Error observed in BIOS:
Embedded RAID : Smart Array P440ar Controller - (2048 MB, V2.52) -
Operation Failed - 1719-Slot 0 Drive Array  - A controller failure event
occurred prior to this power-up. (Previous lock up code = 0x13) 

* PROBLEM with:
root@snorlax# lspci -nnvs 03:00.0
03:00.0 Serial Attached SCSI controller [0107]: Hewlett-Packard Company Device [103c:3239] (rev 01)
        Subsystem: Hewlett-Packard Company Device [103c:21c0]

=> ctrl slot=0 pd all show
Smart Array P440ar in Slot 0 (Embedded) (HBA Mode)
   HBA Drives
      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 500 GB, OK)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 500 GB, OK)

=> ctrl slot=0 ld all show detail
Error: The specified device does not have any logical drives.

=> ctrl slot=0 show detail
Smart Array P440ar in Slot 0 (Embedded) (HBA Mode)
  Bus Interface: PCI
  Slot: 0
  Serial Number: PDNLH0BRH8T02D
  Cache Serial Number: PDNLH0BRH8T02D
  Controller Status: OK
  Hardware Revision: B
  Firmware Version: 6.60
  Controller Temperature (C): 37
  Cache Module Temperature (C): 33
  Number of Ports: 2 Internal only
  Driver Name: hpsa
  Driver Version: 3.4.10
  HBA Mode Enabled: True
  PCI Address (Domain:Bus:Device.Function): 0000:03:00.0
  Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
  Controller Mode: HBA
  Controller Mode Reboot: Not Required
  Current Power Mode: MaxPerformance
  Host Serial Number: MXQ52705PX