[ 0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17 [ 0.000000] Linux version 4.18.0-11-generic (buildd@lcy01-amd64-027) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #12-Ubuntu SMP Tue Oct 23 19:22:37 UTC 2018 (Ubuntu 4.18.0-11.12-generic 4.18.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-11-generic root=UUID=074ff7b7-c074-4137-8cf7-d46cdd7dd723 ro quiet nosplash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000099011fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000099012000-0x00000000abedcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000abedd000-0x00000000abeddfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000abede000-0x00000000b7f7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7f7f000-0x00000000b7fcefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7fcf000-0x00000000b7ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7fff000-0x00000000b80fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000005427fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 20F9004FUS/20F9004FUS, BIOS N1CET66W (1.34 ) 03/22/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x542800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00BC000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 00BA000000 mask 7FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0x99012 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x32535c000, 0x32535cfff] PGTABLE [ 0.000000] BRK [0x32535d000, 0x32535dfff] PGTABLE [ 0.000000] BRK [0x32535e000, 0x32535efff] PGTABLE [ 0.000000] BRK [0x32535f000, 0x32535ffff] PGTABLE [ 0.000000] BRK [0x325360000, 0x325360fff] PGTABLE [ 0.000000] BRK [0x325361000, 0x325361fff] PGTABLE [ 0.000000] BRK [0x325362000, 0x325362fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31033000-0x34810fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000B7FD0188 0000DC (v01 LENOVO TP-N1C 00000000 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000B7FF4000 0000F4 (v05 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000B7FDD000 01258F (v02 LENOVO TP-N1C 00001340 INTL 20141107) [ 0.000000] ACPI: FACS 0x00000000B7FAA000 000040 [ 0.000000] ACPI: TCPA 0x00000000B7FFC000 000032 (v02 LENOVO TP-N1C 00000002 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FFB000 0003A2 (v02 LENOVO TcgTable 00001000 INTL 20141107) [ 0.000000] ACPI: UEFI 0x00000000B7FC1000 000042 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FF6000 004E0A (v02 LENOVO SaSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000B7FF5000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107) [ 0.000000] ACPI: ECDT 0x00000000B7FF3000 000052 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000B7FF2000 000038 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000B7FF1000 0000BC (v03 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000B7FF0000 00003C (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FDB000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107) [ 0.000000] ACPI: DBGP 0x00000000B7FDA000 000034 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: DBG2 0x00000000B7FD9000 000054 (v00 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: BOOT 0x00000000B7FD8000 000028 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000B7FD7000 00004A (v02 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: SLIC 0x00000000B7FD6000 000176 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000B7FD5000 000E73 (v02 LENOVO CpuSsdt 00003000 INTL 20141107) [ 0.000000] ACPI: SSDT 0x00000000B7FD4000 000403 (v02 LENOVO CtdpB 00001000 INTL 20141107) [ 0.000000] ACPI: MSDM 0x00000000B7FD3000 000055 (v03 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000B7FD2000 0000A8 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: ASF! 0x00000000B7FD1000 0000A5 (v32 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000B7FFD000 000044 (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000B7FA8000 00013E (v01 LENOVO TP-N1C 00001340 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000005427fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x5427d5000-0x5427fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000005427fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000099011fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000005427fffff] [ 0.000000] Reserved but unavailable: 28754 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000005427fffff] [ 0.000000] On node 0 totalpages: 5093294 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9729 pages used for memmap [ 0.000000] DMA32 zone: 622610 pages, LIFO batch:31 [ 0.000000] Normal zone: 69792 pages used for memmap [ 0.000000] Normal zone: 4466688 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xba800000-0xbc7fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x99012000-0xabedcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xabedd000-0xabeddfff] [ 0.000000] PM: Registered nosave memory: [mem 0xabede000-0xb7f7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7f7f000-0xb7fcefff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7fcf000-0xb7ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7fff000-0xb80fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8100000-0xb85fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] [mem 0xbc800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 5013688 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-11-generic root=UUID=074ff7b7-c074-4137-8cf7-d46cdd7dd723 ro quiet nosplash [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 19899360K/20373176K available (12300K kernel code, 2633K rwdata, 4348K rodata, 2440K init, 2336K bss, 473816K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 40807 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 39 [ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.004000] DMAR: RMRR base: 0x000000b751f000 end: 0x000000b753efff [ 0.004000] DMAR: RMRR base: 0x000000ba000000 end: 0x000000bc7fffff [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.004000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.004000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 2400.000 MHz processor [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.032375] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.034494] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.034584] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.034651] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.034866] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.034867] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.034873] mce: CPU supports 8 MCE banks [ 0.034883] CPU0: Thermal monitoring enabled (TM1) [ 0.034899] process: using mwait in idle threads [ 0.034902] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.034903] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.034904] Spectre V2 : Mitigation: Full generic retpoline [ 0.034905] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.034905] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.034906] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.034907] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.040411] Freeing SMP alternatives memory: 36K [ 0.043208] TSC deadline timer enabled [ 0.043213] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.043301] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.043336] ... version: 4 [ 0.043336] ... bit width: 48 [ 0.043337] ... generic registers: 4 [ 0.043337] ... value mask: 0000ffffffffffff [ 0.043338] ... max period: 00007fffffffffff [ 0.043339] ... fixed-purpose events: 3 [ 0.043339] ... event mask: 000000070000000f [ 0.043379] Hierarchical SRCU implementation. [ 0.044000] smp: Bringing up secondary CPUs ... [ 0.044000] x86: Booting SMP configuration: [ 0.044000] .... node #0, CPUs: #1 [ 0.044000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.044000] #2 #3 [ 0.044493] smp: Brought up 1 node, 4 CPUs [ 0.044493] smpboot: Max logical packages: 1 [ 0.044493] smpboot: Total of 4 processors activated (19200.00 BogoMIPS) [ 0.048472] devtmpfs: initialized [ 0.048472] x86/mm: Memory block size: 128MB [ 0.049552] PM: Registering ACPI NVS region [mem 0xabedd000-0xabeddfff] (4096 bytes) [ 0.049552] PM: Registering ACPI NVS region [mem 0xb7f7f000-0xb7fcefff] (327680 bytes) [ 0.049552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.049552] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.049552] pinctrl core: initialized pinctrl subsystem [ 0.049552] RTC time: 17:12:41, date: 11/16/18 [ 0.049552] NET: Registered protocol family 16 [ 0.049552] audit: initializing netlink subsys (disabled) [ 0.049552] audit: type=2000 audit(1542388361.048:1): state=initialized audit_enabled=0 res=1 [ 0.049552] cpuidle: using governor ladder [ 0.049552] cpuidle: using governor menu [ 0.049552] Simple Boot Flag at 0x47 set to 0x1 [ 0.049552] ACPI: bus type PCI registered [ 0.049552] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.049552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.049552] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.049552] PCI: Using configuration type 1 for base access [ 0.053255] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.053255] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.053255] ACPI: Added _OSI(Module Device) [ 0.053255] ACPI: Added _OSI(Processor Device) [ 0.053255] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.053255] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053255] ACPI: Added _OSI(Linux-Dell-Video) [ 0.053255] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.053255] ACPI: EC: EC started [ 0.053255] ACPI: EC: interrupt blocked [ 0.053255] ACPI: \: Used as first EC [ 0.053255] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.053255] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.092783] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.095770] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.106905] ACPI: Dynamic OEM Table Load: [ 0.106921] ACPI: SSDT 0xFFFF902FEA4F1000 00068B (v02 PmRef Cpu0Ist 00003000 INTL 20141107) [ 0.107592] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.108646] ACPI: Dynamic OEM Table Load: [ 0.108654] ACPI: SSDT 0xFFFF902FEA61C400 0003CF (v02 PmRef Cpu0Cst 00003001 INTL 20141107) [ 0.109168] ACPI: Dynamic OEM Table Load: [ 0.109174] ACPI: SSDT 0xFFFF902FEA652B40 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20141107) [ 0.109527] ACPI: Dynamic OEM Table Load: [ 0.109533] ACPI: SSDT 0xFFFF902FEA67D200 000130 (v02 PmRef HwpLvt 00003000 INTL 20141107) [ 0.110570] ACPI: Dynamic OEM Table Load: [ 0.110579] ACPI: SSDT 0xFFFF902FEA4F2800 0005AA (v02 PmRef ApIst 00003000 INTL 20141107) [ 0.111483] ACPI: Dynamic OEM Table Load: [ 0.111490] ACPI: SSDT 0xFFFF902FEA67C600 000119 (v02 PmRef ApHwp 00003000 INTL 20141107) [ 0.111959] ACPI: Dynamic OEM Table Load: [ 0.111965] ACPI: SSDT 0xFFFF902FEA67C200 000119 (v02 PmRef ApCst 00003000 INTL 20141107) [ 0.113929] ACPI: Interpreter enabled [ 0.113982] ACPI: (supports S0 S3 S4 S5) [ 0.113983] ACPI: Using IOAPIC for interrupt routing [ 0.114015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.114275] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.118154] ACPI: Power Resource [PUBS] (on) [ 0.118497] ACPI: Power Resource [PG00] (on) [ 0.118633] ACPI: Power Resource [PG01] (on) [ 0.118763] ACPI: Power Resource [PG02] (on) [ 0.121049] ACPI: Power Resource [WRST] (off) [ 0.121170] ACPI: Power Resource [WRST] (off) [ 0.143213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.143332] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.143448] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.143563] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.143678] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.143792] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.143907] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.144027] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.144149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.144155] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.144304] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.144372] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.144374] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.144376] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.144377] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.144627] PCI host bridge to bus 0000:00 [ 0.144629] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.144631] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.144632] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.144634] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window] [ 0.144636] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.144645] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.144755] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.144768] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.144775] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.144780] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f] [ 0.144926] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.144943] pci 0000:00:08.0: reg 0x10: [mem 0xe124a000-0xe124afff 64bit] [ 0.145092] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.145115] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit] [ 0.145183] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.145413] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.145436] pci 0000:00:14.2: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit] [ 0.145590] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.145615] pci 0000:00:16.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit] [ 0.145670] pci 0000:00:16.0: PME# supported from D3hot [ 0.145851] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.145869] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff] [ 0.145876] pci 0000:00:17.0: reg 0x14: [mem 0xe124f000-0xe124f0ff] [ 0.145884] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087] [ 0.145891] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b] [ 0.145898] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f] [ 0.145906] pci 0000:00:17.0: reg 0x24: [mem 0xe124d000-0xe124d7ff] [ 0.145946] pci 0000:00:17.0: PME# supported from D3hot [ 0.146122] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.146192] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.146374] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 [ 0.146443] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.146651] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.146920] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.146936] pci 0000:00:1f.2: reg 0x10: [mem 0xe1244000-0xe1247fff] [ 0.147153] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.147182] pci 0000:00:1f.3: reg 0x10: [mem 0xe1240000-0xe1243fff 64bit] [ 0.147215] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit] [ 0.147267] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.147447] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.147508] pci 0000:00:1f.4: reg 0x10: [mem 0xe124e000-0xe124e0ff 64bit] [ 0.147579] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.147816] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000 [ 0.147843] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff] [ 0.147942] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.148169] pci 0000:02:00.0: [10ec:522a] type 00 class 0xff0000 [ 0.148199] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1100fff] [ 0.148330] pci 0000:02:00.0: supports D1 D2 [ 0.148332] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.148465] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.148469] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.148853] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000 [ 0.148953] pci 0000:04:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit] [ 0.149236] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.149920] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.149924] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe10fffff] [ 0.151473] ACPI: EC: interrupt unblocked [ 0.151511] ACPI: EC: event unblocked [ 0.151529] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.151531] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.151755] SCSI subsystem initialized [ 0.151768] libata version 3.00 loaded. [ 0.151768] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.151768] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.151768] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.151768] vgaarb: loaded [ 0.151768] ACPI: bus type USB registered [ 0.151768] usbcore: registered new interface driver usbfs [ 0.151768] usbcore: registered new interface driver hub [ 0.151768] usbcore: registered new device driver usb [ 0.151768] pps_core: LinuxPPS API ver. 1 registered [ 0.151768] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.151768] PTP clock support registered [ 0.151768] EDAC MC: Ver: 3.0.0 [ 0.152045] PCI: Using ACPI for IRQ routing [ 0.155065] PCI: pci_cache_line_size set to 64 bytes [ 0.155148] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.155149] e820: reserve RAM buffer [mem 0x99012000-0x9bffffff] [ 0.155150] e820: reserve RAM buffer [mem 0x542800000-0x543ffffff] [ 0.156003] NetLabel: Initializing [ 0.156003] NetLabel: domain hash size = 128 [ 0.156003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.156003] NetLabel: unlabeled traffic allowed by default [ 0.156453] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.156460] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.162037] clocksource: Switched to clocksource tsc-early [ 0.171736] VFS: Disk quotas dquot_6.6.0 [ 0.171749] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.171858] AppArmor: AppArmor Filesystem Enabled [ 0.171885] pnp: PnP ACPI init [ 0.172599] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.172601] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.172603] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.172604] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.172606] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.172608] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.172609] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.172611] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.172613] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.172614] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.172616] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.172618] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.172619] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.172621] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.172623] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved [ 0.172624] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.172626] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.172632] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.172779] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.172781] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.172783] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.172784] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.172786] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.172788] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.172789] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.172791] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.172793] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.172794] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.172796] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.172797] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.172800] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.172801] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.172803] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.172805] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.172807] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.172808] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.172810] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.172812] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved [ 0.172816] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.172897] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.172917] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.172936] pnp 00:04: Plug and Play ACPI device, IDs LEN004b PNP0f13 (active) [ 0.172979] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.172983] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.173697] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.173699] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.173701] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.173702] system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.173704] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.173706] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.173708] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.173711] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.174096] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.174100] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.174185] pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.174239] pnp: PnP ACPI: found 9 devices [ 0.179976] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.179995] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.180000] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.180009] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.180013] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe10fffff] [ 0.180020] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.180021] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.180023] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.180024] pci_bus 0000:00: resource 7 [mem 0xbc800000-0xfebfffff window] [ 0.180026] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 0.180028] pci_bus 0000:04: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.180142] NET: Registered protocol family 2 [ 0.180331] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.180423] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.180723] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.180839] TCP: Hash tables configured (established 262144 bind 65536) [ 0.180878] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.180956] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.181048] NET: Registered protocol family 1 [ 0.181052] NET: Registered protocol family 44 [ 0.181061] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.181379] PCI: CLS 0 bytes, default 64 [ 0.181413] Unpacking initramfs... [ 1.087819] Freeing initrd memory: 57208K [ 1.100073] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.100086] software IO TLB [mem 0x95012000-0x99012000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 1.100245] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] [ 1.100250] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs [ 1.100314] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns [ 1.100325] clocksource: Switched to clocksource tsc [ 1.100388] Scanning for low memory corruption every 60 seconds [ 1.101070] Initialise system trusted keyrings [ 1.101082] Key type blacklist registered [ 1.101107] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.102333] zbud: loaded [ 1.102863] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.103029] fuse init (API version 7.27) [ 1.103080] pstore: using deflate compression [ 1.104196] Key type asymmetric registered [ 1.104197] Asymmetric key parser 'x509' registered [ 1.104226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.104251] io scheduler noop registered [ 1.104252] io scheduler deadline registered [ 1.104276] io scheduler cfq registered (default) [ 1.104737] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.104783] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.104783] vesafb: scrolling: redraw [ 1.104785] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.104796] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k [ 1.301126] Console: switching to colour frame buffer device 240x67 [ 1.496635] fb0: VESA VGA frame buffer device [ 1.496650] intel_idle: MWAIT substates: 0x11142120 [ 1.496651] intel_idle: v0.4.1 model 0x4E [ 1.496855] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.497179] ACPI: AC Adapter [AC] (on-line) [ 1.497238] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.497248] ACPI: Lid Switch [LID] [ 1.497277] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.497283] ACPI: Sleep Button [SLPB] [ 1.497328] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.497333] ACPI: Power Button [PWRF] [ 1.500479] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.500480] ACPI: Thermal Zone [THM0] (31 C) [ 1.500712] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.502668] Linux agpgart interface v0.103 [ 1.505027] tpm_tis 00:08: 1.2 TPM (device-id 0x1B, rev-id 16) [ 1.518970] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 1.519970] tpm tpm0: TPM is disabled/deactivated (0x6) [ 1.519973] tpm tpm0: tpm_read_log_acpi: TCPA log area empty [ 1.519988] tpm_tis: probe of 00:08 failed with error -5 [ 1.520383] ACPI: Battery Slot [BAT0] (battery present) [ 1.521418] loop: module loaded [ 1.521588] libphy: Fixed MDIO Bus: probed [ 1.521589] tun: Universal TUN/TAP device driver, 1.6 [ 1.521625] PPP generic driver version 2.4.2 [ 1.521663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.521665] ehci-pci: EHCI PCI platform driver [ 1.521675] ehci-platform: EHCI generic platform driver [ 1.521683] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.521685] ohci-pci: OHCI PCI platform driver [ 1.521693] ohci-platform: OHCI generic platform driver [ 1.521699] uhci_hcd: USB Universal Host Controller Interface driver [ 1.521896] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.521907] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.523033] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810 [ 1.523041] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.523319] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.523321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.523323] usb usb1: Product: xHCI Host Controller [ 1.523324] usb usb1: Manufacturer: Linux 4.18.0-11-generic xhci-hcd [ 1.523325] usb usb1: SerialNumber: 0000:00:14.0 [ 1.523427] hub 1-0:1.0: USB hub found [ 1.523446] hub 1-0:1.0: 12 ports detected [ 1.525398] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.525402] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.525404] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.525441] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.525443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.525444] usb usb2: Product: xHCI Host Controller [ 1.525445] usb usb2: Manufacturer: Linux 4.18.0-11-generic xhci-hcd [ 1.525447] usb usb2: SerialNumber: 0000:00:14.0 [ 1.525534] hub 2-0:1.0: USB hub found [ 1.525564] hub 2-0:1.0: 6 ports detected [ 1.526774] usb: port power management may be unreliable [ 1.526938] random: fast init done [ 1.527295] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.530998] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.531084] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.531347] mousedev: PS/2 mouse device common for all mice [ 1.531835] rtc_cmos 00:02: RTC can wake from S4 [ 1.533505] rtc_cmos 00:02: registered as rtc0 [ 1.533519] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.533525] i2c /dev entries driver [ 1.533529] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.533990] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.534391] device-mapper: uevent: version 1.0.3 [ 1.534692] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.534778] intel_pstate: Intel P-state driver initializing [ 1.536850] intel_pstate: HWP enabled [ 1.537098] ledtrig-cpu: registered to indicate activity on CPUs [ 1.537452] intel_pmc_core: initialized [ 1.539454] NET: Registered protocol family 10 [ 1.541759] ACPI: Battery Slot [BAT1] (battery present) [ 1.544739] Segment Routing with IPv6 [ 1.544758] NET: Registered protocol family 17 [ 1.544787] Key type dns_resolver registered [ 1.544975] RAS: Correctable Errors collector initialized. [ 1.545005] microcode: sig=0x406e3, pf=0x80, revision=0xc6 [ 1.545036] microcode: Microcode Update Driver: v2.2. [ 1.545044] sched_clock: Marking stable (1545033486, 0)->(1524205322, 20828164) [ 1.545227] registered taskstats version 1 [ 1.545238] Loading compiled-in X.509 certificates [ 1.547352] Loaded X.509 cert 'Build time autogenerated kernel key: 7c7983926910d6d480d0301e92e7e36e9c7fb1c3' [ 1.547370] zswap: loaded using pool lzo/zbud [ 1.550548] Key type big_key registered [ 1.550551] Key type trusted registered [ 1.552062] Key type encrypted registered [ 1.552065] AppArmor: AppArmor sha1 policy hashing enabled [ 1.552070] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.552074] ima: Allocated hash algorithm: sha1 [ 1.552085] evm: Initialising EVM extended attributes: [ 1.552085] evm: security.selinux [ 1.552086] evm: security.SMACK64 [ 1.552086] evm: security.SMACK64EXEC [ 1.552087] evm: security.SMACK64TRANSMUTE [ 1.552087] evm: security.SMACK64MMAP [ 1.552087] evm: security.apparmor [ 1.552088] evm: security.ima [ 1.552088] evm: security.capability [ 1.552089] evm: HMAC attrs: 0x1 [ 1.553116] Magic number: 10:205:239 [ 1.553117] hash matches drivers/base/power/main.c:824 [ 1.553168] memory memory117: hash matches [ 1.553287] rtc_cmos 00:02: setting system clock to 2018-11-16 17:12:43 UTC (1542388363) [ 1.844259] Freeing unused kernel image memory: 2440K [ 1.860664] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.884665] Write protecting the kernel read-only data: 20480k [ 1.885815] Freeing unused kernel image memory: 2008K [ 1.886187] Freeing unused kernel image memory: 1796K [ 1.894279] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.894279] x86/mm: Checking user space page tables [ 1.902024] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.915213] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.915323] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.915331] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.978685] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.978755] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.984173] ahci 0000:00:17.0: version 3.0 [ 1.987315] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.987355] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.994074] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.994076] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.994311] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.994497] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode [ 1.994499] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.994849] scsi host0: ahci [ 2.004321] scsi host1: ahci [ 2.004386] ata1: DUMMY [ 2.004388] ata2: SATA max UDMA/133 abar m2048@0xe124d000 port 0xe124d180 irq 123 [ 2.015448] usb 1-2: config 1 has an invalid interface number: 12 but max is 4 [ 2.015450] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [ 2.015451] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [ 2.015453] usb 1-2: config 1 has no interface number 1 [ 2.015455] usb 1-2: config 1 has no interface number 4 [ 2.016366] usb 1-2: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06 [ 2.016369] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.016370] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A [ 2.016372] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [ 2.016373] usb 1-2: SerialNumber: LF63671431041014 [ 2.042452] checking generic (c0000000 7f0000) vs hw (c0000000 20000000) [ 2.042453] fb: switching to inteldrmfb from VESA VGA [ 2.042469] Console: switching to colour dummy device 80x25 [ 2.042542] [drm] Replacing VGA console driver [ 2.043397] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.043398] [drm] Driver supports precise vblank timestamp query. [ 2.044248] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.044821] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 2.052651] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 2.054713] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.055027] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.152228] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 2.199392] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.256679] fbcon: inteldrmfb (fb0) is primary device [ 2.270782] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:fc:44:98 [ 2.270783] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.270882] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF [ 2.271565] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.317943] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 2.317945] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.321242] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.322213] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.322215] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.323072] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 2.324470] ata2.00: ATA-9: SanDisk SD8SN8U512G1122, X4120000, max UDMA/133 [ 2.324471] ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.326020] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.326022] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.326879] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 2.328845] ata2.00: configured for UDMA/133 [ 2.330986] ata2.00: failed to disable DEVSLP [ 2.331006] ata2.00: failed to enable DIPM, Emask 0x40 [ 2.448745] usb 1-8: new high-speed USB device number 4 using xhci_hcd [ 2.608047] usb 1-8: New USB device found, idVendor=5986, idProduct=0706, bcdDevice= 0.12 [ 2.608048] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.608050] usb 1-8: Product: Integrated Camera [ 2.608051] usb 1-8: Manufacturer: SunplusIT Inc [ 2.736109] usb 1-9: new full-speed USB device number 5 using xhci_hcd [ 2.861767] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762] [ 2.886935] usb 1-9: New USB device found, idVendor=138a, idProduct=0090, bcdDevice= 1.64 [ 2.886937] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.886939] usb 1-9: SerialNumber: 2d7f80c95490 [ 2.898472] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..] [ 2.898492] psmouse serio1: synaptics: Your touchpad (PNP: LEN004b PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.972660] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3145, fw id: 2073050 [ 2.972670] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.020832] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 3.633337] Console: switching to colour frame buffer device 240x67 [ 3.652710] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.743262] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.994204] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 7.707296] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.708516] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7.708519] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7.709628] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 7.713507] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7.713510] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7.714656] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 7.717255] ata2.00: configured for UDMA/133 [ 7.717739] scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SN8U5 0000 PQ: 0 ANSI: 5 [ 7.718252] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 7.718262] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 7.718264] sd 1:0:0:0: [sda] Write Protect is off [ 7.718266] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.718283] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.718827] sda: sda1 sda2 sda3 [ 7.719110] sd 1:0:0:0: [sda] Attached SCSI disk [ 8.089303] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.297333] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.316880] systemd[1]: Detected architecture x86-64. [ 8.320045] systemd[1]: Set hostname to . [ 8.538016] systemd[1]: Listening on Journal Audit Socket. [ 8.538945] systemd[1]: Created slice User and Session Slice. [ 8.539029] systemd[1]: Listening on udev Control Socket. [ 8.539098] systemd[1]: Listening on Journal Socket. [ 8.540387] systemd[1]: Starting Load Kernel Modules... [ 8.540405] systemd[1]: Reached target System Time Synchronized. [ 8.541136] systemd[1]: Starting Uncomplicated firewall... [ 8.577317] EXT4-fs (sda1): re-mounted. Opts: discard,commit=500,errors=remount-ro [ 8.648430] systemd-journald[344]: Received request to flush runtime journal from PID 1 [ 8.655453] lp: driver loaded but no devices found [ 8.684847] ppdev: user-space parallel port driver [ 9.183403] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 9.206848] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.215994] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.262503] Intel(R) Wireless WiFi driver for Linux [ 9.262504] Copyright(c) 2003- 2015 Intel Corporation [ 9.269158] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 9.269160] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.269161] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.269161] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.269162] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.269163] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 9.278892] iwlwifi 0000:04:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm [ 9.305302] Non-volatile memory driver v1.3 [ 9.311114] cryptd: max_cpu_qlen set to 1000 [ 9.320025] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 9.334264] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 9.334265] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 9.334266] thinkpad_acpi: ThinkPad BIOS N1CET66W (1.34 ), EC unknown [ 9.334267] thinkpad_acpi: Lenovo ThinkPad T460s, model 20F9004FUS [ 9.337907] thinkpad_acpi: radio switch found; radios are enabled [ 9.337937] random: crng init done [ 9.337938] random: 7 urandom warning(s) missed due to ratelimiting [ 9.338192] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 9.338193] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 9.348523] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 9.353616] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 9.362891] AVX2 version of gcm_enc/dec engaged. [ 9.362893] AES CTR mode by8 optimization enabled [ 9.365282] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 9.376528] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 9.378952] thinkpad_acpi: battery 2 registered (start 55, stop 80) [ 9.385278] thinkpad_acpi: battery 1 registered (start 55, stop 80) [ 9.385283] battery: new extension: ThinkPad Battery Extension [ 9.385338] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 9.394555] iwlwifi 0000:04:00.0: base HW address: 44:85:00:c8:18:51 [ 9.425426] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.425430] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.425432] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 9.425433] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.425435] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.425436] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 9.425438] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a [ 9.425440] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 9.483192] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 9.483253] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 9.483309] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 9.483371] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 9.483422] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 9.483476] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 9.483526] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 9.483583] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 9.483634] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 9.489745] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.490040] thermal thermal_zone2: failed to read out thermal zone (-61) [ 9.509509] intel_rapl: Found RAPL domain package [ 9.509510] intel_rapl: Found RAPL domain core [ 9.509511] intel_rapl: Found RAPL domain uncore [ 9.509512] intel_rapl: Found RAPL domain dram [ 9.576360] psmouse serio2: Failed to deactivate mouse on synaptics-pt/serio0: -5 [ 9.666303] Adding 8388604k swap on /dev/sda2. Priority:-2 extents:1 across:8388604k SSFS [ 9.720387] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 9.773283] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard,commit=500 [ 10.025527] audit: type=1400 audit(1542388371.968:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=838 comm="apparmor_parser" [ 10.025531] audit: type=1400 audit(1542388371.968:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=838 comm="apparmor_parser" [ 10.027204] audit: type=1400 audit(1542388371.968:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=837 comm="apparmor_parser" [ 10.027208] audit: type=1400 audit(1542388371.968:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=837 comm="apparmor_parser" [ 10.027210] audit: type=1400 audit(1542388371.968:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=837 comm="apparmor_parser" [ 10.027211] audit: type=1400 audit(1542388371.968:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=837 comm="apparmor_parser" [ 10.028493] audit: type=1400 audit(1542388371.972:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=836 comm="apparmor_parser" [ 10.028497] audit: type=1400 audit(1542388371.972:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=836 comm="apparmor_parser" [ 10.038879] audit: type=1400 audit(1542388371.980:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=841 comm="apparmor_parser" [ 10.038882] audit: type=1400 audit(1542388371.980:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=841 comm="apparmor_parser" [ 10.120512] new mount options do not match the existing superblock, will be ignored [ 10.722419] usbcore: registered new interface driver usbserial_generic [ 10.722428] usbserial: USB Serial support registered for generic [ 10.723408] media: Linux media interface: v0.10 [ 10.732104] videodev: Linux video capture interface: v2.00 [ 10.734226] usbcore: registered new interface driver cdc_ncm [ 10.736826] usbcore: registered new interface driver qcserial [ 10.736837] usbserial: USB Serial support registered for Qualcomm USB modem [ 10.737746] qcserial 1-2:1.0: Qualcomm USB modem converter detected [ 10.737863] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 10.739042] qcserial 1-2:1.2: Qualcomm USB modem converter detected [ 10.739118] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [ 10.740221] qcserial 1-2:1.3: Qualcomm USB modem converter detected [ 10.740281] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [ 10.746596] Bluetooth: Core ver 2.22 [ 10.746610] NET: Registered protocol family 31 [ 10.746611] Bluetooth: HCI device and connection manager initialized [ 10.746614] Bluetooth: HCI socket layer initialized [ 10.746617] Bluetooth: L2CAP socket layer initialized [ 10.746622] Bluetooth: SCO socket layer initialized [ 10.748716] usbcore: registered new interface driver cdc_wdm [ 10.813373] cdc_mbim 1-2:1.12: cdc-wdm0: USB WDM device [ 10.813550] cdc_mbim 1-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, b6:10:d4:25:bb:c8 [ 10.813592] usbcore: registered new interface driver cdc_mbim [ 10.815353] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: renamed from wwan0 [ 10.908287] usbcore: registered new interface driver btusb [ 10.908668] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 10.914675] Bluetooth: hci0: Device revision is 5 [ 10.914676] Bluetooth: hci0: Secure boot is enabled [ 10.914677] Bluetooth: hci0: OTP lock is enabled [ 10.914677] Bluetooth: hci0: API lock is enabled [ 10.914678] Bluetooth: hci0: Debug lock is disabled [ 10.914679] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 10.917003] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0706) [ 10.934809] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized! [ 10.934812] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized! [ 10.934813] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized! [ 10.934815] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized! [ 10.934913] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18 [ 10.935028] usbcore: registered new interface driver uvcvideo [ 10.935029] USB Video Class driver (1.1.1) [ 10.996154] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 11.316944] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.316946] Bluetooth: BNEP filters: protocol multicast [ 11.316949] Bluetooth: BNEP socket layer initialized [ 12.321534] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 12.370451] Bluetooth: hci0: Waiting for firmware download to complete [ 12.370652] Bluetooth: hci0: Firmware loaded in 1428114 usecs [ 12.370690] Bluetooth: hci0: Waiting for device to boot [ 12.382654] Bluetooth: hci0: Device booted in 11695 usecs [ 12.498741] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 12.502657] Bluetooth: hci0: Applying Intel DDC parameters completed [ 12.512616] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 12.520912] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 12.762975] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 13.016371] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 13.403707] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 16.919157] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 17.827549] wlp4s0: authenticate with 06:8d:db:6f:e0:6f [ 17.840602] wlp4s0: send auth to 06:8d:db:6f:e0:6f (try 1/3) [ 17.845861] wlp4s0: authenticated [ 17.848017] wlp4s0: associate with 06:8d:db:6f:e0:6f (try 1/3) [ 17.852339] wlp4s0: RX AssocResp from 06:8d:db:6f:e0:6f (capab=0x1421 status=0 aid=2) [ 17.856815] wlp4s0: associated [ 17.857861] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 17.955310] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 06:8d:db:6f:e0:6f [ 18.641235] vboxdrv: loading out-of-tree module taints kernel. [ 18.641403] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 18.650203] vboxdrv: Found 4 processor cores [ 18.668167] vboxdrv: TSC mode is Invariant, tentative frequency 2399998755 Hz [ 18.668168] vboxdrv: Successfully loaded version 5.2.18_Ubuntu (interface 0x00290001) [ 18.683275] VBoxNetFlt: Successfully started. [ 18.692518] VBoxNetAdp: Successfully started. [ 18.699223] VBoxPciLinuxInit [ 18.702257] vboxpci: IOMMU not found (not registered) [ 187.465786] Bluetooth: RFCOMM TTY layer initialized [ 187.465795] Bluetooth: RFCOMM socket layer initialized [ 187.465802] Bluetooth: RFCOMM ver 1.11 [ 189.942170] kauditd_printk_skb: 39 callbacks suppressed [ 189.942172] audit: type=1400 audit(1542388551.398:51): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/tmp/jojo-cache/fontconfig/eefa98db-53b9-475b-ac20-684931432249-le64.cache-7" pid=3543 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1001 ouid=1001 [ 189.942212] audit: type=1400 audit(1542388551.398:52): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/tmp/jojo-cache/fontconfig/eefa98db-53b9-475b-ac20-684931432249-le64.cache-7" pid=3543 comm="evince-thumbnai" requested_mask="wr" denied_mask="wr" fsuid=1001 ouid=1001 [ 189.947654] audit: type=1400 audit(1542388551.402:53): apparmor="DENIED" operation="chmod" profile="/usr/bin/evince-thumbnailer" name="/var/cache/fontconfig/" pid=3543 comm="evince-thumbnai" requested_mask="w" denied_mask="w" fsuid=1001 ouid=0 [ 189.947711] audit: type=1400 audit(1542388551.402:54): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/tmp/jojo-cache/fontconfig/eefa98db-53b9-475b-ac20-684931432249-le64.cache-7.TMP-CmhITP" pid=3543 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1001 ouid=1001 [ 189.968175] audit: type=1400 audit(1542388551.426:55): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/tmp/.mate_desktop_thumbnail.IF1ESZ" pid=3543 comm="evince-thumbnai" requested_mask="wc" denied_mask="wc" fsuid=1001 ouid=1001 [ 434.989058] usb 1-3: new full-speed USB device number 6 using xhci_hcd [ 435.140429] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03 [ 435.140434] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 435.140438] usb 1-3: Product: USB Receiver [ 435.140483] usb 1-3: Manufacturer: Logitech [ 435.721122] hidraw: raw HID events driver (C) Jiri Kosina [ 435.727679] usbcore: registered new interface driver usbhid [ 435.727681] usbhid: USB HID core driver [ 435.736613] logitech-djreceiver 0003:046D:C52B.0003: hiddev1,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 [ 435.860463] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input19 [ 435.860864] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-3:1 [ 435.935984] input: Logitech M570 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input23 [ 435.936391] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:14.0-3:1 [ 441.340311] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected. [ 3362.389398] wlp4s0: deauthenticating from 06:8d:db:6f:e0:6f by local choice (Reason: 3=DEAUTH_LEAVING) [ 3362.414652] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 3365.419819] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 3366.341657] wlp4s0: authenticate with f4:f2:6d:92:c3:44 [ 3366.348829] wlp4s0: send auth to f4:f2:6d:92:c3:44 (try 1/3) [ 3366.352974] wlp4s0: authenticated [ 3366.355561] wlp4s0: associate with f4:f2:6d:92:c3:44 (try 1/3) [ 3366.368135] wlp4s0: RX AssocResp from f4:f2:6d:92:c3:44 (capab=0x1431 status=0 aid=4) [ 3366.370771] wlp4s0: associated [ 3366.463031] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f4:f2:6d:92:c3:44 [ 3366.463553] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [20863.322897] e1000e: enp0s31f6 NIC Link is Down [20863.396451] wlp4s0: deauthenticating from f4:f2:6d:92:c3:44 by local choice (Reason: 3=DEAUTH_LEAVING) [20863.449146] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20863.742672] PM: suspend entry (deep) [20863.742674] PM: Syncing filesystems ... done. [20863.781550] Freezing user space processes ... (elapsed 0.002 seconds) done. [20863.783594] OOM killer disabled. [20863.783595] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [20863.784981] Suspending console(s) (use no_console_suspend to debug) [20863.808271] sd 1:0:0:0: [sda] Synchronizing SCSI cache [20863.816173] sd 1:0:0:0: [sda] Stopping disk [20863.997573] e1000e: EEE TX LPI TIMER: 00000011 [20865.297437] ACPI: EC: interrupt blocked [20865.336956] ACPI: Preparing to enter system sleep state S3 [20865.341356] ACPI: EC: event blocked [20865.341357] ACPI: EC: EC stopped [20865.341358] PM: Saving platform NVS memory [20865.341362] Disabling non-boot CPUs ... [20865.356754] IRQ 126: no longer affine to CPU1 [20865.357763] smpboot: CPU 1 is now offline [20865.381926] smpboot: CPU 2 is now offline [20865.412784] IRQ 122: no longer affine to CPU3 [20865.412797] IRQ 128: no longer affine to CPU3 [20865.413810] smpboot: CPU 3 is now offline [20865.422598] ACPI: Low-level resume complete [20865.422678] ACPI: EC: EC started [20865.422679] PM: Restoring platform NVS memory [20865.424746] Enabling non-boot CPUs ... [20865.424813] x86: Booting SMP configuration: [20865.424814] smpboot: Booting Node 0 Processor 1 APIC 0x2 [20865.426593] cache: parent cpu1 should not be sleeping [20865.426802] CPU1 is up [20865.426842] smpboot: Booting Node 0 Processor 2 APIC 0x1 [20865.427315] cache: parent cpu2 should not be sleeping [20865.427534] CPU2 is up [20865.427583] smpboot: Booting Node 0 Processor 3 APIC 0x3 [20865.428016] cache: parent cpu3 should not be sleeping [20865.428255] CPU3 is up [20865.431669] ACPI: Waking up from system sleep state S3 [20865.445763] ACPI: EC: interrupt unblocked [20865.502856] sd 1:0:0:0: [sda] Starting disk [20865.503044] ACPI: EC: event unblocked [20865.751872] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [20865.823453] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [20865.824355] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [20865.824357] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [20865.825038] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [20865.827526] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [20865.827528] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [20865.828157] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [20865.829592] ata2.00: configured for UDMA/133 [20866.028217] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [20866.176363] usb 1-2: device firmware changed [20866.304741] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [20866.318586] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762] [20866.354530] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..] [20866.580606] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [20868.427309] OOM killer enabled. [20868.427312] Restarting tasks ... [20868.427439] usb 1-2: USB disconnect, device number 2 [20868.432160] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [20868.432179] qcserial 1-2:1.0: device disconnected [20868.432335] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [20868.432350] qcserial 1-2:1.2: device disconnected [20868.432463] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [20868.432477] qcserial 1-2:1.3: device disconnected [20868.432525] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM [20868.439776] done. [20868.446371] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [20868.450772] thermal thermal_zone2: failed to read out thermal zone (-61) [20868.452425] Bluetooth: hci0: Device revision is 5 [20868.452427] Bluetooth: hci0: Secure boot is enabled [20868.452428] Bluetooth: hci0: OTP lock is enabled [20868.452429] Bluetooth: hci0: API lock is enabled [20868.452429] Bluetooth: hci0: Debug lock is disabled [20868.452431] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [20868.452435] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [20868.607791] usb 1-2: new high-speed USB device number 7 using xhci_hcd [20868.675805] PM: suspend exit [20868.756100] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [20868.756103] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [20868.756550] usb 1-2: New USB device found, idVendor=1199, idProduct=9078, bcdDevice= 0.00 [20868.756553] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20868.756555] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm [20868.756557] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [20868.756558] usb 1-2: SerialNumber: LF63671431041014 [20868.757604] usb 1-3: USB disconnect, device number 6 [20869.086965] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [20869.123941] usb 1-2: USB disconnect, device number 7 [20869.272044] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [20869.277636] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20869.531410] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20869.798793] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20869.894900] Bluetooth: hci0: Waiting for firmware download to complete [20869.895401] Bluetooth: hci0: Firmware loaded in 1433642 usecs [20869.895423] Bluetooth: hci0: Waiting for device to boot [20869.907410] Bluetooth: hci0: Device booted in 11721 usecs [20869.907414] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [20869.911420] Bluetooth: hci0: Applying Intel DDC parameters completed [20870.200198] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20873.738434] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20874.824842] wlp4s0: authenticate with 60:e3:27:ae:d0:79 [20874.835099] wlp4s0: send auth to 60:e3:27:ae:d0:79 (try 1/3) [20874.847004] wlp4s0: authenticated [20874.848099] wlp4s0: associate with 60:e3:27:ae:d0:79 (try 1/3) [20874.864895] wlp4s0: RX AssocResp from 60:e3:27:ae:d0:79 (capab=0x1011 status=0 aid=4) [20874.867468] wlp4s0: associated [20874.900782] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [20874.919486] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:e3:27:ae:d0:79 [20878.888162] usb 1-2: new high-speed USB device number 8 using xhci_hcd [20879.036882] usb 1-2: config 1 has an invalid interface number: 12 but max is 4 [20879.036885] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [20879.036887] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [20879.036888] usb 1-2: config 1 has no interface number 1 [20879.036890] usb 1-2: config 1 has no interface number 4 [20879.037382] usb 1-2: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06 [20879.037384] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20879.037386] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A [20879.037388] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [20879.037389] usb 1-2: SerialNumber: LF63671431041014 [20879.041126] qcserial 1-2:1.0: Qualcomm USB modem converter detected [20879.041218] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [20879.042291] qcserial 1-2:1.2: Qualcomm USB modem converter detected [20879.042364] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [20879.043505] qcserial 1-2:1.3: Qualcomm USB modem converter detected [20879.043578] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [20879.065237] cdc_mbim 1-2:1.12: cdc-wdm0: USB WDM device [20879.065444] cdc_mbim 1-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, b6:10:d4:25:bb:c8 [20879.628084] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: renamed from wwan0 [21423.942772] e1000e: enp0s31f6 NIC Link is Down [21424.029354] wlp4s0: deauthenticating from 60:e3:27:ae:d0:79 by local choice (Reason: 3=DEAUTH_LEAVING) [21424.059285] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21424.248753] PM: suspend entry (deep) [21424.248754] PM: Syncing filesystems ... done. [21424.266222] Freezing user space processes ... (elapsed 0.002 seconds) done. [21424.268507] OOM killer disabled. [21424.268507] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [21424.270119] Suspending console(s) (use no_console_suspend to debug) [21424.288950] sd 1:0:0:0: [sda] Synchronizing SCSI cache [21424.291099] sd 1:0:0:0: [sda] Stopping disk [21424.472164] e1000e: EEE TX LPI TIMER: 00000011 [21425.789995] ACPI: EC: interrupt blocked [21425.829130] ACPI: Preparing to enter system sleep state S3 [21425.835213] ACPI: EC: event blocked [21425.835215] ACPI: EC: EC stopped [21425.835216] PM: Saving platform NVS memory [21425.835223] Disabling non-boot CPUs ... [21425.848552] IRQ 126: no longer affine to CPU1 [21425.850278] smpboot: CPU 1 is now offline [21425.882199] smpboot: CPU 2 is now offline [21425.904408] IRQ 122: no longer affine to CPU3 [21425.904420] IRQ 128: no longer affine to CPU3 [21425.905431] smpboot: CPU 3 is now offline [21425.914881] ACPI: Low-level resume complete [21425.915092] ACPI: EC: EC started [21425.915094] PM: Restoring platform NVS memory [21425.925420] Enabling non-boot CPUs ... [21425.925822] x86: Booting SMP configuration: [21425.925828] smpboot: Booting Node 0 Processor 1 APIC 0x2 [21425.937023] cache: parent cpu1 should not be sleeping [21425.937936] CPU1 is up [21425.938039] smpboot: Booting Node 0 Processor 2 APIC 0x1 [21425.940647] cache: parent cpu2 should not be sleeping [21425.941688] CPU2 is up [21425.941821] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21425.944139] cache: parent cpu3 should not be sleeping [21425.945224] CPU3 is up [21425.964527] ACPI: Waking up from system sleep state S3 [21426.007063] ACPI: EC: interrupt unblocked [21426.071729] sd 1:0:0:0: [sda] Starting disk [21426.072709] ACPI: EC: event unblocked [21426.315393] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [21426.386955] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [21426.388402] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21426.388417] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21426.389167] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [21426.392360] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21426.392375] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21426.393118] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [21426.394791] ata2.00: configured for UDMA/133 [21426.591970] usb 1-2: reset high-speed USB device number 8 using xhci_hcd [21426.739163] usb 1-2: device firmware changed [21426.844140] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762] [21426.867557] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [21426.880539] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..] [21427.143830] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [21427.301464] OOM killer enabled. [21427.301467] Restarting tasks ... [21427.301581] usb 1-2: USB disconnect, device number 8 [21427.302727] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [21427.305805] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [21427.305828] qcserial 1-2:1.0: device disconnected [21427.309676] Bluetooth: hci0: Device revision is 5 [21427.309678] Bluetooth: hci0: Secure boot is enabled [21427.309679] Bluetooth: hci0: OTP lock is enabled [21427.309680] Bluetooth: hci0: API lock is enabled [21427.309681] Bluetooth: hci0: Debug lock is disabled [21427.309683] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [21427.309944] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [21427.310742] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [21427.310762] qcserial 1-2:1.2: device disconnected [21427.310928] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [21427.310942] qcserial 1-2:1.3: device disconnected [21427.310991] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM [21427.354180] done. [21427.355534] thermal thermal_zone2: failed to read out thermal zone (-61) [21427.427407] PM: suspend exit [21427.470677] usb 1-2: new high-speed USB device number 9 using xhci_hcd [21427.619091] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [21427.619094] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [21427.619507] usb 1-2: New USB device found, idVendor=1199, idProduct=9078, bcdDevice= 0.00 [21427.619509] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21427.619511] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm [21427.619513] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [21427.619514] usb 1-2: SerialNumber: LF63671431041014 [21427.678708] usb 1-2: USB disconnect, device number 9 [21427.736771] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [21427.939131] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [21427.947285] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21428.204273] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21428.489552] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21428.652162] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21428.782146] Bluetooth: hci0: Waiting for firmware download to complete [21428.782661] Bluetooth: hci0: Firmware loaded in 1446846 usecs [21428.782752] Bluetooth: hci0: Waiting for device to boot [21428.794686] Bluetooth: hci0: Device booted in 11685 usecs [21428.794734] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [21428.798698] Bluetooth: hci0: Applying Intel DDC parameters completed [21432.320550] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21433.969414] wlp4s0: authenticate with 60:e3:27:ae:d0:79 [21433.980556] wlp4s0: send auth to 60:e3:27:ae:d0:79 (try 1/3) [21433.990237] wlp4s0: authenticated [21433.993625] wlp4s0: associate with 60:e3:27:ae:d0:79 (try 1/3) [21434.001276] wlp4s0: RX AssocResp from 60:e3:27:ae:d0:79 (capab=0x1011 status=0 aid=5) [21434.003631] wlp4s0: associated [21434.033302] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:e3:27:ae:d0:79 [21434.042451] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [21437.758688] usb 1-2: new high-speed USB device number 10 using xhci_hcd [21437.913685] usb 1-2: config 1 has an invalid interface number: 12 but max is 4 [21437.913689] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [21437.913692] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [21437.913694] usb 1-2: config 1 has no interface number 1 [21437.913697] usb 1-2: config 1 has no interface number 4 [21437.914242] usb 1-2: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06 [21437.914245] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21437.914247] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A [21437.914249] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [21437.914252] usb 1-2: SerialNumber: LF63671431041014 [21437.921302] qcserial 1-2:1.0: Qualcomm USB modem converter detected [21437.921428] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [21437.922660] qcserial 1-2:1.2: Qualcomm USB modem converter detected [21437.922767] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [21437.923950] qcserial 1-2:1.3: Qualcomm USB modem converter detected [21437.924059] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [21437.946292] cdc_mbim 1-2:1.12: cdc-wdm0: USB WDM device [21437.946610] cdc_mbim 1-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, b6:10:d4:25:bb:c8 [21438.657942] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: renamed from wwan0 [21447.771643] e1000e: enp0s31f6 NIC Link is Down [21447.857607] wlp4s0: deauthenticating from 60:e3:27:ae:d0:79 by local choice (Reason: 3=DEAUTH_LEAVING) [21447.905870] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21448.372072] PM: suspend entry (deep) [21448.372074] PM: Syncing filesystems ... done. [21448.394243] Freezing user space processes ... (elapsed 0.002 seconds) done. [21448.396366] OOM killer disabled. [21448.396366] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [21448.398024] Suspending console(s) (use no_console_suspend to debug) [21448.420268] sd 1:0:0:0: [sda] Synchronizing SCSI cache [21448.422513] sd 1:0:0:0: [sda] Stopping disk [21448.595732] e1000e: EEE TX LPI TIMER: 00000011 [21449.889627] ACPI: EC: interrupt blocked [21449.933335] ACPI: Preparing to enter system sleep state S3 [21449.939793] ACPI: EC: event blocked [21449.939795] ACPI: EC: EC stopped [21449.939796] PM: Saving platform NVS memory [21449.939804] Disabling non-boot CPUs ... [21449.952697] IRQ 126: no longer affine to CPU1 [21449.953716] smpboot: CPU 1 is now offline [21449.977623] smpboot: CPU 2 is now offline [21450.008490] IRQ 122: no longer affine to CPU3 [21450.008504] IRQ 128: no longer affine to CPU3 [21450.009516] smpboot: CPU 3 is now offline [21450.019231] ACPI: Low-level resume complete [21450.019442] ACPI: EC: EC started [21450.019444] PM: Restoring platform NVS memory [21450.029759] Enabling non-boot CPUs ... [21450.029970] x86: Booting SMP configuration: [21450.029975] smpboot: Booting Node 0 Processor 1 APIC 0x2 [21450.041224] cache: parent cpu1 should not be sleeping [21450.042150] CPU1 is up [21450.042251] smpboot: Booting Node 0 Processor 2 APIC 0x1 [21450.044841] cache: parent cpu2 should not be sleeping [21450.045883] CPU2 is up [21450.046161] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21450.048545] cache: parent cpu3 should not be sleeping [21450.049624] CPU3 is up [21450.068854] ACPI: Waking up from system sleep state S3 [21450.109638] ACPI: EC: interrupt unblocked [21450.168272] sd 1:0:0:0: [sda] Starting disk [21450.169283] ACPI: EC: event unblocked [21450.415355] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [21450.482426] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [21450.484139] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21450.484154] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21450.484889] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [21450.488121] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21450.488137] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21450.488872] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [21450.490567] ata2.00: configured for UDMA/133 [21450.691963] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [21450.947991] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762] [21450.967931] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [21450.983881] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..] [21451.244556] usb 1-2: reset high-speed USB device number 10 using xhci_hcd [21451.391866] usb 1-2: device firmware changed [21451.393504] OOM killer enabled. [21451.393506] Restarting tasks ... [21451.393717] usb 1-2: USB disconnect, device number 10 [21451.394364] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [21451.398289] cdc_mbim 1-2:1.12: Tx URB error: -19 [21451.401348] Bluetooth: hci0: Device revision is 5 [21451.401350] Bluetooth: hci0: Secure boot is enabled [21451.401351] Bluetooth: hci0: OTP lock is enabled [21451.401351] Bluetooth: hci0: API lock is enabled [21451.401352] Bluetooth: hci0: Debug lock is disabled [21451.401353] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [21451.401357] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [21451.407037] qcserial ttyUSB0: usb_wwan_open: submit read urb 0 failed: -19 [21451.407043] qcserial ttyUSB0: usb_wwan_open: submit read urb 1 failed: -19 [21451.407046] qcserial ttyUSB0: usb_wwan_open: submit read urb 2 failed: -19 [21451.407049] qcserial ttyUSB0: usb_wwan_open: submit read urb 3 failed: -19 [21451.407485] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [21451.407503] qcserial 1-2:1.0: device disconnected [21451.407646] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [21451.407659] qcserial 1-2:1.2: device disconnected [21451.407789] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [21451.407803] qcserial 1-2:1.3: device disconnected [21451.407853] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM [21451.408138] done. [21451.411632] thermal thermal_zone2: failed to read out thermal zone (-61) [21451.562916] usb 1-2: new high-speed USB device number 11 using xhci_hcd [21451.576873] PM: suspend exit [21451.711192] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [21451.711195] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [21451.711631] usb 1-2: New USB device found, idVendor=1199, idProduct=9078, bcdDevice= 0.00 [21451.711634] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21451.711636] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm [21451.711637] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [21451.711639] usb 1-2: SerialNumber: LF63671431041014 [21451.770917] usb 1-2: USB disconnect, device number 11 [21451.806809] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [21452.003184] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [21452.006197] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21452.258815] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21452.525587] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21452.846354] Bluetooth: hci0: Waiting for firmware download to complete [21452.846357] Bluetooth: hci0: Firmware loaded in 1418909 usecs [21452.846378] Bluetooth: hci0: Waiting for device to boot [21452.858326] Bluetooth: hci0: Device booted in 11684 usecs [21452.858330] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [21452.862336] Bluetooth: hci0: Applying Intel DDC parameters completed [21452.894058] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21456.435641] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [21457.892903] wlp4s0: authenticate with 60:e3:27:ae:d0:79 [21457.904890] wlp4s0: send auth to 60:e3:27:ae:d0:79 (try 1/3) [21457.913797] wlp4s0: authenticated [21457.918430] wlp4s0: associate with 60:e3:27:ae:d0:79 (try 1/3) [21457.926359] wlp4s0: RX AssocResp from 60:e3:27:ae:d0:79 (capab=0x1011 status=0 aid=5) [21457.928337] wlp4s0: associated [21457.964688] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [21457.992245] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:e3:27:ae:d0:79 [21461.842104] usb 1-2: new high-speed USB device number 12 using xhci_hcd [21461.991163] usb 1-2: config 1 has an invalid interface number: 12 but max is 4 [21461.991166] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [21461.991167] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [21461.991169] usb 1-2: config 1 has no interface number 1 [21461.991171] usb 1-2: config 1 has no interface number 4 [21461.991855] usb 1-2: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06 [21461.991858] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21461.991860] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A [21461.991861] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [21461.991863] usb 1-2: SerialNumber: LF63671431041014 [21461.996528] qcserial 1-2:1.0: Qualcomm USB modem converter detected [21461.996643] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [21461.997810] qcserial 1-2:1.2: Qualcomm USB modem converter detected [21461.997911] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [21461.999253] qcserial 1-2:1.3: Qualcomm USB modem converter detected [21461.999347] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [21462.019235] cdc_mbim 1-2:1.12: cdc-wdm0: USB WDM device [21462.019546] cdc_mbim 1-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, b6:10:d4:25:bb:c8 [21462.630982] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: renamed from wwan0 [27245.843556] e1000e: enp0s31f6 NIC Link is Down [27245.902309] wlp4s0: deauthenticating from 60:e3:27:ae:d0:79 by local choice (Reason: 3=DEAUTH_LEAVING) [27245.978419] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27246.414580] PM: suspend entry (deep) [27246.414582] PM: Syncing filesystems ... done. [27246.439005] Freezing user space processes ... (elapsed 0.002 seconds) done. [27246.441372] OOM killer disabled. [27246.441372] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [27246.442271] Suspending console(s) (use no_console_suspend to debug) [27246.466107] sd 1:0:0:0: [sda] Synchronizing SCSI cache [27246.467679] sd 1:0:0:0: [sda] Stopping disk [27246.637856] e1000e: EEE TX LPI TIMER: 00000011 [27247.948025] ACPI: EC: interrupt blocked [27247.991158] ACPI: Preparing to enter system sleep state S3 [27247.997151] ACPI: EC: event blocked [27247.997152] ACPI: EC: EC stopped [27247.997154] PM: Saving platform NVS memory [27247.997161] Disabling non-boot CPUs ... [27248.010595] IRQ 126: no longer affine to CPU1 [27248.011611] smpboot: CPU 1 is now offline [27248.048241] smpboot: CPU 2 is now offline [27248.074450] IRQ 122: no longer affine to CPU3 [27248.074464] IRQ 128: no longer affine to CPU3 [27248.075484] smpboot: CPU 3 is now offline [27248.085604] ACPI: Low-level resume complete [27248.085815] ACPI: EC: EC started [27248.085818] PM: Restoring platform NVS memory [27248.096132] Enabling non-boot CPUs ... [27248.096279] x86: Booting SMP configuration: [27248.096285] smpboot: Booting Node 0 Processor 1 APIC 0x2 [27248.107509] cache: parent cpu1 should not be sleeping [27248.108419] CPU1 is up [27248.108593] smpboot: Booting Node 0 Processor 2 APIC 0x1 [27248.111065] cache: parent cpu2 should not be sleeping [27248.112091] CPU2 is up [27248.112300] smpboot: Booting Node 0 Processor 3 APIC 0x3 [27248.114654] cache: parent cpu3 should not be sleeping [27248.115744] CPU3 is up [27248.135013] ACPI: Waking up from system sleep state S3 [27248.175498] ACPI: EC: interrupt unblocked [27248.234154] ACPI: EC: event unblocked [27248.234260] sd 1:0:0:0: [sda] Starting disk [27248.477522] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [27248.552952] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [27248.554644] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27248.554660] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27248.555399] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27248.558568] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27248.558586] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27248.559242] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27248.560781] ata2.00: configured for UDMA/133 [27248.758002] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [27249.003155] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762] [27249.034239] usb 1-2: reset high-speed USB device number 12 using xhci_hcd [27249.038908] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..] [27249.181393] usb 1-2: device firmware changed [27249.309934] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [27249.469381] OOM killer enabled. [27249.469384] Restarting tasks ... [27249.469401] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [27249.469590] usb 1-2: USB disconnect, device number 12 [27249.474495] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [27249.474516] qcserial 1-2:1.0: device disconnected [27249.476351] Bluetooth: hci0: Device revision is 5 [27249.476353] Bluetooth: hci0: Secure boot is enabled [27249.476354] Bluetooth: hci0: OTP lock is enabled [27249.476355] Bluetooth: hci0: API lock is enabled [27249.476355] Bluetooth: hci0: Debug lock is disabled [27249.476357] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [27249.476637] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [27249.476714] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [27249.476734] qcserial 1-2:1.2: device disconnected [27249.476885] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [27249.476899] qcserial 1-2:1.3: device disconnected [27249.476953] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM [27249.533603] done. [27249.536005] thermal thermal_zone2: failed to read out thermal zone (-61) [27249.601225] PM: suspend exit [27249.641028] usb 1-2: new high-speed USB device number 13 using xhci_hcd [27249.789309] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [27249.789312] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [27249.789760] usb 1-2: New USB device found, idVendor=1199, idProduct=9078, bcdDevice= 0.00 [27249.789762] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [27249.789764] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm [27249.789765] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [27249.789767] usb 1-2: SerialNumber: LF63671431041014 [27249.849042] usb 1-2: USB disconnect, device number 13 [27249.983479] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [27250.173807] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [27250.181443] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27250.435352] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27250.702872] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27250.862267] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27250.938891] Bluetooth: hci0: Waiting for firmware download to complete [27250.939344] Bluetooth: hci0: Firmware loaded in 1436341 usecs [27250.939461] Bluetooth: hci0: Waiting for device to boot [27250.951482] Bluetooth: hci0: Device booted in 11771 usecs [27250.951548] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [27250.955513] Bluetooth: hci0: Applying Intel DDC parameters completed [27254.519074] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27255.918188] wlp4s0: authenticate with 60:e3:27:ae:d0:79 [27255.926685] wlp4s0: send auth to 60:e3:27:ae:d0:79 (try 1/3) [27255.935004] wlp4s0: authenticated [27255.937393] wlp4s0: associate with 60:e3:27:ae:d0:79 (try 1/3) [27255.950178] wlp4s0: RX AssocResp from 60:e3:27:ae:d0:79 (capab=0x1011 status=0 aid=6) [27255.952400] wlp4s0: associated [27255.986997] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [27256.018382] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:e3:27:ae:d0:79 [27259.857196] usb 1-2: new high-speed USB device number 14 using xhci_hcd [27260.006152] usb 1-2: config 1 has an invalid interface number: 12 but max is 4 [27260.006155] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [27260.006157] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [27260.006158] usb 1-2: config 1 has no interface number 1 [27260.006160] usb 1-2: config 1 has no interface number 4 [27260.006656] usb 1-2: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06 [27260.006658] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [27260.006660] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A [27260.006662] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [27260.006664] usb 1-2: SerialNumber: LF63671431041014 [27260.011489] qcserial 1-2:1.0: Qualcomm USB modem converter detected [27260.011601] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [27260.012782] qcserial 1-2:1.2: Qualcomm USB modem converter detected [27260.012943] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [27260.014292] qcserial 1-2:1.3: Qualcomm USB modem converter detected [27260.014455] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [27260.034325] cdc_mbim 1-2:1.12: cdc-wdm0: USB WDM device [27260.034646] cdc_mbim 1-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, b6:10:d4:25:bb:c8 [27260.613136] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: renamed from wwan0 [27580.871813] e1000e: enp0s31f6 NIC Link is Down [27580.918046] wlp4s0: deauthenticating from 60:e3:27:ae:d0:79 by local choice (Reason: 3=DEAUTH_LEAVING) [27580.966244] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27581.303169] PM: suspend entry (deep) [27581.303172] PM: Syncing filesystems ... done. [27581.316730] Freezing user space processes ... (elapsed 0.002 seconds) done. [27581.319429] OOM killer disabled. [27581.319430] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [27581.320988] Suspending console(s) (use no_console_suspend to debug) [27581.341521] sd 1:0:0:0: [sda] Synchronizing SCSI cache [27581.342987] sd 1:0:0:0: [sda] Stopping disk [27581.522745] e1000e: EEE TX LPI TIMER: 00000011 [27582.834831] ACPI: EC: interrupt blocked [27582.878379] ACPI: Preparing to enter system sleep state S3 [27582.884423] ACPI: EC: event blocked [27582.884424] ACPI: EC: EC stopped [27582.884425] PM: Saving platform NVS memory [27582.884433] Disabling non-boot CPUs ... [27582.897812] IRQ 126: no longer affine to CPU1 [27582.898828] smpboot: CPU 1 is now offline [27582.923573] smpboot: CPU 2 is now offline [27582.957666] IRQ 122: no longer affine to CPU3 [27582.957679] IRQ 128: no longer affine to CPU3 [27582.958691] smpboot: CPU 3 is now offline [27582.968351] ACPI: Low-level resume complete [27582.968563] ACPI: EC: EC started [27582.968565] PM: Restoring platform NVS memory [27582.978884] Enabling non-boot CPUs ... [27582.979119] x86: Booting SMP configuration: [27582.979124] smpboot: Booting Node 0 Processor 1 APIC 0x2 [27582.990328] cache: parent cpu1 should not be sleeping [27582.991238] CPU1 is up [27582.991333] smpboot: Booting Node 0 Processor 2 APIC 0x1 [27582.993768] cache: parent cpu2 should not be sleeping [27582.994810] CPU2 is up [27582.995079] smpboot: Booting Node 0 Processor 3 APIC 0x3 [27582.997412] cache: parent cpu3 should not be sleeping [27582.998515] CPU3 is up [27583.017811] ACPI: Waking up from system sleep state S3 [27583.058454] ACPI: EC: interrupt unblocked [27583.117451] sd 1:0:0:0: [sda] Starting disk [27583.117888] ACPI: EC: event unblocked [27583.364763] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [27583.432944] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [27583.434631] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27583.434647] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27583.435379] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27583.438787] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27583.438802] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27583.439532] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [27583.441115] ata2.00: configured for UDMA/133 [27583.644811] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [27583.893664] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4762] [27583.921394] usb 1-2: reset high-speed USB device number 14 using xhci_hcd [27583.930185] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..] [27584.068501] usb 1-2: device firmware changed [27584.197778] usb 1-9: reset full-speed USB device number 5 using xhci_hcd [27584.352427] OOM killer enabled. [27584.352430] Restarting tasks ... [27584.353164] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [27584.360129] Bluetooth: hci0: Device revision is 5 [27584.360131] Bluetooth: hci0: Secure boot is enabled [27584.360132] Bluetooth: hci0: OTP lock is enabled [27584.360133] Bluetooth: hci0: API lock is enabled [27584.360134] Bluetooth: hci0: Debug lock is disabled [27584.360135] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [27584.360139] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [27584.364113] usb 1-2: USB disconnect, device number 14 [27584.364265] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [27584.364283] qcserial 1-2:1.0: device disconnected [27584.364426] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [27584.364441] qcserial 1-2:1.2: device disconnected [27584.364556] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [27584.364570] qcserial 1-2:1.3: device disconnected [27584.364618] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM [27584.366198] done. [27584.381651] thermal thermal_zone2: failed to read out thermal zone (-61) [27584.455670] PM: suspend exit [27584.532267] usb 1-2: new high-speed USB device number 15 using xhci_hcd [27584.684538] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [27584.684541] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [27584.684972] usb 1-2: New USB device found, idVendor=1199, idProduct=9078, bcdDevice= 0.00 [27584.684974] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [27584.684975] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm [27584.684976] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [27584.684977] usb 1-2: SerialNumber: LF63671431041014 [27584.718446] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [27584.752338] usb 1-2: USB disconnect, device number 15 [27584.904694] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [27584.915086] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27585.184534] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27585.462380] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27585.712222] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27585.901758] Bluetooth: hci0: Waiting for firmware download to complete [27585.902140] Bluetooth: hci0: Firmware loaded in 1514046 usecs [27585.902202] Bluetooth: hci0: Waiting for device to boot [27585.914155] Bluetooth: hci0: Device booted in 11721 usecs [27585.914165] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [27585.918220] Bluetooth: hci0: Applying Intel DDC parameters completed [27589.435443] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [27590.663685] wlp4s0: authenticate with 60:e3:27:ae:d0:79 [27590.678391] wlp4s0: send auth to 60:e3:27:ae:d0:79 (try 1/3) [27590.685066] wlp4s0: authenticated [27590.688342] wlp4s0: associate with 60:e3:27:ae:d0:79 (try 1/3) [27590.690666] wlp4s0: RX AssocResp from 60:e3:27:ae:d0:79 (capab=0x1011 status=0 aid=7) [27590.704587] wlp4s0: associated [27590.721723] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [27590.748423] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:e3:27:ae:d0:79 [27594.744273] usb 1-2: new high-speed USB device number 16 using xhci_hcd [27594.893243] usb 1-2: config 1 has an invalid interface number: 12 but max is 4 [27594.893245] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [27594.893246] usb 1-2: config 1 has an invalid interface number: 13 but max is 4 [27594.893248] usb 1-2: config 1 has no interface number 1 [27594.893249] usb 1-2: config 1 has no interface number 4 [27594.893831] usb 1-2: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06 [27594.893833] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [27594.893835] usb 1-2: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A [27594.893836] usb 1-2: Manufacturer: Sierra Wireless, Incorporated [27594.893837] usb 1-2: SerialNumber: LF63671431041014 [27594.898311] qcserial 1-2:1.0: Qualcomm USB modem converter detected [27594.898461] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [27594.899631] qcserial 1-2:1.2: Qualcomm USB modem converter detected [27594.899742] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1 [27594.900862] qcserial 1-2:1.3: Qualcomm USB modem converter detected [27594.900959] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2 [27594.921395] cdc_mbim 1-2:1.12: cdc-wdm0: USB WDM device [27594.921601] cdc_mbim 1-2:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, b6:10:d4:25:bb:c8 [27595.504377] cdc_mbim 1-2:1.12 wwp0s20f0u2i12: renamed from wwan0