[ 0.000000] Linux version 4.18.0-16-generic (buildd@lcy01-amd64-006) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #17~18.04.1-Ubuntu SMP Tue Feb 12 13:35:51 UTC 2019 (Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=8ffc268d-6911-42c4-9bc3-a290376cb41b ro quiet splash nvidia-drm.modeset=1 nopti spectre_v2=off spectre_v2_user=off nospec noibrs noibpb l1tf=off vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a33fcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a33fd000-0x00000000a33fdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a33fe000-0x00000000a3447fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a3448000-0x00000000ad61bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad61c000-0x00000000ad66bfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ad66c000-0x00000000afeadfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000afeae000-0x00000000affadfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000affae000-0x00000000afffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000afffe000-0x00000000afffefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000affff000-0x00000000b7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008417fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by Lenovo [ 0.000000] efi: SMBIOS=0xaef68000 ACPI=0xafffd000 ACPI 2.0=0xafffd014 ESRT=0xaeddd000 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 20FXS05500/20FXS05500, BIOS R07ET88W (2.28 ) 01/18/2019 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x841800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00BC000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 00BA000000 mask 7FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0xaffff max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000aeddd000 to 0x00000000aeddd088. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.000000] Kernel/User page tables isolation: disabled on command line. [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x584563000, 0x584563fff] PGTABLE [ 0.000000] BRK [0x584564000, 0x584564fff] PGTABLE [ 0.000000] BRK [0x584565000, 0x584565fff] PGTABLE [ 0.000000] BRK [0x584566000, 0x584566fff] PGTABLE [ 0.000000] BRK [0x584567000, 0x584567fff] PGTABLE [ 0.000000] BRK [0x584568000, 0x584568fff] PGTABLE [ 0.000000] BRK [0x584569000, 0x584569fff] PGTABLE [ 0.000000] BRK [0x58456a000, 0x58456afff] PGTABLE [ 0.000000] BRK [0x58456b000, 0x58456bfff] PGTABLE [ 0.000000] BRK [0x58456c000, 0x58456cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x2f4db000-0x33a64fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AFFFD014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000AFFD1188 0000FC (v01 LENOVO TP-R07 00000000 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000AFFF1000 0000F4 (v05 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000AFFDC000 010D9A (v02 LENOVO TP-R07 00002280 INTL 20141107) [ 0.000000] ACPI: FACS 0x00000000AFF67000 000040 [ 0.000000] ACPI: TCPA 0x00000000AFFFB000 000032 (v02 LENOVO TP-R07 00000002 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000AFFFA000 0004B7 (v02 LENOVO Tpm2Tabl 00001000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000AFFF9000 00004B (v02 LENOVO MeSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: TPM2 0x00000000AFFF8000 000034 (v03 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000AFF7E000 000042 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000AFFF3000 004D97 (v02 LENOVO SaSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000AFFF2000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107) [ 0.000000] ACPI: ECDT 0x00000000AFFF0000 000052 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000AFFEF000 000038 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000AFFEE000 0000BC (v03 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000AFFED000 00003C (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000AFFDA000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107) [ 0.000000] ACPI: DBGP 0x00000000AFFD9000 000034 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: DBG2 0x00000000AFFD8000 000054 (v00 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: BOOT 0x00000000AFFD7000 000028 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000AFFD6000 00004A (v02 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000AFFD5000 000649 (v02 LENOVO Cpu0Ist 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000AFFD4000 000E73 (v02 LENOVO CpuSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000AFFD3000 0003D9 (v02 LENOVO CtdpB 00001000 INTL 20141107) [ 0.000000] ACPI: POAT 0x00000000AFFD2000 000055 (v03 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000AFFCF000 001005 (v01 LENOVO NvOptTbl 00001000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000AFFFC000 000732 (v02 LENOVO SgPch 00001000 INTL 20141107) [ 0.000000] ACPI: DMAR 0x00000000AFFCE000 0000A8 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: ASF! 0x00000000AFFCD000 0000A5 (v32 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000AFFCC000 000044 (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000AFF44000 00013E (v01 LENOVO TP-R07 00002280 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000008417fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x8417d5000-0x8417fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000008417fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a33fcfff] [ 0.000000] node 0: [mem 0x00000000a3448000-0x00000000ad61bfff] [ 0.000000] node 0: [mem 0x00000000afffe000-0x00000000afffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000008417fffff] [ 0.000000] Reserved but unavailable: 10899 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000008417fffff] [ 0.000000] On node 0 totalpages: 8318317 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11032 pages used for memmap [ 0.000000] DMA32 zone: 706002 pages, LIFO batch:31 [ 0.000000] Normal zone: 118880 pages used for memmap [ 0.000000] Normal zone: 7608320 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xba800000-0xbc7fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa33fd000-0xa33fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xa33fe000-0xa3447fff] [ 0.000000] PM: Registered nosave memory: [mem 0xad61c000-0xad66bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xad66c000-0xafeadfff] [ 0.000000] PM: Registered nosave memory: [mem 0xafeae000-0xaffadfff] [ 0.000000] PM: Registered nosave memory: [mem 0xaffae000-0xafffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xaffff000-0xb7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xb85fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc800000-0xf80f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.000000] [mem 0xbc800000-0xf80f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8188319 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=UUID=8ffc268d-6911-42c4-9bc3-a290376cb41b ro quiet splash nvidia-drm.modeset=1 nopti spectre_v2=off spectre_v2_user=off nospec noibrs noibpb l1tf=off vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32489344K/33273268K available (12300K kernel code, 2633K rwdata, 4360K rodata, 2464K init, 2340K bss, 783924K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 40832 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 39 [ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.004000] DMAR: RMRR base: 0x000000af42f000 end: 0x000000af44efff [ 0.004000] DMAR: RMRR base: 0x000000ba000000 end: 0x000000bc7fffff [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.004000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.004000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 2600.000 MHz processor [ 0.028000] tsc: Detected 2592.000 MHz TSC [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.033521] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.033579] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.033640] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.033817] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.033817] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.033821] mce: CPU supports 10 MCE banks [ 0.033828] CPU0: Thermal monitoring enabled (TM1) [ 0.033842] process: using mwait in idle threads [ 0.033844] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.033844] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.033846] Spectre V2 : off selected on command line. [ 0.033847] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.040255] Freeing SMP alternatives memory: 36K [ 0.044056] TSC deadline timer enabled [ 0.044061] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.044126] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.044150] ... version: 4 [ 0.044151] ... bit width: 48 [ 0.044151] ... generic registers: 4 [ 0.044151] ... value mask: 0000ffffffffffff [ 0.044152] ... max period: 00007fffffffffff [ 0.044152] ... fixed-purpose events: 3 [ 0.044153] ... event mask: 000000070000000f [ 0.044180] Hierarchical SRCU implementation. [ 0.045049] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.045057] smp: Bringing up secondary CPUs ... [ 0.045117] x86: Booting SMP configuration: [ 0.045118] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.048732] smp: Brought up 1 node, 8 CPUs [ 0.048732] smpboot: Max logical packages: 1 [ 0.048732] smpboot: Total of 8 processors activated (41472.00 BogoMIPS) [ 0.052587] devtmpfs: initialized [ 0.052587] x86/mm: Memory block size: 128MB [ 0.053933] PM: Registering ACPI NVS region [mem 0xa33fd000-0xa33fdfff] (4096 bytes) [ 0.053933] PM: Registering ACPI NVS region [mem 0xafeae000-0xaffadfff] (1048576 bytes) [ 0.053933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.053933] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.053933] pinctrl core: initialized pinctrl subsystem [ 0.053933] RTC time: 7:57:56, date: 03/31/19 [ 0.053933] NET: Registered protocol family 16 [ 0.053933] audit: initializing netlink subsys (disabled) [ 0.056008] audit: type=2000 audit(1554019076.056:1): state=initialized audit_enabled=0 res=1 [ 0.056083] cpuidle: using governor ladder [ 0.056083] cpuidle: using governor menu [ 0.056083] Simple Boot Flag at 0x47 set to 0x1 [ 0.056083] KVM setup pv remote TLB flush [ 0.056083] ACPI: bus type PCI registered [ 0.056083] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.060023] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.060029] PCI: not using MMCONFIG [ 0.060029] PCI: Using configuration type 1 for base access [ 0.061140] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.061140] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.061140] ACPI: Added _OSI(Module Device) [ 0.061140] ACPI: Added _OSI(Processor Device) [ 0.061140] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.061140] ACPI: Added _OSI(Processor Aggregator Device) [ 0.061140] ACPI: Added _OSI(Linux-Dell-Video) [ 0.061140] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.061140] ACPI: EC: EC started [ 0.061140] ACPI: EC: interrupt blocked [ 0.061140] ACPI: \: Used as first EC [ 0.061140] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.061140] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.089151] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.091139] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.096219] ACPI: Dynamic OEM Table Load: [ 0.096245] ACPI: SSDT 0xFFFF9B4F5D09B000 000649 (v02 PmRef Cpu0Ist 00003000 INTL 20141107) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0._PPC], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI Error: Skip parsing opcode Method (20180531/psloop-543) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0._PCT], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI Error: Skip parsing opcode Method (20180531/psloop-543) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0._PSS], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI Error: Skip parsing opcode Method (20180531/psloop-543) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0.LPSS], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0.TPSS], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0.PSDF], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0._PSD], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI Error: Skip parsing opcode Method (20180531/psloop-543) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0.HPSD], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096245] ACPI BIOS Error (bug): Failure creating [\_PR.CPU0.SPSD], AE_ALREADY_EXISTS (20180531/dswload2-316) [ 0.096245] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221) [ 0.096432] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.096840] ACPI: Dynamic OEM Table Load: [ 0.096846] ACPI: SSDT 0xFFFF9B4F5CCC5800 0003CF (v02 PmRef Cpu0Cst 00003001 INTL 20141107) [ 0.097166] ACPI: Dynamic OEM Table Load: [ 0.097172] ACPI: SSDT 0xFFFF9B4F5CD4B540 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20141107) [ 0.097400] ACPI: Dynamic OEM Table Load: [ 0.097404] ACPI: SSDT 0xFFFF9B4F5CC9CE00 000130 (v02 PmRef HwpLvt 00003000 INTL 20141107) [ 0.100600] ACPI: Dynamic OEM Table Load: [ 0.100607] ACPI: SSDT 0xFFFF9B4F5D10B000 0005AA (v02 PmRef ApIst 00003000 INTL 20141107) [ 0.101067] ACPI: Dynamic OEM Table Load: [ 0.101067] ACPI: SSDT 0xFFFF9B4F5CC9E200 000119 (v02 PmRef ApHwp 00003000 INTL 20141107) [ 0.101068] ACPI: Dynamic OEM Table Load: [ 0.101068] ACPI: SSDT 0xFFFF9B4F5CD6CE00 000119 (v02 PmRef ApCst 00003000 INTL 20141107) [ 0.105291] ACPI: Interpreter enabled [ 0.105337] ACPI: (supports S0 S3 S4 S5) [ 0.105337] ACPI: Using IOAPIC for interrupt routing [ 0.105359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.105662] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.105669] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.105911] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.108768] ACPI: Power Resource [PUBS] (on) [ 0.109002] ACPI: Power Resource [PG00] (on) [ 0.109113] ACPI: Power Resource [PG01] (on) [ 0.109220] ACPI: Power Resource [PG02] (on) [ 0.114330] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.114439] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11) [ 0.114547] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.114654] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.114761] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.114867] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.114966] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.115076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.115165] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-80]) [ 0.115168] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.115268] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.115313] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.115314] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.115315] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.115316] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.115339] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.115339] PCI host bridge to bus 0000:00 [ 0.115339] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.115339] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.115339] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window] [ 0.115339] pci_bus 0000:00: root bus resource [bus 00-80] [ 0.115339] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000 [ 0.115339] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.115339] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.115339] pci 0000:00:01.2: [8086:1909] type 01 class 0x060400 [ 0.115339] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.115339] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000 [ 0.115339] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf2ffffff 64bit] [ 0.115339] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.115339] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f] [ 0.115339] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.115339] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.115339] pci 0000:00:14.0: reg 0x10: [mem 0xf4220000-0xf422ffff 64bit] [ 0.115339] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.115339] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.115339] pci 0000:00:14.2: reg 0x10: [mem 0xf424a000-0xf424afff 64bit] [ 0.115339] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.115339] pci 0000:00:16.0: reg 0x10: [mem 0xf424b000-0xf424bfff 64bit] [ 0.115339] pci 0000:00:16.0: PME# supported from D3hot [ 0.115339] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601 [ 0.115352] pci 0000:00:17.0: reg 0x10: [mem 0xf4248000-0xf4249fff] [ 0.115357] pci 0000:00:17.0: reg 0x14: [mem 0xf424e000-0xf424e0ff] [ 0.115363] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087] [ 0.115369] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b] [ 0.115374] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f] [ 0.115380] pci 0000:00:17.0: reg 0x24: [mem 0xf424c000-0xf424c7ff] [ 0.115417] pci 0000:00:17.0: PME# supported from D3hot [ 0.115769] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.115843] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.116210] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400 [ 0.116277] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.116647] pci 0000:00:1f.0: [8086:a14d] type 00 class 0x060100 [ 0.117074] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.117086] pci 0000:00:1f.2: reg 0x10: [mem 0xf4244000-0xf4247fff] [ 0.117449] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.117474] pci 0000:00:1f.3: reg 0x10: [mem 0xf4240000-0xf4243fff 64bit] [ 0.117502] pci 0000:00:1f.3: reg 0x20: [mem 0xf4230000-0xf423ffff 64bit] [ 0.117546] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.117888] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.117941] pci 0000:00:1f.4: reg 0x10: [mem 0xf424d000-0xf424d0ff 64bit] [ 0.117990] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.118385] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 [ 0.118410] pci 0000:00:1f.6: reg 0x10: [mem 0xf4200000-0xf421ffff] [ 0.118516] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.118879] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.118926] pci 0000:02:00.0: [10de:134d] type 00 class 0x030200 [ 0.118948] pci 0000:02:00.0: reg 0x10: [mem 0xf3000000-0xf3ffffff] [ 0.118961] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.118974] pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.118982] pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f] [ 0.118989] pci 0000:02:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.119151] pci 0000:00:01.2: PCI bridge to [bus 02] [ 0.119152] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.119154] pci 0000:00:01.2: bridge window [mem 0xf3000000-0xf3ffffff] [ 0.119156] pci 0000:00:01.2: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.119505] pci 0000:03:00.0: [8086:24f3] type 00 class 0x028000 [ 0.119550] pci 0000:03:00.0: reg 0x10: [mem 0xf4100000-0xf4101fff 64bit] [ 0.119749] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.124293] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.124297] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff] [ 0.124426] pci 0000:04:00.0: [10ec:522a] type 00 class 0xff0000 [ 0.124453] pci 0000:04:00.0: reg 0x10: [mem 0xf4000000-0xf4000fff] [ 0.124628] pci 0000:04:00.0: supports D1 D2 [ 0.124629] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.124894] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.124897] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf40fffff] [ 0.126203] ACPI: EC: interrupt unblocked [ 0.126244] ACPI: EC: event unblocked [ 0.126259] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.126260] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.126463] SCSI subsystem initialized [ 0.126472] libata version 3.00 loaded. [ 0.126472] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.126472] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.126472] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.126472] vgaarb: loaded [ 0.126472] ACPI: bus type USB registered [ 0.126472] usbcore: registered new interface driver usbfs [ 0.126472] usbcore: registered new interface driver hub [ 0.126472] usbcore: registered new device driver usb [ 0.126472] pps_core: LinuxPPS API ver. 1 registered [ 0.126472] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.126472] PTP clock support registered [ 0.126472] EDAC MC: Ver: 3.0.0 [ 0.126472] Registered efivars operations [ 0.156025] PCI: Using ACPI for IRQ routing [ 0.161962] PCI: pci_cache_line_size set to 64 bytes [ 0.162058] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.162059] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.162059] e820: reserve RAM buffer [mem 0xa33fd000-0xa3ffffff] [ 0.162060] e820: reserve RAM buffer [mem 0xad61c000-0xafffffff] [ 0.162061] e820: reserve RAM buffer [mem 0xaffff000-0xafffffff] [ 0.162061] e820: reserve RAM buffer [mem 0x841800000-0x843ffffff] [ 0.162137] NetLabel: Initializing [ 0.162138] NetLabel: domain hash size = 128 [ 0.162138] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.162147] NetLabel: unlabeled traffic allowed by default [ 0.164358] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.164361] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.168015] clocksource: Switched to clocksource tsc-early [ 0.177480] VFS: Disk quotas dquot_6.6.0 [ 0.177491] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.177583] AppArmor: AppArmor Filesystem Enabled [ 0.177600] pnp: PnP ACPI init [ 0.178031] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.178033] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.178033] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved [ 0.178034] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.178035] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.178039] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.178093] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.178094] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.178094] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.178095] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.178096] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.178097] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.178098] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.178099] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.178100] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.178100] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.178101] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.178102] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.178103] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.178104] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.178105] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.178106] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.178107] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.178109] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178166] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.178180] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.178200] pnp 00:04: Plug and Play ACPI device, IDs LEN2018 PNP0f13 (active) [ 0.178837] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.178838] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.178839] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.178840] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.178841] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.178842] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.178843] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.178845] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179120] system 00:06: [io 0xff00-0xfffe] has been reserved [ 0.179122] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179198] pnp: PnP ACPI: found 7 devices [ 0.184541] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.184543] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.184573] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.184579] pci 0000:02:00.0: BAR 6: no space for [mem size 0x00080000 pref] [ 0.184580] pci 0000:02:00.0: BAR 6: failed to assign [mem size 0x00080000 pref] [ 0.184581] pci 0000:00:01.2: PCI bridge to [bus 02] [ 0.184582] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.184584] pci 0000:00:01.2: bridge window [mem 0xf3000000-0xf3ffffff] [ 0.184586] pci 0000:00:01.2: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.184588] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.184603] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff] [ 0.184607] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.184610] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf40fffff] [ 0.184616] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.184617] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.184618] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.184618] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.184619] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.184620] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.184621] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.184621] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.184622] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.184623] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.184624] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.184624] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.184625] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.184626] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.184626] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.184627] pci_bus 0000:00: resource 19 [mem 0xbc800000-0xfebfffff window] [ 0.184628] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.184628] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff] [ 0.184629] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.184630] pci_bus 0000:03: resource 1 [mem 0xf4100000-0xf41fffff] [ 0.184631] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf40fffff] [ 0.184721] NET: Registered protocol family 2 [ 0.184846] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.184916] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.185151] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.185247] TCP: Hash tables configured (established 262144 bind 65536) [ 0.185281] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.185339] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.185458] NET: Registered protocol family 1 [ 0.185461] NET: Registered protocol family 44 [ 0.185469] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.185736] PCI: CLS 0 bytes, default 64 [ 0.185758] Unpacking initramfs... [ 0.954393] Freeing initrd memory: 71208K [ 0.988031] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.988036] software IO TLB [mem 0xa8cda000-0xaccda000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 0.988217] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] [ 0.988220] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs [ 0.988290] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns [ 0.988301] clocksource: Switched to clocksource tsc [ 0.988387] Scanning for low memory corruption every 60 seconds [ 0.988968] Initialise system trusted keyrings [ 0.988977] Key type blacklist registered [ 0.989001] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.990030] zbud: loaded [ 0.990331] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.990466] fuse init (API version 7.27) [ 0.990507] pstore: using deflate compression [ 0.991297] Key type asymmetric registered [ 0.991298] Asymmetric key parser 'x509' registered [ 0.991327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.991352] io scheduler noop registered [ 0.991353] io scheduler deadline registered [ 0.991374] io scheduler cfq registered (default) [ 0.991928] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.991970] efifb: probing for efifb [ 0.991979] efifb: framebuffer at 0xc0000000, using 14400k, total 14400k [ 0.991980] efifb: mode is 2560x1440x32, linelength=10240, pages=1 [ 0.991980] efifb: scrolling: redraw [ 0.991981] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.992088] Console: switching to colour frame buffer device 320x90 [ 0.992119] fb0: EFI VGA frame buffer device [ 0.992125] intel_idle: MWAIT substates: 0x11142120 [ 0.992126] intel_idle: v0.4.1 model 0x5E [ 0.992451] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.992748] ACPI: AC Adapter [AC] (on-line) [ 0.992798] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.992807] ACPI: Lid Switch [LID] [ 0.992829] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.992834] ACPI: Sleep Button [SLPB] [ 0.992867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.992871] ACPI: Power Button [PWRF] [ 0.992922] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.992929] No Local Variables are initialized for Method [_CPC] [ 0.992930] No Arguments are initialized for method [_CPC] [ 0.992932] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993006] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993011] No Local Variables are initialized for Method [_CPC] [ 0.993012] No Arguments are initialized for method [_CPC] [ 0.993013] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993018] ACPI Error: Method parse/execution failed \_PR.CPU1._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993084] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993089] No Local Variables are initialized for Method [_CPC] [ 0.993090] No Arguments are initialized for method [_CPC] [ 0.993091] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993095] ACPI Error: Method parse/execution failed \_PR.CPU2._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993161] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993165] No Local Variables are initialized for Method [_CPC] [ 0.993166] No Arguments are initialized for method [_CPC] [ 0.993167] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993171] ACPI Error: Method parse/execution failed \_PR.CPU3._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993232] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993236] No Local Variables are initialized for Method [_CPC] [ 0.993237] No Arguments are initialized for method [_CPC] [ 0.993238] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993242] ACPI Error: Method parse/execution failed \_PR.CPU4._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993306] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993310] No Local Variables are initialized for Method [_CPC] [ 0.993311] No Arguments are initialized for method [_CPC] [ 0.993312] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993316] ACPI Error: Method parse/execution failed \_PR.CPU5._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993378] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993382] No Local Variables are initialized for Method [_CPC] [ 0.993383] No Arguments are initialized for method [_CPC] [ 0.993384] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993388] ACPI Error: Method parse/execution failed \_PR.CPU6._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993451] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._CPC.CPC1], AE_NOT_FOUND (20180531/psargs-330) [ 0.993455] No Local Variables are initialized for Method [_CPC] [ 0.993456] No Arguments are initialized for method [_CPC] [ 0.993457] ACPI Error: Method parse/execution failed \_PR.CPU0._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.993461] ACPI Error: Method parse/execution failed \_PR.CPU7._CPC, AE_NOT_FOUND (20180531/psparse-516) [ 0.995406] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.995407] ACPI: Thermal Zone [THM0] (36 C) [ 0.995523] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.013163] ACPI: Battery Slot [BAT0] (battery present) [ 1.016968] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.018970] Linux agpgart interface v0.103 [ 1.080818] loop: module loaded [ 1.080969] libphy: Fixed MDIO Bus: probed [ 1.080969] tun: Universal TUN/TAP device driver, 1.6 [ 1.081023] PPP generic driver version 2.4.2 [ 1.081093] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.081095] ehci-pci: EHCI PCI platform driver [ 1.081104] ehci-platform: EHCI generic platform driver [ 1.081111] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.081113] ohci-pci: OHCI PCI platform driver [ 1.081119] ohci-platform: OHCI generic platform driver [ 1.081126] uhci_hcd: USB Universal Host Controller Interface driver [ 1.081299] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.081304] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.082382] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 1.082386] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.082553] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.082554] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.082555] usb usb1: Product: xHCI Host Controller [ 1.082556] usb usb1: Manufacturer: Linux 4.18.0-16-generic xhci-hcd [ 1.082556] usb usb1: SerialNumber: 0000:00:14.0 [ 1.082667] hub 1-0:1.0: USB hub found [ 1.082692] hub 1-0:1.0: 16 ports detected [ 1.084191] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.084194] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.084197] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.084222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.084223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.084223] usb usb2: Product: xHCI Host Controller [ 1.084224] usb usb2: Manufacturer: Linux 4.18.0-16-generic xhci-hcd [ 1.084225] usb usb2: SerialNumber: 0000:00:14.0 [ 1.084324] hub 2-0:1.0: USB hub found [ 1.084343] hub 2-0:1.0: 8 ports detected [ 1.085310] usb: port power management may be unreliable [ 1.085553] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.087574] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.087577] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.087905] mousedev: PS/2 mouse device common for all mice [ 1.088061] rtc_cmos 00:02: RTC can wake from S4 [ 1.088549] rtc_cmos 00:02: registered as rtc0 [ 1.088561] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.088566] i2c /dev entries driver [ 1.088569] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.088622] device-mapper: uevent: version 1.0.3 [ 1.088678] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.088681] intel_pstate: Intel P-state driver initializing [ 1.089416] intel_pstate: HWP enabled [ 1.089702] ledtrig-cpu: registered to indicate activity on CPUs [ 1.089703] EFI Variables Facility v0.08 2004-May-17 [ 1.090070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.135615] intel_pmc_core: initialized [ 1.135790] NET: Registered protocol family 10 [ 1.138952] Segment Routing with IPv6 [ 1.138966] NET: Registered protocol family 17 [ 1.138989] Key type dns_resolver registered [ 1.139411] RAS: Correctable Errors collector initialized. [ 1.139459] microcode: sig=0x506e3, pf=0x20, revision=0xc6 [ 1.139600] microcode: Microcode Update Driver: v2.2. [ 1.139607] sched_clock: Marking stable (1139598677, 0)->(1137161266, 2437411) [ 1.139833] registered taskstats version 1 [ 1.139840] Loading compiled-in X.509 certificates [ 1.141404] Loaded X.509 cert 'Build time autogenerated kernel key: 71f56ec5e3f39dd32e8c2bb37e2e1415ef8085e8' [ 1.142079] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring [ 1.142089] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring [ 1.142096] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring [ 1.142110] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.142123] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.143092] zswap: loaded using pool lzo/zbud [ 1.145309] Key type big_key registered [ 1.145311] Key type trusted registered [ 1.146289] Key type encrypted registered [ 1.146290] AppArmor: AppArmor sha1 policy hashing enabled [ 1.157467] ima: Allocated hash algorithm: sha1 [ 1.266111] evm: Initialising EVM extended attributes: [ 1.266112] evm: security.selinux [ 1.266113] evm: security.SMACK64 [ 1.266113] evm: security.SMACK64EXEC [ 1.266113] evm: security.SMACK64TRANSMUTE [ 1.266113] evm: security.SMACK64MMAP [ 1.266114] evm: security.apparmor [ 1.266114] evm: security.ima [ 1.266114] evm: security.capability [ 1.266115] evm: HMAC attrs: 0x1 [ 1.266763] Magic number: 11:494:977 [ 1.266995] rtc_cmos 00:02: setting system clock to 2019-03-31 07:57:57 UTC (1554019077) [ 1.420285] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.668320] Freeing unused kernel image memory: 2464K [ 1.676410] Write protecting the kernel read-only data: 20480k [ 1.676726] usb 2-4: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.41 [ 1.676727] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.676728] usb 2-4: Product: Lenovo ThinkPad Dock [ 1.676729] usb 2-4: Manufacturer: LENOVO [ 1.677943] Freeing unused kernel image memory: 2008K [ 1.678184] Freeing unused kernel image memory: 1784K [ 1.678640] hub 2-4:1.0: USB hub found [ 1.678826] hub 2-4:1.0: 4 ports detected [ 1.684277] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.736249] ipmi message handler version 39.2 [ 1.736986] rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002) [ 1.737021] ipmi device interface [ 1.737116] ahci 0000:00:17.0: version 3.0 [ 1.738460] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.738461] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.738588] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.747346] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.747349] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 1.747984] scsi host0: ahci [ 1.749129] scsi host1: ahci [ 1.756018] scsi host2: ahci [ 1.756104] scsi host3: ahci [ 1.756133] ata1: SATA max UDMA/133 abar m2048@0xf424c000 port 0xf424c100 irq 124 [ 1.756134] ata2: DUMMY [ 1.756134] ata3: DUMMY [ 1.756135] ata4: DUMMY [ 1.765680] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 1.766264] checking generic (c0000000 e10000) vs hw (c0000000 20000000) [ 1.766265] fb: switching to inteldrmfb from EFI VGA [ 1.766277] Console: switching to colour dummy device 80x25 [ 1.766330] [drm] Replacing VGA console driver [ 1.800069] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.815072] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.818714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.818714] [drm] Driver supports precise vblank timestamp query. [ 1.818779] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 1.819146] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 1.826547] random: fast init done [ 1.826859] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.826867] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.826870] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.838011] PKCS#7 signature not signed with a trusted key [ 1.838024] nvidia: loading out-of-tree module taints kernel. [ 1.838056] nvidia: module license 'NVIDIA' taints kernel. [ 1.838056] Disabling lock debugging due to kernel taint [ 1.839755] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 1.839890] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 1.840313] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input6 [ 1.844293] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.844467] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 1.860541] fbcon: inteldrmfb (fb0) is primary device [ 1.860580] Console: switching to colour frame buffer device 320x90 [ 1.860615] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.872451] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 1.876614] nvidia-nvlink: Nvlink Core is being initialized, major device number 240 [ 1.876830] nvidia 0000:02:00.0: enabling device (0004 -> 0007) [ 1.881433] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:31:28:c3 [ 1.881434] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.881529] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF [ 1.882119] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.953506] usb 1-3: New USB device found, idVendor=17ef, idProduct=1010, bcdDevice=50.40 [ 1.953507] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.953508] usb 1-3: Product: Lenovo ThinkPad Dock [ 1.953509] usb 1-3: Manufacturer: LENOVO [ 1.954141] hub 1-3:1.0: USB hub found [ 1.954491] hub 1-3:1.0: 4 ports detected [ 1.976379] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 [ 1.981858] PKCS#7 signature not signed with a trusted key [ 1.982999] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 418.56 Fri Mar 15 12:32:40 CDT 2019 [ 1.983492] PKCS#7 signature not signed with a trusted key [ 1.983847] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver [ 1.999964] ACPI Warning: \_SB.PCI0.PEG2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180531/nsarguments-66) [ 2.071206] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.073279] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.073281] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.073391] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 2.073773] ata1.00: supports DRM functions and may not be fully accessible [ 2.074847] ata1.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max UDMA/133 [ 2.074848] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.077831] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.077832] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.077967] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 2.078358] ata1.00: supports DRM functions and may not be fully accessible [ 2.081741] ata1.00: configured for UDMA/133 [ 2.091862] ahci 0000:00:17.0: port does not support device sleep [ 2.092040] usb 1-6: new full-speed USB device number 3 using xhci_hcd [ 2.092152] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5 [ 2.092496] ata1.00: Enabling discard_zeroes_data [ 2.092520] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.092524] sd 0:0:0:0: [sda] Write Protect is off [ 2.092525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.092548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.092587] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.092672] ata1.00: Enabling discard_zeroes_data [ 2.094988] sda: sda1 sda2 sda3 sda4 [ 2.095187] ata1.00: Enabling discard_zeroes_data [ 2.096411] sd 0:0:0:0: [sda] supports TCG Opal [ 2.096411] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.241748] usb 1-6: New USB device found, idVendor=138a, idProduct=0090, bcdDevice= 1.64 [ 2.241749] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.241750] usb 1-6: SerialNumber: 5f89888914e7 [ 2.274332] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.274333] [drm] No driver support for vblank timestamp query. [ 2.274335] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 1 [ 2.320425] usb 2-4.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 2.341383] usb 2-4.1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 [ 2.341384] usb 2-4.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.341385] usb 2-4.1: Product: ASM1156-PM [ 2.341385] usb 2-4.1: Manufacturer: ASMT [ 2.341386] usb 2-4.1: SerialNumber: 00000000000000000000 [ 2.346306] usbcore: registered new interface driver usb-storage [ 2.351735] scsi host4: uas [ 2.351788] usbcore: registered new interface driver uas [ 2.355162] scsi 4:0:0:0: Direct-Access ASMT ASM1156-PM 0 PQ: 0 ANSI: 6 [ 2.360428] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 2.366677] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 2.366679] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.366811] sd 4:0:0:0: [sdb] Write Protect is off [ 2.366812] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 2.367141] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.434002] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 [ 2.436034] usb 1-3.4: new high-speed USB device number 4 using xhci_hcd [ 2.442405] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.548970] usb 1-3.4: New USB device found, idVendor=17ef, idProduct=100f, bcdDevice= 0.01 [ 2.548971] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.548972] usb 1-3.4: Product: Lenovo ThinkPad Dock [ 2.548972] usb 1-3.4: Manufacturer: Lenovo [ 2.548973] usb 1-3.4: SerialNumber: Rev1.2 [ 2.549722] hub 1-3.4:1.0: USB hub found [ 2.549763] hub 1-3.4:1.0: 3 ports detected [ 2.626267] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 2.658982] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 2.658986] psmouse serio1: synaptics: Your touchpad (PNP: LEN2018 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.676255] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 2.723992] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf006a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2010421 [ 2.724040] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.765666] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.826114] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 2.826115] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.904116] usb 1-3.4.1: new low-speed USB device number 6 using xhci_hcd [ 3.009508] usb 1-3.4.1: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00 [ 3.009509] usb 1-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.009510] usb 1-3.4.1: Product: USB Optical Mouse [ 3.009511] usb 1-3.4.1: Manufacturer: Logitech [ 3.132137] usb 1-8: new high-speed USB device number 7 using xhci_hcd [ 3.320168] usb 1-8: New USB device found, idVendor=04f2, idProduct=b541, bcdDevice= 0.09 [ 3.320170] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.320170] usb 1-8: Product: Integrated Camera [ 3.320171] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd. [ 3.320172] usb 1-8: SerialNumber: 0001 [ 3.376377] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 3.417800] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.452008] usb 1-9: new full-speed USB device number 8 using xhci_hcd [ 3.611970] usb 1-9: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20 [ 3.611971] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.611971] usb 1-9: Product: EMV Smartcard Reader [ 3.611972] usb 1-9: Manufacturer: Generic [ 3.622351] hidraw: raw HID events driver (C) Jiri Kosina [ 3.625124] usbcore: registered new interface driver usbhid [ 3.625125] usbhid: USB HID core driver [ 3.625704] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 [ 3.626839] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.0/0003:046D:C05A.0001/input/input9 [ 3.626897] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3.4.1/input0 [ 3.703865] PKCS#7 signature not signed with a trusted key [ 3.705429] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237 [ 4.120049] raid6: sse2x1 gen() 11786 MB/s [ 4.168048] raid6: sse2x1 xor() 8740 MB/s [ 4.216048] raid6: sse2x2 gen() 14772 MB/s [ 4.264061] raid6: sse2x2 xor() 10075 MB/s [ 4.312048] raid6: sse2x4 gen() 17182 MB/s [ 4.360047] raid6: sse2x4 xor() 10281 MB/s [ 4.408049] raid6: avx2x1 gen() 24118 MB/s [ 4.456048] raid6: avx2x1 xor() 16642 MB/s [ 4.504048] raid6: avx2x2 gen() 29353 MB/s [ 4.552049] raid6: avx2x2 xor() 18364 MB/s [ 4.600048] raid6: avx2x4 gen() 33643 MB/s [ 4.648060] raid6: avx2x4 xor() 19464 MB/s [ 4.648060] raid6: using algorithm avx2x4 gen() 33643 MB/s [ 4.648061] raid6: .... xor() 19464 MB/s, rmw enabled [ 4.648062] raid6: using avx2x2 recovery algorithm [ 4.650316] xor: automatically using best checksumming function avx [ 4.662049] Btrfs loaded, crc32c=crc32c-intel [ 5.107223] random: crng init done [ 5.107224] random: 7 urandom warning(s) missed due to ratelimiting [ 5.113052] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 5.348418] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.369038] systemd[1]: Detected architecture x86-64. [ 5.372677] systemd[1]: Set hostname to . [ 5.460139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.460170] systemd[1]: Reached target User and Group Name Lookups. [ 5.460189] systemd[1]: Reached target Remote File Systems. [ 5.460214] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.461046] systemd[1]: Created slice System Slice. [ 5.461125] systemd[1]: Listening on Journal Audit Socket. [ 5.461164] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.526281] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 5.557579] lp: driver loaded but no devices found [ 5.592630] ppdev: user-space parallel port driver [ 5.599572] systemd-journald[437]: Received request to flush runtime journal from PID 1 [ 5.745831] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 5.745931] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 5.770899] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.812504] Non-volatile memory driver v1.3 [ 5.862457] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 5.862458] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 5.862459] thinkpad_acpi: ThinkPad BIOS R07ET88W (2.28 ), EC unknown [ 5.862459] thinkpad_acpi: Lenovo ThinkPad T460p, model 20FXS05500 [ 5.864668] thinkpad_acpi: radio switch found; radios are enabled [ 5.864680] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 5.864681] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 5.866890] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 5.870949] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 5.877027] thinkpad_acpi: battery 1 registered (start 45, stop 55) [ 5.877032] battery: new extension: ThinkPad Battery Extension [ 5.877071] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10 [ 5.891109] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 5.891111] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.891111] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.891112] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.891112] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.891113] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 5.895024] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.896767] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.914417] cryptd: max_cpu_qlen set to 1000 [ 5.918148] Intel(R) Wireless WiFi driver for Linux [ 5.918149] Copyright(c) 2003- 2015 Intel Corporation [ 5.918230] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002) [ 5.921606] AVX2 version of gcm_enc/dec engaged. [ 5.921606] AES CTR mode by8 optimization enabled [ 5.932617] iwlwifi 0000:03:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm [ 5.958996] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 5.968911] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.013301] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.013303] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.013305] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 6.013306] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.013307] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.013308] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 6.013309] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a [ 6.013311] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 6.026476] intel_rapl: Found RAPL domain package [ 6.026478] intel_rapl: Found RAPL domain core [ 6.026478] intel_rapl: Found RAPL domain uncore [ 6.026479] intel_rapl: Found RAPL domain dram [ 6.033352] iwlwifi 0000:03:00.0: base HW address: e4:b3:18:94:16:f5 [ 6.108647] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.108880] thermal thermal_zone3: failed to read out thermal zone (-61) [ 6.110266] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 6.311548] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 6.311581] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 6.311614] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 6.311640] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 6.311669] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 6.311705] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 6.311770] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 6.311851] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 6.311912] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 6.520120] Adding 67108860k swap on /dev/sda2. Priority:-2 extents:1 across:67108860k SSFS [ 6.590050] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 6.728245] audit: type=1400 audit(1554019082.960:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1084 comm="apparmor_parser" [ 6.728308] audit: type=1400 audit(1554019082.960:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1082 comm="apparmor_parser" [ 6.728719] audit: type=1400 audit(1554019082.960:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1081 comm="apparmor_parser" [ 6.728954] audit: type=1400 audit(1554019082.960:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1080 comm="apparmor_parser" [ 6.728955] audit: type=1400 audit(1554019082.960:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1080 comm="apparmor_parser" [ 6.728956] audit: type=1400 audit(1554019082.960:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1080 comm="apparmor_parser" [ 6.729626] audit: type=1400 audit(1554019082.960:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1085 comm="apparmor_parser" [ 6.729629] audit: type=1400 audit(1554019082.960:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1085 comm="apparmor_parser" [ 6.730444] audit: type=1400 audit(1554019082.960:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1086 comm="apparmor_parser" [ 6.730882] audit: type=1400 audit(1554019082.960:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1088 comm="apparmor_parser" [ 7.089073] media: Linux media interface: v0.10 [ 7.093944] videodev: Linux video capture interface: v2.00 [ 7.219474] Bluetooth: Core ver 2.22 [ 7.219488] NET: Registered protocol family 31 [ 7.219489] Bluetooth: HCI device and connection manager initialized [ 7.219491] Bluetooth: HCI socket layer initialized [ 7.219493] Bluetooth: L2CAP socket layer initialized [ 7.219498] Bluetooth: SCO socket layer initialized [ 7.580327] usbcore: registered new interface driver btusb [ 7.581463] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 7.588464] Bluetooth: hci0: Device revision is 5 [ 7.588465] Bluetooth: hci0: Secure boot is enabled [ 7.588465] Bluetooth: hci0: OTP lock is enabled [ 7.588466] Bluetooth: hci0: API lock is enabled [ 7.588466] Bluetooth: hci0: Debug lock is disabled [ 7.588467] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 7.598376] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b541) [ 7.605978] uvcvideo: Failed to initialize entity for entity 6 [ 7.605979] uvcvideo: Failed to register entites (-22). [ 7.606040] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input20 [ 7.606098] usbcore: registered new interface driver uvcvideo [ 7.606099] USB Video Class driver (1.1.1) [ 7.631243] vboxdrv: Found 8 processor cores [ 7.652227] vboxdrv: TSC mode is Invariant, tentative frequency 2592000433 Hz [ 7.652228] vboxdrv: Successfully loaded version 6.0.4 (interface 0x00290008) [ 7.854691] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 8.009369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.009369] Bluetooth: BNEP filters: protocol multicast [ 8.009372] Bluetooth: BNEP socket layer initialized [ 8.825069] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 9.016270] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 9.063575] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 9.074205] aufs 4.18-20180910 [ 9.295848] Bluetooth: hci0: Waiting for firmware download to complete [ 9.296493] Bluetooth: hci0: Firmware loaded in 1675937 usecs [ 9.296565] Bluetooth: hci0: Waiting for device to boot [ 9.304156] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 9.308475] Bluetooth: hci0: Device booted in 11612 usecs [ 9.350329] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 9.354452] Bluetooth: hci0: Applying Intel DDC parameters completed [ 9.419566] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 10.981187] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 11.854350] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 11.854402] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 12.184216] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 12.869721] wlp3s0: authenticate with e8:df:70:71:eb:92 [ 12.879222] wlp3s0: send auth to e8:df:70:71:eb:92 (try 1/3) [ 12.886438] wlp3s0: authenticated [ 12.892062] wlp3s0: associate with e8:df:70:71:eb:92 (try 1/3) [ 12.897000] wlp3s0: RX AssocResp from e8:df:70:71:eb:92 (capab=0x1431 status=0 aid=3) [ 12.900827] wlp3s0: associated [ 12.925356] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:71:eb:92 [ 12.949510] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 13.552654] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [ 14.616020] kauditd_printk_skb: 23 callbacks suppressed [ 14.616021] audit: type=1400 audit(1554019090.844:35): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1303 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 14.632423] audit: type=1400 audit(1554019090.864:36): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1303 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 14.884699] usb 1-6: reset full-speed USB device number 3 using xhci_hcd [ 22.669771] audit: type=1400 audit(1554019098.900:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2252 comm="apparmor_parser" [ 22.763340] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 22.766849] Bridge firewalling registered [ 22.793495] bpfilter: Loaded bpfilter_umh pid 2295 [ 23.000957] Initializing XFRM netlink socket [ 23.109391] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 23.709096] PKCS#7 signature not signed with a trusted key [ 23.949925] Bluetooth: RFCOMM TTY layer initialized [ 23.949938] Bluetooth: RFCOMM socket layer initialized [ 23.949949] Bluetooth: RFCOMM ver 1.11 [ 28.687534] EXT4-fs (sdb4): recovery complete [ 28.687753] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 52.520490] usb 1-7: USB disconnect, device number 5 [ 125.500940] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 262.640074] usb 1-6: reset full-speed USB device number 3 using xhci_hcd [ 285.908339] usb 1-6: reset full-speed USB device number 3 using xhci_hcd [ 354.754470] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 471.098730] usb 1-6: reset full-speed USB device number 3 using xhci_hcd Legen Sie Ihren Finger auf den Fingerabdruckleser