[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-04-02 [ 0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-038) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 (Ubuntu 4.15.0-46.49-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=c42cdf35-bf18-4bdb-93ff-e43f92d36a4e ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8b7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8b7f000-0x00000000b9e7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9e7f000-0x00000000b9f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff990000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard /1946, BIOS L73 Ver. 01.11 04/29/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00BC000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 00BB000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back [ 0.000000] 7 base 0400000000 mask 7FC0000000 write-back [ 0.000000] 8 base 043FE00000 mask 7FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x267b3f000, 0x267b3ffff] PGTABLE [ 0.000000] BRK [0x267b40000, 0x267b40fff] PGTABLE [ 0.000000] BRK [0x267b41000, 0x267b41fff] PGTABLE [ 0.000000] BRK [0x267b42000, 0x267b42fff] PGTABLE [ 0.000000] BRK [0x267b43000, 0x267b43fff] PGTABLE [ 0.000000] BRK [0x267b44000, 0x267b44fff] PGTABLE [ 0.000000] BRK [0x267b45000, 0x267b45fff] PGTABLE [ 0.000000] BRK [0x267b46000, 0x267b46fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31189000-0x348bbfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000B9FFE120 00009C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000B9FD2000 02491B (v02 HPQOEM 1946 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000B9DE4000 000040 [ 0.000000] ACPI: FACS 0x00000000B9DE4000 000040 [ 0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 1946 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FCF000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: SLIC 0x00000000B9FCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FPDT 0x00000000B9FCB000 000044 (v01 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000B9FCA000 000038 (v00 HPQOEM 1946 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FC9000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC8000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC7000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC6000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x43fdd5000-0x43fdfffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000043fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b8b7efff] [ 0.000000] node 0: [mem 0x00000000b9fff000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fdfffff] [ 0.000000] Reserved but unavailable: 29924 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff] [ 0.000000] On node 0 totalpages: 4163868 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11758 pages used for memmap [ 0.000000] DMA32 zone: 752512 pages, LIFO batch:31 [ 0.000000] Normal zone: 53240 pages used for memmap [ 0.000000] Normal zone: 3407360 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bb200000-0x00000000bf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8b7f000-0xb9e7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9e7f000-0xb9f7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f7f000-0xb9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff98ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff990000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4098785 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=c42cdf35-bf18-4bdb-93ff-e43f92d36a4e ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16241120K/16655472K available (12300K kernel code, 2473K rwdata, 4252K rodata, 2408K init, 2416K bss, 414352K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39198 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2494.146 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.29 BogoMIPS (lpj=9976584) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.028334] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029676] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029732] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029775] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.030034] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.030035] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.030041] mce: CPU supports 7 MCE banks [ 0.030051] CPU0: Thermal monitoring enabled (TM1) [ 0.030065] process: using mwait in idle threads [ 0.030068] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.030069] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.030071] Spectre V2 : Mitigation: Full generic retpoline [ 0.030072] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.030072] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.030073] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.030074] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.038096] Freeing SMP alternatives memory: 36K [ 0.040072] TSC deadline timer enabled [ 0.040075] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.040154] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.040206] ... version: 3 [ 0.040207] ... bit width: 48 [ 0.040208] ... generic registers: 4 [ 0.040209] ... value mask: 0000ffffffffffff [ 0.040210] ... max period: 00007fffffffffff [ 0.040210] ... fixed-purpose events: 3 [ 0.040211] ... event mask: 000000070000000f [ 0.040253] Hierarchical SRCU implementation. [ 0.041842] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.041859] smp: Bringing up secondary CPUs ... [ 0.041949] x86: Booting SMP configuration: [ 0.041950] .... node #0, CPUs: #1 #2 #3 [ 0.045686] smp: Brought up 1 node, 4 CPUs [ 0.045686] smpboot: Max logical packages: 2 [ 0.045686] smpboot: Total of 4 processors activated (19953.16 BogoMIPS) [ 0.048455] devtmpfs: initialized [ 0.048455] x86/mm: Memory block size: 128MB [ 0.049606] evm: security.selinux [ 0.049606] evm: security.SMACK64 [ 0.049607] evm: security.SMACK64EXEC [ 0.049608] evm: security.SMACK64TRANSMUTE [ 0.049608] evm: security.SMACK64MMAP [ 0.049609] evm: security.apparmor [ 0.049610] evm: security.ima [ 0.049610] evm: security.capability [ 0.049628] PM: Registering ACPI NVS region [mem 0xb9e7f000-0xb9f7efff] (1048576 bytes) [ 0.049628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.049628] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.049628] pinctrl core: initialized pinctrl subsystem [ 0.049628] RTC time: 10:48:05, date: 03/16/19 [ 0.049628] NET: Registered protocol family 16 [ 0.049628] audit: initializing netlink subsys (disabled) [ 0.049628] audit: type=2000 audit(1552733284.048:1): state=initialized audit_enabled=0 res=1 [ 0.049628] cpuidle: using governor ladder [ 0.049628] cpuidle: using governor menu [ 0.049628] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.049628] ACPI: bus type PCI registered [ 0.049628] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.049628] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.049628] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.049628] PCI: Using configuration type 1 for base access [ 0.049628] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.049628] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.049628] mtrr: probably your BIOS does not setup all CPUs. [ 0.049628] mtrr: corrected configuration. [ 0.052903] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.052903] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052903] ACPI: Added _OSI(Module Device) [ 0.052903] ACPI: Added _OSI(Processor Device) [ 0.052903] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052903] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052903] ACPI: Added _OSI(Linux-Dell-Video) [ 0.052903] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.052903] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.068044] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.078648] ACPI: Dynamic OEM Table Load: [ 0.078657] ACPI: SSDT 0xFFFFA01EED29F000 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.079432] ACPI: Dynamic OEM Table Load: [ 0.079440] ACPI: SSDT 0xFFFFA01EED240000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.080287] ACPI: Dynamic OEM Table Load: [ 0.080293] ACPI: SSDT 0xFFFFA01EED2C1800 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.082008] ACPI: EC: EC started [ 0.082009] ACPI: EC: interrupt blocked [ 1.637313] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 1.637316] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.637318] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 1.637319] ACPI: Interpreter enabled [ 1.637357] ACPI: (supports S0 S3 S4 S5) [ 1.637359] ACPI: Using IOAPIC for interrupt routing [ 1.637391] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.637891] ACPI: Enabled 6 GPEs in block 00 to 7F [ 1.642116] ACPI: Power Resource [APPR] (off) [ 1.645403] ACPI: Power Resource [COMP] (on) [ 1.645889] ACPI: Power Resource [LPP] (on) [ 1.647043] ACPI: Power Resource [PXP2] (on) [ 1.769230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.769237] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.772786] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.772787] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.773739] PCI host bridge to bus 0000:00 [ 1.773742] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.773744] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.773746] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.773748] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window] [ 1.773749] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 1.773751] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 1.773753] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.773764] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 1.773948] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 1.773962] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 1.773970] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.773976] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 1.774179] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 1.774192] pci 0000:00:03.0: reg 0x10: [mem 0xd0910000-0xd0913fff 64bit] [ 1.774396] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 1.774415] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit] [ 1.774474] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.774625] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 1.774648] pci 0000:00:16.0: reg 0x10: [mem 0xd0919000-0xd091901f 64bit] [ 1.774726] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.774882] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 1.774901] pci 0000:00:1b.0: reg 0x10: [mem 0xd0914000-0xd0917fff 64bit] [ 1.774977] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.775128] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 1.775209] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.775435] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400 [ 1.775519] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.775743] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 [ 1.775827] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.776055] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 1.776140] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.776369] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 1.776392] pci 0000:00:1d.0: reg 0x10: [mem 0xd091d000-0xd091d3ff] [ 1.776488] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.776644] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 1.776911] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 1.776928] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 1.776935] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 1.776942] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 1.776949] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 1.776957] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 1.776964] pci 0000:00:1f.2: reg 0x24: [mem 0xd091c000-0xd091c7ff] [ 1.777007] pci 0000:00:1f.2: PME# supported from D3hot [ 1.777190] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.777195] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.777253] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 1.777283] pci 0000:02:00.0: reg 0x10: [mem 0xd0700000-0xd0700fff] [ 1.777434] pci 0000:02:00.0: supports D1 D2 [ 1.777435] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.788028] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.788033] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff] [ 1.788108] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 1.788139] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.788168] pci 0000:03:00.0: reg 0x18: [mem 0xd0600000-0xd0600fff 64bit] [ 1.788186] pci 0000:03:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref] [ 1.788297] pci 0000:03:00.0: supports D1 D2 [ 1.788299] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.800023] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.800026] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 1.800030] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff] [ 1.800035] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.800112] pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000 [ 1.800172] pci 0000:04:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit] [ 1.800386] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.812030] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.812035] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 1.813518] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.813604] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.813686] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.813768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.813850] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.813933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.814015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.814095] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.814658] ACPI: EC: interrupt unblocked [ 1.814667] ACPI: EC: event unblocked [ 1.814674] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.814676] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 1.814933] SCSI subsystem initialized [ 1.814973] libata version 3.00 loaded. [ 1.814973] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.814973] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.814973] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.814973] vgaarb: loaded [ 1.814973] ACPI: bus type USB registered [ 1.814973] usbcore: registered new interface driver usbfs [ 1.814973] usbcore: registered new interface driver hub [ 1.814973] usbcore: registered new device driver usb [ 1.814973] EDAC MC: Ver: 3.0.0 [ 1.814973] PCI: Using ACPI for IRQ routing [ 1.817160] PCI: pci_cache_line_size set to 64 bytes [ 1.817204] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.817206] e820: reserve RAM buffer [mem 0xb8b7f000-0xbbffffff] [ 1.817208] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 1.817209] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff] [ 1.817319] NetLabel: Initializing [ 1.817320] NetLabel: domain hash size = 128 [ 1.817320] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.817338] NetLabel: unlabeled traffic allowed by default [ 1.820375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.820382] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.822408] clocksource: Switched to clocksource hpet [ 1.833005] VFS: Disk quotas dquot_6.6.0 [ 1.833027] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.833148] AppArmor: AppArmor Filesystem Enabled [ 1.833182] pnp: PnP ACPI init [ 1.833572] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.833575] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.833577] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.833579] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.833581] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.833583] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.833585] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.833587] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.833589] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.833591] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.833599] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.833847] system 00:01: [io 0x0200-0x027f] has been reserved [ 1.833850] system 00:01: [io 0xffff] has been reserved [ 1.833852] system 00:01: [io 0xffff] has been reserved [ 1.833854] system 00:01: [io 0xffff] has been reserved [ 1.833856] system 00:01: [io 0x1800-0x18fe] has been reserved [ 1.833858] system 00:01: [io 0xef80-0xef9f] has been reserved [ 1.833863] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.833931] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.834117] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.834145] pnp 00:04: Plug and Play ACPI device, IDs SYN3005 SYN0100 SYN0002 PNP0f13 (active) [ 1.834640] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved [ 1.834642] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved [ 1.834648] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.835017] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.835047] pnp: PnP ACPI: found 7 devices [ 1.841461] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.841481] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 1.841485] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 1.841507] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.841510] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 1.841514] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.841519] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.841526] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.841528] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 1.841533] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff] [ 1.841536] pci 0000:00:1c.1: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.841542] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.841544] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 1.841549] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff] [ 1.841552] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.841558] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.841562] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 1.841570] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.841572] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.841574] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.841576] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window] [ 1.841577] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 1.841579] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 1.841581] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff] [ 1.841584] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 1.841585] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.841587] pci_bus 0000:02: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.841589] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.841591] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.841593] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.841594] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.841742] NET: Registered protocol family 2 [ 1.841975] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.842194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.842320] TCP: Hash tables configured (established 131072 bind 65536) [ 1.842369] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.842417] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.842506] NET: Registered protocol family 1 [ 1.842521] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.842531] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.843334] PCI: CLS 64 bytes, default 64 [ 1.843373] Unpacking initramfs... [ 2.899701] Freeing initrd memory: 56524K [ 2.899713] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.899717] software IO TLB [mem 0xb4b7f000-0xb8b7f000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 2.899813] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than Reserved [mem 0xfed10000-0xfed13fff] [ 2.899819] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs [ 2.900031] Scanning for low memory corruption every 60 seconds [ 2.900825] Initialise system trusted keyrings [ 2.900836] Key type blacklist registered [ 2.900870] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 2.902232] zbud: loaded [ 2.902829] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.902988] fuse init (API version 7.26) [ 2.904365] Key type asymmetric registered [ 2.904366] Asymmetric key parser 'x509' registered [ 2.904402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.904437] io scheduler noop registered [ 2.904438] io scheduler deadline registered [ 2.904467] io scheduler cfq registered (default) [ 2.905737] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 2.905759] pcieport 0000:00:1c.1: Signaling PME with IRQ 41 [ 2.905777] pcieport 0000:00:1c.2: Signaling PME with IRQ 42 [ 2.905798] pcieport 0000:00:1c.3: Signaling PME with IRQ 43 [ 2.905818] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.905903] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 2.905904] vesafb: scrolling: redraw [ 2.905906] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.905918] vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 4160k, total 4160k [ 2.906027] Console: switching to colour frame buffer device 170x48 [ 2.906048] fb0: VESA VGA frame buffer device [ 2.906064] intel_idle: MWAIT substates: 0x11142120 [ 2.906065] intel_idle: v0.4.1 model 0x45 [ 2.906279] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.906541] ACPI: AC Adapter [AC] (on-line) [ 2.906618] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.906630] ACPI: Sleep Button [SLPB] [ 2.906668] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.906675] ACPI: Lid Switch [LID] [ 2.906714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.906737] ACPI: Power Button [PWRF] [ 2.926944] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.931892] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.931894] ACPI: Thermal Zone [CPUZ] (33 C) [ 2.962075] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.962077] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.977147] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.977149] ACPI: Thermal Zone [EXTZ] (27 C) [ 2.993252] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.993255] ACPI: Thermal Zone [LOCZ] (27 C) [ 3.008376] thermal LNXTHERM:04: registered as thermal_zone4 [ 3.008378] ACPI: Thermal Zone [BATZ] (24 C) [ 3.008956] thermal LNXTHERM:05: registered as thermal_zone5 [ 3.008958] ACPI: Thermal Zone [PCHZ] (114 C) [ 3.009149] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.011412] Linux agpgart interface v0.103 [ 3.038162] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.058872] ACPI: Battery Slot [BAT0] (battery present) [ 3.159307] loop: module loaded [ 3.159498] libphy: Fixed MDIO Bus: probed [ 3.159499] tun: Universal TUN/TAP device driver, 1.6 [ 3.159540] PPP generic driver version 2.4.2 [ 3.159584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.159586] ehci-pci: EHCI PCI platform driver [ 3.159820] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.159829] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.159841] ehci-pci 0000:00:1d.0: debug port 2 [ 3.163731] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.163747] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd091d000 [ 3.176019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.176069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.176071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.176073] usb usb1: Product: EHCI Host Controller [ 3.176075] usb usb1: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 3.176077] usb usb1: SerialNumber: 0000:00:1d.0 [ 3.176212] hub 1-0:1.0: USB hub found [ 3.176218] hub 1-0:1.0: 2 ports detected [ 3.176391] ehci-platform: EHCI generic platform driver [ 3.176402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.176405] ohci-pci: OHCI PCI platform driver [ 3.176414] ohci-platform: OHCI generic platform driver [ 3.176420] uhci_hcd: USB Universal Host Controller Interface driver [ 3.176640] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.176646] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.177712] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 3.177717] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.177843] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.177845] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.177846] usb usb2: Product: xHCI Host Controller [ 3.177848] usb usb2: Manufacturer: Linux 4.15.0-46-generic xhci-hcd [ 3.177850] usb usb2: SerialNumber: 0000:00:14.0 [ 3.177967] hub 2-0:1.0: USB hub found [ 3.177978] hub 2-0:1.0: 9 ports detected [ 3.178563] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.178568] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.178572] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.178605] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.178607] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.178609] usb usb3: Product: xHCI Host Controller [ 3.178610] usb usb3: Manufacturer: Linux 4.15.0-46-generic xhci-hcd [ 3.178612] usb usb3: SerialNumber: 0000:00:14.0 [ 3.178725] hub 3-0:1.0: USB hub found [ 3.178733] hub 3-0:1.0: 4 ports detected [ 3.178972] usb: port power management may be unreliable [ 3.179085] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.181262] i8042: Detected active multiplexing controller, rev 1.1 [ 3.182004] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.182008] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.182038] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.182061] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.182083] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.182205] mousedev: PS/2 mouse device common for all mice [ 3.182374] rtc_cmos 00:02: RTC can wake from S4 [ 3.182506] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.182532] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.182540] i2c /dev entries driver [ 3.182544] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 3.182617] device-mapper: uevent: version 1.0.3 [ 3.182686] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 3.182695] intel_pstate: Intel P-state driver initializing [ 3.182903] ledtrig-cpu: registered to indicate activity on CPUs [ 3.183295] NET: Registered protocol family 10 [ 3.187360] Segment Routing with IPv6 [ 3.187379] NET: Registered protocol family 17 [ 3.187425] Key type dns_resolver registered [ 3.187666] RAS: Correctable Errors collector initialized. [ 3.187694] microcode: sig=0x40651, pf=0x40, revision=0x24 [ 3.187741] microcode: Microcode Update Driver: v2.2. [ 3.187749] sched_clock: Marking stable (3187737196, 0)->(3184815314, 2921882) [ 3.187923] registered taskstats version 1 [ 3.187931] Loading compiled-in X.509 certificates [ 3.190122] Loaded X.509 cert 'Build time autogenerated kernel key: b873a790e41754b50f7dbae45b6bd46229c3c73f' [ 3.190138] zswap: loaded using pool lzo/zbud [ 3.192943] Key type big_key registered [ 3.192946] Key type trusted registered [ 3.194194] Key type encrypted registered [ 3.194196] AppArmor: AppArmor sha1 policy hashing enabled [ 3.207585] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.215682] ima: Allocated hash algorithm: sha1 [ 3.484090] evm: HMAC attrs: 0x1 [ 3.484710] Magic number: 11:31:831 [ 3.484861] rtc_cmos 00:02: setting system clock to 2019-03-16 10:48:08 UTC (1552733288) [ 3.484937] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.484938] EDD information not available. [ 3.512049] usb 2-4: new full-speed USB device number 2 using xhci_hcd [ 3.512057] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.660942] usb 2-4: New USB device found, idVendor=8087, idProduct=07dc [ 3.660944] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.668447] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 3.668448] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.668596] hub 1-1:1.0: USB hub found [ 3.668696] hub 1-1:1.0: 8 ports detected [ 3.826899] Freeing unused kernel memory: 2408K [ 3.832097] Write protecting the kernel read-only data: 20480k [ 3.833455] Freeing unused kernel memory: 2008K [ 3.836866] Freeing unused kernel memory: 1892K [ 3.842013] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.842013] x86/mm: Checking user space page tables [ 3.847032] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.900055] tsc: Refined TSC clocksource calibration: 2494.225 MHz [ 3.900063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns [ 3.952826] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.952837] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.955158] ahci 0000:00:1f.2: version 3.0 [ 3.965471] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 28:80:23:06:2b:b9, XID 0c000800 IRQ 47 [ 3.965474] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.965552] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 3.965556] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 3.973869] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 3.976089] scsi host0: ahci [ 3.976215] scsi host1: ahci [ 3.976267] ata1: SATA max UDMA/133 abar m2048@0xd091c000 port 0xd091c100 irq 46 [ 3.976269] ata2: DUMMY [ 3.990715] [drm] Memory usable by graphics device = 2048M [ 3.990718] checking generic (c0000000 410000) vs hw (c0000000 10000000) [ 3.990719] fb: switching to inteldrmfb from VESA VGA [ 3.990741] Console: switching to colour dummy device 80x25 [ 3.990818] [drm] Replacing VGA console driver [ 3.996115] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.996117] [drm] Driver supports precise vblank timestamp query. [ 3.998213] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.024323] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 4.025595] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.025936] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12 [ 4.059154] fbcon: inteldrmfb (fb0) is primary device [ 4.059236] Console: switching to colour frame buffer device 170x48 [ 4.059265] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.148860] random: fast init done [ 4.290898] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.291722] ata1.00: NCQ Send/Recv Log not supported [ 4.291724] ata1.00: ATA-9: SAMSUNG MZ7PD128HCFV-000H1, DXM01H0Q, max UDMA/133 [ 4.291726] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.292458] ata1.00: NCQ Send/Recv Log not supported [ 4.292753] ata1.00: configured for UDMA/133 [ 4.292963] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PD128 1H0Q PQ: 0 ANSI: 5 [ 4.293151] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.293173] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.293176] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.293262] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.293329] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 4.293356] sd 0:0:0:0: [sda] Write Protect is off [ 4.293359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.293393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.293930] sda: sda1 [ 4.294249] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.785518] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [ 4.825898] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [ 4.898774] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2653, fw id: 1481159 [ 4.924296] clocksource: Switched to clocksource tsc [ 4.944825] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 6.710244] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.827963] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.834806] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.852189] systemd[1]: Detected architecture x86-64. [ 6.854538] systemd[1]: Set hostname to . [ 6.942388] systemd[1]: Reached target User and Group Name Lookups. [ 6.942696] systemd[1]: Created slice User and Session Slice. [ 6.942793] systemd[1]: Created slice System Slice. [ 6.942891] systemd[1]: Listening on Journal Audit Socket. [ 6.942941] systemd[1]: Listening on LVM2 poll daemon socket. [ 6.942989] systemd[1]: Listening on udev Control Socket. [ 6.943026] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.970470] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.974856] lp: driver loaded but no devices found [ 6.980299] ppdev: user-space parallel port driver [ 7.028876] systemd-journald[332]: Received request to flush runtime journal from PID 1 [ 7.051728] systemd-journald[332]: File /var/log/journal/1b045f61411a4a2ab4e6f2577d5f37f6/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 7.126658] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 7.165568] input: HP Wireless hotkeys as /devices/virtual/input/input13 [ 7.178349] hp_accel: laptop model unknown, using default axes configuration [ 7.271982] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.280469] audit: type=1400 audit(1552733292.287:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=459 comm="apparmor_parser" [ 7.280474] audit: type=1400 audit(1552733292.287:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser" [ 7.280477] audit: type=1400 audit(1552733292.287:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=459 comm="apparmor_parser" [ 7.280480] audit: type=1400 audit(1552733292.287:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser" [ 7.280483] audit: type=1400 audit(1552733292.287:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=461 comm="apparmor_parser" [ 7.280485] audit: type=1400 audit(1552733292.287:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=461 comm="apparmor_parser" [ 7.280488] audit: type=1400 audit(1552733292.287:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=461 comm="apparmor_parser" [ 7.280490] audit: type=1400 audit(1552733292.287:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=464 comm="apparmor_parser" [ 7.283676] audit: type=1400 audit(1552733292.291:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=466 comm="apparmor_parser" [ 7.283684] audit: type=1400 audit(1552733292.291:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=466 comm="apparmor_parser" [ 7.302303] Bluetooth: Core ver 2.22 [ 7.302317] NET: Registered protocol family 31 [ 7.302318] Bluetooth: HCI device and connection manager initialized [ 7.302321] Bluetooth: HCI socket layer initialized [ 7.302323] Bluetooth: L2CAP socket layer initialized [ 7.302328] Bluetooth: SCO socket layer initialized [ 7.309607] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.315854] usbcore: registered new interface driver btusb [ 7.323077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.331022] Intel(R) Wireless WiFi driver for Linux [ 7.331023] Copyright(c) 2003- 2015 Intel Corporation [ 7.336404] lis3lv02d: 8 bits 3DC sensor found [ 7.339024] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 7.339495] iwlwifi 0000:04:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm [ 7.340148] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 7.367284] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144 [ 7.394910] iwlwifi 0000:04:00.0: base HW address: 80:86:f2:a5:57:d5 [ 7.403904] hp_wmi: query 0xd returned error 0x5 [ 7.403968] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 7.441145] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 7.441147] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 7.441148] RAPL PMU: hw unit of domain package 2^-14 Joules [ 7.441149] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 7.441150] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 7.455776] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.467467] AVX2 version of gcm_enc/dec engaged. [ 7.467469] AES CTR mode by8 optimization enabled [ 7.481650] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 7.481653] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.481656] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 7.481657] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 7.481659] snd_hda_codec_idt hdaudioC1D0: inputs: [ 7.481661] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 7.481663] snd_hda_codec_idt hdaudioC1D0: Mic=0xc [ 7.493165] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 7.493297] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 7.493422] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 7.493487] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 7.493577] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 7.498037] Bluetooth: hci0: Intel firmware patch completed and activated [ 7.532943] random: crng init done [ 7.532945] random: 7 urandom warning(s) missed due to ratelimiting [ 7.546272] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 7.547741] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 7.639161] kvm: disabled by bios [ 7.644370] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.711845] intel_rapl: Found RAPL domain package [ 7.711847] intel_rapl: Found RAPL domain core [ 7.711848] intel_rapl: Found RAPL domain uncore [ 7.711849] intel_rapl: Found RAPL domain dram [ 7.733904] kvm: disabled by bios [ 7.789496] kvm: disabled by bios [ 7.853772] kvm: disabled by bios [ 7.864391] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.864393] Bluetooth: BNEP filters: protocol multicast [ 7.864397] Bluetooth: BNEP socket layer initialized [ 7.939784] iwlwifi 0000:04:00.0 wlo1: renamed from wlan0 [ 8.057884] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 8.130113] r8169 0000:03:00.0 enp3s0: link down [ 8.130354] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 8.158475] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 8.402826] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 8.474522] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 8.820136] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input22 [ 11.861496] wlo1: authenticate with e4:95:6e:40:2a:b8 [ 11.866827] wlo1: send auth to e4:95:6e:40:2a:b8 (try 1/3) [ 11.871116] wlo1: authenticated [ 11.872072] wlo1: associate with e4:95:6e:40:2a:b8 (try 1/3) [ 11.876130] wlo1: RX AssocResp from e4:95:6e:40:2a:b8 (capab=0x31 status=0 aid=14) [ 11.876800] wlo1: associated [ 11.900922] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 16.790725] systemd-journald[332]: File /var/log/journal/1b045f61411a4a2ab4e6f2577d5f37f6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 17.993255] Bluetooth: RFCOMM TTY layer initialized [ 17.993261] Bluetooth: RFCOMM socket layer initialized [ 17.993266] Bluetooth: RFCOMM ver 1.11 [ 132.900567] input: E3:28:E9:27:F0:6F as /devices/virtual/input/input23 [ 5749.434696] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 5749.434701] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [12190.158902] wlo1: deauthenticating from e4:95:6e:40:2a:b8 by local choice (Reason: 3=DEAUTH_LEAVING) [12190.972821] PM: suspend entry (deep) [12190.972823] PM: Syncing filesystems ... done. [12190.995177] Freezing user space processes ... (elapsed 0.002 seconds) done. [12190.997206] OOM killer disabled. [12190.997207] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12190.998571] Suspending console(s) (use no_console_suspend to debug) [12191.020346] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12191.026271] sd 0:0:0:0: [sda] Stopping disk [12191.409001] ACPI: EC: interrupt blocked [12191.430278] ACPI: Preparing to enter system sleep state S3 [12191.433969] ACPI: EC: event blocked [12191.433970] ACPI: EC: EC stopped [12191.433971] PM: Saving platform NVS memory [12191.433998] Disabling non-boot CPUs ... [12191.448705] IRQ 50: no longer affine to CPU1 [12191.449716] smpboot: CPU 1 is now offline [12191.472839] IRQ 48: no longer affine to CPU2 [12191.473862] smpboot: CPU 2 is now offline [12191.496761] IRQ 40: no longer affine to CPU3 [12191.496800] IRQ 47: no longer affine to CPU3 [12191.497817] smpboot: CPU 3 is now offline [12191.501194] ACPI: Low-level resume complete [12191.501313] ACPI: EC: EC started [12191.501314] PM: Restoring platform NVS memory [12191.507881] Enabling non-boot CPUs ... [12191.507965] x86: Booting SMP configuration: [12191.507968] smpboot: Booting Node 0 Processor 1 APIC 0x1 [12191.509302] cache: parent cpu1 should not be sleeping [12191.509733] CPU1 is up [12191.509827] smpboot: Booting Node 0 Processor 2 APIC 0x2 [12191.515180] cache: parent cpu2 should not be sleeping [12191.515695] CPU2 is up [12191.515757] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12191.516878] cache: parent cpu3 should not be sleeping [12191.517363] CPU3 is up [12191.525341] ACPI: Waking up from system sleep state S3 [12191.666545] ACPI: EC: interrupt unblocked [12191.796852] ACPI: EC: event unblocked [12191.803736] sd 0:0:0:0: [sda] Starting disk [12191.873944] r8169 0000:03:00.0 enp3s0: link down [12192.035982] usb 2-4: reset full-speed USB device number 2 using xhci_hcd [12192.118842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12192.177320] ata1.00: NCQ Send/Recv Log not supported [12192.178268] ata1.00: NCQ Send/Recv Log not supported [12192.178561] ata1.00: configured for UDMA/133 [12193.244273] ACPI: button: The lid device is not compliant to SW_LID. [12193.306020] acpi LNXPOWER:02: Turning OFF [12193.306146] acpi LNXPOWER:01: Turning OFF [12193.306197] OOM killer enabled. [12193.306198] Restarting tasks ... [12193.306363] acpi PNP0501:00: Still not present [12193.315595] done. [12193.318740] Bluetooth: hci0: read Intel version: 370710018002030d00 [12193.318746] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [12193.442221] PM: suspend exit [12193.451595] usb 2-7: new high-speed USB device number 3 using xhci_hcd [12193.467415] Bluetooth: hci0: Intel firmware patch completed and activated [12193.508970] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [12193.581691] r8169 0000:03:00.0 enp3s0: link down [12193.581947] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [12193.584061] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [12193.683048] usb 2-7: New USB device found, idVendor=05c8, idProduct=0359 [12193.683051] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12193.683053] usb 2-7: Product: HP HD Webcam [12193.683055] usb 2-7: Manufacturer: SunplusIT INC. [12193.822673] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [12193.919541] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [12193.930960] media: Linux media interface: v0.10 [12193.947403] Linux video capture interface: v2.00 [12193.971879] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0359) [12193.980385] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized! [12193.980388] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized! [12193.980390] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized! [12193.980392] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! [12193.980496] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input30 [12193.980629] usbcore: registered new interface driver uvcvideo [12193.980630] USB Video Class driver (1.1.1) [12194.091103] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [12194.131469] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [12197.316430] wlo1: authenticate with e4:95:6e:40:2a:b8 [12197.319510] wlo1: send auth to e4:95:6e:40:2a:b8 (try 1/3) [12197.336732] wlo1: authenticated [12197.339619] wlo1: associate with e4:95:6e:40:2a:b8 (try 1/3) [12197.343977] wlo1: RX AssocResp from e4:95:6e:40:2a:b8 (capab=0x31 status=0 aid=15) [12197.350076] wlo1: associated [12197.360543] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [12224.222471] usb 2-7: USB disconnect, device number 3 [12224.643403] usb 2-7: new high-speed USB device number 4 using xhci_hcd [12230.063377] usb 2-7: device descriptor read/64, error -110 [12230.402779] usb 2-7: New USB device found, idVendor=05c8, idProduct=0359 [12230.402786] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12230.402790] usb 2-7: Product: HP HD Webcam [12230.402794] usb 2-7: Manufacturer: SunplusIT INC. [12230.475568] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0359) [12230.484254] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized! [12230.484262] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized! [12230.484268] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized! [12230.484273] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! [12230.484580] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input31 [12441.669649] kauditd_printk_skb: 11 callbacks suppressed [12441.669650] audit: type=1400 audit(1552856380.166:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=8801 comm="apparmor_parser" [12441.685859] audit: type=1400 audit(1552856380.182:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8801 comm="apparmor_parser" [12442.789702] audit: type=1400 audit(1552856381.286:25): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6531/usr/lib/snapd/snap-confine" pid=8892 comm="apparmor_parser" [12442.789706] audit: type=1400 audit(1552856381.286:26): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6531/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8892 comm="apparmor_parser" [12442.792656] audit: type=1400 audit(1552856381.286:27): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=8894 comm="apparmor_parser" [12442.793519] audit: type=1400 audit(1552856381.290:28): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=8895 comm="apparmor_parser" [12442.808867] audit: type=1400 audit(1552856381.302:29): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.android-studio" pid=8903 comm="apparmor_parser" [12442.808894] audit: type=1400 audit(1552856381.302:30): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.android-studio.android-studio" pid=8904 comm="apparmor_parser" [16302.008445] wlo1: deauthenticating from e4:95:6e:40:2a:b8 by local choice (Reason: 3=DEAUTH_LEAVING) [16302.684138] PM: suspend entry (deep) [16302.684140] PM: Syncing filesystems ... done. [16302.713685] Freezing user space processes ... (elapsed 0.002 seconds) done. [16302.716232] OOM killer disabled. [16302.716232] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [16302.717187] Suspending console(s) (use no_console_suspend to debug) [16302.745104] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16302.748555] sd 0:0:0:0: [sda] Stopping disk [16303.205551] ACPI: EC: interrupt blocked [16303.229369] ACPI: Preparing to enter system sleep state S3 [16303.234058] ACPI: EC: event blocked [16303.234059] ACPI: EC: EC stopped [16303.234060] PM: Saving platform NVS memory [16303.234083] Disabling non-boot CPUs ... [16303.249594] IRQ 50: no longer affine to CPU1 [16303.250611] smpboot: CPU 1 is now offline [16303.273610] IRQ 48: no longer affine to CPU2 [16303.274638] smpboot: CPU 2 is now offline [16303.298524] smpboot: CPU 3 is now offline [16303.301847] ACPI: Low-level resume complete [16303.301967] ACPI: EC: EC started [16303.301968] PM: Restoring platform NVS memory [16303.308560] Enabling non-boot CPUs ... [16303.308662] x86: Booting SMP configuration: [16303.308665] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16303.309989] cache: parent cpu1 should not be sleeping [16303.310431] CPU1 is up [16303.310510] smpboot: Booting Node 0 Processor 2 APIC 0x2 [16303.315855] cache: parent cpu2 should not be sleeping [16303.316357] CPU2 is up [16303.316461] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16303.317455] cache: parent cpu3 should not be sleeping [16303.317902] CPU3 is up [16303.325831] ACPI: Waking up from system sleep state S3 [16303.472198] ACPI: EC: interrupt unblocked [16303.605188] ACPI: EC: event unblocked [16303.609568] sd 0:0:0:0: [sda] Starting disk [16303.678823] r8169 0000:03:00.0 enp3s0: link down [16303.844687] usb 2-4: reset full-speed USB device number 2 using xhci_hcd [16303.923369] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [16303.983792] ata1.00: NCQ Send/Recv Log not supported [16303.984730] ata1.00: NCQ Send/Recv Log not supported [16303.985024] ata1.00: configured for UDMA/133 [16305.205802] acpi LNXPOWER:02: Turning OFF [16305.205940] acpi LNXPOWER:01: Turning OFF [16305.206001] OOM killer enabled. [16305.206003] Restarting tasks ... [16305.206232] acpi PNP0501:00: Still not present [16305.224328] usb 2-7: USB disconnect, device number 4 [16305.234144] done. [16305.346903] PM: suspend exit [16305.421689] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [16305.494335] r8169 0000:03:00.0 enp3s0: link down [16305.494414] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [16305.496902] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16305.749204] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16305.818470] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16305.833650] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [16305.871526] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [16306.013151] Bluetooth: hci0: read Intel version: 370710018002030d00 [16306.013318] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [16306.165150] Bluetooth: hci0: Intel firmware patch completed and activated [16309.217917] wlo1: authenticate with e4:95:6e:40:2a:b8 [16309.222567] wlo1: send auth to e4:95:6e:40:2a:b8 (try 1/3) [16309.226500] wlo1: authenticated [16309.228154] wlo1: associate with e4:95:6e:40:2a:b8 (try 1/3) [16309.232173] wlo1: RX AssocResp from e4:95:6e:40:2a:b8 (capab=0x31 status=0 aid=11) [16309.238013] wlo1: associated [16309.247946] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [16338.843670] input: E3:28:E9:27:F0:6F as /devices/virtual/input/input38 [16463.752766] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0). [16463.752771] atkbd serio0: Use 'setkeycodes e026 ' to make it known. [17187.763233] wlo1: deauthenticating from e4:95:6e:40:2a:b8 by local choice (Reason: 3=DEAUTH_LEAVING) [17188.466411] PM: suspend entry (deep) [17188.466413] PM: Syncing filesystems ... done. [17188.495064] Freezing user space processes ... (elapsed 0.001 seconds) done. [17188.497005] OOM killer disabled. [17188.497006] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [17188.498356] Suspending console(s) (use no_console_suspend to debug) [17188.516893] sd 0:0:0:0: [sda] Synchronizing SCSI cache [17188.520292] sd 0:0:0:0: [sda] Stopping disk [17189.125513] ACPI: EC: interrupt blocked [17189.149516] ACPI: Preparing to enter system sleep state S3 [17189.152228] ACPI: EC: event blocked [17189.152230] ACPI: EC: EC stopped [17189.152231] PM: Saving platform NVS memory [17189.152254] Disabling non-boot CPUs ... [17189.167258] smpboot: CPU 1 is now offline [17189.190442] smpboot: CPU 2 is now offline [17189.214356] smpboot: CPU 3 is now offline [17189.217627] ACPI: Low-level resume complete [17189.217751] ACPI: EC: EC started [17189.217752] PM: Restoring platform NVS memory [17189.224379] Enabling non-boot CPUs ... [17189.224478] x86: Booting SMP configuration: [17189.224481] smpboot: Booting Node 0 Processor 1 APIC 0x1 [17189.225798] cache: parent cpu1 should not be sleeping [17189.226232] CPU1 is up [17189.226347] smpboot: Booting Node 0 Processor 2 APIC 0x2 [17189.231699] cache: parent cpu2 should not be sleeping [17189.232204] CPU2 is up [17189.232258] smpboot: Booting Node 0 Processor 3 APIC 0x3 [17189.233278] cache: parent cpu3 should not be sleeping [17189.233723] CPU3 is up [17189.241632] ACPI: Waking up from system sleep state S3 [17189.389077] ACPI: EC: interrupt unblocked [17189.522850] ACPI: EC: event unblocked [17189.529350] sd 0:0:0:0: [sda] Starting disk [17189.594505] r8169 0000:03:00.0 enp3s0: link down [17189.760481] usb 2-4: reset full-speed USB device number 2 using xhci_hcd [17189.843294] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [17189.901425] ata1.00: NCQ Send/Recv Log not supported [17189.902360] ata1.00: NCQ Send/Recv Log not supported [17189.902653] ata1.00: configured for UDMA/133 [17191.010485] acpi LNXPOWER:02: Turning OFF [17191.010562] acpi LNXPOWER:01: Turning OFF [17191.010594] OOM killer enabled. [17191.010595] Restarting tasks ... [17191.010718] acpi PNP0501:00: Still not present [17191.024980] Bluetooth: hci0: read Intel version: 370710018002030d00 [17191.024985] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [17191.028007] done. [17191.123627] PM: suspend exit [17191.167989] Bluetooth: hci0: Intel firmware patch completed and activated [17191.186045] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [17191.258265] r8169 0000:03:00.0 enp3s0: link down [17191.258346] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [17191.259491] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [17191.508826] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [17191.598358] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [17192.466361] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [17192.506230] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [17194.991914] wlo1: authenticate with e4:95:6e:40:2a:b8 [17194.995558] wlo1: send auth to e4:95:6e:40:2a:b8 (try 1/3) [17194.999558] wlo1: authenticated [17194.999942] wlo1: associate with e4:95:6e:40:2a:b8 (try 1/3) [17195.003997] wlo1: RX AssocResp from e4:95:6e:40:2a:b8 (capab=0x31 status=0 aid=11) [17195.006870] wlo1: associated [17195.019635] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [17216.649390] input: E3:28:E9:27:F0:6F as /devices/virtual/input/input45 [17365.740132] usb 2-7: new high-speed USB device number 5 using xhci_hcd [17365.971385] usb 2-7: New USB device found, idVendor=05c8, idProduct=0359 [17365.971389] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [17365.971391] usb 2-7: Product: HP HD Webcam [17365.971394] usb 2-7: Manufacturer: SunplusIT INC. [17366.043835] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0359) [17366.052582] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized! [17366.052587] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized! [17366.052591] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized! [17366.052594] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! [17366.052770] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input46 [17369.568105] usb 2-7: reset high-speed USB device number 5 using xhci_hcd [17373.223973] usb 2-7: reset high-speed USB device number 5 using xhci_hcd [17722.628569] audit: type=1400 audit(1553041061.432:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=15617 comm="apparmor_parser" [17722.629009] audit: type=1400 audit(1553041061.432:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=15617 comm="apparmor_parser" [17722.652255] audit: type=1400 audit(1553041061.456:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=15617 comm="apparmor_parser" [18572.386310] wlo1: deauthenticating from e4:95:6e:40:2a:b8 by local choice (Reason: 3=DEAUTH_LEAVING) [18572.971620] PM: suspend entry (deep) [18572.971622] PM: Syncing filesystems ... done. [18572.993140] Freezing user space processes ... (elapsed 0.001 seconds) done. [18572.995106] OOM killer disabled. [18572.995106] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [18572.996427] Suspending console(s) (use no_console_suspend to debug) [18573.012515] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18573.015207] sd 0:0:0:0: [sda] Stopping disk [18573.492980] ACPI: EC: interrupt blocked [18573.515624] ACPI: Preparing to enter system sleep state S3 [18573.519361] ACPI: EC: event blocked [18573.519362] ACPI: EC: EC stopped [18573.519363] PM: Saving platform NVS memory [18573.519383] Disabling non-boot CPUs ... [18573.532952] IRQ 50: no longer affine to CPU1 [18573.533966] smpboot: CPU 1 is now offline [18573.557019] IRQ 48: no longer affine to CPU2 [18573.558060] smpboot: CPU 2 is now offline [18573.581965] smpboot: CPU 3 is now offline [18573.585274] ACPI: Low-level resume complete [18573.585398] ACPI: EC: EC started [18573.585400] PM: Restoring platform NVS memory [18573.592010] Enabling non-boot CPUs ... [18573.592109] x86: Booting SMP configuration: [18573.592112] smpboot: Booting Node 0 Processor 1 APIC 0x1 [18573.593434] cache: parent cpu1 should not be sleeping [18573.593876] CPU1 is up [18573.593957] smpboot: Booting Node 0 Processor 2 APIC 0x2 [18573.599290] cache: parent cpu2 should not be sleeping [18573.599759] CPU2 is up [18573.599811] smpboot: Booting Node 0 Processor 3 APIC 0x3 [18573.600809] cache: parent cpu3 should not be sleeping [18573.601247] CPU3 is up [18573.609171] ACPI: Waking up from system sleep state S3 [18573.754248] ACPI: EC: interrupt unblocked [18573.884953] ACPI: EC: event unblocked [18573.888821] sd 0:0:0:0: [sda] Starting disk [18573.958157] r8169 0000:03:00.0 enp3s0: link down [18574.124074] usb 2-7: reset high-speed USB device number 5 using xhci_hcd [18574.203072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [18574.263826] ata1.00: NCQ Send/Recv Log not supported [18574.264816] ata1.00: NCQ Send/Recv Log not supported [18574.265141] ata1.00: configured for UDMA/133 [18574.400110] usb 2-4: reset full-speed USB device number 2 using xhci_hcd [18575.430033] acpi LNXPOWER:02: Turning OFF [18575.430118] acpi LNXPOWER:01: Turning OFF [18575.430153] OOM killer enabled. [18575.430154] Restarting tasks ... [18575.430273] acpi PNP0501:00: Still not present [18575.442392] Bluetooth: hci0: read Intel version: 370710018002030d00 [18575.442538] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [18575.445701] done. [18575.552458] PM: suspend exit [18575.572396] Bluetooth: hci0: Intel firmware patch completed and activated [18575.617269] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [18575.689831] r8169 0000:03:00.0 enp3s0: link down [18575.689946] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [18575.690926] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [18575.949396] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [18576.032274] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [18576.197068] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [18576.237299] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [18579.430047] wlo1: authenticate with e4:95:6e:40:2a:b8 [18579.433777] wlo1: send auth to e4:95:6e:40:2a:b8 (try 1/3) [18579.438358] wlo1: authenticated [18579.439603] wlo1: associate with e4:95:6e:40:2a:b8 (try 1/3) [18579.443755] wlo1: RX AssocResp from e4:95:6e:40:2a:b8 (capab=0x31 status=0 aid=11) [18579.449567] wlo1: associated [18579.459298] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [18620.732590] input: E3:28:E9:27:F0:6F as /devices/virtual/input/input53 [18748.271730] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [19576.201116] usb 2-7: USB disconnect, device number 5 [19576.509659] usb 2-7: new high-speed USB device number 6 using xhci_hcd [19576.740959] usb 2-7: New USB device found, idVendor=05c8, idProduct=0359 [19576.740963] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19576.740965] usb 2-7: Product: HP HD Webcam [19576.740967] usb 2-7: Manufacturer: SunplusIT INC. [19576.813284] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0359) [19576.821937] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized! [19576.821942] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized! [19576.821945] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized! [19576.821948] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! [19576.822097] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input54 [19585.994151] usb 2-7: USB disconnect, device number 6 [20401.411689] usb 2-6: new full-speed USB device number 8 using xhci_hcd [20401.561583] usb 2-6: New USB device found, idVendor=1536, idProduct=0101 [20401.561589] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20401.561593] usb 2-6: Product: AirBar 13.3 [20401.561596] usb 2-6: Manufacturer: Neonode [20401.561599] usb 2-6: SerialNumber: 1.7.2 [20401.583053] hidraw: raw HID events driver (C) Jiri Kosina [20401.586673] usbcore: registered new interface driver usbhid [20401.586674] usbhid: USB HID core driver [20401.592471] input: Neonode AirBar 13.3 as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/0003:1536:0101.0001/input/input55 [20401.652035] hid-multitouch 0003:1536:0101.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Neonode AirBar 13.3] on usb-0000:00:14.0-6/input0