[ 0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17 [ 0.000000] Linux version 4.18.0-13-generic (buildd@lgw01-amd64-048) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #14-Ubuntu SMP Wed Dec 5 09:04:24 UTC 2018 (Ubuntu 4.18.0-13.14-generic 4.18.17) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/crypt-root ro quiet splash vt.handoff=1 iommu=pt [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000086490fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000086491000-0x0000000086491fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000086492000-0x00000000864bbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000864bc000-0x000000008a246fff] usable [ 0.000000] BIOS-e820: [mem 0x000000008a247000-0x000000008a549fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008a54a000-0x000000008a581fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008a582000-0x000000008ae73fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008ae74000-0x000000008b2fefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008b2ff000-0x000000008b2fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000008b300000-0x000000008b3fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: /NUC6i3SYB, BIOS SYSKLi35.86A.0042.2016.0409.1246 04/09/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x46f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 008B800000 mask 7FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0x8b300 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcba0-0x000fcbaf] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x228f5c000, 0x228f5cfff] PGTABLE [ 0.000000] BRK [0x228f5d000, 0x228f5dfff] PGTABLE [ 0.000000] BRK [0x228f5e000, 0x228f5efff] PGTABLE [ 0.000000] BRK [0x228f5f000, 0x228f5ffff] PGTABLE [ 0.000000] BRK [0x228f60000, 0x228f60fff] PGTABLE [ 0.000000] BRK [0x228f61000, 0x228f61fff] PGTABLE [ 0.000000] BRK [0x228f62000, 0x228f62fff] PGTABLE [ 0.000000] BRK [0x228f63000, 0x228f63fff] PGTABLE [ 0.000000] BRK [0x228f64000, 0x228f64fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34667000-0x3632afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x000000008A555098 0000B4 (v01 INTEL NUC6i3SY 0000002A AMI 00010013) [ 0.000000] ACPI: FACP 0x000000008A576EF8 00010C (v05 INTEL NUC6i3SY 0000002A AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000008A5551E0 021D12 (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: FACS 0x000000008AE73F80 000040 [ 0.000000] ACPI: APIC 0x000000008A577008 000084 (v03 INTEL NUC6i3SY 0000002A AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000008A577090 000044 (v01 INTEL NUC6i3SY 0000002A AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000008A5770D8 00009C (v01 INTEL NUC6i3SY 0000002A AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000008A577178 00003C (v01 INTEL NUC6i3SY 0000002A MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000008A5771B8 000038 (v01 INTEL NUC6i3SY 0000002A AMI. 0005000B) [ 0.000000] ACPI: LPIT 0x000000008A5771F0 000094 (v01 INTEL NUC6i3SY 0000002A MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000008A577288 000248 (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000008A5774D0 002BAE (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000008A57A080 000BE3 (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000008A57AC68 0004A3 (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: DBGP 0x000000008A57B110 000034 (v01 INTEL NUC6i3SY 0000002A MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000008A57B148 000054 (v00 INTEL NUC6i3SY 0000002A MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000008A57B1A0 00046E (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000008A57B610 00546C (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: UEFI 0x000000008A580A80 000042 (v01 INTEL NUC6i3SY 0000002A 00000000) [ 0.000000] ACPI: SSDT 0x000000008A580AC8 000E73 (v02 INTEL NUC6i3SY 0000002A INTL 20120913) [ 0.000000] ACPI: DMAR 0x000000008A581940 0000CC (v01 INTEL NUC6i3SY 0000002A INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x46efd5000-0x46effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000046effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000086490fff] [ 0.000000] node 0: [mem 0x00000000864bc000-0x000000008a246fff] [ 0.000000] node 0: [mem 0x000000008b2ff000-0x000000008b2fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000046effffff] [ 0.000000] Reserved but unavailable: 24136 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff] [ 0.000000] On node 0 totalpages: 4166072 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8777 pages used for memmap [ 0.000000] DMA32 zone: 561693 pages, LIFO batch:31 [ 0.000000] Normal zone: 56256 pages used for memmap [ 0.000000] Normal zone: 3600384 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x86491000-0x86491fff] [ 0.000000] PM: Registered nosave memory: [mem 0x86492000-0x864bbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a247000-0x8a549fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a54a000-0x8a581fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a582000-0x8ae73fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8ae74000-0x8b2fefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8b300000-0x8b3fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8b400000-0x8bffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4100954 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/crypt-root ro quiet splash vt.handoff=1 iommu=pt [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16277620K/16664288K available (12300K kernel code, 2633K rwdata, 4352K rodata, 2440K init, 2336K bss, 386668K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 40813 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 39 [ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.004000] DMAR: RMRR base: 0x0000008a2ec000 end: 0x0000008a30bfff [ 0.004000] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff [ 0.004000] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00 [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.004000] x2apic enabled [ 0.004000] Switched APIC routing to cluster x2apic. [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 2300.000 MHz processor [ 0.028000] tsc: Detected 2304.000 MHz TSC [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028000] mce: CPU supports 8 MCE banks [ 0.028000] CPU0: Thermal monitoring enabled (TM1) [ 0.028000] process: using mwait in idle threads [ 0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.028000] Spectre V2 : Mitigation: Full generic retpoline [ 0.028000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.036798] Freeing SMP alternatives memory: 36K [ 0.040071] TSC deadline timer enabled [ 0.040075] smpboot: CPU0: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.040161] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.040198] ... version: 4 [ 0.040198] ... bit width: 48 [ 0.040199] ... generic registers: 4 [ 0.040200] ... value mask: 0000ffffffffffff [ 0.040200] ... max period: 00007fffffffffff [ 0.040201] ... fixed-purpose events: 3 [ 0.040201] ... event mask: 000000070000000f [ 0.040238] Hierarchical SRCU implementation. [ 0.041202] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.041215] smp: Bringing up secondary CPUs ... [ 0.041290] x86: Booting SMP configuration: [ 0.041291] .... node #0, CPUs: #1 #2 #3 [ 0.044495] smp: Brought up 1 node, 4 CPUs [ 0.044495] smpboot: Max logical packages: 1 [ 0.044495] smpboot: Total of 4 processors activated (18432.00 BogoMIPS) [ 0.048362] devtmpfs: initialized [ 0.048362] x86/mm: Memory block size: 128MB [ 0.049261] PM: Registering ACPI NVS region [mem 0x86491000-0x86491fff] (4096 bytes) [ 0.049261] PM: Registering ACPI NVS region [mem 0x8a582000-0x8ae73fff] (9379840 bytes) [ 0.049261] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.049261] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.049261] pinctrl core: initialized pinctrl subsystem [ 0.049261] RTC time: 7:11:30, date: 12/22/18 [ 0.049261] NET: Registered protocol family 16 [ 0.049261] audit: initializing netlink subsys (disabled) [ 0.049261] audit: type=2000 audit(1545462690.048:1): state=initialized audit_enabled=0 res=1 [ 0.049261] cpuidle: using governor ladder [ 0.049261] cpuidle: using governor menu [ 0.049261] ACPI: bus type PCI registered [ 0.049261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.049261] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.049261] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.049261] PCI: Using configuration type 1 for base access [ 0.052120] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.052120] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052120] ACPI: Added _OSI(Module Device) [ 0.052120] ACPI: Added _OSI(Processor Device) [ 0.052120] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052120] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052120] ACPI: Added _OSI(Linux-Dell-Video) [ 0.052120] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.097978] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.106396] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.110789] ACPI: Dynamic OEM Table Load: [ 0.110796] ACPI: SSDT 0xFFFF9F681C355800 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.111523] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.113563] ACPI: Dynamic OEM Table Load: [ 0.113569] ACPI: SSDT 0xFFFF9F681BDA3400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.114146] ACPI: Dynamic OEM Table Load: [ 0.114150] ACPI: SSDT 0xFFFF9F681BCC4C00 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913) [ 0.114572] ACPI: Dynamic OEM Table Load: [ 0.114576] ACPI: SSDT 0xFFFF9F681BCDA200 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913) [ 0.115675] ACPI: Dynamic OEM Table Load: [ 0.115681] ACPI: SSDT 0xFFFF9F681C356000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.116649] ACPI: Dynamic OEM Table Load: [ 0.116654] ACPI: SSDT 0xFFFF9F681BCDAA00 000119 (v02 PmRef ApHwp 00003000 INTL 20120913) [ 0.117184] ACPI: Dynamic OEM Table Load: [ 0.117188] ACPI: SSDT 0xFFFF9F681BCDA600 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.121394] ACPI: Interpreter enabled [ 0.121438] ACPI: (supports S0 S3 S4 S5) [ 0.121439] ACPI: Using IOAPIC for interrupt routing [ 0.121489] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.122731] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.126103] ACPI: Power Resource [PG00] (on) [ 0.126591] ACPI: Power Resource [PG01] (on) [ 0.127059] ACPI: Power Resource [PG02] (on) [ 0.129875] ACPI: Power Resource [WRST] (on) [ 0.130370] ACPI: Power Resource [WRST] (on) [ 0.130854] ACPI: Power Resource [WRST] (on) [ 0.131337] ACPI: Power Resource [WRST] (on) [ 0.131820] ACPI: Power Resource [WRST] (on) [ 0.132307] ACPI: Power Resource [WRST] (on) [ 0.132788] ACPI: Power Resource [WRST] (on) [ 0.133272] ACPI: Power Resource [WRST] (on) [ 0.133756] ACPI: Power Resource [WRST] (on) [ 0.134722] ACPI: Power Resource [WRST] (on) [ 0.135203] ACPI: Power Resource [WRST] (on) [ 0.135697] ACPI: Power Resource [WRST] (on) [ 0.136193] ACPI: Power Resource [WRST] (on) [ 0.136677] ACPI: Power Resource [WRST] (on) [ 0.137160] ACPI: Power Resource [WRST] (on) [ 0.137644] ACPI: Power Resource [WRST] (on) [ 0.138125] ACPI: Power Resource [WRST] (on) [ 0.138607] ACPI: Power Resource [WRST] (on) [ 0.139092] ACPI: Power Resource [WRST] (on) [ 0.139573] ACPI: Power Resource [WRST] (on) [ 0.154992] ACPI: Power Resource [FN00] (off) [ 0.155121] ACPI: Power Resource [FN01] (off) [ 0.155247] ACPI: Power Resource [FN02] (off) [ 0.155370] ACPI: Power Resource [FN03] (off) [ 0.155496] ACPI: Power Resource [FN04] (off) [ 0.157181] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.157188] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.159339] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.160475] PCI host bridge to bus 0000:00 [ 0.160477] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.160479] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.160480] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.160482] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 0.160483] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.160485] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.160495] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.160960] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.160972] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit] [ 0.160978] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.160983] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.161238] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.161262] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit] [ 0.161342] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.161625] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.161647] pci 0000:00:14.2: reg 0x10: [mem 0xdf150000-0xdf150fff 64bit] [ 0.161864] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.161884] pci 0000:00:16.0: reg 0x10: [mem 0xdf14f000-0xdf14ffff 64bit] [ 0.161941] pci 0000:00:16.0: PME# supported from D3hot [ 0.162142] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.162161] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff] [ 0.162169] pci 0000:00:17.0: reg 0x14: [mem 0xdf14e000-0xdf14e0ff] [ 0.162177] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.162185] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.162192] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.162200] pci 0000:00:17.0: reg 0x24: [mem 0xdf14d000-0xdf14d7ff] [ 0.162244] pci 0000:00:17.0: PME# supported from D3hot [ 0.162452] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.162549] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.162910] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000 [ 0.163173] pci 0000:00:1e.0: reg 0x10: [mem 0xdf14c000-0xdf14cfff 64bit] [ 0.164198] pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501 [ 0.164222] pci 0000:00:1e.6: reg 0x10: [mem 0xdf14b000-0xdf14bfff 64bit] [ 0.164503] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.164804] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.164821] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff] [ 0.165069] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.165100] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit] [ 0.165136] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit] [ 0.165191] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.165468] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.165528] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit] [ 0.165598] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.165862] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000 [ 0.165888] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff] [ 0.165994] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.166602] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000 [ 0.166707] pci 0000:01:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit] [ 0.167248] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.167949] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.167954] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff] [ 0.170816] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.170907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.170994] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.171075] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.171162] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.171246] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.171335] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.171425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.172363] SCSI subsystem initialized [ 0.172376] libata version 3.00 loaded. [ 0.172376] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.172376] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.172376] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.172376] vgaarb: loaded [ 0.172376] ACPI: bus type USB registered [ 0.172376] usbcore: registered new interface driver usbfs [ 0.172376] usbcore: registered new interface driver hub [ 0.172376] usbcore: registered new device driver usb [ 0.172376] pps_core: LinuxPPS API ver. 1 registered [ 0.172376] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.172376] PTP clock support registered [ 0.172376] EDAC MC: Ver: 3.0.0 [ 0.172376] PCI: Using ACPI for IRQ routing [ 0.197147] PCI: pci_cache_line_size set to 64 bytes [ 0.197698] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 0.197699] e820: reserve RAM buffer [mem 0x86491000-0x87ffffff] [ 0.197700] e820: reserve RAM buffer [mem 0x8a247000-0x8bffffff] [ 0.197702] e820: reserve RAM buffer [mem 0x8b300000-0x8bffffff] [ 0.197703] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff] [ 0.200001] NetLabel: Initializing [ 0.200001] NetLabel: domain hash size = 128 [ 0.200001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.200001] NetLabel: unlabeled traffic allowed by default [ 0.200436] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.200442] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.204016] clocksource: Switched to clocksource tsc-early [ 0.215151] VFS: Disk quotas dquot_6.6.0 [ 0.215163] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.215267] AppArmor: AppArmor Filesystem Enabled [ 0.215296] pnp: PnP ACPI init [ 0.215695] system 00:00: [io 0x0a00-0x0a2f] has been reserved [ 0.215697] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 0.215698] system 00:00: [io 0x0a40-0x0a4f] has been reserved [ 0.215704] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216197] pnp 00:01: [dma 0 disabled] [ 0.216228] pnp 00:01: Plug and Play ACPI device, IDs ITE8713 (active) [ 0.216399] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.216401] system 00:02: [io 0xffff] has been reserved [ 0.216402] system 00:02: [io 0xffff] has been reserved [ 0.216404] system 00:02: [io 0xffff] has been reserved [ 0.216406] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.216407] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.216411] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216526] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.216572] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.216575] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.216893] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.216895] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.216897] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.216898] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.216900] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.216902] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.216904] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.216905] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.216907] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.216909] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.216913] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216962] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.216964] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.216966] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.216967] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.216969] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.216971] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.216972] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.216976] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.217356] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.217360] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218825] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.218828] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.218832] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220073] pnp: PnP ACPI: found 9 devices [ 0.225769] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.225790] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.225802] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff] [ 0.225810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.225812] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.225813] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.225815] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] [ 0.225816] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.225818] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff] [ 0.226007] NET: Registered protocol family 2 [ 0.226160] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.226206] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.226366] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.226466] TCP: Hash tables configured (established 131072 bind 65536) [ 0.226495] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.226533] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.226590] NET: Registered protocol family 1 [ 0.226594] NET: Registered protocol family 44 [ 0.226604] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.227175] PCI: CLS 0 bytes, default 64 [ 0.227207] Unpacking initramfs... [ 0.686521] Freeing initrd memory: 29456K [ 0.686569] DMAR: ACPI device "device:67" under DMAR at fed91000 as 00:1e.0 [ 0.708058] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.708060] software IO TLB [mem 0x82491000-0x86491000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 0.708199] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns [ 0.708209] clocksource: Switched to clocksource tsc [ 0.708268] Scanning for low memory corruption every 60 seconds [ 0.708928] Initialise system trusted keyrings [ 0.708937] Key type blacklist registered [ 0.708957] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.710185] zbud: loaded [ 0.710687] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.710844] fuse init (API version 7.27) [ 0.710893] pstore: using deflate compression [ 0.711907] Key type asymmetric registered [ 0.711908] Asymmetric key parser 'x509' registered [ 0.711935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.711961] io scheduler noop registered [ 0.711962] io scheduler deadline registered [ 0.711987] io scheduler cfq registered (default) [ 0.712528] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 0.712546] pcieport 0000:00:1c.0: Signaling PME with IRQ 122 [ 0.712577] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.712630] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.712631] vesafb: scrolling: redraw [ 0.712632] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.712643] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k [ 0.712719] Console: switching to colour frame buffer device 240x67 [ 0.712745] fb0: VESA VGA frame buffer device [ 0.712758] intel_idle: MWAIT substates: 0x11142120 [ 0.712759] intel_idle: v0.4.1 model 0x4E [ 0.712956] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.713136] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.713144] ACPI: Sleep Button [SLPB] [ 0.713175] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.713180] ACPI: Power Button [PWRB] [ 0.713212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.713221] ACPI: Power Button [PWRF] [ 0.832427] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.832429] ACPI: Thermal Zone [TZ00] (28 C) [ 0.832673] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.832674] ACPI: Thermal Zone [TZ01] (30 C) [ 0.833025] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.835666] Linux agpgart interface v0.103 [ 0.837149] loop: module loaded [ 0.837324] libphy: Fixed MDIO Bus: probed [ 0.837325] tun: Universal TUN/TAP device driver, 1.6 [ 0.837398] PPP generic driver version 2.4.2 [ 0.837440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.837443] ehci-pci: EHCI PCI platform driver [ 0.837453] ehci-platform: EHCI generic platform driver [ 0.837462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.837463] ohci-pci: OHCI PCI platform driver [ 0.837471] ohci-platform: OHCI generic platform driver [ 0.837478] uhci_hcd: USB Universal Host Controller Interface driver [ 0.837680] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.837690] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.838769] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810 [ 0.838774] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.838958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.838960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.838962] usb usb1: Product: xHCI Host Controller [ 0.838963] usb usb1: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 0.838964] usb usb1: SerialNumber: 0000:00:14.0 [ 0.839106] hub 1-0:1.0: USB hub found [ 0.839127] hub 1-0:1.0: 12 ports detected [ 0.840584] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.840587] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.840590] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.840627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 0.840629] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.840630] usb usb2: Product: xHCI Host Controller [ 0.840631] usb usb2: Manufacturer: Linux 4.18.0-13-generic xhci-hcd [ 0.840633] usb usb2: SerialNumber: 0000:00:14.0 [ 0.840712] hub 2-0:1.0: USB hub found [ 0.840727] hub 2-0:1.0: 6 ports detected [ 0.841713] i8042: PNP: No PS/2 controller found. [ 0.841758] mousedev: PS/2 mouse device common for all mice [ 0.841881] rtc_cmos 00:03: RTC can wake from S4 [ 0.842211] rtc rtc0: invalid alarm value: 2018-12-22 7:65:31 [ 0.842235] rtc_cmos 00:03: registered as rtc0 [ 0.842248] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.842254] i2c /dev entries driver [ 0.842258] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 0.842319] device-mapper: uevent: version 1.0.3 [ 0.842367] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 0.842370] intel_pstate: Intel P-state driver initializing [ 0.842576] intel_pstate: HWP enabled [ 0.842604] ledtrig-cpu: registered to indicate activity on CPUs [ 0.842713] intel_pmc_core: initialized [ 0.842915] NET: Registered protocol family 10 [ 0.846971] Segment Routing with IPv6 [ 0.846992] NET: Registered protocol family 17 [ 0.847019] Key type dns_resolver registered [ 0.847310] RAS: Correctable Errors collector initialized. [ 0.847342] microcode: sig=0x406e3, pf=0x80, revision=0xc6 [ 0.847439] microcode: Microcode Update Driver: v2.2. [ 0.847448] sched_clock: Marking stable (847435977, 0)->(946272488, -98836511) [ 0.847634] registered taskstats version 1 [ 0.847640] Loading compiled-in X.509 certificates [ 0.850245] Loaded X.509 cert 'Build time autogenerated kernel key: 0a4c8c749a456fd3db5c73dc83f83eab291d4463' [ 0.850262] zswap: loaded using pool lzo/zbud [ 0.854247] Key type big_key registered [ 0.854251] Key type trusted registered [ 0.856150] Key type encrypted registered [ 0.856153] AppArmor: AppArmor sha1 policy hashing enabled [ 0.856162] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.856166] ima: Allocated hash algorithm: sha1 [ 0.856177] evm: Initialising EVM extended attributes: [ 0.856177] evm: security.selinux [ 0.856178] evm: security.SMACK64 [ 0.856178] evm: security.SMACK64EXEC [ 0.856179] evm: security.SMACK64TRANSMUTE [ 0.856179] evm: security.SMACK64MMAP [ 0.856180] evm: security.apparmor [ 0.856180] evm: security.ima [ 0.856181] evm: security.capability [ 0.856181] evm: HMAC attrs: 0x1 [ 0.857283] Magic number: 14:48:168 [ 0.857323] acpi device:31: hash matches [ 0.857465] rtc_cmos 00:03: setting system clock to 2018-12-22 07:11:31 UTC (1545462691) [ 1.180044] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.207797] Freeing unused kernel image memory: 2440K [ 1.228118] Write protecting the kernel read-only data: 20480k [ 1.229370] Freeing unused kernel image memory: 2008K [ 1.229679] Freeing unused kernel image memory: 1792K [ 1.239369] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.239369] x86/mm: Checking user space page tables [ 1.248828] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.334129] ahci 0000:00:17.0: version 3.0 [ 1.334450] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 1.334454] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.335048] scsi host0: ahci [ 1.335122] usb 1-2: New USB device found, idVendor=0bda, idProduct=5401, bcdDevice= 1.29 [ 1.335125] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.335127] usb 1-2: Product: 4-Port USB 2.0 Hub [ 1.335129] usb 1-2: Manufacturer: Generic [ 1.335705] hub 1-2:1.0: USB hub found [ 1.336561] hub 1-2:1.0: 4 ports detected [ 1.337162] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.337163] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.337429] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.339233] cryptd: max_cpu_qlen set to 1000 [ 1.340032] scsi host1: ahci [ 1.343600] AVX2 version of gcm_enc/dec engaged. [ 1.343602] AES CTR mode by8 optimization enabled [ 1.345133] scsi host2: ahci [ 1.345206] ata1: SATA max UDMA/133 abar m2048@0xdf14d000 port 0xdf14d100 irq 124 [ 1.345208] ata2: DUMMY [ 1.345210] ata3: SATA max UDMA/133 abar m2048@0xdf14d000 port 0xdf14d200 irq 124 [ 1.544744] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.574951] usb 2-2: New USB device found, idVendor=0bda, idProduct=0401, bcdDevice= 1.29 [ 1.574953] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.574954] usb 2-2: Product: 4-Port USB 3.0 Hub [ 1.574956] usb 2-2: Manufacturer: Generic [ 1.583478] hub 2-2:1.0: USB hub found [ 1.584878] hub 2-2:1.0: 4 ports detected [ 1.659420] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.659462] ata1: SATA link down (SStatus 4 SControl 300) [ 1.661228] ata3.00: supports DRM functions and may not be fully accessible [ 1.662348] ata3.00: disabling queued TRIM support [ 1.662366] ata3.00: ATA-9: Samsung SSD 850 EVO M.2 250GB, EMT21B6Q, max UDMA/133 [ 1.662367] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.664959] ata3.00: supports DRM functions and may not be fully accessible [ 1.665926] ata3.00: disabling queued TRIM support [ 1.667899] ata3.00: configured for UDMA/133 [ 1.677977] ahci 0000:00:17.0: port does not support device sleep [ 1.678192] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.678442] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.678486] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.678500] sd 2:0:0:0: [sda] Write Protect is off [ 1.678502] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.678527] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.679055] sda: sda1 sda2 < sda5 > [ 1.679846] sd 2:0:0:0: [sda] supports TCG Opal [ 1.679847] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.700111] usb 1-3: new low-speed USB device number 3 using xhci_hcd [ 1.749340] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.820420] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:ea:3c:bd [ 1.820423] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.820528] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.821384] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 1.853033] usb 1-3: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01 [ 1.853035] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.853037] usb 1-3: Product: USB Laser Mouse [ 1.853038] usb 1-3: Manufacturer: Logitech [ 1.928118] usb 1-2.1: new high-speed USB device number 4 using xhci_hcd [ 2.035400] usb 1-2.1: New USB device found, idVendor=04f9, idProduct=0042, bcdDevice= 1.00 [ 2.035402] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.035403] usb 1-2.1: Product: HL-2270DW series [ 2.035405] usb 1-2.1: Manufacturer: Brother [ 2.035406] usb 1-2.1: SerialNumber: M0J491117 [ 2.156114] usb 1-4: new full-speed USB device number 5 using xhci_hcd [ 2.305923] usb 1-4: New USB device found, idVendor=05ac, idProduct=0255, bcdDevice= 1.12 [ 2.305926] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.305927] usb 1-4: Product: AZIO RCK AM V1.00 [ 2.305928] usb 1-4: Manufacturer: SONiX [ 2.384118] usb 1-2.2: new low-speed USB device number 6 using xhci_hcd [ 2.506140] usb 1-2.2: New USB device found, idVendor=045e, idProduct=00db, bcdDevice= 1.73 [ 2.506143] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.506144] usb 1-2.2: Product: Natural® Ergonomic Keyboard 4000 [ 2.506146] usb 1-2.2: Manufacturer: Microsoft [ 2.612117] usb 1-7: new full-speed USB device number 7 using xhci_hcd [ 2.740136] random: fast init done [ 2.761415] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 2.761417] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.761591] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.761599] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.761620] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.767911] hidraw: raw HID events driver (C) Jiri Kosina [ 2.790712] usbcore: registered new interface driver usbhid [ 2.790713] usbhid: USB HID core driver [ 2.792644] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C069.0001/input/input3 [ 2.792767] hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-3/input0 [ 2.792939] input: SONiX AZIO RCK AM V1.00 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:05AC:0255.0002/input/input4 [ 2.840117] usb 1-2.3: new full-speed USB device number 8 using xhci_hcd [ 2.852426] hid-generic 0003:05AC:0255.0002: input,hidraw1: USB HID v1.11 Keyboard [SONiX AZIO RCK AM V1.00] on usb-0000:00:14.0-4/input0 [ 2.852701] input: SONiX AZIO RCK AM V1.00 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:05AC:0255.0003/input/input5 [ 2.912359] input: SONiX AZIO RCK AM V1.00 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:05AC:0255.0003/input/input6 [ 2.912498] input: SONiX AZIO RCK AM V1.00 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:05AC:0255.0003/input/input7 [ 2.912617] input: SONiX AZIO RCK AM V1.00 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:05AC:0255.0003/input/input8 [ 2.912825] hid-generic 0003:05AC:0255.0003: input,hidraw2: USB HID v1.11 Keyboard [SONiX AZIO RCK AM V1.00] on usb-0000:00:14.0-4/input1 [ 2.946996] usb 1-2.3: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.28 [ 2.947015] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.947017] usb 1-2.3: Product: Yubikey 4 OTP+U2F+CCID [ 2.947018] usb 1-2.3: Manufacturer: Yubico [ 2.965590] input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:1050:0407.0006/input/input9 [ 3.024411] hid-generic 0003:1050:0407.0006: input,hidraw3: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-2.3/input0 [ 3.025406] hid-generic 0003:1050:0407.0007: hiddev0,hidraw4: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-2.3/input1 [ 3.104120] usb 1-2.4: new full-speed USB device number 9 using xhci_hcd [ 3.206903] usb 1-2.4: New USB device found, idVendor=1050, idProduct=0403, bcdDevice= 4.18 [ 3.206922] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.206923] usb 1-2.4: Product: Yubikey 4 OTP+U2F [ 3.206925] usb 1-2.4: Manufacturer: Yubico [ 3.217198] input: Yubico Yubikey 4 OTP+U2F as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:1050:0403.0008/input/input10 [ 3.276423] hid-generic 0003:1050:0403.0008: input,hidraw5: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F] on usb-0000:00:14.0-2.4/input0 [ 3.277455] hid-generic 0003:1050:0403.0009: hiddev1,hidraw6: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F] on usb-0000:00:14.0-2.4/input1 [ 4.440011] raid6: sse2x1 gen() 8111 MB/s [ 4.488003] raid6: sse2x1 xor() 5961 MB/s [ 4.536009] raid6: sse2x2 gen() 10068 MB/s [ 4.584006] raid6: sse2x2 xor() 6793 MB/s [ 4.632009] raid6: sse2x4 gen() 11660 MB/s [ 4.680008] raid6: sse2x4 xor() 7165 MB/s [ 4.728007] raid6: avx2x1 gen() 16219 MB/s [ 4.776005] raid6: avx2x1 xor() 11380 MB/s [ 4.824005] raid6: avx2x2 gen() 19682 MB/s [ 4.872004] raid6: avx2x2 xor() 12426 MB/s [ 4.920005] raid6: avx2x4 gen() 22544 MB/s [ 4.968005] raid6: avx2x4 xor() 13887 MB/s [ 4.968006] raid6: using algorithm avx2x4 gen() 22544 MB/s [ 4.968006] raid6: .... xor() 13887 MB/s, rmw enabled [ 4.968007] raid6: using avx2x2 recovery algorithm [ 4.968961] xor: automatically using best checksumming function avx [ 4.969831] async_tx: api initialized (async) [ 15.673220] NET: Registered protocol family 38 [ 15.877650] Btrfs loaded, crc32c=crc32c-intel [ 15.951616] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 16.088535] systemd[1]: Failed to insert module 'autofs4': No such file or directory [ 16.101868] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 16.120545] systemd[1]: Detected architecture x86-64. [ 16.123477] systemd[1]: Set hostname to . [ 16.159773] random: crng init done [ 16.159775] random: 7 urandom warning(s) missed due to ratelimiting [ 16.298761] systemd[1]: Listening on LVM2 metadata daemon socket. [ 16.298859] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 16.298934] systemd[1]: Listening on Journal Socket (/dev/log). [ 16.300036] systemd[1]: Created slice system-openvpn.slice. [ 16.300165] systemd[1]: Listening on Journal Audit Socket. [ 16.300521] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 16.300599] systemd[1]: Listening on RPCbind Server Activation Socket. [ 16.377590] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 16.412652] lp: driver loaded but no devices found [ 16.462244] ppdev: user-space parallel port driver [ 16.477151] systemd-journald[497]: Received request to flush runtime journal from PID 1 [ 16.498479] RPC: Registered named UNIX socket transport module. [ 16.498480] RPC: Registered udp transport module. [ 16.498481] RPC: Registered tcp transport module. [ 16.498482] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.537524] bpfilter: Loaded bpfilter_umh pid 542 [ 16.563845] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.404647] Adding 1048572k swap on /dev/mapper/crypt-swap. Priority:-2 extents:1 across:1048572k SSFS [ 17.703294] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.513157] Process accounting resumed [ 19.341227] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 19.373590] NFSD: starting 90-second grace period (net f00000a8) [ 19.408271] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 19.628213] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 22.542623] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 22.542680] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 23.392946] aufs 4.18-20180910 [ 23.808928] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 23.810616] Bridge firewalling registered [ 23.896765] Initializing XFRM netlink socket [ 23.973597] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 24.242533] aufs au_opts_verify:1609:dockerd[3010]: dirperm1 breaks the protection by the permission bits on the lower branch [ 28.990222] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:13:20:c7:ad:dc:08:00 SRC=54.71.109.77 DST=192.168.100.7 LEN=66 TOS=0x00 PREC=0x00 TTL=236 ID=25762 DF PROTO=UDP SPT=223 DPT=49744 LEN=46 [ 452.521544] usb 1-2.2: USB disconnect, device number 6 [ 452.575794] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 452.575812] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 452.586060] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 452.586078] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 453.122901] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56449 PROTO=UDP SPT=161 DPT=35790 LEN=158 [ 454.123573] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56450 PROTO=UDP SPT=161 DPT=35790 LEN=158 [ 521.863311] usb 1-2.2: new low-speed USB device number 10 using xhci_hcd [ 521.973336] usb 1-2.2: New USB device found, idVendor=04ca, idProduct=005b, bcdDevice= 1.17 [ 521.973346] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 521.973353] usb 1-2.2: Product: Goldtouch USB Keyboard [ 521.973359] usb 1-2.2: Manufacturer: Lite-On Technology Corp. [ 521.985450] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:04CA:005B.000A/input/input11 [ 522.044273] hid-generic 0003:04CA:005B.000A: input,hidraw7: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:14.0-2.2/input0 [ 522.049718] input: Lite-On Technology Corp. Goldtouch USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:04CA:005B.000B/input/input12 [ 522.107771] input: Lite-On Technology Corp. Goldtouch USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:04CA:005B.000B/input/input13 [ 522.108305] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:04CA:005B.000B/input/input14 [ 522.109073] hid-generic 0003:04CA:005B.000B: input,hiddev2,hidraw8: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:14.0-2.2/input1 [ 522.241354] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 522.241380] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 522.251535] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 522.251551] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 522.790231] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56451 PROTO=UDP SPT=161 DPT=57591 LEN=158 [ 523.790418] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56452 PROTO=UDP SPT=161 DPT=57591 LEN=158 [ 568.233557] usb 1-2.2: USB disconnect, device number 10 [ 568.413579] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 568.413596] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 568.423739] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 568.423753] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 569.002998] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56453 PROTO=UDP SPT=161 DPT=39210 LEN=158 [ 570.003061] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56454 PROTO=UDP SPT=161 DPT=39210 LEN=158 [ 574.599841] usb 1-4: USB disconnect, device number 5 [ 576.493714] usb 1-4: new low-speed USB device number 11 using xhci_hcd [ 576.650940] usb 1-4: New USB device found, idVendor=04ca, idProduct=005b, bcdDevice= 1.17 [ 576.650950] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 576.650957] usb 1-4: Product: Goldtouch USB Keyboard [ 576.650963] usb 1-4: Manufacturer: Lite-On Technology Corp. [ 576.657650] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04CA:005B.000C/input/input15 [ 576.718602] hid-generic 0003:04CA:005B.000C: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:14.0-4/input0 [ 576.724164] input: Lite-On Technology Corp. Goldtouch USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04CA:005B.000D/input/input16 [ 576.782132] input: Lite-On Technology Corp. Goldtouch USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04CA:005B.000D/input/input17 [ 576.782661] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04CA:005B.000D/input/input18 [ 576.783179] hid-generic 0003:04CA:005B.000D: input,hiddev2,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:14.0-4/input1 [ 576.879278] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 576.879300] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 576.889466] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 576.889485] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 577.427465] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56455 PROTO=UDP SPT=161 DPT=47196 LEN=158 [ 578.427537] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=56456 PROTO=UDP SPT=161 DPT=47196 LEN=158 [ 691.108101] SGI XFS with ACLs, security attributes, realtime, no debug enabled [36528.157947] perf: interrupt took too long (2545 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 [60983.231604] perf: interrupt took too long (3209 > 3181), lowering kernel.perf_event_max_sample_rate to 62250 [90717.731401] perf: interrupt took too long (4058 > 4011), lowering kernel.perf_event_max_sample_rate to 49250 [101472.019139] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [137382.236302] perf: interrupt took too long (5109 > 5072), lowering kernel.perf_event_max_sample_rate to 39000 [180180.448764] usb 1-2: USB disconnect, device number 2 [180180.448773] usb 1-2.1: USB disconnect, device number 4 [180180.450142] usb 1-2.3: USB disconnect, device number 8 [180180.506974] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [180180.506990] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [180180.517246] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [180180.517296] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [180180.527726] usb 1-2.4: USB disconnect, device number 9 [180180.614918] usb 2-2: USB disconnect, device number 2 [180181.061814] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=58796 PROTO=UDP SPT=161 DPT=36294 LEN=158 [180182.048813] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=58797 PROTO=UDP SPT=161 DPT=36294 LEN=158 [180975.848843] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [180981.210468] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [181253.955976] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [181256.311883] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [181264.171086] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [208036.890257] perf: interrupt took too long (6426 > 6386), lowering kernel.perf_event_max_sample_rate to 31000 [218273.867506] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [218273.900041] usb 2-2: New USB device found, idVendor=0bda, idProduct=0401, bcdDevice= 1.29 [218273.900050] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [218273.900056] usb 2-2: Product: 4-Port USB 3.0 Hub [218273.900061] usb 2-2: Manufacturer: Generic [218273.909569] hub 2-2:1.0: USB hub found [218273.911023] hub 2-2:1.0: 4 ports detected [218273.972939] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [218273.972955] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [218273.983074] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [218273.983088] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [218274.018638] usb 1-2: new high-speed USB device number 12 using xhci_hcd [218274.173596] usb 1-2: New USB device found, idVendor=0bda, idProduct=5401, bcdDevice= 1.29 [218274.173601] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [218274.173616] usb 1-2: Product: 4-Port USB 2.0 Hub [218274.173618] usb 1-2: Manufacturer: Generic [218274.174410] hub 1-2:1.0: USB hub found [218274.175284] hub 1-2:1.0: 4 ports detected [218274.466570] usb 1-2.1: new high-speed USB device number 13 using xhci_hcd [218274.516308] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=59302 PROTO=UDP SPT=161 DPT=35902 LEN=158 [218274.567191] usb 1-2.1: New USB device found, idVendor=04f9, idProduct=0042, bcdDevice= 1.00 [218274.567194] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [218274.567195] usb 1-2.1: Product: HL-2270DW series [218274.567197] usb 1-2.1: Manufacturer: Brother [218274.567198] usb 1-2.1: SerialNumber: M0J491117 [218274.650617] usb 1-2.3: new full-speed USB device number 14 using xhci_hcd [218274.756328] usb 1-2.3: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 4.28 [218274.756331] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [218274.756333] usb 1-2.3: Product: Yubikey 4 OTP+U2F+CCID [218274.756334] usb 1-2.3: Manufacturer: Yubico [218274.771917] input: Yubico Yubikey 4 OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:1050:0407.000E/input/input19 [218274.830968] hid-generic 0003:1050:0407.000E: input,hidraw3: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-2.3/input0 [218274.831638] hid-generic 0003:1050:0407.000F: hiddev0,hidraw4: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F+CCID] on usb-0000:00:14.0-2.3/input1 [218274.910597] usb 1-2.4: new full-speed USB device number 15 using xhci_hcd [218275.021321] usb 1-2.4: New USB device found, idVendor=1050, idProduct=0403, bcdDevice= 4.18 [218275.021328] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [218275.021332] usb 1-2.4: Product: Yubikey 4 OTP+U2F [218275.021336] usb 1-2.4: Manufacturer: Yubico [218275.031837] input: Yubico Yubikey 4 OTP+U2F as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:1050:0403.0010/input/input20 [218275.091334] hid-generic 0003:1050:0403.0010: input,hidraw5: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+U2F] on usb-0000:00:14.0-2.4/input0 [218275.092288] hid-generic 0003:1050:0403.0011: hiddev1,hidraw6: USB HID v1.10 Device [Yubico Yubikey 4 OTP+U2F] on usb-0000:00:14.0-2.4/input1 [218275.515708] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=59303 PROTO=UDP SPT=161 DPT=35902 LEN=158 [218297.274077] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [218298.549987] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [218306.427326] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [218336.181368] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [218344.125634] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [218345.961587] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:fb:d8:c7:71:82:36:c6:08:00 SRC=192.168.100.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [227456.625821] usb 1-2: USB disconnect, device number 12 [227456.625830] usb 1-2.1: USB disconnect, device number 13 [227456.627193] usb 1-2.3: USB disconnect, device number 14 [227456.679856] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [227456.679879] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [227456.693963] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [227456.693990] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [227456.713061] usb 1-2.4: USB disconnect, device number 15 [227456.736228] usb 2-2: USB disconnect, device number 3 [227457.251734] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=59420 PROTO=UDP SPT=161 DPT=55090 LEN=158 [227458.251279] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=59421 PROTO=UDP SPT=161 DPT=55090 LEN=158 [314469.002147] perf: interrupt took too long (8039 > 8032), lowering kernel.perf_event_max_sample_rate to 24750 [325158.622121] usb 1-1: new high-speed USB device number 16 using xhci_hcd [325158.771759] usb 1-1: New USB device found, idVendor=12d1, idProduct=107e, bcdDevice= 2.99 [325158.771773] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [325158.771779] usb 1-1: Product: MHA-L29 [325158.771785] usb 1-1: Manufacturer: HUAWEI [325158.771791] usb 1-1: SerialNumber: 5RE0217830000399 [325158.842744] usb-storage 1-1:1.1: USB Mass Storage device detected [325158.843202] scsi host3: usb-storage 1-1:1.1 [325158.844090] usbcore: registered new interface driver usb-storage [325158.846141] usbcore: registered new interface driver uas [325158.877611] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [325158.877628] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [325158.887802] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=850591 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [325158.887817] [UFW BLOCK] IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:baae:edff:feea:3cbd DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=224372 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [325159.445279] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=60685 PROTO=UDP SPT=161 DPT=52656 LEN=158 [325159.863111] scsi 3:0:0:0: CD-ROM Linux File-CD Gadget 0404 PQ: 0 ANSI: 2 [325159.864205] sr 3:0:0:0: Power-on or device reset occurred [325159.867644] sr 3:0:0:0: [sr0] scsi-1 drive [325159.867649] cdrom: Uniform CD-ROM driver Revision: 3.20 [325159.869538] sr 3:0:0:0: Attached scsi CD-ROM sr0 [325159.869951] sr 3:0:0:0: Attached scsi generic sg1 type 5 [325160.445057] [UFW BLOCK] IN=eno1 OUT= MAC=b8:ae:ed:ea:3c:bd:00:1b:a9:67:16:ea:08:00 SRC=192.168.100.100 DST=192.168.100.7 LEN=178 TOS=0x00 PREC=0x00 TTL=64 ID=60686 PROTO=UDP SPT=161 DPT=52656 LEN=158