2019-03-16 00:12:15 |
Fabian |
bug |
|
|
added bug |
2019-03-16 00:12:15 |
Fabian |
attachment added |
|
lspci -vv, lshw and full dmesg https://bugs.launchpad.net/bugs/1820363/+attachment/5246647/+files/lspci-lshw-dmesg%404.15.0-29-generic.txt |
|
2019-03-16 00:16:44 |
Fabian |
description |
Hello,
Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso)
Startup is hanging with :
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
I'm facing exactly the same bug as these one:
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html
https://bugs.gentoo.org/show_bug.cgi?id=612704
I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above.
I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output:
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 8.041967] xhci_hcd 0000:0d:00.0: Resetting
[ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting
[ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting
[ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting
[ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting
[ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting
[ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting
[ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up
[ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
It was lucky because it never worked again.
PCI card was not working but computer started.
Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card.
I tried the same PCI Card with two computer and always had the same result.
Kernel is hanging with xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 and nothing more.
I tried this PCI Card with a CentOS 7.3 and kernel (3.10) is starting well and PCI card is fully working.
Thanks for your assistance.
Kind Regards |
Hello,
Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso)
Startup is hanging with :
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
I'm facing exactly the same bug as these one:
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html
https://bugs.gentoo.org/show_bug.cgi?id=612704
I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above.
I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output:
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 8.041967] xhci_hcd 0000:0d:00.0: Resetting
[ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting
[ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting
[ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting
[ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting
[ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting
[ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting
[ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up
[ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
It was lucky because it never worked again.
PCI card was not working but computer started.
Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card.
I tried the same PCI Card with two computers and always had the same results.
Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more.
I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working.
Many thanks for your assistance.
Kind Regards |
|
2019-03-16 00:21:16 |
Fabian |
description |
Hello,
Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso)
Startup is hanging with :
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
I'm facing exactly the same bug as these one:
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html
https://bugs.gentoo.org/show_bug.cgi?id=612704
I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above.
I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output:
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 8.041967] xhci_hcd 0000:0d:00.0: Resetting
[ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting
[ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting
[ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting
[ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting
[ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting
[ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting
[ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up
[ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
It was lucky because it never worked again.
PCI card was not working but computer started.
Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card.
I tried the same PCI Card with two computers and always had the same results.
Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more.
I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working.
Many thanks for your assistance.
Kind Regards |
Hello,
Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso)
Startup is hanging with :
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
I'm facing exactly the same bug as these one:
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html
https://bugs.gentoo.org/show_bug.cgi?id=612704
I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above.
I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output:
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 8.041967] xhci_hcd 0000:0d:00.0: Resetting
[ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting
[ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting
[ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting
[ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting
[ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting
[ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting
[ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up
[ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
It was lucky because it never worked again.
PCI card was not working but computer started.
Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card.
I tried the same PCI Card with two computers and always had the same results.
Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more.
I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working.
Many thanks for your assistance.
I apologize if it's an already reported bug.
Kind Regards |
|
2019-03-16 00:23:01 |
Fabian |
description |
Hello,
Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso)
Startup is hanging with :
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
I'm facing exactly the same bug as these one:
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html
https://bugs.gentoo.org/show_bug.cgi?id=612704
I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above.
I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output:
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 8.041967] xhci_hcd 0000:0d:00.0: Resetting
[ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting
[ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting
[ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting
[ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting
[ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting
[ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting
[ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up
[ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
It was lucky because it never worked again.
PCI card was not working but computer started.
Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card.
I tried the same PCI Card with two computers and always had the same results.
Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more.
I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working.
Many thanks for your assistance.
I apologize if it's an already reported bug.
Kind Regards |
Hello,
Using Ubuntu installation media (ubuntu-18.04.2-server-amd64.iso / ubuntu-18.04.[1-2]-live-server-amd64.iso / Ubuntu Live 18.04.2 iso / Ubuntu Mate Live Ubuntu Live 18.04.[1-2] iso)
Startup is hanging with :
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
I'm facing exactly the same bug as these one:
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html
https://bugs.gentoo.org/show_bug.cgi?id=612704
I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above.
I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output:
[ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330
[ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit]
[ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 8.041967] xhci_hcd 0000:0d:00.0: Resetting
[ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway
[ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting
[ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting
[ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting
[ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting
[ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting
[ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting
[ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up
[ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3
[ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
[ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19
[ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19
[ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered
[ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19
It was lucky because it never worked again.
PCI card was not working but computer started.
Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card.
I tried the same PCI Card with two computers and always had the same results.
Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more.
I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working.
Many thanks for your assistance.
I apologize if it's an already reported bug.
Kind Regards |
|
2019-03-16 00:30:06 |
Ubuntu Kernel Bot |
linux (Ubuntu): status |
New |
Incomplete |
|
2019-03-16 00:30:09 |
Ubuntu Kernel Bot |
tags |
|
bionic |
|
2019-03-21 12:32:56 |
Terry Rudd |
bug |
|
|
added subscriber Terry Rudd |
2019-03-31 13:37:44 |
Fabian |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|