[  496.627771] usb usb1-port7: resume, status 0
[  500.716052] usb 1-7: usb auto-suspend, wakeup 1
[  585.951924] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  585.971649] usb 1-7: usb wakeup-resume
[  585.971696] usb 1-7: Waited 0ms for CONNECT
[  585.971699] usb 1-7: finish resume
[  585.972154] usb usb1-port7: resume, status 0
[  588.475537] usb 1-7: usb auto-suspend, wakeup 1
[  669.209789] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  669.229704] usb 1-7: usb wakeup-resume
[  669.229767] usb 1-7: Waited 0ms for CONNECT
[  669.229773] usb 1-7: finish resume
[  669.230128] usb usb1-port7: resume, status 0
[  671.730097] usb 1-7: usb auto-suspend, wakeup 1
[  859.858818] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  859.878825] usb 1-7: usb wakeup-resume
[  859.878870] usb 1-7: Waited 0ms for CONNECT
[  859.878873] usb 1-7: finish resume
[  859.879338] usb usb1-port7: resume, status 0
[  862.194815] usb 1-7: usb auto-suspend, wakeup 1
[  867.010725] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  867.030704] usb 1-7: usb wakeup-resume
[  867.030749] usb 1-7: Waited 0ms for CONNECT
[  867.030752] usb 1-7: finish resume
[  867.031217] usb usb1-port7: resume, status 0
[  869.550618] usb 1-7: usb auto-suspend, wakeup 1
[  900.406873] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[  900.453971] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  900.453979] usb 1-7: usb auto-resume
[  900.522134] usb 1-7: Waited 0ms for CONNECT
[  900.522139] usb 1-7: finish resume
[  900.549797] PM: suspend entry (deep)
[  900.567807] Filesystems sync: 0.018 seconds
[  900.569881] Freezing user space processes ... (elapsed 0.004 seconds) done.
[  900.574192] OOM killer disabled.
[  900.574194] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  900.576025] printk: Suspending console(s) (use no_console_suspend to debug)
[  900.577547] wlp2s0: deauthenticating from ba:7a:4a:34:01:94 by local choice (Reason: 3=DEAUTH_LEAVING)
[  900.580754] usb 1-9: usb suspend, wakeup 0
[  900.807062] usb 1-7: usb suspend, wakeup 0
[  900.838341] usb 2-3: usb suspend, wakeup 0
[  900.863138] hub 2-0:1.0: hub_suspend
[  900.863176] usb usb2: bus suspend, wakeup 0
[  900.863335] hub 1-0:1.0: hub_suspend
[  900.863391] usb usb1: bus suspend, wakeup 0
[  900.863895] e1000e: EEE TX LPI TIMER: 00000011
[  901.270679] ACPI: EC: interrupt blocked
[  901.275429] xhci_hcd 0000:00:14.0: wakeup: 1
[  901.325898] xhci_hcd 0000:00:14.0: --> PCI D3hot
[  901.326913] ACPI: Preparing to enter system sleep state S3
[  901.334801] ACPI: EC: event blocked
[  901.334803] ACPI: EC: EC stopped
[  901.334804] PM: Saving platform NVS memory
[  901.334815] Disabling non-boot CPUs ...
[  901.336746] smpboot: CPU 1 is now offline
[  901.343073] smpboot: CPU 2 is now offline
[  901.348104] smpboot: CPU 3 is now offline
[  901.353023] smpboot: CPU 4 is now offline
[  901.357946] smpboot: CPU 5 is now offline
[  901.361906] IRQ 144: no longer affine to CPU6
[  901.362925] smpboot: CPU 6 is now offline
[  901.366776] IRQ 125: no longer affine to CPU7
[  901.366786] IRQ 128: no longer affine to CPU7
[  901.367812] smpboot: CPU 7 is now offline
[  901.373975] ACPI: Low-level resume complete
[  901.374066] ACPI: EC: EC started
[  901.374067] PM: Restoring platform NVS memory
[  901.374759] Enabling non-boot CPUs ...
[  901.374803] x86: Booting SMP configuration:
[  901.374803] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  901.375433] CPU1 is up
[  901.375462] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  901.376092] CPU2 is up
[  901.376119] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  901.376754] CPU3 is up
[  901.376781] smpboot: Booting Node 0 Processor 4 APIC 0x1
[  901.377546] CPU4 is up
[  901.377576] smpboot: Booting Node 0 Processor 5 APIC 0x3
[  901.378223] CPU5 is up
[  901.378249] smpboot: Booting Node 0 Processor 6 APIC 0x5
[  901.378917] CPU6 is up
[  901.378944] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  901.379629] CPU7 is up
[  901.382370] ACPI: Waking up from system sleep state S3
[  901.404352] ACPI: EC: interrupt unblocked
[  901.468753] ACPI: EC: event unblocked
[  901.469774] usb usb1: usb resume
[  901.469776] usb usb2: usb resume
[  901.469839] hub 2-0:1.0: hub_resume
[  901.469911] usb usb2-port3: status 0343 change 0000
[  901.469979] usb 2-3: Waited 0ms for CONNECT
[  901.469982] usb 2-3: finish resume
[  901.473637] usb 2-3: retry with reset-resume
[  901.477292] usb 2-3: Disable of device-initiated U1 failed.
[  901.480799] usb 2-3: Disable of device-initiated U2 failed.
[  901.480827] hub 1-0:1.0: hub_resume
[  901.480921] usb usb1-port7: status 0101 change 0001
[  901.480944] usb usb1-port8: status 0101 change 0001
[  901.480973] usb usb1-port9: status 0101 change 0001
[  901.480993] usb usb1-port10: status 0101 change 0001
[  901.545067] usb usb2-port3: not warm reset yet, waiting 60ms
[  901.589049] usb 1-8: Waited 0ms for CONNECT
[  901.589050] usb 1-8: finish reset-resume
[  901.589176] usb 1-7: Waited 0ms for CONNECT
[  901.589177] usb 1-7: finish reset-resume
[  901.589219] usb 1-9: Waited 0ms for CONNECT
[  901.589220] usb 1-9: finish reset-resume
[  901.674495] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  901.688492] nvme nvme0: Shutdown timeout set to 8 seconds
[  901.702978] nvme nvme0: 8/0/0 default/read/poll queues
[  901.821298] usb 1-8: reset high-speed USB device number 3 using xhci_hcd
[  902.097722] usb 1-7: reset full-speed USB device number 2 using xhci_hcd
[  902.210571] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4720]
[  902.244393] psmouse serio1: synaptics: queried min coordinates: x [1264..], y [1132..]
[  902.248493] btusb 1-7:1.0: no reset_resume for driver btusb?
[  902.248498] btusb 1-7:1.1: no reset_resume for driver btusb?
[  902.248504] btusb 1-7:1.0: forced unbind
[  902.373496] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[  902.521217] usb 1-9: ep0 maxpacket = 8
[  902.526221] acpi LNXPOWER:01: Turning OFF
[  902.526858] OOM killer enabled.
[  902.526861] Restarting tasks ... 
[  902.527496] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[  902.527502] hub 1-0:1.0: state 7 ports 12 chg 0780 evt 0100
[  902.527541] usb usb1-port7: status 0103, change 0000, 12 Mb/s
[  902.533599] done.
[  902.533849] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[  902.533910] btusb 1-7:1.0: usb_probe_interface
[  902.533913] btusb 1-7:1.0: usb_probe_interface - got id
[  902.534761] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[  902.535772] Bluetooth: hci0: Device revision is 16
[  902.535773] Bluetooth: hci0: Secure boot is enabled
[  902.535774] Bluetooth: hci0: OTP lock is enabled
[  902.535775] Bluetooth: hci0: API lock is enabled
[  902.535776] Bluetooth: hci0: Debug lock is disabled
[  902.535777] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  902.535995] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[  902.544953] usb usb1-port8: resume, status 0
[  902.544956] usb usb1-port8: status 0503, change 0004, 480 Mb/s
[  902.544974] usb usb1-port9: status 0103, change 0000, 12 Mb/s
[  902.544981] usb usb1-port10: status 0101, change 0000, 12 Mb/s
[  902.601210] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=3
[  902.632856] PM: suspend exit
[  902.680948] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[  902.829773] usb 1-10: skipped 1 descriptor after interface
[  902.829775] usb 1-10: skipped 1 descriptor after interface
[  902.829888] usb 1-10: default language 0x0409
[  902.830233] usb 1-10: udev 6, busnum 1, minor = 5
[  902.830235] usb 1-10: New USB device found, idVendor=056a, idProduct=5146, bcdDevice= 0.03
[  902.830237] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  902.830238] usb 1-10: Product: Pen and multitouch sensor
[  902.830239] usb 1-10: Manufacturer: Wacom Co.,Ltd.
[  902.830398] usb 1-10: usb_probe_device
[  902.830420] usb 1-10: configuration #1 chosen from 1 choice
[  902.831347] usb 1-10: adding 1-10:1.0 (config #1, interface 0)
[  902.831547] usbhid 1-10:1.0: usb_probe_interface
[  902.831549] usbhid 1-10:1.0: usb_probe_interface - got id
[  902.833401] input: Wacom Pen and multitouch sensor Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:056A:5146.0006/input/input29
[  902.893106] wacom 0003:056A:5146.0006: hidraw0: USB HID v1.11 Device [Wacom Co.,Ltd. Pen and multitouch sensor] on usb-0000:00:14.0-10/input0
[  902.893145] usb 1-10: adding 1-10:1.1 (config #1, interface 1)
[  902.893299] usbhid 1-10:1.1: usb_probe_interface
[  902.893302] usbhid 1-10:1.1: usb_probe_interface - got id
[  902.894927] input: Wacom Pen and multitouch sensor Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:056A:5146.0007/input/input31
[  902.895336] wacom 0003:056A:5146.0007: hidraw1: USB HID v1.11 Mouse [Wacom Co.,Ltd. Pen and multitouch sensor] on usb-0000:00:14.0-10/input1
[  903.768280] e1000e: enp0s31f6 NIC Link is Down
[  903.963896] Bluetooth: hci0: Waiting for firmware download to complete
[  903.964929] Bluetooth: hci0: Firmware loaded in 1397360 usecs
[  903.965012] Bluetooth: hci0: Waiting for device to boot
[  903.976867] Bluetooth: hci0: Device booted in 11634 usecs
[  903.976896] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[  903.979851] Bluetooth: hci0: Applying Intel DDC parameters completed
[  904.013291] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[  904.333072] usb 1-8: usb auto-suspend, wakeup 0
[  906.837220] usb 1-7: usb auto-suspend, wakeup 1
[  907.776351] wlp2s0: authenticate with ba:7a:4a:34:01:94
[  907.787956] wlp2s0: send auth to ba:7a:4a:34:01:94 (try 1/3)
[  907.795241] wlp2s0: authenticated
[  907.796959] wlp2s0: associate with ba:7a:4a:34:01:94 (try 1/3)
[  907.801363] wlp2s0: RX AssocResp from ba:7a:4a:34:01:94 (capab=0x431 status=0 aid=1)
[  907.814141] wlp2s0: associated
[  907.838237] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  908.058050] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ba:7a:4a:34:01:94
[  943.620323] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  943.640067] usb 1-7: usb wakeup-resume
[  943.640113] usb 1-7: Waited 0ms for CONNECT
[  943.640117] usb 1-7: finish resume
[  943.640544] usb usb1-port7: resume, status 0
[  946.160018] usb 1-7: usb auto-suspend, wakeup 1
[  960.847740] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[  960.867754] usb 1-7: usb wakeup-resume
[  960.867811] usb 1-7: Waited 0ms for CONNECT
[  960.867814] usb 1-7: finish resume
[  960.868278] usb usb1-port7: resume, status 0
[  963.355439] usb 1-7: usb auto-suspend, wakeup 1
[ 1037.177218] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080
[ 1037.197081] usb 1-7: usb wakeup-resume
[ 1037.197114] usb 1-7: Waited 0ms for CONNECT
[ 1037.197117] usb 1-7: finish resume
[ 1037.197563] usb usb1-port7: resume, status 0
[ 1039.717053] usb 1-7: usb auto-suspend, wakeup 1