[ 0.000000] Linux version 5.0.0-27-generic (buildd@lgw01-amd64-016) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #28-Ubuntu SMP Tue Aug 20 19:53:07 UTC 2019 (Ubuntu 5.0.0-27.28-generic 5.0.21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-27-generic root=UUID=4b8b9e96-fd23-4ade-bcd2-19b9795bd4e6 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dbd50fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbd51000-0x00000000dbe95fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbe96000-0x00000000dc016fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc017000-0x00000000dc429fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dc42a000-0x00000000dcfbbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dcfbc000-0x00000000dd060fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dd061000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xdc3a6000 ACPI=0xdc3a6000 SMBIOS=0xdcea7000 MEMATTR=0xd815a698 ESRT=0xd815bf98 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7A40/B450I GAMING PLUS AC (MS-7A40), BIOS A.91 08/19/2019 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x81f380 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000DC7C0000 mask FFFFFFFF0000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000820000000 aka 33280M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3583M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdc7c0000-0xdc7cffff] usable ==> reserved [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000d815bf98 to 0x00000000d815bfd0. [ 0.000000] check: Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x569401000, 0x569401fff] PGTABLE [ 0.000000] BRK [0x569402000, 0x569402fff] PGTABLE [ 0.000000] BRK [0x569403000, 0x569403fff] PGTABLE [ 0.000000] BRK [0x569404000, 0x569404fff] PGTABLE [ 0.000000] BRK [0x569405000, 0x569405fff] PGTABLE [ 0.000000] BRK [0x569406000, 0x569406fff] PGTABLE [ 0.000000] BRK [0x569407000, 0x569407fff] PGTABLE [ 0.000000] BRK [0x569408000, 0x569408fff] PGTABLE [ 0.000000] BRK [0x569409000, 0x569409fff] PGTABLE [ 0.000000] BRK [0x56940a000, 0x56940afff] PGTABLE [ 0.000000] BRK [0x56940b000, 0x56940bfff] PGTABLE [ 0.000000] BRK [0x56940c000, 0x56940cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3315d000-0x358a5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DC3A6000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DC3A6098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DC3ADA50 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DC3A61E8 007866 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DC412E00 000040 [ 0.000000] ACPI: APIC 0x00000000DC3ADB68 00015E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DC3ADCC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DC3ADD10 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DC3ADDB0 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009) [ 0.000000] ACPI: SSDT 0x00000000DC3ADE78 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 0.000000] ACPI: SSDT 0x00000000DC3B6B10 0032E2 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DC3B9DF8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DC3B9E38 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x00000000DC3B9E70 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: IVRS 0x00000000DC3B9EB8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: PCCT 0x00000000DC3B9F88 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000) [ 0.000000] ACPI: CRAT 0x00000000DC3B9FF8 001058 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DC3BB050 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: BGRT 0x00000000DC3BB080 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DC3BB0B8 001D4A (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DC3BCE08 0000BF (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000DC3BCEC8 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x81f355000-0x81f37ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009d7ffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.000000] node 0: [mem 0x000000000a20c000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000dbd50fff] [ 0.000000] node 0: [mem 0x00000000dbe96000-0x00000000dc016fff] [ 0.000000] node 0: [mem 0x00000000dd061000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Zeroed struct page in unavailable ranges: 9372 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff] [ 0.000000] On node 0 totalpages: 8376036 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 33 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14128 pages used for memmap [ 0.000000] DMA32 zone: 904133 pages, LIFO batch:63 [ 0.000000] Normal zone: 116686 pages used for memmap [ 0.000000] Normal zone: 7467904 pages, LIFO batch:63 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbd51000-0xdbe95fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc017000-0xdc429fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc42a000-0xdcfbbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdcfbc000-0xdd060fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8245125 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-27-generic root=UUID=4b8b9e96-fd23-4ade-bcd2-19b9795bd4e6 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32738804K/33504144K available (14339K kernel code, 2335K rwdata, 4304K rodata, 2576K init, 5204K bss, 765340K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.000000] ftrace: allocating 41580 entries in 163 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty0] enabled [ 0.000000] ACPI: Core revision 20181213 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] Switched APIC routing to physical flat. [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: PIT calibration matches HPET. 1 loops [ 0.028000] tsc: Detected 3599.897 MHz processor [ 0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e3f25897b, max_idle_ns: 440795357225 ns [ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.79 BogoMIPS (lpj=14399588) [ 0.000010] pid_max: default: 32768 minimum: 301 [ 0.004050] LSM: Security Framework initializing [ 0.004058] Yama: becoming mindful. [ 0.004086] AppArmor: AppArmor initialized [ 0.007190] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.008989] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.009047] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.009093] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.009279] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.009367] LVT offset 2 assigned for vector 0xf4 [ 0.009381] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.009381] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.009382] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.009383] Spectre V2 : Mitigation: Full AMD retpoline [ 0.009383] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.009388] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.009389] Spectre V2 : User space: Mitigation: STIBP always-on protection [ 0.009389] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.009558] Freeing SMP alternatives memory: 36K [ 0.016005] smpboot: CPU0: AMD Ryzen 5 3600 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0) [ 0.016005] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.016005] ... version: 0 [ 0.016005] ... bit width: 48 [ 0.016005] ... generic registers: 6 [ 0.016005] ... value mask: 0000ffffffffffff [ 0.016005] ... max period: 00007fffffffffff [ 0.016005] ... fixed-purpose events: 0 [ 0.016005] ... event mask: 000000000000003f [ 0.016005] rcu: Hierarchical SRCU implementation. [ 0.016005] random: crng done (trusting CPU's manufacturer) [ 0.016005] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.016005] smp: Bringing up secondary CPUs ... [ 0.016005] x86: Booting SMP configuration: [ 0.016005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 [ 0.026228] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.026228] #7 #8 #9 #10 #11 [ 0.038214] smp: Brought up 1 node, 12 CPUs [ 0.038214] smpboot: Max logical packages: 3 [ 0.038214] smpboot: Total of 12 processors activated (86397.52 BogoMIPS) [ 0.040461] devtmpfs: initialized [ 0.040461] x86/mm: Memory block size: 128MB [ 0.041409] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes) [ 0.041409] PM: Registering ACPI NVS region [mem 0xdc017000-0xdc429fff] (4272128 bytes) [ 0.041409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.041409] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 0.041409] pinctrl core: initialized pinctrl subsystem [ 0.041409] RTC time: 03:12:26, date: 2019-09-05 [ 0.041409] NET: Registered protocol family 16 [ 0.041409] audit: initializing netlink subsys (disabled) [ 0.041409] audit: type=2000 audit(1567653146.068:1): state=initialized audit_enabled=0 res=1 [ 0.041409] EISA bus registered [ 0.041409] cpuidle: using governor ladder [ 0.041409] cpuidle: using governor menu [ 0.041409] Detected 1 PCC Subspaces [ 0.041409] Registering PCC driver as Mailbox controller [ 0.041409] ACPI: bus type PCI registered [ 0.041409] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.041409] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.041409] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.041409] PCI: Using configuration type 1 for base access [ 0.044039] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.044039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.044082] ACPI: Added _OSI(Module Device) [ 0.044082] ACPI: Added _OSI(Processor Device) [ 0.044083] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.044083] ACPI: Added _OSI(Processor Aggregator Device) [ 0.044084] ACPI: Added _OSI(Linux-Dell-Video) [ 0.044084] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.044084] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.049383] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.052565] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.054967] ACPI: Interpreter enabled [ 0.054979] ACPI: (supports S0 S3 S4 S5) [ 0.054980] ACPI: Using IOAPIC for interrupt routing [ 0.055229] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.055446] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.061290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.061293] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.061429] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR] [ 0.061556] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.061563] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.061834] PCI host bridge to bus 0000:00 [ 0.061835] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.061836] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.061836] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.061837] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.061837] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.061838] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.061839] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.061839] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.061840] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.061845] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 [ 0.061929] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 [ 0.062023] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 [ 0.062092] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400 [ 0.062182] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.062288] pci 0000:00:01.3: [1022:1483] type 01 class 0x060400 [ 0.062323] pci 0000:00:01.3: enabling Extended Tags [ 0.062378] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.062476] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 [ 0.062548] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 [ 0.062614] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 [ 0.062691] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.062786] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 [ 0.062859] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 [ 0.062932] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 [ 0.062997] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 [ 0.063022] pci 0000:00:07.1: enabling Extended Tags [ 0.063054] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.063122] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 [ 0.063189] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 [ 0.063215] pci 0000:00:08.1: enabling Extended Tags [ 0.063251] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.063323] pci 0000:00:08.2: [1022:1484] type 01 class 0x060400 [ 0.063350] pci 0000:00:08.2: enabling Extended Tags [ 0.063385] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.063450] pci 0000:00:08.3: [1022:1484] type 01 class 0x060400 [ 0.063477] pci 0000:00:08.3: enabling Extended Tags [ 0.063512] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold [ 0.063597] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.064014] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.064134] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 [ 0.064179] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 [ 0.064224] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 [ 0.064270] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 [ 0.064315] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 [ 0.064361] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 [ 0.064407] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 [ 0.064453] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 [ 0.064563] pci 0000:01:00.0: [1987:5012] type 00 class 0x010802 [ 0.064632] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] [ 0.065094] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.065099] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.065154] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330 [ 0.065180] pci 0000:03:00.0: reg 0x10: [mem 0xfcaa0000-0xfcaa7fff 64bit] [ 0.065224] pci 0000:03:00.0: enabling Extended Tags [ 0.065280] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.065356] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601 [ 0.065412] pci 0000:03:00.1: reg 0x24: [mem 0xfca80000-0xfca9ffff] [ 0.065420] pci 0000:03:00.1: reg 0x30: [mem 0xfca00000-0xfca7ffff pref] [ 0.065427] pci 0000:03:00.1: enabling Extended Tags [ 0.065471] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 0.065524] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400 [ 0.065571] pci 0000:03:00.2: enabling Extended Tags [ 0.065619] pci 0000:03:00.2: PME# supported from D3hot D3cold [ 0.065714] pci 0000:00:01.3: PCI bridge to [bus 03-28] [ 0.065718] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.065720] pci 0000:00:01.3: bridge window [mem 0xfc800000-0xfcafffff] [ 0.065808] pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400 [ 0.065860] pci 0000:20:00.0: enabling Extended Tags [ 0.065919] pci 0000:20:00.0: PME# supported from D3hot D3cold [ 0.065993] pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400 [ 0.066045] pci 0000:20:01.0: enabling Extended Tags [ 0.066105] pci 0000:20:01.0: PME# supported from D3hot D3cold [ 0.066182] pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400 [ 0.066233] pci 0000:20:04.0: enabling Extended Tags [ 0.066293] pci 0000:20:04.0: PME# supported from D3hot D3cold [ 0.066367] pci 0000:20:05.0: [1022:43c7] type 01 class 0x060400 [ 0.066418] pci 0000:20:05.0: enabling Extended Tags [ 0.066478] pci 0000:20:05.0: PME# supported from D3hot D3cold [ 0.066555] pci 0000:20:06.0: [1022:43c7] type 01 class 0x060400 [ 0.066607] pci 0000:20:06.0: enabling Extended Tags [ 0.066666] pci 0000:20:06.0: PME# supported from D3hot D3cold [ 0.066742] pci 0000:20:07.0: [1022:43c7] type 01 class 0x060400 [ 0.066793] pci 0000:20:07.0: enabling Extended Tags [ 0.066852] pci 0000:20:07.0: PME# supported from D3hot D3cold [ 0.066944] pci 0000:03:00.2: PCI bridge to [bus 20-28] [ 0.066949] pci 0000:03:00.2: bridge window [io 0xf000-0xffff] [ 0.066951] pci 0000:03:00.2: bridge window [mem 0xfc800000-0xfc9fffff] [ 0.066995] pci 0000:20:00.0: PCI bridge to [bus 21] [ 0.067041] pci 0000:20:01.0: PCI bridge to [bus 22] [ 0.067114] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000 [ 0.067159] pci 0000:25:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.067199] pci 0000:25:00.0: reg 0x18: [mem 0xfc904000-0xfc904fff 64bit] [ 0.067223] pci 0000:25:00.0: reg 0x20: [mem 0xfc900000-0xfc903fff 64bit] [ 0.067376] pci 0000:25:00.0: supports D1 D2 [ 0.067376] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.067563] pci 0000:20:04.0: PCI bridge to [bus 25] [ 0.067568] pci 0000:20:04.0: bridge window [io 0xf000-0xffff] [ 0.067571] pci 0000:20:04.0: bridge window [mem 0xfc900000-0xfc9fffff] [ 0.067639] pci 0000:26:00.0: [8086:24fb] type 00 class 0x028000 [ 0.067703] pci 0000:26:00.0: reg 0x10: [mem 0xfc800000-0xfc801fff 64bit] [ 0.067935] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold [ 0.068141] pci 0000:20:05.0: PCI bridge to [bus 26] [ 0.068148] pci 0000:20:05.0: bridge window [mem 0xfc800000-0xfc8fffff] [ 0.068187] pci 0000:20:06.0: PCI bridge to [bus 27] [ 0.068232] pci 0000:20:07.0: PCI bridge to [bus 28] [ 0.068317] pci 0000:29:00.0: [1022:1470] type 01 class 0x060400 [ 0.068338] pci 0000:29:00.0: reg 0x10: [mem 0xfcc00000-0xfcc03fff] [ 0.068417] pci 0000:29:00.0: PME# supported from D0 D3hot D3cold [ 0.068513] pci 0000:00:03.1: PCI bridge to [bus 29-2b] [ 0.068516] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.068518] pci 0000:00:03.1: bridge window [mem 0xfcb00000-0xfccfffff] [ 0.068521] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.068557] pci 0000:2a:00.0: [1022:1471] type 01 class 0x060400 [ 0.068650] pci 0000:2a:00.0: PME# supported from D0 D3hot D3cold [ 0.068725] pci 0000:29:00.0: PCI bridge to [bus 2a-2b] [ 0.068730] pci 0000:29:00.0: bridge window [io 0xe000-0xefff] [ 0.068732] pci 0000:29:00.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.068736] pci 0000:29:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.068772] pci 0000:2b:00.0: [1002:687f] type 00 class 0x030000 [ 0.068800] pci 0000:2b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.068810] pci 0000:2b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.068818] pci 0000:2b:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.068825] pci 0000:2b:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff] [ 0.068832] pci 0000:2b:00.0: reg 0x30: [mem 0xfcb80000-0xfcb9ffff pref] [ 0.068845] pci 0000:2b:00.0: BAR 0: assigned to efifb [ 0.068906] pci 0000:2b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.068980] pci 0000:2b:00.1: [1002:aaf8] type 00 class 0x040300 [ 0.068999] pci 0000:2b:00.1: reg 0x10: [mem 0xfcba0000-0xfcba3fff] [ 0.069091] pci 0000:2b:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.069177] pci 0000:2a:00.0: PCI bridge to [bus 2b] [ 0.069182] pci 0000:2a:00.0: bridge window [io 0xe000-0xefff] [ 0.069184] pci 0000:2a:00.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.069188] pci 0000:2a:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.069233] pci 0000:2c:00.0: [1022:148a] type 00 class 0x130000 [ 0.069266] pci 0000:2c:00.0: enabling Extended Tags [ 0.069353] pci 0000:00:07.1: PCI bridge to [bus 2c] [ 0.069403] pci 0000:2d:00.0: [1022:1485] type 00 class 0x130000 [ 0.069442] pci 0000:2d:00.0: enabling Extended Tags [ 0.069528] pci 0000:2d:00.1: [1022:1486] type 00 class 0x108000 [ 0.069548] pci 0000:2d:00.1: reg 0x18: [mem 0xfc600000-0xfc6fffff] [ 0.069559] pci 0000:2d:00.1: reg 0x24: [mem 0xfc708000-0xfc709fff] [ 0.069567] pci 0000:2d:00.1: enabling Extended Tags [ 0.069644] pci 0000:2d:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.069661] pci 0000:2d:00.3: reg 0x10: [mem 0xfc500000-0xfc5fffff 64bit] [ 0.069691] pci 0000:2d:00.3: enabling Extended Tags [ 0.069731] pci 0000:2d:00.3: PME# supported from D0 D3hot D3cold [ 0.069770] pci 0000:2d:00.4: [1022:1487] type 00 class 0x040300 [ 0.069783] pci 0000:2d:00.4: reg 0x10: [mem 0xfc700000-0xfc707fff] [ 0.069809] pci 0000:2d:00.4: enabling Extended Tags [ 0.069846] pci 0000:2d:00.4: PME# supported from D0 D3hot D3cold [ 0.069906] pci 0000:00:08.1: PCI bridge to [bus 2d] [ 0.069910] pci 0000:00:08.1: bridge window [mem 0xfc500000-0xfc7fffff] [ 0.069949] pci 0000:30:00.0: [1022:7901] type 00 class 0x010601 [ 0.069991] pci 0000:30:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff] [ 0.070001] pci 0000:30:00.0: enabling Extended Tags [ 0.070050] pci 0000:30:00.0: PME# supported from D3hot D3cold [ 0.070119] pci 0000:00:08.2: PCI bridge to [bus 30] [ 0.070123] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.070161] pci 0000:31:00.0: [1022:7901] type 00 class 0x010601 [ 0.070203] pci 0000:31:00.0: reg 0x24: [mem 0xfcd00000-0xfcd007ff] [ 0.070212] pci 0000:31:00.0: enabling Extended Tags [ 0.070261] pci 0000:31:00.0: PME# supported from D3hot D3cold [ 0.070329] pci 0000:00:08.3: PCI bridge to [bus 31] [ 0.070333] pci 0000:00:08.3: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.070550] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070595] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070631] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070676] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070716] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070749] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070782] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.070814] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.072118] SCSI subsystem initialized [ 0.072133] libata version 3.00 loaded. [ 0.072133] pci 0000:2b:00.0: vgaarb: setting as boot VGA device [ 0.072133] pci 0000:2b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.072133] pci 0000:2b:00.0: vgaarb: bridge control possible [ 0.072133] vgaarb: loaded [ 0.072133] ACPI: bus type USB registered [ 0.072133] usbcore: registered new interface driver usbfs [ 0.072133] usbcore: registered new interface driver hub [ 0.072133] usbcore: registered new device driver usb [ 0.072133] pps_core: LinuxPPS API ver. 1 registered [ 0.072133] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.072133] PTP clock support registered [ 0.072133] EDAC MC: Ver: 3.0.0 [ 0.072137] Registered efivars operations [ 0.084125] PCI: Using ACPI for IRQ routing [ 0.084125] PCI: pci_cache_line_size set to 64 bytes [ 0.084125] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.084125] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff] [ 0.084125] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.084125] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.084125] e820: reserve RAM buffer [mem 0xdbd51000-0xdbffffff] [ 0.084125] e820: reserve RAM buffer [mem 0xdc017000-0xdfffffff] [ 0.084125] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.084125] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff] [ 0.084161] NetLabel: Initializing [ 0.084161] NetLabel: domain hash size = 128 [ 0.084161] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.084169] NetLabel: unlabeled traffic allowed by default [ 0.084176] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.084176] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.088008] clocksource: Switched to clocksource tsc-early [ 0.095604] VFS: Disk quotas dquot_6.6.0 [ 0.095617] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.095699] AppArmor: AppArmor Filesystem Enabled [ 0.095710] pnp: PnP ACPI init [ 0.095779] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.095781] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.095842] system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved [ 0.095844] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.095871] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.096011] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.096012] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.096016] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.096016] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.096018] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.096203] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.096204] system 00:04: [io 0x040b] has been reserved [ 0.096205] system 00:04: [io 0x04d6] has been reserved [ 0.096206] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.096207] system 00:04: [io 0x0c14] has been reserved [ 0.096207] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.096208] system 00:04: [io 0x0c52] has been reserved [ 0.096209] system 00:04: [io 0x0c6c] has been reserved [ 0.096209] system 00:04: [io 0x0c6f] has been reserved [ 0.096210] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.096211] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.096211] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.096212] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.096213] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.096213] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.096214] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.096214] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.096215] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.096216] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.096217] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.096218] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.096219] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.096220] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.096221] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.096221] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.096222] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.096224] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.096533] pnp: PnP ACPI: found 5 devices [ 0.101986] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.102079] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.102082] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.102087] pci 0000:20:00.0: PCI bridge to [bus 21] [ 0.102098] pci 0000:20:01.0: PCI bridge to [bus 22] [ 0.102108] pci 0000:20:04.0: PCI bridge to [bus 25] [ 0.102110] pci 0000:20:04.0: bridge window [io 0xf000-0xffff] [ 0.102114] pci 0000:20:04.0: bridge window [mem 0xfc900000-0xfc9fffff] [ 0.102121] pci 0000:20:05.0: PCI bridge to [bus 26] [ 0.102125] pci 0000:20:05.0: bridge window [mem 0xfc800000-0xfc8fffff] [ 0.102133] pci 0000:20:06.0: PCI bridge to [bus 27] [ 0.102143] pci 0000:20:07.0: PCI bridge to [bus 28] [ 0.102154] pci 0000:03:00.2: PCI bridge to [bus 20-28] [ 0.102156] pci 0000:03:00.2: bridge window [io 0xf000-0xffff] [ 0.102159] pci 0000:03:00.2: bridge window [mem 0xfc800000-0xfc9fffff] [ 0.102166] pci 0000:00:01.3: PCI bridge to [bus 03-28] [ 0.102167] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.102170] pci 0000:00:01.3: bridge window [mem 0xfc800000-0xfcafffff] [ 0.102175] pci 0000:2a:00.0: PCI bridge to [bus 2b] [ 0.102176] pci 0000:2a:00.0: bridge window [io 0xe000-0xefff] [ 0.102180] pci 0000:2a:00.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.102182] pci 0000:2a:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.102186] pci 0000:29:00.0: PCI bridge to [bus 2a-2b] [ 0.102188] pci 0000:29:00.0: bridge window [io 0xe000-0xefff] [ 0.102191] pci 0000:29:00.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.102193] pci 0000:29:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.102197] pci 0000:00:03.1: PCI bridge to [bus 29-2b] [ 0.102198] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.102201] pci 0000:00:03.1: bridge window [mem 0xfcb00000-0xfccfffff] [ 0.102202] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.102205] pci 0000:00:07.1: PCI bridge to [bus 2c] [ 0.102211] pci 0000:00:08.1: PCI bridge to [bus 2d] [ 0.102214] pci 0000:00:08.1: bridge window [mem 0xfc500000-0xfc7fffff] [ 0.102218] pci 0000:00:08.2: PCI bridge to [bus 30] [ 0.102220] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.102224] pci 0000:00:08.3: PCI bridge to [bus 31] [ 0.102226] pci 0000:00:08.3: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.102231] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.102231] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.102232] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.102233] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.102233] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.102234] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.102234] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.102235] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.102236] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.102236] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.102237] pci_bus 0000:03: resource 1 [mem 0xfc800000-0xfcafffff] [ 0.102237] pci_bus 0000:20: resource 0 [io 0xf000-0xffff] [ 0.102238] pci_bus 0000:20: resource 1 [mem 0xfc800000-0xfc9fffff] [ 0.102239] pci_bus 0000:25: resource 0 [io 0xf000-0xffff] [ 0.102239] pci_bus 0000:25: resource 1 [mem 0xfc900000-0xfc9fffff] [ 0.102240] pci_bus 0000:26: resource 1 [mem 0xfc800000-0xfc8fffff] [ 0.102240] pci_bus 0000:29: resource 0 [io 0xe000-0xefff] [ 0.102241] pci_bus 0000:29: resource 1 [mem 0xfcb00000-0xfccfffff] [ 0.102241] pci_bus 0000:29: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.102242] pci_bus 0000:2a: resource 0 [io 0xe000-0xefff] [ 0.102243] pci_bus 0000:2a: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 0.102243] pci_bus 0000:2a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.102244] pci_bus 0000:2b: resource 0 [io 0xe000-0xefff] [ 0.102244] pci_bus 0000:2b: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 0.102245] pci_bus 0000:2b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.102245] pci_bus 0000:2d: resource 1 [mem 0xfc500000-0xfc7fffff] [ 0.102246] pci_bus 0000:30: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.102246] pci_bus 0000:31: resource 1 [mem 0xfcd00000-0xfcdfffff] [ 0.102311] NET: Registered protocol family 2 [ 0.102412] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.102470] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.102696] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.102785] TCP: Hash tables configured (established 262144 bind 65536) [ 0.102829] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.102885] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.103009] NET: Registered protocol family 1 [ 0.103011] NET: Registered protocol family 44 [ 0.103143] PCI: CLS mismatch (64 != 548), using 64 bytes [ 0.103150] pci 0000:2b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.103154] pci 0000:2b:00.1: Linked as a consumer to 0000:2b:00.0 [ 0.103297] Unpacking initramfs... [ 0.463307] Freeing initrd memory: 40228K [ 0.463324] AMD-Vi: IOMMU performance counters supported [ 0.463646] iommu: Adding device 0000:00:01.0 to group 0 [ 0.463783] iommu: Adding device 0000:00:01.1 to group 1 [ 0.463931] iommu: Adding device 0000:00:01.3 to group 2 [ 0.464061] iommu: Adding device 0000:00:02.0 to group 3 [ 0.464202] iommu: Adding device 0000:00:03.0 to group 4 [ 0.464342] iommu: Adding device 0000:00:03.1 to group 5 [ 0.464483] iommu: Adding device 0000:00:04.0 to group 6 [ 0.464622] iommu: Adding device 0000:00:05.0 to group 7 [ 0.464753] iommu: Adding device 0000:00:07.0 to group 8 [ 0.464775] iommu: Adding device 0000:00:07.1 to group 8 [ 0.464929] iommu: Adding device 0000:00:08.0 to group 9 [ 0.464953] iommu: Adding device 0000:00:08.1 to group 9 [ 0.464975] iommu: Adding device 0000:00:08.2 to group 9 [ 0.464996] iommu: Adding device 0000:00:08.3 to group 9 [ 0.465122] iommu: Adding device 0000:00:14.0 to group 10 [ 0.465140] iommu: Adding device 0000:00:14.3 to group 10 [ 0.465299] iommu: Adding device 0000:00:18.0 to group 11 [ 0.465317] iommu: Adding device 0000:00:18.1 to group 11 [ 0.465334] iommu: Adding device 0000:00:18.2 to group 11 [ 0.465351] iommu: Adding device 0000:00:18.3 to group 11 [ 0.465368] iommu: Adding device 0000:00:18.4 to group 11 [ 0.465385] iommu: Adding device 0000:00:18.5 to group 11 [ 0.465402] iommu: Adding device 0000:00:18.6 to group 11 [ 0.465420] iommu: Adding device 0000:00:18.7 to group 11 [ 0.465560] iommu: Adding device 0000:01:00.0 to group 12 [ 0.465717] iommu: Adding device 0000:03:00.0 to group 13 [ 0.465752] iommu: Adding device 0000:03:00.1 to group 13 [ 0.465779] iommu: Adding device 0000:03:00.2 to group 13 [ 0.465797] iommu: Adding device 0000:20:00.0 to group 13 [ 0.465816] iommu: Adding device 0000:20:01.0 to group 13 [ 0.465834] iommu: Adding device 0000:20:04.0 to group 13 [ 0.465851] iommu: Adding device 0000:20:05.0 to group 13 [ 0.465869] iommu: Adding device 0000:20:06.0 to group 13 [ 0.465886] iommu: Adding device 0000:20:07.0 to group 13 [ 0.465914] iommu: Adding device 0000:25:00.0 to group 13 [ 0.465941] iommu: Adding device 0000:26:00.0 to group 13 [ 0.466076] iommu: Adding device 0000:29:00.0 to group 14 [ 0.466224] iommu: Adding device 0000:2a:00.0 to group 15 [ 0.466412] iommu: Adding device 0000:2b:00.0 to group 16 [ 0.466475] iommu: Using direct mapping for device 0000:2b:00.0 [ 0.466556] iommu: Adding device 0000:2b:00.1 to group 17 [ 0.466576] iommu: Adding device 0000:2c:00.0 to group 8 [ 0.466595] iommu: Adding device 0000:2d:00.0 to group 9 [ 0.466612] iommu: Adding device 0000:2d:00.1 to group 9 [ 0.466630] iommu: Adding device 0000:2d:00.3 to group 9 [ 0.466647] iommu: Adding device 0000:2d:00.4 to group 9 [ 0.466667] iommu: Adding device 0000:30:00.0 to group 9 [ 0.466686] iommu: Adding device 0000:31:00.0 to group 9 [ 0.466856] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.466857] AMD-Vi: Extended features (0x58f77ef22294ade): [ 0.466857] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.466859] AMD-Vi: Interrupt remapping enabled [ 0.466859] AMD-Vi: Virtual APIC enabled [ 0.466859] AMD-Vi: X2APIC enabled [ 0.466968] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.467628] amd_uncore: AMD NB counters detected [ 0.467632] amd_uncore: AMD LLC counters detected [ 0.467957] LVT offset 0 assigned for vector 0x400 [ 0.468127] perf: AMD IBS detected (0x000003ff) [ 0.468130] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.468171] check: Scanning for low memory corruption every 60 seconds [ 0.469305] Initialise system trusted keyrings [ 0.469313] Key type blacklist registered [ 0.469347] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.470128] zbud: loaded [ 0.470405] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.470554] fuse init (API version 7.28) [ 0.488712] Key type asymmetric registered [ 0.488713] Asymmetric key parser 'x509' registered [ 0.488718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.488747] io scheduler mq-deadline registered [ 0.489648] aer 0000:00:01.1:pcie002: AER enabled with IRQ 26 [ 0.489678] dpc 0000:00:01.1:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 0.489836] aer 0000:00:01.3:pcie002: AER enabled with IRQ 27 [ 0.489875] dpc 0000:00:01.3:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 0.490014] aer 0000:00:03.1:pcie002: AER enabled with IRQ 28 [ 0.490044] dpc 0000:00:03.1:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 0.491279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.491322] efifb: probing for efifb [ 0.491328] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k [ 0.491329] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.491329] efifb: scrolling: redraw [ 0.491330] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.491398] Console: switching to colour frame buffer device 240x67 [ 0.491414] fb0: EFI VGA frame buffer device [ 0.491484] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.491490] ACPI: Power Button [PWRB] [ 0.491508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.491517] ACPI: Power Button [PWRF] [ 0.492322] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.512870] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.513774] Linux agpgart interface v0.103 [ 0.516416] loop: module loaded [ 0.516533] libphy: Fixed MDIO Bus: probed [ 0.516534] tun: Universal TUN/TAP device driver, 1.6 [ 0.516550] PPP generic driver version 2.4.2 [ 0.516570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.516571] ehci-pci: EHCI PCI platform driver [ 0.516576] ehci-platform: EHCI generic platform driver [ 0.516580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.516580] ohci-pci: OHCI PCI platform driver [ 0.516586] ohci-platform: OHCI generic platform driver [ 0.516589] uhci_hcd: USB Universal Host Controller Interface driver [ 0.516638] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.516641] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 0.571940] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 0.572073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 0.572074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.572074] usb usb1: Product: xHCI Host Controller [ 0.572075] usb usb1: Manufacturer: Linux 5.0.0-27-generic xhci-hcd [ 0.572075] usb usb1: SerialNumber: 0000:03:00.0 [ 0.572148] hub 1-0:1.0: USB hub found [ 0.572160] hub 1-0:1.0: 10 ports detected [ 0.572337] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.572339] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 0.572340] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed [ 0.572376] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.572383] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 0.572384] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.572384] usb usb2: Product: xHCI Host Controller [ 0.572385] usb usb2: Manufacturer: Linux 5.0.0-27-generic xhci-hcd [ 0.572385] usb usb2: SerialNumber: 0000:03:00.0 [ 0.572440] hub 2-0:1.0: USB hub found [ 0.572452] hub 2-0:1.0: 4 ports detected [ 0.572562] xhci_hcd 0000:2d:00.3: xHCI Host Controller [ 0.572564] xhci_hcd 0000:2d:00.3: new USB bus registered, assigned bus number 3 [ 0.572665] xhci_hcd 0000:2d:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 0.572919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 0.572920] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.572920] usb usb3: Product: xHCI Host Controller [ 0.572921] usb usb3: Manufacturer: Linux 5.0.0-27-generic xhci-hcd [ 0.572921] usb usb3: SerialNumber: 0000:2d:00.3 [ 0.572979] hub 3-0:1.0: USB hub found [ 0.572983] hub 3-0:1.0: 4 ports detected [ 0.573072] xhci_hcd 0000:2d:00.3: xHCI Host Controller [ 0.573074] xhci_hcd 0000:2d:00.3: new USB bus registered, assigned bus number 4 [ 0.573075] xhci_hcd 0000:2d:00.3: Host supports USB 3.10 Enhanced SuperSpeed [ 0.573081] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.573088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 0.573089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.573089] usb usb4: Product: xHCI Host Controller [ 0.573090] usb usb4: Manufacturer: Linux 5.0.0-27-generic xhci-hcd [ 0.573090] usb usb4: SerialNumber: 0000:2d:00.3 [ 0.573146] hub 4-0:1.0: USB hub found [ 0.573150] hub 4-0:1.0: 4 ports detected [ 0.573246] i8042: PNP: No PS/2 controller found. [ 0.573289] mousedev: PS/2 mouse device common for all mice [ 0.573349] rtc_cmos 00:02: RTC can wake from S4 [ 0.573482] rtc_cmos 00:02: registered as rtc0 [ 0.573489] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.573493] i2c /dev entries driver [ 0.573539] device-mapper: uevent: version 1.0.3 [ 0.573583] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 0.573591] platform eisa.0: Probing EISA bus 0 [ 0.573592] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.573593] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.573593] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.573594] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.573594] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.573595] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.573595] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.573596] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.573596] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.573596] platform eisa.0: EISA: Detected 0 cards [ 0.573780] ledtrig-cpu: registered to indicate activity on CPUs [ 0.573782] EFI Variables Facility v0.08 2004-May-17 [ 0.585952] NET: Registered protocol family 10 [ 0.588511] Segment Routing with IPv6 [ 0.588521] NET: Registered protocol family 17 [ 0.588547] Key type dns_resolver registered [ 0.588927] mce: Using 28 MCE banks [ 0.588932] RAS: Correctable Errors collector initialized. [ 0.588945] microcode: CPU0: patch_level=0x08701013 [ 0.588949] microcode: CPU1: patch_level=0x08701013 [ 0.588952] microcode: CPU2: patch_level=0x08701013 [ 0.588956] microcode: CPU3: patch_level=0x08701013 [ 0.588960] microcode: CPU4: patch_level=0x08701013 [ 0.588965] microcode: CPU5: patch_level=0x08701013 [ 0.588967] microcode: CPU6: patch_level=0x08701013 [ 0.588969] microcode: CPU7: patch_level=0x08701013 [ 0.588972] microcode: CPU8: patch_level=0x08701013 [ 0.588976] microcode: CPU9: patch_level=0x08701013 [ 0.588980] microcode: CPU10: patch_level=0x08701013 [ 0.588984] microcode: CPU11: patch_level=0x08701013 [ 0.589001] microcode: Microcode Update Driver: v2.2. [ 0.589088] resctrl: L3 allocation detected [ 0.589088] resctrl: L3DATA allocation detected [ 0.589089] resctrl: L3CODE allocation detected [ 0.589089] resctrl: MB allocation detected [ 0.589089] resctrl: L3 monitoring detected [ 0.589095] sched_clock: Marking stable (617072103, -27994290)->(700262995, -111185182) [ 0.589243] registered taskstats version 1 [ 0.589250] Loading compiled-in X.509 certificates [ 0.590075] Loaded X.509 cert 'Build time autogenerated kernel key: eac2ff7504e6f9dbe501ec4ebf08493d4c1a045b' [ 0.590350] Couldn't get size: 0x800000000000000e [ 0.590352] MODSIGN: Couldn't get UEFI db list [ 0.590486] Couldn't get size: 0x800000000000000e [ 0.590486] MODSIGN: Couldn't get UEFI MokListRT [ 0.590620] Couldn't get size: 0x800000000000000e [ 0.590620] MODSIGN: Couldn't get UEFI dbx list [ 0.590634] zswap: loaded using pool lzo/zbud [ 0.592961] Key type big_key registered [ 0.592962] Key type trusted registered [ 0.594021] Key type encrypted registered [ 0.594022] AppArmor: AppArmor sha1 policy hashing enabled [ 0.594561] ima: No TPM chip found, activating TPM-bypass! [ 0.594567] ima: Allocated hash algorithm: sha1 [ 0.594571] No architecture policies found [ 0.594575] evm: Initialising EVM extended attributes: [ 0.594575] evm: security.selinux [ 0.594575] evm: security.SMACK64 [ 0.594575] evm: security.SMACK64EXEC [ 0.594576] evm: security.SMACK64TRANSMUTE [ 0.594576] evm: security.SMACK64MMAP [ 0.594576] evm: security.apparmor [ 0.594576] evm: security.ima [ 0.594577] evm: security.capability [ 0.594577] evm: HMAC attrs: 0x1 [ 0.594908] Magic number: 3:875:208 [ 0.594934] vc vcsa: hash matches [ 0.594939] pci 0000:00:08.0: hash matches [ 0.595011] rtc_cmos 00:02: setting system clock to 2019-09-05T03:12:27 UTC (1567653147) [ 0.595150] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead. [ 0.596524] Freeing unused decrypted memory: 2040K [ 0.596801] Freeing unused kernel image memory: 2576K [ 0.615469] Write protecting the kernel read-only data: 22528k [ 0.615791] Freeing unused kernel image memory: 2016K [ 0.616001] Freeing unused kernel image memory: 1840K [ 0.623863] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.623866] Run /init as init process [ 0.667588] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 0.671294] ahci 0000:03:00.1: version 3.0 [ 0.671447] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled [ 0.671494] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 0.671495] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.672313] nvme nvme0: pci function 0000:01:00.0 [ 0.672397] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 0.672399] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 0.672538] scsi host0: ahci [ 0.672779] scsi host1: ahci [ 0.672873] scsi host2: ahci [ 0.672944] scsi host3: ahci [ 0.673033] scsi host4: ahci [ 0.674863] scsi host5: ahci [ 0.674938] scsi host6: ahci [ 0.680507] scsi host7: ahci [ 0.680544] ata1: SATA max UDMA/133 abar m131072@0xfca80000 port 0xfca80100 irq 52 [ 0.680545] ata2: SATA max UDMA/133 abar m131072@0xfca80000 port 0xfca80180 irq 52 [ 0.680546] ata3: DUMMY [ 0.680546] ata4: DUMMY [ 0.680548] ata5: SATA max UDMA/133 abar m131072@0xfca80000 port 0xfca80300 irq 52 [ 0.680549] ata6: SATA max UDMA/133 abar m131072@0xfca80000 port 0xfca80380 irq 52 [ 0.680549] ata7: DUMMY [ 0.680549] ata8: DUMMY [ 0.680698] ahci 0000:30:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.680700] ahci 0000:30:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.680837] scsi host8: ahci [ 0.680886] ata9: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 56 [ 0.681004] ahci 0000:31:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.681005] ahci 0000:31:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.681126] scsi host9: ahci [ 0.681170] ata10: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 58 [ 0.684501] libphy: r8169: probed [ 0.684773] r8169 0000:25:00.0 eth0: RTL8168h/8111h, 00:d8:61:5a:28:71, XID 541, IRQ 59 [ 0.684774] r8169 0000:25:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.700272] r8169 0000:25:00.0 enp37s0: renamed from eth0 [ 0.889591] nvme nvme0: missing or invalid SUBNQN field. [ 0.889611] nvme nvme0: Shutdown timeout set to 10 seconds [ 0.890579] nvme nvme0: 8/0/0 default/read/poll queues [ 0.890933] nvme nvme0: ctrl returned bogus length: 16 for NVME_NIDT_EUI64 [ 0.891109] nvme nvme0: ctrl returned bogus length: 16 for NVME_NIDT_EUI64 [ 0.891936] nvme0n1: p1 p2 [ 0.909533] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 0.909537] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 0.994858] ata10: SATA link down (SStatus 0 SControl 300) [ 0.996998] ata9: SATA link down (SStatus 0 SControl 300) [ 1.060364] usb 3-2: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [ 1.060366] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.060366] usb 3-2: Product: DataTraveler 2.0 [ 1.060367] usb 3-2: Manufacturer: Kingston [ 1.060367] usb 3-2: SerialNumber: 408D5C16530AC331892748AF [ 1.156427] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.157486] ata1.00: ATA-9: ST1000DM003-1ER162, CC46, max UDMA/133 [ 1.157488] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.158135] ata1.00: configured for UDMA/133 [ 1.158290] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC46 PQ: 0 ANSI: 5 [ 1.158457] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.158458] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.158468] sd 0:0:0:0: [sda] Write Protect is off [ 1.158469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.158481] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.158484] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.188411] usb 3-3: new low-speed USB device number 3 using xhci_hcd [ 1.212974] sda: sda1 [ 1.213408] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.233209] usb 1-1: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02 [ 1.233210] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.233211] usb 1-1: Product: Gaming Mouse G502 [ 1.233212] usb 1-1: Manufacturer: Logitech [ 1.233212] usb 1-1: SerialNumber: 087537463531 [ 1.354199] usb 3-3: New USB device found, idVendor=047d, idProduct=2041, bcdDevice= 1.07 [ 1.354200] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.354201] usb 3-3: Product: Kensington Slimblade Trackball [ 1.354202] usb 3-3: Manufacturer: Kensington [ 1.368839] usb-storage 3-2:1.0: USB Mass Storage device detected [ 1.368976] scsi host10: usb-storage 3-2:1.0 [ 1.369025] hidraw: raw HID events driver (C) Jiri Kosina [ 1.369054] usbcore: registered new interface driver usb-storage [ 1.369654] usbcore: registered new interface driver uas [ 1.372027] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 1.421691] usbcore: registered new interface driver usbhid [ 1.421692] usbhid: USB HID core driver [ 1.423463] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.0/0003:046D:C332.0001/input/input2 [ 1.423531] hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:03:00.0-1/input0 [ 1.423646] input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input3 [ 1.472037] tsc: Refined TSC clocksource calibration: 3599.999 MHz [ 1.472049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns [ 1.472302] clocksource: Switched to clocksource tsc [ 1.480702] input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input4 [ 1.480755] input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input5 [ 1.480824] hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:03:00.0-1/input1 [ 1.628346] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.629934] ata2.00: supports DRM functions and may not be fully accessible [ 1.630344] ata2.00: NCQ Send/Recv Log not supported [ 1.630345] ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 1.630346] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.631446] ata2.00: supports DRM functions and may not be fully accessible [ 1.631811] ata2.00: NCQ Send/Recv Log not supported [ 1.631960] usb 1-2: New USB device found, idVendor=0d8c, idProduct=0005, bcdDevice= 1.00 [ 1.631961] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.631962] usb 1-2: Product: Blue Snowball [ 1.631963] usb 1-2: Manufacturer: BLUE MICROPHONE [ 1.631964] usb 1-2: SerialNumber: 201604 [ 1.632651] ata2.00: configured for UDMA/133 [ 1.632817] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.632945] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.632967] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.632975] sd 1:0:0:0: [sdb] Write Protect is off [ 1.632976] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.632988] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.633428] sdb: sdb1 sdb2 < sdb5 > [ 1.634336] sd 1:0:0:0: [sdb] supports TCG Opal [ 1.634337] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.647475] hid-generic 0003:0D8C:0005.0004: No inputs registered, leaving [ 1.647535] hid-generic 0003:0D8C:0005.0004: hidraw2: USB HID v1.11 Device [BLUE MICROPHONE Blue Snowball ] on usb-0000:03:00.0-2/input2 [ 1.772425] usb 1-5: new low-speed USB device number 4 using xhci_hcd [ 1.944688] ata5: SATA link down (SStatus 0 SControl 330) [ 2.032445] usb 1-5: New USB device found, idVendor=258a, idProduct=1006, bcdDevice= 1.00 [ 2.032446] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.032447] usb 1-5: Product: USB KEYBOARD [ 2.032448] usb 1-5: Manufacturer: SINO WEALTH [ 2.055752] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.0/0003:258A:1006.0005/input/input9 [ 2.112576] hid-generic 0003:258A:1006.0005: input,hidraw3: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:03:00.0-5/input0 [ 2.140943] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.1/0003:258A:1006.0006/input/input10 [ 2.200563] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.1/0003:258A:1006.0006/input/input11 [ 2.200742] input: SINO WEALTH USB KEYBOARD Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.1/0003:258A:1006.0006/input/input13 [ 2.200792] hid-generic 0003:258A:1006.0006: input,hiddev1,hidraw4: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:03:00.0-5/input1 [ 2.328422] usb 1-6: new full-speed USB device number 5 using xhci_hcd [ 2.424429] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.426269] ata6.00: supports DRM functions and may not be fully accessible [ 2.427278] ata6.00: disabling queued TRIM support [ 2.427280] ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133 [ 2.427281] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.428305] ata6.00: supports DRM functions and may not be fully accessible [ 2.428838] ata6.00: disabling queued TRIM support [ 2.429628] ata6.00: configured for UDMA/133 [ 2.429671] scsi: waiting for bus probes to complete ... [ 2.525844] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4 [ 2.526097] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 2.526243] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 2.526305] sd 10:0:0:0: [sdc] 60549120 512-byte logical blocks: (31.0 GB/28.9 GiB) [ 2.526358] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.526378] sd 5:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.526385] sd 5:0:0:0: [sdd] Write Protect is off [ 2.526386] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.526400] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.526602] sd 10:0:0:0: [sdc] Write Protect is off [ 2.526604] sd 10:0:0:0: [sdc] Mode Sense: 45 00 00 00 [ 2.526787] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.528123] sdc: sdc1 [ 2.529598] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 2.530004] sdd: sdd1 sdd2 sdd3 sdd4 [ 2.531020] sd 5:0:0:0: [sdd] supports TCG Opal [ 2.531021] sd 5:0:0:0: [sdd] Attached SCSI disk [ 2.601039] usb 1-6: New USB device found, idVendor=cb10, idProduct=1157, bcdDevice= 2.00 [ 2.601040] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.601041] usb 1-6: Product: The Viterbi Keyboard [ 2.601041] usb 1-6: Manufacturer: Keebio [ 2.601042] usb 1-6: SerialNumber: 0 [ 2.629316] input: Keebio The Viterbi Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.0/0003:CB10:1157.0007/input/input14 [ 2.688549] hid-generic 0003:CB10:1157.0007: input,hidraw5: USB HID v1.11 Keyboard [Keebio The Viterbi Keyboard] on usb-0000:03:00.0-6/input0 [ 2.714797] input: Keebio The Viterbi Keyboard Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.1/0003:CB10:1157.0008/input/input15 [ 2.714885] input: Keebio The Viterbi Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.1/0003:CB10:1157.0008/input/input16 [ 2.772557] input: Keebio The Viterbi Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.1/0003:CB10:1157.0008/input/input17 [ 2.772763] hid-generic 0003:CB10:1157.0008: input,hidraw6: USB HID v1.11 Mouse [Keebio The Viterbi Keyboard] on usb-0000:03:00.0-6/input1 [ 2.900419] usb 1-8: new full-speed USB device number 6 using xhci_hcd [ 3.226807] usb 1-8: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01 [ 3.226809] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.292146] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.352645] systemd[1]: Inserted module 'autofs4' [ 3.387623] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.404035] systemd[1]: Detected architecture x86-64. [ 3.406256] systemd[1]: Set hostname to . [ 3.462976] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid → /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly. [ 3.465356] systemd[1]: Created slice User and Session Slice. [ 3.465414] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.465442] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.465502] systemd[1]: Listening on Journal Audit Socket. [ 3.465509] systemd[1]: Reached target Remote File Systems. [ 3.466108] systemd[1]: Listening on Syslog Socket. [ 3.473679] lp: driver loaded but no devices found [ 3.475114] ppdev: user-space parallel port driver [ 3.475368] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro [ 3.638329] Bluetooth: Core ver 2.22 [ 3.639712] NET: Registered protocol family 31 [ 3.639713] Bluetooth: HCI device and connection manager initialized [ 3.639716] Bluetooth: HCI socket layer initialized [ 3.639718] Bluetooth: L2CAP socket layer initialized [ 3.639720] Bluetooth: SCO socket layer initialized [ 3.677763] cryptd: max_cpu_qlen set to 1000 [ 3.680801] usbcore: registered new interface driver btusb [ 3.684977] AVX2 version of gcm_enc/dec engaged. [ 3.684978] AES CTR mode by8 optimization enabled [ 3.688364] ccp 0000:2d:00.1: enabling device (0000 -> 0002) [ 3.688728] ccp 0000:2d:00.1: ccp enabled [ 3.688769] ccp 0000:2d:00.1: psp enabled [ 3.688770] ccp 0000:2d:00.1: enabled [ 3.689808] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.692107] input: Kensington Kensington Slimblade Trackball as /devices/pci0000:00/0000:00:08.1/0000:2d:00.3/usb3/3-3/3-3:1.0/0003:047D:2041.0003/input/input18 [ 3.692775] kensington 0003:047D:2041.0003: input,hidraw7: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:2d:00.3-3/input0 [ 3.695815] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.698160] Bluetooth: hci0: read Intel version: 370810225019140f34 [ 3.698161] Bluetooth: hci0: Intel device is already patched. patch num: 34 [ 3.704292] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 3.704467] Intel(R) Wireless WiFi driver for Linux [ 3.704468] Copyright(c) 2003- 2015 Intel Corporation [ 3.704544] iwlwifi 0000:26:00.0: enabling device (0000 -> 0002) [ 3.709820] iwlwifi 0000:26:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm [ 3.729583] iwlwifi 0000:26:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220 [ 3.739880] Adding 15999996k swap on /dev/nvme0n1p1. Priority:-2 extents:1 across:15999996k SSFS [ 3.745740] snd_hda_intel 0000:2b:00.1: Handle vga_switcheroo audio client [ 3.745899] snd_hda_intel 0000:2d:00.4: enabling device (0000 -> 0002) [ 3.746829] [drm] amdgpu kernel modesetting enabled. [ 3.746884] Parsing CRAT table with 1 nodes [ 3.746887] Ignoring ACPI CRAT on non-APU system [ 3.746889] Virtual CRAT table created for CPU [ 3.746889] Parsing CRAT table with 1 nodes [ 3.746890] Creating topology SYSFS entries [ 3.746900] Topology: Add CPU node [ 3.746901] Finished initializing topology [ 3.746987] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 3.746987] fb0: switching to amdgpudrmfb from EFI VGA [ 3.747023] Console: switching to colour dummy device 80x25 [ 3.747283] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1849:0x1001 0xC3). [ 3.747290] [drm] register mmio base: 0xFCB00000 [ 3.747290] [drm] register mmio size: 524288 [ 3.747297] [drm] add ip block number 0 [ 3.747297] [drm] add ip block number 1 [ 3.747298] [drm] add ip block number 2 [ 3.747298] [drm] add ip block number 3 [ 3.747299] [drm] add ip block number 4 [ 3.747299] [drm] add ip block number 5 [ 3.747299] [drm] add ip block number 6 [ 3.747300] [drm] add ip block number 7 [ 3.747300] [drm] add ip block number 8 [ 3.747301] [drm] add ip block number 9 [ 3.748691] iwlwifi 0000:26:00.0: base HW address: d4:3b:04:b7:eb:66 [ 3.749715] [drm] UVD(0) is enabled in VM mode [ 3.749716] [drm] UVD(0) ENC is enabled in VM mode [ 3.749716] [drm] VCE enabled in VM mode [ 3.749735] amdgpu 0000:2b:00.0: No more image in the PCI ROM [ 3.749756] ATOM BIOS: 113-EXT23640-PRI [ 3.749782] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 3.749792] amdgpu 0000:2b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [ 3.749793] amdgpu 0000:2b:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 3.749794] amdgpu 0000:2b:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 3.749798] [drm] Detected VRAM RAM=8176M, BAR=256M [ 3.749799] [drm] RAM width 2048bits HBM [ 3.749839] [TTM] Zone kernel: Available graphics memory: 16474436 kiB [ 3.749840] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.749840] [TTM] Initializing pool allocator [ 3.749844] [TTM] Initializing DMA pool allocator [ 3.749869] [drm] amdgpu: 8176M of VRAM memory ready [ 3.749870] [drm] amdgpu: 8176M of GTT memory ready. [ 3.749881] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.750035] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 3.755863] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:29:00.0/0000:2a:00.0/0000:2b:00.1/sound/card0/input19 [ 3.755901] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:29:00.0/0000:2a:00.0/0000:2b:00.1/sound/card0/input20 [ 3.755931] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:29:00.0/0000:2a:00.0/0000:2b:00.1/sound/card0/input21 [ 3.755964] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:29:00.0/0000:2a:00.0/0000:2b:00.1/sound/card0/input22 [ 3.756001] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:29:00.0/0000:2a:00.0/0000:2b:00.1/sound/card0/input23 [ 3.756043] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:29:00.0/0000:2a:00.0/0000:2b:00.1/sound/card0/input24 [ 3.757647] [drm] use_doorbell being set to: [true] [ 3.757871] [drm] use_doorbell being set to: [true] [ 3.760212] [drm] Found UVD firmware Version: 1.87 Family ID: 17 [ 3.760216] [drm] PSP loading UVD firmware [ 3.760763] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 3.760765] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.760766] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.760766] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 3.760767] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 3.760767] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19 [ 3.760768] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18 [ 3.760769] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a [ 3.761126] [drm] Found VCE firmware Version: 55.3 Binary ID: 4 [ 3.761131] [drm] PSP loading VCE firmware [ 3.773255] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2/input25 [ 3.773327] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2/input26 [ 3.773402] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2/input27 [ 3.773469] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2/input28 [ 3.773533] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2/input29 [ 3.785478] systemd-journald[431]: Received request to flush runtime journal from PID 1 [ 3.788196] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 3.788402] thermal thermal_zone0: failed to read out thermal zone (-61) [ 3.817565] iwlwifi 0000:26:00.0 wlp38s0: renamed from wlan0 [ 3.825258] usbcore: registered new interface driver snd-usb-audio [ 3.909404] [drm] reserve 0x400000 from 0xf400d00000 for PSP TMR SIZE [ 4.152061] [drm] Display Core initialized with v3.2.08! [ 4.187785] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.187785] [drm] Driver supports precise vblank timestamp query. [ 4.209964] [drm] UVD and UVD ENC initialized successfully. [ 4.212167] audit: type=1400 audit(1567653151.113:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=995 comm="apparmor_parser" [ 4.212242] audit: type=1400 audit(1567653151.113:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=989 comm="apparmor_parser" [ 4.212244] audit: type=1400 audit(1567653151.113:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=989 comm="apparmor_parser" [ 4.212277] audit: type=1400 audit(1567653151.113:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=991 comm="apparmor_parser" [ 4.212374] audit: type=1400 audit(1567653151.113:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=990 comm="apparmor_parser" [ 4.212846] audit: type=1400 audit(1567653151.113:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=997 comm="apparmor_parser" [ 4.212956] audit: type=1400 audit(1567653151.113:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=992 comm="apparmor_parser" [ 4.212958] audit: type=1400 audit(1567653151.113:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=992 comm="apparmor_parser" [ 4.212959] audit: type=1400 audit(1567653151.113:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=992 comm="apparmor_parser" [ 4.309609] [drm] VCE initialized successfully. [ 4.310364] kfd kfd: Allocated 3969056 bytes on gart [ 4.310385] Virtual CRAT table created for GPU [ 4.310386] Parsing CRAT table with 1 nodes [ 4.310402] Creating topology SYSFS entries [ 4.310540] Topology: Add dGPU node [0x687f:0x1002] [ 4.310624] kfd kfd: added device 1002:687f [ 4.311761] [drm] fb mappable at 0xE1100000 [ 4.311762] [drm] vram apper at 0xE0000000 [ 4.311762] [drm] size 8294400 [ 4.311763] [drm] fb depth is 24 [ 4.311763] [drm] pitch is 7680 [ 4.311826] fbcon: amdgpudrmfb (fb0) is primary device [ 4.311900] Console: switching to colour frame buffer device 240x67 [ 4.311923] amdgpu 0000:2b:00.0: fb0: amdgpudrmfb frame buffer device [ 4.340178] amdgpu 0000:2b:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 4.340179] amdgpu 0000:2b:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 4.340180] amdgpu 0000:2b:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 4.340180] amdgpu 0000:2b:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 4.340181] amdgpu 0000:2b:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 4.340182] amdgpu 0000:2b:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 4.340183] amdgpu 0000:2b:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 4.340183] amdgpu 0000:2b:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 4.340184] amdgpu 0000:2b:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 4.340185] amdgpu 0000:2b:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 4.340185] amdgpu 0000:2b:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 4.340186] amdgpu 0000:2b:00.0: ring sdma1 uses VM inv eng 1 on hub 1 [ 4.340186] amdgpu 0000:2b:00.0: ring uvd_0 uses VM inv eng 4 on hub 1 [ 4.340187] amdgpu 0000:2b:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1 [ 4.340188] amdgpu 0000:2b:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1 [ 4.340189] amdgpu 0000:2b:00.0: ring vce0 uses VM inv eng 7 on hub 1 [ 4.340189] amdgpu 0000:2b:00.0: ring vce1 uses VM inv eng 8 on hub 1 [ 4.340190] amdgpu 0000:2b:00.0: ring vce2 uses VM inv eng 9 on hub 1 [ 4.340244] [drm] ECC is not present. [ 4.340935] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:2b:00.0 on minor 0 [ 5.444979] kauditd_printk_skb: 27 callbacks suppressed [ 5.444980] audit: type=1400 audit(1567653152.345:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.discord" pid=1015 comm="apparmor_parser" [ 5.445831] audit: type=1400 audit(1567653152.345:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-logs" pid=1014 comm="apparmor_parser" [ 5.483226] audit: type=1400 audit(1567653152.381:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=1007 comm="apparmor_parser" [ 5.499490] audit: type=1400 audit(1567653152.397:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=1019 comm="apparmor_parser" [ 5.532329] audit: type=1400 audit(1567653152.433:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=1017 comm="apparmor_parser" [ 5.606551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.606552] Bluetooth: BNEP filters: protocol multicast [ 5.606555] Bluetooth: BNEP socket layer initialized [ 5.773528] audit: type=1400 audit(1567653152.673:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7396/usr/lib/snapd/snap-confine" pid=1279 comm="apparmor_parser" [ 5.773530] audit: type=1400 audit(1567653152.673:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/7396/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1279 comm="apparmor_parser" [ 5.813760] audit: type=1400 audit(1567653152.713:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=1281 comm="apparmor_parser" [ 5.815622] audit: type=1400 audit(1567653152.713:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=1287 comm="apparmor_parser" [ 5.816078] Generic PHY r8169-2500:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-2500:00, irq=IGNORE) [ 5.927029] r8169 0000:25:00.0 enp37s0: Link is Down [ 6.121406] audit: type=1400 audit(1567653153.021:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=1301 comm="apparmor_parser" [ 8.896259] ccp 0000:2d:00.1: sev command 0x4 timed out, disabling PSP [ 8.896262] ccp 0000:2d:00.1: SEV: failed to get status. Error: 0x0 [ 8.903431] kvm: disabled by bios [ 8.905081] MCE: In-kernel MCE decoding enabled. [ 9.008609] r8169 0000:25:00.0 enp37s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.008619] IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready [ 10.520652] kauditd_printk_skb: 6 callbacks suppressed [ 10.520653] audit: type=1400 audit(1567653157.421:54): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.discord" pid=1738 comm="apparmor_parser" [ 10.825682] audit: type=1400 audit(1567653157.725:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=1768 comm="apparmor_parser" [ 11.646504] audit: type=1400 audit(1567653158.545:56): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=1767 comm="apparmor_parser" [ 107.844842] rfkill: input handler disabled [ 108.029883] Bluetooth: RFCOMM TTY layer initialized [ 108.029886] Bluetooth: RFCOMM socket layer initialized [ 108.029889] Bluetooth: RFCOMM ver 1.11 [ 108.308309] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.