[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-09-26 [ 0.000000] Linux version 5.4.0-050400-generic (kernel@tangerine) (gcc version 9.2.1 20191109 (Ubuntu 9.2.1-19ubuntu1)) #201911242031 SMP Mon Nov 25 01:35:10 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-050400-generic root=UUID=01c090f0-c177-4605-9fc7-e06a24916b60 ro quiet splash log_buf_len=32M "dyndbg=file drivers/usb/* +p" vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000006e24cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000006e24d000-0x000000006e24dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006e24e000-0x000000006e24efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006e24f000-0x0000000079db5fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079db6000-0x000000007a24afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a24b000-0x000000007a290fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007a291000-0x000000007aa68fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007aa69000-0x000000007affdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007affe000-0x000000007affefff] usable [ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0080.2019.0725.1139 07/25/2019 [ 0.000000] tsc: Detected 2200.000 MHz processor [ 0.002580] tsc: Detected 2199.996 MHz TSC [ 0.002580] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002582] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002590] last_pfn = 0x27f000 max_arch_pfn = 0x400000000 [ 0.002594] MTRR default type: write-back [ 0.002595] MTRR fixed ranges enabled: [ 0.002596] 00000-9FFFF write-back [ 0.002597] A0000-BFFFF uncachable [ 0.002598] C0000-FFFFF write-protect [ 0.002599] MTRR variable ranges enabled: [ 0.002600] 0 base 0080000000 mask 7F80000000 uncachable [ 0.002601] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.002602] 2 base 007B800000 mask 7FFF800000 uncachable [ 0.002603] 3 disabled [ 0.002603] 4 disabled [ 0.002604] 5 disabled [ 0.002604] 6 disabled [ 0.002605] 7 disabled [ 0.002605] 8 disabled [ 0.002606] 9 disabled [ 0.003167] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003373] last_pfn = 0x7afff max_arch_pfn = 0x400000000 [ 0.012945] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] [ 0.013024] check: Scanning 1 areas for low memory corruption [ 0.013029] Using GB pages for direct mapping [ 0.013031] BRK [0x188001000, 0x188001fff] PGTABLE [ 0.013033] BRK [0x188002000, 0x188002fff] PGTABLE [ 0.013034] BRK [0x188003000, 0x188003fff] PGTABLE [ 0.013093] BRK [0x188004000, 0x188004fff] PGTABLE [ 0.013095] BRK [0x188005000, 0x188005fff] PGTABLE [ 0.013346] BRK [0x188006000, 0x188006fff] PGTABLE [ 0.013400] BRK [0x188007000, 0x188007fff] PGTABLE [ 0.013550] BRK [0x188008000, 0x188008fff] PGTABLE [ 0.013607] BRK [0x188009000, 0x188009fff] PGTABLE [ 0.015604] printk: log_buf_len: 33554432 bytes [ 0.015606] printk: early log buf free: 256948(98%) [ 0.015608] RAMDISK: [mem 0x3334f000-0x3599efff] [ 0.015618] ACPI: Early table checksum verification disabled [ 0.015622] ACPI: RSDP 0x00000000000F05B0 000024 (v02 INTEL ) [ 0.015626] ACPI: XSDT 0x000000007A2590B0 0000E4 (v01 INTEL NUC7i5BN 00000050 AMI 00010013) [ 0.015632] ACPI: FACP 0x000000007A285D48 000114 (v06 INTEL NUC7i5BN 00000050 AMI 00010013) [ 0.015638] ACPI: DSDT 0x000000007A259228 02CB1C (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015641] ACPI: FACS 0x000000007AA68F80 000040 [ 0.015644] ACPI: APIC 0x000000007A285E60 000084 (v03 INTEL NUC7i5BN 00000050 AMI 00010013) [ 0.015647] ACPI: FPDT 0x000000007A285EE8 000044 (v01 INTEL NUC7i5BN 00000050 AMI 00010013) [ 0.015649] ACPI: FIDT 0x000000007A285F30 00009C (v01 INTEL NUC7i5BN 00000050 AMI 00010013) [ 0.015652] ACPI: MCFG 0x000000007A285FD0 00003C (v01 INTEL NUC7i5BN 00000050 MSFT 00000097) [ 0.015655] ACPI: SSDT 0x000000007A286010 000359 (v01 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015658] ACPI: SSDT 0x000000007A286370 003163 (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015661] ACPI: HPET 0x000000007A2894D8 000038 (v01 INTEL NUC7i5BN 00000050 MSFT 0000005F) [ 0.015664] ACPI: SSDT 0x000000007A289510 0009E3 (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015667] ACPI: UEFI 0x000000007A289EF8 000048 (v01 INTEL NUC7i5BN 00000050 01000013) [ 0.015670] ACPI: SSDT 0x000000007A289F40 0017AE (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015673] ACPI: LPIT 0x000000007A28B6F0 000094 (v01 INTEL NUC7i5BN 00000050 MSFT 0000005F) [ 0.015676] ACPI: SSDT 0x000000007A28B788 000141 (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015678] ACPI: SSDT 0x000000007A28B8D0 00029F (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015681] ACPI: SSDT 0x000000007A28BB70 003002 (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015684] ACPI: SSDT 0x000000007A28EB78 0000DB (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015687] ACPI: SSDT 0x000000007A28EC58 0002E9 (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015690] ACPI: DBGP 0x000000007A28EF48 000034 (v01 INTEL NUC7i5BN 00000050 MSFT 0000005F) [ 0.015693] ACPI: DBG2 0x000000007A28EF80 000054 (v00 INTEL NUC7i5BN 00000050 MSFT 0000005F) [ 0.015696] ACPI: SSDT 0x000000007A28EFD8 0012E5 (v02 INTEL NUC7i5BN 00000050 INTL 20160422) [ 0.015699] ACPI: DMAR 0x000000007A2902C0 0000A8 (v01 INTEL NUC7i5BN 00000050 INTL 00000001) [ 0.015702] ACPI: NHLT 0x000000007A290368 00002D (v00 INTEL NUC7i5BN 00000050 01000013) [ 0.015705] ACPI: TPM2 0x000000007A290398 000034 (v04 INTEL NUC7i5BN 00000050 AMI 00000000) [ 0.015707] ACPI: WSMT 0x000000007A2903D0 000028 (v01 INTEL NUC7i5BN 00000050 AMI 00010013) [ 0.015716] ACPI: Local APIC address 0xfee00000 [ 0.015905] No NUMA configuration found [ 0.015906] Faking a node at [mem 0x0000000000000000-0x000000027effffff] [ 0.015916] NODE_DATA(0) allocated [mem 0x27cfd5000-0x27cffffff] [ 0.016174] Zone ranges: [ 0.016175] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.016177] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.016178] Normal [mem 0x0000000100000000-0x000000027effffff] [ 0.016179] Device empty [ 0.016180] Movable zone start for each node [ 0.016183] Early memory node ranges [ 0.016184] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.016185] node 0: [mem 0x0000000000100000-0x000000003fffffff] [ 0.016186] node 0: [mem 0x0000000040400000-0x000000006e24cfff] [ 0.016187] node 0: [mem 0x000000006e24f000-0x0000000079db5fff] [ 0.016188] node 0: [mem 0x000000007affe000-0x000000007affefff] [ 0.016188] node 0: [mem 0x0000000100000000-0x000000027effffff] [ 0.016392] Zeroed struct page in unavailable ranges: 26288 pages [ 0.016393] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff] [ 0.016395] On node 0 totalpages: 2066768 [ 0.016397] DMA zone: 64 pages used for memmap [ 0.016397] DMA zone: 21 pages reserved [ 0.016398] DMA zone: 3995 pages, LIFO batch:0 [ 0.016456] DMA32 zone: 7719 pages used for memmap [ 0.016457] DMA32 zone: 494005 pages, LIFO batch:63 [ 0.026041] Normal zone: 24512 pages used for memmap [ 0.026042] Normal zone: 1568768 pages, LIFO batch:63 [ 0.046909] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] [ 0.047056] ACPI: PM-Timer IO Port: 0x1808 [ 0.047058] ACPI: Local APIC address 0xfee00000 [ 0.047064] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.047065] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.047066] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.047066] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.047094] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.047096] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.047097] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.047098] ACPI: IRQ0 used by override. [ 0.047099] ACPI: IRQ9 used by override. [ 0.047102] Using ACPI (MADT) for SMP configuration information [ 0.047103] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.047106] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.047128] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.047130] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.047131] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.047132] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.047132] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.047134] PM: Registered nosave memory: [mem 0x40000000-0x403fffff] [ 0.047136] PM: Registered nosave memory: [mem 0x6e24d000-0x6e24dfff] [ 0.047136] PM: Registered nosave memory: [mem 0x6e24e000-0x6e24efff] [ 0.047138] PM: Registered nosave memory: [mem 0x79db6000-0x7a24afff] [ 0.047138] PM: Registered nosave memory: [mem 0x7a24b000-0x7a290fff] [ 0.047139] PM: Registered nosave memory: [mem 0x7a291000-0x7aa68fff] [ 0.047140] PM: Registered nosave memory: [mem 0x7aa69000-0x7affdfff] [ 0.047141] PM: Registered nosave memory: [mem 0x7afff000-0x7fffffff] [ 0.047142] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.047142] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.047143] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.047144] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.047144] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.047145] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.047145] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.047146] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.047146] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff] [ 0.047147] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.047147] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.047148] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.047150] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.047151] Booting paravirtualized kernel on bare hardware [ 0.047154] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.047160] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.047320] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.047328] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.047329] pcpu-alloc: [0] 0 1 2 3 [ 0.047358] Built 1 zonelists, mobility grouping on. Total pages: 2034452 [ 0.047358] Policy zone: Normal [ 0.047360] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-050400-generic root=UUID=01c090f0-c177-4605-9fc7-e06a24916b60 ro quiet splash log_buf_len=32M "dyndbg=file drivers/usb/* +p" vt.handoff=1 [ 0.047976] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.048293] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.048346] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.051970] Calgary: detecting Calgary via BIOS EBDA area [ 0.051972] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.068398] Memory: 7951796K/8267072K available (14339K kernel code, 2391K rwdata, 4892K rodata, 2672K init, 5044K bss, 315276K reserved, 0K cma-reserved) [ 0.068528] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.068540] Kernel/User page tables isolation: enabled [ 0.068553] ftrace: allocating 43702 entries in 171 pages [ 0.088645] rcu: Hierarchical RCU implementation. [ 0.088646] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.088647] Tasks RCU enabled. [ 0.088648] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.088649] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.091961] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.092306] random: crng done (trusting CPU's manufacturer) [ 0.092332] Console: colour dummy device 80x25 [ 0.092336] printk: console [tty0] enabled [ 0.092352] ACPI: Core revision 20190816 [ 0.092686] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.092753] APIC: Switch to symmetric I/O mode setup [ 0.092755] DMAR: Host address width 39 [ 0.092756] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.092762] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.092764] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.092768] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.092769] DMAR: RMRR base: 0x0000007ab9a000 end: 0x0000007ade3fff [ 0.092770] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff [ 0.092772] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.092773] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.092774] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.094336] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.094337] x2apic enabled [ 0.094350] Switched APIC routing to cluster x2apic. [ 0.098312] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.116815] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.116819] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=8799984) [ 0.116821] pid_max: default: 32768 minimum: 301 [ 0.116859] LSM: Security Framework initializing [ 0.116870] Yama: becoming mindful. [ 0.116900] AppArmor: AppArmor initialized [ 0.116947] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.116960] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.116973] *** VALIDATE tmpfs *** [ 0.117129] *** VALIDATE proc *** [ 0.117180] *** VALIDATE cgroup1 *** [ 0.117181] *** VALIDATE cgroup2 *** [ 0.117240] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.117264] process: using mwait in idle threads [ 0.117267] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.117268] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.117271] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.117273] Spectre V2 : Mitigation: Full generic retpoline [ 0.117273] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.117274] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.117275] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.117276] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.117277] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.117281] MDS: Mitigation: Clear CPU buffers [ 0.117573] Freeing SMP alternatives memory: 36K [ 0.120892] TSC deadline timer enabled [ 0.120896] smpboot: CPU0: Intel(R) Core(TM) i5-7260U CPU @ 2.20GHz (family: 0x6, model: 0x8e, stepping: 0x9) [ 0.121007] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.121013] ... version: 4 [ 0.121014] ... bit width: 48 [ 0.121014] ... generic registers: 4 [ 0.121015] ... value mask: 0000ffffffffffff [ 0.121016] ... max period: 00007fffffffffff [ 0.121016] ... fixed-purpose events: 3 [ 0.121017] ... event mask: 000000070000000f [ 0.121059] rcu: Hierarchical SRCU implementation. [ 0.123491] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.123548] smp: Bringing up secondary CPUs ... [ 0.123642] x86: Booting SMP configuration: [ 0.123643] .... node #0, CPUs: #1 #2 [ 0.126734] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.126734] #3 [ 0.126734] smp: Brought up 1 node, 4 CPUs [ 0.126734] smpboot: Max logical packages: 1 [ 0.126734] smpboot: Total of 4 processors activated (17599.96 BogoMIPS) [ 0.129049] devtmpfs: initialized [ 0.129049] x86/mm: Memory block size: 128MB [ 0.129697] PM: Registering ACPI NVS region [mem 0x6e24d000-0x6e24dfff] (4096 bytes) [ 0.129697] PM: Registering ACPI NVS region [mem 0x7a291000-0x7aa68fff] (8224768 bytes) [ 0.129697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.129697] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.129697] pinctrl core: initialized pinctrl subsystem [ 0.129697] PM: RTC time: 12:49:46, date: 2020-01-10 [ 0.129697] NET: Registered protocol family 16 [ 0.129697] audit: initializing netlink subsys (disabled) [ 0.129697] audit: type=2000 audit(1578660586.036:1): state=initialized audit_enabled=0 res=1 [ 0.129697] EISA bus registered [ 0.129697] cpuidle: using governor ladder [ 0.129697] cpuidle: using governor menu [ 0.129697] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.129697] ACPI: bus type PCI registered [ 0.129697] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.129697] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.129697] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.129697] PCI: Using configuration type 1 for base access [ 0.129697] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.133013] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.133013] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.133013] ACPI: Added _OSI(Module Device) [ 0.133013] ACPI: Added _OSI(Processor Device) [ 0.133013] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133013] ACPI: Added _OSI(Processor Aggregator Device) [ 0.133013] ACPI: Added _OSI(Linux-Dell-Video) [ 0.133013] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.133013] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.193967] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.204138] ACPI: Dynamic OEM Table Load: [ 0.204145] ACPI: SSDT 0xFFFF9190F3253800 00060F (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.206235] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.208331] ACPI: Dynamic OEM Table Load: [ 0.208337] ACPI: SSDT 0xFFFF9190F2F0D000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.210318] ACPI: Dynamic OEM Table Load: [ 0.210323] ACPI: SSDT 0xFFFF9190F324C0C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.212193] ACPI: Dynamic OEM Table Load: [ 0.212198] ACPI: SSDT 0xFFFF9190F3254800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.214624] ACPI: Dynamic OEM Table Load: [ 0.214632] ACPI: SSDT 0xFFFF9190F32A2000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.217671] ACPI: Dynamic OEM Table Load: [ 0.217676] ACPI: SSDT 0xFFFF9190F2F0CC00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.219733] ACPI: Dynamic OEM Table Load: [ 0.219738] ACPI: SSDT 0xFFFF9190F2F0C000 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.224213] ACPI: EC: EC started [ 0.224214] ACPI: EC: interrupt blocked [ 0.224252] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.224254] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.224255] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions [ 0.224255] ACPI: Interpreter enabled [ 0.224314] ACPI: (supports S0 S3 S4 S5) [ 0.224315] ACPI: Using IOAPIC for interrupt routing [ 0.224370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.225917] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.263109] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.263117] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.263397] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER] [ 0.263659] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 0.263660] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.264826] PCI host bridge to bus 0000:00 [ 0.264828] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.264832] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.264833] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.264834] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.264835] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.264837] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.264848] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 [ 0.265357] pci 0000:00:02.0: [8086:5926] type 00 class 0x030000 [ 0.265371] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit] [ 0.265378] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.265383] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.265622] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.265640] pci 0000:00:08.0: reg 0x10: [mem 0xdc14f000-0xdc14ffff 64bit] [ 0.265871] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.265895] pci 0000:00:14.0: reg 0x10: [mem 0xdc130000-0xdc13ffff 64bit] [ 0.265968] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.266300] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.266323] pci 0000:00:14.2: reg 0x10: [mem 0xdc14e000-0xdc14efff 64bit] [ 0.266560] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.266588] pci 0000:00:16.0: reg 0x10: [mem 0xdc14d000-0xdc14dfff 64bit] [ 0.266667] pci 0000:00:16.0: PME# supported from D3hot [ 0.266966] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.266986] pci 0000:00:17.0: reg 0x10: [mem 0xdc148000-0xdc149fff] [ 0.266994] pci 0000:00:17.0: reg 0x14: [mem 0xdc14c000-0xdc14c0ff] [ 0.267002] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.267010] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.267018] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.267026] pci 0000:00:17.0: reg 0x24: [mem 0xdc14b000-0xdc14b7ff] [ 0.267073] pci 0000:00:17.0: PME# supported from D3hot [ 0.267310] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.267404] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.267704] pci 0000:00:1c.7: [8086:9d17] type 01 class 0x060400 [ 0.267793] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.268084] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.268409] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.268427] pci 0000:00:1f.2: reg 0x10: [mem 0xdc144000-0xdc147fff] [ 0.268697] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 0.268728] pci 0000:00:1f.3: reg 0x10: [mem 0xdc140000-0xdc143fff 64bit] [ 0.268763] pci 0000:00:1f.3: reg 0x20: [mem 0xdc120000-0xdc12ffff 64bit] [ 0.268816] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.269194] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.269254] pci 0000:00:1f.4: reg 0x10: [mem 0xdc14a000-0xdc14a0ff 64bit] [ 0.269324] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.269613] pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000 [ 0.269639] pci 0000:00:1f.6: reg 0x10: [mem 0xdc100000-0xdc11ffff] [ 0.269746] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.270020] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.270025] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.270030] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.270181] pci 0000:3a:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.270219] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc000fff] [ 0.270381] pci 0000:3a:00.0: supports D1 D2 [ 0.270382] pci 0000:3a:00.0: PME# supported from D1 D2 D3hot [ 0.270542] pci 0000:00:1c.7: PCI bridge to [bus 3a] [ 0.270547] pci 0000:00:1c.7: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.272664] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.272744] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.272822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.272900] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.272977] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.273053] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.273129] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.273206] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.273865] ACPI: EC: interrupt unblocked [ 0.273865] ACPI: EC: event unblocked [ 0.273865] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.273865] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions and events [ 0.273868] iommu: Default domain type: Translated [ 0.273868] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.273868] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.273868] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.273868] vgaarb: loaded [ 0.273868] SCSI subsystem initialized [ 0.273868] libata version 3.00 loaded. [ 0.273868] ACPI: bus type USB registered [ 0.273868] usbcore: registered new interface driver usbfs [ 0.273868] usbcore: registered new interface driver hub [ 0.273868] usbcore: registered new device driver usb [ 0.273868] pps_core: LinuxPPS API ver. 1 registered [ 0.273868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.273868] PTP clock support registered [ 0.273868] EDAC MC: Ver: 3.0.0 [ 0.273868] PCI: Using ACPI for IRQ routing [ 0.298501] PCI: pci_cache_line_size set to 64 bytes [ 0.298553] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] [ 0.298554] e820: reserve RAM buffer [mem 0x6e24d000-0x6fffffff] [ 0.298555] e820: reserve RAM buffer [mem 0x79db6000-0x7bffffff] [ 0.298556] e820: reserve RAM buffer [mem 0x7afff000-0x7bffffff] [ 0.298557] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff] [ 0.298658] NetLabel: Initializing [ 0.298659] NetLabel: domain hash size = 128 [ 0.298659] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.298677] NetLabel: unlabeled traffic allowed by default [ 0.298690] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.298690] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.300835] clocksource: Switched to clocksource tsc-early [ 0.313328] *** VALIDATE bpf *** [ 0.313402] VFS: Disk quotas dquot_6.6.0 [ 0.313417] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.313443] *** VALIDATE ramfs *** [ 0.313446] *** VALIDATE hugetlbfs *** [ 0.313522] AppArmor: AppArmor Filesystem Enabled [ 0.313549] pnp: PnP ACPI init [ 0.313682] system 00:00: [mem 0x40000000-0x403fffff] has been reserved [ 0.313687] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.314208] system 00:01: [io 0x0a00-0x0a1f] has been reserved [ 0.314210] system 00:01: [io 0x0a20-0x0a2f] has been reserved [ 0.314211] system 00:01: [io 0x0a30-0x0a3f] has been reserved [ 0.314212] system 00:01: [io 0x0a40-0x0a4f] has been reserved [ 0.314214] system 00:01: [io 0x0a50-0x0a5f] has been reserved [ 0.314215] system 00:01: [io 0x0a60-0x0a6f] has been reserved [ 0.314219] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.314571] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.314573] system 00:02: [io 0xffff] has been reserved [ 0.314574] system 00:02: [io 0xffff] has been reserved [ 0.314575] system 00:02: [io 0xffff] has been reserved [ 0.314576] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.314578] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.314581] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.314720] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.314768] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.314771] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.315152] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.315154] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.315155] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.315156] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.315158] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.315159] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.315160] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.315162] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.315163] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.315165] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.315168] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315219] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.315220] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.315222] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.315223] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.315224] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.315226] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.315229] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.315232] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.315676] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.315679] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317554] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.317556] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.317557] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.317559] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.317560] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.317563] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.318951] pnp: PnP ACPI: found 9 devices [ 0.320254] thermal_sys: Registered thermal governor 'fair_share' [ 0.320254] thermal_sys: Registered thermal governor 'bang_bang' [ 0.320255] thermal_sys: Registered thermal governor 'step_wise' [ 0.320256] thermal_sys: Registered thermal governor 'user_space' [ 0.320256] thermal_sys: Registered thermal governor 'power_allocator' [ 0.324762] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.324796] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 0.324803] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.324805] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.324808] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.324812] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.324815] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.324823] pci 0000:00:1c.7: PCI bridge to [bus 3a] [ 0.324827] pci 0000:00:1c.7: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.324834] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.324835] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.324836] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.324838] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.324839] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.324840] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.324841] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.324842] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.324844] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc0fffff] [ 0.325065] NET: Registered protocol family 2 [ 0.325270] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.325315] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.325449] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.325533] TCP: Hash tables configured (established 65536 bind 65536) [ 0.325567] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.325593] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.325649] NET: Registered protocol family 1 [ 0.325654] NET: Registered protocol family 44 [ 0.325666] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.326028] PCI: CLS 64 bytes, default 64 [ 0.326070] Trying to unpack rootfs image as initramfs... [ 0.994355] Freeing initrd memory: 39232K [ 1.008886] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.008888] software IO TLB: mapped [mem 0x75db6000-0x79db6000] (64MB) [ 1.009112] check: Scanning for low memory corruption every 60 seconds [ 1.010611] Initialise system trusted keyrings [ 1.010620] Key type blacklist registered [ 1.010648] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.012057] zbud: loaded [ 1.012452] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.012622] fuse: init (API version 7.31) [ 1.012644] *** VALIDATE fuse *** [ 1.012645] *** VALIDATE fuse *** [ 1.012777] Platform Keyring initialized [ 1.017586] Key type asymmetric registered [ 1.017587] Asymmetric key parser 'x509' registered [ 1.017596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.017638] io scheduler mq-deadline registered [ 1.018269] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.018327] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.018328] vesafb: scrolling: redraw [ 1.018329] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.018343] vesafb: framebuffer at 0x90000000, mapped to 0x00000000494ecf06, using 1216k, total 1216k [ 1.018426] Console: switching to colour frame buffer device 80x30 [ 1.051235] fb0: VESA VGA frame buffer device [ 1.051249] intel_idle: MWAIT substates: 0x11142120 [ 1.051250] intel_idle: v0.4.1 model 0x8E [ 1.051489] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.051687] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.051709] ACPI: Sleep Button [SLPB] [ 1.051746] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.051763] ACPI: Power Button [PWRB] [ 1.051796] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.051828] ACPI: Power Button [PWRF] [ 1.052910] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.052912] ACPI: Thermal Zone [TZ0] (-263 C) [ 1.053107] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.054931] Linux agpgart interface v0.103 [ 1.055056] tpm_tis MSFT0101:00: IRQ index 0 not found [ 1.119526] loop: module loaded [ 1.119753] libphy: Fixed MDIO Bus: probed [ 1.119754] tun: Universal TUN/TAP device driver, 1.6 [ 1.119804] PPP generic driver version 2.4.2 [ 1.119871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.119873] ehci_hcd: block sizes: qh 144 qtd 96 itd 192 sitd 96 [ 1.119875] ehci-pci: EHCI PCI platform driver [ 1.119886] ehci-platform: EHCI generic platform driver [ 1.119895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.119896] ohci_hcd: block sizes: ed 112 td 96 [ 1.119898] ohci-pci: OHCI PCI platform driver [ 1.119905] ohci-platform: OHCI generic platform driver [ 1.119910] uhci_hcd: USB Universal Host Controller Interface driver [ 1.120148] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.120157] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.120168] xhci_hcd 0000:00:14.0: // Halt the HC [ 1.120171] xhci_hcd 0000:00:14.0: Resetting HCD [ 1.120173] xhci_hcd 0000:00:14.0: // Reset the HC [ 1.121169] xhci_hcd 0000:00:14.0: Wait for controller to be ready for doorbell rings [ 1.121171] xhci_hcd 0000:00:14.0: Reset complete [ 1.121172] xhci_hcd 0000:00:14.0: Enabling 64-bit DMA addresses. [ 1.121173] xhci_hcd 0000:00:14.0: Calling HCD init [ 1.121174] xhci_hcd 0000:00:14.0: xhci_init [ 1.121175] xhci_hcd 0000:00:14.0: xHCI doesn't need link TRB QUIRK [ 1.121178] xhci_hcd 0000:00:14.0: Supported page size register = 0x1 [ 1.121179] xhci_hcd 0000:00:14.0: Supported page size of 4K [ 1.121180] xhci_hcd 0000:00:14.0: HCD page size set to 4K [ 1.121182] xhci_hcd 0000:00:14.0: // xHC can handle at most 64 device slots. [ 1.121184] xhci_hcd 0000:00:14.0: // Setting Max device slots reg = 0x40. [ 1.121187] xhci_hcd 0000:00:14.0: // Device context base array address = 0x26ae2f000 (DMA), 0000000035391308 (virt) [ 1.121190] xhci_hcd 0000:00:14.0: Allocated command ring at 00000000dc406e4b [ 1.121191] xhci_hcd 0000:00:14.0: First segment DMA is 0x26ae30000 [ 1.121194] xhci_hcd 0000:00:14.0: // Setting command ring address to 0x000000026ae30001 [ 1.121197] xhci_hcd 0000:00:14.0: // Doorbell array is located at offset 0x3000 from cap regs base addr [ 1.121198] xhci_hcd 0000:00:14.0: // Allocating event ring [ 1.121202] xhci_hcd 0000:00:14.0: TRB math tests passed. [ 1.121205] xhci_hcd 0000:00:14.0: // Write ERST size = 1 to ir_set 0 (some bits preserved) [ 1.121206] xhci_hcd 0000:00:14.0: // Set ERST entries to point to event ring. [ 1.121207] xhci_hcd 0000:00:14.0: // Set ERST base address for ir_set 0 = 0x26ae33000 [ 1.121212] xhci_hcd 0000:00:14.0: // Write event ring dequeue pointer, preserving EHB bit [ 1.121213] xhci_hcd 0000:00:14.0: Wrote ERST address to ir_set 0. [ 1.121215] xhci_hcd 0000:00:14.0: Allocating 34 scratchpad buffers [ 1.121248] xhci_hcd 0000:00:14.0: Ext Cap 000000009680bdee, port offset = 1, count = 12, revision = 0x2 [ 1.121251] xhci_hcd 0000:00:14.0: PSIV:1 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:12 [ 1.121253] xhci_hcd 0000:00:14.0: PSIV:2 PSIE:1 PLT:0 PFD:0 LP:0 PSIM:1500 [ 1.121255] xhci_hcd 0000:00:14.0: PSIV:3 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:480 [ 1.121260] xhci_hcd 0000:00:14.0: Ext Cap 00000000a527f8d0, port offset = 13, count = 6, revision = 0x3 [ 1.121262] xhci_hcd 0000:00:14.0: PSIV:1 PSIE:2 PLT:0 PFD:1 LP:0 PSIM:1248 [ 1.121264] xhci_hcd 0000:00:14.0: PSIV:2 PSIE:2 PLT:0 PFD:1 LP:0 PSIM:2496 [ 1.121266] xhci_hcd 0000:00:14.0: PSIV:3 PSIE:2 PLT:0 PFD:1 LP:0 PSIM:4992 [ 1.121267] xhci_hcd 0000:00:14.0: Found 12 USB 2.0 ports and 6 USB 3.0 ports. [ 1.121269] xhci_hcd 0000:00:14.0: Finished xhci_init [ 1.121270] xhci_hcd 0000:00:14.0: Called HCD init [ 1.121272] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.121273] xhci_hcd 0000:00:14.0: Got SBRN 48 [ 1.121278] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.121279] xhci_hcd 0000:00:14.0: Finished xhci_pci_reinit [ 1.121280] xhci_hcd 0000:00:14.0: supports USB remote wakeup [ 1.121281] xhci_hcd 0000:00:14.0: xhci_run [ 1.121283] xhci_hcd 0000:00:14.0: Failed to enable MSI-X [ 1.121333] xhci_hcd 0000:00:14.0: ERST deq = 64'h26ae32000 [ 1.121335] xhci_hcd 0000:00:14.0: // Set the interrupt modulation register [ 1.121337] xhci_hcd 0000:00:14.0: // Enable interrupts, cmd = 0x4. [ 1.121340] xhci_hcd 0000:00:14.0: // Enabling event ring interrupter 00000000f1fe292d by writing 0x2 to irq_pending [ 1.121341] xhci_hcd 0000:00:14.0: Finished xhci_run for USB2 roothub [ 1.121459] usb usb1: default language 0x0409 [ 1.121469] usb usb1: udev 1, busnum 1, minor = 0 [ 1.121471] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.121472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.121473] usb usb1: Product: xHCI Host Controller [ 1.121475] usb usb1: Manufacturer: Linux 5.4.0-050400-generic xhci-hcd [ 1.121476] usb usb1: SerialNumber: 0000:00:14.0 [ 1.121582] usb usb1: usb_probe_device [ 1.121584] usb usb1: configuration #1 chosen from 1 choice [ 1.121586] xHCI xhci_add_endpoint called for root hub [ 1.121587] xHCI xhci_check_bandwidth called for root hub [ 1.121594] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.121613] hub 1-0:1.0: usb_probe_interface [ 1.121614] hub 1-0:1.0: usb_probe_interface - got id [ 1.121615] hub 1-0:1.0: USB hub found [ 1.121631] hub 1-0:1.0: 12 ports detected [ 1.121632] hub 1-0:1.0: standalone hub [ 1.121632] hub 1-0:1.0: no power switching (usb 1.0) [ 1.121633] hub 1-0:1.0: individual port over-current protection [ 1.121634] hub 1-0:1.0: Single TT [ 1.121636] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.121637] hub 1-0:1.0: power on to power good time: 20ms [ 1.121642] hub 1-0:1.0: local power source is good [ 1.122964] usb usb1-port8: DeviceRemovable is changed to 1 according to platform information. [ 1.122964] usb usb1-port10: DeviceRemovable is changed to 1 according to platform information. [ 1.122966] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.122979] xhci_hcd 0000:00:14.0: set port power 1-1 ON, portsc: 0x2a0 [ 1.122987] xhci_hcd 0000:00:14.0: set port power 1-2 ON, portsc: 0x2a0 [ 1.122994] xhci_hcd 0000:00:14.0: set port power 1-3 ON, portsc: 0x2a0 [ 1.123001] xhci_hcd 0000:00:14.0: set port power 1-4 ON, portsc: 0x2a0 [ 1.123008] xhci_hcd 0000:00:14.0: set port power 1-5 ON, portsc: 0x2a0 [ 1.123015] xhci_hcd 0000:00:14.0: set port power 1-6 ON, portsc: 0x2a0 [ 1.123022] xhci_hcd 0000:00:14.0: set port power 1-7 ON, portsc: 0x2a0 [ 1.123029] xhci_hcd 0000:00:14.0: set port power 1-8 ON, portsc: 0x2a0 [ 1.123036] xhci_hcd 0000:00:14.0: set port power 1-9 ON, portsc: 0x2a0 [ 1.123044] xhci_hcd 0000:00:14.0: set port power 1-10 ON, portsc: 0x2a0 [ 1.123051] xhci_hcd 0000:00:14.0: set port power 1-11 ON, portsc: 0x2a0 [ 1.123058] xhci_hcd 0000:00:14.0: set port power 1-12 ON, portsc: 0x2a0 [ 1.123185] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.123190] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.123192] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.123193] xhci_hcd 0000:00:14.0: supports USB remote wakeup [ 1.123196] xhci_hcd 0000:00:14.0: // Turn on HC, cmd = 0x5. [ 1.123198] xhci_hcd 0000:00:14.0: Finished xhci_run for USB3 roothub [ 1.123218] usb usb2: skipped 1 descriptor after endpoint [ 1.123221] usb usb2: default language 0x0409 [ 1.123231] usb usb2: udev 1, busnum 2, minor = 128 [ 1.123233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.123234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.123235] usb usb2: Product: xHCI Host Controller [ 1.123236] usb usb2: Manufacturer: Linux 5.4.0-050400-generic xhci-hcd [ 1.123237] usb usb2: SerialNumber: 0000:00:14.0 [ 1.123341] usb usb2: usb_probe_device [ 1.123342] usb usb2: configuration #1 chosen from 1 choice [ 1.123344] xHCI xhci_add_endpoint called for root hub [ 1.123345] xHCI xhci_check_bandwidth called for root hub [ 1.123353] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.123370] hub 2-0:1.0: usb_probe_interface [ 1.123371] hub 2-0:1.0: usb_probe_interface - got id [ 1.123372] hub 2-0:1.0: USB hub found [ 1.123387] hub 2-0:1.0: 6 ports detected [ 1.123388] hub 2-0:1.0: standalone hub [ 1.123389] hub 2-0:1.0: no power switching (usb 1.0) [ 1.123390] hub 2-0:1.0: individual port over-current protection [ 1.123391] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.123392] hub 2-0:1.0: power on to power good time: 20ms [ 1.123397] hub 2-0:1.0: local power source is good [ 1.123519] usb usb2-port1: peered to usb1-port1 [ 1.123636] usb usb2-port2: peered to usb1-port2 [ 1.123752] usb usb2-port3: peered to usb1-port3 [ 1.123866] usb usb2-port4: peered to usb1-port4 [ 1.123980] usb usb2-port5: peered to usb1-port11 [ 1.124097] usb: failed to peer usb2-port6 and usb1-port11 by location (usb2-port6:none) (usb1-port11:usb2-port5) [ 1.124099] usb usb2-port6: failed to peer to usb1-port11 (-16) [ 1.124099] usb: port power management may be unreliable [ 1.124103] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.124110] xhci_hcd 0000:00:14.0: set port power 2-1 ON, portsc: 0x802a0 [ 1.124119] xhci_hcd 0000:00:14.0: set port power 2-2 ON, portsc: 0x802a0 [ 1.124126] xhci_hcd 0000:00:14.0: set port power 2-3 ON, portsc: 0x802a0 [ 1.124134] xhci_hcd 0000:00:14.0: set port power 2-4 ON, portsc: 0x802a0 [ 1.124141] xhci_hcd 0000:00:14.0: set port power 2-5 ON, portsc: 0x802a0 [ 1.124148] xhci_hcd 0000:00:14.0: set port power 2-6 ON, portsc: 0x802a0 [ 1.124442] i8042: PNP: No PS/2 controller found. [ 1.124581] mousedev: PS/2 mouse device common for all mice [ 1.124753] rtc_cmos 00:03: RTC can wake from S4 [ 1.125273] rtc_cmos 00:03: registered as rtc0 [ 1.125286] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.125292] i2c /dev entries driver [ 1.125337] device-mapper: uevent: version 1.0.3 [ 1.125398] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 1.125418] platform eisa.0: Probing EISA bus 0 [ 1.125419] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.125421] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.125422] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.125423] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.125424] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.125425] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.125426] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.125427] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.125428] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.125429] platform eisa.0: EISA: Detected 0 cards [ 1.125432] intel_pstate: Intel P-state driver initializing [ 1.125705] intel_pstate: HWP enabled [ 1.125727] ledtrig-cpu: registered to indicate activity on CPUs [ 1.125762] intel_pmc_core INT33A1:00: initialized [ 1.125822] drop_monitor: Initializing network drop monitor service [ 1.125937] NET: Registered protocol family 10 [ 1.130214] Segment Routing with IPv6 [ 1.130230] NET: Registered protocol family 17 [ 1.130308] Key type dns_resolver registered [ 1.130501] RAS: Correctable Errors collector initialized. [ 1.130520] microcode: sig=0x806e9, pf=0x40, revision=0xca [ 1.130548] microcode: Microcode Update Driver: v2.2. [ 1.130551] IPI shorthand broadcast: enabled [ 1.130555] sched_clock: Marking stable (1129980029, 565325)->(1144959967, -14414613) [ 1.130601] registered taskstats version 1 [ 1.130610] Loading compiled-in X.509 certificates [ 1.131664] Loaded X.509 cert 'Build time autogenerated kernel key: 1737de1a698778a886e969309e317cd4a1ff29d7' [ 1.131682] zswap: loaded using pool lzo/zbud [ 1.131722] Key type ._fscrypt registered [ 1.131722] Key type .fscrypt registered [ 1.135312] Key type big_key registered [ 1.135316] Key type trusted registered [ 1.137167] Key type encrypted registered [ 1.137169] AppArmor: AppArmor sha1 policy hashing enabled [ 1.137175] ima: Allocated hash algorithm: sha1 [ 1.142198] xhci_hcd 0000:00:14.0: Port change event, 1-2, id 2, portsc: 0x206e1 [ 1.142200] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.142212] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x20ae1 [ 1.142213] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.142223] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x20ae1 [ 1.142225] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.178656] ima: No architecture policies found [ 1.178667] evm: Initialising EVM extended attributes: [ 1.178667] evm: security.selinux [ 1.178668] evm: security.SMACK64 [ 1.178668] evm: security.SMACK64EXEC [ 1.178668] evm: security.SMACK64TRANSMUTE [ 1.178669] evm: security.SMACK64MMAP [ 1.178669] evm: security.apparmor [ 1.178669] evm: security.ima [ 1.178669] evm: security.capability [ 1.178670] evm: HMAC attrs: 0x1 [ 1.179572] PM: Magic number: 4:778:834 [ 1.179760] rtc_cmos 00:03: setting system clock to 2020-01-10T12:49:47 UTC (1578660587) [ 1.180620] Freeing unused decrypted memory: 2040K [ 1.180907] Freeing unused kernel image memory: 2672K [ 1.184865] Write protecting the kernel read-only data: 22528k [ 1.185246] Freeing unused kernel image memory: 2008K [ 1.185389] Freeing unused kernel image memory: 1252K [ 1.192867] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.192868] x86/mm: Checking user space page tables [ 1.200240] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.200242] Run /init as init process [ 1.224836] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x802a0, return 0x2002a0 [ 1.224850] xhci_hcd 0000:00:14.0: clear port1 warm(BH) reset change, portsc: 0x2a0 [ 1.224859] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x802a0, return 0x2002a0 [ 1.224868] xhci_hcd 0000:00:14.0: clear port2 warm(BH) reset change, portsc: 0x2a0 [ 1.224874] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x802a0, return 0x2002a0 [ 1.224882] xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x2a0 [ 1.224889] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x802a0, return 0x2002a0 [ 1.224897] xhci_hcd 0000:00:14.0: clear port4 warm(BH) reset change, portsc: 0x2a0 [ 1.224902] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x802a0, return 0x2002a0 [ 1.224910] xhci_hcd 0000:00:14.0: clear port5 warm(BH) reset change, portsc: 0x2a0 [ 1.224915] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x802a0, return 0x2002a0 [ 1.224922] xhci_hcd 0000:00:14.0: clear port6 warm(BH) reset change, portsc: 0x2a0 [ 1.224930] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100 [ 1.224937] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x206e1, return 0x10101 [ 1.224946] usb usb1-port2: status 0101 change 0001 [ 1.224952] xhci_hcd 0000:00:14.0: clear port2 connect change, portsc: 0x6e1 [ 1.224964] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x20ae1, return 0x10301 [ 1.224968] usb usb1-port3: status 0301 change 0001 [ 1.224973] xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0xae1 [ 1.224978] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x20ae1, return 0x10301 [ 1.224982] usb usb1-port4: status 0301 change 0001 [ 1.224986] xhci_hcd 0000:00:14.0: clear port4 connect change, portsc: 0xae1 [ 1.224992] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x2a0, return 0x100 [ 1.224998] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100 [ 1.225003] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x2a0, return 0x100 [ 1.225008] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100 [ 1.225013] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100 [ 1.225018] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100 [ 1.225025] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100 [ 1.225031] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100 [ 1.240831] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 1.285869] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.285869] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.286081] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.287843] ahci 0000:00:17.0: version 3.0 [ 1.288076] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 1.288078] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.288521] scsi host0: ahci [ 1.288650] scsi host1: ahci [ 1.288740] scsi host2: ahci [ 1.288786] ata1: SATA max UDMA/133 abar m2048@0xdc14b000 port 0xdc14b100 irq 127 [ 1.288787] ata2: DUMMY [ 1.288788] ata3: SATA max UDMA/133 abar m2048@0xdc14b000 port 0xdc14b200 irq 127 [ 1.329715] hub 1-0:1.0: state 7 ports 12 chg 001c evt 0000 [ 1.329723] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x6e1, return 0x101 [ 1.329732] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.329742] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0 [ 1.329753] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 1.329758] usb usb1-port2: status 0101, change 0000, 12 Mb/s [ 1.329763] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.329770] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0 [ 1.329785] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0 [ 1.329794] xhci_hcd 0000:00:14.0: Slot 1 output ctx = 0x26a187000 (dma) [ 1.329796] xhci_hcd 0000:00:14.0: Slot 1 input ctx = 0x26a188000 (dma) [ 1.329800] xhci_hcd 0000:00:14.0: Set slot id 1 dcbaa entry 0000000063875ec2 to 0x26a187000 [ 1.329819] xhci_hcd 0000:00:14.0: set port reset, actual port 1 status = 0x791 [ 1.329831] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 4 status = 0xe0002a0 [ 1.329839] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 5 status = 0xe0002a0 [ 1.329845] hub 2-0:1.0: hub_suspend [ 1.329851] usb usb2: bus auto-suspend, wakeup 1 [ 1.329867] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 1.332831] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 1.387651] xhci_hcd 0000:00:14.0: Port change event, 1-2, id 2, portsc: 0x200e03 [ 1.387653] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.396871] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x200e03, return 0x100503 [ 1.396881] xhci_hcd 0000:00:14.0: clear port2 reset change, portsc: 0xe03 [ 1.457054] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.457057] xhci_hcd 0000:00:14.0: Set root hub portnum to 2 [ 1.457058] xhci_hcd 0000:00:14.0: Set fake root hub portnum to 2 [ 1.457059] xhci_hcd 0000:00:14.0: udev->tt = 000000002c5b14ed [ 1.457060] xhci_hcd 0000:00:14.0: udev->ttport = 0x0 [ 1.457062] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.457077] xhci_hcd 0000:00:14.0: Successful setup context command [ 1.457079] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 1.457080] xhci_hcd 0000:00:14.0: Slot ID 1 dcbaa entry @0000000063875ec2 = 0x0000026a187000 [ 1.457081] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x26a187000 [ 1.457082] xhci_hcd 0000:00:14.0: Internal device address = 0 [ 1.459190] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.459242] xhci_hcd 0000:00:14.0: set port reset, actual port 1 status = 0xf91 [ 1.489053] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 1.516935] xhci_hcd 0000:00:14.0: Port change event, 1-2, id 2, portsc: 0x200e03 [ 1.516939] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.524871] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x200e03, return 0x100503 [ 1.524880] xhci_hcd 0000:00:14.0: clear port2 reset change, portsc: 0xe03 [ 1.532646] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.589049] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 1.589053] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.589067] xhci_hcd 0000:00:14.0: Completed reset device command. [ 1.589119] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 1) in default state [ 1.589120] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 1.589123] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.589570] xhci_hcd 0000:00:14.0: Successful setup address command [ 1.589578] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 1.589579] xhci_hcd 0000:00:14.0: Slot ID 1 dcbaa entry @0000000063875ec2 = 0x0000026a187000 [ 1.589580] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x26a187000 [ 1.589581] xhci_hcd 0000:00:14.0: Internal device address = 1 [ 1.604541] ata1: SATA link down (SStatus 4 SControl 300) [ 1.604565] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.604771] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 94:c6:91:17:6b:97 [ 1.604772] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.604865] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.605770] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 1.608617] ata3.00: ATA-9: WDC WDS120G1G0B-00RC30, Z3311000, max UDMA/133 [ 1.608618] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.617416] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.617458] usb 1-2: default language 0x0409 [ 1.618341] ata3.00: configured for UDMA/133 [ 1.624956] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.628597] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.628611] ahci 0000:00:17.0: port does not support device sleep [ 1.628620] usb 1-2: udev 2, busnum 1, minor = 1 [ 1.628622] usb 1-2: New USB device found, idVendor=046d, idProduct=085a, bcdDevice=32.98 [ 1.628623] usb 1-2: New USB device strings: Mfr=10, Product=11, SerialNumber=0 [ 1.628624] usb 1-2: Product: Logi Group [ 1.628624] usb 1-2: Manufacturer: Logi [ 1.628699] usb 1-2: usb_probe_device [ 1.628700] usb 1-2: configuration #1 chosen from 1 choice [ 1.628711] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8 [ 1.628713] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000ebe1d304 [ 1.628716] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.628870] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 1.628877] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.628903] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 2 [ 1.628912] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.629411] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 1.629461] hub 1-2:1.0: usb_probe_interface [ 1.629463] hub 1-2:1.0: usb_probe_interface - got id [ 1.629466] hub 1-2:1.0: USB hub found [ 1.629485] scsi 2:0:0:0: Direct-Access ATA WDC WDS120G1G0B- 1000 PQ: 0 ANSI: 5 [ 1.629712] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.629744] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.629758] sd 2:0:0:0: [sda] Write Protect is off [ 1.629759] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.629775] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.631033] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.631040] hub 1-2:1.0: 2 ports detected [ 1.631041] hub 1-2:1.0: compound device; port removable status: FF [ 1.631041] hub 1-2:1.0: ganged power switching [ 1.631042] hub 1-2:1.0: global over-current protection [ 1.631044] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000ebe1d304 [ 1.631051] xhci_hcd 0000:00:14.0: drop ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x0 [ 1.631060] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 1, new drop flags = 0x8, new add flags = 0x8 [ 1.631061] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000ebe1d304 [ 1.631063] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.631231] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 1.631485] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.631494] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 2 [ 1.631501] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.631674] hub 1-2:1.0: TT per port [ 1.631675] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns) [ 1.631675] hub 1-2:1.0: power on to power good time: 100ms [ 1.632079] hub 1-2:1.0: local power source is good [ 1.632080] hub 1-2:1.0: no over-current condition exists [ 1.632098] xhci_hcd 0000:00:14.0: xHCI version 100 needs hub TT think time and number of ports [ 1.632099] xhci_hcd 0000:00:14.0: Set up configure endpoint for hub device. [ 1.632099] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.632264] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 1.632265] hub 1-2:1.0: enabling power on all ports [ 1.632890] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0xae1, return 0x301 [ 1.632897] usb usb1-port3: status 0301, change 0000, 1.5 Mb/s [ 1.632900] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.632918] xhci_hcd 0000:00:14.0: Slot 2 output ctx = 0x26ab09000 (dma) [ 1.632920] xhci_hcd 0000:00:14.0: Slot 2 input ctx = 0x269da9000 (dma) [ 1.632923] xhci_hcd 0000:00:14.0: Set slot id 2 dcbaa entry 00000000cde3c66f to 0x26ab09000 [ 1.632941] xhci_hcd 0000:00:14.0: set port reset, actual port 2 status = 0xb91 [ 1.649851] sda: sda1 sda2 [ 1.650119] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.690697] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x200a03 [ 1.690702] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.701060] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x200a03, return 0x100303 [ 1.701076] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0xa03 [ 1.737083] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 1.737642] usb 1-2-port1: status 0101 change 0001 [ 1.738572] usb 1-2-port2: status 0101 change 0001 [ 1.761076] usb 1-3: new low-speed USB device number 3 using xhci_hcd [ 1.761080] xhci_hcd 0000:00:14.0: Set root hub portnum to 3 [ 1.761081] xhci_hcd 0000:00:14.0: Set fake root hub portnum to 3 [ 1.761082] xhci_hcd 0000:00:14.0: udev->tt = 00000000735b9339 [ 1.761083] xhci_hcd 0000:00:14.0: udev->ttport = 0x3 [ 1.761085] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.761180] xhci_hcd 0000:00:14.0: Successful setup context command [ 1.761188] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 1.761189] xhci_hcd 0000:00:14.0: Slot ID 2 dcbaa entry @00000000cde3c66f = 0x0000026ab09000 [ 1.761190] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x26ab09000 [ 1.761191] xhci_hcd 0000:00:14.0: Internal device address = 0 [ 1.762182] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.762237] xhci_hcd 0000:00:14.0: set port reset, actual port 2 status = 0xb91 [ 1.821046] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x200a03 [ 1.821051] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 1.829105] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x200a03, return 0x100303 [ 1.829121] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0xa03 [ 1.841105] hub 1-2:1.0: state 7 ports 2 chg 0006 evt 0000 [ 1.841573] usb 1-2-port1: status 0101, change 0000, 12 Mb/s [ 1.841577] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.841605] xhci_hcd 0000:00:14.0: Slot 3 output ctx = 0x26abe8000 (dma) [ 1.841607] xhci_hcd 0000:00:14.0: Slot 3 input ctx = 0x269ecd000 (dma) [ 1.841610] xhci_hcd 0000:00:14.0: Set slot id 3 dcbaa entry 0000000046d108e4 to 0x26abe8000 [ 1.889122] xhci_hcd 0000:00:14.0: Resetting device with slot ID 2 [ 1.889125] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.889178] xhci_hcd 0000:00:14.0: Completed reset device command. [ 1.889225] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 2) in default state [ 1.889226] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 1.889229] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.889977] xhci_hcd 0000:00:14.0: Successful setup address command [ 1.889985] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 1.889986] xhci_hcd 0000:00:14.0: Slot ID 2 dcbaa entry @00000000cde3c66f = 0x0000026ab09000 [ 1.889987] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x26ab09000 [ 1.889988] xhci_hcd 0000:00:14.0: Internal device address = 2 [ 1.912909] usb 1-3: skipped 1 descriptor after interface [ 1.913577] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.913626] usb 1-3: default language 0x0409 [ 1.915746] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.917019] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.917032] usb 1-3: udev 3, busnum 1, minor = 2 [ 1.917034] usb 1-3: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09 [ 1.917035] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.917036] usb 1-3: Product: USB NetVista Full Width Keyboard. [ 1.917037] usb 1-3: Manufacturer: LITE-ON Technology [ 1.917185] usb 1-3: usb_probe_device [ 1.917187] usb 1-3: configuration #1 chosen from 1 choice [ 1.917190] usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 1.917200] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x8 [ 1.917202] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000009c407f8d [ 1.917204] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.917442] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 1.917450] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.917510] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 2 [ 1.917554] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.919834] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.919886] usb 1-3: adding 1-3:1.0 (config #1, interface 0) [ 1.921018] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 1.921098] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0xae1, return 0x301 [ 1.921112] usb usb1-port4: status 0301, change 0000, 1.5 Mb/s [ 1.921117] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.921141] xhci_hcd 0000:00:14.0: Slot 4 output ctx = 0x269ce4000 (dma) [ 1.921145] xhci_hcd 0000:00:14.0: Slot 4 input ctx = 0x26a937000 (dma) [ 1.921152] xhci_hcd 0000:00:14.0: Set slot id 4 dcbaa entry 000000006a1a3622 to 0x269ce4000 [ 1.985123] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 1.989103] usb 1-2.1: new high-speed USB device number 4 using xhci_hcd [ 1.989107] xhci_hcd 0000:00:14.0: Set root hub portnum to 2 [ 1.989107] xhci_hcd 0000:00:14.0: Set fake root hub portnum to 2 [ 1.989109] xhci_hcd 0000:00:14.0: udev->tt = 000000002c5b14ed [ 1.989109] xhci_hcd 0000:00:14.0: udev->ttport = 0x0 [ 1.989111] xhci_hcd 0000:00:14.0: // Ding dong! [ 1.989133] xhci_hcd 0000:00:14.0: Successful setup context command [ 1.989135] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 1.989136] xhci_hcd 0000:00:14.0: Slot ID 3 dcbaa entry @0000000046d108e4 = 0x0000026abe8000 [ 1.989137] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x26abe8000 [ 1.989138] xhci_hcd 0000:00:14.0: Internal device address = 0 [ 1.989278] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.013097] tsc: Refined TSC clocksource calibration: 2207.989 MHz [ 2.013102] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3adb8947, max_idle_ns: 440795278464 ns [ 2.013143] clocksource: Switched to clocksource tsc [ 2.069122] xhci_hcd 0000:00:14.0: Resetting device with slot ID 3 [ 2.069125] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.069142] xhci_hcd 0000:00:14.0: Completed reset device command. [ 2.069150] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 3) in default state [ 2.069151] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 2.069153] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.069298] xhci_hcd 0000:00:14.0: Successful setup address command [ 2.069304] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 2.069305] xhci_hcd 0000:00:14.0: Slot ID 3 dcbaa entry @0000000046d108e4 = 0x0000026abe8000 [ 2.069306] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x26abe8000 [ 2.069307] xhci_hcd 0000:00:14.0: Internal device address = 3 [ 2.089325] xhci_hcd 0000:00:14.0: set port reset, actual port 3 status = 0xb91 [ 2.147052] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x200a03 [ 2.147057] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 2.157128] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x200a03, return 0x100303 [ 2.157144] xhci_hcd 0000:00:14.0: clear port4 reset change, portsc: 0xa03 [ 2.166458] usb 1-2.1: skipped 1 descriptor after configuration [ 2.166460] usb 1-2.1: skipped 11 descriptors after interface [ 2.166461] usb 1-2.1: skipped 1 descriptor after endpoint [ 2.166462] usb 1-2.1: skipped 41 descriptors after interface [ 2.166464] usb 1-2.1: skipped 1 descriptor after interface [ 2.166607] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.166618] usb 1-2.1: default language 0x0409 [ 2.168883] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.169044] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.169056] usb 1-2.1: USB interface quirks for this device: 2 [ 2.169057] usb 1-2.1: udev 4, busnum 1, minor = 3 [ 2.169059] usb 1-2.1: New USB device found, idVendor=046d, idProduct=086e, bcdDevice= 0.18 [ 2.169060] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 2.169060] usb 1-2.1: Product: Logi Group Camera [ 2.169061] usb 1-2.1: SerialNumber: 610D8CD4 [ 2.169138] usb 1-2.1: usb_probe_device [ 2.169140] usb 1-2.1: configuration #1 chosen from 1 choice [ 2.169155] xhci_hcd 0000:00:14.0: add ep 0x86, slot id 3, new drop flags = 0x0, new add flags = 0x2000 [ 2.169161] xhci_hcd 0000:00:14.0: add ep 0x84, slot id 3, new drop flags = 0x0, new add flags = 0x2200 [ 2.169163] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000a380570a [ 2.169165] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.169595] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 2.169604] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.169621] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 12 [ 2.169628] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.170174] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.170190] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 8 [ 2.170198] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.170941] usb 1-2.1: adding 1-2.1:1.0 (config #1, interface 0) [ 2.170987] usb 1-2.1: adding 1-2.1:1.1 (config #1, interface 1) [ 2.170999] usb 1-2.1: adding 1-2.1:1.2 (config #1, interface 2) [ 2.171494] usb 1-2-port2: status 0101, change 0000, 12 Mb/s [ 2.171498] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.171521] xhci_hcd 0000:00:14.0: Slot 5 output ctx = 0x269ef0000 (dma) [ 2.171524] xhci_hcd 0000:00:14.0: Slot 5 input ctx = 0x269ef4000 (dma) [ 2.171528] xhci_hcd 0000:00:14.0: Set slot id 5 dcbaa entry 0000000064a5aecc to 0x269ef0000 [ 2.217064] usb 1-4: new low-speed USB device number 5 using xhci_hcd [ 2.217068] xhci_hcd 0000:00:14.0: Set root hub portnum to 4 [ 2.217068] xhci_hcd 0000:00:14.0: Set fake root hub portnum to 4 [ 2.217070] xhci_hcd 0000:00:14.0: udev->tt = 00000000735b9339 [ 2.217070] xhci_hcd 0000:00:14.0: udev->ttport = 0x4 [ 2.217072] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.217159] xhci_hcd 0000:00:14.0: Successful setup context command [ 2.217167] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 2.217168] xhci_hcd 0000:00:14.0: Slot ID 4 dcbaa entry @000000006a1a3622 = 0x00000269ce4000 [ 2.217169] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x269ce4000 [ 2.217170] xhci_hcd 0000:00:14.0: Internal device address = 0 [ 2.217851] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.217904] xhci_hcd 0000:00:14.0: set port reset, actual port 3 status = 0xb91 [ 2.233069] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 2.275599] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x200a03 [ 2.275604] xhci_hcd 0000:00:14.0: handle_port_status: starting port polling. [ 2.285071] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x200a03, return 0x100303 [ 2.285086] xhci_hcd 0000:00:14.0: clear port4 reset change, portsc: 0xa03 [ 2.345064] xhci_hcd 0000:00:14.0: Resetting device with slot ID 4 [ 2.345067] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.345133] xhci_hcd 0000:00:14.0: Completed reset device command. [ 2.345177] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 4) in default state [ 2.345178] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 2.345181] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.345673] xhci_hcd 0000:00:14.0: Successful setup address command [ 2.345681] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 2.345683] xhci_hcd 0000:00:14.0: Slot ID 4 dcbaa entry @000000006a1a3622 = 0x00000269ce4000 [ 2.345683] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x269ce4000 [ 2.345684] xhci_hcd 0000:00:14.0: Internal device address = 4 [ 2.367711] usb 1-4: skipped 1 descriptor after interface [ 2.368352] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.368403] usb 1-4: default language 0x0409 [ 2.369681] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.370431] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.370482] usb 1-4: udev 5, busnum 1, minor = 4 [ 2.370484] usb 1-4: New USB device found, idVendor=17ef, idProduct=6019, bcdDevice= 1.00 [ 2.370485] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.370486] usb 1-4: Product: Lenovo USB Optical Mouse [ 2.370487] usb 1-4: Manufacturer: PixArt [ 2.370635] usb 1-4: usb_probe_device [ 2.370637] usb 1-4: configuration #1 chosen from 1 choice [ 2.370641] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.370656] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 4, new drop flags = 0x0, new add flags = 0x8 [ 2.370659] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000d06b8b6b [ 2.370662] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.370945] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 2.370952] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.371006] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 4 ep 2 [ 2.371046] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.372067] usb 1-4: adding 1-4:1.0 (config #1, interface 0) [ 2.374270] hidraw: raw HID events driver (C) Jiri Kosina [ 2.375380] usbhid 1-3:1.0: usb_probe_interface [ 2.375382] usbhid 1-3:1.0: usb_probe_interface - got id [ 2.377737] usbhid 1-2.1:1.2: usb_probe_interface [ 2.377738] usbhid 1-2.1:1.2: usb_probe_interface - got id [ 2.377786] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.377864] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 3 ep 0 [ 2.377866] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring [ 2.377867] xhci_hcd 0000:00:14.0: Finding endpoint context [ 2.377868] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 2.377869] xhci_hcd 0000:00:14.0: New dequeue segment = 00000000180f5744 (virtual) [ 2.377870] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x269ece1c0 (DMA) [ 2.377870] xhci_hcd 0000:00:14.0: Queueing new dequeue state [ 2.377872] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 00000000180f5744 (0x269ece000 dma), new deq ptr = 0000000091ada82e (0x269ece1c0 dma), new cycle = 1 [ 2.377873] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.377879] xhci_hcd 0000:00:14.0: Giveback URB 0000000011c5b7d8, len = 0, expected = 0, status = -32 [ 2.377908] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1 [ 2.377910] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @269ece1c0 [ 2.378070] usbhid 1-4:1.0: usb_probe_interface [ 2.378072] usbhid 1-4:1.0: usb_probe_interface - got id [ 2.379395] usbcore: registered new interface driver usbhid [ 2.379396] usbhid: USB HID core driver [ 2.380772] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04B3:3025.0001/input/input3 [ 2.437320] hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-3/input0 [ 2.437418] input: Logi Group Camera Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:086E.0002/input/input4 [ 2.445068] usb 1-2.2: new full-speed USB device number 6 using xhci_hcd [ 2.445071] xhci_hcd 0000:00:14.0: Set root hub portnum to 2 [ 2.445072] xhci_hcd 0000:00:14.0: Set fake root hub portnum to 2 [ 2.445074] xhci_hcd 0000:00:14.0: udev->tt = 00000000442a3601 [ 2.445074] xhci_hcd 0000:00:14.0: udev->ttport = 0x2 [ 2.445076] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.445099] xhci_hcd 0000:00:14.0: Successful setup context command [ 2.445105] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 2.445106] xhci_hcd 0000:00:14.0: Slot ID 5 dcbaa entry @0000000064a5aecc = 0x00000269ef0000 [ 2.445107] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x269ef0000 [ 2.445108] xhci_hcd 0000:00:14.0: Internal device address = 0 [ 2.445403] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.481077] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling. [ 2.497307] hid-generic 0003:046D:086E.0002: input,hidraw1: USB HID v1.11 Device [Logi Group Camera] on usb-0000:00:14.0-2.1/input2 [ 2.497406] input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:17EF:6019.0003/input/input5 [ 2.497658] hid-generic 0003:17EF:6019.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:14.0-4/input0 [ 2.525027] xhci_hcd 0000:00:14.0: Resetting device with slot ID 5 [ 2.525031] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.525041] xhci_hcd 0000:00:14.0: Completed reset device command. [ 2.525046] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 5) in default state [ 2.525046] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 2.525049] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.525322] xhci_hcd 0000:00:14.0: Successful setup address command [ 2.525328] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x0000026ae2f000 [ 2.525330] xhci_hcd 0000:00:14.0: Slot ID 5 dcbaa entry @0000000064a5aecc = 0x00000269ef0000 [ 2.525331] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x269ef0000 [ 2.525362] xhci_hcd 0000:00:14.0: Internal device address = 5 [ 2.545705] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 5 ep 0 [ 2.545710] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring [ 2.545711] xhci_hcd 0000:00:14.0: Finding endpoint context [ 2.545712] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 2.545713] xhci_hcd 0000:00:14.0: New dequeue segment = 00000000235d3503 (virtual) [ 2.545714] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x269ef5090 (DMA) [ 2.545714] xhci_hcd 0000:00:14.0: Queueing new dequeue state [ 2.545716] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 00000000235d3503 (0x269ef5000 dma), new deq ptr = 000000009e0c4408 (0x269ef5090 dma), new cycle = 1 [ 2.545721] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.545729] xhci_hcd 0000:00:14.0: Giveback URB 00000000e759d892, len = 0, expected = 10, status = -32 [ 2.545732] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1 [ 2.545737] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @269ef5090 [ 2.547082] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 5 ep 0 [ 2.547087] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring [ 2.547088] xhci_hcd 0000:00:14.0: Finding endpoint context [ 2.547088] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 2.547090] xhci_hcd 0000:00:14.0: New dequeue segment = 00000000235d3503 (virtual) [ 2.547090] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x269ef50c0 (DMA) [ 2.547091] xhci_hcd 0000:00:14.0: Queueing new dequeue state [ 2.547092] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 00000000235d3503 (0x269ef5000 dma), new deq ptr = 00000000711908f9 (0x269ef50c0 dma), new cycle = 1 [ 2.547099] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.547106] xhci_hcd 0000:00:14.0: Giveback URB 00000000e759d892, len = 0, expected = 10, status = -32 [ 2.547109] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1 [ 2.547114] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @269ef50c0 [ 2.548406] xhci_hcd 0000:00:14.0: Stalled endpoint for slot 5 ep 0 [ 2.548411] xhci_hcd 0000:00:14.0: Cleaning up stalled endpoint ring [ 2.548412] xhci_hcd 0000:00:14.0: Finding endpoint context [ 2.548412] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 2.548414] xhci_hcd 0000:00:14.0: New dequeue segment = 00000000235d3503 (virtual) [ 2.548414] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x269ef50f0 (DMA) [ 2.548415] xhci_hcd 0000:00:14.0: Queueing new dequeue state [ 2.548416] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 00000000235d3503 (0x269ef5000 dma), new deq ptr = 00000000ca576bbe (0x269ef50f0 dma), new cycle = 1 [ 2.548422] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.548429] xhci_hcd 0000:00:14.0: Giveback URB 00000000e759d892, len = 0, expected = 10, status = -32 [ 2.548433] xhci_hcd 0000:00:14.0: Ignoring reset ep completion code of 1 [ 2.548438] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @269ef50f0 [ 2.550286] usb 1-2.2: skipped 7 descriptors after interface [ 2.550288] usb 1-2.2: skipped 2 descriptors after interface [ 2.550289] usb 1-2.2: skipped 1 descriptor after endpoint [ 2.550290] usb 1-2.2: skipped 2 descriptors after interface [ 2.550291] usb 1-2.2: skipped 1 descriptor after endpoint [ 2.550291] usb 1-2.2: skipped 1 descriptor after interface [ 2.550562] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.550572] usb 1-2.2: default language 0x0409 [ 2.550885] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.551143] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.551451] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.551472] usb 1-2.2: udev 6, busnum 1, minor = 5 [ 2.551474] usb 1-2.2: New USB device found, idVendor=046d, idProduct=0857, bcdDevice= 4.56 [ 2.551475] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.551476] usb 1-2.2: Product: Logi Group Speakerphone [ 2.551477] usb 1-2.2: Manufacturer: Logitech [ 2.551625] usb 1-2.2: usb_probe_device [ 2.551627] usb 1-2.2: configuration #1 chosen from 1 choice [ 2.551645] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 5, new drop flags = 0x0, new add flags = 0x80 [ 2.551646] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 2.551650] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.552122] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 2.552132] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.554246] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 5 ep 6 [ 2.554266] xhci_hcd 0000:00:14.0: // Ding dong! [ 2.555112] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0) [ 2.555149] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1) [ 2.555160] usb 1-2.2: adding 1-2.2:1.2 (config #1, interface 2) [ 2.555170] usb 1-2.2: adding 1-2.2:1.3 (config #1, interface 3) [ 2.555183] usbhid 1-2.2:1.3: usb_probe_interface [ 2.555184] usbhid 1-2.2:1.3: usb_probe_interface - got id [ 2.555346] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.558211] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 2.558531] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 12.605126] input: Logitech Logi Group Speakerphone Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.3/0003:046D:0857.0004/input/input7 [ 12.665235] input: Logitech Logi Group Speakerphone as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.3/0003:046D:0857.0004/input/input8 [ 12.665339] input: Logitech Logi Group Speakerphone as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.3/0003:046D:0857.0004/input/input9 [ 12.665446] input: Logitech Logi Group Speakerphone as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.3/0003:046D:0857.0004/input/input10 [ 12.665539] usbhid 1-2.2:1.3: looking for a minor, starting at 0 [ 12.665663] hid-generic 0003:046D:0857.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logi Group Speakerphone] on usb-0000:00:14.0-2.2/input3 [ 12.706028] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.840729] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 12.857219] systemd[1]: Detected architecture x86-64. [ 12.877554] systemd[1]: Set hostname to . [ 13.009321] systemd[1]: Reached target System Time Synchronized. [ 13.009531] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.009571] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 13.009700] systemd[1]: Created slice System Slice. [ 13.009801] systemd[1]: Created slice system-postfix.slice. [ 13.009846] systemd[1]: Listening on udev Control Socket. [ 13.009920] systemd[1]: Listening on Journal Audit Socket. [ 13.026042] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.028295] lp: driver loaded but no devices found [ 13.034771] ppdev: user-space parallel port driver [ 13.038117] RPC: Registered named UNIX socket transport module. [ 13.038118] RPC: Registered udp transport module. [ 13.038118] RPC: Registered tcp transport module. [ 13.038119] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.044472] bpfilter: Loaded bpfilter_umh pid 344 [ 13.152836] Adding 2097148k swap on /swapfile. Priority:-2 extents:21 across:6070268k SSFS [ 13.178155] systemd-journald[320]: Received request to flush runtime journal from PID 1 [ 13.373412] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 13.380593] mc: Linux media interface: v0.10 [ 13.391088] videodev: Linux video capture interface: v2.00 [ 13.455317] audit: type=1400 audit(1578660599.769:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=550 comm="apparmor_parser" [ 13.455320] audit: type=1400 audit(1578660599.769:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=550 comm="apparmor_parser" [ 13.455322] audit: type=1400 audit(1578660599.769:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=550 comm="apparmor_parser" [ 13.464858] audit: type=1400 audit(1578660599.777:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=546 comm="apparmor_parser" [ 13.464861] audit: type=1400 audit(1578660599.777:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser" [ 13.464863] audit: type=1400 audit(1578660599.777:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=546 comm="apparmor_parser" [ 13.464865] audit: type=1400 audit(1578660599.777:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser" [ 13.465566] audit: type=1400 audit(1578660599.781:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=561 comm="apparmor_parser" [ 13.465569] audit: type=1400 audit(1578660599.781:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=561 comm="apparmor_parser" [ 13.466846] audit: type=1400 audit(1578660599.781:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=545 comm="apparmor_parser" [ 13.474158] uvcvideo 1-2.1:1.0: usb_probe_interface [ 13.474162] uvcvideo 1-2.1:1.0: usb_probe_interface - got id [ 13.475229] uvcvideo: Found UVC 1.00 device Logi Group Camera (046d:086e) [ 13.480382] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000a380570a [ 13.480672] uvcvideo 1-2.1:1.0: Entity type for entity Processing 3 was not initialized! [ 13.480674] uvcvideo 1-2.1:1.0: Entity type for entity Extension 6 was not initialized! [ 13.480676] uvcvideo 1-2.1:1.0: Entity type for entity Extension 8 was not initialized! [ 13.480677] uvcvideo 1-2.1:1.0: Entity type for entity Extension 9 was not initialized! [ 13.480679] uvcvideo 1-2.1:1.0: Entity type for entity Extension 10 was not initialized! [ 13.480680] uvcvideo 1-2.1:1.0: Entity type for entity Extension 11 was not initialized! [ 13.480682] uvcvideo 1-2.1:1.0: Entity type for entity Extension 12 was not initialized! [ 13.480683] uvcvideo 1-2.1:1.0: Entity type for entity Extension 13 was not initialized! [ 13.480685] uvcvideo 1-2.1:1.0: Entity type for entity Camera 1 was not initialized! [ 13.480767] input: Logi Group Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input13 [ 13.488435] usbcore: registered new interface driver uvcvideo [ 13.488436] USB Video Class driver (1.1.1) [ 13.532350] xhci_hcd 0000:00:14.0: Cancel URB 0000000071f175c8, dev 4, ep 0x81, starting at offset 0x26a9de000 [ 13.532355] xhci_hcd 0000:00:14.0: // Ding dong! [ 13.532367] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 4 ep 2 [ 13.532370] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x26a9de000 (dma). [ 13.532372] xhci_hcd 0000:00:14.0: Finding endpoint context [ 13.532373] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 13.532374] xhci_hcd 0000:00:14.0: New dequeue segment = 000000008c493cfc (virtual) [ 13.532375] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x26a9de010 (DMA) [ 13.532377] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 000000008c493cfc (0x26a9de000 dma), new deq ptr = 000000001b5b7222 (0x26a9de010 dma), new cycle = 1 [ 13.532378] xhci_hcd 0000:00:14.0: // Ding dong! [ 13.532390] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @26a9de010 [ 13.538163] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 13.538164] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 13.538165] RAPL PMU: hw unit of domain package 2^-14 Joules [ 13.538165] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 13.538166] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 13.538166] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 13.543467] i915 0000:00:02.0: Found 64MB of eDRAM [ 13.543492] checking generic (90000000 130000) vs hw (90000000 10000000) [ 13.543493] fb0: switching to inteldrmfb from VESA VGA [ 13.544745] Console: switching to colour dummy device 80x25 [ 13.548260] i915 0000:00:02.0: vgaarb: deactivate vga console [ 13.548803] cryptd: max_cpu_qlen set to 1000 [ 13.550344] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.550345] [drm] Driver supports precise vblank timestamp query. [ 13.552274] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.556896] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 13.585450] AVX2 version of gcm_enc/dec engaged. [ 13.585452] AES CTR mode by8 optimization enabled [ 13.596583] snd-usb-audio 1-2.2:1.0: usb_probe_interface [ 13.596587] snd-usb-audio 1-2.2:1.0: usb_probe_interface - got id [ 13.870232] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 13.896594] xhci_hcd 0000:00:14.0: Cancel URB 00000000a8e70b77, dev 2.1, ep 0x86, starting at offset 0x26a9a1000 [ 13.896598] xhci_hcd 0000:00:14.0: // Ding dong! [ 13.896611] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 3 ep 12 [ 13.896615] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x26a9a1000 (dma). [ 13.896616] xhci_hcd 0000:00:14.0: Finding endpoint context [ 13.896617] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 13.896619] xhci_hcd 0000:00:14.0: New dequeue segment = 00000000aeade618 (virtual) [ 13.896620] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x26a9a1010 (DMA) [ 13.896622] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 00000000aeade618 (0x26a9a1000 dma), new deq ptr = 000000008ab5126a (0x26a9a1010 dma), new cycle = 1 [ 13.896623] xhci_hcd 0000:00:14.0: // Ding dong! [ 13.896635] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @26a9a1010 [ 13.926510] [drm] failed to retrieve link info, disabling eDP [ 13.964789] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 13.966780] intel_rapl_common: Found RAPL domain package [ 13.966781] intel_rapl_common: Found RAPL domain core [ 13.966782] intel_rapl_common: Found RAPL domain uncore [ 13.966783] intel_rapl_common: Found RAPL domain dram [ 13.970452] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.970900] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 [ 13.971100] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 13.980850] xhci_hcd 0000:00:14.0: Cancel URB 0000000071f175c8, dev 4, ep 0x81, starting at offset 0x26a9de010 [ 13.980853] xhci_hcd 0000:00:14.0: // Ding dong! [ 13.980864] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 4 ep 2 [ 13.980867] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x26a9de010 (dma). [ 13.980868] xhci_hcd 0000:00:14.0: Finding endpoint context [ 13.980869] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 13.980870] xhci_hcd 0000:00:14.0: New dequeue segment = 000000008c493cfc (virtual) [ 13.980871] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x26a9de020 (DMA) [ 13.980873] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 000000008c493cfc (0x26a9de000 dma), new deq ptr = 00000000651a2653 (0x26a9de020 dma), new cycle = 1 [ 13.980874] xhci_hcd 0000:00:14.0: // Ding dong! [ 13.980886] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @26a9de020 [ 14.064273] i915 0000:00:02.0: DP-1: EDID is invalid: [ 14.064276] [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 14.064276] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.064277] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.064278] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.064278] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.064279] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.064280] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.064280] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.180667] fbcon: i915drmfb (fb0) is primary device [ 14.268239] Console: switching to colour frame buffer device 128x48 [ 14.290952] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 14.349349] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [ 14.349351] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.349352] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.349353] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.349353] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.349354] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12 [ 14.408879] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 14.408969] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 14.409058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 14.409140] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 14.409222] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 14.409304] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 14.409426] snd_hda_intel 0000:00:1f.3: device 8086:2068 is on the power_save blacklist, forcing power_save to 0 [ 14.864464] broken atomic modeset userspace detected, disabling atomic [ 15.712919] xhci_hcd 0000:00:14.0: Cancel URB 0000000071f175c8, dev 4, ep 0x81, starting at offset 0x26a9de020 [ 15.712921] xhci_hcd 0000:00:14.0: // Ding dong! [ 15.712933] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 4 ep 2 [ 15.712935] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x26a9de020 (dma). [ 15.712936] xhci_hcd 0000:00:14.0: Finding endpoint context [ 15.712937] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 15.712937] xhci_hcd 0000:00:14.0: New dequeue segment = 000000008c493cfc (virtual) [ 15.712938] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x26a9de030 (DMA) [ 15.712939] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 000000008c493cfc (0x26a9de000 dma), new deq ptr = 0000000058df62be (0x26a9de030 dma), new cycle = 1 [ 15.712940] xhci_hcd 0000:00:14.0: // Ding dong! [ 15.712976] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @26a9de030 [ 17.657459] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 18.748890] xhci_hcd 0000:00:14.0: Cancel URB 000000002c04dc32, dev 2.2, ep 0x0, starting at offset 0x269ef5340 [ 18.748897] xhci_hcd 0000:00:14.0: // Ding dong! [ 18.750962] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 18.750971] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef5340 (dma). [ 18.751003] usb 1-2.2: systemd-udevd timed out on ep0in len=0/255 [ 20.125367] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 20.125461] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 20.307103] kauditd_printk_skb: 28 callbacks suppressed [ 20.307104] audit: type=1400 audit(1578660606.621:40): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/snap/bin/" pid=1293 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 21.448835] xhci_hcd 0000:00:14.0: Cancel URB 0000000071f175c8, dev 4, ep 0x81, starting at offset 0x26a9de030 [ 21.448838] xhci_hcd 0000:00:14.0: // Ding dong! [ 21.448849] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 4 ep 2 [ 21.448851] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x26a9de030 (dma). [ 21.448852] xhci_hcd 0000:00:14.0: Finding endpoint context [ 21.448853] xhci_hcd 0000:00:14.0: Cycle state = 0x1 [ 21.448854] xhci_hcd 0000:00:14.0: New dequeue segment = 000000008c493cfc (virtual) [ 21.448855] xhci_hcd 0000:00:14.0: New dequeue pointer = 0x26a9de040 (DMA) [ 21.448856] xhci_hcd 0000:00:14.0: Set TR Deq Ptr cmd, new deq seg = 000000008c493cfc (0x26a9de000 dma), new deq ptr = 00000000ab6f14e1 (0x26a9de040 dma), new cycle = 1 [ 21.448857] xhci_hcd 0000:00:14.0: // Ding dong! [ 21.448973] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @26a9de040 [ 23.869021] xhci_hcd 0000:00:14.0: Cancel URB 00000000474e3a15, dev 2.2, ep 0x0, starting at offset 0x269ef5370 [ 23.869035] xhci_hcd 0000:00:14.0: // Ding dong! [ 23.871232] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 23.871247] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef5370 (dma). [ 23.871312] usb 1-2.2: systemd-udevd timed out on ep0in len=0/2 [ 28.988997] xhci_hcd 0000:00:14.0: Cancel URB 00000000c1c8d04f, dev 2.2, ep 0x0, starting at offset 0x269ef53a0 [ 28.989009] xhci_hcd 0000:00:14.0: // Ding dong! [ 28.991127] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 28.991143] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef53a0 (dma). [ 28.991207] usb 1-2.2: systemd-udevd timed out on ep0in len=0/255 [ 34.109090] xhci_hcd 0000:00:14.0: Cancel URB 00000000d5e74324, dev 2.2, ep 0x0, starting at offset 0x269ef53d0 [ 34.109102] xhci_hcd 0000:00:14.0: // Ding dong! [ 34.111131] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 34.111142] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef53d0 (dma). [ 34.111183] usb 1-2.2: systemd-udevd timed out on ep0in len=0/2 [ 34.111314] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 5, new drop flags = 0x0, new add flags = 0x20 [ 34.111323] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 34.111334] xhci_hcd 0000:00:14.0: // Ding dong! [ 34.111603] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 39.228837] xhci_hcd 0000:00:14.0: Cancel URB 000000000c54ce93, dev 2.2, ep 0x0, starting at offset 0x269ef5400 [ 39.228851] xhci_hcd 0000:00:14.0: // Ding dong! [ 39.231054] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 39.231069] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef5400 (dma). [ 39.231129] usb 1-2.2: systemd-udevd timed out on ep0out len=0/0 [ 39.231145] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000aa06d3e8 [ 39.231192] xhci_hcd 0000:00:14.0: drop ep 0x82, slot id 5, new drop flags = 0x20, new add flags = 0x0 [ 39.231203] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 39.231215] xhci_hcd 0000:00:14.0: // Ding dong! [ 39.231687] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 39.231717] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 44.348793] xhci_hcd 0000:00:14.0: Cancel URB 000000000c54ce93, dev 2.2, ep 0x0, starting at offset 0x269ef5420 [ 44.348805] xhci_hcd 0000:00:14.0: // Ding dong! [ 44.350953] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 44.350968] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef5420 (dma). [ 44.351030] usb 1-2.2: systemd-udevd timed out on ep0out len=0/0 [ 44.351045] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 44.351301] xhci_hcd 0000:00:14.0: add ep 0x1, slot id 5, new drop flags = 0x0, new add flags = 0x5 [ 44.351309] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 44.351319] xhci_hcd 0000:00:14.0: // Ding dong! [ 44.351607] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 49.468738] xhci_hcd 0000:00:14.0: Cancel URB 00000000093d6c08, dev 2.2, ep 0x0, starting at offset 0x269ef5440 [ 49.468752] xhci_hcd 0000:00:14.0: // Ding dong! [ 49.470853] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 5 ep 0 [ 49.470869] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x269ef5440 (dma). [ 49.470931] usb 1-2.2: systemd-udevd timed out on ep0out len=0/0 [ 49.470947] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000aa06d3e8 [ 49.470995] xhci_hcd 0000:00:14.0: drop ep 0x1, slot id 5, new drop flags = 0x4, new add flags = 0x0 [ 49.471006] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8 [ 49.471017] xhci_hcd 0000:00:14.0: // Ding dong! [ 49.471334] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 49.471367] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000aa06d3e8