[ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22 [ 0.000000] Linux version 4.15.0-43-generic (buildd@lgw01-amd64-001) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #46-Ubuntu SMP Thu Dec 6 14:45:28 UTC 2018 (Ubuntu 4.15.0-43.46-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-43-generic root=/dev/mapper/kubuntu--vg-root ro resume=/dev/kubuntu-vg/swap_1 quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca7cdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca7ce000-0x00000000ca9cdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ca9ce000-0x00000000ccbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbfe000 ESRT=0xcab5a000 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20BV0064US/20BV0064US, BIOS JBET61WW (1.25 ) 07/13/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FF0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000000] 4 base 00CCE00000 mask 7FFFE00000 uncachable [ 0.000000] 5 base 00F0000000 mask 7FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xcce00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000cab5a000 to 0x00000000cab5a060. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x10a53f000, 0x10a53ffff] PGTABLE [ 0.000000] BRK [0x10a540000, 0x10a540fff] PGTABLE [ 0.000000] BRK [0x10a541000, 0x10a541fff] PGTABLE [ 0.000000] BRK [0x10a542000, 0x10a542fff] PGTABLE [ 0.000000] BRK [0x10a543000, 0x10a543fff] PGTABLE [ 0.000000] BRK [0x10a544000, 0x10a544fff] PGTABLE [ 0.000000] BRK [0x10a545000, 0x10a545fff] PGTABLE [ 0.000000] BRK [0x10a546000, 0x10a546fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3104d000-0x3481dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000CCDFE1C0 0000FC (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000CCDE3000 010FA5 (v02 LENOVO TP-JB 00001250 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000CCD68000 000040 [ 0.000000] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-JB 00001250 PTEC 00000001) [ 0.000000] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000CCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000CCDDA000 00006E (v05 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000CCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000CCDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000CCDD7000 0006B0 (v02 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000CCDD6000 000042 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000CCCB1000 000055 (v03 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000CCDD5000 000046 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000CCDD4000 000064 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000CCDD3000 0002F6 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: BGRT 0x00000000CCDD2000 000038 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000CCDD1000 0000B0 (v01 LENOVO TP-JB 00001250 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12dfd5000-0x12dffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ca7cdfff] [ 0.000000] node 0: [mem 0x00000000ccdff000-0x00000000ccdfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012dffffff] [ 0.000000] On node 0 totalpages: 1017706 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12896 pages used for memmap [ 0.000000] DMA32 zone: 825295 pages, LIFO batch:31 [ 0.000000] Normal zone: 2944 pages used for memmap [ 0.000000] Normal zone: 188416 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000ce000000-0x00000000cfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xca7ce000-0xca9cdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xca9ce000-0xccbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1001779 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-43-generic root=/dev/mapper/kubuntu--vg-root ro resume=/dev/kubuntu-vg/swap_1 quiet splash [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3775040K/4070824K available (12300K kernel code, 2472K rwdata, 4252K rodata, 2408K init, 2416K bss, 295784K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39186 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x000000cb421000 end: 0x000000cb437fff [ 0.000000] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2294.722 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.44 BogoMIPS (lpj=9178888) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.028637] Security Framework initialized [ 0.028640] Yama: becoming mindful. [ 0.028704] AppArmor: AppArmor initialized [ 0.030108] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.032114] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.032161] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032188] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032719] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.032721] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.032732] mce: CPU supports 7 MCE banks [ 0.032753] CPU0: Thermal monitoring enabled (TM1) [ 0.032783] process: using mwait in idle threads [ 0.032788] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.032790] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.032795] Spectre V2 : Mitigation: Full generic retpoline [ 0.032796] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.032797] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.032799] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.032802] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.033069] Freeing SMP alternatives memory: 36K [ 0.043225] TSC deadline timer enabled [ 0.043231] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.043413] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.043472] ... version: 3 [ 0.043474] ... bit width: 48 [ 0.043475] ... generic registers: 4 [ 0.043478] ... value mask: 0000ffffffffffff [ 0.043479] ... max period: 00007fffffffffff [ 0.043481] ... fixed-purpose events: 3 [ 0.043483] ... event mask: 000000070000000f [ 0.043571] Hierarchical SRCU implementation. [ 0.044000] smp: Bringing up secondary CPUs ... [ 0.044000] x86: Booting SMP configuration: [ 0.044000] .... node #0, CPUs: #1 [ 0.046003] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.046033] #2 #3 [ 0.053129] smp: Brought up 1 node, 4 CPUs [ 0.053129] smpboot: Max logical packages: 2 [ 0.053129] smpboot: Total of 4 processors activated (18357.77 BogoMIPS) [ 0.056401] devtmpfs: initialized [ 0.056401] x86/mm: Memory block size: 128MB [ 0.057160] evm: security.selinux [ 0.057162] evm: security.SMACK64 [ 0.057163] evm: security.SMACK64EXEC [ 0.057165] evm: security.SMACK64TRANSMUTE [ 0.057166] evm: security.SMACK64MMAP [ 0.057168] evm: security.apparmor [ 0.057169] evm: security.ima [ 0.057171] evm: security.capability [ 0.057212] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes) [ 0.057212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.057212] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.057212] pinctrl core: initialized pinctrl subsystem [ 0.057212] RTC time: 20:47:23, date: 12/26/18 [ 0.057212] NET: Registered protocol family 16 [ 0.057212] audit: initializing netlink subsys (disabled) [ 0.057212] audit: type=2000 audit(1545857243.056:1): state=initialized audit_enabled=0 res=1 [ 0.057212] cpuidle: using governor ladder [ 0.057212] cpuidle: using governor menu [ 0.057212] Detected 1 PCC Subspaces [ 0.057212] Registering PCC driver as Mailbox controller [ 0.057212] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.057212] ACPI: bus type PCI registered [ 0.057212] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.060031] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.060046] PCI: not using MMCONFIG [ 0.060046] PCI: Using configuration type 1 for base access [ 0.063363] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.063363] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064211] ACPI: Added _OSI(Module Device) [ 0.064215] ACPI: Added _OSI(Processor Device) [ 0.064217] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064219] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064222] ACPI: Added _OSI(Linux-Dell-Video) [ 0.064225] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.064231] ACPI: EC: EC started [ 0.064232] ACPI: EC: interrupt blocked [ 0.068201] ACPI: \: Used as first EC [ 0.068207] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.068210] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.081886] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.103157] ACPI Error: Needed type [Reference], found [Integer] (ptrval) (20170831/exresop-103) [ 0.103179] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170831/dswexec-461) [ 0.103198] No Local Variables are initialized for Method [_PDC] [ 0.103203] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation) [ 0.103205] Arg0: (ptrval) Buffer(12) 01 00 00 00 01 00 00 00 [ 0.103230] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 0.104530] ACPI: Dynamic OEM Table Load: [ 0.104556] ACPI: SSDT 0xFFFF8F29A82C5000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.106533] ACPI: Dynamic OEM Table Load: [ 0.106554] ACPI: SSDT 0xFFFF8F29A8362800 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.109948] ACPI: Interpreter enabled [ 0.110043] ACPI: (supports S0 S3 S4 S5) [ 0.110046] ACPI: Using IOAPIC for interrupt routing [ 0.110134] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.111772] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.111794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.112649] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.122601] ACPI: Power Resource [PUBS] (on) [ 0.123598] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.124749] ACPI: Power Resource [NVP3] (on) [ 0.124840] ACPI: Power Resource [NVP2] (on) [ 0.136541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.136789] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.137031] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.137271] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.137510] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.137749] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.137988] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.138227] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.138538] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.138551] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.139057] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.139283] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.139289] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.139294] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.139298] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.139861] PCI host bridge to bus 0000:00 [ 0.139868] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.139872] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.139876] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.139880] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.139884] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.139888] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.139892] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.139896] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.139899] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.139903] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.139907] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.139912] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.139915] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.139920] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.139943] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.140186] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.140219] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.140236] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.140249] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.140285] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.140482] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.140510] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit] [ 0.140778] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.140815] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit] [ 0.140919] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.141099] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.141138] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit] [ 0.141251] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.141422] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.141454] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff] [ 0.141468] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff] [ 0.141483] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.141581] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.141753] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.141788] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit] [ 0.141891] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.142058] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400 [ 0.142185] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.142550] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400 [ 0.142685] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.143047] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.143084] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff] [ 0.143221] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.143400] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.143733] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.143764] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.143777] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.143791] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.143805] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.143818] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.143832] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff] [ 0.143899] pci 0000:00:1f.2: PME# supported from D3hot [ 0.144075] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.144108] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit] [ 0.144142] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.144347] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.144397] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit] [ 0.144812] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.144911] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff] [ 0.145438] pci 0000:02:00.0: supports D1 D2 [ 0.145442] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.156063] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.156073] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff] [ 0.156427] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000 [ 0.156643] pci 0000:03:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit] [ 0.157420] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.168283] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.168293] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff] [ 0.171328] ACPI: EC: interrupt unblocked [ 0.171340] ACPI: EC: event unblocked [ 0.171352] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.171356] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.171896] SCSI subsystem initialized [ 0.171933] libata version 3.00 loaded. [ 0.172026] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.172032] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.172036] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.172037] vgaarb: loaded [ 0.172093] ACPI: bus type USB registered [ 0.172134] usbcore: registered new interface driver usbfs [ 0.172151] usbcore: registered new interface driver hub [ 0.172201] usbcore: registered new device driver usb [ 0.172297] EDAC MC: Ver: 3.0.0 [ 0.172320] Registered efivars operations [ 0.276232] PCI: Using ACPI for IRQ routing [ 0.278347] PCI: pci_cache_line_size set to 64 bytes [ 0.278703] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.278706] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.278709] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.278712] e820: reserve RAM buffer [mem 0xca7ce000-0xcbffffff] [ 0.278715] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff] [ 0.278718] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff] [ 0.278944] NetLabel: Initializing [ 0.278947] NetLabel: domain hash size = 128 [ 0.278948] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.278988] NetLabel: unlabeled traffic allowed by default [ 0.280203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.280220] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.282263] clocksource: Switched to clocksource hpet [ 0.306609] VFS: Disk quotas dquot_6.6.0 [ 0.306657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.306912] AppArmor: AppArmor Filesystem Enabled [ 0.306974] pnp: PnP ACPI init [ 0.308458] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.308466] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved [ 0.308470] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved [ 0.308475] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved [ 0.308479] system 00:00: [mem 0x000ec000-0x000effff] has been reserved [ 0.308484] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.308489] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.308494] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.308500] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.308514] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.308846] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.308893] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.308899] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.308903] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.308908] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.308913] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.308917] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.308922] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.308926] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.308931] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.308936] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.308940] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.308945] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.308952] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.308958] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.308962] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.308967] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.308972] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.308977] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.308989] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.309185] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.309244] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.309300] pnp 00:04: Plug and Play ACPI device, IDs LEN200e PNP0f13 (active) [ 0.310052] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.310612] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved [ 0.310617] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved [ 0.310629] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.310750] pnp: PnP ACPI: found 7 devices [ 0.319012] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.319053] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.319064] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff] [ 0.319078] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.319086] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff] [ 0.319103] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.319108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.319112] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.319116] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.319120] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.319124] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.319128] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.319132] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.319136] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.319140] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.319144] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.319149] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfebfffff window] [ 0.319153] pci_bus 0000:00: resource 16 [mem 0xfed40000-0xfed4bfff window] [ 0.319157] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff] [ 0.319162] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.319459] NET: Registered protocol family 2 [ 0.319869] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.320034] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.320165] TCP: Hash tables configured (established 32768 bind 32768) [ 0.320255] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.320288] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.320404] NET: Registered protocol family 1 [ 0.320433] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.321452] PCI: CLS 64 bytes, default 64 [ 0.321538] Unpacking initramfs... [ 2.738632] Freeing initrd memory: 57156K [ 2.738736] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.738744] software IO TLB [mem 0xbb59f000-0xbf59f000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 2.739281] Scanning for low memory corruption every 60 seconds [ 2.741035] Initialise system trusted keyrings [ 2.741053] Key type blacklist registered [ 2.741115] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 2.744158] zbud: loaded [ 2.745503] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.745830] fuse init (API version 7.26) [ 2.749094] Key type asymmetric registered [ 2.749096] Asymmetric key parser 'x509' registered [ 2.749192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.749274] io scheduler noop registered [ 2.749276] io scheduler deadline registered [ 2.749344] io scheduler cfq registered (default) [ 2.750386] efifb: probing for efifb [ 2.750411] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k [ 2.750415] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 2.750416] efifb: scrolling: redraw [ 2.750421] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.756722] Console: switching to colour frame buffer device 170x48 [ 2.762705] fb0: EFI VGA frame buffer device [ 2.762734] intel_idle: MWAIT substates: 0x11142120 [ 2.762737] intel_idle: v0.4.1 model 0x3D [ 2.763217] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.763590] ACPI: AC Adapter [AC] (off-line) [ 2.763734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.763784] ACPI: Lid Switch [LID] [ 2.763868] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.763909] ACPI: Sleep Button [SLPB] [ 2.764046] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.764085] ACPI: Power Button [PWRF] [ 2.766720] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.767809] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.767813] ACPI: Thermal Zone [THM0] (27 C) [ 2.768257] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.772814] Linux agpgart interface v0.103 [ 2.778400] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 2.778499] ACPI: Battery Slot [BAT0] (battery present) [ 2.782130] random: fast init done [ 2.788473] ACPI: Battery Slot [BAT1] (battery present) [ 2.832329] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 2.832411] tpm tpm0: TPM is disabled/deactivated (0x6) [ 2.840579] loop: module loaded [ 2.841002] libphy: Fixed MDIO Bus: probed [ 2.841005] tun: Universal TUN/TAP device driver, 1.6 [ 2.841243] PPP generic driver version 2.4.2 [ 2.841514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.841523] ehci-pci: EHCI PCI platform driver [ 2.841831] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.841847] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.841866] ehci-pci 0000:00:1d.0: debug port 2 [ 2.845802] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.845839] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000 [ 2.860108] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.860237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.860242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.860246] usb usb1: Product: EHCI Host Controller [ 2.860250] usb usb1: Manufacturer: Linux 4.15.0-43-generic ehci_hcd [ 2.860253] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.860681] hub 1-0:1.0: USB hub found [ 2.860696] hub 1-0:1.0: 3 ports detected [ 2.861524] ehci-platform: EHCI generic platform driver [ 2.861558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.861566] ohci-pci: OHCI PCI platform driver [ 2.861588] ohci-platform: OHCI generic platform driver [ 2.861604] uhci_hcd: USB Universal Host Controller Interface driver [ 2.861920] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.861932] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.863032] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 2.863041] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.863283] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.863287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.863291] usb usb2: Product: xHCI Host Controller [ 2.863295] usb usb2: Manufacturer: Linux 4.15.0-43-generic xhci-hcd [ 2.863299] usb usb2: SerialNumber: 0000:00:14.0 [ 2.863669] hub 2-0:1.0: USB hub found [ 2.863691] hub 2-0:1.0: 11 ports detected [ 2.866829] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.866838] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.866846] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.866919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.866924] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.866927] usb usb3: Product: xHCI Host Controller [ 2.866931] usb usb3: Manufacturer: Linux 4.15.0-43-generic xhci-hcd [ 2.866935] usb usb3: SerialNumber: 0000:00:14.0 [ 2.867306] hub 3-0:1.0: USB hub found [ 2.867323] hub 3-0:1.0: 4 ports detected [ 2.869035] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.870742] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.870752] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.871099] mousedev: PS/2 mouse device common for all mice [ 2.871551] rtc_cmos 00:02: RTC can wake from S4 [ 2.871796] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.871847] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.871873] i2c /dev entries driver [ 2.871884] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 2.872094] device-mapper: uevent: version 1.0.3 [ 2.872326] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.872343] intel_pstate: Intel P-state driver initializing [ 2.872644] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.872668] ledtrig-cpu: registered to indicate activity on CPUs [ 2.872671] EFI Variables Facility v0.08 2004-May-17 [ 2.921989] NET: Registered protocol family 10 [ 2.925386] Segment Routing with IPv6 [ 2.925404] NET: Registered protocol family 17 [ 2.925434] Key type dns_resolver registered [ 2.925651] RAS: Correctable Errors collector initialized. [ 2.925697] microcode: sig=0x306d4, pf=0x40, revision=0x2b [ 2.925740] microcode: Microcode Update Driver: v2.2. [ 2.925749] sched_clock: Marking stable (2925736235, 0)->(3031863584, -106127349) [ 2.925911] registered taskstats version 1 [ 2.925921] Loading compiled-in X.509 certificates [ 2.928182] Loaded X.509 cert 'Build time autogenerated kernel key: 6afcca3ddc80072aeae87585a7fdb65d40603f58' [ 2.928557] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 2.928574] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 2.928586] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring [ 2.928601] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring [ 2.928722] Couldn't get size: 0x800000000000000e [ 2.928752] MODSIGN: Couldn't get UEFI MokListRT [ 2.929196] zswap: loaded using pool lzo/zbud [ 2.932518] Key type big_key registered [ 2.932521] Key type trusted registered [ 2.934004] Key type encrypted registered [ 2.934007] AppArmor: AppArmor sha1 policy hashing enabled [ 2.944714] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 2.944745] ima: No TPM chip found, activating TPM-bypass! (rc=6) [ 2.944755] ima: Allocated hash algorithm: sha1 [ 2.944776] evm: HMAC attrs: 0x1 [ 2.945282] Magic number: 14:350:802 [ 2.945304] usb usb2-port11: hash matches [ 2.945408] rtc_cmos 00:02: setting system clock to 2018-12-26 20:47:26 UTC (1545857246) [ 2.945519] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.945519] EDD information not available. [ 2.947387] Freeing unused kernel memory: 2408K [ 2.972026] Write protecting the kernel read-only data: 20480k [ 2.972453] Freeing unused kernel memory: 2008K [ 2.975993] Freeing unused kernel memory: 1892K [ 2.981170] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.981170] x86/mm: Checking user space page tables [ 2.986234] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.998301] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.998386] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.998391] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.054231] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 3.054574] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 3.056789] pps_core: LinuxPPS API ver. 1 registered [ 3.056790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.058177] PTP clock support registered [ 3.063456] ahci 0000:00:1f.2: version 3.0 [ 3.063911] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.063912] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.073721] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x2 impl SATA mode [ 3.073724] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 3.074059] scsi host0: ahci [ 3.074135] scsi host1: ahci [ 3.074201] scsi host2: ahci [ 3.074228] ata1: DUMMY [ 3.074230] ata2: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c180 irq 44 [ 3.074231] ata3: DUMMY [ 3.074410] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.111044] AVX2 version of gcm_enc/dec engaged. [ 3.111045] AES CTR mode by8 optimization enabled [ 3.196060] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.204048] usb 2-6: new full-speed USB device number 2 using xhci_hcd [ 3.256455] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.319199] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:2f:b7:db [ 3.319200] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.319228] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 3.319383] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.319412] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.319953] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 3.320659] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 3.323015] [drm] Memory usable by graphics device = 4096M [ 3.323017] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 3.323018] fb: switching to inteldrmfb from EFI VGA [ 3.323036] Console: switching to colour dummy device 80x25 [ 3.323117] [drm] Replacing VGA console driver [ 3.329356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.329357] [drm] Driver supports precise vblank timestamp query. [ 3.329388] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 3.336189] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 3.337045] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.337512] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.352427] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 3.352429] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.352805] hub 1-1:1.0: USB hub found [ 3.352878] hub 1-1:1.0: 8 ports detected [ 3.354411] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 3.354413] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.354415] usb 2-6: SerialNumber: be07c9b822ac [ 3.386964] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.387248] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.387251] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.387317] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 3.387515] ata2.00: ATA-9: ADATA SP600NS34, 5.8f, max UDMA/133 [ 3.387517] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.387783] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.387786] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.387808] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 3.387912] ata2.00: configured for UDMA/133 [ 3.388109] scsi 1:0:0:0: Direct-Access ATA ADATA SP600NS34 5.8f PQ: 0 ANSI: 5 [ 3.388326] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.388437] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.388455] sd 1:0:0:0: [sda] Write Protect is off [ 3.388457] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.388481] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.389635] sda: sda1 sda2 sda3 [ 3.389970] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.480096] usb 2-7: new full-speed USB device number 3 using xhci_hcd [ 3.629286] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a [ 3.629288] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.744040] tsc: Refined TSC clocksource calibration: 2294.688 MHz [ 3.744049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139aef754, max_idle_ns: 440795211890 ns [ 3.756007] usb 2-8: new high-speed USB device number 4 using xhci_hcd [ 3.785531] fbcon: inteldrmfb (fb0) is primary device [ 3.862308] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 3.893181] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 3.893187] psmouse serio1: synaptics: Your touchpad (PNP: LEN200e PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 3.913814] usb 2-8: New USB device found, idVendor=5986, idProduct=0366 [ 3.913816] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.913817] usb 2-8: Product: Integrated Camera [ 3.913818] usb 2-8: Manufacturer: SunplusIT Inc [ 3.953290] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560 [ 3.953296] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.991904] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 4.621442] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 4.768140] clocksource: Switched to clocksource tsc [ 4.780946] Console: switching to colour frame buffer device 170x48 [ 4.799560] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.818002] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 16.769479] random: crng init done [ 16.769481] random: 7 urandom warning(s) missed due to ratelimiting [ 21.287202] NET: Registered protocol family 38 [ 21.552528] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 21.687282] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.765339] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 21.784473] systemd[1]: Detected architecture x86-64. [ 21.786965] systemd[1]: Set hostname to . [ 21.908139] systemd[1]: Reached target Libvirt guests shutdown. [ 21.908231] systemd[1]: Reached target User and Group Name Lookups. [ 21.908283] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 21.908425] systemd[1]: Created slice User and Session Slice. [ 21.908615] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 21.908725] systemd[1]: Created slice System Slice. [ 21.908816] systemd[1]: Listening on LVM2 metadata daemon socket. [ 21.935136] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 21.948232] lp: driver loaded but no devices found [ 21.956776] ppdev: user-space parallel port driver [ 21.961602] RPC: Registered named UNIX socket transport module. [ 21.961605] RPC: Registered udp transport module. [ 21.961605] RPC: Registered tcp transport module. [ 21.961606] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 22.021514] systemd-journald[439]: Received request to flush runtime journal from PID 1 [ 22.198943] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.249420] Non-volatile memory driver v1.3 [ 22.254770] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 22.254772] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 22.254773] thinkpad_acpi: ThinkPad BIOS JBET61WW (1.25 ), EC unknown [ 22.254774] thinkpad_acpi: Lenovo ThinkPad T450, model 20BV0064US [ 22.255809] thinkpad_acpi: radio switch found; radios are enabled [ 22.255823] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 22.255823] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 22.259385] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 22.272980] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 22.301853] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 22.307674] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 22.307677] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.307680] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 22.307682] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 22.307683] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 22.307685] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 22.307688] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 22.307689] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 22.316671] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 22.316737] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 22.316798] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 22.316855] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 22.316917] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 22.346866] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 22.347133] Bluetooth: Core ver 2.22 [ 22.347148] NET: Registered protocol family 31 [ 22.347149] Bluetooth: HCI device and connection manager initialized [ 22.347153] Bluetooth: HCI socket layer initialized [ 22.347155] Bluetooth: L2CAP socket layer initialized [ 22.347160] Bluetooth: SCO socket layer initialized [ 22.368898] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 22.368967] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 22.369014] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 22.369053] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 22.385652] usbcore: registered new interface driver btusb [ 22.398060] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.400474] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 22.403043] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 22.411523] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 22.411524] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 22.411525] RAPL PMU: hw unit of domain package 2^-14 Joules [ 22.411526] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 22.411527] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 22.425668] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.449796] Intel(R) Wireless WiFi driver for Linux [ 22.449798] Copyright(c) 2003- 2015 Intel Corporation [ 22.464181] media: Linux media interface: v0.10 [ 22.469774] iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm [ 22.481481] Linux video capture interface: v2.00 [ 22.510553] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 22.532341] iwlwifi 0000:03:00.0: base HW address: a4:02:b9:6d:3b:de [ 22.542468] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366) [ 22.549765] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized! [ 22.549768] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized! [ 22.549770] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized! [ 22.549773] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized! [ 22.549911] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18 [ 22.550002] usbcore: registered new interface driver uvcvideo [ 22.550003] USB Video Class driver (1.1.1) [ 22.553130] intel_rapl: Found RAPL domain package [ 22.553132] intel_rapl: Found RAPL domain core [ 22.553133] intel_rapl: Found RAPL domain uncore [ 22.553134] intel_rapl: Found RAPL domain dram [ 22.618999] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 22.619295] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 22.619316] thermal thermal_zone3: failed to read out thermal zone (-61) [ 22.674750] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 22.686469] Bluetooth: hci0: Intel firmware patch completed and activated [ 23.377488] Adding 8388604k swap on /dev/mapper/kubuntu--vg-swap_1. Priority:-2 extents:1 across:8388604k SSFS [ 23.527843] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 23.529992] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 23.630727] audit: type=1400 audit(1545857267.178:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=844 comm="apparmor_parser" [ 23.630732] audit: type=1400 audit(1545857267.178:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=844 comm="apparmor_parser" [ 23.630735] audit: type=1400 audit(1545857267.178:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=844 comm="apparmor_parser" [ 23.631443] audit: type=1400 audit(1545857267.178:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine" pid=841 comm="apparmor_parser" [ 23.631447] audit: type=1400 audit(1545857267.178:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=841 comm="apparmor_parser" [ 23.633904] audit: type=1400 audit(1545857267.182:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=840 comm="apparmor_parser" [ 23.633910] audit: type=1400 audit(1545857267.182:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=840 comm="apparmor_parser" [ 23.633912] audit: type=1400 audit(1545857267.182:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=840 comm="apparmor_parser" [ 23.633914] audit: type=1400 audit(1545857267.182:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=840 comm="apparmor_parser" [ 23.634804] audit: type=1400 audit(1545857267.182:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=846 comm="apparmor_parser" [ 23.866608] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.866610] Bluetooth: BNEP filters: protocol multicast [ 23.866613] Bluetooth: BNEP socket layer initialized [ 24.770305] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 24.923107] Ebtables v2.0 registered [ 25.000246] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 25.272162] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 25.279666] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 25.383910] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 25.515691] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 25.620673] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 26.037135] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 26.186665] Netfilter messages via NETLINK v0.30. [ 26.190970] ip_set: protocol 6 [ 27.227233] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/l1tf.html for details. [ 28.141047] virbr0: port 1(virbr0-nic) entered blocking state [ 28.141049] virbr0: port 1(virbr0-nic) entered disabled state [ 28.141437] device virbr0-nic entered promiscuous mode [ 28.246391] virbr0: port 1(virbr0-nic) entered blocking state [ 28.246394] virbr0: port 1(virbr0-nic) entered listening state [ 28.282607] virbr0: port 1(virbr0-nic) entered disabled state [ 30.178681] wlp3s0: authenticate with 18:0f:76:9f:c6:6f [ 30.183580] wlp3s0: send auth to 18:0f:76:9f:c6:6f (try 1/3) [ 30.188690] wlp3s0: authenticated [ 30.192020] wlp3s0: associate with 18:0f:76:9f:c6:6f (try 1/3) [ 30.195866] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6f (capab=0x411 status=0 aid=3) [ 30.204519] wlp3s0: associated [ 30.228742] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 31.515613] NET: Registered protocol family 15 [ 31.566216] Initializing XFRM netlink socket [ 35.873948] Bluetooth: RFCOMM TTY layer initialized [ 35.873967] Bluetooth: RFCOMM socket layer initialized [ 35.873972] Bluetooth: RFCOMM ver 1.11 [ 36.412455] kauditd_printk_skb: 29 callbacks suppressed [ 36.412458] audit: type=1400 audit(1545857279.962:41): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2378 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 36.445019] audit: type=1400 audit(1545857279.994:42): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=2378 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 36.474340] audit: type=1400 audit(1545857280.022:43): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2384 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 65.328742] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6f by local choice (Reason: 3=DEAUTH_LEAVING) [ 67.467954] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [ 67.473977] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [ 67.477640] wlp3s0: authenticated [ 67.480018] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [ 67.481449] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [ 67.483099] wlp3s0: associated [ 67.584239] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [ 4810.193696] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 5858.778122] perf: interrupt took too long (3171 > 3136), lowering kernel.perf_event_max_sample_rate to 63000 [ 7641.051540] FS-Cache: Loaded [ 7641.074112] FS-Cache: Netfs 'nfs' registered for caching [ 7641.090565] NFS: Registering the id_resolver key type [ 7641.090583] Key type id_resolver registered [ 7641.090584] Key type id_legacy registered [ 8175.558843] perf: interrupt took too long (3979 > 3963), lowering kernel.perf_event_max_sample_rate to 50250 [ 9407.626817] thinkpad_acpi: EC reports that Thermal Table has changed [13514.994278] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [13516.270132] PM: suspend entry (deep) [13516.270135] PM: Syncing filesystems ... done. [13516.330984] Freezing user space processes ... (elapsed 0.002 seconds) done. [13516.333258] OOM killer disabled. [13516.333259] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [13516.334589] Suspending console(s) (use no_console_suspend to debug) [13516.479386] sd 1:0:0:0: [sda] Synchronizing SCSI cache [13516.485249] sd 1:0:0:0: [sda] Stopping disk [13516.671530] e1000e: EEE TX LPI TIMER: 00000011 [13517.027508] ACPI: EC: interrupt blocked [13517.067794] ACPI: Preparing to enter system sleep state S3 [13517.072699] ACPI: EC: event blocked [13517.072700] ACPI: EC: EC stopped [13517.072701] PM: Saving platform NVS memory [13517.072721] Disabling non-boot CPUs ... [13517.087713] IRQ 50: no longer affine to CPU1 [13517.089509] smpboot: CPU 1 is now offline [13517.107809] IRQ 46: no longer affine to CPU2 [13517.108833] smpboot: CPU 2 is now offline [13517.131712] IRQ 23: no longer affine to CPU3 [13517.132735] smpboot: CPU 3 is now offline [13517.134688] ACPI: Low-level resume complete [13517.134752] ACPI: EC: EC started [13517.134752] PM: Restoring platform NVS memory [13517.137088] Enabling non-boot CPUs ... [13517.137173] x86: Booting SMP configuration: [13517.137174] smpboot: Booting Node 0 Processor 1 APIC 0x1 [13517.137683] cache: parent cpu1 should not be sleeping [13517.137830] CPU1 is up [13517.137864] smpboot: Booting Node 0 Processor 2 APIC 0x2 [13517.139351] cache: parent cpu2 should not be sleeping [13517.139520] CPU2 is up [13517.139542] smpboot: Booting Node 0 Processor 3 APIC 0x3 [13517.140025] cache: parent cpu3 should not be sleeping [13517.140294] CPU3 is up [13517.145647] ACPI: Waking up from system sleep state S3 [13517.150108] thinkpad_acpi: EC reports that Thermal Table has changed [13517.152968] ACPI: EC: interrupt unblocked [13517.203691] ACPI: EC: event unblocked [13517.213639] sd 1:0:0:0: [sda] Starting disk [13517.231263] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [13517.231267] tpm tpm0: TPM is disabled/deactivated (0x6) [13517.449396] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [13517.528636] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [13517.529040] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [13517.529045] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [13517.529116] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [13517.529775] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [13517.529780] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [13517.529803] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [13517.529918] ata2.00: configured for UDMA/133 [13517.725441] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [13517.937504] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [13517.968021] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [13518.001372] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [13518.156255] acpi LNXPOWER:02: Turning OFF [13518.156499] OOM killer enabled. [13518.156500] Restarting tasks ... done. [13518.164558] thermal thermal_zone3: failed to read out thermal zone (-61) [13518.171901] Bluetooth: hci0: read Intel version: 370810011003110e00 [13518.171908] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [13518.201201] PM: suspend exit [13518.468703] e1000e: enp0s25 NIC Link is Down [13518.471477] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [13518.477886] Bluetooth: hci0: Intel firmware patch completed and activated [13518.661704] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [13518.663510] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [13518.773487] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [13518.866393] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [13523.462920] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [13523.467772] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [13523.472273] wlp3s0: authenticated [13523.473203] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [13523.474308] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [13523.477526] wlp3s0: associated [13523.484678] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [13523.525192] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [14741.777759] perf: interrupt took too long (4978 > 4973), lowering kernel.perf_event_max_sample_rate to 40000 [15033.598092] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [15034.078962] PM: suspend entry (deep) [15034.078966] PM: Syncing filesystems ... done. [15034.158672] Freezing user space processes ... (elapsed 0.002 seconds) done. [15034.160696] OOM killer disabled. [15034.160697] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [15034.162028] Suspending console(s) (use no_console_suspend to debug) [15034.300583] sd 1:0:0:0: [sda] Synchronizing SCSI cache [15034.301958] sd 1:0:0:0: [sda] Stopping disk [15034.490437] e1000e: EEE TX LPI TIMER: 00000011 [15035.117278] ACPI: EC: interrupt blocked [15035.157231] ACPI: Preparing to enter system sleep state S3 [15035.162585] ACPI: EC: event blocked [15035.162586] ACPI: EC: EC stopped [15035.162587] PM: Saving platform NVS memory [15035.162611] Disabling non-boot CPUs ... [15035.177148] IRQ 50: no longer affine to CPU1 [15035.178935] smpboot: CPU 1 is now offline [15035.197180] IRQ 46: no longer affine to CPU2 [15035.198197] smpboot: CPU 2 is now offline [15035.221062] IRQ 23: no longer affine to CPU3 [15035.221069] IRQ 42: no longer affine to CPU3 [15035.222089] smpboot: CPU 3 is now offline [15035.224010] ACPI: Low-level resume complete [15035.224074] ACPI: EC: EC started [15035.224074] PM: Restoring platform NVS memory [15035.226419] Enabling non-boot CPUs ... [15035.226492] x86: Booting SMP configuration: [15035.226493] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15035.227000] cache: parent cpu1 should not be sleeping [15035.227148] CPU1 is up [15035.227177] smpboot: Booting Node 0 Processor 2 APIC 0x2 [15035.228766] cache: parent cpu2 should not be sleeping [15035.228930] CPU2 is up [15035.228959] smpboot: Booting Node 0 Processor 3 APIC 0x3 [15035.229441] cache: parent cpu3 should not be sleeping [15035.229852] CPU3 is up [15035.238868] ACPI: Waking up from system sleep state S3 [15035.244941] ACPI: EC: interrupt unblocked [15035.297449] sd 1:0:0:0: [sda] Starting disk [15035.297565] ACPI: EC: event unblocked [15035.324612] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [15035.324616] tpm tpm0: TPM is disabled/deactivated (0x6) [15035.542702] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [15035.609621] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [15035.609964] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [15035.609968] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [15035.609998] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [15035.610557] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [15035.610562] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [15035.610587] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [15035.610707] ata2.00: configured for UDMA/133 [15035.818633] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [15036.031594] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [15036.062506] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [15036.094887] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [15036.245507] acpi LNXPOWER:02: Turning OFF [15036.245887] OOM killer enabled. [15036.245889] Restarting tasks ... done. [15036.258365] thermal thermal_zone3: failed to read out thermal zone (-61) [15036.260355] Bluetooth: hci0: read Intel version: 370810011003110e00 [15036.288900] PM: suspend exit [15036.326969] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [15036.497843] e1000e: enp0s25 NIC Link is Down [15036.502149] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [15036.663463] Bluetooth: hci0: Intel firmware patch completed and activated [15036.686688] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [15036.687944] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [15036.791011] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [15036.881719] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [15041.556700] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [15041.561321] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [15041.565579] wlp3s0: authenticated [15041.571247] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [15041.572497] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [15041.584320] wlp3s0: associated [15041.599516] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [15041.612035] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [17349.925378] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [17350.201066] PM: suspend entry (deep) [17350.201069] PM: Syncing filesystems ... done. [17350.223169] Freezing user space processes ... (elapsed 0.002 seconds) done. [17350.225478] OOM killer disabled. [17350.225479] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [17350.226531] Suspending console(s) (use no_console_suspend to debug) [17350.366566] sd 1:0:0:0: [sda] Synchronizing SCSI cache [17350.367998] sd 1:0:0:0: [sda] Stopping disk [17350.561310] e1000e: EEE TX LPI TIMER: 00000011 [17351.295616] ACPI: EC: interrupt blocked [17351.335131] ACPI: Preparing to enter system sleep state S3 [17351.340871] ACPI: EC: event blocked [17351.340872] ACPI: EC: EC stopped [17351.340874] PM: Saving platform NVS memory [17351.340900] Disabling non-boot CPUs ... [17351.356769] smpboot: CPU 1 is now offline [17351.374981] IRQ 46: no longer affine to CPU2 [17351.376006] smpboot: CPU 2 is now offline [17351.398872] IRQ 23: no longer affine to CPU3 [17351.398884] IRQ 50: no longer affine to CPU3 [17351.399896] smpboot: CPU 3 is now offline [17351.401810] ACPI: Low-level resume complete [17351.401873] ACPI: EC: EC started [17351.401874] PM: Restoring platform NVS memory [17351.404210] Enabling non-boot CPUs ... [17351.404255] x86: Booting SMP configuration: [17351.404256] smpboot: Booting Node 0 Processor 1 APIC 0x1 [17351.404761] cache: parent cpu1 should not be sleeping [17351.404911] CPU1 is up [17351.404940] smpboot: Booting Node 0 Processor 2 APIC 0x2 [17351.406523] cache: parent cpu2 should not be sleeping [17351.406690] CPU2 is up [17351.406738] smpboot: Booting Node 0 Processor 3 APIC 0x3 [17351.407204] cache: parent cpu3 should not be sleeping [17351.407374] CPU3 is up [17351.410351] ACPI: Waking up from system sleep state S3 [17351.416250] ACPI: EC: interrupt unblocked [17351.469312] ACPI: EC: event unblocked [17351.470109] sd 1:0:0:0: [sda] Starting disk [17351.502597] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [17351.502602] tpm tpm0: TPM is disabled/deactivated (0x6) [17351.716519] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [17351.783481] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [17351.783730] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [17351.783732] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [17351.783752] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [17351.784056] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [17351.784058] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [17351.784078] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [17351.784179] ata2.00: configured for UDMA/133 [17351.992578] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [17352.214352] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [17352.245360] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [17352.268576] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [17352.418150] acpi LNXPOWER:02: Turning OFF [17352.418363] OOM killer enabled. [17352.418380] Restarting tasks ... done. [17352.426537] thermal thermal_zone3: failed to read out thermal zone (-61) [17352.433087] Bluetooth: hci0: read Intel version: 370810011003110e00 [17352.433093] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [17352.451725] PM: suspend exit [17352.683665] e1000e: enp0s25 NIC Link is Down [17352.696571] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [17352.748076] Bluetooth: hci0: Intel firmware patch completed and activated [17352.884464] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [17352.885673] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [17352.995463] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [17353.101413] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [17357.843019] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [17357.849182] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [17357.852968] wlp3s0: authenticated [17357.860329] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [17357.861458] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [17357.863413] wlp3s0: associated [17357.872743] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [17357.922683] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [24524.529134] thinkpad_acpi: EC reports that Thermal Table has changed [24538.523652] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [24538.939265] PM: suspend entry (deep) [24538.939268] PM: Syncing filesystems ... done. [24538.973392] Freezing user space processes ... (elapsed 0.009 seconds) done. [24538.982408] OOM killer disabled. [24538.982408] Freezing remaining freezable tasks ... (elapsed 0.014 seconds) done. [24538.996540] Suspending console(s) (use no_console_suspend to debug) [24539.131797] sd 1:0:0:0: [sda] Synchronizing SCSI cache [24539.153422] sd 1:0:0:0: [sda] Stopping disk [24539.335043] e1000e: EEE TX LPI TIMER: 00000011 [24540.100270] ACPI: EC: interrupt blocked [24540.140453] ACPI: Preparing to enter system sleep state S3 [24540.146006] ACPI: EC: event blocked [24540.146008] ACPI: EC: EC stopped [24540.146009] PM: Saving platform NVS memory [24540.146034] Disabling non-boot CPUs ... [24540.161439] smpboot: CPU 1 is now offline [24540.180389] IRQ 46: no longer affine to CPU2 [24540.181413] smpboot: CPU 2 is now offline [24540.204270] IRQ 23: no longer affine to CPU3 [24540.204283] IRQ 50: no longer affine to CPU3 [24540.205295] smpboot: CPU 3 is now offline [24540.207195] ACPI: Low-level resume complete [24540.207259] ACPI: EC: EC started [24540.207259] PM: Restoring platform NVS memory [24540.209578] Enabling non-boot CPUs ... [24540.209623] x86: Booting SMP configuration: [24540.209624] smpboot: Booting Node 0 Processor 1 APIC 0x1 [24540.210131] cache: parent cpu1 should not be sleeping [24540.210277] CPU1 is up [24540.210330] smpboot: Booting Node 0 Processor 2 APIC 0x2 [24540.211914] cache: parent cpu2 should not be sleeping [24540.212079] CPU2 is up [24540.212109] smpboot: Booting Node 0 Processor 3 APIC 0x3 [24540.212572] cache: parent cpu3 should not be sleeping [24540.212985] CPU3 is up [24540.221987] ACPI: Waking up from system sleep state S3 [24540.228146] ACPI: EC: interrupt unblocked [24540.279117] ACPI: EC: event unblocked [24540.279688] sd 1:0:0:0: [sda] Starting disk [24540.307023] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [24540.307028] tpm tpm0: TPM is disabled/deactivated (0x6) [24540.525857] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [24540.592867] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [24540.593244] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24540.593249] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24540.593273] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [24540.593810] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24540.593815] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24540.593848] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [24540.594011] ata2.00: configured for UDMA/133 [24540.802103] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [24541.049046] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [24541.078041] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [24541.080289] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [24541.233220] acpi LNXPOWER:02: Turning OFF [24541.233592] OOM killer enabled. [24541.233594] Restarting tasks ... [24541.250602] Bluetooth: hci0: read Intel version: 370810011003110e00 [24541.255646] done. [24541.258634] thermal thermal_zone3: failed to read out thermal zone (-61) [24541.282973] PM: suspend exit [24541.318876] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [24541.556120] e1000e: enp0s25 NIC Link is Down [24541.568959] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [24541.615777] Bluetooth: hci0: Intel firmware patch completed and activated [24541.759523] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [24541.769665] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [24541.885935] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [24541.986544] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [24546.675281] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [24546.680145] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [24546.683272] wlp3s0: authenticated [24546.685711] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [24546.686836] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [24546.689265] wlp3s0: associated [24546.697271] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [24546.770774] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [26434.999526] thinkpad_acpi: EC reports that Thermal Table has changed [27527.648424] thinkpad_acpi: EC reports that Thermal Table has changed [27702.242989] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [27702.542099] PM: suspend entry (deep) [27702.542102] PM: Syncing filesystems ... done. [27702.570569] Freezing user space processes ... (elapsed 0.002 seconds) done. [27702.572857] OOM killer disabled. [27702.572858] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [27702.574226] Suspending console(s) (use no_console_suspend to debug) [27702.713245] sd 1:0:0:0: [sda] Synchronizing SCSI cache [27702.716293] sd 1:0:0:0: [sda] Stopping disk [27702.906994] e1000e: EEE TX LPI TIMER: 00000011 [27703.573444] ACPI: EC: interrupt blocked [27703.613730] ACPI: Preparing to enter system sleep state S3 [27703.618723] ACPI: EC: event blocked [27703.618724] ACPI: EC: EC stopped [27703.618725] PM: Saving platform NVS memory [27703.618749] Disabling non-boot CPUs ... [27703.634721] smpboot: CPU 1 is now offline [27703.657743] IRQ 46: no longer affine to CPU2 [27703.658768] smpboot: CPU 2 is now offline [27703.681617] IRQ 23: no longer affine to CPU3 [27703.681630] IRQ 50: no longer affine to CPU3 [27703.682653] smpboot: CPU 3 is now offline [27703.684627] ACPI: Low-level resume complete [27703.684689] ACPI: EC: EC started [27703.684690] PM: Restoring platform NVS memory [27703.687069] Enabling non-boot CPUs ... [27703.687112] x86: Booting SMP configuration: [27703.687113] smpboot: Booting Node 0 Processor 1 APIC 0x1 [27703.687622] cache: parent cpu1 should not be sleeping [27703.687768] CPU1 is up [27703.687809] smpboot: Booting Node 0 Processor 2 APIC 0x2 [27703.689395] cache: parent cpu2 should not be sleeping [27703.689561] CPU2 is up [27703.689586] smpboot: Booting Node 0 Processor 3 APIC 0x3 [27703.689969] cache: parent cpu3 should not be sleeping [27703.690381] CPU3 is up [27703.699388] ACPI: Waking up from system sleep state S3 [27703.705258] ACPI: EC: interrupt unblocked [27703.757712] ACPI: EC: event unblocked [27703.758657] sd 1:0:0:0: [sda] Starting disk [27703.780212] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [27703.780216] tpm tpm0: TPM is disabled/deactivated (0x6) [27704.003178] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [27704.074002] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [27704.074503] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27704.074510] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27704.074541] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27704.075159] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27704.075165] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27704.075195] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27704.075331] ata2.00: configured for UDMA/133 [27704.279302] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [27704.495617] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [27704.527108] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [27704.555269] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [27704.710978] acpi LNXPOWER:02: Turning OFF [27704.711359] OOM killer enabled. [27704.711362] Restarting tasks ... [27704.725822] Bluetooth: hci0: read Intel version: 370810011003110e00 [27704.725827] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [27704.734015] done. [27704.735325] thermal thermal_zone3: failed to read out thermal zone (-61) [27704.758881] PM: suspend exit [27704.975965] e1000e: enp0s25 NIC Link is Down [27704.977947] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [27705.044817] Bluetooth: hci0: Intel firmware patch completed and activated [27705.163696] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [27705.167276] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [27705.283489] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [27705.382836] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [27710.095794] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [27710.100865] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [27710.115566] wlp3s0: authenticated [27710.118704] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [27710.119875] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [27710.122193] wlp3s0: associated [27710.129805] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [27710.202036] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [28596.203012] usb 2-2: new low-speed USB device number 5 using xhci_hcd [28596.354343] usb 2-2: New USB device found, idVendor=093a, idProduct=2510 [28596.354348] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [28596.354352] usb 2-2: Product: USB Optical Mouse [28596.354355] usb 2-2: Manufacturer: PixArt [28596.388515] hidraw: raw HID events driver (C) Jiri Kosina [28596.393456] usbcore: registered new interface driver usbhid [28596.393459] usbhid: USB HID core driver [28596.406141] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:093A:2510.0001/input/input19 [28596.406520] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0 [29511.821562] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [29513.386018] PM: suspend entry (deep) [29513.386020] PM: Syncing filesystems ... done. [29513.504359] Freezing user space processes ... (elapsed 0.009 seconds) done. [29513.513388] OOM killer disabled. [29513.513389] Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. [29513.521143] Suspending console(s) (use no_console_suspend to debug) [29513.658008] sd 1:0:0:0: [sda] Synchronizing SCSI cache [29513.680845] sd 1:0:0:0: [sda] Stopping disk [29513.864744] e1000e: EEE TX LPI TIMER: 00000011 [29514.270359] ACPI: EC: interrupt blocked [29514.310471] ACPI: Preparing to enter system sleep state S3 [29514.315932] ACPI: EC: event blocked [29514.315933] ACPI: EC: EC stopped [29514.315934] PM: Saving platform NVS memory [29514.315960] Disabling non-boot CPUs ... [29514.331459] smpboot: CPU 1 is now offline [29514.350412] IRQ 46: no longer affine to CPU2 [29514.351437] smpboot: CPU 2 is now offline [29514.374291] IRQ 23: no longer affine to CPU3 [29514.374303] IRQ 50: no longer affine to CPU3 [29514.375315] smpboot: CPU 3 is now offline [29514.377235] ACPI: Low-level resume complete [29514.377298] ACPI: EC: EC started [29514.377299] PM: Restoring platform NVS memory [29514.379605] Enabling non-boot CPUs ... [29514.379651] x86: Booting SMP configuration: [29514.379652] smpboot: Booting Node 0 Processor 1 APIC 0x1 [29514.380044] cache: parent cpu1 should not be sleeping [29514.380191] CPU1 is up [29514.380245] smpboot: Booting Node 0 Processor 2 APIC 0x2 [29514.381825] cache: parent cpu2 should not be sleeping [29514.381991] CPU2 is up [29514.382019] smpboot: Booting Node 0 Processor 3 APIC 0x3 [29514.382503] cache: parent cpu3 should not be sleeping [29514.382850] CPU3 is up [29514.390163] ACPI: Waking up from system sleep state S3 [29514.396097] ACPI: EC: interrupt unblocked [29514.448651] ACPI: EC: event unblocked [29514.449623] sd 1:0:0:0: [sda] Starting disk [29514.476645] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [29514.476650] tpm tpm0: TPM is disabled/deactivated (0x6) [29514.740027] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [29514.762644] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [29514.762895] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [29514.762898] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [29514.762920] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [29514.763285] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [29514.763288] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [29514.763309] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [29514.763415] ata2.00: configured for UDMA/133 [29515.015958] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [29515.189370] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [29515.220446] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [29515.292121] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [29515.442907] acpi LNXPOWER:02: Turning OFF [29515.443241] OOM killer enabled. [29515.443243] Restarting tasks ... [29515.457463] Bluetooth: hci0: read Intel version: 370810011003110e00 [29515.457906] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [29515.466645] done. [29515.467645] thermal thermal_zone3: failed to read out thermal zone (-61) [29515.489564] PM: suspend exit [29515.741677] e1000e: enp0s25 NIC Link is Down [29515.749234] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [29515.787466] Bluetooth: hci0: Intel firmware patch completed and activated [29515.940034] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [29515.941890] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [29516.055233] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [29516.164556] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [29520.914621] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [29520.920191] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [29520.921772] wlp3s0: authenticated [29520.923881] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [29520.925068] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=3) [29520.935657] wlp3s0: associated [29520.943626] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [29521.019620] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [33822.491767] perf: interrupt took too long (6231 > 6222), lowering kernel.perf_event_max_sample_rate to 32000 [35462.754175] usb 2-2: USB disconnect, device number 5 [35523.212690] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [35523.674065] PM: suspend entry (deep) [35523.674067] PM: Syncing filesystems ... done. [35523.709421] Freezing user space processes ... (elapsed 0.002 seconds) done. [35523.711814] OOM killer disabled. [35523.711814] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35523.713179] Suspending console(s) (use no_console_suspend to debug) [35523.850812] sd 1:0:0:0: [sda] Synchronizing SCSI cache [35523.853446] sd 1:0:0:0: [sda] Stopping disk [35524.047588] e1000e: EEE TX LPI TIMER: 00000011 [35524.303293] ACPI: EC: interrupt blocked [35524.343436] ACPI: Preparing to enter system sleep state S3 [35524.348771] ACPI: EC: event blocked [35524.348772] ACPI: EC: EC stopped [35524.348774] PM: Saving platform NVS memory [35524.348797] Disabling non-boot CPUs ... [35524.365013] smpboot: CPU 1 is now offline [35524.383384] IRQ 46: no longer affine to CPU2 [35524.384402] smpboot: CPU 2 is now offline [35524.407271] IRQ 23: no longer affine to CPU3 [35524.407284] IRQ 50: no longer affine to CPU3 [35524.408295] smpboot: CPU 3 is now offline [35524.410192] ACPI: Low-level resume complete [35524.410256] ACPI: EC: EC started [35524.410256] PM: Restoring platform NVS memory [35524.412576] Enabling non-boot CPUs ... [35524.412621] x86: Booting SMP configuration: [35524.412622] smpboot: Booting Node 0 Processor 1 APIC 0x1 [35524.413013] cache: parent cpu1 should not be sleeping [35524.413160] CPU1 is up [35524.413206] smpboot: Booting Node 0 Processor 2 APIC 0x2 [35524.414692] cache: parent cpu2 should not be sleeping [35524.414859] CPU2 is up [35524.414887] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35524.415371] cache: parent cpu3 should not be sleeping [35524.415784] CPU3 is up [35524.424803] ACPI: Waking up from system sleep state S3 [35524.428463] thinkpad_acpi: EC reports that Thermal Table has changed [35524.431383] ACPI: EC: interrupt unblocked [35524.485831] ACPI: EC: event unblocked [35524.486628] sd 1:0:0:0: [sda] Starting disk [35524.514079] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [35524.514084] tpm tpm0: TPM is disabled/deactivated (0x6) [35524.732918] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [35524.799608] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35524.799992] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35524.799997] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35524.800040] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35524.800570] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35524.800574] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35524.800613] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35524.800728] ata2.00: configured for UDMA/133 [35525.009015] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [35525.233062] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [35525.264186] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [35525.285100] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [35525.435259] acpi LNXPOWER:02: Turning OFF [35525.435497] OOM killer enabled. [35525.435499] Restarting tasks ... done. [35525.447649] thermal thermal_zone3: failed to read out thermal zone (-61) [35525.449479] Bluetooth: hci0: read Intel version: 370810011003110e00 [35525.449484] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [35525.469260] PM: suspend exit [35525.725466] Bluetooth: hci0: Intel firmware patch completed and activated [35525.760206] e1000e: enp0s25 NIC Link is Down [35525.762314] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [35525.948876] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [35525.951657] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35526.056108] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35526.170842] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35531.859160] wlp3s0: authenticate with 18:0f:76:9f:c6:6d [35531.864888] wlp3s0: send auth to 18:0f:76:9f:c6:6d (try 1/3) [35531.866210] wlp3s0: authenticated [35531.868709] wlp3s0: associate with 18:0f:76:9f:c6:6d (try 1/3) [35531.869874] wlp3s0: RX AssocResp from 18:0f:76:9f:c6:6d (capab=0x411 status=0 aid=2) [35531.873374] wlp3s0: associated [35531.878927] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 18:0f:76:9f:c6:6d [35531.881369] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [35653.341658] wlp3s0: deauthenticating from 18:0f:76:9f:c6:6d by local choice (Reason: 3=DEAUTH_LEAVING) [35653.683570] PM: Starting manual resume from disk [35653.683773] PM: Image not found (code -22) [35653.981716] PM: hibernation entry [35653.989368] PM: Syncing filesystems ... [35654.047810] PM: done. [35654.047812] Freezing user space processes ... (elapsed 0.002 seconds) done. [35654.050013] OOM killer disabled. [35654.050060] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [35654.050061] PM: Marking nosave pages: [mem 0x00058000-0x00058fff] [35654.050062] PM: Marking nosave pages: [mem 0x0009c000-0x0009cfff] [35654.050062] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [35654.050065] PM: Marking nosave pages: [mem 0xca7ce000-0xccdfefff] [35654.050209] PM: Marking nosave pages: [mem 0xcce00000-0xffffffff] [35654.050781] PM: Basic memory bitmaps created [35654.050864] PM: Preallocating image memory... done (allocated 376701 pages) [35666.560571] PM: Allocated 1506804 kbytes in 12.50 seconds (120.54 MB/s) [35666.560571] Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. [35666.568565] Suspending console(s) (use no_console_suspend to debug) [35667.045668] ACPI: EC: interrupt blocked [35667.048060] ACPI: Preparing to enter system sleep state S4 [35667.053049] ACPI: EC: event blocked [35667.053050] ACPI: EC: EC stopped [35667.053051] PM: Saving platform NVS memory [35667.054838] Disabling non-boot CPUs ... [35667.071187] smpboot: CPU 1 is now offline [35667.093747] IRQ 46: no longer affine to CPU2 [35667.094778] smpboot: CPU 2 is now offline [35667.117616] IRQ 23: no longer affine to CPU3 [35667.117629] IRQ 50: no longer affine to CPU3 [35667.118642] smpboot: CPU 3 is now offline [35667.119220] PM: Creating hibernation image: [35667.306363] PM: Need to copy 369385 pages [35667.306369] PM: Normal pages needed: 369385 + 1024, available pages: 648233 [35667.119957] PM: Restoring platform NVS memory [35667.120165] ACPI: EC: EC started [35667.120559] Enabling non-boot CPUs ... [35667.120621] x86: Booting SMP configuration: [35667.120623] smpboot: Booting Node 0 Processor 1 APIC 0x1 [35667.121489] cache: parent cpu1 should not be sleeping [35667.121759] CPU1 is up [35667.121802] smpboot: Booting Node 0 Processor 2 APIC 0x2 [35667.122646] cache: parent cpu2 should not be sleeping [35667.122941] CPU2 is up [35667.122976] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35667.123797] cache: parent cpu3 should not be sleeping [35667.124109] CPU3 is up [35667.130276] ACPI: Waking up from system sleep state S4 [35667.134340] thinkpad_acpi: EC reports that Thermal Table has changed [35667.136686] ACPI: EC: interrupt unblocked [35667.218939] usb usb2: root hub lost power or was reset [35667.218943] usb usb3: root hub lost power or was reset [35667.219188] ACPI: button: The lid device is not compliant to SW_LID. [35667.219198] ACPI: EC: event unblocked [35667.219582] usb usb1: root hub lost power or was reset [35667.222709] sd 1:0:0:0: [sda] Starting disk [35667.223476] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [35667.223694] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. [35667.252806] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [35667.252808] tpm tpm0: TPM is disabled/deactivated (0x6) [35667.537495] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35667.537960] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35667.537968] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35667.538002] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35667.538744] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [35667.538751] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [35667.538780] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [35667.538912] ata2.00: configured for UDMA/133 [35667.566580] usb 1-1: reset high-speed USB device number 2 using ehci-pci [35667.574614] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [35667.850589] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [35667.965987] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [35667.996851] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [35668.126645] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [35668.276235] acpi LNXPOWER:02: Turning OFF [35668.276503] PM: Basic memory bitmaps freed [35668.276511] OOM killer enabled. [35668.276512] Restarting tasks ... done. [35668.286538] thermal thermal_zone3: failed to read out thermal zone (-61) [35668.293326] Bluetooth: hci0: read Intel version: 370810011003110e00 [35668.311111] PM: hibernation exit [35668.336853] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [35668.553312] Bluetooth: hci0: Intel firmware patch completed and activated [35669.369956] e1000e: enp0s25 NIC Link is Down [35669.375348] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [35669.566747] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [35669.570368] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35669.682447] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35669.818114] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35698.764383] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [35702.268828] wlp3s0: authenticate with 78:f5:fd:cb:10:48 [35702.273240] wlp3s0: send auth to 78:f5:fd:cb:10:48 (try 1/3) [35702.276482] wlp3s0: authenticated [35702.278612] wlp3s0: associate with 78:f5:fd:cb:10:48 (try 1/3) [35702.284743] wlp3s0: RX AssocResp from 78:f5:fd:cb:10:48 (capab=0x431 status=0 aid=3) [35702.290143] wlp3s0: associated [35702.498140] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [35702.666647] usb 2-2: new low-speed USB device number 6 using xhci_hcd [35702.817753] usb 2-2: New USB device found, idVendor=093a, idProduct=2510 [35702.817756] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [35702.817757] usb 2-2: Product: USB Optical Mouse [35702.817758] usb 2-2: Manufacturer: PixArt [35702.819935] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:093A:2510.0002/input/input20 [35702.820075] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0 [35947.247004] nfs: server filer not responding, timed out [36217.583249] nfs: server filer not responding, timed out [36514.543242] nfs: server filer not responding, timed out [36514.543268] nfs: server filer not responding, timed out [36735.727405] nfs: server filer not responding, timed out [36735.727425] nfs: server filer not responding, timed out [37042.927079] nfs: server filer not responding, timed out [37042.927091] nfs: server filer not responding, timed out [37264.111007] nfs: server filer not responding, still trying [41280.480375] usb 2-2: USB disconnect, device number 6 [41663.365705] thinkpad_acpi: EC reports that Thermal Table has changed [41664.702125] wlp3s0: deauthenticating from 78:f5:fd:cb:10:48 by local choice (Reason: 3=DEAUTH_LEAVING) [41665.002985] PM: suspend entry (deep) [41665.002987] PM: Syncing filesystems ... done. [41665.154656] Freezing user space processes ... (elapsed 0.002 seconds) done. [41665.156882] OOM killer disabled. [41665.156883] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41665.158258] Suspending console(s) (use no_console_suspend to debug) [41665.297231] sd 1:0:0:0: [sda] Synchronizing SCSI cache [41665.298631] sd 1:0:0:0: [sda] Stopping disk [41665.498263] e1000e: EEE TX LPI TIMER: 00000011 [41666.213612] ACPI: EC: interrupt blocked [41666.253498] ACPI: Preparing to enter system sleep state S3 [41666.257949] ACPI: EC: event blocked [41666.257950] ACPI: EC: EC stopped [41666.257951] PM: Saving platform NVS memory [41666.257968] Disabling non-boot CPUs ... [41666.274459] smpboot: CPU 1 is now offline [41666.293596] IRQ 46: no longer affine to CPU2 [41666.294640] smpboot: CPU 2 is now offline [41666.317541] IRQ 23: no longer affine to CPU3 [41666.317554] IRQ 50: no longer affine to CPU3 [41666.318566] smpboot: CPU 3 is now offline [41666.320466] ACPI: Low-level resume complete [41666.320529] ACPI: EC: EC started [41666.320530] PM: Restoring platform NVS memory [41666.322874] Enabling non-boot CPUs ... [41666.322921] x86: Booting SMP configuration: [41666.322922] smpboot: Booting Node 0 Processor 1 APIC 0x1 [41666.323319] cache: parent cpu1 should not be sleeping [41666.323470] CPU1 is up [41666.323499] smpboot: Booting Node 0 Processor 2 APIC 0x2 [41666.325080] cache: parent cpu2 should not be sleeping [41666.325250] CPU2 is up [41666.325287] smpboot: Booting Node 0 Processor 3 APIC 0x3 [41666.325752] cache: parent cpu3 should not be sleeping [41666.325927] CPU3 is up [41666.328902] ACPI: Waking up from system sleep state S3 [41666.335377] ACPI: EC: interrupt unblocked [41666.388706] ACPI: EC: event unblocked [41666.389104] sd 1:0:0:0: [sda] Starting disk [41666.421797] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [41666.421802] tpm tpm0: TPM is disabled/deactivated (0x6) [41666.635291] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [41666.701847] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41666.702076] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41666.702079] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41666.702099] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41666.702437] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [41666.702439] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [41666.702459] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [41666.702570] ata2.00: configured for UDMA/133 [41666.911313] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [41667.133314] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [41667.164144] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [41667.187365] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [41667.337351] acpi LNXPOWER:02: Turning OFF [41667.337627] OOM killer enabled. [41667.337629] Restarting tasks ... [41667.351688] Bluetooth: hci0: read Intel version: 370810011003110e00 [41667.351694] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [41667.351784] nfs: server filer not responding, timed out [41667.361861] done. [41667.367492] thermal thermal_zone3: failed to read out thermal zone (-61) [41667.390698] PM: suspend exit [41667.565943] e1000e: enp0s25 NIC Link is Down [41667.567475] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [41667.627678] Bluetooth: hci0: Intel firmware patch completed and activated [41667.751178] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [41667.752272] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41667.865957] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41667.928669] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [41847.931388] nfs: server filer not responding, timed out [41847.931406] nfs: server filer not responding, timed out [41847.931416] nfs: server filer not responding, timed out [41847.931422] nfs: server filer not responding, timed out [41852.923408] nfs: server filer not responding, timed out [42029.051712] nfs: server filer not responding, timed out [42029.051833] nfs: server filer not responding, timed out [42038.267757] nfs: server filer not responding, timed out [42061.170627] wlp3s0: authenticate with 58:97:bd:d7:cd:60 [42061.175542] wlp3s0: send auth to 58:97:bd:d7:cd:60 (try 1/3) [42061.186420] wlp3s0: authenticated [42061.187746] wlp3s0: associate with 58:97:bd:d7:cd:60 (try 1/3) [42061.192202] wlp3s0: RX AssocResp from 58:97:bd:d7:cd:60 (capab=0x421 status=0 aid=1) [42061.194371] wlp3s0: associated [42061.198356] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [42061.216756] wlp3s0: Limiting TX power to 16 dBm as advertised by 58:97:bd:d7:cd:60 [42244.860168] nfs: server filer not responding, timed out [42552.060694] nfs: server filer not responding, timed out [42773.245279] nfs: server filer not responding, timed out [46975.557956] thinkpad_acpi: EC reports that Thermal Table has changed [47246.119848] TCP: tun1: Driver has suspect GRO implementation, TCP performance may be compromised.