[ 0.000000] Linux version 5.1.0-050100rc5-generic (kernel@tangerine) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #201904141930 SMP Sun Apr 14 23:34:19 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-050100rc5-generic root=UUID=4b3ca7ee-f7ef-4f10-ae37-d86fdeb64942 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008606afff] usable [ 0.000000] BIOS-e820: [mem 0x000000008606b000-0x000000008606bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008606c000-0x000000008606cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008606d000-0x0000000096f9afff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096f9b000-0x000000009749afff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000009749b000-0x0000000097d7efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000097d7f000-0x0000000097f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000097f7f000-0x0000000097ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000097fff000-0x0000000097ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000098000000-0x000000009e7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by HP [ 0.000000] efi: ACPI=0x97ffe000 ACPI 2.0=0x97ffe014 SMBIOS=0x97765000 SMBIOS 3.0=0x97763000 ESRT=0x9486a018 MEMATTR=0x93ff0018 [ 0.000000] SMBIOS 3.1.0 present. [ 0.000000] DMI: HP HP EliteBook 840 G5/83B2, BIOS Q78 Ver. 01.04.00 09/12/2018 [ 0.000000] tsc: Detected 1800.000 MHz processor [ 0.001819] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001822] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001832] last_pfn = 0x45f800 max_arch_pfn = 0x400000000 [ 0.001838] MTRR default type: write-back [ 0.001839] MTRR fixed ranges enabled: [ 0.001841] 00000-9FFFF write-back [ 0.001842] A0000-BFFFF uncachable [ 0.001843] C0000-FFFFF write-protect [ 0.001845] MTRR variable ranges enabled: [ 0.001847] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.001848] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.001849] 2 base 009C000000 mask 7FFC000000 uncachable [ 0.001851] 3 base 1C00000000 mask 7C00000000 uncachable [ 0.001852] 4 disabled [ 0.001852] 5 disabled [ 0.001853] 6 disabled [ 0.001854] 7 disabled [ 0.001854] 8 disabled [ 0.001855] 9 disabled [ 0.003721] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004053] last_pfn = 0x98000 max_arch_pfn = 0x400000000 [ 0.024568] esrt: Reserving ESRT space from 0x000000009486a018 to 0x000000009486a050. [ 0.024588] check: Scanning 1 areas for low memory corruption [ 0.024594] Using GB pages for direct mapping [ 0.024597] BRK [0x399e01000, 0x399e01fff] PGTABLE [ 0.024600] BRK [0x399e02000, 0x399e02fff] PGTABLE [ 0.024601] BRK [0x399e03000, 0x399e03fff] PGTABLE [ 0.024645] BRK [0x399e04000, 0x399e04fff] PGTABLE [ 0.024648] BRK [0x399e05000, 0x399e05fff] PGTABLE [ 0.024823] BRK [0x399e06000, 0x399e06fff] PGTABLE [ 0.024867] BRK [0x399e07000, 0x399e07fff] PGTABLE [ 0.025013] BRK [0x399e08000, 0x399e08fff] PGTABLE [ 0.025073] BRK [0x399e09000, 0x399e09fff] PGTABLE [ 0.025136] Secure boot could not be determined [ 0.025137] RAMDISK: [mem 0x338b3000-0x35c50fff] [ 0.025151] ACPI: Early table checksum verification disabled [ 0.025155] ACPI: RSDP 0x0000000097FFE014 000024 (v02 HPQOEM) [ 0.025160] ACPI: XSDT 0x0000000097FAA188 000154 (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.025169] ACPI: FACP 0x0000000097FDA000 00010C (v05 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.025176] ACPI: DSDT 0x0000000097FB6000 0200C9 (v02 HPQOEM 83B2 00000000 INTL 20160527) [ 0.025181] ACPI: FACS 0x0000000097F5C000 000040 [ 0.025184] ACPI: SSDT 0x0000000097FFC000 00012A (v02 HP ShmTable 00000001 INTL 20160527) [ 0.025189] ACPI: RTMA 0x0000000097FFA000 00009E (v01 HP _HBMART_ 00001000 HP 00000001) [ 0.025193] ACPI: SSDT 0x0000000097FE6000 013C24 (v02 AcpiRe PLT_RTD3 00001000 INTL 20160527) [ 0.025197] ACPI: SSDT 0x0000000097FE5000 000EC4 (v02 HP UcsiAcpi 00000001 INTL 20160527) [ 0.025200] ACPI: SSDT 0x0000000097FE4000 0000FB (v02 HP UcsiCntr 00000001 INTL 20160527) [ 0.025204] ACPI: UEFI 0x0000000097F6D000 000042 (v01 HPQOEM EDK2 00000002 01000013) [ 0.025208] ACPI: SSDT 0x0000000097FE3000 0003C8 (v02 HPQOEM Tpm2Tabl 00001000 INTL 20160527) [ 0.025212] ACPI: TPM2 0x0000000097FE2000 000034 (v03 HPQOEM EDK2 00000002 01000013) [ 0.025216] ACPI: SSDT 0x0000000097FDE000 003053 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.025220] ACPI: MSDM 0x0000000097FDD000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.025224] ACPI: SLIC 0x0000000097FDC000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001) [ 0.025227] ACPI: WSMT 0x0000000097FDB000 000028 (v01 HPQOEM 83B2 00000001 HP 00000001) [ 0.025231] ACPI: HPET 0x0000000097FD9000 000038 (v01 HPQOEM 83B2 00000001 HP 00000001) [ 0.025235] ACPI: APIC 0x0000000097FD8000 00012C (v03 HPQOEM 83B2 00000001 HP 00000001) [ 0.025239] ACPI: MCFG 0x0000000097FD7000 00003C (v01 HPQOEM 83B2 00000001 HP 00000001) [ 0.025242] ACPI: SSDT 0x0000000097FB5000 0001BC (v02 HPQOEM Sata0Ide 00001000 INTL 20160527) [ 0.025246] ACPI: SSDT 0x0000000097FB4000 000734 (v01 HPQOEM PtidDevc 00001000 INTL 20160527) [ 0.025250] ACPI: SSDT 0x0000000097FB0000 0038F9 (v02 DptfTa DptfTabl 00001000 INTL 20160527) [ 0.025254] ACPI: SSDT 0x0000000097FAB000 004163 (v02 GddvDu GddvDumm 00001000 INTL 20160527) [ 0.025258] ACPI: SSDT 0x0000000097FA8000 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.025262] ACPI: SSDT 0x0000000097FFD000 0009CF (v02 CtdpB CtdpB 00001000 INTL 20160527) [ 0.025267] ACPI: SSDT 0x0000000097FA7000 000141 (v02 INTEL HdaDsp 00000000 INTL 20160527) [ 0.025272] ACPI: SSDT 0x0000000097FA6000 00029F (v02 INTEL sensrhub 00000000 INTL 20160527) [ 0.025276] ACPI: SSDT 0x0000000097FA5000 000346 (v01 INTEL EInkApp 00000000 INTL 20160527) [ 0.025282] ACPI: SSDT 0x0000000097FA4000 000505 (v02 INTEL Wwan 00000001 INTL 20160527) [ 0.025286] ACPI: DBGP 0x0000000097FA3000 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.025290] ACPI: DBG2 0x0000000097FA2000 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.025294] ACPI: DMAR 0x0000000097FA1000 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.025298] ACPI: SSDT 0x0000000097F9C000 004B97 (v02 HP HPTBT 00001000 INTL 20160527) [ 0.025302] ACPI: NHLT 0x0000000097F9B000 00002D (v00 INTEL KBL 00000002 01000013) [ 0.025306] ACPI: SSDT 0x0000000097F9A000 000148 (v01 HP HPSANIMD 00001000 INTL 20160527) [ 0.025309] ACPI: SSDT 0x0000000097F99000 000E6B (v01 HP HPINNBWL 00001000 INTL 20160527) [ 0.025313] ACPI: SSDT 0x0000000097F98000 000032 (v01 HP HPCONDEV 00001000 INTL 20160527) [ 0.025317] ACPI: ASF! 0x0000000097F97000 0000A0 (v32 HPQOEM UYA 00000001 TFSM 000F4240) [ 0.025321] ACPI: FPDT 0x0000000097F96000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.025325] ACPI: BGRT 0x0000000097F95000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.025329] ACPI: SSDT 0x0000000097FFB000 0002F9 (v02 HP PwrCtlEv 00000001 INTL 20160527) [ 0.025339] ACPI: Local APIC address 0xfee00000 [ 0.025585] No NUMA configuration found [ 0.025587] Faking a node at [mem 0x0000000000000000-0x000000045f7fffff] [ 0.025601] NODE_DATA(0) allocated [mem 0x45f7d5000-0x45f7fffff] [ 0.025885] cma: Reserved 16 MiB at 0x000000045e400000 [ 0.025917] Zone ranges: [ 0.025919] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.025920] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.025922] Normal [mem 0x0000000100000000-0x000000045f7fffff] [ 0.025923] Device empty [ 0.025925] Movable zone start for each node [ 0.025930] Early memory node ranges [ 0.025931] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.025932] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.025933] node 0: [mem 0x0000000000100000-0x000000008606afff] [ 0.025934] node 0: [mem 0x000000008606d000-0x0000000096f9afff] [ 0.025935] node 0: [mem 0x0000000097fff000-0x0000000097ffffff] [ 0.025936] node 0: [mem 0x0000000100000000-0x000000045f7fffff] [ 0.026047] Zeroed struct page in unavailable ranges: 4298 pages [ 0.026048] Initmem setup node 0 [mem 0x0000000000001000-0x000000045f7fffff] [ 0.026051] On node 0 totalpages: 4155190 [ 0.026052] DMA zone: 64 pages used for memmap [ 0.026053] DMA zone: 23 pages reserved [ 0.026054] DMA zone: 3996 pages, LIFO batch:0 [ 0.026224] DMA32 zone: 9599 pages used for memmap [ 0.026225] DMA32 zone: 614298 pages, LIFO batch:63 [ 0.051948] Normal zone: 55264 pages used for memmap [ 0.051949] Normal zone: 3536896 pages, LIFO batch:63 [ 0.186632] Reserving Intel graphics memory at [mem 0x9c800000-0x9e7fffff] [ 0.187197] ACPI: PM-Timer IO Port: 0x1808 [ 0.187200] ACPI: Local APIC address 0xfee00000 [ 0.187211] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.187212] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.187213] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.187214] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.187214] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.187215] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.187216] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.187217] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.187218] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.187218] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.187219] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.187220] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.187221] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.187222] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.187223] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.187224] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.187256] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.187259] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.187261] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.187263] ACPI: IRQ0 used by override. [ 0.187265] ACPI: IRQ9 used by override. [ 0.187267] Using ACPI (MADT) for SMP configuration information [ 0.187269] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.187281] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.187305] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.187308] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.187310] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.187312] PM: Registered nosave memory: [mem 0x8606b000-0x8606bfff] [ 0.187313] PM: Registered nosave memory: [mem 0x8606c000-0x8606cfff] [ 0.187315] PM: Registered nosave memory: [mem 0x96f9b000-0x9749afff] [ 0.187316] PM: Registered nosave memory: [mem 0x9749b000-0x97d7efff] [ 0.187316] PM: Registered nosave memory: [mem 0x97d7f000-0x97f7efff] [ 0.187317] PM: Registered nosave memory: [mem 0x97f7f000-0x97ffefff] [ 0.187319] PM: Registered nosave memory: [mem 0x98000000-0x9e7fffff] [ 0.187320] PM: Registered nosave memory: [mem 0x9e800000-0xefffffff] [ 0.187321] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.187322] PM: Registered nosave memory: [mem 0xf8000000-0xfe00ffff] [ 0.187322] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.187323] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.187325] [mem 0x9e800000-0xefffffff] available for PCI devices [ 0.187327] Booting paravirtualized kernel on bare hardware [ 0.187331] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.187345] random: get_random_bytes called from start_kernel+0x97/0x515 with crng_init=0 [ 0.187360] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.187692] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.187701] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.187703] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.187740] Built 1 zonelists, mobility grouping on. Total pages: 4090240 [ 0.187740] Policy zone: Normal [ 0.187742] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-050100rc5-generic root=UUID=4b3ca7ee-f7ef-4f10-ae37-d86fdeb64942 ro quiet splash vt.handoff=1 [ 0.195095] Calgary: detecting Calgary via BIOS EBDA area [ 0.195097] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.267771] Memory: 16097628K/16620760K available (14339K kernel code, 2354K rwdata, 4372K rodata, 2572K init, 5188K bss, 506748K reserved, 16384K cma-reserved) [ 0.267970] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.267978] Kernel/User page tables isolation: enabled [ 0.268000] ftrace: allocating 41869 entries in 164 pages [ 0.295975] rcu: Hierarchical RCU implementation. [ 0.295977] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.295978] Tasks RCU enabled. [ 0.295980] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.295981] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.300790] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.301169] Console: colour dummy device 80x25 [ 0.301174] printk: console [tty0] enabled [ 0.301196] ACPI: Core revision 20190215 [ 0.301992] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.302025] hpet clockevent registered [ 0.302073] APIC: Switch to symmetric I/O mode setup [ 0.302076] DMAR: Host address width 39 [ 0.302078] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.302087] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.302088] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.302097] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.302099] DMAR: RMRR base: 0x00000097c5a000 end: 0x00000097c79fff [ 0.302100] DMAR: RMRR base: 0x0000009c000000 end: 0x0000009e7fffff [ 0.302102] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.302103] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.302105] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.302106] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.302107] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.303960] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.303962] x2apic enabled [ 0.303980] Switched APIC routing to cluster x2apic. [ 0.308167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.326041] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.326060] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000) [ 0.326063] pid_max: default: 32768 minimum: 301 [ 0.331951] LSM: Security Framework initializing [ 0.331966] Yama: becoming mindful. [ 0.331998] AppArmor: AppArmor initialized [ 0.335902] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.337980] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.338060] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.338126] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.338358] *** VALIDATE proc *** [ 0.338423] *** VALIDATE cgroup1 *** [ 0.338425] *** VALIDATE cgroup2 *** [ 0.338471] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.338472] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.338480] mce: CPU supports 10 MCE banks [ 0.338497] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.338531] process: using mwait in idle threads [ 0.338534] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.338535] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.338538] Spectre V2 : Mitigation: Full generic retpoline [ 0.338539] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.338539] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.338549] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.338549] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.338551] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.338946] Freeing SMP alternatives memory: 36K [ 0.342222] TSC deadline timer enabled [ 0.342230] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.342379] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.342430] ... version: 4 [ 0.342431] ... bit width: 48 [ 0.342431] ... generic registers: 4 [ 0.342432] ... value mask: 0000ffffffffffff [ 0.342433] ... max period: 00007fffffffffff [ 0.342434] ... fixed-purpose events: 3 [ 0.342435] ... event mask: 000000070000000f [ 0.342495] rcu: Hierarchical SRCU implementation. [ 0.343469] random: crng done (trusting CPU's manufacturer) [ 0.344322] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.344433] smp: Bringing up secondary CPUs ... [ 0.344548] x86: Booting SMP configuration: [ 0.344549] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.354133] smp: Brought up 1 node, 8 CPUs [ 0.354133] smpboot: Max logical packages: 1 [ 0.354133] smpboot: Total of 8 processors activated (28800.00 BogoMIPS) [ 0.358647] devtmpfs: initialized [ 0.358647] x86/mm: Memory block size: 128MB [ 0.359801] PM: Registering ACPI NVS region [mem 0x8606b000-0x8606bfff] (4096 bytes) [ 0.359801] PM: Registering ACPI NVS region [mem 0x97d7f000-0x97f7efff] (2097152 bytes) [ 0.359801] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.359801] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.359801] pinctrl core: initialized pinctrl subsystem [ 0.359801] PM: RTC time: 11:35:07, date: 2019-04-16 [ 0.359801] NET: Registered protocol family 16 [ 0.359801] audit: initializing netlink subsys (disabled) [ 0.359801] audit: type=2000 audit(1555414507.060:1): state=initialized audit_enabled=0 res=1 [ 0.359801] EISA bus registered [ 0.359801] cpuidle: using governor ladder [ 0.359801] cpuidle: using governor menu [ 0.359801] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.359801] ACPI: bus type PCI registered [ 0.359801] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.362055] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.362064] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.362065] PCI: Using configuration type 1 for base access [ 0.364083] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.364083] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.364083] ACPI: Added _OSI(Module Device) [ 0.364083] ACPI: Added _OSI(Processor Device) [ 0.364083] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.364083] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364083] ACPI: Added _OSI(Linux-Dell-Video) [ 0.364083] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.364083] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.443574] ACPI: 22 ACPI AML tables successfully acquired and loaded [ 0.454860] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.471525] ACPI: Dynamic OEM Table Load: [ 0.471552] ACPI: SSDT 0xFFFF925A8C338000 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.472605] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.473999] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CAP1] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20190215/dsopcode-203) [ 0.474013] No Local Variables are initialized for Method [_OSC] [ 0.474014] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 0.474015] Arg0: 00000000eed6605f Buffer(16) 6E B0 11 08 27 4A F9 44 [ 0.474023] Arg1: 000000002b38aca0 Integer 0000000000000001 [ 0.474026] Arg2: 000000001406dc0d Integer 0000000000000002 [ 0.474029] Arg3: 000000005c5596a5 Buffer(8) 01 00 00 00 FF 10 00 00 [ 0.474036] ACPI Error: Aborting method \_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-531) [ 0.474877] ACPI: Dynamic OEM Table Load: [ 0.474893] ACPI: SSDT 0xFFFF925A8BFA6800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.476692] ACPI: Dynamic OEM Table Load: [ 0.476710] ACPI: SSDT 0xFFFF925A8BF91000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.479122] ACPI: Dynamic OEM Table Load: [ 0.479137] ACPI: SSDT 0xFFFF925A8BFA2800 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.485123] ACPI: EC: EC started [ 0.485124] ACPI: EC: interrupt blocked [ 0.505078] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.505081] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.505082] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.505083] ACPI: Interpreter enabled [ 0.505176] ACPI: (supports S0 S3 S4 S5) [ 0.505177] ACPI: Using IOAPIC for interrupt routing [ 0.505252] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.506793] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.522736] ACPI: Power Resource [WRST] (on) [ 0.525088] ACPI: Power Resource [PXP] (off) [ 0.554466] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.554475] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.554900] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER] [ 0.555299] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 0.555300] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.559486] PCI host bridge to bus 0000:00 [ 0.559490] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.559491] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.559493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.559494] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.559496] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.559497] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.559498] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.559500] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.559501] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.559502] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.559503] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.559505] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.559506] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.559507] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.559509] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.559510] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.559511] pci_bus 0000:00: root bus resource [mem 0x9e800000-0xefffffff window] [ 0.559513] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1fffffffff window] [ 0.559514] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.559516] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.559529] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.561136] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.561155] pci 0000:00:02.0: reg 0x10: [mem 0x1ff2000000-0x1ff2ffffff 64bit] [ 0.561165] pci 0000:00:02.0: reg 0x18: [mem 0x1fc0000000-0x1fcfffffff 64bit pref] [ 0.561171] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.561196] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.562825] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.562844] pci 0000:00:04.0: reg 0x10: [mem 0x1ff3010000-0x1ff3017fff 64bit] [ 0.564571] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.564599] pci 0000:00:14.0: reg 0x10: [mem 0xb6220000-0xb622ffff 64bit] [ 0.564679] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.566469] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.566499] pci 0000:00:14.2: reg 0x10: [mem 0x1ff3020000-0x1ff3020fff 64bit] [ 0.568238] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.568504] pci 0000:00:15.0: reg 0x10: [mem 0x1ff301f000-0x1ff301ffff 64bit] [ 0.571063] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.571329] pci 0000:00:15.1: reg 0x10: [mem 0x1ff301e000-0x1ff301efff 64bit] [ 0.573818] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.573852] pci 0000:00:16.0: reg 0x10: [mem 0x1ff301d000-0x1ff301dfff 64bit] [ 0.573948] pci 0000:00:16.0: PME# supported from D3hot [ 0.575689] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.575715] pci 0000:00:17.0: reg 0x10: [mem 0xb6234000-0xb6235fff] [ 0.575727] pci 0000:00:17.0: reg 0x14: [mem 0xb6237000-0xb62370ff] [ 0.575739] pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087] [ 0.575750] pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b] [ 0.575760] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f] [ 0.575769] pci 0000:00:17.0: reg 0x24: [mem 0xb6236000-0xb62367ff] [ 0.575831] pci 0000:00:17.0: PME# supported from D3hot [ 0.577485] pci 0000:00:1c.0: [8086:9d13] type 01 class 0x060400 [ 0.577610] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.579359] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.579482] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.581213] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.582936] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.582956] pci 0000:00:1f.2: reg 0x10: [mem 0xb6230000-0xb6233fff] [ 0.584631] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 0.584665] pci 0000:00:1f.3: reg 0x10: [mem 0x1ff3018000-0x1ff301bfff 64bit] [ 0.584697] pci 0000:00:1f.3: reg 0x20: [mem 0x1ff3000000-0x1ff300ffff 64bit] [ 0.584763] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.586623] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.586681] pci 0000:00:1f.4: reg 0x10: [mem 0x1ff301c000-0x1ff301c0ff 64bit] [ 0.586735] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.588428] pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000 [ 0.588460] pci 0000:00:1f.6: reg 0x10: [mem 0xb6200000-0xb621ffff] [ 0.588585] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.590699] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [ 0.590803] pci 0000:01:00.0: reg 0x10: [mem 0xb6100000-0xb6101fff 64bit] [ 0.591383] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.592310] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.592316] pci 0000:00:1c.0: bridge window [mem 0xb6100000-0xb61fffff] [ 0.592436] pci 0000:00:1c.4: PCI bridge to [bus 02-3a] [ 0.592444] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb60fffff] [ 0.592453] pci 0000:00:1c.4: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 0.596630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.596747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.596860] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.596972] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.597083] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.597194] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.597305] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.597416] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.598453] ACPI: EC: interrupt unblocked [ 0.598467] ACPI: EC: event unblocked [ 0.598477] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.598479] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.598597] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.598597] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.598597] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.598597] vgaarb: loaded [ 0.598597] SCSI subsystem initialized [ 0.598597] libata version 3.00 loaded. [ 0.598597] ACPI: bus type USB registered [ 0.598597] usbcore: registered new interface driver usbfs [ 0.598597] usbcore: registered new interface driver hub [ 0.598597] usbcore: registered new device driver usb [ 0.598597] pps_core: LinuxPPS API ver. 1 registered [ 0.598597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.598597] PTP clock support registered [ 0.598597] EDAC MC: Ver: 3.0.0 [ 0.598597] Registered efivars operations [ 0.646244] PCI: Using ACPI for IRQ routing [ 0.658584] PCI: pci_cache_line_size set to 64 bytes [ 0.659279] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.659280] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.659281] e820: reserve RAM buffer [mem 0x8606b000-0x87ffffff] [ 0.659283] e820: reserve RAM buffer [mem 0x96f9b000-0x97ffffff] [ 0.659284] e820: reserve RAM buffer [mem 0x45f800000-0x45fffffff] [ 0.659409] NetLabel: Initializing [ 0.659410] NetLabel: domain hash size = 128 [ 0.659411] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.659430] NetLabel: unlabeled traffic allowed by default [ 0.659449] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.659449] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.662076] clocksource: Switched to clocksource tsc-early [ 0.678537] VFS: Disk quotas dquot_6.6.0 [ 0.678558] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.678590] *** VALIDATE hugetlbfs *** [ 0.678699] AppArmor: AppArmor Filesystem Enabled [ 0.678731] pnp: PnP ACPI init [ 0.679038] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.679040] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.679042] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.679045] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.679046] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.679053] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.679717] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.679722] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.680119] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.680121] system 00:02: [io 0xffff] has been reserved [ 0.680123] system 00:02: [io 0xffff] has been reserved [ 0.680124] system 00:02: [io 0xffff] has been reserved [ 0.680126] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.680128] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.680132] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.680354] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.680417] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.680421] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.680450] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 0.680477] pnp 00:06: Plug and Play ACPI device, IDs SYN3071 SYN0002 PNP0f13 (active) [ 0.680599] system 00:07: [io 0x0200-0x027f] has been reserved [ 0.680602] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved [ 0.680606] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.683217] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved [ 0.683219] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved [ 0.683223] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.684485] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved [ 0.684490] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.685099] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.685100] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.685102] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.685104] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.685106] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.685107] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.685109] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.685111] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 0.685113] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.685114] system 00:0a: [mem 0x9e800000-0x9e81ffff] has been reserved [ 0.685119] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.685958] pnp: PnP ACPI: found 11 devices [ 0.692261] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.692270] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000 [ 0.692279] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 0.692283] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.692294] pci 0000:00:1c.0: bridge window [mem 0xb6100000-0xb61fffff] [ 0.692304] pci 0000:00:1c.4: PCI bridge to [bus 02-3a] [ 0.692311] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.692315] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb60fffff] [ 0.692322] pci 0000:00:1c.4: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 0.692331] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.692333] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.692334] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.692336] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.692337] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.692339] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.692340] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.692341] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.692343] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.692344] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.692346] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.692347] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.692348] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.692350] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.692351] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.692352] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.692354] pci_bus 0000:00: resource 20 [mem 0x9e800000-0xefffffff window] [ 0.692355] pci_bus 0000:00: resource 21 [mem 0x1c00000000-0x1fffffffff window] [ 0.692357] pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window] [ 0.692359] pci_bus 0000:01: resource 1 [mem 0xb6100000-0xb61fffff] [ 0.692360] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.692362] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xb60fffff] [ 0.692363] pci_bus 0000:02: resource 2 [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 0.692640] NET: Registered protocol family 2 [ 0.692824] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.692906] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.693154] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.693386] TCP: Hash tables configured (established 131072 bind 65536) [ 0.693438] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.693504] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.693634] NET: Registered protocol family 1 [ 0.693640] NET: Registered protocol family 44 [ 0.693654] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.693667] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 0.694448] PCI: CLS 0 bytes, default 64 [ 0.694494] Unpacking initramfs... [ 1.551771] Freeing initrd memory: 36472K [ 1.551845] DMAR: ACPI device "device:77" under DMAR at fed91000 as 00:15.0 [ 1.551849] DMAR: ACPI device "device:78" under DMAR at fed91000 as 00:15.1 [ 1.566130] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.566132] software IO TLB: mapped [mem 0x8efb3000-0x92fb3000] (64MB) [ 1.566410] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 1.566434] clocksource: Switched to clocksource tsc [ 1.566606] check: Scanning for low memory corruption every 60 seconds [ 1.569059] Initialise system trusted keyrings [ 1.569069] Key type blacklist registered [ 1.569114] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.571038] zbud: loaded [ 1.571697] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.571916] fuse init (API version 7.29) [ 1.625422] Key type asymmetric registered [ 1.625424] Asymmetric key parser 'x509' registered [ 1.625441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.625496] io scheduler mq-deadline registered [ 1.626730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.626828] efifb: probing for efifb [ 1.626849] efifb: framebuffer at 0x1fc0000000, using 8128k, total 8128k [ 1.626851] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.626851] efifb: scrolling: redraw [ 1.626853] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.626969] Console: switching to colour frame buffer device 240x67 [ 1.633004] fb0: EFI VGA frame buffer device [ 1.633016] intel_idle: MWAIT substates: 0x11142120 [ 1.633018] intel_idle: v0.4.1 model 0x8E [ 1.633655] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.634061] ACPI: AC Adapter [AC] (on-line) [ 1.634190] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.634199] ACPI: Sleep Button [SLPB] [ 1.634240] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.634247] ACPI: Lid Switch [LID] [ 1.634289] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.634297] ACPI: Power Button [PWRB] [ 1.634341] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.634358] ACPI: Power Button [PWRF] [ 1.635506] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.635507] ACPI: Thermal Zone [HEPZ] (30 C) [ 1.644088] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.644090] ACPI: Thermal Zone [CPUZ] (44 C) [ 1.652888] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.652889] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.657635] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.657637] ACPI: Thermal Zone [EXTZ] (37 C) [ 1.662969] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.662971] ACPI: Thermal Zone [LOCZ] (37 C) [ 1.671098] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.671099] ACPI: Thermal Zone [BATZ] (30 C) [ 1.676270] thermal LNXTHERM:06: registered as thermal_zone6 [ 1.676272] ACPI: Thermal Zone [CHGZ] (40 C) [ 1.681469] thermal LNXTHERM:07: registered as thermal_zone7 [ 1.681471] ACPI: Thermal Zone [PCHZ] (0 C) [ 1.681827] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.684950] Linux agpgart interface v0.103 [ 1.689347] tpm_tis IFX0763:00: 2.0 TPM (device-id 0x1B, rev-id 16) [ 1.704002] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.714717] loop: module loaded [ 1.715049] libphy: Fixed MDIO Bus: probed [ 1.715050] tun: Universal TUN/TAP device driver, 1.6 [ 1.715145] PPP generic driver version 2.4.2 [ 1.715241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.715244] ehci-pci: EHCI PCI platform driver [ 1.715258] ehci-platform: EHCI generic platform driver [ 1.715274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.715276] ohci-pci: OHCI PCI platform driver [ 1.715288] ohci-platform: OHCI generic platform driver [ 1.715298] uhci_hcd: USB Universal Host Controller Interface driver [ 1.715635] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.715642] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.717237] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.717246] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.717489] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 1.717491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.717493] usb usb1: Product: xHCI Host Controller [ 1.717494] usb usb1: Manufacturer: Linux 5.1.0-050100rc5-generic xhci-hcd [ 1.717495] usb usb1: SerialNumber: 0000:00:14.0 [ 1.717670] hub 1-0:1.0: USB hub found [ 1.717691] hub 1-0:1.0: 12 ports detected [ 1.719144] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.719148] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.719152] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.719202] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 [ 1.719204] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.719205] usb usb2: Product: xHCI Host Controller [ 1.719207] usb usb2: Manufacturer: Linux 5.1.0-050100rc5-generic xhci-hcd [ 1.719208] usb usb2: SerialNumber: 0000:00:14.0 [ 1.719385] hub 2-0:1.0: USB hub found [ 1.719401] hub 2-0:1.0: 6 ports detected [ 1.720076] usb: port power management may be unreliable [ 1.720729] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.721295] i8042: Detected active multiplexing controller, rev 1.1 [ 1.721488] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.721494] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.721531] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.721556] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.721579] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.721805] mousedev: PS/2 mouse device common for all mice [ 1.722089] rtc_cmos 00:03: RTC can wake from S4 [ 1.722564] rtc_cmos 00:03: registered as rtc0 [ 1.722585] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.722594] i2c /dev entries driver [ 1.722651] device-mapper: uevent: version 1.0.3 [ 1.722724] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 1.722748] platform eisa.0: Probing EISA bus 0 [ 1.722751] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.722752] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.722754] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.722755] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.722756] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.722758] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.722759] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.722760] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.722761] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.722763] platform eisa.0: EISA: Detected 0 cards [ 1.722767] intel_pstate: Intel P-state driver initializing [ 1.723491] intel_pstate: HWP enabled [ 1.723672] ledtrig-cpu: registered to indicate activity on CPUs [ 1.723674] EFI Variables Facility v0.08 2004-May-17 [ 1.747275] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.772928] intel_pmc_core: initialized [ 1.773084] NET: Registered protocol family 10 [ 1.776667] Segment Routing with IPv6 [ 1.776679] NET: Registered protocol family 17 [ 1.776700] Key type dns_resolver registered [ 1.777041] RAS: Correctable Errors collector initialized. [ 1.777068] microcode: sig=0x806ea, pf=0x80, revision=0x96 [ 1.777280] microcode: Microcode Update Driver: v2.2. [ 1.777287] sched_clock: Marking stable (1780368047, -3090381)->(1792911992, -15634326) [ 1.777620] registered taskstats version 1 [ 1.777628] Loading compiled-in X.509 certificates [ 1.778689] Loaded X.509 cert 'Build time autogenerated kernel key: 2bb4cfd8c441c5350b74ba0e11fe4683a9380c66' [ 1.778703] zswap: loaded using pool lzo/zbud [ 1.782602] Key type big_key registered [ 1.790422] Key type trusted registered [ 1.792714] Key type encrypted registered [ 1.792716] AppArmor: AppArmor sha1 policy hashing enabled [ 1.792727] ima: Allocated hash algorithm: sha1 [ 1.828419] No architecture policies found [ 1.828472] evm: Initialising EVM extended attributes: [ 1.828476] evm: security.selinux [ 1.828479] evm: security.SMACK64 [ 1.828481] evm: security.SMACK64EXEC [ 1.828484] evm: security.SMACK64TRANSMUTE [ 1.828486] evm: security.SMACK64MMAP [ 1.828488] evm: security.apparmor [ 1.828491] evm: security.ima [ 1.828493] evm: security.capability [ 1.828497] evm: HMAC attrs: 0x1 [ 1.829560] PM: Magic number: 15:384:580 [ 1.829593] pci_bus 0000:01: hash matches [ 1.829777] rtc_cmos 00:03: setting system clock to 2019-04-16T11:35:09 UTC (1555414509) [ 1.830797] Freeing unused decrypted memory: 2040K [ 1.831189] Freeing unused kernel image memory: 2572K [ 1.850506] Write protecting the kernel read-only data: 22528k [ 1.851115] Freeing unused kernel image memory: 2012K [ 1.851480] Freeing unused kernel image memory: 1772K [ 1.858301] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.858303] x86/mm: Checking user space page tables [ 1.864908] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.864910] Run /init as init process [ 1.927860] hidraw: raw HID events driver (C) Jiri Kosina [ 1.929967] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.932229] ahci 0000:00:17.0: version 3.0 [ 1.932502] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode [ 1.932504] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.933791] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.933791] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.933977] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.938749] scsi host0: ahci [ 1.942123] scsi host1: ahci [ 1.946724] scsi host2: ahci [ 1.946776] ata1: DUMMY [ 1.946776] ata2: DUMMY [ 1.946782] ata3: SATA max UDMA/133 abar m2048@0xb6236000 port 0xb6236200 irq 123 [ 2.027515] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.055186] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.090491] usb 2-1: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.40 [ 2.090493] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.090494] usb 2-1: Product: 4-Port USB 3.0 Hub [ 2.090495] usb 2-1: Manufacturer: Generic [ 2.103267] hub 2-1:1.0: USB hub found [ 2.105088] hub 2-1:1.0: 2 ports detected [ 2.114683] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f4:39:09:7a:4a:82 [ 2.114685] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.114765] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 2.210481] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.261674] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.262355] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 2.262357] ata3.00: supports DRM functions and may not be fully accessible [ 2.263996] ata3.00: ATA-10: MTFDDAV256TBN-1AR15ABHA, HPC0T14, max UDMA/100 [ 2.263998] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.268069] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 2.268071] ata3.00: supports DRM functions and may not be fully accessible [ 2.272736] ata3.00: configured for UDMA/100 [ 2.283531] scsi 2:0:0:0: Direct-Access ATA MTFDDAV256TBN-1A 0T14 PQ: 0 ANSI: 5 [ 2.283921] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.284305] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.284307] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.284361] sd 2:0:0:0: [sda] Write Protect is off [ 2.284362] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.284474] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.288314] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 2.289234] sd 2:0:0:0: [sda] supports TCG Opal [ 2.289234] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.375410] usb 1-1: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.40 [ 2.375412] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.375413] usb 1-1: Product: 4-Port USB 2.0 Hub [ 2.375413] usb 1-1: Manufacturer: Generic [ 2.377836] hub 1-1:1.0: USB hub found [ 2.378843] hub 1-1:1.0: 4 ports detected [ 2.510121] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 2.742643] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd [ 2.830939] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10 [ 2.850449] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 2.850451] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.850452] usb 1-1.1: Product: Dell KB216 Wired Keyboard [ 2.867404] usb 1-2: New USB device found, idVendor=0b0e, idProduct=0343, bcdDevice= 1.20 [ 2.867406] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.867407] usb 1-2: Product: Jabra UC VOICE 150a [ 2.867408] usb 1-2: Manufacturer: Jabra [ 2.867408] usb 1-2: SerialNumber: 151512160174 [ 2.938476] usb 1-1.2: new low-speed USB device number 5 using xhci_hcd [ 3.048471] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=1198, bcdDevice= 7.04 [ 3.048473] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.048474] usb 1-1.2: Product: HP USB 1000dpi Laser Mouse [ 3.048475] usb 1-1.2: Manufacturer: HP [ 3.166620] usb 1-7: new full-speed USB device number 6 using xhci_hcd [ 3.316774] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10 [ 3.316775] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.446369] usb 1-8: new full-speed USB device number 7 using xhci_hcd [ 3.596927] usb 1-8: New USB device found, idVendor=138a, idProduct=00ab, bcdDevice= 1.64 [ 3.596928] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.596929] usb 1-8: SerialNumber: 5579b886d4b0 [ 3.613605] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4736] [ 3.645826] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1114..] [ 3.645831] psmouse serio3: synaptics: Your touchpad (PNP: SYN3071 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 3.704614] psmouse serio3: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00123/0x840300/0x12e800/0x500000, board id: 3352, fw id: 2727989 [ 3.730388] usb 1-9: new high-speed USB device number 8 using xhci_hcd [ 3.741827] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11 [ 3.900988] usb 1-9: New USB device found, idVendor=05c8, idProduct=03b1, bcdDevice= 1.05 [ 3.900989] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.900990] usb 1-9: Product: HP HD Camera [ 3.900991] usb 1-9: Manufacturer: Generic [ 3.900991] usb 1-9: SerialNumber: 0001 [ 4.088371] usbcore: registered new interface driver usbhid [ 4.088372] usbhid: USB HID core driver [ 4.090464] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2113.0001/input/input13 [ 4.150745] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-1.1/input0 [ 4.150855] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:413C:2113.0002/input/input14 [ 4.210718] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:413C:2113.0002/input/input15 [ 4.210767] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-1.1/input1 [ 4.210859] input: HP HP USB 1000dpi Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:1198.0004/input/input16 [ 4.210936] hid-generic 0003:03F0:1198.0004: input,hidraw2: USB HID v2.00 Mouse [HP HP USB 1000dpi Laser Mouse] on usb-0000:00:14.0-1.2/input0 [ 4.211013] hid-generic 0003:03F0:1198.0005: hiddev0,hidraw3: USB HID v2.00 Device [HP HP USB 1000dpi Laser Mouse] on usb-0000:00:14.0-1.2/input1 [ 4.212341] input: Jabra Jabra UC VOICE 150a as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:0B0E:0343.0003/input/input17 [ 4.270779] jabra 0003:0B0E:0343.0003: input,hiddev1,hidraw4: USB HID v1.00 Device [Jabra Jabra UC VOICE 150a] on usb-0000:00:14.0-2/input3 [ 4.308118] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.545322] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.562872] systemd[1]: Detected architecture x86-64. [ 4.566338] systemd[1]: Set hostname to . [ 4.702708] systemd[1]: Created slice User and Session Slice. [ 4.702887] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.702899] systemd[1]: Reached target Remote File Systems. [ 4.702927] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.702934] systemd[1]: Reached target User and Group Name Lookups. [ 4.703139] systemd[1]: Created slice System Slice. [ 4.703200] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.719575] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 4.727177] lp: driver loaded but no devices found [ 4.731140] ppdev: user-space parallel port driver [ 4.774118] systemd-journald[355]: Received request to flush runtime journal from PID 1 [ 4.786921] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 5.083583] input: HP Wireless hotkeys as /devices/virtual/input/input18 [ 5.130738] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 5.133665] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 5.134627] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 5.135809] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.136643] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.139136] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 5.152089] Bluetooth: Core ver 2.22 [ 5.152136] NET: Registered protocol family 31 [ 5.152139] Bluetooth: HCI device and connection manager initialized [ 5.152159] Bluetooth: HCI socket layer initialized [ 5.152163] Bluetooth: L2CAP socket layer initialized [ 5.152167] Bluetooth: SCO socket layer initialized [ 5.161555] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 5.164765] Intel(R) Wireless WiFi driver for Linux [ 5.164766] Copyright(c) 2003- 2015 Intel Corporation [ 5.165152] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 5.166495] media: Linux media interface: v0.10 [ 5.179701] hp_wmi: query 0x4 returned error 0x5 [ 5.182131] videodev: Linux video capture interface: v2.00 [ 5.182409] usbcore: registered new interface driver btusb [ 5.183429] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 5.184433] hp_wmi: query 0x4 returned error 0x5 [ 5.184442] Bluetooth: hci0: Device revision is 16 [ 5.184443] Bluetooth: hci0: Secure boot is enabled [ 5.184443] Bluetooth: hci0: OTP lock is enabled [ 5.184444] Bluetooth: hci0: API lock is enabled [ 5.184444] Bluetooth: hci0: Debug lock is disabled [ 5.184445] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.187741] hp_wmi: query 0xd returned error 0x5 [ 5.187784] input: HP WMI hotkeys as /devices/virtual/input/input19 [ 5.200231] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 5.200529] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 5.204284] i2c_hid i2c-SYNA3071:00: i2c-SYNA3071:00 supply vdd not found, using dummy regulator [ 5.204295] i2c_hid i2c-SYNA3071:00: i2c-SYNA3071:00 supply vddl not found, using dummy regulator [ 5.206600] iwlwifi 0000:01:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm [ 5.210389] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 5.230652] input: SYNA3071:00 06CB:82F1 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA3071:00/0018:06CB:82F1.0006/input/input20 [ 5.230763] input: SYNA3071:00 06CB:82F1 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA3071:00/0018:06CB:82F1.0006/input/input21 [ 5.230835] hid-generic 0018:06CB:82F1.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA3071:00 06CB:82F1] on i2c-SYNA3071:00 [ 5.235061] uvcvideo: Found UVC 1.00 device HP HD Camera (05c8:03b1) [ 5.239032] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized! [ 5.239035] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized! [ 5.239036] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized! [ 5.240222] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input23 [ 5.240378] usbcore: registered new interface driver uvcvideo [ 5.240379] USB Video Class driver (1.1.1) [ 5.241245] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 5.241246] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.241246] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.241247] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.241247] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.241247] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 5.241268] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 5.255282] cryptd: max_cpu_qlen set to 1000 [ 5.256645] checking generic (1fc0000000 7f0000) vs hw (1fc0000000 10000000) [ 5.256648] fb0: switching to inteldrmfb from EFI VGA [ 5.256693] Console: switching to colour dummy device 80x25 [ 5.258433] i915 0000:00:02.0: vgaarb: deactivate vga console [ 5.260195] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.260196] [drm] Driver supports precise vblank timestamp query. [ 5.261026] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.263058] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.264285] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 5.267813] AVX2 version of gcm_enc/dec engaged. [ 5.267814] AES CTR mode by8 optimization enabled [ 5.277763] usb 1-2: 1:1: cannot get freq at ep 0x81 [ 5.280192] usb 1-2: 2:1: cannot get freq at ep 0x1 [ 5.292553] usb 1-2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 5.292555] usb 1-2: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/4096/1 [ 5.296012] usbcore: registered new interface driver snd-usb-audio [ 5.302893] iwlwifi 0000:01:00.0: base HW address: 34:e1:2d:31:ef:3e [ 5.303187] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0 [ 5.306710] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.307218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24 [ 5.307363] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.350919] snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing. [ 5.351342] snd_hda_codec_conexant hdaudioC0D0: action: 0 gpio_led: 0 [ 5.351505] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 5.351506] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 5.351507] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 5.351508] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 5.351509] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 5.351510] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 5.351511] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 5.351512] snd_hda_codec_conexant hdaudioC0D0: Line=0x18 [ 5.352673] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 5.352674] snd_hda_codec_conexant hdaudioC0D0: action: 1 gpio_led: 0 [ 5.357609] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0 [ 5.367245] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 5.367298] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 5.367347] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 5.367400] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 5.367447] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 5.367491] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 5.367534] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 5.367580] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32 [ 5.367625] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33 [ 5.398152] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.398436] thermal thermal_zone13: failed to read out thermal zone (-61) [ 5.441642] intel_rapl: Found RAPL domain package [ 5.441644] intel_rapl: Found RAPL domain core [ 5.441645] intel_rapl: Found RAPL domain uncore [ 5.610276] input: SYNA3071:00 06CB:82F1 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA3071:00/0018:06CB:82F1.0006/input/input35 [ 5.610359] hid-multitouch 0018:06CB:82F1.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA3071:00 06CB:82F1] on i2c-SYNA3071:00 [ 5.650617] fbcon: inteldrmfb (fb0) is primary device [ 5.681110] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0 [ 6.061585] audit: type=1400 audit(1555414513.728:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=854 comm="apparmor_parser" [ 6.063065] audit: type=1400 audit(1555414513.732:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=851 comm="apparmor_parser" [ 6.073578] audit: type=1400 audit(1555414513.740:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=849 comm="apparmor_parser" [ 6.114669] audit: type=1400 audit(1555414513.784:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=847 comm="apparmor_parser" [ 6.114853] audit: type=1400 audit(1555414513.784:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=847 comm="apparmor_parser" [ 6.115133] audit: type=1400 audit(1555414513.784:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=847 comm="apparmor_parser" [ 6.151082] audit: type=1400 audit(1555414513.820:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=859 comm="apparmor_parser" [ 6.165998] audit: type=1400 audit(1555414513.832:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=862 comm="apparmor_parser" [ 6.211449] audit: type=1400 audit(1555414513.880:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=853 comm="apparmor_parser" [ 6.211708] audit: type=1400 audit(1555414513.880:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser" [ 6.578781] Bluetooth: hci0: Waiting for firmware download to complete [ 6.579417] Bluetooth: hci0: Firmware loaded in 1364250 usecs [ 6.579443] Bluetooth: hci0: Waiting for device to boot [ 6.591471] Bluetooth: hci0: Device booted in 11755 usecs [ 6.595363] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 6.598549] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.785577] Console: switching to colour frame buffer device 240x67 [ 6.804855] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 9.543679] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.543680] Bluetooth: BNEP filters: protocol multicast [ 9.543682] Bluetooth: BNEP socket layer initialized [ 11.459541] usb 1-2: 2:1: cannot get freq at ep 0x1 [ 11.516799] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0 [ 11.565894] kauditd_printk_skb: 49 callbacks suppressed [ 11.565895] audit: type=1400 audit(1555414519.232:61): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=1600 comm="apparmor_parser" [ 11.623648] audit: type=1400 audit(1555414519.292:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=1651 comm="apparmor_parser" [ 12.309037] audit: type=1400 audit(1555414519.976:63): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=1650 comm="apparmor_parser" [ 12.328140] audit: type=1400 audit(1555414519.996:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.skype" pid=1706 comm="apparmor_parser" [ 12.328142] audit: type=1400 audit(1555414519.996:65): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.skype.skype" pid=1707 comm="apparmor_parser" [ 12.338888] audit: type=1400 audit(1555414520.008:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.concentration" pid=1715 comm="apparmor_parser" [ 12.338890] audit: type=1400 audit(1555414520.008:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.concentration.concentration" pid=1716 comm="apparmor_parser" [ 12.386324] audit: type=1400 audit(1555414520.056:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gitkraken.gitkraken" pid=1725 comm="apparmor_parser" [ 12.813348] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.813426] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.954614] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400 [ 12.954739] pci 0000:02:00.0: enabling Extended Tags [ 12.954840] pci 0000:02:00.0: supports D1 D2 [ 12.954841] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.954903] pci 0000:02:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 12.955139] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400 [ 12.955204] pci 0000:03:00.0: enabling Extended Tags [ 12.955297] pci 0000:03:00.0: supports D1 D2 [ 12.955298] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.955428] pci 0000:03:01.0: [8086:15da] type 01 class 0x060400 [ 12.955491] pci 0000:03:01.0: enabling Extended Tags [ 12.955583] pci 0000:03:01.0: supports D1 D2 [ 12.955584] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.955683] pci 0000:03:02.0: [8086:15da] type 01 class 0x060400 [ 12.955746] pci 0000:03:02.0: enabling Extended Tags [ 12.955834] pci 0000:03:02.0: supports D1 D2 [ 12.955835] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.955968] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 12.955977] pci 0000:02:00.0: bridge window [mem 0xa0000000-0xb60fffff] [ 12.955983] pci 0000:02:00.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 12.956043] pci 0000:04:00.0: [8086:15d9] type 00 class 0x088000 [ 12.956076] pci 0000:04:00.0: reg 0x10: [mem 0xb6000000-0xb603ffff] [ 12.956088] pci 0000:04:00.0: reg 0x14: [mem 0xb6040000-0xb6040fff] [ 12.956147] pci 0000:04:00.0: enabling Extended Tags [ 12.956251] pci 0000:04:00.0: supports D1 D2 [ 12.956251] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.956407] pci 0000:03:00.0: PCI bridge to [bus 04] [ 12.956415] pci 0000:03:00.0: bridge window [mem 0xb6000000-0xb60fffff] [ 12.956467] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 12.956475] pci 0000:03:01.0: bridge window [mem 0xa0000000-0xb5efffff] [ 12.956481] pci 0000:03:01.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 12.956561] pci 0000:3a:00.0: [8086:15db] type 00 class 0x0c0330 [ 12.956598] pci 0000:3a:00.0: reg 0x10: [mem 0xb5f00000-0xb5f0ffff] [ 12.956782] pci 0000:3a:00.0: supports D1 D2 [ 12.956783] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.956845] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 12.956971] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 12.956979] pci 0000:03:02.0: bridge window [mem 0xb5f00000-0xb5ffffff] [ 12.957008] pci_bus 0000:03: Allocating resources [ 12.957027] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 12.957029] pci 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000 [ 12.957031] pci 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000 [ 12.957034] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000 [ 12.957051] pci 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 12.957053] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 12.957054] pci 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 12.957055] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 12.957059] pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 12.957060] pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 12.957061] pci 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 12.957062] pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 12.957063] pci 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 12.957064] pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 12.957067] pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 12.957068] pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 12.957069] pci 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 12.957069] pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 12.957071] pci 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 12.957071] pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 12.957073] pci 0000:03:00.0: PCI bridge to [bus 04] [ 12.957079] pci 0000:03:00.0: bridge window [mem 0xb6000000-0xb60fffff] [ 12.957087] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 12.957092] pci 0000:03:01.0: bridge window [mem 0xa0000000-0xb5efffff] [ 12.957095] pci 0000:03:01.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 12.957101] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 12.957105] pci 0000:03:02.0: bridge window [mem 0xb5f00000-0xb5ffffff] [ 12.957113] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 12.957117] pci 0000:02:00.0: bridge window [mem 0xa0000000-0xb60fffff] [ 12.957121] pci 0000:02:00.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 12.998911] xhci_hcd 0000:3a:00.0: xHCI Host Controller [ 12.998918] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3 [ 13.002851] xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 13.003090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 13.003091] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.003093] usb usb3: Product: xHCI Host Controller [ 13.003094] usb usb3: Manufacturer: Linux 5.1.0-050100rc5-generic xhci-hcd [ 13.003095] usb usb3: SerialNumber: 0000:3a:00.0 [ 13.003250] hub 3-0:1.0: USB hub found [ 13.003259] hub 3-0:1.0: 2 ports detected [ 13.003944] xhci_hcd 0000:3a:00.0: xHCI Host Controller [ 13.003947] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4 [ 13.003950] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 13.003989] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 [ 13.003990] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.003991] usb usb4: Product: xHCI Host Controller [ 13.003992] usb usb4: Manufacturer: Linux 5.1.0-050100rc5-generic xhci-hcd [ 13.003993] usb usb4: SerialNumber: 0000:3a:00.0 [ 13.004110] hub 4-0:1.0: USB hub found [ 13.004118] hub 4-0:1.0: 2 ports detected [ 13.022589] pci_bus 0000:03: Allocating resources [ 13.022610] pcieport 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 13.022612] pcieport 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000 [ 13.022614] pcieport 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000 [ 13.022616] pcieport 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000 [ 13.022621] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 13.022622] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 13.022623] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 13.022624] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 13.022628] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 13.022629] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 13.022630] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 13.022631] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 13.022632] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 13.022633] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 13.022636] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 13.022637] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 13.022638] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 13.022639] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 13.022640] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 13.022641] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 13.225256] audit: type=1400 audit(1555414520.892:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gitkraken" pid=1724 comm="apparmor_parser" [ 13.287015] audit: type=1400 audit(1555414520.956:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=1921 comm="apparmor_parser" [ 13.722326] wlan0: authenticate with 70:3a:0e:87:84:32 [ 13.722334] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 13.732415] wlan0: send auth to 70:3a:0e:87:84:32 (try 1/3) [ 13.737863] wlan0: authenticated [ 13.742104] wlan0: associate with 70:3a:0e:87:84:32 (try 1/3) [ 13.743507] wlan0: RX AssocResp from 70:3a:0e:87:84:32 (capab=0x1411 status=0 aid=12) [ 13.745392] wlan0: associated [ 13.819229] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:3a:0e:87:84:32 [ 13.848037] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.982756] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 16.985408] Bridge firewalling registered [ 17.011265] bpfilter: Loaded bpfilter_umh pid 2304 [ 17.043773] Initializing XFRM netlink socket [ 17.163408] br-b9d141ee07e6: port 1(vetha34b81d) entered blocking state [ 17.163410] br-b9d141ee07e6: port 1(vetha34b81d) entered disabled state [ 17.163471] device vetha34b81d entered promiscuous mode [ 17.164381] br-b9d141ee07e6: port 1(vetha34b81d) entered blocking state [ 17.164382] br-b9d141ee07e6: port 1(vetha34b81d) entered forwarding state [ 17.164919] IPv6: ADDRCONF(NETDEV_CHANGE): br-b9d141ee07e6: link becomes ready [ 17.165018] br-b9d141ee07e6: port 1(vetha34b81d) entered disabled state [ 17.172738] br-b9d141ee07e6: port 2(veth51ba904) entered blocking state [ 17.172740] br-b9d141ee07e6: port 2(veth51ba904) entered disabled state [ 17.172829] device veth51ba904 entered promiscuous mode [ 17.172972] br-b9d141ee07e6: port 2(veth51ba904) entered blocking state [ 17.172974] br-b9d141ee07e6: port 2(veth51ba904) entered forwarding state [ 17.235880] br-b9d141ee07e6: port 3(vethed521df) entered blocking state [ 17.235884] br-b9d141ee07e6: port 3(vethed521df) entered disabled state [ 17.236813] device vethed521df entered promiscuous mode [ 17.237751] br-b9d141ee07e6: port 3(vethed521df) entered blocking state [ 17.237757] br-b9d141ee07e6: port 3(vethed521df) entered forwarding state [ 17.766734] eth0: renamed from veth396bfa3 [ 17.790432] br-b9d141ee07e6: port 2(veth51ba904) entered disabled state [ 17.790480] IPv6: ADDRCONF(NETDEV_CHANGE): vethed521df: link becomes ready [ 17.830455] eth0: renamed from vethcfa392c [ 17.850734] IPv6: ADDRCONF(NETDEV_CHANGE): vetha34b81d: link becomes ready [ 17.850875] br-b9d141ee07e6: port 1(vetha34b81d) entered blocking state [ 17.850882] br-b9d141ee07e6: port 1(vetha34b81d) entered forwarding state [ 18.762423] eth0: renamed from vethb66e327 [ 18.778623] IPv6: ADDRCONF(NETDEV_CHANGE): veth51ba904: link becomes ready [ 18.778668] br-b9d141ee07e6: port 2(veth51ba904) entered blocking state [ 18.778671] br-b9d141ee07e6: port 2(veth51ba904) entered forwarding state [ 21.303504] snd_hda_codec_conexant hdaudioC0D0: action: 2 gpio_led: 0 [ 21.552222] Bluetooth: RFCOMM TTY layer initialized [ 21.552229] Bluetooth: RFCOMM socket layer initialized [ 21.552234] Bluetooth: RFCOMM ver 1.11 [ 22.429062] rfkill: input handler disabled [ 33.418379] pci_raw_set_power_state: 4 callbacks suppressed [ 33.418382] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3 [ 33.494436] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3 [ 33.494451] xhci_hcd 0000:3a:00.0: WARN: xHC restore state timeout [ 33.494452] xhci_hcd 0000:3a:00.0: PCI post-resume error -110! [ 33.494454] xhci_hcd 0000:3a:00.0: HC died; cleaning up [ 33.494471] xhci_hcd 0000:3a:00.0: remove, state 4 [ 33.494475] usb usb4: USB disconnect, device number 1 [ 33.494716] xhci_hcd 0000:3a:00.0: USB bus 4 deregistered [ 33.494721] xhci_hcd 0000:3a:00.0: remove, state 4 [ 33.494724] usb usb3: USB disconnect, device number 1 [ 33.494937] xhci_hcd 0000:3a:00.0: Host halt failed, -19 [ 33.494939] xhci_hcd 0000:3a:00.0: Host not accessible, reset failed. [ 33.495005] xhci_hcd 0000:3a:00.0: USB bus 3 deregistered [ 34.058407] pci_bus 0000:03: Allocating resources [ 34.058447] pcieport 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 34.058456] pcieport 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000 [ 34.058465] pcieport 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000 [ 34.058473] pcieport 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000 [ 34.058485] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 34.058490] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 34.058496] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 34.058500] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 34.058519] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 34.058523] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 34.058528] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 34.058532] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 34.058536] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 34.058541] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 34.058553] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 34.058557] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 34.058561] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 34.058565] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 34.058570] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 34.058573] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 38.778819] pcieport 0000:03:00.0: Refused to change power state, currently in D3 [ 38.781063] pci_bus 0000:04: busn_res: [bus 04] is released [ 38.781128] pci_bus 0000:05: busn_res: [bus 05-39] is released [ 38.781180] pci_bus 0000:3a: busn_res: [bus 3a] is released [ 38.781272] pci_bus 0000:03: busn_res: [bus 03-3a] is released [ 38.798443] ACPI Debug: " Host router Upstream port _PS3" [ 38.803111] ACPI Debug: "SXST 0x1D cmd" [ 38.803255] ACPI Debug: "Dev gone" [ 84.699406] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400 [ 84.699464] pci 0000:02:00.0: enabling Extended Tags [ 84.699548] pci 0000:02:00.0: supports D1 D2 [ 84.699549] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 84.699597] pci 0000:02:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 84.699755] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400 [ 84.699816] pci 0000:03:00.0: enabling Extended Tags [ 84.699899] pci 0000:03:00.0: supports D1 D2 [ 84.699899] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 84.699990] pci 0000:03:01.0: [8086:15da] type 01 class 0x060400 [ 84.700054] pci 0000:03:01.0: enabling Extended Tags [ 84.700144] pci 0000:03:01.0: supports D1 D2 [ 84.700145] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 84.700251] pci 0000:03:02.0: [8086:15da] type 01 class 0x060400 [ 84.700315] pci 0000:03:02.0: enabling Extended Tags [ 84.700402] pci 0000:03:02.0: supports D1 D2 [ 84.700403] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 84.700532] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 84.700541] pci 0000:02:00.0: bridge window [mem 0xa0000000-0xb60fffff] [ 84.700547] pci 0000:02:00.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 84.700615] pci 0000:04:00.0: [8086:15d9] type 00 class 0x088000 [ 84.700648] pci 0000:04:00.0: reg 0x10: [mem 0xb6000000-0xb603ffff] [ 84.700660] pci 0000:04:00.0: reg 0x14: [mem 0xb6040000-0xb6040fff] [ 84.700719] pci 0000:04:00.0: enabling Extended Tags [ 84.700823] pci 0000:04:00.0: supports D1 D2 [ 84.700824] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 84.701020] pci 0000:03:00.0: PCI bridge to [bus 04] [ 84.701029] pci 0000:03:00.0: bridge window [mem 0xb6000000-0xb60fffff] [ 84.701095] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 84.701103] pci 0000:03:01.0: bridge window [mem 0xa0000000-0xb5efffff] [ 84.701109] pci 0000:03:01.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 84.701198] pci 0000:3a:00.0: [8086:15db] type 00 class 0x0c0330 [ 84.701233] pci 0000:3a:00.0: reg 0x10: [mem 0xb5f00000-0xb5f0ffff] [ 84.701430] pci 0000:3a:00.0: supports D1 D2 [ 84.701431] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 84.701494] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 84.701627] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 84.701636] pci 0000:03:02.0: bridge window [mem 0xb5f00000-0xb5ffffff] [ 84.701664] pci_bus 0000:03: Allocating resources [ 84.701683] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 84.701685] pci 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000 [ 84.701687] pci 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000 [ 84.701688] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000 [ 84.701691] pci 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 84.701692] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 84.701694] pci 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 84.701695] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 84.701699] pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 84.701700] pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 84.701701] pci 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 84.701702] pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 84.701704] pci 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 84.701704] pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 84.701708] pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 84.701709] pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 84.701710] pci 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 84.701711] pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 84.701712] pci 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 84.701713] pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 84.701715] pci 0000:03:00.0: PCI bridge to [bus 04] [ 84.701720] pci 0000:03:00.0: bridge window [mem 0xb6000000-0xb60fffff] [ 84.701728] pci 0000:03:01.0: PCI bridge to [bus 05-39] [ 84.701733] pci 0000:03:01.0: bridge window [mem 0xa0000000-0xb5efffff] [ 84.701736] pci 0000:03:01.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 84.701742] pci 0000:03:02.0: PCI bridge to [bus 3a] [ 84.701746] pci 0000:03:02.0: bridge window [mem 0xb5f00000-0xb5ffffff] [ 84.701755] pci 0000:02:00.0: PCI bridge to [bus 03-3a] [ 84.701759] pci 0000:02:00.0: bridge window [mem 0xa0000000-0xb60fffff] [ 84.701763] pci 0000:02:00.0: bridge window [mem 0x1fd0000000-0x1ff1ffffff 64bit pref] [ 84.841212] xhci_hcd 0000:3a:00.0: xHCI Host Controller [ 84.841217] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3 [ 84.848479] xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 84.848710] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 84.848711] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 84.848713] usb usb3: Product: xHCI Host Controller [ 84.848713] usb usb3: Manufacturer: Linux 5.1.0-050100rc5-generic xhci-hcd [ 84.848714] usb usb3: SerialNumber: 0000:3a:00.0 [ 84.848850] hub 3-0:1.0: USB hub found [ 84.848859] hub 3-0:1.0: 2 ports detected [ 84.849745] xhci_hcd 0000:3a:00.0: xHCI Host Controller [ 84.849760] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4 [ 84.849764] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 84.849794] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 [ 84.849795] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 84.849795] usb usb4: Product: xHCI Host Controller [ 84.849796] usb usb4: Manufacturer: Linux 5.1.0-050100rc5-generic xhci-hcd [ 84.849797] usb usb4: SerialNumber: 0000:3a:00.0 [ 84.849902] hub 4-0:1.0: USB hub found [ 84.849910] hub 4-0:1.0: 2 ports detected [ 84.850480] pci_bus 0000:03: Allocating resources [ 84.850498] pcieport 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 84.850499] pcieport 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000 [ 84.850501] pcieport 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000 [ 84.850503] pcieport 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000 [ 84.850506] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 84.850507] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 84.850508] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 84.850509] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 84.850514] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 84.850515] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 84.850518] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 84.850519] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 84.850519] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 84.850520] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 84.850523] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 84.850524] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 84.850525] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 84.850525] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 84.850526] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 84.850527] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 124.890672] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3 [ 124.970362] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3 [ 124.970379] xhci_hcd 0000:3a:00.0: WARN: xHC restore state timeout [ 124.970381] xhci_hcd 0000:3a:00.0: PCI post-resume error -110! [ 124.970383] xhci_hcd 0000:3a:00.0: HC died; cleaning up [ 124.970411] xhci_hcd 0000:3a:00.0: remove, state 4 [ 124.970416] usb usb4: USB disconnect, device number 1 [ 124.970631] xhci_hcd 0000:3a:00.0: USB bus 4 deregistered [ 124.970636] xhci_hcd 0000:3a:00.0: remove, state 4 [ 124.970638] usb usb3: USB disconnect, device number 1 [ 124.970811] xhci_hcd 0000:3a:00.0: Host halt failed, -19 [ 124.970813] xhci_hcd 0000:3a:00.0: Host not accessible, reset failed. [ 124.970888] xhci_hcd 0000:3a:00.0: USB bus 3 deregistered [ 125.510896] pci_bus 0000:03: Allocating resources [ 125.510927] pcieport 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000 [ 125.510932] pcieport 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000 [ 125.510937] pcieport 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000 [ 125.510942] pcieport 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 3000 [ 125.510951] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 125.510954] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 125.510957] pcieport 0000:02:00.0: BAR 13: no space for [io size 0x3000] [ 125.510960] pcieport 0000:02:00.0: BAR 13: failed to assign [io size 0x3000] [ 125.510976] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 125.510979] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 125.510982] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 125.510984] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 125.510987] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 125.510989] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 125.510996] pcieport 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 125.510999] pcieport 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 125.511001] pcieport 0000:03:02.0: BAR 13: no space for [io size 0x1000] [ 125.511004] pcieport 0000:03:02.0: BAR 13: failed to assign [io size 0x1000] [ 125.511007] pcieport 0000:03:01.0: BAR 13: no space for [io size 0x1000] [ 125.511009] pcieport 0000:03:01.0: BAR 13: failed to assign [io size 0x1000] [ 130.245223] pcieport 0000:03:00.0: Refused to change power state, currently in D3 [ 130.269292] pci_bus 0000:04: busn_res: [bus 04] is released [ 130.269506] pci_bus 0000:05: busn_res: [bus 05-39] is released [ 130.269801] pci_bus 0000:3a: busn_res: [bus 3a] is released [ 130.270227] pci_bus 0000:03: busn_res: [bus 03-3a] is released [ 130.270962] ACPI Debug: " Host router Upstream port _PS3" [ 130.274217] ACPI Debug: "SXST 0x1D cmd" [ 130.274483] ACPI Debug: "Dev gone"