA/33
[    5.572000] ata2.00: configured for UDMA/33
[    5.572000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3018GA Q3.0 PQ: 0 ANSI: 5
[    5.572000] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7543A  1-00 PQ: 0 ANSI: 5
[    5.572000] PCI: Enabling device 0000:02:07.0 (0000 -> 0002)
[    5.572000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[    5.572000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[    5.624000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[fce07000-fce077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.624000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    5.624000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[    5.652000] e100: eth0: e100_probe: addr 0xfceff000, irq 11, MAC addr 00:08:0D:9E:52:12
[    5.684000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[    5.684000] sd 0:0:0:0: [sda] Write Protect is off
[    5.684000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.684000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.684000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[    5.684000] sd 0:0:0:0: [sda] Write Protect is off
[    5.684000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.684000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.684000]  sda: sda1 sda2 < sda5 >
[    5.792000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.800000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.800000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.816000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.816000] Uniform CD-ROM driver Revision: 3.20
[    5.820000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.180000] Attempting manual resume
[    6.180000] swsusp: Resume From Partition 8:5
[    6.180000] PM: Checking swsusp image.
[    6.180000] PM: Resume from disk failed.
[    6.244000] kjournald starting.  Commit interval 5 seconds
[    6.244000] EXT3-fs: mounted filesystem with ordered data mode.
[    6.896000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000390000199da7]
[   18.920000] Linux agpgart interface v0.102 (c) Dave Jones
[   18.936000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.944000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.968000] agpgart: Detected an Intel 845G Chipset.
[   18.984000] agpgart: AGP aperture is 256M @ 0xe0000000
[   19.076000] iTCO_vendor_support: vendor-support=0
[   19.088000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   19.088000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0xee60)
[   19.088000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   19.124000] intel_rng: FWH not detected
[   20.544000] nvidia: module license 'NVIDIA' taints kernel.
[   20.800000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[   20.800000] PCI: setting IRQ 10 as level-triggered
[   20.800000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[   20.800000] NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.01  Wed Sep  5 19:12:23 PDT 2007
[   20.876000] Yenta: CardBus bridge found at 0000:02:0a.0 [12a3:ab01]
[   20.876000] Yenta: Enabling burst memory read transactions
[   20.876000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   20.876000] Yenta: Routing CardBus interrupts to PCI
[   20.876000] Yenta TI: socket 0000:02:0a.0, mfunc 0x01000002, devctl 0x60
[   21.072000] input: PC Speaker as /class/input/input3
[   21.108000] Yenta: ISA IRQ mask 0x0000, PCI irq 11
[   21.108000] Socket status: 30000010
[   21.108000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   21.108000] cs: IO port probe 0xd000-0xdfff: clean.
[   21.108000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[   21.108000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5bffffff
[   21.108000] Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
[   21.236000] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[   21.236000] Socket status: 30000007
[   21.236000] Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
[   21.236000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   21.236000] cs: IO port probe 0xd000-0xdfff: clean.
[   21.236000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[   21.236000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5bffffff
[   21.236000] Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001]
[   21.312000] input: PS/2 Mouse as /class/input/input4
[   21.332000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[   21.340000] pnp: Device 00:0b activated.
[   21.340000] parport_pc 00:0b: reported by Plug and Play ACPI
[   21.344000] pnp: Device 00:0b disabled.
[   21.348000] irda_init()
[   21.348000] NET: Registered protocol family 23
[   21.364000] Yenta: ISA IRQ mask 0x0038, PCI irq 11
[   21.364000] Socket status: 30000020
[   21.364000] Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c
[   21.364000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   21.364000] cs: IO port probe 0xd000-0xdfff: clean.
[   21.364000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[   21.364000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5bffffff
[   21.528000] Detected unconfigured Toshiba laptop with Intel 82801CAM ISA bridge SMSC IrDA chip, pre-configuring device.
[   21.528000] Setting up Intel 82801 controller and SMSC device
[   21.528000] Detected Chip id: 0x5a, setting up registers...
[   21.528000] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[   21.528000] smsc_superio_flat(): fir: 0x130, sir: 0x3f8, dma: 03, irq: 3, mode: 0x0e
[   21.528000] smsc_ircc_present: can't get sir_base of 0x3f8
[   21.744000] pccard: PCMCIA card inserted into slot 0
[   21.936000] cs: memory probe 0xfce00000-0xfcefffff: excluding 0xfce00000-0xfce0ffff 0xfcef0000-0xfcefffff
[   21.944000] pcmcia: registering new device pcmcia0.0
[   22.000000] pccard: CardBus card inserted into slot 2
[   22.056000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
[   22.056000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.056000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   22.252000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   22.352000] orinoco 0.15 (David Gibson <email address hidden>, Pavel Roskin <email address hidden>, et al)
[   22.496000] cs: IO port probe 0x100-0x3af: excluding 0x130-0x137
[   22.496000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.500000] cs: IO port probe 0x820-0x8ff: clean.
[   22.500000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.500000] cs: IO port probe 0xa00-0xaff: clean.
[   22.500000] cs: IO port probe 0x100-0x3af: excluding 0x130-0x137
[   22.504000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.504000] cs: IO port probe 0x820-0x8ff: clean.
[   22.504000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.504000] cs: IO port probe 0xa00-0xaff: clean.
[   22.556000] orinoco_cs 0.15 (David Gibson <email address hidden>, Pavel Roskin <email address hidden>, et al)
[   22.560000] cs: IO port probe 0x100-0x3af: excluding 0x130-0x137
[   22.560000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.560000] cs: IO port probe 0x820-0x8ff: clean.
[   22.560000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.560000] cs: IO port probe 0xa00-0xaff: clean.
[   22.564000] pcmcia: request for exclusive IRQ could not be fulfilled.
[   22.564000] pcmcia: the driver needs updating to supported shared IRQ lines.
[   22.648000] eth1: Hardware identity 0005:0004:0005:0000
[   22.648000] eth1: Station identity  001f:0001:0008:000a
[   22.648000] eth1: Firmware determined as Lucent/Agere 8.10
[   22.648000] eth1: Ad-hoc demo mode supported
[   22.648000] eth1: IEEE standard IBSS ad-hoc mode supported
[   22.648000] eth1: WEP supported, 104-bit key
[   22.648000] eth1: MAC address 00:02:2D:81:93:EB
[   22.648000] eth1: Station name "HERMES I"
[   22.648000] eth1: ready
[   22.648000] eth1: orinoco_cs at 0.0, irq 11, io 0xd100-0xd13f
[   22.660000] intel8x0_measure_ac97_clock: measured 53771 usecs
[   22.660000] intel8x0: clocking to 48000
[   22.660000] PCI: Enabling device 0000:09:00.0 (0000 -> 0002)
[   22.660000] ACPI: PCI Interrupt 0000:09:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.660000] PCI: Setting latency timer of device 0000:09:00.0 to 64
[   22.660000] ohci_hcd 0000:09:00.0: OHCI Host Controller
[   22.660000] ohci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
[   22.660000] ohci_hcd 0000:09:00.0: irq 11, io mem 0x68000000
[   22.744000] usb usb3: configuration #1 chosen from 1 choice
[   22.744000] hub 3-0:1.0: USB hub found
[   22.744000] hub 3-0:1.0: 3 ports detected
[   22.848000] PCI: Enabling device 0000:09:00.1 (0000 -> 0002)
[   22.848000] ACPI: PCI Interrupt 0000:09:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.848000] PCI: Setting latency timer of device 0000:09:00.1 to 64
[   22.848000] ohci_hcd 0000:09:00.1: OHCI Host Controller
[   22.848000] ohci_hcd 0000:09:00.1: new USB bus registered, assigned bus number 4
[   22.848000] ohci_hcd 0000:09:00.1: irq 11, io mem 0x68001000
[   22.932000] usb usb4: configuration #1 chosen from 1 choice
[   22.932000] hub 4-0:1.0: USB hub found
[   22.932000] hub 4-0:1.0: 2 ports detected
[   23.036000] PCI: Enabling device 0000:09:00.2 (0000 -> 0002)
[   23.036000] ACPI: PCI Interrupt 0000:09:00.2[C] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   23.036000] ehci_hcd 0000:09:00.2: EHCI Host Controller
[   23.036000] ehci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 5
[   23.060000] ehci_hcd 0000:09:00.2: irq 11, io mem 0x68002000
[   23.060000] ehci_hcd 0000:09:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   23.060000] usb usb5: configuration #1 chosen from 1 choice
[   23.060000] hub 5-0:1.0: USB hub found
[   23.060000] hub 5-0:1.0: 5 ports detected
[   24.192000] lp: driver loaded but no devices found
[   24.300000] Adding 1253028k swap on /dev/sda5.  Priority:-1 extents:1 across:1253028k
[   24.720000] EXT3 FS on sda1, internal journal
[   26.592000] ACPI: AC Adapter [ADP1] (on-line)
[   26.664000] input: Power Button (FF) as /class/input/input6
[   26.664000] ACPI: Power Button (FF) [PWRF]
[   26.684000] input: Lid Switch as /class/input/input7
[   26.684000] ACPI: Lid Switch [LID]
[   26.788000] ACPI: Battery Slot [BAT1] (battery present)
[   26.840000] No dock devices found.
[   26.888000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[   26.888000] toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
[   26.896000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[   26.896000] toshiba_acpi: ktoshkeyd will check 2 times per second
[   26.900000] toshiba_acpi: Dropped 0 keys from the queue on startup
[   26.924000] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[   29.120000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   29.120000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[   29.744000] eth1: New link status: Disconnected (0002)
[   30.392000] ppdev: user-space parallel port driver
[   30.952000] audit(1201070714.825:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4742 profile="/usr/sbin/cupsd"
[   31.088000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   31.088000] apm: overridden by ACPI.
[   31.552000] NET: Registered protocol family 10
[   31.552000] lo: Disabled Privacy Extensions
[   31.552000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.552000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.176000] Failure registering capabilities with primary security module.
[   35.692000] Clocksource tsc unstable (delta = -69518455 ns)
[   36.388000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[   36.388000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   36.388000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   36.784000] /dev/vmmon[5085]: Module vmmon: registered with major=10 minor=165
[   36.784000] /dev/vmmon[5085]: Module vmmon: initialized
[   37.648000] /dev/vmnet: open called by PID 5112 (vmnet-bridge)
[   37.648000] /dev/vmnet: hub 0 does not exist, allocating memory.
[   37.648000] /dev/vmnet: port on hub 0 successfully opened
[   37.648000] bridge-eth0: enabling the bridge
[   37.648000] bridge-eth0: up
[   37.648000] bridge-eth0: already up
[   37.648000] bridge-eth0: attached
[   37.696000] /dev/vmnet: open called by PID 5126 (vmnet-natd)
[   37.696000] /dev/vmnet: hub 8 does not exist, allocating memory.
[   37.696000] /dev/vmnet: port on hub 8 successfully opened
[   37.700000] /dev/vmnet: open called by PID 5127 (vmnet-netifup)
[   37.700000] /dev/vmnet: hub 1 does not exist, allocating memory.
[   37.700000] /dev/vmnet: port on hub 1 successfully opened
[   37.704000] /dev/vmnet: open called by PID 5128 (vmnet-netifup)
[   37.708000] /dev/vmnet: port on hub 8 successfully opened
[   38.564000] /dev/vmnet: open called by PID 5154 (vmnet-dhcpd)
[   38.564000] /dev/vmnet: port on hub 8 successfully opened
[   38.568000] /dev/vmnet: open called by PID 5155 (vmnet-dhcpd)
[   38.568000] /dev/vmnet: port on hub 1 successfully opened
[   47.844000] vmnet8: no IPv6 routers present
[   48.184000] vmnet1: no IPv6 routers present
[   75.868000] NET: Registered protocol family 17
[   76.172000] eth1: New link status: Connected (0001)
[   76.176000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   93.236000] eth1: no IPv6 routers present

[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[    0.000000]  BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffd0000 - 000000003ffe0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262096
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262096
[    0.000000] On node 0 totalpages: 262096
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32465 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F0180 checksum 0
[    0.000000] ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
[    0.000000] ACPI: RSDT 3FFD0000, 0030 (r1 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: FACP 3FFD0058, 0084 (r2 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: DSDT 3FFD0110, 5487 (r1 TOSHIB 2410     20020918 MSFT  100000A)
[    0.000000] ACPI: FACS 000EEE00, 0040
[    0.000000] ACPI: DBGP 3FFD00DC, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: BOOT 3FFD0030, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
[    0.000000] ACPI: PM-Timer IO Port: 0xee08
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
[    0.000000] Built 1 zonelists.  Total pages: 260049
[    0.000000] Kernel command line: root=UUID=0af19cf7-55bf-4aa7-a918-743a3608c8fc ro quiet splash
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffd000 (0180f000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1694.603 MHz processor.
[  314.562707] Console: colour dummy device 80x25
[  314.563696] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[  314.564666] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[  314.624605] Memory: 1027768k/1048384k available (2015k kernel code, 19932k reserved, 916k data, 364k init, 130880k highmem)
[  314.624623] virtual kernel memory layout:
[  314.624625]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[  314.624626]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[  314.624628]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[  314.624630]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[  314.624631]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[  314.624633]       .data : 0xc02f7de6 - 0xc03dce84   ( 916 kB)
[  314.624635]       .text : 0xc0100000 - 0xc02f7de6   (2015 kB)
[  314.624640] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[  314.624718] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[  314.704717] Calibrating delay using timer specific routine.. 3392.81 BogoMIPS (lpj=6785634)
[  314.704774] Security Framework v1.0.0 initialized
[  314.704793] SELinux:  Disabled at boot.
[  314.704815] Mount-cache hash table entries: 512
[  314.705103] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[  314.705124] CPU: Trace cache: 12K uops, L1 D cache: 8K
[  314.705129] CPU: L2 cache: 512K
[  314.705133] CPU: Hyper-Threading is disabled
[  314.705137] CPU: After all inits, caps: 3febf9ff 00000000 00000000 0000b080 00000000 00000000 00000000
[  314.705158] Compat vDSO mapped to ffffe000.
[  314.705184] Checking 'hlt' instruction... OK.
[  314.720952] SMP alternatives: switching to UP code
[  314.721339] Freeing SMP alternatives: 11k freed
[  314.721858] Early unpacking initramfs... done
[  315.228024] ACPI: Core revision 20070126
[  315.228116] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[  315.230886] ACPI: setting ELCR to 0200 (from 0e00)
[  315.231414] CPU0: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04
[  315.231422] SMP motherboard not detected.
[  315.231426] Local APIC not detected. Using dummy APIC emulation.
[  315.231484] Brought up 1 CPUs
[  315.231687] Booting paravirtualized kernel on bare hardware
[  315.231765] Time:  6:50:53  Date: 00/23/108
[  315.231800] NET: Registered protocol family 16
[  315.231941] EISA bus registered
[  315.231958] ACPI: bus type pci registered
[  315.232086] PCI: PCI BIOS revision 2.10 entry at 0xfd4df, last bus=5
[  315.232090] PCI: Using configuration type 1
[  315.232093] Setting up standard PCI resources
[  315.235722] ACPI: EC: Look up EC in DSDT
[  315.241529] ACPI: Interpreter enabled
[  315.241535] ACPI: (supports S0 S3 S4 S5)
[  315.241567] ACPI: Using PIC for interrupt routing
[  315.251118] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  315.251132] PCI: Probing PCI hardware (bus 00)
[  315.251565] PCI quirk: region ee00-ee7f claimed by ICH4 ACPI/GPIO/TCO
[  315.251571] PCI quirk: region eec0-eeff claimed by ICH4 GPIO
[  315.252360] PCI: Transparent bridge - 0000:00:1e.0
[  315.252655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  315.252710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[  315.252815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[  315.255074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *11)
[  315.255253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *11)
[  315.255427] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11)
[  315.255603] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *11)
[  315.255776] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *11)
[  315.255951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *11)
[  315.256124] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
[  315.256297] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *11)
[  315.256725] ACPI: Power Resource [PFAN] (off)
[  315.256743] Linux Plug and Play Support v0.97 (c) Adam Belay
[  315.256763] pnp: PnP ACPI init
[  315.256779] ACPI: bus type pnp registered
[  315.265990] pnp: Device 00:0a activated.
[  315.266001]  00:0a: SMCf010 not responding at SIR 0x100, FIR 0x3f8; auto-configuring
[  315.267714] pnp: Device 00:0a disabled.
[  315.270829] pnp: Device 00:0a activated.
[  315.270838]  00:0a: not responding at SIR 0x100, FIR 0x3f8; swapping SIR/FIR and reconfiguring
[  315.271626] pnp: Device 00:0a disabled.
[  315.275180] pnp: Device 00:0a activated.
[  315.275191]  00:0a: responds at SIR 0x3f8, FIR 0x100
[  315.277190] pnp: PnP ACPI: found 12 devices
[  315.277194] ACPI: ACPI bus type pnp unregistered
[  315.277200] PnPBIOS: Disabled by ACPI PNP
[  315.277292] PCI: Using ACPI for IRQ routing
[  315.277298] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  315.284214] NET: Registered protocol family 8
[  315.284218] NET: Registered protocol family 20
[  315.284332] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[  315.284338] pnp: 00:00: iomem range 0xe0000-0xeffff could not be reserved
[  315.284342] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
[  315.284347] pnp: 00:00: iomem range 0x100000-0x3ffcffff could not be reserved
[  315.284453] Time: tsc clocksource has been installed.
[  315.314926] PCI: Bridge: 0000:00:01.0
[  315.314930]   IO window: disabled.
[  315.314936]   MEM window: fd000000-fdffffff
[  315.314942]   PREFETCH window: dbf00000-dfffffff
[  315.314983] PCI: Bus 3, cardbus bridge: 0000:02:0a.0
[  315.314986]   IO window: 0000d000-0000d0ff
[  315.314992]   IO window: 0000d400-0000d4ff
[  315.314998]   PREFETCH window: 50000000-53ffffff
[  315.315004]   MEM window: 60000000-63ffffff
[  315.315010] PCI: Bus 5, cardbus bridge: 0000:02:0b.0
[  315.315013]   IO window: 0000d800-0000d8ff
[  315.315019]   IO window: 0000dc00-0000dcff
[  315.315025]   PREFETCH window: 54000000-57ffffff
[  315.315032]   MEM window: 64000000-67ffffff
[  315.315038] PCI: Bus 9, cardbus bridge: 0000:02:0b.1
[  315.315041]   IO window: 00001c00-00001cff
[  315.315047]   IO window: 00002000-000020ff
[  315.315053]   PREFETCH window: 58000000-5bffffff
[  315.315060]   MEM window: 68000000-6bffffff
[  315.315066] PCI: Bridge: 0000:00:1e.0
[  315.315070]   IO window: d000-dfff
[  315.315078]   MEM window: fce00000-fcefffff
[  315.315084]   PREFETCH window: 50000000-5bffffff
[  315.315108] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  315.315129] PCI: Enabling device 0000:02:0a.0 (0000 -> 0003)
[  315.315452] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[  315.315457] PCI: setting IRQ 11 as level-triggered
[  315.315463] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[  315.315488] PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
[  315.315757] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[  315.315762] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[  315.315787] PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
[  315.316053] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[  315.316057] ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[  315.316085] NET: Registered protocol family 2
[  315.352495] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  315.352747] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[  315.355216] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  315.356191] TCP: Hash tables configured (established 131072 bind 65536)
[  315.356201] TCP reno registered
[  315.364690] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[  315.838354]  it is
[  316.359208] Freeing initrd memory: 7058k freed
[  316.359431] Simple Boot Flag at 0x7c set to 0x1
[  316.359749] audit: initializing netlink socket (disabled)
[  316.359774] audit(1201071053.664:1): initialized
[  316.359952] highmem bounce pool size: 64 pages
[  316.363324] VFS: Disk quotas dquot_6.5.1
[  316.363417] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  316.363581] io scheduler noop registered
[  316.363585] io scheduler anticipatory registered
[  316.363588] io scheduler deadline registered
[  316.363614] io scheduler cfq registered (default)
[  316.363676] Boot video device is 0000:01:00.0
[  316.363985] isapnp: Scanning for PnP cards...
[  316.717280] isapnp: No Plug & Play device found
[  316.757919] Real Time Clock Driver v1.12ac
[  316.758087] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  316.758201] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  316.759183] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
[  316.759200] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[  316.759211] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[  316.760234] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[  316.760586] input: Macintosh mouse button emulation as /class/input/input0
[  316.760739] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[  316.766066] serio: i8042 KBD port at 0x60,0x64 irq 1
[  316.766078] serio: i8042 AUX port at 0x60,0x64 irq 12
[  316.766398] mice: PS/2 mouse device common for all mice
[  316.766580] EISA: Probing bus 0 at eisa.0
[  316.766592] Cannot allocate resource for EISA slot 1
[  316.766595] Cannot allocate resource for EISA slot 2
[  316.766617] EISA: Detected 0 cards.
[  316.766775] TCP cubic registered
[  316.766795] NET: Registered protocol family 1
[  316.766833] Using IPI No-Shortcut mode
[  316.767159]   Magic number: 8:119:823
[  316.767358]   hash matches device ptyt3
[  316.768303] Freeing unused kernel memory: 364k freed
[  316.811797] input: AT Translated Set 2 keyboard as /class/input/input1
[  318.126617] AppArmor: AppArmor initialized<5>audit(1201071055.164:2):  type=1505 info="AppArmor initialized" pid=1195
[  318.138686] fuse init (API version 7.8)
[  318.147463] Failure registering capabilities with primary security module.
[  318.162729] ACPI: Transitioning device [FAN] to D3
[  318.162735] ACPI: Transitioning device [FAN] to D3
[  318.162741] ACPI: Fan [FAN] (off)
[  318.171975] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[  318.173694] ACPI: Thermal Zone [THRM] (46 C)
[  319.163771] usbcore: registered new interface driver usbfs
[  319.163815] usbcore: registered new interface driver hub
[  319.163858] usbcore: registered new device driver usb
[  319.165346] USB Universal Host Controller Interface driver v3.0
[  319.165441] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[  319.165461] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[  319.165467] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[  319.165680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[  319.165714] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0
[  319.165921] usb usb1: configuration #1 chosen from 1 choice
[  319.165964] hub 1-0:1.0: USB hub found
[  319.165977] hub 1-0:1.0: 2 ports detected
[  319.274749] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[  319.274757] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[  319.274777] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[  319.274783] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[  319.274823] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[  319.274856] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80
[  319.275033] usb usb2: configuration #1 chosen from 1 choice
[  319.275076] hub 2-0:1.0: USB hub found
[  319.275091] hub 2-0:1.0: 2 ports detected
[  319.275571] SCSI subsystem initialized
[  319.285262] libata version 2.21 loaded.
[  319.365416] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[  319.365422] e100: Copyright(c) 1999-2006 Intel Corporation
[  319.396423] ata_piix 0000:00:1f.1: version 2.11
[  319.396790] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[  319.396795] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[  319.396858] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[  319.396984] scsi0 : ata_piix
[  319.415940] scsi1 : ata_piix
[  319.416221] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001cfa0 irq 14
[  319.416227] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001cfa8 irq 15
[  319.510385] usb 1-1: new low speed USB device using uhci_hcd and address 2
[  319.578720] ata1.00: ATA-5: TOSHIBA MK3018GAS, Q3.03 E, max UDMA/100
[  319.578727] ata1.00: 58605120 sectors, multi 16: LBA 
[  319.586642] ata1.00: configured for UDMA/100
[  319.644394] Floppy drive(s): fd0 is 1.44M
[  319.661906] FDC 0 is a post-1991 82077
[  319.692556] usb 1-1: configuration #1 chosen from 1 choice
[  319.775028] usbcore: registered new interface driver hiddev
[  319.790007] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input2
[  319.790251] input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
[  319.790277] usbcore: registered new interface driver usbhid
[  319.790283] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    5.268000] Marking TSC unstable due to: possible TSC halt in C2.
[    5.272000] Time: acpi_pm clocksource has been installed.
[    5.288000] ata2.00: ATAPI: Optiarc DVD RW AD-7543A, 1-00, max UDMA/33
[    5.460000] ata2.00: configured for UDMA/33
[    5.460000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3018GA Q3.0 PQ: 0 ANSI: 5
[    5.464000] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7543A  1-00 PQ: 0 ANSI: 5
[    5.464000] PCI: Enabling device 0000:02:07.0 (0000 -> 0002)
[    5.464000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[    5.464000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[    5.516000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[fce07000-fce077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.540000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    5.540000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[    5.568000] e100: eth0: e100_probe: addr 0xfceff000, irq 11, MAC addr 00:08:0D:9E:52:12
[    5.572000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[    5.572000] sd 0:0:0:0: [sda] Write Protect is off
[    5.572000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.572000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.572000] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[    5.572000] sd 0:0:0:0: [sda] Write Protect is off
[    5.572000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.572000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.572000]  sda: sda1 sda2 < sda5 >
[    5.676000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.684000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.684000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    5.728000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.728000] Uniform CD-ROM driver Revision: 3.20
[    5.728000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.016000] Attempting manual resume
[    6.016000] swsusp: Resume From Partition 8:5
[    6.016000] PM: Checking swsusp image.
[    6.016000] PM: Resume from disk failed.
[    6.084000] kjournald starting.  Commit interval 5 seconds
[    6.084000] EXT3-fs: mounted filesystem with ordered data mode.
[    6.792000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000390000199da7]
[   18.924000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.956000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.964000] iTCO_vendor_support: vendor-support=0
[   18.968000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   18.968000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0xee60)
[   18.968000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.980000] intel_rng: FWH not detected
[   19.076000] Linux agpgart interface v0.102 (c) Dave Jones
[   19.112000] agpgart: Detected an Intel 845G Chipset.
[   19.128000] agpgart: AGP aperture is 256M @ 0xe0000000
[   20.044000] nvidia: module license 'NVIDIA' taints kernel.
[   20.304000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[   20.304000] PCI: setting IRQ 10 as level-triggered
[   20.304000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
[   20.308000] Yenta: CardBus bridge found at 0000:02:0a.0 [12a3:ab01]
[   20.308000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   20.308000] Yenta: Routing CardBus interrupts to PCI
[   20.308000] Yenta TI: socket 0000:02:0a.0, mfunc 0x01000002, devctl 0x60
[   20.540000] Yenta: ISA IRQ mask 0x0000, PCI irq 11
[   20.540000] Socket status: 30000059
[   20.540000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   20.540000] cs: IO port probe 0xd000-0xdfff: clean.
[   20.540000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[   20.540000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5bffffff
[   20.540000] Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
[   20.668000] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[   20.668000] Socket status: 30000007
[   20.668000] Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
[   20.668000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   20.668000] cs: IO port probe 0xd000-0xdfff: clean.
[   20.668000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[   20.668000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5bffffff
[   20.668000] Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001]
[   20.836000] Yenta: ISA IRQ mask 0x00b8, PCI irq 11
[   20.836000] Socket status: 30000020
[   20.836000] Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c
[   20.836000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   20.836000] cs: IO port probe 0xd000-0xdfff: clean.
[   20.836000] pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
[   20.836000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5bffffff
[   20.840000] NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.01  Wed Sep  5 19:12:23 PDT 2007
[   21.128000] input: PC Speaker as /class/input/input3
[   21.176000] pccard: PCMCIA card inserted into slot 0
[   21.248000] input: PS/2 Mouse as /class/input/input4
[   21.264000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[   21.340000] pnp: Device 00:0b activated.
[   21.340000] parport_pc 00:0b: reported by Plug and Play ACPI
[   21.340000] pnp: Device 00:0b disabled.
[   21.380000] irda_init()
[   21.380000] NET: Registered protocol family 23
[   21.428000] Detected unconfigured Toshiba laptop with Intel 82801CAM ISA bridge SMSC IrDA chip, pre-configuring device.
[   21.428000] Setting up Intel 82801 controller and SMSC device
[   21.428000] Detected Chip id: 0x5a, setting up registers...
[   21.428000] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[   21.428000] smsc_superio_flat(): fir: 0x130, sir: 0x3f8, dma: 03, irq: 3, mode: 0x0e
[   21.428000] smsc_ircc_present: can't get sir_base of 0x3f8
[   21.472000] pccard: CardBus card inserted into slot 2
[   21.852000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
[   21.852000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   21.852000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   21.892000] cs: memory probe 0xfce00000-0xfcefffff: excluding 0xfce00000-0xfce0ffff 0xfcef0000-0xfcefffff
[   21.900000] pcmcia: registering new device pcmcia0.0
[   22.008000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   22.180000] orinoco 0.15 (David Gibson <email address hidden>, Pavel Roskin <email address hidden>, et al)
[   22.424000] intel8x0_measure_ac97_clock: measured 55391 usecs
[   22.424000] intel8x0: clocking to 48000
[   22.428000] PCI: Enabling device 0000:09:00.0 (0000 -> 0002)
[   22.428000] ACPI: PCI Interrupt 0000:09:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.428000] PCI: Setting latency timer of device 0000:09:00.0 to 64
[   22.428000] ohci_hcd 0000:09:00.0: OHCI Host Controller
[   22.428000] ohci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
[   22.428000] ohci_hcd 0000:09:00.0: irq 11, io mem 0x68000000
[   22.440000] cs: IO port probe 0x100-0x3af: excluding 0x130-0x137
[   22.440000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.440000] cs: IO port probe 0x820-0x8ff: clean.
[   22.440000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.440000] cs: IO port probe 0xa00-0xaff: clean.
[   22.512000] usb usb3: configuration #1 chosen from 1 choice
[   22.512000] hub 3-0:1.0: USB hub found
[   22.512000] hub 3-0:1.0: 3 ports detected
[   22.516000] orinoco_cs 0.15 (David Gibson <email address hidden>, Pavel Roskin <email address hidden>, et al)
[   22.516000] cs: IO port probe 0x100-0x3af: excluding 0x130-0x137
[   22.516000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.520000] cs: IO port probe 0x820-0x8ff: clean.
[   22.520000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.520000] cs: IO port probe 0xa00-0xaff: clean.
[   22.524000] cs: IO port probe 0x100-0x3af: excluding 0x130-0x137
[   22.524000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   22.524000] cs: IO port probe 0x820-0x8ff: clean.
[   22.524000] cs: IO port probe 0xc00-0xcf7: clean.
[   22.524000] cs: IO port probe 0xa00-0xaff: clean.
[   22.528000] pcmcia: request for exclusive IRQ could not be fulfilled.
[   22.528000] pcmcia: the driver needs updating to supported shared IRQ lines.
[   22.608000] eth1: Hardware identity 0005:0004:0005:0000
[   22.608000] eth1: Station identity  001f:0001:0008:000a
[   22.608000] eth1: Firmware determined as Lucent/Agere 8.10
[   22.608000] eth1: Ad-hoc demo mode supported
[   22.608000] eth1: IEEE standard IBSS ad-hoc mode supported
[   22.608000] eth1: WEP supported, 104-bit key
[   22.608000] eth1: MAC address 00:02:2D:81:93:EB
[   22.608000] eth1: Station name "HERMES I"
[   22.608000] eth1: ready
[   22.608000] eth1: orinoco_cs at 0.0, irq 11, io 0xd100-0xd13f
[   22.616000] PCI: Enabling device 0000:09:00.2 (0000 -> 0002)
[   22.616000] ACPI: PCI Interrupt 0000:09:00.2[C] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.616000] ehci_hcd 0000:09:00.2: EHCI Host Controller
[   22.616000] ehci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 4
[   22.640000] ehci_hcd 0000:09:00.2: irq 11, io mem 0x68002000
[   22.640000] ehci_hcd 0000:09:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   22.640000] usb usb4: configuration #1 chosen from 1 choice
[   22.640000] hub 4-0:1.0: USB hub found
[   22.640000] hub 4-0:1.0: 5 ports detected
[   22.744000] PCI: Enabling device 0000:09:00.1 (0000 -> 0002)
[   22.744000] ACPI: PCI Interrupt 0000:09:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.744000] PCI: Setting latency timer of device 0000:09:00.1 to 64
[   22.744000] ohci_hcd 0000:09:00.1: OHCI Host Controller
[   22.744000] ohci_hcd 0000:09:00.1: new USB bus registered, assigned bus number 5
[   22.744000] ohci_hcd 0000:09:00.1: irq 11, io mem 0x68001000
[   22.828000] usb usb5: configuration #1 chosen from 1 choice
[   22.828000] hub 5-0:1.0: USB hub found
[   22.828000] hub 5-0:1.0: 2 ports detected
[   24.188000] lp: driver loaded but no devices found
[   24.300000] Adding 1253028k swap on /dev/sda5.  Priority:-1 extents:1 across:1253028k
[   24.708000] EXT3 FS on sda1, internal journal
[   26.548000] ACPI: AC Adapter [ADP1] (on-line)
[   26.632000] input: Power Button (FF) as /class/input/input6
[   26.640000] ACPI: Power Button (FF) [PWRF]
[   26.700000] input: Lid Switch as /class/input/input7
[   26.708000] ACPI: Lid Switch [LID]
[   26.740000] ACPI: Battery Slot [BAT1] (battery present)
[   26.800000] No dock devices found.
[   26.840000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[   26.840000] toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
[   26.848000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[   26.848000] toshiba_acpi: ktoshkeyd will check 2 times per second
[   26.848000] toshiba_acpi: Dropped 0 keys from the queue on startup
[   26.876000] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[   29.112000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   29.112000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[   29.808000] eth1: New link status: Disconnected (0002)
[   30.360000] ppdev: user-space parallel port driver
[   30.836000] audit(1201071083.825:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4739 profile="/usr/sbin/cupsd"
[   30.928000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   30.928000] apm: overridden by ACPI.
[   31.476000] NET: Registered protocol family 10
[   31.476000] lo: Disabled Privacy Extensions
[   31.476000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.480000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.060000] Failure registering capabilities with primary security module.
[   35.692000] Clocksource tsc unstable (delta = -147080192 ns)
[   36.256000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[   36.256000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   36.256000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   36.856000] /dev/vmmon[5079]: Module vmmon: registered with major=10 minor=165
[   36.856000] /dev/vmmon[5079]: Module vmmon: initialized
[   37.688000] /dev/vmnet: open called by PID 5109 (vmnet-bridge)
[   37.688000] /dev/vmnet: hub 0 does not exist, allocating memory.
[   37.688000] /dev/vmnet: port on hub 0 successfully opened
[   37.688000] bridge-eth0: enabling the bridge
[   37.692000] bridge-eth0: up
[   37.692000] bridge-eth0: already up
[   37.692000] bridge-eth0: attached
[   37.736000] /dev/vmnet: open called by PID 5123 (vmnet-natd)
[   37.736000] /dev/vmnet: hub 8 does not exist, allocating memory.
[   37.740000] /dev/vmnet: port on hub 8 successfully opened
[   37.740000] /dev/vmnet: open called by PID 5124 (vmnet-netifup)
[   37.740000] /dev/vmnet: hub 1 does not exist, allocating memory.
[   37.740000] /dev/vmnet: port on hub 1 successfully opened
[   37.748000] /dev/vmnet: open called by PID 5125 (vmnet-netifup)
[   37.748000] /dev/vmnet: port on hub 8 successfully opened
[   38.348000] /dev/vmnet: open called by PID 5152 (vmnet-dhcpd)
[   38.348000] /dev/vmnet: port on hub 1 successfully opened
[   38.888000] /dev/vmnet: open called by PID 5151 (vmnet-dhcpd)
[   38.888000] /dev/vmnet: port on hub 8 successfully opened
[   47.828000] vmnet1: no IPv6 routers present
[   48.740000] vmnet8: no IPv6 routers present
[   76.264000] NET: Registered protocol family 17
[   76.552000] eth1: New link status: Connected (0001)
[   76.556000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   94.168000] eth1: no IPv6 routers present