[ 0.000000] Linux version 4.18.0-12-generic (buildd@lgw01-amd64-033) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #13-Ubuntu SMP Wed Nov 14 15:17:05 UTC 2018 (Ubuntu 4.18.0-12.13-generic 4.18.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-12-generic root=UUID=052c09a3-429e-445b-9312-c949176e9e74 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009bfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d5efdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d5efe000-0x00000000d5f18fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d5f19000-0x00000000da84ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da850000-0x00000000da967fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da968000-0x00000000da971fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da972000-0x00000000daa78fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daa79000-0x00000000dae30fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dae31000-0x00000000db871fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db872000-0x00000000db912fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000db913000-0x00000000ddffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.60 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xd5efe000 ACPI=0xd5efe000 SMBIOS=0xdb7e0000 SMBIOS 3.0=0xdb7df000 ESRT=0xd81d8b98 MEMATTR=0xd8234698 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4023 08/20/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xde000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000d81d8b98 to 0x00000000d81d8bd0. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x4455c000, 0x4455cfff] PGTABLE [ 0.000000] BRK [0x4455d000, 0x4455dfff] PGTABLE [ 0.000000] BRK [0x4455e000, 0x4455efff] PGTABLE [ 0.000000] BRK [0x4455f000, 0x4455ffff] PGTABLE [ 0.000000] BRK [0x44560000, 0x44560fff] PGTABLE [ 0.000000] BRK [0x44561000, 0x44561fff] PGTABLE [ 0.000000] BRK [0x44562000, 0x44562fff] PGTABLE [ 0.000000] BRK [0x44563000, 0x44563fff] PGTABLE [ 0.000000] BRK [0x44564000, 0x44564fff] PGTABLE [ 0.000000] BRK [0x44565000, 0x44565fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x30f97000-0x347c2fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000D5EFE000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000D5EFE098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D5F08AD8 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624) [ 0.000000] ACPI: DSDT 0x00000000D5EFE1E0 00A8F3 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DAE19E00 000040 [ 0.000000] ACPI: APIC 0x00000000D5F08BF0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D5F08CD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000D5F08D18 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000D5F16558 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000D5F08E10 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 0.000000] ACPI: SSDT 0x00000000D5F11AA8 00119C (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000D5F12C48 000850 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000D5F13498 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000D5F134C8 002DA8 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000D5F16270 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000D5F162B0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000D5F162E8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000D5F16310 000042 (v01 00000000 00000000) [ 0.000000] ACPI: BGRT 0x00000000D5F16358 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: IVRS 0x00000000D5F16390 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000D5F16460 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff] [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009bfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000d5efdfff] [ 0.000000] node 0: [mem 0x00000000d5f19000-0x00000000da84ffff] [ 0.000000] node 0: [mem 0x00000000da972000-0x00000000daa78fff] [ 0.000000] node 0: [mem 0x00000000db913000-0x00000000ddffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff] [ 0.000000] Reserved but unavailable: 13410 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff] [ 0.000000] On node 0 totalpages: 4177694 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14064 pages used for memmap [ 0.000000] DMA32 zone: 900095 pages, LIFO batch:31 [ 0.000000] Normal zone: 51150 pages used for memmap [ 0.000000] Normal zone: 3273600 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff] [ 0.000000] PM: Registered nosave memory: [mem 0x09c00000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd5efe000-0xd5f18fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda850000-0xda967fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda968000-0xda971fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaa79000-0xdae30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae31000-0xdb871fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb872000-0xdb912fff] [ 0.000000] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4112389 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-12-generic root=UUID=052c09a3-429e-445b-9312-c949176e9e74 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16206476K/16710776K available (12300K kernel code, 2633K rwdata, 4352K rodata, 2440K init, 2336K bss, 504300K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] ftrace: allocating 40813 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] Switched APIC routing to physical flat. [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration failed [ 0.028000] tsc: PIT calibration matches HPET. 1 loops [ 0.028000] tsc: Detected 3193.805 MHz processor [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e096da10e4, max_idle_ns: 440795287066 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.61 BogoMIPS (lpj=12775220) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.034236] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.035510] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.035572] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.035612] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.035844] mce: CPU supports 23 MCE banks [ 0.035864] LVT offset 1 assigned for vector 0xf9 [ 0.035935] LVT offset 2 assigned for vector 0xf4 [ 0.035947] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.035947] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.035949] Spectre V2 : Mitigation: Full AMD retpoline [ 0.035949] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.035950] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.035951] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.042646] Freeing SMP alternatives memory: 36K [ 0.048000] smpboot: CPU0: AMD Ryzen 5 1400 Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1) [ 0.048000] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.048000] ... version: 0 [ 0.048000] ... bit width: 48 [ 0.048000] ... generic registers: 6 [ 0.048000] ... value mask: 0000ffffffffffff [ 0.048000] ... max period: 00007fffffffffff [ 0.048000] ... fixed-purpose events: 0 [ 0.048000] ... event mask: 000000000000003f [ 0.048000] Hierarchical SRCU implementation. [ 0.048000] smp: Bringing up secondary CPUs ... [ 0.048000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.048000] x86: Booting SMP configuration: [ 0.048000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.060054] smp: Brought up 1 node, 8 CPUs [ 0.060054] smpboot: Max logical packages: 2 [ 0.060054] smpboot: Total of 8 processors activated (51100.88 BogoMIPS) [ 0.060720] devtmpfs: initialized [ 0.060720] x86/mm: Memory block size: 128MB [ 0.061040] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) [ 0.061040] PM: Registering ACPI NVS region [mem 0xdaa79000-0xdae30fff] (3899392 bytes) [ 0.061040] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.061040] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.061040] pinctrl core: initialized pinctrl subsystem [ 0.061040] RTC time: 18:51:47, date: 12/19/18 [ 0.061040] NET: Registered protocol family 16 [ 0.061040] audit: initializing netlink subsys (disabled) [ 0.061040] audit: type=2000 audit(1545245507.060:1): state=initialized audit_enabled=0 res=1 [ 0.064040] cpuidle: using governor ladder [ 0.064040] cpuidle: using governor menu [ 0.064040] ACPI: bus type PCI registered [ 0.064040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.064095] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.064098] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.064105] PCI: Using configuration type 1 for base access [ 0.065105] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.065105] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.065105] ACPI: Added _OSI(Module Device) [ 0.065105] ACPI: Added _OSI(Processor Device) [ 0.065105] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.065105] ACPI: Added _OSI(Processor Aggregator Device) [ 0.065105] ACPI: Added _OSI(Linux-Dell-Video) [ 0.065105] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.076840] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.079643] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.083548] ACPI: Interpreter enabled [ 0.083564] ACPI: (supports S0 S3 S4 S5) [ 0.083565] ACPI: Using IOAPIC for interrupt routing [ 0.083919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.084251] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.096569] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.096574] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.096783] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR] [ 0.096981] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.096993] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.097325] PCI host bridge to bus 0000:00 [ 0.097327] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.097328] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.097329] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.097330] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.097331] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.097332] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.097333] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.097335] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.097341] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.097427] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.097529] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.097605] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ 0.097714] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.097814] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.097900] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.097973] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.098409] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.098534] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.098632] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.098706] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.098733] pci 0000:00:07.1: enabling Extended Tags [ 0.098804] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.098903] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.098977] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.099356] pci 0000:00:08.1: enabling Extended Tags [ 0.099432] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.099565] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.099788] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.100013] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.100075] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.100136] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.100201] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.100270] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.100338] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.100406] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.100474] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.100641] pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330 [ 0.100663] pci 0000:01:00.0: reg 0x10: [mem 0xf76a0000-0xf76a7fff 64bit] [ 0.100735] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.100802] pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601 [ 0.100847] pci 0000:01:00.1: reg 0x24: [mem 0xf7680000-0xf769ffff] [ 0.100854] pci 0000:01:00.1: reg 0x30: [mem 0xf7600000-0xf767ffff pref] [ 0.100891] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 0.100942] pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400 [ 0.101012] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 0.101095] pci 0000:00:01.3: PCI bridge to [bus 01-06] [ 0.101098] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.101099] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff] [ 0.101193] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400 [ 0.101276] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.101350] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400 [ 0.101433] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 0.101508] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400 [ 0.101591] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 0.101677] pci 0000:01:00.2: PCI bridge to [bus 02-06] [ 0.101682] pci 0000:01:00.2: bridge window [io 0xf000-0xffff] [ 0.101684] pci 0000:01:00.2: bridge window [mem 0xf7500000-0xf75fffff] [ 0.101749] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.101790] pci 0000:03:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.101826] pci 0000:03:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit] [ 0.101848] pci 0000:03:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit] [ 0.101974] pci 0000:03:00.0: supports D1 D2 [ 0.101975] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102139] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.102143] pci 0000:02:00.0: bridge window [io 0xf000-0xffff] [ 0.102146] pci 0000:02:00.0: bridge window [mem 0xf7500000-0xf75fffff] [ 0.102213] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400 [ 0.102393] pci 0000:04:00.0: supports D1 D2 [ 0.102394] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.112025] pci 0000:02:01.0: PCI bridge to [bus 04-05] [ 0.112100] pci_bus 0000:05: extended config space not accessible [ 0.112219] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.112296] pci 0000:02:04.0: PCI bridge to [bus 06] [ 0.112400] pci 0000:07:00.0: [10de:0f02] type 00 class 0x030000 [ 0.112424] pci 0000:07:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.112437] pci 0000:07:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.112449] pci 0000:07:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.112456] pci 0000:07:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.112464] pci 0000:07:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.112477] pci 0000:07:00.0: BAR 3: assigned to efifb [ 0.112593] pci 0000:07:00.1: [10de:0bea] type 00 class 0x040300 [ 0.112611] pci 0000:07:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.112751] pci 0000:00:03.1: ASPM: current common clock configuration is broken, reconfiguring [ 0.124027] pci 0000:00:03.1: PCI bridge to [bus 07] [ 0.124031] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.124034] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] [ 0.124038] pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.124316] pci 0000:08:00.0: [1022:145a] type 00 class 0x130000 [ 0.124343] pci 0000:08:00.0: enabling Extended Tags [ 0.124419] pci 0000:08:00.2: [1022:1456] type 00 class 0x108000 [ 0.124433] pci 0000:08:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff] [ 0.124441] pci 0000:08:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff] [ 0.124446] pci 0000:08:00.2: enabling Extended Tags [ 0.124515] pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330 [ 0.124528] pci 0000:08:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit] [ 0.124547] pci 0000:08:00.3: enabling Extended Tags [ 0.124572] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold [ 0.124629] pci 0000:00:07.1: PCI bridge to [bus 08] [ 0.124633] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff] [ 0.124702] pci 0000:09:00.0: [1022:1455] type 00 class 0x130000 [ 0.124729] pci 0000:09:00.0: enabling Extended Tags [ 0.124794] pci 0000:09:00.2: [1022:7901] type 00 class 0x010601 [ 0.124822] pci 0000:09:00.2: reg 0x24: [mem 0xf7708000-0xf7708fff] [ 0.124829] pci 0000:09:00.2: enabling Extended Tags [ 0.124857] pci 0000:09:00.2: PME# supported from D3hot D3cold [ 0.124905] pci 0000:09:00.3: [1022:1457] type 00 class 0x040300 [ 0.124915] pci 0000:09:00.3: reg 0x10: [mem 0xf7700000-0xf7707fff] [ 0.124933] pci 0000:09:00.3: enabling Extended Tags [ 0.124960] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 0.125019] pci 0000:00:08.1: PCI bridge to [bus 09] [ 0.125023] pci 0000:00:08.1: bridge window [mem 0xf7700000-0xf77fffff] [ 0.125438] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125510] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125566] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125632] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125690] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125739] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125791] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.125843] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.126593] SCSI subsystem initialized [ 0.128016] libata version 3.00 loaded. [ 0.128023] pci 0000:07:00.0: vgaarb: setting as boot VGA device [ 0.128023] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.128023] pci 0000:07:00.0: vgaarb: bridge control possible [ 0.128023] vgaarb: loaded [ 0.128033] ACPI: bus type USB registered [ 0.128045] usbcore: registered new interface driver usbfs [ 0.128051] usbcore: registered new interface driver hub [ 0.128078] usbcore: registered new device driver usb [ 0.128094] pps_core: LinuxPPS API ver. 1 registered [ 0.128094] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.128096] PTP clock support registered [ 0.128115] EDAC MC: Ver: 3.0.0 [ 0.128115] Registered efivars operations [ 0.147187] PCI: Using ACPI for IRQ routing [ 0.151522] PCI: pci_cache_line_size set to 64 bytes [ 0.151583] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff] [ 0.151584] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.151584] e820: reserve RAM buffer [mem 0xd5efe000-0xd7ffffff] [ 0.151585] e820: reserve RAM buffer [mem 0xda850000-0xdbffffff] [ 0.151586] e820: reserve RAM buffer [mem 0xdaa79000-0xdbffffff] [ 0.151586] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff] [ 0.151587] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] [ 0.151671] NetLabel: Initializing [ 0.151671] NetLabel: domain hash size = 128 [ 0.151672] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.151682] NetLabel: unlabeled traffic allowed by default [ 0.151695] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.151695] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.153138] clocksource: Switched to clocksource tsc-early [ 0.162064] VFS: Disk quotas dquot_6.6.0 [ 0.162082] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.162190] AppArmor: AppArmor Filesystem Enabled [ 0.162220] pnp: PnP ACPI init [ 0.162392] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.162397] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.162471] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 0.162474] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.162561] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.162743] system 00:03: [io 0x0300-0x030f] has been reserved [ 0.162745] system 00:03: [io 0x0230-0x023f] has been reserved [ 0.162746] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.162749] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.162792] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.163080] pnp 00:05: [dma 0 disabled] [ 0.163117] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.163360] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.163361] system 00:06: [io 0x040b] has been reserved [ 0.163362] system 00:06: [io 0x04d6] has been reserved [ 0.163363] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.163365] system 00:06: [io 0x0c14] has been reserved [ 0.163366] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.163367] system 00:06: [io 0x0c52] has been reserved [ 0.163368] system 00:06: [io 0x0c6c] has been reserved [ 0.163369] system 00:06: [io 0x0c6f] has been reserved [ 0.163370] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 0.163371] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 0.163372] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.163373] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.163374] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.163375] system 00:06: [io 0x0800-0x089f] has been reserved [ 0.163376] system 00:06: [io 0x0b00-0x0b0f] has been reserved [ 0.163377] system 00:06: [io 0x0b20-0x0b3f] has been reserved [ 0.163378] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.163379] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.163381] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.163382] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.163383] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.163384] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.163386] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.163387] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.163388] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.163391] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.163944] pnp: PnP ACPI: found 7 devices [ 0.169803] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.169866] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.169869] pci 0000:02:00.0: bridge window [io 0xf000-0xffff] [ 0.169873] pci 0000:02:00.0: bridge window [mem 0xf7500000-0xf75fffff] [ 0.169880] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.169903] pci 0000:02:01.0: PCI bridge to [bus 04-05] [ 0.169912] pci 0000:02:04.0: PCI bridge to [bus 06] [ 0.169921] pci 0000:01:00.2: PCI bridge to [bus 02-06] [ 0.169923] pci 0000:01:00.2: bridge window [io 0xf000-0xffff] [ 0.169927] pci 0000:01:00.2: bridge window [mem 0xf7500000-0xf75fffff] [ 0.169932] pci 0000:00:01.3: PCI bridge to [bus 01-06] [ 0.169934] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.169936] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff] [ 0.169940] pci 0000:00:03.1: PCI bridge to [bus 07] [ 0.169941] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.169944] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] [ 0.169946] pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.169950] pci 0000:00:07.1: PCI bridge to [bus 08] [ 0.169952] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff] [ 0.169956] pci 0000:00:08.1: PCI bridge to [bus 09] [ 0.169958] pci 0000:00:08.1: bridge window [mem 0xf7700000-0xf77fffff] [ 0.169962] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.169964] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.169964] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.169965] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.169967] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.169968] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.169969] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xf7ffffff window] [ 0.169970] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.169971] pci_bus 0000:01: resource 1 [mem 0xf7500000-0xf76fffff] [ 0.169972] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.169972] pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf75fffff] [ 0.169974] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.169975] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff] [ 0.169976] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.169977] pci_bus 0000:07: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.169978] pci_bus 0000:07: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.169979] pci_bus 0000:08: resource 1 [mem 0xf7200000-0xf74fffff] [ 0.169980] pci_bus 0000:09: resource 1 [mem 0xf7700000-0xf77fffff] [ 0.170065] NET: Registered protocol family 2 [ 0.170232] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.170273] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.170442] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.170560] TCP: Hash tables configured (established 131072 bind 65536) [ 0.170602] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.170638] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.170727] NET: Registered protocol family 1 [ 0.170734] NET: Registered protocol family 44 [ 0.170922] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.170928] pci 0000:07:00.1: Linked as a consumer to 0000:07:00.0 [ 0.171085] PCI: CLS 64 bytes, default 64 [ 0.171121] Unpacking initramfs... [ 0.863585] Freeing initrd memory: 57520K [ 0.863633] AMD-Vi: IOMMU performance counters supported [ 0.863940] iommu: Adding device 0000:00:01.0 to group 0 [ 0.864061] iommu: Adding device 0000:00:01.3 to group 1 [ 0.864192] iommu: Adding device 0000:00:02.0 to group 2 [ 0.864311] iommu: Adding device 0000:00:03.0 to group 3 [ 0.864442] iommu: Adding device 0000:00:03.1 to group 4 [ 0.864557] iommu: Adding device 0000:00:04.0 to group 5 [ 0.864684] iommu: Adding device 0000:00:07.0 to group 6 [ 0.864798] iommu: Adding device 0000:00:07.1 to group 7 [ 0.864925] iommu: Adding device 0000:00:08.0 to group 8 [ 0.865045] iommu: Adding device 0000:00:08.1 to group 9 [ 0.865168] iommu: Adding device 0000:00:14.0 to group 10 [ 0.865183] iommu: Adding device 0000:00:14.3 to group 10 [ 0.865336] iommu: Adding device 0000:00:18.0 to group 11 [ 0.865352] iommu: Adding device 0000:00:18.1 to group 11 [ 0.865366] iommu: Adding device 0000:00:18.2 to group 11 [ 0.865380] iommu: Adding device 0000:00:18.3 to group 11 [ 0.865393] iommu: Adding device 0000:00:18.4 to group 11 [ 0.865407] iommu: Adding device 0000:00:18.5 to group 11 [ 0.865421] iommu: Adding device 0000:00:18.6 to group 11 [ 0.865436] iommu: Adding device 0000:00:18.7 to group 11 [ 0.865567] iommu: Adding device 0000:01:00.0 to group 12 [ 0.865588] iommu: Adding device 0000:01:00.1 to group 12 [ 0.865609] iommu: Adding device 0000:01:00.2 to group 12 [ 0.865621] iommu: Adding device 0000:02:00.0 to group 12 [ 0.865633] iommu: Adding device 0000:02:01.0 to group 12 [ 0.865646] iommu: Adding device 0000:02:04.0 to group 12 [ 0.865666] iommu: Adding device 0000:03:00.0 to group 12 [ 0.865679] iommu: Adding device 0000:04:00.0 to group 12 [ 0.865816] iommu: Adding device 0000:07:00.0 to group 13 [ 0.865839] iommu: Adding device 0000:07:00.1 to group 13 [ 0.865968] iommu: Adding device 0000:08:00.0 to group 14 [ 0.866092] iommu: Adding device 0000:08:00.2 to group 15 [ 0.866207] iommu: Adding device 0000:08:00.3 to group 16 [ 0.866340] iommu: Adding device 0000:09:00.0 to group 17 [ 0.866458] iommu: Adding device 0000:09:00.2 to group 18 [ 0.866588] iommu: Adding device 0000:09:00.3 to group 19 [ 0.866890] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.866891] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.866892] PPR NX GT IA GA PC GA_vAPIC [ 0.866894] AMD-Vi: Interrupt remapping enabled [ 0.866895] AMD-Vi: virtual APIC enabled [ 0.867010] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.867847] amd_uncore: AMD NB counters detected [ 0.867851] amd_uncore: AMD LLC counters detected [ 0.867992] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.868040] Scanning for low memory corruption every 60 seconds [ 0.868677] Initialise system trusted keyrings [ 0.868692] Key type blacklist registered [ 0.868723] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.869717] zbud: loaded [ 0.870148] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.870359] fuse init (API version 7.27) [ 0.870412] pstore: using deflate compression [ 0.871807] Key type asymmetric registered [ 0.871809] Asymmetric key parser 'x509' registered [ 0.871831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.871876] io scheduler noop registered [ 0.871877] io scheduler deadline registered [ 0.871899] io scheduler cfq registered (default) [ 0.873760] pcieport 0000:00:01.3: AER enabled with IRQ 26 [ 0.873780] pcieport 0000:00:03.1: AER enabled with IRQ 27 [ 0.873801] pcieport 0000:00:07.1: AER enabled with IRQ 28 [ 0.873816] pcieport 0000:00:08.1: AER enabled with IRQ 30 [ 0.873847] shpchp 0000:04:00.0: Cannot get control of SHPC hotplug [ 0.873853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.873891] efifb: probing for efifb [ 0.873901] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k [ 0.873902] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.873902] efifb: scrolling: redraw [ 0.873903] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.874101] Console: switching to colour frame buffer device 128x48 [ 0.874112] fb0: EFI VGA frame buffer device [ 0.874211] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.874219] ACPI: Power Button [PWRB] [ 0.874246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.874258] ACPI: Power Button [PWRF] [ 0.874297] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874369] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874441] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874505] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874570] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874641] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874724] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.874795] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 0.875021] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.895918] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.897299] Linux agpgart interface v0.103 [ 0.899380] loop: module loaded [ 0.899519] libphy: Fixed MDIO Bus: probed [ 0.899520] tun: Universal TUN/TAP device driver, 1.6 [ 0.899544] PPP generic driver version 2.4.2 [ 0.899576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.899579] ehci-pci: EHCI PCI platform driver [ 0.899587] ehci-platform: EHCI generic platform driver [ 0.899592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.899593] ohci-pci: OHCI PCI platform driver [ 0.899600] ohci-platform: OHCI generic platform driver [ 0.899604] uhci_hcd: USB Universal Host Controller Interface driver [ 0.899685] QUIRK: Enable AMD PLL fix [ 0.899702] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.899706] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.955051] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000418 [ 0.955215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.955217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.955218] usb usb1: Product: xHCI Host Controller [ 0.955219] usb usb1: Manufacturer: Linux 4.18.0-12-generic xhci-hcd [ 0.955220] usb usb1: SerialNumber: 0000:01:00.0 [ 0.955460] hub 1-0:1.0: USB hub found [ 0.955473] hub 1-0:1.0: 10 ports detected [ 0.961693] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.961695] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.961697] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed [ 0.961723] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.961738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 0.961739] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.961740] usb usb2: Product: xHCI Host Controller [ 0.961741] usb usb2: Manufacturer: Linux 4.18.0-12-generic xhci-hcd [ 0.961742] usb usb2: SerialNumber: 0000:01:00.0 [ 0.961946] hub 2-0:1.0: USB hub found [ 0.961954] hub 2-0:1.0: 4 ports detected [ 0.964460] xhci_hcd 0000:08:00.3: xHCI Host Controller [ 0.964464] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3 [ 0.964559] xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000418 [ 0.964661] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.964663] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.964664] usb usb3: Product: xHCI Host Controller [ 0.964664] usb usb3: Manufacturer: Linux 4.18.0-12-generic xhci-hcd [ 0.964665] usb usb3: SerialNumber: 0000:08:00.3 [ 0.964751] hub 3-0:1.0: USB hub found [ 0.964757] hub 3-0:1.0: 4 ports detected [ 0.964902] xhci_hcd 0000:08:00.3: xHCI Host Controller [ 0.964904] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4 [ 0.964906] xhci_hcd 0000:08:00.3: Host supports USB 3.0 SuperSpeed [ 0.964915] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.964928] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 0.964930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.964930] usb usb4: Product: xHCI Host Controller [ 0.964931] usb usb4: Manufacturer: Linux 4.18.0-12-generic xhci-hcd [ 0.964932] usb usb4: SerialNumber: 0000:08:00.3 [ 0.964996] hub 4-0:1.0: USB hub found [ 0.965001] hub 4-0:1.0: 4 ports detected [ 0.965145] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.965146] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.965303] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.965367] mousedev: PS/2 mouse device common for all mice [ 0.965480] rtc_cmos 00:02: RTC can wake from S4 [ 0.965726] rtc_cmos 00:02: registered as rtc0 [ 0.965740] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.965744] i2c /dev entries driver [ 0.965747] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 0.965796] device-mapper: uevent: version 1.0.3 [ 0.965839] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 0.965928] ledtrig-cpu: registered to indicate activity on CPUs [ 0.965932] EFI Variables Facility v0.08 2004-May-17 [ 0.985697] NET: Registered protocol family 10 [ 0.988567] Segment Routing with IPv6 [ 0.988588] NET: Registered protocol family 17 [ 0.988622] Key type dns_resolver registered [ 0.988969] RAS: Correctable Errors collector initialized. [ 0.989480] microcode: CPU0: patch_level=0x08001137 [ 0.989483] microcode: CPU1: patch_level=0x08001137 [ 0.989487] microcode: CPU2: patch_level=0x08001137 [ 0.989492] microcode: CPU3: patch_level=0x08001137 [ 0.989499] microcode: CPU4: patch_level=0x08001137 [ 0.989503] microcode: CPU5: patch_level=0x08001137 [ 0.989508] microcode: CPU6: patch_level=0x08001137 [ 0.989514] microcode: CPU7: patch_level=0x08001137 [ 0.989539] microcode: Microcode Update Driver: v2.2. [ 0.989548] sched_clock: Marking stable (989535103, 0)->(1068743379, -79208276) [ 0.989738] registered taskstats version 1 [ 0.989750] Loading compiled-in X.509 certificates [ 0.991637] Loaded X.509 cert 'Build time autogenerated kernel key: 8c855f97cca8f364c77b7335fddb33066f144219' [ 0.993853] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring [ 0.994005] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring [ 0.994023] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 0.994040] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 0.994191] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 0.995139] zswap: loaded using pool lzo/zbud [ 0.997808] Key type big_key registered [ 0.997811] Key type trusted registered [ 0.999048] Key type encrypted registered [ 0.999050] AppArmor: AppArmor sha1 policy hashing enabled [ 0.999054] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.999057] ima: Allocated hash algorithm: sha1 [ 0.999069] evm: Initialising EVM extended attributes: [ 0.999069] evm: security.selinux [ 0.999070] evm: security.SMACK64 [ 0.999070] evm: security.SMACK64EXEC [ 0.999070] evm: security.SMACK64TRANSMUTE [ 0.999071] evm: security.SMACK64MMAP [ 0.999071] evm: security.apparmor [ 0.999071] evm: security.ima [ 0.999071] evm: security.capability [ 0.999072] evm: HMAC attrs: 0x1 [ 0.999405] Magic number: 14:713:898 [ 0.999564] rtc_cmos 00:02: setting system clock to 2018-12-19 18:51:48 UTC (1545245508) [ 0.999765] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.008215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.276024] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.445135] Freeing unused kernel image memory: 2440K [ 1.464148] Write protecting the kernel read-only data: 20480k [ 1.465436] Freeing unused kernel image memory: 2008K [ 1.465731] Freeing unused kernel image memory: 1792K [ 1.475155] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.538698] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.540680] ahci 0000:01:00.1: version 3.0 [ 1.540871] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 1.540910] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 1.540912] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.542089] scsi host0: ahci [ 1.542994] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.542996] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.544321] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.544437] scsi host1: ahci [ 1.546563] scsi host2: ahci [ 1.546880] scsi host3: ahci [ 1.546969] scsi host4: ahci [ 1.547212] scsi host5: ahci [ 1.547282] scsi host6: ahci [ 1.548027] scsi host7: ahci [ 1.548073] ata1: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680100 irq 40 [ 1.548076] ata2: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680180 irq 40 [ 1.548077] ata3: DUMMY [ 1.548078] ata4: DUMMY [ 1.548080] ata5: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680300 irq 40 [ 1.548082] ata6: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680380 irq 40 [ 1.548083] ata7: DUMMY [ 1.548083] ata8: DUMMY [ 1.548303] ahci 0000:09:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.548305] ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.548468] scsi host8: ahci [ 1.548518] ata9: SATA max UDMA/133 abar m4096@0xf7708000 port 0xf7708100 irq 42 [ 1.557153] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 60:45:cb:64:42:ab, XID 54100800, IRQ 43 [ 1.557156] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.561894] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.573155] checking generic (f1000000 300000) vs hw (e8000000 8000000) [ 1.573156] checking generic (f1000000 300000) vs hw (f0000000 2000000) [ 1.573157] fb: switching to nouveaufb from EFI VGA [ 1.573175] Console: switching to colour dummy device 80x25 [ 1.573298] nouveau 0000:07:00.0: NVIDIA GF108 (0c1100a1) [ 1.602680] usb 1-3: New USB device found, idVendor=045e, idProduct=07b2, bcdDevice= 7.44 [ 1.602681] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.602683] usb 1-3: Product: Microsoft® Nano Transceiver v1.0 [ 1.602684] usb 1-3: Manufacturer: Microsoft [ 1.716929] hidraw: raw HID events driver (C) Jiri Kosina [ 1.723889] nouveau 0000:07:00.0: bios: version 70.08.d5.00.04 [ 1.724793] nouveau 0000:07:00.0: fb: 1024 MiB DDR3 [ 1.743608] usbcore: registered new interface driver usbhid [ 1.743609] usbhid: USB HID core driver [ 1.745076] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-3/1-3:1.0/0003:045E:07B2.0001/input/input3 [ 1.804210] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:01:00.0-3/input0 [ 1.804420] input: Microsoft Microsoft® Nano Transceiver v1.0 Mouse as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-3/1-3:1.1/0003:045E:07B2.0002/input/input4 [ 1.804497] input: Microsoft Microsoft® Nano Transceiver v1.0 Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-3/1-3:1.1/0003:045E:07B2.0002/input/input5 [ 1.804553] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:01:00.0-3/input1 [ 1.804856] input: Microsoft Microsoft® Nano Transceiver v1.0 Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-3/1-3:1.2/0003:045E:07B2.0003/input/input6 [ 1.864197] input: Microsoft Microsoft® Nano Transceiver v1.0 System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-3/1-3:1.2/0003:045E:07B2.0003/input/input8 [ 1.864294] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:01:00.0-3/input2 [ 1.866530] ata9: SATA link down (SStatus 0 SControl 300) [ 1.884030] tsc: Refined TSC clocksource calibration: 3194.000 MHz [ 1.884040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a25d85ab, max_idle_ns: 440795234405 ns [ 1.896093] clocksource: Switched to clocksource tsc [ 2.024027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.025049] ata1.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133 [ 2.025051] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.026991] ata1.00: configured for UDMA/133 [ 2.027334] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5 [ 2.027517] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.027584] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.027599] sd 0:0:0:0: [sda] Write Protect is off [ 2.027602] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.027629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.050662] sda: sda1 [ 2.050914] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.504028] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.504967] ata2.00: ATA-9: ST2000VX008-2E3164, CV12, max UDMA/133 [ 2.504968] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.506195] ata2.00: configured for UDMA/133 [ 2.506301] scsi 1:0:0:0: Direct-Access ATA ST2000VX008-2E31 CV12 PQ: 0 ANSI: 5 [ 2.506470] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.506482] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.506484] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.506498] sd 1:0:0:0: [sdb] Write Protect is off [ 2.506500] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.506525] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.553868] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 [ 2.554213] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.980034] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.981039] ata5.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133 [ 2.981040] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.982996] ata5.00: configured for UDMA/133 [ 2.983288] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5 [ 2.983449] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.983481] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.983496] sd 4:0:0:0: [sdc] Write Protect is off [ 2.983498] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.983533] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.996624] sdc: sdc1 [ 2.996853] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.052498] [TTM] Zone kernel: Available graphics memory: 8211628 kiB [ 3.052499] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.052500] [TTM] Initializing pool allocator [ 3.052503] [TTM] Initializing DMA pool allocator [ 3.052514] nouveau 0000:07:00.0: DRM: VRAM: 1024 MiB [ 3.052515] nouveau 0000:07:00.0: DRM: GART: 1048576 MiB [ 3.052518] nouveau 0000:07:00.0: DRM: TMDS table version 2.0 [ 3.052519] nouveau 0000:07:00.0: DRM: DCB version 4.0 [ 3.052520] nouveau 0000:07:00.0: DRM: DCB outp 00: 01000302 00020030 [ 3.052522] nouveau 0000:07:00.0: DRM: DCB outp 01: 02000300 00000000 [ 3.052523] nouveau 0000:07:00.0: DRM: DCB outp 02: 08011392 00020020 [ 3.052524] nouveau 0000:07:00.0: DRM: DCB outp 03: 04022310 00000000 [ 3.052525] nouveau 0000:07:00.0: DRM: DCB conn 00: 00001030 [ 3.052526] nouveau 0000:07:00.0: DRM: DCB conn 01: 00002161 [ 3.052527] nouveau 0000:07:00.0: DRM: DCB conn 02: 00000200 [ 3.058872] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.058872] [drm] Driver supports precise vblank timestamp query. [ 3.059821] nouveau 0000:07:00.0: DRM: MM: using COPY0 for buffer copies [ 3.148454] nouveau 0000:07:00.0: DRM: allocated 1600x1200 fb: 0x60000, bo (____ptrval____) [ 3.148512] fbcon: nouveaufb (fb0) is primary device [ 3.148548] Console: switching to colour frame buffer device 200x75 [ 3.148570] nouveau 0000:07:00.0: fb0: nouveaufb frame buffer device [ 3.164063] [drm] Initialized nouveau 1.3.1 20120801 for 0000:07:00.0 on minor 0 [ 3.456398] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.459159] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100 [ 3.463424] ata6.00: configured for UDMA/100 [ 3.575488] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5 [ 3.744582] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.744585] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.744737] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.744810] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 3.861789] md/raid1:md127: active with 2 out of 2 mirrors [ 3.861809] md127: detected capacity change from 0 to 499972374528 [ 3.878372] random: fast init done [ 4.045561] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.126477] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.193748] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.760009] raid6: sse2x1 gen() 6722 MB/s [ 4.808003] raid6: sse2x1 xor() 6713 MB/s [ 4.856007] raid6: sse2x2 gen() 14168 MB/s [ 4.904003] raid6: sse2x2 xor() 9096 MB/s [ 4.952004] raid6: sse2x4 gen() 14250 MB/s [ 5.000006] raid6: sse2x4 xor() 8156 MB/s [ 5.048007] raid6: avx2x1 gen() 15269 MB/s [ 5.096003] raid6: avx2x1 xor() 11978 MB/s [ 5.144005] raid6: avx2x2 gen() 19699 MB/s [ 5.192004] raid6: avx2x2 xor() 12671 MB/s [ 5.240004] raid6: avx2x4 gen() 20584 MB/s [ 5.288006] raid6: avx2x4 xor() 11255 MB/s [ 5.288007] raid6: using algorithm avx2x4 gen() 20584 MB/s [ 5.288007] raid6: .... xor() 11255 MB/s, rmw enabled [ 5.288007] raid6: using avx2x2 recovery algorithm [ 5.288887] xor: automatically using best checksumming function avx [ 5.289565] async_tx: api initialized (async) [ 5.514066] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 5.795734] random: crng init done [ 5.795737] random: 7 urandom warning(s) missed due to ratelimiting [ 7.111370] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.129377] systemd[1]: Detected architecture x86-64. [ 7.143929] systemd[1]: Set hostname to . [ 9.556752] systemd[1]: Listening on udev Control Socket. [ 9.557190] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.557252] systemd[1]: Listening on Syslog Socket. [ 9.557285] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.557383] systemd[1]: Listening on Journal Audit Socket. [ 9.559294] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 9.559308] systemd[1]: Reached target Remote File Systems. [ 9.861827] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 10.198461] systemd-journald[421]: Received request to flush runtime journal from PID 1 [ 10.301890] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 10.444618] lp: driver loaded but no devices found [ 10.511451] ppdev: user-space parallel port driver [ 13.745894] ccp 0000:08:00.2: enabling device (0000 -> 0002) [ 13.746262] ccp 0000:08:00.2: ccp enabled [ 13.746284] ccp 0000:08:00.2: psp initialization failed [ 13.746285] ccp 0000:08:00.2: enabled [ 13.912620] cryptd: max_cpu_qlen set to 1000 [ 14.087427] asus_wmi: ASUS WMI generic driver loaded [ 14.113481] asus_wmi: Initialization: 0x0 [ 14.113516] asus_wmi: BIOS WMI version: 0.9 [ 14.113641] asus_wmi: SFUN value: 0x0 [ 14.114120] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 14.114296] asus_wmi: Number of fans: 1 [ 14.223459] AVX2 version of gcm_enc/dec engaged. [ 14.223460] AES CTR mode by8 optimization enabled [ 14.766134] kvm: disabled by bios [ 14.889701] MCE: In-kernel MCE decoding enabled. [ 14.892987] EDAC amd64: Node 0: DRAM ECC disabled. [ 14.892988] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 15.354156] snd_hda_intel 0000:07:00.1: Disabling MSI [ 15.354163] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client [ 15.354263] snd_hda_intel 0000:09:00.3: enabling device (0000 -> 0002) [ 15.598454] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 15.598456] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.598457] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 15.598458] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 15.598459] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 15.598459] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 15.598461] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 15.598462] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 15.598463] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 15.610691] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input10 [ 15.610748] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input11 [ 15.610810] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input12 [ 15.610865] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input13 [ 15.610918] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input14 [ 16.988361] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input15 [ 16.988419] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input16 [ 16.988464] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input17 [ 16.988505] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input18 [ 18.246379] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 20.205037] audit: type=1400 audit(1545245527.704:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=933 comm="apparmor_parser" [ 20.205040] audit: type=1400 audit(1545245527.704:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=933 comm="apparmor_parser" [ 20.205042] audit: type=1400 audit(1545245527.704:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=933 comm="apparmor_parser" [ 20.258116] audit: type=1400 audit(1545245527.752:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=935 comm="apparmor_parser" [ 20.258208] audit: type=1400 audit(1545245527.752:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=937 comm="apparmor_parser" [ 20.258462] audit: type=1400 audit(1545245527.752:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=934 comm="apparmor_parser" [ 20.280075] audit: type=1400 audit(1545245527.776:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=938 comm="apparmor_parser" [ 20.280078] audit: type=1400 audit(1545245527.776:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=938 comm="apparmor_parser" [ 20.282009] audit: type=1400 audit(1545245527.776:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=948 comm="apparmor_parser" [ 20.282677] audit: type=1400 audit(1545245527.776:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=949 comm="apparmor_parser" [ 29.434237] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 29.926954] r8169 0000:03:00.0 enp3s0: link down [ 29.926966] r8169 0000:03:00.0 enp3s0: link down [ 29.927098] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 31.539893] r8169 0000:03:00.0 enp3s0: link up [ 31.539906] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 499.778362] ata1.00: exception Emask 0x11 SAct 0xf SErr 0x400000 action 0x6 frozen [ 499.778370] ata1.00: irq_stat 0x48000008, interface fatal error [ 499.778376] ata1: SError: { Handshk } [ 499.778381] ata1.00: failed command: WRITE FPDMA QUEUED [ 499.778392] ata1.00: cmd 61/40:00:38:28:18/05:00:1d:00:00/40 tag 0 ncq dma 688128 out res 40/00:1c:f8:37:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 499.778397] ata1.00: status: { DRDY } [ 499.778401] ata1.00: failed command: WRITE FPDMA QUEUED [ 499.778412] ata1.00: cmd 61/40:08:78:2d:18/05:00:1d:00:00/40 tag 1 ncq dma 688128 out res 40/00:1c:f8:37:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 499.778416] ata1.00: status: { DRDY } [ 499.778420] ata1.00: failed command: WRITE FPDMA QUEUED [ 499.778430] ata1.00: cmd 61/40:10:b8:32:18/05:00:1d:00:00/40 tag 2 ncq dma 688128 out res 40/00:1c:f8:37:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 499.778435] ata1.00: status: { DRDY } [ 499.778438] ata1.00: failed command: WRITE FPDMA QUEUED [ 499.778448] ata1.00: cmd 61/50:18:f8:37:18/00:00:1d:00:00/40 tag 3 ncq dma 40960 out res 40/00:1c:f8:37:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 499.778453] ata1.00: status: { DRDY } [ 499.778459] ata1: hard resetting link [ 499.778478] ata5.00: exception Emask 0x11 SAct 0xffffffff SErr 0x400000 action 0x6 frozen [ 499.778483] ata5.00: irq_stat 0x48000008, interface fatal error [ 499.778488] ata5: SError: { Handshk } [ 499.778492] ata5.00: failed command: READ FPDMA QUEUED [ 499.778501] ata5.00: cmd 60/08:00:a8:09:80/00:00:13:00:00/40 tag 0 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778504] ata5.00: status: { DRDY } [ 499.778507] ata5.00: failed command: READ FPDMA QUEUED [ 499.778515] ata5.00: cmd 60/08:08:b0:09:80/00:00:13:00:00/40 tag 1 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778519] ata5.00: status: { DRDY } [ 499.778522] ata5.00: failed command: READ FPDMA QUEUED [ 499.778530] ata5.00: cmd 60/08:10:b8:09:80/00:00:13:00:00/40 tag 2 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778534] ata5.00: status: { DRDY } [ 499.778537] ata5.00: failed command: READ FPDMA QUEUED [ 499.778545] ata5.00: cmd 60/08:18:c0:09:80/00:00:13:00:00/40 tag 3 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778548] ata5.00: status: { DRDY } [ 499.778551] ata5.00: failed command: READ FPDMA QUEUED [ 499.778559] ata5.00: cmd 60/08:20:c8:09:80/00:00:13:00:00/40 tag 4 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778563] ata5.00: status: { DRDY } [ 499.778566] ata5.00: failed command: READ FPDMA QUEUED [ 499.778574] ata5.00: cmd 60/08:28:d0:09:80/00:00:13:00:00/40 tag 5 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778577] ata5.00: status: { DRDY } [ 499.778580] ata5.00: failed command: READ FPDMA QUEUED [ 499.778588] ata5.00: cmd 60/08:30:e0:09:80/00:00:13:00:00/40 tag 6 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778592] ata5.00: status: { DRDY } [ 499.778595] ata5.00: failed command: READ FPDMA QUEUED [ 499.778603] ata5.00: cmd 60/08:38:e8:09:80/00:00:13:00:00/40 tag 7 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778606] ata5.00: status: { DRDY } [ 499.778609] ata5.00: failed command: READ FPDMA QUEUED [ 499.778617] ata5.00: cmd 60/08:40:f0:09:80/00:00:13:00:00/40 tag 8 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778621] ata5.00: status: { DRDY } [ 499.778624] ata5.00: failed command: READ FPDMA QUEUED [ 499.778632] ata5.00: cmd 60/08:48:f8:09:80/00:00:13:00:00/40 tag 9 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778635] ata5.00: status: { DRDY } [ 499.778638] ata5.00: failed command: WRITE FPDMA QUEUED [ 499.778647] ata5.00: cmd 61/40:50:38:28:18/05:00:1d:00:00/40 tag 10 ncq dma 688128 out res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778650] ata5.00: status: { DRDY } [ 499.778653] ata5.00: failed command: WRITE FPDMA QUEUED [ 499.778661] ata5.00: cmd 61/40:58:78:2d:18/05:00:1d:00:00/40 tag 11 ncq dma 688128 out res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778665] ata5.00: status: { DRDY } [ 499.778668] ata5.00: failed command: WRITE FPDMA QUEUED [ 499.778676] ata5.00: cmd 61/40:60:b8:32:18/05:00:1d:00:00/40 tag 12 ncq dma 688128 out res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778680] ata5.00: status: { DRDY } [ 499.778682] ata5.00: failed command: WRITE FPDMA QUEUED [ 499.778691] ata5.00: cmd 61/50:68:f8:37:18/00:00:1d:00:00/40 tag 13 ncq dma 40960 out res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778694] ata5.00: status: { DRDY } [ 499.778697] ata5.00: failed command: READ FPDMA QUEUED [ 499.778705] ata5.00: cmd 60/08:70:18:09:80/00:00:13:00:00/40 tag 14 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778709] ata5.00: status: { DRDY } [ 499.778712] ata5.00: failed command: READ FPDMA QUEUED [ 499.778720] ata5.00: cmd 60/08:78:20:09:80/00:00:13:00:00/40 tag 15 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778723] ata5.00: status: { DRDY } [ 499.778726] ata5.00: failed command: READ FPDMA QUEUED [ 499.778734] ata5.00: cmd 60/08:80:28:09:80/00:00:13:00:00/40 tag 16 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778738] ata5.00: status: { DRDY } [ 499.778741] ata5.00: failed command: READ FPDMA QUEUED [ 499.778749] ata5.00: cmd 60/08:88:30:09:80/00:00:13:00:00/40 tag 17 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778752] ata5.00: status: { DRDY } [ 499.778755] ata5.00: failed command: READ FPDMA QUEUED [ 499.778763] ata5.00: cmd 60/08:90:38:09:80/00:00:13:00:00/40 tag 18 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778767] ata5.00: status: { DRDY } [ 499.778770] ata5.00: failed command: READ FPDMA QUEUED [ 499.778778] ata5.00: cmd 60/08:98:40:09:80/00:00:13:00:00/40 tag 19 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778781] ata5.00: status: { DRDY } [ 499.778784] ata5.00: failed command: READ FPDMA QUEUED [ 499.778792] ata5.00: cmd 60/08:a0:48:09:80/00:00:13:00:00/40 tag 20 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778796] ata5.00: status: { DRDY } [ 499.778799] ata5.00: failed command: READ FPDMA QUEUED [ 499.778807] ata5.00: cmd 60/08:a8:50:09:80/00:00:13:00:00/40 tag 21 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778810] ata5.00: status: { DRDY } [ 499.778813] ata5.00: failed command: READ FPDMA QUEUED [ 499.778821] ata5.00: cmd 60/08:b0:58:09:80/00:00:13:00:00/40 tag 22 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778825] ata5.00: status: { DRDY } [ 499.778828] ata5.00: failed command: READ FPDMA QUEUED [ 499.778836] ata5.00: cmd 60/08:b8:60:09:80/00:00:13:00:00/40 tag 23 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778839] ata5.00: status: { DRDY } [ 499.778842] ata5.00: failed command: READ FPDMA QUEUED [ 499.778850] ata5.00: cmd 60/08:c0:68:09:80/00:00:13:00:00/40 tag 24 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778854] ata5.00: status: { DRDY } [ 499.778857] ata5.00: failed command: READ FPDMA QUEUED [ 499.778865] ata5.00: cmd 60/08:c8:70:09:80/00:00:13:00:00/40 tag 25 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778868] ata5.00: status: { DRDY } [ 499.778871] ata5.00: failed command: READ FPDMA QUEUED [ 499.778879] ata5.00: cmd 60/08:d0:78:09:80/00:00:13:00:00/40 tag 26 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778883] ata5.00: status: { DRDY } [ 499.778886] ata5.00: failed command: READ FPDMA QUEUED [ 499.778894] ata5.00: cmd 60/08:d8:80:09:80/00:00:13:00:00/40 tag 27 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778897] ata5.00: status: { DRDY } [ 499.778900] ata5.00: failed command: READ FPDMA QUEUED [ 499.778909] ata5.00: cmd 60/08:e0:88:09:80/00:00:13:00:00/40 tag 28 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778912] ata5.00: status: { DRDY } [ 499.778915] ata5.00: failed command: READ FPDMA QUEUED [ 499.778923] ata5.00: cmd 60/08:e8:90:09:80/00:00:13:00:00/40 tag 29 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778927] ata5.00: status: { DRDY } [ 499.778929] ata5.00: failed command: READ FPDMA QUEUED [ 499.778938] ata5.00: cmd 60/08:f0:98:09:80/00:00:13:00:00/40 tag 30 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778941] ata5.00: status: { DRDY } [ 499.778944] ata5.00: failed command: READ FPDMA QUEUED [ 499.778952] ata5.00: cmd 60/08:f8:a0:09:80/00:00:13:00:00/40 tag 31 ncq dma 4096 in res 40/00:4c:f8:09:80/00:00:13:00:00/40 Emask 0x10 (ATA bus error) [ 499.778956] ata5.00: status: { DRDY } [ 499.778959] ata5: hard resetting link [ 500.254366] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.254395] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.257565] ata1.00: configured for UDMA/133 [ 500.257618] ata5.00: configured for UDMA/133 [ 500.257624] ata1: EH complete [ 500.257765] ata5: EH complete [ 500.486401] ata1.00: exception Emask 0x11 SAct 0x20000000 SErr 0x400000 action 0x6 frozen [ 500.486407] ata1.00: irq_stat 0x48000008, interface fatal error [ 500.486412] ata1: SError: { Handshk } [ 500.486417] ata1.00: failed command: WRITE FPDMA QUEUED [ 500.486426] ata1.00: cmd 61/b8:e8:48:48:18/02:00:1d:00:00/40 tag 29 ncq dma 356352 out res 40/00:ec:48:48:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 500.486430] ata1.00: status: { DRDY } [ 500.486435] ata1: hard resetting link [ 500.502481] ata5.00: exception Emask 0x11 SAct 0x200000 SErr 0x400000 action 0x6 frozen [ 500.502487] ata5.00: irq_stat 0x48000008, interface fatal error [ 500.502492] ata5: SError: { Handshk } [ 500.502497] ata5.00: failed command: WRITE FPDMA QUEUED [ 500.502507] ata5.00: cmd 61/b8:a8:48:48:18/02:00:1d:00:00/40 tag 21 ncq dma 356352 out res 40/00:ac:48:48:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 500.502511] ata5.00: status: { DRDY } [ 500.502516] ata5: hard resetting link [ 500.962351] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.965493] ata1.00: configured for UDMA/133 [ 500.965515] ata1: EH complete [ 500.978365] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.981648] ata5.00: configured for UDMA/133 [ 500.981670] ata5: EH complete [ 509.738372] ata1.00: exception Emask 0x11 SAct 0xe0 SErr 0x400000 action 0x6 frozen [ 509.738378] ata1.00: irq_stat 0x48000008, interface fatal error [ 509.738383] ata1: SError: { Handshk } [ 509.738388] ata1.00: failed command: WRITE FPDMA QUEUED [ 509.738397] ata1.00: cmd 61/40:28:30:6c:18/05:00:1d:00:00/40 tag 5 ncq dma 688128 out res 40/00:3c:b8:4e:88/00:00:14:00:00/40 Emask 0x10 (ATA bus error) [ 509.738401] ata1.00: status: { DRDY } [ 509.738405] ata1.00: failed command: WRITE FPDMA QUEUED [ 509.738414] ata1.00: cmd 61/58:30:70:71:18/01:00:1d:00:00/40 tag 6 ncq dma 176128 out res 40/00:3c:b8:4e:88/00:00:14:00:00/40 Emask 0x10 (ATA bus error) [ 509.738417] ata1.00: status: { DRDY } [ 509.738420] ata1.00: failed command: READ FPDMA QUEUED [ 509.738429] ata1.00: cmd 60/08:38:b8:4e:88/00:00:14:00:00/40 tag 7 ncq dma 4096 in res 40/00:3c:b8:4e:88/00:00:14:00:00/40 Emask 0x10 (ATA bus error) [ 509.738433] ata1.00: status: { DRDY } [ 509.738438] ata1: hard resetting link [ 510.214330] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 510.217449] ata1.00: configured for UDMA/133 [ 510.217481] ata1: EH complete [ 514.790138] ata1: limiting SATA link speed to 1.5 Gbps [ 514.790144] ata1.00: exception Emask 0x11 SAct 0x7f8000 SErr 0x400000 action 0x6 frozen [ 514.790149] ata1.00: irq_stat 0x48000008, interface fatal error [ 514.790153] ata1: SError: { Handshk } [ 514.790158] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790167] ata1.00: cmd 61/40:78:58:88:18/05:00:1d:00:00/40 tag 15 ncq dma 688128 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790172] ata1.00: status: { DRDY } [ 514.790175] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790184] ata1.00: cmd 61/40:80:98:8d:18/05:00:1d:00:00/40 tag 16 ncq dma 688128 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790188] ata1.00: status: { DRDY } [ 514.790191] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790199] ata1.00: cmd 61/40:88:d8:92:18/05:00:1d:00:00/40 tag 17 ncq dma 688128 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790203] ata1.00: status: { DRDY } [ 514.790206] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790214] ata1.00: cmd 61/80:90:18:98:18/00:00:1d:00:00/40 tag 18 ncq dma 65536 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790218] ata1.00: status: { DRDY } [ 514.790221] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790229] ata1.00: cmd 61/40:98:a0:98:18/05:00:1d:00:00/40 tag 19 ncq dma 688128 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790233] ata1.00: status: { DRDY } [ 514.790236] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790244] ata1.00: cmd 61/40:a0:e0:9d:18/05:00:1d:00:00/40 tag 20 ncq dma 688128 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790248] ata1.00: status: { DRDY } [ 514.790250] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790259] ata1.00: cmd 61/40:a8:20:a3:18/05:00:1d:00:00/40 tag 21 ncq dma 688128 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790262] ata1.00: status: { DRDY } [ 514.790265] ata1.00: failed command: WRITE FPDMA QUEUED [ 514.790273] ata1.00: cmd 61/10:b0:60:a8:18/01:00:1d:00:00/40 tag 22 ncq dma 139264 out res 40/00:b4:60:a8:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 514.790277] ata1.00: status: { DRDY } [ 514.790282] ata1: hard resetting link [ 515.266311] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 515.269420] ata1.00: configured for UDMA/133 [ 515.269505] ata1: EH complete [ 519.814368] ata5.00: exception Emask 0x11 SAct 0xfff01fff SErr 0x400000 action 0x6 frozen [ 519.814375] ata5.00: irq_stat 0x48000008, interface fatal error [ 519.814379] ata5: SError: { Handshk } [ 519.814383] ata5.00: failed command: READ FPDMA QUEUED [ 519.814393] ata5.00: cmd 60/08:00:a0:0a:14/00:00:15:00:00/40 tag 0 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814397] ata5.00: status: { DRDY } [ 519.814400] ata5.00: failed command: READ FPDMA QUEUED [ 519.814409] ata5.00: cmd 60/08:08:a8:0a:14/00:00:15:00:00/40 tag 1 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814413] ata5.00: status: { DRDY } [ 519.814416] ata5.00: failed command: READ FPDMA QUEUED [ 519.814424] ata5.00: cmd 60/08:10:b0:0a:14/00:00:15:00:00/40 tag 2 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814428] ata5.00: status: { DRDY } [ 519.814431] ata5.00: failed command: READ FPDMA QUEUED [ 519.814439] ata5.00: cmd 60/08:18:b8:0a:14/00:00:15:00:00/40 tag 3 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814443] ata5.00: status: { DRDY } [ 519.814446] ata5.00: failed command: READ FPDMA QUEUED [ 519.814454] ata5.00: cmd 60/08:20:c0:0a:14/00:00:15:00:00/40 tag 4 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814458] ata5.00: status: { DRDY } [ 519.814461] ata5.00: failed command: READ FPDMA QUEUED [ 519.814469] ata5.00: cmd 60/08:28:c8:0a:14/00:00:15:00:00/40 tag 5 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814472] ata5.00: status: { DRDY } [ 519.814475] ata5.00: failed command: READ FPDMA QUEUED [ 519.814483] ata5.00: cmd 60/08:30:d0:0a:14/00:00:15:00:00/40 tag 6 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814487] ata5.00: status: { DRDY } [ 519.814489] ata5.00: failed command: READ FPDMA QUEUED [ 519.814498] ata5.00: cmd 60/08:38:d8:0a:14/00:00:15:00:00/40 tag 7 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814501] ata5.00: status: { DRDY } [ 519.814504] ata5.00: failed command: READ FPDMA QUEUED [ 519.814512] ata5.00: cmd 60/08:40:e0:0a:14/00:00:15:00:00/40 tag 8 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814516] ata5.00: status: { DRDY } [ 519.814518] ata5.00: failed command: READ FPDMA QUEUED [ 519.814527] ata5.00: cmd 60/08:48:e8:0a:14/00:00:15:00:00/40 tag 9 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814530] ata5.00: status: { DRDY } [ 519.814533] ata5.00: failed command: READ FPDMA QUEUED [ 519.814541] ata5.00: cmd 60/08:50:f0:0a:14/00:00:15:00:00/40 tag 10 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814545] ata5.00: status: { DRDY } [ 519.814548] ata5.00: failed command: READ FPDMA QUEUED [ 519.814556] ata5.00: cmd 60/08:58:f8:0a:14/00:00:15:00:00/40 tag 11 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814559] ata5.00: status: { DRDY } [ 519.814562] ata5.00: failed command: READ FPDMA QUEUED [ 519.814570] ata5.00: cmd 60/08:60:00:0b:14/00:00:15:00:00/40 tag 12 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814574] ata5.00: status: { DRDY } [ 519.814577] ata5.00: failed command: WRITE FPDMA QUEUED [ 519.814585] ata5.00: cmd 61/40:a0:68:c8:18/05:00:1d:00:00/40 tag 20 ncq dma 688128 out res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814589] ata5.00: status: { DRDY } [ 519.814592] ata5.00: failed command: WRITE FPDMA QUEUED [ 519.814600] ata5.00: cmd 61/b0:a8:a8:cd:18/04:00:1d:00:00/40 tag 21 ncq dma 614400 out res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814604] ata5.00: status: { DRDY } [ 519.814607] ata5.00: failed command: READ FPDMA QUEUED [ 519.814615] ata5.00: cmd 60/08:b0:50:0a:14/00:00:15:00:00/40 tag 22 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814618] ata5.00: status: { DRDY } [ 519.814621] ata5.00: failed command: READ FPDMA QUEUED [ 519.814629] ata5.00: cmd 60/08:b8:58:0a:14/00:00:15:00:00/40 tag 23 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814633] ata5.00: status: { DRDY } [ 519.814636] ata5.00: failed command: READ FPDMA QUEUED [ 519.814644] ata5.00: cmd 60/08:c0:60:0a:14/00:00:15:00:00/40 tag 24 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814647] ata5.00: status: { DRDY } [ 519.814650] ata5.00: failed command: READ FPDMA QUEUED [ 519.814658] ata5.00: cmd 60/08:c8:68:0a:14/00:00:15:00:00/40 tag 25 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814662] ata5.00: status: { DRDY } [ 519.814665] ata5.00: failed command: READ FPDMA QUEUED [ 519.814673] ata5.00: cmd 60/08:d0:70:0a:14/00:00:15:00:00/40 tag 26 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814676] ata5.00: status: { DRDY } [ 519.814679] ata5.00: failed command: READ FPDMA QUEUED [ 519.814687] ata5.00: cmd 60/08:d8:78:0a:14/00:00:15:00:00/40 tag 27 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814691] ata5.00: status: { DRDY } [ 519.814694] ata5.00: failed command: READ FPDMA QUEUED [ 519.814702] ata5.00: cmd 60/08:e0:80:0a:14/00:00:15:00:00/40 tag 28 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814705] ata5.00: status: { DRDY } [ 519.814708] ata5.00: failed command: READ FPDMA QUEUED [ 519.814716] ata5.00: cmd 60/08:e8:88:0a:14/00:00:15:00:00/40 tag 29 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814720] ata5.00: status: { DRDY } [ 519.814723] ata5.00: failed command: READ FPDMA QUEUED [ 519.814731] ata5.00: cmd 60/08:f0:90:0a:14/00:00:15:00:00/40 tag 30 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814734] ata5.00: status: { DRDY } [ 519.814737] ata5.00: failed command: READ FPDMA QUEUED [ 519.814745] ata5.00: cmd 60/08:f8:98:0a:14/00:00:15:00:00/40 tag 31 ncq dma 4096 in res 40/00:ac:a8:cd:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 519.814749] ata5.00: status: { DRDY } [ 519.814754] ata5: hard resetting link [ 520.290026] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 520.293188] ata5.00: configured for UDMA/133 [ 520.293253] ata5: EH complete [ 524.806405] ata5: limiting SATA link speed to 1.5 Gbps [ 524.806412] ata5.00: exception Emask 0x11 SAct 0xffffffff SErr 0x400000 action 0x6 frozen [ 524.806417] ata5.00: irq_stat 0x48000008, interface fatal error [ 524.806421] ata5: SError: { Handshk } [ 524.806425] ata5.00: failed command: READ FPDMA QUEUED [ 524.806434] ata5.00: cmd 60/08:00:a8:0f:70/00:00:19:00:00/40 tag 0 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806439] ata5.00: status: { DRDY } [ 524.806442] ata5.00: failed command: READ FPDMA QUEUED [ 524.806451] ata5.00: cmd 60/08:08:b0:0f:70/00:00:19:00:00/40 tag 1 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806454] ata5.00: status: { DRDY } [ 524.806457] ata5.00: failed command: READ FPDMA QUEUED [ 524.806466] ata5.00: cmd 60/08:10:b8:0f:70/00:00:19:00:00/40 tag 2 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806470] ata5.00: status: { DRDY } [ 524.806473] ata5.00: failed command: READ FPDMA QUEUED [ 524.806481] ata5.00: cmd 60/08:18:c0:0f:70/00:00:19:00:00/40 tag 3 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806485] ata5.00: status: { DRDY } [ 524.806488] ata5.00: failed command: READ FPDMA QUEUED [ 524.806496] ata5.00: cmd 60/08:20:c8:0f:70/00:00:19:00:00/40 tag 4 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806499] ata5.00: status: { DRDY } [ 524.806502] ata5.00: failed command: READ FPDMA QUEUED [ 524.806510] ata5.00: cmd 60/08:28:d0:0f:70/00:00:19:00:00/40 tag 5 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806514] ata5.00: status: { DRDY } [ 524.806517] ata5.00: failed command: READ FPDMA QUEUED [ 524.806525] ata5.00: cmd 60/08:30:d8:0f:70/00:00:19:00:00/40 tag 6 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806528] ata5.00: status: { DRDY } [ 524.806531] ata5.00: failed command: READ FPDMA QUEUED [ 524.806540] ata5.00: cmd 60/08:38:e0:0f:70/00:00:19:00:00/40 tag 7 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806543] ata5.00: status: { DRDY } [ 524.806546] ata5.00: failed command: READ FPDMA QUEUED [ 524.806554] ata5.00: cmd 60/08:40:e8:0f:70/00:00:19:00:00/40 tag 8 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806558] ata5.00: status: { DRDY } [ 524.806560] ata5.00: failed command: READ FPDMA QUEUED [ 524.806569] ata5.00: cmd 60/08:48:f0:0f:70/00:00:19:00:00/40 tag 9 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806572] ata5.00: status: { DRDY } [ 524.806575] ata5.00: failed command: WRITE FPDMA QUEUED [ 524.806583] ata5.00: cmd 61/40:50:70:e8:18/05:00:1d:00:00/40 tag 10 ncq dma 688128 out res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806587] ata5.00: status: { DRDY } [ 524.806590] ata5.00: failed command: WRITE FPDMA QUEUED [ 524.806598] ata5.00: cmd 61/a8:58:b0:ed:18/02:00:1d:00:00/40 tag 11 ncq dma 348160 out res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806602] ata5.00: status: { DRDY } [ 524.806605] ata5.00: failed command: READ FPDMA QUEUED [ 524.806613] ata5.00: cmd 60/08:60:00:0f:70/00:00:19:00:00/40 tag 12 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806616] ata5.00: status: { DRDY } [ 524.806619] ata5.00: failed command: READ FPDMA QUEUED [ 524.806627] ata5.00: cmd 60/08:68:08:0f:70/00:00:19:00:00/40 tag 13 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806631] ata5.00: status: { DRDY } [ 524.806634] ata5.00: failed command: READ FPDMA QUEUED [ 524.806642] ata5.00: cmd 60/08:70:10:0f:70/00:00:19:00:00/40 tag 14 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806646] ata5.00: status: { DRDY } [ 524.806648] ata5.00: failed command: READ FPDMA QUEUED [ 524.806657] ata5.00: cmd 60/08:78:18:0f:70/00:00:19:00:00/40 tag 15 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806660] ata5.00: status: { DRDY } [ 524.806663] ata5.00: failed command: READ FPDMA QUEUED [ 524.806671] ata5.00: cmd 60/08:80:20:0f:70/00:00:19:00:00/40 tag 16 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806675] ata5.00: status: { DRDY } [ 524.806677] ata5.00: failed command: READ FPDMA QUEUED [ 524.806686] ata5.00: cmd 60/08:88:28:0f:70/00:00:19:00:00/40 tag 17 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806689] ata5.00: status: { DRDY } [ 524.806692] ata5.00: failed command: READ FPDMA QUEUED [ 524.806700] ata5.00: cmd 60/08:90:30:0f:70/00:00:19:00:00/40 tag 18 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806704] ata5.00: status: { DRDY } [ 524.806706] ata5.00: failed command: READ FPDMA QUEUED [ 524.806714] ata5.00: cmd 60/08:98:38:0f:70/00:00:19:00:00/40 tag 19 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806718] ata5.00: status: { DRDY } [ 524.806721] ata5.00: failed command: READ FPDMA QUEUED [ 524.806729] ata5.00: cmd 60/08:a0:40:0f:70/00:00:19:00:00/40 tag 20 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806732] ata5.00: status: { DRDY } [ 524.806735] ata5.00: failed command: READ FPDMA QUEUED [ 524.806743] ata5.00: cmd 60/08:a8:48:0f:70/00:00:19:00:00/40 tag 21 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806747] ata5.00: status: { DRDY } [ 524.806750] ata5.00: failed command: READ FPDMA QUEUED [ 524.806758] ata5.00: cmd 60/08:b0:50:0f:70/00:00:19:00:00/40 tag 22 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806761] ata5.00: status: { DRDY } [ 524.806764] ata5.00: failed command: READ FPDMA QUEUED [ 524.806772] ata5.00: cmd 60/08:b8:58:0f:70/00:00:19:00:00/40 tag 23 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806776] ata5.00: status: { DRDY } [ 524.806779] ata5.00: failed command: READ FPDMA QUEUED [ 524.806787] ata5.00: cmd 60/08:c0:60:0f:70/00:00:19:00:00/40 tag 24 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806790] ata5.00: status: { DRDY } [ 524.806793] ata5.00: failed command: READ FPDMA QUEUED [ 524.806801] ata5.00: cmd 60/08:c8:68:0f:70/00:00:19:00:00/40 tag 25 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806805] ata5.00: status: { DRDY } [ 524.806808] ata5.00: failed command: READ FPDMA QUEUED [ 524.806816] ata5.00: cmd 60/08:d0:78:0f:70/00:00:19:00:00/40 tag 26 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806819] ata5.00: status: { DRDY } [ 524.806822] ata5.00: failed command: READ FPDMA QUEUED [ 524.806830] ata5.00: cmd 60/08:d8:80:0f:70/00:00:19:00:00/40 tag 27 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806834] ata5.00: status: { DRDY } [ 524.806837] ata5.00: failed command: READ FPDMA QUEUED [ 524.806845] ata5.00: cmd 60/08:e0:88:0f:70/00:00:19:00:00/40 tag 28 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806848] ata5.00: status: { DRDY } [ 524.806851] ata5.00: failed command: READ FPDMA QUEUED [ 524.806860] ata5.00: cmd 60/08:e8:90:0f:70/00:00:19:00:00/40 tag 29 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806863] ata5.00: status: { DRDY } [ 524.806866] ata5.00: failed command: READ FPDMA QUEUED [ 524.806874] ata5.00: cmd 60/08:f0:98:0f:70/00:00:19:00:00/40 tag 30 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806878] ata5.00: status: { DRDY } [ 524.806880] ata5.00: failed command: READ FPDMA QUEUED [ 524.806889] ata5.00: cmd 60/08:f8:a0:0f:70/00:00:19:00:00/40 tag 31 ncq dma 4096 in res 40/00:5c:b0:ed:18/00:00:1d:00:00/40 Emask 0x10 (ATA bus error) [ 524.806892] ata5.00: status: { DRDY } [ 524.806897] ata5: hard resetting link [ 525.286275] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 525.289424] ata5.00: configured for UDMA/133 [ 525.289497] ata5: EH complete [ 1514.291025] bpfilter: Loaded bpfilter_umh pid 2602 [ 1810.041115] kauditd_printk_skb: 13 callbacks suppressed [ 1810.041118] audit: type=1400 audit(1545247317.088:25): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=3411 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1810.817819] audit: type=1400 audit(1545247317.864:26): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=3411 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1810.970958] audit: type=1400 audit(1545247318.016:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=3414 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [20570.369006] nouveau 0000:07:00.0: Xorg[1825]: Unknown handle 0x00000063 [20570.369013] nouveau 0000:07:00.0: Xorg[1825]: validate_init [20570.369016] nouveau 0000:07:00.0: Xorg[1825]: validate: -2 [20600.441336] nouveau 0000:07:00.0: Xorg[1825]: Unknown handle 0x0000002d [20600.441346] nouveau 0000:07:00.0: Xorg[1825]: validate_init [20600.441352] nouveau 0000:07:00.0: Xorg[1825]: validate: -2 [20600.925635] nouveau 0000:07:00.0: Xorg[1825]: Unknown handle 0x0000006d [20600.925643] nouveau 0000:07:00.0: Xorg[1825]: validate_init [20600.925646] nouveau 0000:07:00.0: Xorg[1825]: validate: -2 [20600.926165] nouveau 0000:07:00.0: Xorg[1825]: Unknown handle 0x00000070 [20600.926169] nouveau 0000:07:00.0: Xorg[1825]: validate_init [20600.926172] nouveau 0000:07:00.0: Xorg[1825]: validate: -2 [20614.297349] nouveau 0000:07:00.0: Xorg[1825]: Unknown handle 0x00000043 [20614.297355] nouveau 0000:07:00.0: Xorg[1825]: validate_init [20614.297357] nouveau 0000:07:00.0: Xorg[1825]: validate: -2 [21146.441101] nouveau 0000:07:00.0: Xorg[1825]: Unknown handle 0x00000059 [21146.441107] nouveau 0000:07:00.0: Xorg[1825]: validate_init [21146.441109] nouveau 0000:07:00.0: Xorg[1825]: validate: -2 [21384.393196] WARNING: CPU: 7 PID: 11973 at drivers/gpu/drm/nouveau/nvif/vmm.c:71 nvif_vmm_put+0x6d/0x80 [nouveau] [21384.393199] Modules linked in: ipt_MASQUERADE nf_log_ipv4 nf_log_common xt_LOG xt_conntrack xt_limit xt_tcpudp iptable_filter bpfilter nf_nat_ftp nf_conntrack_ftp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep kvm snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi irqbypass joydev crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_seq snd_seq_device snd_timer aesni_intel eeepc_wmi asus_wmi snd aes_x86_64 crypto_simd cryptd input_leds soundcore ccp serio_raw glue_helper k10temp sparse_keymap wmi_bmof mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy [21384.393225] async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear raid1 hid_generic usbhid hid nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 i2c_piix4 mii ahci libahci wmi gpio_amdpt gpio_generic [21384.393241] CPU: 7 PID: 11973 Comm: kworker/7:1 Not tainted 4.18.0-12-generic #13-Ubuntu [21384.393241] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4023 08/20/2018 [21384.393281] Workqueue: events nouveau_cli_work [nouveau] [21384.393315] RIP: 0010:nvif_vmm_put+0x6d/0x80 [nouveau] [21384.393315] Code: 00 00 48 8d 55 e0 be 02 00 00 00 48 c7 45 e0 00 00 00 00 48 89 45 e8 e8 a1 e5 ff ff 85 c0 75 0a 48 c7 43 08 00 00 00 00 eb b7 <0f> 0b eb f2 e8 7a 59 0b ee 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 [21384.393338] RSP: 0018:ffffbdb5c3cebdb8 EFLAGS: 00010282 [21384.393339] RAX: 00000000fffffffe RBX: ffffbdb5c3cebde8 RCX: 0000000000000000 [21384.393340] RDX: 0000000000000000 RSI: ffffbdb5c3cebd28 RDI: ffffbdb5c3cebdc8 [21384.393341] RBP: ffffbdb5c3cebdd8 R08: ffffffffc0435b40 R09: 0000000000000000 [21384.393342] R10: 8080808080808080 R11: 0000000000000030 R12: ffffbdb5c3cebe20 [21384.393342] R13: dead000000000200 R14: dead000000000100 R15: ffff9e281546be50 [21384.393344] FS: 0000000000000000(0000) GS:ffff9e2b5edc0000(0000) knlGS:0000000000000000 [21384.393345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [21384.393345] CR2: 00005652d14b80a8 CR3: 0000000128eee000 CR4: 00000000003406e0 [21384.393346] Call Trace: [21384.393385] nouveau_vma_del+0x75/0xc0 [nouveau] [21384.393428] nouveau_gem_object_delete_work+0x3a/0x60 [nouveau] [21384.393468] nouveau_cli_work+0xc3/0x100 [nouveau] [21384.393472] ? __schedule+0x2a6/0x840 [21384.393476] process_one_work+0x20f/0x3c0 [21384.393478] worker_thread+0x34/0x400 [21384.393480] kthread+0x120/0x140 [21384.393482] ? pwq_unbound_release_workfn+0xd0/0xd0 [21384.393483] ? kthread_bind+0x40/0x40 [21384.393485] ret_from_fork+0x22/0x40 [21384.393486] ---[ end trace 17a2d66ea8205301 ]---