[ 0.000000] Linux version 4.18.0-13-generic (buildd@lcy01-amd64-024) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #14~18.04.1-Ubuntu SMP Thu Dec 6 14:09:52 UTC 2018 (Ubuntu 4.18.0-13.14~18.04.1-generic 4.18.17) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/mythnew-root ro verbose drm_kms_helper.edid_firmware=HDMI-A-3:edid/panasonic.edid [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005b8cffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005b8d0000-0x000000005b9ccfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005b9cd000-0x000000005bb4cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000005bb4d000-0x000000005bf59fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005bf5a000-0x000000005ce50fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005ce51000-0x000000005cee6fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000005cee7000-0x000000005effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x5beda000 ACPI=0x5beda000 SMBIOS=0x5cd19000 SMBIOS 3.0=0x5cd18000 MEMATTR=0x59fb7018 ESRT=0x5a1ab198 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.2.1 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B450M S2H/B450M S2H, BIOS F2c 12/04/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x21f340 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000220000000 aka 8704M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0x5f000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x000000005a1ab198 to 0x000000005a1ab1d0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x18e35f000, 0x18e35ffff] PGTABLE [ 0.000000] BRK [0x18e360000, 0x18e360fff] PGTABLE [ 0.000000] BRK [0x18e361000, 0x18e361fff] PGTABLE [ 0.000000] BRK [0x18e362000, 0x18e362fff] PGTABLE [ 0.000000] BRK [0x18e363000, 0x18e363fff] PGTABLE [ 0.000000] BRK [0x18e364000, 0x18e364fff] PGTABLE [ 0.000000] BRK [0x18e365000, 0x18e365fff] PGTABLE [ 0.000000] BRK [0x18e366000, 0x18e366fff] PGTABLE [ 0.000000] BRK [0x18e367000, 0x18e367fff] PGTABLE [ 0.000000] BRK [0x18e368000, 0x18e368fff] PGTABLE [ 0.000000] BRK [0x18e369000, 0x18e369fff] PGTABLE [ 0.000000] BRK [0x18e36a000, 0x18e36afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3127b000-0x34934fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000005BEDA000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000005BEDA0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000005BEE0E38 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624) [ 0.000000] ACPI: DSDT 0x000000005BEDA1F0 006C41 (v02 ALASKA A M I 01072009 INTL 20160930) [ 0.000000] ACPI: FACS 0x000000005BF43D80 000040 [ 0.000000] ACPI: APIC 0x000000005BEE0F50 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000005BEE1030 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000005BEE1078 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000005BEE1118 005419 (v02 ALASKA A M I 00000002 MSFT 02000002) [ 0.000000] ACPI: SSDT 0x000000005BEE6538 0008E0 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x000000005BEE6E18 000490 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x000000005BEE72A8 000029 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x000000005BEE72D8 002DB7 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: MCFG 0x000000005BEEA090 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 0x000000005BEEA0D0 0055B7 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: HPET 0x000000005BEEF688 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x000000005BEEF6C0 000048 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: IVRS 0x000000005BEEF708 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x000000005BEEF7D8 0012A1 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: SSDT 0x000000005BEF0A80 00149B (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: SSDT 0x000000005BEF1F20 001CA0 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: SSDT 0x000000005BEF3BC0 0000BF (v01 ALASKA A M I 00001000 INTL 20160930) [ 0.000000] ACPI: WSMT 0x000000005BEF3C80 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f33ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.000000] node 0: [mem 0x000000000a20a000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x000000005b8cffff] [ 0.000000] node 0: [mem 0x000000005b9cd000-0x000000005bb4cfff] [ 0.000000] node 0: [mem 0x000000005cee7000-0x000000005effffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f33ffff] [ 0.000000] Reserved but unavailable: 10274 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff] [ 0.000000] On node 0 totalpages: 1559326 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5921 pages used for memmap [ 0.000000] DMA32 zone: 378943 pages, LIFO batch:31 [ 0.000000] Normal zone: 18381 pages used for memmap [ 0.000000] Normal zone: 1176384 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x5b8d0000-0x5b9ccfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5bb4d000-0x5bf59fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5bf5a000-0x5ce50fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5ce51000-0x5cee6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1534934 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/mythnew-root ro verbose drm_kms_helper.edid_firmware=HDMI-A-3:edid/panasonic.edid [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5930444K/6237304K available (12300K kernel code, 2633K rwdata, 4360K rodata, 2448K init, 2340K bss, 306860K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] ftrace: allocating 40815 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] Switched APIC routing to physical flat. [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Fast TSC calibration using PIT [ 0.032000] tsc: Detected 3193.862 MHz processor [ 0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e09a371558, max_idle_ns: 440795229307 ns [ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.72 BogoMIPS (lpj=12775448) [ 0.032000] pid_max: default: 32768 minimum: 301 [ 0.032000] Security Framework initialized [ 0.032000] Yama: becoming mindful. [ 0.032000] AppArmor: AppArmor initialized [ 0.032000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.036471] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.036567] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.036594] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.037230] mce: CPU supports 23 MCE banks [ 0.037250] LVT offset 1 assigned for vector 0xf9 [ 0.037302] LVT offset 2 assigned for vector 0xf4 [ 0.037314] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.037316] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.037319] Spectre V2 : Mitigation: Full AMD retpoline [ 0.037321] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.037323] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.037326] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.045580] Freeing SMP alternatives memory: 36K [ 0.052000] smpboot: CPU0: AMD Athlon 200GE with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0) [ 0.052000] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.052000] ... version: 0 [ 0.052000] ... bit width: 48 [ 0.052000] ... generic registers: 6 [ 0.052000] ... value mask: 0000ffffffffffff [ 0.052000] ... max period: 00007fffffffffff [ 0.052000] ... fixed-purpose events: 0 [ 0.052000] ... event mask: 000000000000003f [ 0.052000] Hierarchical SRCU implementation. [ 0.052000] smp: Bringing up secondary CPUs ... [ 0.052000] x86: Booting SMP configuration: [ 0.052000] .... node #0, CPUs: #1 [ 0.054167] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.054211] #2 #3 [ 0.058404] smp: Brought up 1 node, 4 CPUs [ 0.058404] smpboot: Max logical packages: 4 [ 0.058404] smpboot: Total of 4 processors activated (25550.89 BogoMIPS) [ 0.060169] devtmpfs: initialized [ 0.060169] x86/mm: Memory block size: 128MB [ 0.060835] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes) [ 0.060835] PM: Registering ACPI NVS region [mem 0x5bb4d000-0x5bf59fff] (4247552 bytes) [ 0.060835] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.060835] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.060835] pinctrl core: initialized pinctrl subsystem [ 0.060871] RTC time: 5:24:07, date: 01/02/19 [ 0.061341] NET: Registered protocol family 16 [ 0.061442] audit: initializing netlink subsys (disabled) [ 0.061448] audit: type=2000 audit(1546406646.060:1): state=initialized audit_enabled=0 res=1 [ 0.061448] cpuidle: using governor ladder [ 0.061448] cpuidle: using governor menu [ 0.061448] ACPI: bus type PCI registered [ 0.061448] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.061448] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.061448] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.061448] PCI: Using configuration type 1 for base access [ 0.064867] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.064867] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064867] ACPI: Added _OSI(Module Device) [ 0.064867] ACPI: Added _OSI(Processor Device) [ 0.064867] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064867] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064867] ACPI: Added _OSI(Linux-Dell-Video) [ 0.064867] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.076634] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.079678] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.085195] ACPI: Interpreter enabled [ 0.085213] ACPI: (supports S0 S3 S4 S5) [ 0.085215] ACPI: Using IOAPIC for interrupt routing [ 0.085665] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.085955] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.089181] ACPI: Power Resource [P0ST] (on) [ 0.089225] ACPI: Power Resource [P3ST] (on) [ 0.097869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.097877] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.098116] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.098344] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.098360] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.098812] PCI host bridge to bus 0000:00 [ 0.098816] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.098819] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.098822] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.098825] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.098828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.098832] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.098835] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.098838] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.098842] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.098853] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.098996] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.099183] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.099306] pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400 [ 0.099359] pci 0000:00:01.1: enabling Extended Tags [ 0.099421] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.099569] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.099623] pci 0000:00:01.2: enabling Extended Tags [ 0.099685] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.099829] pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400 [ 0.099882] pci 0000:00:01.3: enabling Extended Tags [ 0.099944] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.100125] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.100257] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.100313] pci 0000:00:08.1: enabling Extended Tags [ 0.100372] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.100520] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.100574] pci 0000:00:08.2: enabling Extended Tags [ 0.100631] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.100795] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.100996] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.101193] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.101269] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.101337] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.101401] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.101465] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.101537] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.101610] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.101674] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.101857] pci 0000:01:00.0: [1b4b:9230] type 00 class 0x010601 [ 0.101879] pci 0000:01:00.0: reg 0x10: [io 0xf050-0xf057] [ 0.101889] pci 0000:01:00.0: reg 0x14: [io 0xf040-0xf043] [ 0.101898] pci 0000:01:00.0: reg 0x18: [io 0xf030-0xf037] [ 0.101908] pci 0000:01:00.0: reg 0x1c: [io 0xf020-0xf023] [ 0.101917] pci 0000:01:00.0: reg 0x20: [io 0xf000-0xf01f] [ 0.101927] pci 0000:01:00.0: reg 0x24: [mem 0xf7d10000-0xf7d107ff] [ 0.101936] pci 0000:01:00.0: reg 0x30: [mem 0xf7d00000-0xf7d0ffff pref] [ 0.101949] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1 [ 0.101996] pci 0000:01:00.0: PME# supported from D3hot [ 0.102103] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.102110] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.102113] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.102205] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330 [ 0.102238] pci 0000:02:00.0: reg 0x10: [mem 0xf75a0000-0xf75a7fff 64bit] [ 0.102293] pci 0000:02:00.0: enabling Extended Tags [ 0.102358] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.102470] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601 [ 0.102541] pci 0000:02:00.1: reg 0x24: [mem 0xf7580000-0xf759ffff] [ 0.102552] pci 0000:02:00.1: reg 0x30: [mem 0xf7500000-0xf757ffff pref] [ 0.102561] pci 0000:02:00.1: enabling Extended Tags [ 0.102615] pci 0000:02:00.1: PME# supported from D3hot D3cold [ 0.102697] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400 [ 0.102755] pci 0000:02:00.2: enabling Extended Tags [ 0.102813] pci 0000:02:00.2: PME# supported from D3hot D3cold [ 0.102962] pci 0000:00:01.2: PCI bridge to [bus 02-09] [ 0.102969] pci 0000:00:01.2: bridge window [io 0xe000-0xefff] [ 0.102973] pci 0000:00:01.2: bridge window [mem 0xf6c00000-0xf75fffff] [ 0.103116] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400 [ 0.103180] pci 0000:03:00.0: enabling Extended Tags [ 0.103249] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.103370] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400 [ 0.103434] pci 0000:03:01.0: enabling Extended Tags [ 0.103503] pci 0000:03:01.0: PME# supported from D3hot D3cold [ 0.103621] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400 [ 0.103684] pci 0000:03:04.0: enabling Extended Tags [ 0.103752] pci 0000:03:04.0: PME# supported from D3hot D3cold [ 0.103867] pci 0000:03:05.0: [1022:43c7] type 01 class 0x060400 [ 0.103931] pci 0000:03:05.0: enabling Extended Tags [ 0.103999] pci 0000:03:05.0: PME# supported from D3hot D3cold [ 0.104116] pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400 [ 0.104179] pci 0000:03:06.0: enabling Extended Tags [ 0.104248] pci 0000:03:06.0: PME# supported from D3hot D3cold [ 0.104365] pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400 [ 0.104428] pci 0000:03:07.0: enabling Extended Tags [ 0.104496] pci 0000:03:07.0: PME# supported from D3hot D3cold [ 0.104624] pci 0000:02:00.2: PCI bridge to [bus 03-09] [ 0.104633] pci 0000:02:00.2: bridge window [io 0xe000-0xefff] [ 0.104636] pci 0000:02:00.2: bridge window [mem 0xf6c00000-0xf74fffff] [ 0.104695] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.104778] pci 0000:03:01.0: PCI bridge to [bus 05] [ 0.104848] pci 0000:03:04.0: PCI bridge to [bus 06] [ 0.104916] pci 0000:03:05.0: PCI bridge to [bus 07] [ 0.105007] pci 0000:08:00.0: [1131:7164] type 00 class 0x048000 [ 0.105067] pci 0000:08:00.0: reg 0x10: [mem 0xf7000000-0xf73fffff 64bit] [ 0.105092] pci 0000:08:00.0: reg 0x18: [mem 0xf6c00000-0xf6ffffff 64bit] [ 0.105268] pci 0000:08:00.0: supports D1 D2 [ 0.105269] pci 0000:08:00.0: PME# supported from D0 D1 D2 [ 0.116048] pci 0000:03:06.0: PCI bridge to [bus 08] [ 0.116067] pci 0000:03:06.0: bridge window [mem 0xf6c00000-0xf73fffff] [ 0.116190] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000 [ 0.116250] pci 0000:09:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.116302] pci 0000:09:00.0: reg 0x18: [mem 0xf7404000-0xf7404fff 64bit] [ 0.116334] pci 0000:09:00.0: reg 0x20: [mem 0xf7400000-0xf7403fff 64bit] [ 0.116516] pci 0000:09:00.0: supports D1 D2 [ 0.116518] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116765] pci 0000:03:07.0: PCI bridge to [bus 09] [ 0.116777] pci 0000:03:07.0: bridge window [io 0xe000-0xefff] [ 0.116782] pci 0000:03:07.0: bridge window [mem 0xf7400000-0xf74fffff] [ 0.116947] pci 0000:0a:00.0: [144d:a804] type 00 class 0x010802 [ 0.116987] pci 0000:0a:00.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.117300] pci 0000:00:01.3: PCI bridge to [bus 0a] [ 0.117313] pci 0000:00:01.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.117515] pci 0000:0b:00.0: [1002:15dd] type 00 class 0x030000 [ 0.117571] pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.117594] pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.117609] pci 0000:0b:00.0: reg 0x20: [io 0xd000-0xd0ff] [ 0.117625] pci 0000:0b:00.0: reg 0x24: [mem 0xf7a00000-0xf7a7ffff] [ 0.117649] pci 0000:0b:00.0: enabling Extended Tags [ 0.117666] pci 0000:0b:00.0: BAR 0: assigned to efifb [ 0.117775] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.117920] pci 0000:0b:00.1: [1002:15de] type 00 class 0x040300 [ 0.117950] pci 0000:0b:00.1: reg 0x10: [mem 0xf7a80000-0xf7a83fff] [ 0.118026] pci 0000:0b:00.1: enabling Extended Tags [ 0.118096] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.118184] pci 0000:0b:00.2: [1022:15df] type 00 class 0x108000 [ 0.118236] pci 0000:0b:00.2: reg 0x18: [mem 0xf7900000-0xf79fffff] [ 0.118270] pci 0000:0b:00.2: reg 0x24: [mem 0xf7a84000-0xf7a85fff] [ 0.118291] pci 0000:0b:00.2: enabling Extended Tags [ 0.118470] pci 0000:0b:00.3: [1022:15e0] type 00 class 0x0c0330 [ 0.118507] pci 0000:0b:00.3: reg 0x10: [mem 0xf7800000-0xf78fffff 64bit] [ 0.118572] pci 0000:0b:00.3: enabling Extended Tags [ 0.118650] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.118767] pci 0000:0b:00.4: [1022:15e1] type 00 class 0x0c0330 [ 0.118803] pci 0000:0b:00.4: reg 0x10: [mem 0xf7700000-0xf77fffff 64bit] [ 0.118867] pci 0000:0b:00.4: enabling Extended Tags [ 0.118945] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold [ 0.119102] pci 0000:00:08.1: PCI bridge to [bus 0b] [ 0.119109] pci 0000:00:08.1: bridge window [io 0xd000-0xdfff] [ 0.119113] pci 0000:00:08.1: bridge window [mem 0xf7700000-0xf7afffff] [ 0.119119] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.119224] pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601 [ 0.119310] pci 0000:0c:00.0: reg 0x24: [mem 0xf7b00000-0xf7b007ff] [ 0.119331] pci 0000:0c:00.0: enabling Extended Tags [ 0.119410] pci 0000:0c:00.0: PME# supported from D3hot D3cold [ 0.119545] pci 0000:00:08.2: PCI bridge to [bus 0c] [ 0.119555] pci 0000:00:08.2: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.120275] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120356] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120426] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120513] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120590] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120655] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120720] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.120789] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.121690] SCSI subsystem initialized [ 0.121707] libata version 3.00 loaded. [ 0.121707] pci 0000:0b:00.0: vgaarb: setting as boot VGA device [ 0.121707] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.121707] pci 0000:0b:00.0: vgaarb: bridge control possible [ 0.121707] vgaarb: loaded [ 0.121707] ACPI: bus type USB registered [ 0.121707] usbcore: registered new interface driver usbfs [ 0.121707] usbcore: registered new interface driver hub [ 0.121707] usbcore: registered new device driver usb [ 0.121707] pps_core: LinuxPPS API ver. 1 registered [ 0.121707] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.121707] PTP clock support registered [ 0.121707] EDAC MC: Ver: 3.0.0 [ 0.121707] Registered efivars operations [ 0.137574] PCI: Using ACPI for IRQ routing [ 0.138795] PCI: pci_cache_line_size set to 64 bytes [ 0.138909] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 0.138910] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.138911] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.138911] e820: reserve RAM buffer [mem 0x5b8d0000-0x5bffffff] [ 0.138912] e820: reserve RAM buffer [mem 0x5bb4d000-0x5bffffff] [ 0.138913] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff] [ 0.138913] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff] [ 0.139040] NetLabel: Initializing [ 0.139042] NetLabel: domain hash size = 128 [ 0.139044] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.140028] NetLabel: unlabeled traffic allowed by default [ 0.140051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.140056] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.142097] clocksource: Switched to clocksource tsc-early [ 0.155135] VFS: Disk quotas dquot_6.6.0 [ 0.155184] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.155366] AppArmor: AppArmor Filesystem Enabled [ 0.155414] pnp: PnP ACPI init [ 0.155598] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.155605] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.155679] system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved [ 0.155684] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.155826] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.156013] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.156016] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.156019] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.156024] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.156414] pnp 00:04: [dma 0 disabled] [ 0.156454] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.156731] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.156735] system 00:05: [io 0x040b] has been reserved [ 0.156737] system 00:05: [io 0x04d6] has been reserved [ 0.156740] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.156742] system 00:05: [io 0x0c14] has been reserved [ 0.156744] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.156747] system 00:05: [io 0x0c52] has been reserved [ 0.156749] system 00:05: [io 0x0c6c] has been reserved [ 0.156751] system 00:05: [io 0x0c6f] has been reserved [ 0.156753] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.156756] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.156758] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.156760] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.156763] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.156765] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.156768] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.156770] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.156773] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.156775] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.156778] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.156781] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.156783] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.156786] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.156788] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.156791] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.156793] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.156798] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.157328] pnp: PnP ACPI: found 6 devices [ 0.163394] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.163508] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.163513] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.163520] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.163532] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.163548] pci 0000:03:01.0: PCI bridge to [bus 05] [ 0.163563] pci 0000:03:04.0: PCI bridge to [bus 06] [ 0.163577] pci 0000:03:05.0: PCI bridge to [bus 07] [ 0.163592] pci 0000:03:06.0: PCI bridge to [bus 08] [ 0.163599] pci 0000:03:06.0: bridge window [mem 0xf6c00000-0xf73fffff] [ 0.163610] pci 0000:03:07.0: PCI bridge to [bus 09] [ 0.163614] pci 0000:03:07.0: bridge window [io 0xe000-0xefff] [ 0.163620] pci 0000:03:07.0: bridge window [mem 0xf7400000-0xf74fffff] [ 0.163631] pci 0000:02:00.2: PCI bridge to [bus 03-09] [ 0.163635] pci 0000:02:00.2: bridge window [io 0xe000-0xefff] [ 0.163642] pci 0000:02:00.2: bridge window [mem 0xf6c00000-0xf74fffff] [ 0.163652] pci 0000:00:01.2: PCI bridge to [bus 02-09] [ 0.163656] pci 0000:00:01.2: bridge window [io 0xe000-0xefff] [ 0.163662] pci 0000:00:01.2: bridge window [mem 0xf6c00000-0xf75fffff] [ 0.163672] pci 0000:00:01.3: PCI bridge to [bus 0a] [ 0.163678] pci 0000:00:01.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.163689] pci 0000:00:08.1: PCI bridge to [bus 0b] [ 0.163693] pci 0000:00:08.1: bridge window [io 0xd000-0xdfff] [ 0.163699] pci 0000:00:08.1: bridge window [mem 0xf7700000-0xf7afffff] [ 0.163704] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.163713] pci 0000:00:08.2: PCI bridge to [bus 0c] [ 0.163719] pci 0000:00:08.2: bridge window [mem 0xf7b00000-0xf7bfffff] [ 0.163730] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.163731] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.163733] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.163734] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.163735] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.163736] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.163738] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.163739] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.163741] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.163742] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.163743] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.163744] pci_bus 0000:02: resource 1 [mem 0xf6c00000-0xf75fffff] [ 0.163745] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.163746] pci_bus 0000:03: resource 1 [mem 0xf6c00000-0xf74fffff] [ 0.163747] pci_bus 0000:08: resource 1 [mem 0xf6c00000-0xf73fffff] [ 0.163749] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 0.163750] pci_bus 0000:09: resource 1 [mem 0xf7400000-0xf74fffff] [ 0.163751] pci_bus 0000:0a: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.163752] pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff] [ 0.163753] pci_bus 0000:0b: resource 1 [mem 0xf7700000-0xf7afffff] [ 0.163754] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.163755] pci_bus 0000:0c: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 0.164005] NET: Registered protocol family 2 [ 0.164368] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.164395] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.164500] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.164654] TCP: Hash tables configured (established 65536 bind 65536) [ 0.164723] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.164749] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.164857] NET: Registered protocol family 1 [ 0.164863] NET: Registered protocol family 44 [ 0.165102] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.165112] pci 0000:0b:00.1: Linked as a consumer to 0000:0b:00.0 [ 0.165407] PCI: CLS 64 bytes, default 64 [ 0.165438] Unpacking initramfs... [ 0.851324] Freeing initrd memory: 56040K [ 0.851406] AMD-Vi: Unable to write to IOMMU perf counter. [ 0.851543] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.851547] pci 0000:00:00.2: PCI INT A: not connected [ 0.852052] iommu: Adding device 0000:00:01.0 to group 0 [ 0.852279] iommu: Adding device 0000:00:01.1 to group 1 [ 0.852533] iommu: Adding device 0000:00:01.2 to group 2 [ 0.852769] iommu: Adding device 0000:00:01.3 to group 3 [ 0.853019] iommu: Adding device 0000:00:08.0 to group 4 [ 0.853242] iommu: Adding device 0000:00:08.1 to group 5 [ 0.853272] iommu: Adding device 0000:00:08.2 to group 4 [ 0.853524] iommu: Adding device 0000:00:14.0 to group 6 [ 0.853550] iommu: Adding device 0000:00:14.3 to group 6 [ 0.853801] iommu: Adding device 0000:00:18.0 to group 7 [ 0.853827] iommu: Adding device 0000:00:18.1 to group 7 [ 0.853853] iommu: Adding device 0000:00:18.2 to group 7 [ 0.853879] iommu: Adding device 0000:00:18.3 to group 7 [ 0.853932] iommu: Adding device 0000:00:18.4 to group 7 [ 0.853959] iommu: Adding device 0000:00:18.5 to group 7 [ 0.853983] iommu: Adding device 0000:00:18.6 to group 7 [ 0.854009] iommu: Adding device 0000:00:18.7 to group 7 [ 0.854254] iommu: Adding device 0000:01:00.0 to group 8 [ 0.854505] iommu: Adding device 0000:02:00.0 to group 9 [ 0.854555] iommu: Adding device 0000:02:00.1 to group 9 [ 0.854601] iommu: Adding device 0000:02:00.2 to group 9 [ 0.854626] iommu: Adding device 0000:03:00.0 to group 9 [ 0.854650] iommu: Adding device 0000:03:01.0 to group 9 [ 0.854675] iommu: Adding device 0000:03:04.0 to group 9 [ 0.854700] iommu: Adding device 0000:03:05.0 to group 9 [ 0.854725] iommu: Adding device 0000:03:06.0 to group 9 [ 0.854757] iommu: Adding device 0000:03:07.0 to group 9 [ 0.854801] iommu: Adding device 0000:08:00.0 to group 9 [ 0.854836] iommu: Adding device 0000:09:00.0 to group 9 [ 0.855055] iommu: Adding device 0000:0a:00.0 to group 10 [ 0.855373] iommu: Adding device 0000:0b:00.0 to group 11 [ 0.855458] iommu: Using direct mapping for device 0000:0b:00.0 [ 0.855569] iommu: Adding device 0000:0b:00.1 to group 12 [ 0.855623] iommu: Adding device 0000:0b:00.2 to group 12 [ 0.855669] iommu: Adding device 0000:0b:00.3 to group 12 [ 0.855714] iommu: Adding device 0000:0b:00.4 to group 12 [ 0.855740] iommu: Adding device 0000:0c:00.0 to group 4 [ 0.856089] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.856092] AMD-Vi: Extended features (0x4f77ef22294ada): [ 0.856094] PPR NX GT IA GA PC GA_vAPIC [ 0.856098] AMD-Vi: Interrupt remapping enabled [ 0.856099] AMD-Vi: virtual APIC enabled [ 0.856288] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.857201] amd_uncore: AMD NB counters detected [ 0.857208] amd_uncore: AMD LLC counters detected [ 0.857362] Scanning for low memory corruption every 60 seconds [ 0.858283] Initialise system trusted keyrings [ 0.858321] Key type blacklist registered [ 0.858405] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.860177] zbud: loaded [ 0.861043] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.861426] fuse init (API version 7.27) [ 0.861577] pstore: using deflate compression [ 0.863410] Key type asymmetric registered [ 0.863414] Asymmetric key parser 'x509' registered [ 0.863491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.863543] io scheduler noop registered [ 0.863545] io scheduler deadline registered [ 0.863604] io scheduler cfq registered (default) [ 0.865901] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ 0.865968] pcieport 0000:00:01.2: AER enabled with IRQ 27 [ 0.866000] pcieport 0000:00:01.3: AER enabled with IRQ 28 [ 0.866015] pcieport 0000:00:01.1: Signaling PME with IRQ 26 [ 0.866029] pcieport 0000:00:01.2: Signaling PME with IRQ 27 [ 0.866042] pcieport 0000:00:01.3: Signaling PME with IRQ 28 [ 0.866071] pcieport 0000:00:08.1: Signaling PME with IRQ 29 [ 0.866110] pcieport 0000:00:08.2: Signaling PME with IRQ 30 [ 0.866136] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.866193] efifb: probing for efifb [ 0.866210] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.866213] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.866215] efifb: scrolling: redraw [ 0.866217] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.868096] Console: switching to colour frame buffer device 128x48 [ 0.869633] fb0: EFI VGA frame buffer device [ 0.869762] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.869794] ACPI: Power Button [PWRB] [ 0.869847] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.869882] ACPI: Power Button [PWRF] [ 0.869949] Monitor-Mwait will be used to enter C-1 state [ 1.884330] tsc: Refined TSC clocksource calibration: 3196.743 MHz [ 1.884351] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e144515228, max_idle_ns: 440795273541 ns [ 1.884483] clocksource: Switched to clocksource tsc [ 2.877926] ACPI: Invalid passive threshold [ 2.878213] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.878237] ACPI: Thermal Zone [TZ10] (17 C) [ 2.878484] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.899406] 00:04: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.901239] Linux agpgart interface v0.103 [ 2.904109] loop: module loaded [ 2.904296] libphy: Fixed MDIO Bus: probed [ 2.904314] tun: Universal TUN/TAP device driver, 1.6 [ 2.904361] PPP generic driver version 2.4.2 [ 2.904402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.904424] ehci-pci: EHCI PCI platform driver [ 2.904453] ehci-platform: EHCI generic platform driver [ 2.904474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.904494] ohci-pci: OHCI PCI platform driver [ 2.905090] ohci-platform: OHCI generic platform driver [ 2.905699] uhci_hcd: USB Universal Host Controller Interface driver [ 2.906401] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.907018] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 2.962824] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 2.963677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.964297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.964911] usb usb1: Product: xHCI Host Controller [ 2.965526] usb usb1: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 2.966147] usb usb1: SerialNumber: 0000:02:00.0 [ 2.966910] hub 1-0:1.0: USB hub found [ 2.967561] hub 1-0:1.0: 10 ports detected [ 2.968529] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.969174] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 2.969819] xhci_hcd 0000:02:00.0: Host supports USB 3.10 Enhanced SuperSpeed [ 2.970531] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.971258] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 2.971936] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.972628] usb usb2: Product: xHCI Host Controller [ 2.973297] usb usb2: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 2.973972] usb usb2: SerialNumber: 0000:02:00.0 [ 2.974758] hub 2-0:1.0: USB hub found [ 2.975433] hub 2-0:1.0: 4 ports detected [ 2.976179] usb: port power management may be unreliable [ 2.976981] xhci_hcd 0000:0b:00.3: xHCI Host Controller [ 2.977636] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3 [ 2.978419] xhci_hcd 0000:0b:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000040000410 [ 2.979411] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.980080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.980732] usb usb3: Product: xHCI Host Controller [ 2.981374] usb usb3: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 2.982014] usb usb3: SerialNumber: 0000:0b:00.3 [ 2.982744] hub 3-0:1.0: USB hub found [ 2.983373] hub 3-0:1.0: 4 ports detected [ 2.984162] xhci_hcd 0000:0b:00.3: xHCI Host Controller [ 2.984784] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4 [ 2.985405] xhci_hcd 0000:0b:00.3: Host supports USB 3.10 Enhanced SuperSpeed [ 2.986046] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.986680] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 2.987312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.987938] usb usb4: Product: xHCI Host Controller [ 2.988574] usb usb4: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 2.989211] usb usb4: SerialNumber: 0000:0b:00.3 [ 2.989952] hub 4-0:1.0: USB hub found [ 2.990577] hub 4-0:1.0: 4 ports detected [ 2.991598] xhci_hcd 0000:0b:00.4: xHCI Host Controller [ 2.992229] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 5 [ 2.992983] xhci_hcd 0000:0b:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000040000410 [ 2.993886] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.994529] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.995165] usb usb5: Product: xHCI Host Controller [ 2.995799] usb usb5: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 2.996440] usb usb5: SerialNumber: 0000:0b:00.4 [ 2.997188] hub 5-0:1.0: USB hub found [ 2.997808] hub 5-0:1.0: 1 port detected [ 2.998510] xhci_hcd 0000:0b:00.4: xHCI Host Controller [ 2.999122] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 6 [ 2.999742] xhci_hcd 0000:0b:00.4: Host supports USB 3.10 Enhanced SuperSpeed [ 3.000387] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.001032] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 3.001671] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.002304] usb usb6: Product: xHCI Host Controller [ 3.002938] usb usb6: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 3.003568] usb usb6: SerialNumber: 0000:0b:00.4 [ 3.004316] hub 6-0:1.0: USB hub found [ 3.004933] hub 6-0:1.0: 1 port detected [ 3.005622] i8042: PNP: No PS/2 controller found. [ 3.006305] mousedev: PS/2 mouse device common for all mice [ 3.007053] rtc_cmos 00:02: RTC can wake from S4 [ 3.007940] rtc_cmos 00:02: registered as rtc0 [ 3.008573] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.009198] i2c /dev entries driver [ 3.009815] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 3.010535] device-mapper: uevent: version 1.0.3 [ 3.011267] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 3.011948] ledtrig-cpu: registered to indicate activity on CPUs [ 3.012578] EFI Variables Facility v0.08 2004-May-17 [ 3.028153] NET: Registered protocol family 10 [ 3.032389] Segment Routing with IPv6 [ 3.033037] NET: Registered protocol family 17 [ 3.033720] Key type dns_resolver registered [ 3.034622] RAS: Correctable Errors collector initialized. [ 3.035500] microcode: CPU0: patch_level=0x0810100b [ 3.036138] microcode: CPU1: patch_level=0x0810100b [ 3.036830] microcode: CPU2: patch_level=0x0810100b [ 3.037438] microcode: CPU3: patch_level=0x0810100b [ 3.038056] microcode: Microcode Update Driver: v2.2. [ 3.038078] sched_clock: Marking stable (3038053261, 0)->(3116167241, -78113980) [ 3.039401] registered taskstats version 1 [ 3.039999] Loading compiled-in X.509 certificates [ 3.042599] Loaded X.509 cert 'Build time autogenerated kernel key: 77c0221a837633ee45059fae49501cb461e67427' [ 3.046246] zswap: loaded using pool lzo/zbud [ 3.050143] Key type big_key registered [ 3.050788] Key type trusted registered [ 3.052881] Key type encrypted registered [ 3.053482] AppArmor: AppArmor sha1 policy hashing enabled [ 3.054073] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 3.054679] ima: Allocated hash algorithm: sha1 [ 3.055281] evm: Initialising EVM extended attributes: [ 3.055865] evm: security.selinux [ 3.056446] evm: security.SMACK64 [ 3.057015] evm: security.SMACK64EXEC [ 3.057587] evm: security.SMACK64TRANSMUTE [ 3.058148] evm: security.SMACK64MMAP [ 3.058704] evm: security.apparmor [ 3.059244] evm: security.ima [ 3.059769] evm: security.capability [ 3.060304] evm: HMAC attrs: 0x1 [ 3.061585] Magic number: 3:21:415 [ 3.062144] pci 0000:00:18.7: hash matches [ 3.062760] rtc_cmos 00:02: setting system clock to 2019-01-02 05:24:10 UTC (1546406650) [ 3.063419] acpi_cpufreq: overriding BIOS provided _PSD data [ 3.304035] usb 1-5: new low-speed USB device number 2 using xhci_hcd [ 3.320035] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 3.487703] usb 3-2: New USB device found, idVendor=1784, idProduct=0001, bcdDevice= 0.00 [ 3.488932] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.489654] usb 3-2: Product: eHome Infrared Transceiver [ 3.490365] usb 3-2: Manufacturer: Topseed [ 3.491048] usb 3-2: SerialNumber: TS000A9h [ 3.572323] usb 1-5: New USB device found, idVendor=0518, idProduct=0001, bcdDevice= 1.00 [ 3.573357] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.574040] usb 1-5: Product: USB-compliant keyboard [ 3.574702] usb 1-5: Manufacturer: Plus More Enterprise LTD. [ 3.626331] Freeing unused kernel image memory: 2448K [ 3.644011] Write protecting the kernel read-only data: 20480k [ 3.646630] Freeing unused kernel image memory: 2008K [ 3.647726] Freeing unused kernel image memory: 1784K [ 3.657287] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.708026] usb 1-6: new full-speed USB device number 3 using xhci_hcd [ 3.727032] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.728264] acpi device:02: registered as cooling_device4 [ 3.729145] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2 [ 3.732355] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 3.736724] ahci 0000:01:00.0: version 3.0 [ 3.736856] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS [ 3.739959] nvme nvme0: pci function 0000:0a:00.0 [ 3.743263] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.748231] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 3.749097] ahci 0000:01:00.0: flags: 64bit ncq fbs pio [ 3.751189] scsi host0: ahci [ 3.757179] r8169 0000:09:00.0 eth0: RTL8168h/8111h, b4:2e:99:1b:40:3c, XID 54100800, IRQ 59 [ 3.758068] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.759241] scsi host1: ahci [ 3.760314] scsi host2: ahci [ 3.761368] scsi host3: ahci [ 3.762205] scsi host4: ahci [ 3.762977] scsi host5: ahci [ 3.763689] scsi host6: ahci [ 3.764407] scsi host7: ahci [ 3.765050] ata1: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10100 irq 56 [ 3.765669] ata2: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10180 irq 56 [ 3.766274] ata3: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10200 irq 56 [ 3.766883] ata4: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10280 irq 56 [ 3.767486] ata5: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10300 irq 56 [ 3.768090] ata6: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10380 irq 56 [ 3.768683] ata7: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10400 irq 56 [ 3.769277] ata8: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10480 irq 56 [ 3.770096] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 3.770704] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 3.771281] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 3.772751] scsi host8: ahci [ 3.773589] scsi host9: ahci [ 3.774394] scsi host10: ahci [ 3.775177] scsi host11: ahci [ 3.775977] scsi host12: ahci [ 3.776778] scsi host13: ahci [ 3.777418] scsi host14: ahci [ 3.778040] scsi host15: ahci [ 3.778584] ata9: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 60 [ 3.779099] ata10: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 60 [ 3.779619] ata11: DUMMY [ 3.780149] ata12: DUMMY [ 3.780648] ata13: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 60 [ 3.781172] ata14: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 60 [ 3.781683] ata15: DUMMY [ 3.782180] ata16: DUMMY [ 3.783088] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 3.783597] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 3.785069] r8169 0000:09:00.0 enp9s0: renamed from eth0 [ 3.791734] [drm] drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead. [ 3.794651] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 3.795282] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 3.795900] ahci 0000:0c:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented [ 3.796951] scsi host16: ahci [ 3.797869] scsi host17: ahci [ 3.798528] ata17: SATA max UDMA/133 abar m2048@0xf7b00000 port 0xf7b00100 irq 62 [ 3.799019] ata18: SATA max UDMA/133 abar m2048@0xf7b00000 port 0xf7b00180 irq 63 [ 3.827225] [drm] amdgpu kernel modesetting enabled. [ 3.829522] AMD IOMMUv2 driver by Joerg Roedel [ 3.833059] Parsing CRAT table with 1 nodes [ 3.833568] Creating topology SYSFS entries [ 3.834077] Topology: Add APU node [0x0:0x0] [ 3.834570] Finished initializing topology [ 3.835072] kfd kfd: Initialized module [ 3.835687] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 3.835688] fb: switching to amdgpudrmfb from EFI VGA [ 3.836217] Console: switching to colour dummy device 80x25 [ 3.836475] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xCB). [ 3.836490] [drm] register mmio base: 0xF7A00000 [ 3.836492] [drm] register mmio size: 524288 [ 3.836500] [drm] probing gen 2 caps for device 1022:15db = 700d03/e [ 3.836503] [drm] probing mlw for device 1022:15db = 700d03 [ 3.836507] [drm] add ip block number 0 [ 3.836509] [drm] add ip block number 1 [ 3.836511] [drm] add ip block number 2 [ 3.836513] [drm] add ip block number 3 [ 3.836515] [drm] add ip block number 4 [ 3.836517] [drm] add ip block number 5 [ 3.836519] [drm] add ip block number 6 [ 3.836521] [drm] add ip block number 7 [ 3.836523] [drm] add ip block number 8 [ 3.836542] kfd kfd: DID 15dd is missing in supported_devices [ 3.836544] kfd kfd: kgd2kfd_probe failed [ 3.836556] [drm] VCN decode is enabled in VM mode [ 3.836558] [drm] VCN encode is enabled in VM mode [ 3.857938] [drm] BIOS signature incorrect 0 0 [ 3.857959] ATOM BIOS: 113-RAVEN-111 [ 3.857995] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 3.858008] amdgpu 0000:0b:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 3.858012] amdgpu 0000:0b:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF [ 3.858017] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 3.858019] [drm] RAM width 64bits DDR4 [ 3.858086] [TTM] Zone kernel: Available graphics memory: 3056956 kiB [ 3.858090] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.858093] [TTM] Initializing pool allocator [ 3.858098] [TTM] Initializing DMA pool allocator [ 3.858170] [drm] amdgpu: 2048M of VRAM memory ready [ 3.858173] [drm] amdgpu: 3072M of GTT memory ready. [ 3.858183] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.858368] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 3.860139] [drm] use_doorbell being set to: [true] [ 3.860286] [drm] Found VCN firmware Version: 1.73 Family ID: 18 [ 3.860299] [drm] PSP loading VCN firmware [ 3.977241] nvme0n1: p1 p2 p3 p4 [ 4.032764] amdgpu: [powerplay] dpm has been enabled [ 4.033020] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3 [ 4.051851] [drm] Display Core initialized with v3.1.44! [ 4.062547] usb 1-6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.07 [ 4.062553] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.062556] usb 1-6: Product: USB Receiver [ 4.062558] usb 1-6: Manufacturer: Logitech [ 4.077088] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.077091] [drm] Driver supports precise vblank timestamp query. [ 4.085059] hidraw: raw HID events driver (C) Jiri Kosina [ 4.086159] ata5: SATA link down (SStatus 0 SControl 300) [ 4.086187] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.086216] ata3: SATA link down (SStatus 0 SControl 300) [ 4.086238] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.086256] ata7: SATA link down (SStatus 0 SControl 300) [ 4.090138] ata6: SATA link down (SStatus 0 SControl 300) [ 4.090157] ata1: SATA link down (SStatus 0 SControl 300) [ 4.098142] ata9: SATA link down (SStatus 0 SControl 330) [ 4.100169] [drm] VCN decode and encode initialized successfully. [ 4.101457] [drm] fb mappable at 0x61100000 [ 4.101460] [drm] vram apper at 0x60000000 [ 4.101462] [drm] size 3686400 [ 4.101463] [drm] fb depth is 24 [ 4.101465] [drm] pitch is 5120 [ 4.101537] fbcon: amdgpudrmfb (fb0) is primary device [ 4.114277] ata17: SATA link down (SStatus 0 SControl 300) [ 4.122264] ata18: SATA link down (SStatus 0 SControl 300) [ 4.155370] Console: switching to colour frame buffer device 160x45 [ 4.163560] usbcore: registered new interface driver usbhid [ 4.163561] usbhid: USB HID core driver [ 4.165241] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.0/0003:0518:0001.0001/input/input3 [ 4.178144] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device [ 4.196094] amdgpu 0000:0b:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 4.196124] amdgpu 0000:0b:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 4.196151] amdgpu 0000:0b:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 4.196178] amdgpu 0000:0b:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 4.196210] amdgpu 0000:0b:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 4.196243] amdgpu 0000:0b:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 4.196272] amdgpu 0000:0b:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 4.196299] amdgpu 0000:0b:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 4.196326] amdgpu 0000:0b:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 4.196354] amdgpu 0000:0b:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 4.196381] amdgpu 0000:0b:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 4.196407] amdgpu 0000:0b:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1 [ 4.197016] amdgpu 0000:0b:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1 [ 4.197612] amdgpu 0000:0b:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1 [ 4.201567] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:0b:00.0 on minor 0 [ 4.213595] ata8.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66 [ 4.214345] ahci 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffefe840 flags=0x0050] [ 4.224237] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:02:00.0-5/input0 [ 4.225999] input: Plus More Enterprise LTD. USB-compliant keyboard Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.1/0003:0518:0001.0002/input/input4 [ 4.227487] input: Plus More Enterprise LTD. USB-compliant keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.1/0003:0518:0001.0002/input/input5 [ 4.272029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.288149] input: Plus More Enterprise LTD. USB-compliant keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.1/0003:0518:0001.0002/input/input6 [ 4.290342] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:02:00.0-5/input1 [ 4.294290] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-6/input2 [ 4.415662] input: Logitech Unifying Device. Wireless PID:1025 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0005/0003:046D:1025.0006/input/input7 [ 4.417880] hid-generic 0003:046D:1025.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:02:00.0-6:1 [ 4.473391] input: Logitech M510 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0005/0003:046D:1025.0006/input/input11 [ 4.474912] logitech-hidpp-device 0003:046D:1025.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M510] on usb-0000:02:00.0-6:1 [ 6.014054] random: fast init done [ 9.180190] ata2.00: qc timeout (cmd 0xec) [ 9.436016] ata4.00: qc timeout (cmd 0xec) [ 9.437157] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 9.680883] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 9.750762] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.494874] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 19.420317] ata8.00: qc timeout (cmd 0xef) [ 19.920181] ata8.00: failed to set xfermode (err_mask=0x4) [ 19.932032] ata4.00: qc timeout (cmd 0xec) [ 19.933331] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 19.934401] ata4: limiting SATA link speed to 1.5 Gbps [ 20.250751] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310) [ 20.700304] ata2.00: qc timeout (cmd 0xec) [ 20.732871] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.200169] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 22.015168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.820321] ata8.00: qc timeout (cmd 0xa1) [ 26.321013] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 26.322202] ata8.00: revalidation failed (errno=-5) [ 27.134592] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.340331] ata8.00: qc timeout (cmd 0xa1) [ 37.840268] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 37.841452] ata8.00: revalidation failed (errno=-5) [ 37.842628] ata8.00: disabled [ 39.154999] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 52.188187] ata4.00: qc timeout (cmd 0xec) [ 52.189838] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 52.190988] ata2.00: qc timeout (cmd 0xec) [ 52.506804] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310) [ 52.692658] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 53.506573] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 54.323569] ata10: SATA link down (SStatus 0 SControl 330) [ 54.639566] ata13: SATA link down (SStatus 0 SControl 330) [ 54.955558] ata14: SATA link down (SStatus 0 SControl 330) [ 54.957495] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 54.957517] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 54.957526] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 55.092749] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 55.247429] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 55.268447] systemd[1]: Detected architecture x86-64. [ 55.278106] systemd[1]: Set hostname to . [ 56.376246] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 56.377709] systemd[1]: Reached target User and Group Name Lookups. [ 56.379121] systemd[1]: Reached target Remote File Systems. [ 56.380884] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 56.382498] systemd[1]: Created slice System Slice. [ 56.384035] systemd[1]: Listening on LVM2 metadata daemon socket. [ 56.385580] systemd[1]: Listening on Syslog Socket. [ 56.425796] lp: driver loaded but no devices found [ 56.432329] ppdev: user-space parallel port driver [ 56.436055] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 56.481843] systemd-journald[353]: Received request to flush runtime journal from PID 1 [ 56.507907] random: crng init done [ 56.508527] random: 7 urandom warning(s) missed due to ratelimiting [ 56.720823] media: Linux media interface: v0.10 [ 56.728511] videodev: Linux video capture interface: v2.00 [ 56.738366] saa7164 driver loaded [ 56.738421] saa7164 0000:08:00.0: enabling device (0000 -> 0002) [ 56.738528] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge WinTV-HVR2200 [card=4,insmod option] [ 56.738532] saa7164[0]/0: found at 0000:08:00.0, rev: 129, irq: 31, latency: 0, mmio: 0xf7000000 [ 56.769399] cryptd: max_cpu_qlen set to 1000 [ 56.792022] Registered IR keymap rc-rc6-mce [ 56.799081] IR RC6 protocol handler initialized [ 56.803408] AVX2 version of gcm_enc/dec engaged. [ 56.803409] AES CTR mode by8 optimization enabled [ 56.864186] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0001) as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/3-2:1.0/rc/rc0 [ 56.864250] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0001) as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/3-2:1.0/rc/rc0/input12 [ 56.876927] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter [ 56.879606] Adding 8388604k swap on /dev/mapper/mythnew-swap. Priority:-2 extents:1 across:8388604k SSFS [ 56.892786] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client [ 56.898641] kvm: Nested Virtualization enabled [ 56.898646] kvm: Nested Paging enabled [ 56.898647] SVM: Virtual VMLOAD VMSAVE supported [ 56.898647] SVM: Virtual GIF supported [ 56.901059] MCE: In-kernel MCE decoding enabled. [ 56.902402] EDAC amd64: Node 0: DRAM ECC disabled. [ 56.902403] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 56.905517] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input13 [ 56.905631] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input14 [ 56.905768] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input15 [ 56.905868] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input16 [ 56.956056] saa7164_downloadfirmware() no first image [ 56.956776] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 56.957216] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 56.962103] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 56.962105] saa7164_downloadfirmware() firmware loaded. [ 56.962118] Firmware file header part 1: [ 56.962119] .FirmwareSize = 0x0 [ 56.962120] .BSLSize = 0x0 [ 56.962121] .Reserved = 0x3d538 [ 56.962134] .Version = 0x3 [ 56.962135] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 56.962142] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 56.962153] saa7164_downloadfirmware() BSLSize = 0x0 [ 56.962154] saa7164_downloadfirmware() Reserved = 0x0 [ 56.962155] saa7164_downloadfirmware() Version = 0x1661c00 [ 57.096195] mceusb 3-2:1.0: long-range (0x1) receiver active [ 57.156060] mceusb 3-2:1.0: Registered Topseed eHome Infrared Transceiver with mce emulator interface version 1 [ 57.156062] mceusb 3-2:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active) [ 57.156113] usbcore: registered new interface driver mceusb [ 57.526654] input: lircd-uinput as /devices/virtual/input/input17 [ 57.565785] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready [ 57.618605] r8169 0000:09:00.0 enp9s0: link down [ 57.618616] r8169 0000:09:00.0 enp9s0: link down [ 57.618726] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready [ 60.397069] r8169 0000:09:00.0 enp9s0: link up [ 60.397082] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready [ 63.900396] saa7164_downloadimage() Image downloaded, booting... [ 64.008046] saa7164_downloadimage() Image booted successfully. [ 64.008056] starting firmware download(2) [ 67.192297] saa7164_downloadimage() Image downloaded, booting... [ 68.596247] saa7164_downloadimage() Image booted successfully. [ 68.596260] firmware download complete. [ 68.648704] tveeprom: Hauppauge model 89619, rev D3F2, serial# 4033661368 [ 68.648707] tveeprom: MAC address is 00:0d:fe:6c:c9:b8 [ 68.648709] tveeprom: tuner model is NXP 18271C2_716x (idx 152, type 4) [ 68.648712] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 68.648714] tveeprom: audio processor is SAA7164 (idx 43) [ 68.648715] tveeprom: decoder processor is SAA7164 (idx 40) [ 68.648715] tveeprom: has radio [ 68.648717] saa7164[0]: Hauppauge eeprom: model=89619 [ 68.712675] tda18271 9-0060: creating new instance [ 68.717192] tda18271: TDA18271HD/C2 detected @ 9-0060 [ 69.024235] dvbdev: DVB: registering new adapter (saa7164) [ 69.024242] saa7164 0000:08:00.0: DVB: registering adapter 6 frontend 0 (NXP TDA10048HN DVB-T)... [ 69.054856] tda18271 10-0060: creating new instance [ 69.059638] tda18271: TDA18271HD/C2 detected @ 10-0060 [ 69.360972] tda18271: performing RF tracking filter calibration [ 71.906216] tda18271: RF tracking filter calibration complete [ 71.909205] dvbdev: DVB: registering new adapter (saa7164) [ 71.909210] saa7164 0000:08:00.0: DVB: registering adapter 7 frontend 0 (NXP TDA10048HN DVB-T)... [ 71.945197] saa7164[0]: registered device video0 [mpeg] [ 72.173415] saa7164[0]: registered device video1 [mpeg] [ 72.386073] saa7164[0]: registered device vbi0 [vbi] [ 72.386134] saa7164[0]: registered device vbi1 [vbi] [ 73.149635] tda18271: performing RF tracking filter calibration [ 75.689961] tda18271: RF tracking filter calibration complete [ 391.612198] logitech-hidpp-device 0003:046D:1025.0006: HID++ 1.0 device connected.