[ 0.000000] microcode: microcode updated early to revision 0x2b, date = 2018-03-22 [ 0.000000] Linux version 4.18.0-10-generic (buildd@lgw01-amd64-060) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #11-Ubuntu SMP Thu Oct 11 15:13:55 UTC 2018 (Ubuntu 4.18.0-10.11-generic 4.18.12) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-10-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c9066fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9067000-0x00000000c9497fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c9498000-0x00000000db2f3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db2f4000-0x00000000db3b4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db3b5000-0x00000000db3d5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db3d6000-0x00000000dbd09fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbd0a000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc75c7018-0xc75d3857] usable ==> usable [ 0.000000] e820: update [mem 0xc75c7018-0xc75d3857] usable ==> usable [ 0.000000] e820: update [mem 0xc75bf018-0xc75c6857] usable ==> usable [ 0.000000] e820: update [mem 0xc75bf018-0xc75c6857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c75bf017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c75bf018-0x00000000c75c6857] usable [ 0.000000] reserve setup_data: [mem 0x00000000c75c6858-0x00000000c75c7017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c75c7018-0x00000000c75d3857] usable [ 0.000000] reserve setup_data: [mem 0x00000000c75d3858-0x00000000c9066fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c9067000-0x00000000c9497fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c9498000-0x00000000db2f3fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000db2f4000-0x00000000db3b4fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000db3b5000-0x00000000db3d5fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000db3d6000-0x00000000dbd09fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dbd0a000-0x00000000dbffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f7fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdb3bb000 ACPI 2.0=0xdb3bb000 SMBIOS=0xf0000 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. Inspiron 5458/09WGNT, BIOS A15 02/02/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x21f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 021F800000 mask 7FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8136M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1d55c000, 0x1d55cfff] PGTABLE [ 0.000000] BRK [0x1d55d000, 0x1d55dfff] PGTABLE [ 0.000000] BRK [0x1d55e000, 0x1d55efff] PGTABLE [ 0.000000] BRK [0x1d55f000, 0x1d55ffff] PGTABLE [ 0.000000] BRK [0x1d560000, 0x1d560fff] PGTABLE [ 0.000000] BRK [0x1d561000, 0x1d561fff] PGTABLE [ 0.000000] BRK [0x1d562000, 0x1d562fff] PGTABLE [ 0.000000] BRK [0x1d563000, 0x1d563fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3c536000-0x3fffdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DB3BB000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DB3BB090 0000A4 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DB3CE3F8 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DB3BB1C8 01322C (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DBD05F80 000040 [ 0.000000] ACPI: APIC 0x00000000DB3CE508 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DB3CE590 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DB3CE5D8 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DB3CE678 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DB3CE6B8 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DB3CE6F0 0003BD (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DB3CEAB0 000042 (v01 00000000 00000000) [ 0.000000] ACPI: ASF! 0x00000000DB3CEAF8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BOOT 0x00000000DB3CEB98 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DB3CEBC0 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB3CF0E0 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB3CFC58 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB3CFE20 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000DB3D3FD0 0000B0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000DB3D4080 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f7d3000-0x21f7fdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c9066fff] [ 0.000000] node 0: [mem 0x00000000c9498000-0x00000000db2f3fff] [ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f7fffff] [ 0.000000] Reserved but unavailable: 20896 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff] [ 0.000000] On node 0 totalpages: 2074208 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13948 pages used for memmap [ 0.000000] DMA32 zone: 892612 pages, LIFO batch:31 [ 0.000000] Normal zone: 18400 pages used for memmap [ 0.000000] Normal zone: 1177600 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low edge lint[0x13]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc75bf000-0xc75bffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc75c6000-0xc75c6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc75c7000-0xc75c7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc75d3000-0xc75d3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9067000-0xc9497fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb2f4000-0xdb3b4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb3b5000-0xdb3d5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb3d6000-0xdbd09fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbd0a000-0xdbffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2041775 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-10-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7694608K/8296832K available (12300K kernel code, 2633K rwdata, 4348K rodata, 2440K init, 2336K bss, 602224K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 40807 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x000000dbef4000 end: 0x000000dbf02fff [ 0.000000] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 1995.578 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3987ba6c008, max_idle_ns: 881590735427 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.15 BogoMIPS (lpj=7982312) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028368] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028400] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028421] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028644] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028644] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028650] mce: CPU supports 7 MCE banks [ 0.028659] CPU0: Thermal monitoring enabled (TM1) [ 0.028671] process: using mwait in idle threads [ 0.028674] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.028675] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.028677] Spectre V2 : Mitigation: Full generic retpoline [ 0.028677] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028678] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.028678] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028679] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.028777] Freeing SMP alternatives memory: 36K [ 0.043539] TSC deadline timer enabled [ 0.043542] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.043651] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.043704] ... version: 3 [ 0.043705] ... bit width: 48 [ 0.043705] ... generic registers: 4 [ 0.043706] ... value mask: 0000ffffffffffff [ 0.043707] ... max period: 00007fffffffffff [ 0.043708] ... fixed-purpose events: 3 [ 0.043708] ... event mask: 000000070000000f [ 0.043746] Hierarchical SRCU implementation. [ 0.044000] smp: Bringing up secondary CPUs ... [ 0.044000] x86: Booting SMP configuration: [ 0.044000] .... node #0, CPUs: #1 [ 0.044000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.044000] #2 #3 [ 0.044582] smp: Brought up 1 node, 4 CPUs [ 0.044582] smpboot: Max logical packages: 1 [ 0.044582] smpboot: Total of 4 processors activated (15964.62 BogoMIPS) [ 0.048261] devtmpfs: initialized [ 0.048261] x86/mm: Memory block size: 128MB [ 0.048805] PM: Registering ACPI NVS region [mem 0xdb3d6000-0xdbd09fff] (9650176 bytes) [ 0.048805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.048805] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.048805] pinctrl core: initialized pinctrl subsystem [ 0.048805] RTC time: 11:53:22, date: 10/20/18 [ 0.048805] NET: Registered protocol family 16 [ 0.048805] audit: initializing netlink subsys (disabled) [ 0.048805] audit: type=2000 audit(1540036402.048:1): state=initialized audit_enabled=0 res=1 [ 0.048805] cpuidle: using governor ladder [ 0.048805] cpuidle: using governor menu [ 0.048805] Simple Boot Flag at 0x47 set to 0x80 [ 0.048805] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.048805] ACPI: bus type PCI registered [ 0.048805] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.048805] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.048805] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.048805] PCI: Using configuration type 1 for base access [ 0.049416] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.049416] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052085] ACPI: Added _OSI(Module Device) [ 0.052086] ACPI: Added _OSI(Processor Device) [ 0.052087] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052088] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052090] ACPI: Added _OSI(Linux-Dell-Video) [ 0.052091] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.080310] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.088464] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.095133] ACPI: Dynamic OEM Table Load: [ 0.095140] ACPI: SSDT 0xFFFF8C465515AC00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.095981] ACPI: Dynamic OEM Table Load: [ 0.095987] ACPI: SSDT 0xFFFF8C46557EF800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.096895] ACPI: Dynamic OEM Table Load: [ 0.096900] ACPI: SSDT 0xFFFF8C4655074A00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.099285] ACPI: EC: EC started [ 0.099286] ACPI: EC: interrupt blocked [ 0.105740] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.105742] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0xa, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.105744] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions [ 0.105745] ACPI: Interpreter enabled [ 0.105783] ACPI: (supports S0 S3 S4 S5) [ 0.105784] ACPI: Using IOAPIC for interrupt routing [ 0.105828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.106929] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.110879] ACPI: Power Resource [PG00] (on) [ 0.111591] ACPI: Power Resource [PG01] (on) [ 0.112247] ACPI: Power Resource [PG02] (on) [ 0.137240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.137247] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.137377] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.138070] PCI host bridge to bus 0000:00 [ 0.138073] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.138075] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.138076] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.138078] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.138079] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.138081] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.138083] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.138084] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.138086] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.138087] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.138089] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.138091] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.138093] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.138102] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.138236] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.138250] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.138257] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.138262] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.138278] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.138390] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.138401] pci 0000:00:03.0: reg 0x10: [mem 0xf7214000-0xf7217fff 64bit] [ 0.138544] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.138565] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.138625] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.138735] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.138759] pci 0000:00:16.0: reg 0x10: [mem 0xf721c000-0xf721c01f 64bit] [ 0.138829] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.138972] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.138990] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit] [ 0.139042] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.139172] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.139244] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.139424] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.139497] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.139674] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.139748] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.139925] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400 [ 0.140007] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.140194] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.140216] pci 0000:00:1d.0: reg 0x10: [mem 0xf721a000-0xf721a3ff] [ 0.140304] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.140422] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100 [ 0.140642] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.140658] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.140665] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.140672] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.140679] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.140686] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.140693] pci 0000:00:1f.2: reg 0x24: [mem 0xf7219000-0xf72197ff] [ 0.140729] pci 0000:00:1f.2: PME# supported from D3hot [ 0.140831] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.140849] pci 0000:00:1f.3: reg 0x10: [mem 0xf7218000-0xf72180ff 64bit] [ 0.140870] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.141090] acpiphp: Slot [1] registered [ 0.141100] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.141209] pci 0000:06:00.0: [168c:0036] type 00 class 0x028000 [ 0.141240] pci 0000:06:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff 64bit] [ 0.141278] pci 0000:06:00.0: reg 0x30: [mem 0xf7180000-0xf718ffff pref] [ 0.141351] pci 0000:06:00.0: supports D1 D2 [ 0.141352] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141458] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.141463] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff] [ 0.141603] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000 [ 0.141639] pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.141670] pci 0000:07:00.0: reg 0x18: [mem 0xf7000000-0xf7000fff 64bit] [ 0.141689] pci 0000:07:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.141800] pci 0000:07:00.0: supports D1 D2 [ 0.141802] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.141943] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.141947] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.141950] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.141955] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.142037] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.145370] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145455] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145538] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145622] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145705] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145787] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145868] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.145950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.149641] ACPI: EC: interrupt unblocked [ 0.149663] ACPI: EC: event unblocked [ 0.149685] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0xa, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.149688] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events [ 0.149948] SCSI subsystem initialized [ 0.149963] libata version 3.00 loaded. [ 0.149963] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.149963] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.149963] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.149963] vgaarb: loaded [ 0.149963] ACPI: bus type USB registered [ 0.149963] usbcore: registered new interface driver usbfs [ 0.149963] usbcore: registered new interface driver hub [ 0.149963] usbcore: registered new device driver usb [ 0.204393] pps_core: LinuxPPS API ver. 1 registered [ 0.204393] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.204393] PTP clock support registered [ 0.204393] EDAC MC: Ver: 3.0.0 [ 0.204405] Registered efivars operations [ 0.208025] PCI: Using ACPI for IRQ routing [ 0.209368] PCI: pci_cache_line_size set to 64 bytes [ 0.209419] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.209421] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.209422] e820: reserve RAM buffer [mem 0xc75bf018-0xc7ffffff] [ 0.209423] e820: reserve RAM buffer [mem 0xc75c7018-0xc7ffffff] [ 0.209424] e820: reserve RAM buffer [mem 0xc9067000-0xcbffffff] [ 0.209425] e820: reserve RAM buffer [mem 0xdb2f4000-0xdbffffff] [ 0.209427] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff] [ 0.209531] NetLabel: Initializing [ 0.209531] NetLabel: domain hash size = 128 [ 0.209532] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.209547] NetLabel: unlabeled traffic allowed by default [ 0.209564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.209564] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.213022] clocksource: Switched to clocksource tsc-early [ 0.224382] VFS: Disk quotas dquot_6.6.0 [ 0.224397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.224517] AppArmor: AppArmor Filesystem Enabled [ 0.224547] pnp: PnP ACPI init [ 0.224842] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.224844] system 00:00: [io 0xffff] has been reserved [ 0.224846] system 00:00: [io 0xffff] has been reserved [ 0.224848] system 00:00: [io 0xffff] has been reserved [ 0.224850] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.224851] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.224853] system 00:00: [io 0xfd40-0xfd6f] has been reserved [ 0.224859] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.224921] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.224971] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.224976] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.225021] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.225044] pnp 00:04: Plug and Play ACPI device, IDs DLLd6ae PNP0f13 (active) [ 0.225279] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.225281] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.225283] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.225284] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.225286] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.225288] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.225290] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.225292] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.225294] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.225297] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.225299] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.225300] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.225305] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.225958] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.225960] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.225964] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.230202] pnp: PnP ACPI: found 7 devices [ 0.236042] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.236055] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.236058] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.236061] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 0.236086] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf800000-0xdf9fffff] [ 0.236095] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 0.236098] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.236100] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.236103] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.236107] pci 0000:00:1c.0: bridge window [mem 0xdf800000-0xdf9fffff] [ 0.236111] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 0.236116] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.236120] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff] [ 0.236127] pci 0000:00:1c.3: PCI bridge to [bus 07] [ 0.236130] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.236134] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.236137] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.236142] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.236154] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.236156] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.236157] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.236159] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.236161] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.236162] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.236164] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.236166] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.236167] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.236169] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.236170] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.236172] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window] [ 0.236174] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.236176] pci_bus 0000:04: resource 1 [mem 0xdf800000-0xdf9fffff] [ 0.236177] pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref] [ 0.236179] pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.236181] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.236182] pci_bus 0000:07: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.236184] pci_bus 0000:07: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.236367] NET: Registered protocol family 2 [ 0.236549] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.236578] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.236686] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.236807] TCP: Hash tables configured (established 65536 bind 65536) [ 0.236842] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.236866] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.236919] NET: Registered protocol family 1 [ 0.236923] NET: Registered protocol family 44 [ 0.236934] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.260164] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c4 took 22400 usecs [ 0.260184] PCI: CLS 64 bytes, default 64 [ 0.260224] Unpacking initramfs... [ 1.277031] Freeing initrd memory: 60192K [ 1.292039] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.292042] software IO TLB [mem 0xc14af000-0xc54af000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 1.292247] Scanning for low memory corruption every 60 seconds [ 1.292954] Initialise system trusted keyrings [ 1.292962] Key type blacklist registered [ 1.292998] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.294412] zbud: loaded [ 1.294967] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.295169] fuse init (API version 7.27) [ 1.295247] pstore: using deflate compression [ 1.296493] Key type asymmetric registered [ 1.296494] Asymmetric key parser 'x509' registered [ 1.296531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.296565] io scheduler noop registered [ 1.296566] io scheduler deadline registered [ 1.296593] io scheduler cfq registered (default) [ 1.297361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.297420] efifb: probing for efifb [ 1.297435] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k [ 1.297436] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.297437] efifb: scrolling: redraw [ 1.297439] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.297534] Console: switching to colour frame buffer device 170x48 [ 1.297553] fb0: EFI VGA frame buffer device [ 1.297562] intel_idle: MWAIT substates: 0x11142120 [ 1.297563] intel_idle: v0.4.1 model 0x3D [ 1.297786] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.299621] ACPI: AC Adapter [AC] (off-line) [ 1.299704] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.299716] ACPI: Lid Switch [LID0] [ 1.299749] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.299755] ACPI: Power Button [PBTN] [ 1.299788] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.299794] ACPI: Sleep Button [SBTN] [ 1.299826] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.299831] ACPI: Power Button [PWRF] [ 1.301717] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.301718] ACPI: Thermal Zone [THM] (25 C) [ 1.301885] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.303865] Linux agpgart interface v0.103 [ 1.305555] loop: module loaded [ 1.305756] libphy: Fixed MDIO Bus: probed [ 1.305757] tun: Universal TUN/TAP device driver, 1.6 [ 1.305789] PPP generic driver version 2.4.2 [ 1.305828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305831] ehci-pci: EHCI PCI platform driver [ 1.305995] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.306001] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.306012] ehci-pci 0000:00:1d.0: debug port 2 [ 1.309922] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.309939] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf721a000 [ 1.324054] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.324266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.324270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.324272] usb usb1: Product: EHCI Host Controller [ 1.324275] usb usb1: Manufacturer: Linux 4.18.0-10-generic ehci_hcd [ 1.324277] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.324539] hub 1-0:1.0: USB hub found [ 1.324555] hub 1-0:1.0: 2 ports detected [ 1.324881] ehci-platform: EHCI generic platform driver [ 1.324895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.324899] ohci-pci: OHCI PCI platform driver [ 1.324909] ohci-platform: OHCI generic platform driver [ 1.324917] uhci_hcd: USB Universal Host Controller Interface driver [ 1.325073] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.325078] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.326138] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 1.326143] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.326361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.326364] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.326365] usb usb2: Product: xHCI Host Controller [ 1.326367] usb usb2: Manufacturer: Linux 4.18.0-10-generic xhci-hcd [ 1.326368] usb usb2: SerialNumber: 0000:00:14.0 [ 1.326508] hub 2-0:1.0: USB hub found [ 1.326537] hub 2-0:1.0: 11 ports detected [ 1.357995] ACPI: Battery Slot [BAT0] (battery present) [ 1.359095] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.359099] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.359103] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.359133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.359135] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.359137] usb usb3: Product: xHCI Host Controller [ 1.359138] usb usb3: Manufacturer: Linux 4.18.0-10-generic xhci-hcd [ 1.359140] usb usb3: SerialNumber: 0000:00:14.0 [ 1.359249] hub 3-0:1.0: USB hub found [ 1.359257] hub 3-0:1.0: 4 ports detected [ 1.361244] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.383366] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.383371] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.383511] mousedev: PS/2 mouse device common for all mice [ 1.383887] rtc_cmos 00:01: RTC can wake from S4 [ 1.384043] rtc_cmos 00:01: registered as rtc0 [ 1.384060] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.384067] i2c /dev entries driver [ 1.384113] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.384190] device-mapper: uevent: version 1.0.3 [ 1.384269] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.384277] intel_pstate: Intel P-state driver initializing [ 1.384431] ledtrig-cpu: registered to indicate activity on CPUs [ 1.384434] EFI Variables Facility v0.08 2004-May-17 [ 1.387927] NET: Registered protocol family 10 [ 1.392893] Segment Routing with IPv6 [ 1.392917] NET: Registered protocol family 17 [ 1.392957] Key type dns_resolver registered [ 1.393218] RAS: Correctable Errors collector initialized. [ 1.393255] microcode: sig=0x306d4, pf=0x40, revision=0x2b [ 1.393315] microcode: Microcode Update Driver: v2.2. [ 1.393326] sched_clock: Marking stable (1393311073, 0)->(1375772722, 17538351) [ 1.393528] registered taskstats version 1 [ 1.393541] Loading compiled-in X.509 certificates [ 1.396471] Loaded X.509 cert 'Build time autogenerated kernel key: c2af9a36da7641558368c66bd9a6950ecebd7ec0' [ 1.396717] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.396745] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.397251] zswap: loaded using pool lzo/zbud [ 1.401527] Key type big_key registered [ 1.401533] Key type trusted registered [ 1.403577] Key type encrypted registered [ 1.403582] AppArmor: AppArmor sha1 policy hashing enabled [ 1.403592] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.403599] ima: Allocated hash algorithm: sha1 [ 1.403612] evm: Initialising EVM extended attributes: [ 1.403613] evm: security.selinux [ 1.403614] evm: security.SMACK64 [ 1.403615] evm: security.SMACK64EXEC [ 1.403615] evm: security.SMACK64TRANSMUTE [ 1.403616] evm: security.SMACK64MMAP [ 1.403616] evm: security.apparmor [ 1.403617] evm: security.ima [ 1.403617] evm: security.capability [ 1.403618] evm: HMAC attrs: 0x1 [ 1.404406] Magic number: 6:34:884 [ 1.404527] rtc_cmos 00:01: setting system clock to 2018-10-20 11:53:24 UTC (1540036404) [ 1.404648] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 1.407286] Freeing unused kernel image memory: 2440K [ 1.412719] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.444114] Write protecting the kernel read-only data: 20480k [ 1.444698] Freeing unused kernel image memory: 2008K [ 1.445070] Freeing unused kernel image memory: 1796K [ 1.458293] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.458293] x86/mm: Checking user space page tables [ 1.471302] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.560465] hidraw: raw HID events driver (C) Jiri Kosina [ 1.579397] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.586235] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.586248] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.586263] r8169 0000:07:00.0: enabling device (0000 -> 0003) [ 1.586962] ahci 0000:00:1f.2: version 3.0 [ 1.588202] i2c_hid i2c-DLLA6AE:00: i2c-DLLA6AE:00 supply vdd not found, using dummy regulator [ 1.588434] r8169 0000:07:00.0 eth0: RTL8106e, 84:7b:eb:e6:21:15, XID 44900000, IRQ 43 [ 1.599073] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 1.599097] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.599139] random: fast init done [ 1.599244] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.599261] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.599265] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.601168] scsi host0: ahci [ 1.604238] scsi host1: ahci [ 1.604496] ata1: SATA max UDMA/133 abar m2048@0xf7219000 port 0xf7219100 irq 44 [ 1.604513] ata2: DUMMY [ 1.615399] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 1.632596] cryptd: max_cpu_qlen set to 1000 [ 1.637291] input: DLLA6AE:00 06CB:75DD Mouse as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLLA6AE:00/0018:06CB:75DD.0001/input/input7 [ 1.637454] input: DLLA6AE:00 06CB:75DD Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLLA6AE:00/0018:06CB:75DD.0001/input/input8 [ 1.637576] hid-generic 0018:06CB:75DD.0001: input,hidraw0: I2C HID v1.00 Mouse [DLLA6AE:00 06CB:75DD] on i2c-DLLA6AE:00 [ 1.642355] AVX2 version of gcm_enc/dec engaged. [ 1.642356] AES CTR mode by8 optimization enabled [ 1.660022] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.681584] i915 0000:00:02.0: can't derive routing for PCI INT A [ 1.681586] i915 0000:00:02.0: PCI INT A: not connected [ 1.681794] checking generic (e0000000 408000) vs hw (e0000000 10000000) [ 1.681795] fb: switching to inteldrmfb from EFI VGA [ 1.681814] Console: switching to colour dummy device 80x25 [ 1.681908] [drm] Replacing VGA console driver [ 1.682834] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.682835] [drm] Driver supports precise vblank timestamp query. [ 1.683199] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.689782] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 1.692024] usb 2-2: new full-speed USB device number 2 using xhci_hcd [ 1.704421] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.706802] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 1.709050] fbcon: inteldrmfb (fb0) is primary device [ 1.709100] Console: switching to colour frame buffer device 170x48 [ 1.709121] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.816474] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 [ 1.816477] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.816868] hub 1-1:1.0: USB hub found [ 1.816949] hub 1-1:1.0: 8 ports detected [ 1.842221] usb 2-2: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00 [ 1.842224] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.842225] usb 2-2: Product: USB Receiver [ 1.842227] usb 2-2: Manufacturer: Logitech [ 1.919328] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.919764] ata1.00: ATA-11: KINGSTON SA400S37120G, SBFK10D7, max UDMA/133 [ 1.919777] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.920146] ata1.00: configured for UDMA/133 [ 1.930607] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 10D7 PQ: 0 ANSI: 5 [ 1.931019] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.931093] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.931114] sd 0:0:0:0: [sda] Write Protect is off [ 1.931117] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.931150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.933047] sda: sda1 sda2 sda3 [ 1.933477] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.968099] usb 2-8: new high-speed USB device number 3 using xhci_hcd [ 2.116400] usb 2-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.116403] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.116405] usb 2-8: Product: USB2.0-CRW [ 2.116407] usb 2-8: Manufacturer: Generic [ 2.116408] usb 2-8: SerialNumber: 20100201396000000 [ 2.121659] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C52F.0002/input/input11 [ 2.121764] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 2.122514] usbcore: registered new interface driver rtsx_usb [ 2.122979] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C52F.0003/input/input12 [ 2.180388] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 2.180447] usbcore: registered new interface driver usbhid [ 2.180449] usbhid: USB HID core driver [ 2.304101] tsc: Refined TSC clocksource calibration: 1995.380 MHz [ 2.304111] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39864456686, max_idle_ns: 881590680204 ns [ 2.304140] clocksource: Switched to clocksource tsc [ 85.888137] random: crng init done [ 85.888139] random: 7 urandom warning(s) missed due to ratelimiting [ 103.600963] NET: Registered protocol family 38 [ 103.825605] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 104.035515] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 104.052319] systemd[1]: Detected architecture x86-64. [ 104.055911] systemd[1]: Set hostname to . [ 104.056587] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 104.121037] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7 [ 104.121047] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 104.121050] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 104.191226] systemd[1]: Created slice User and Session Slice. [ 104.191629] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 104.191712] systemd[1]: Listening on udev Kernel Socket. [ 104.191796] systemd[1]: Listening on LVM2 poll daemon socket. [ 104.191904] systemd[1]: Listening on Journal Socket. [ 104.224339] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 104.277599] lp: driver loaded but no devices found [ 104.294953] ppdev: user-space parallel port driver [ 104.343379] systemd-journald[421]: Received request to flush runtime journal from PID 1 [ 104.614711] input: DELL Wireless hotkeys as /devices/virtual/input/input15 [ 104.777061] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 104.796592] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 104.823685] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 104.823687] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 104.823689] RAPL PMU: hw unit of domain package 2^-14 Joules [ 104.823690] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 104.823691] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 104.826148] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 104.832846] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 104.839438] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input16 [ 104.950793] intel_rapl: Found RAPL domain package [ 104.950795] intel_rapl: Found RAPL domain core [ 104.950797] intel_rapl: Found RAPL domain uncore [ 104.950798] intel_rapl: Found RAPL domain dram [ 104.950802] intel_rapl: RAPL package 0 domain package locked by BIOS [ 104.950810] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 104.991095] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 104.991306] ath: phy0: WB335 2-ANT card detected [ 104.991308] ath: phy0: Set BT/WLAN RX diversity capability [ 104.999850] ath: phy0: Enable LNA combining [ 105.001053] ath: phy0: ASPM enabled: 0x42 [ 105.001056] ath: EEPROM regdomain: 0x6c [ 105.001057] ath: EEPROM indicates we should expect a direct regpair map [ 105.001060] ath: Country alpha2 being used: 00 [ 105.001061] ath: Regpair used: 0x6c [ 105.020104] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 105.020658] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffa4d081480000, irq=18 [ 105.030386] input: DLLA6AE:00 06CB:75DD Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLLA6AE:00/0018:06CB:75DD.0001/input/input18 [ 105.030540] hid-multitouch 0018:06CB:75DD.0001: input,hidraw0: I2C HID v1.00 Mouse [DLLA6AE:00 06CB:75DD] on i2c-DLLA6AE:00 [ 105.054328] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 105.055741] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 105.055882] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 105.077718] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 105.077811] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 105.077906] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 105.077990] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23 [ 105.078075] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24 [ 105.120257] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 105.120261] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 105.120265] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 105.120267] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 105.120269] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 105.120272] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 105.166567] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25 [ 105.194604] Adding 999420k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS [ 105.255480] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0 [ 105.341436] leds dell::kbd_backlight: Setting an LED's brightness failed (-5) [ 105.409815] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 105.576858] audit: type=1400 audit(1540036508.667:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=723 comm="apparmor_parser" [ 105.577903] audit: type=1400 audit(1540036508.667:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=722 comm="apparmor_parser" [ 105.577907] audit: type=1400 audit(1540036508.667:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=722 comm="apparmor_parser" [ 105.577910] audit: type=1400 audit(1540036508.667:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=722 comm="apparmor_parser" [ 105.582311] audit: type=1400 audit(1540036508.671:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=720 comm="apparmor_parser" [ 105.582316] audit: type=1400 audit(1540036508.671:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser" [ 105.582319] audit: type=1400 audit(1540036508.671:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=720 comm="apparmor_parser" [ 105.582322] audit: type=1400 audit(1540036508.671:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=720 comm="apparmor_parser" [ 105.583811] audit: type=1400 audit(1540036508.671:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=719 comm="apparmor_parser" [ 105.583816] audit: type=1400 audit(1540036508.671:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=719 comm="apparmor_parser" [ 106.375850] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 106.466615] Lockdown: Xorg: ioperm is restricted; see man kernel_lockdown.7 [ 106.584128] r8169 0000:07:00.0 enp7s0: link down [ 106.584219] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 106.589459] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 106.601832] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 106.685004] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 254.088003] wlp6s0: authenticate with 90:f6:52:d8:11:1e [ 254.100004] wlp6s0: send auth to 90:f6:52:d8:11:1e (try 1/3) [ 254.102568] wlp6s0: authenticated [ 254.104132] wlp6s0: associate with 90:f6:52:d8:11:1e (try 1/3) [ 254.133285] wlp6s0: RX AssocResp from 90:f6:52:d8:11:1e (capab=0x431 status=0 aid=8) [ 254.133377] wlp6s0: associated [ 254.133481] ath: EEPROM regdomain: 0x804c [ 254.133482] ath: EEPROM indicates we should expect a country code [ 254.133483] ath: doing EEPROM country->regdmn map search [ 254.133484] ath: country maps to regdmn code: 0x3b [ 254.133485] ath: Country alpha2 being used: BR [ 254.133487] ath: Regpair used: 0x3b [ 254.133489] ath: regdomain 0x804c dynamically updated by country element [ 254.156953] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 1758.023773] wlp6s0: deauthenticating from 90:f6:52:d8:11:1e by local choice (Reason: 3=DEAUTH_LEAVING) [ 1759.166112] PM: suspend entry (deep) [ 1759.166115] PM: Syncing filesystems ... done. [ 1759.179527] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1759.181511] OOM killer disabled. [ 1759.181512] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1759.182735] Suspending console(s) (use no_console_suspend to debug) [ 1759.200388] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1759.201918] sd 0:0:0:0: [sda] Stopping disk [ 1759.297400] ACPI: EC: interrupt blocked [ 1759.337017] ACPI: Preparing to enter system sleep state S3 [ 1759.348243] ACPI: EC: event blocked [ 1759.348244] ACPI: EC: EC stopped [ 1759.348245] PM: Saving platform NVS memory [ 1759.348327] Disabling non-boot CPUs ... [ 1759.364512] IRQ 45: no longer affine to CPU1 [ 1759.365517] smpboot: CPU 1 is now offline [ 1759.388824] IRQ 43: no longer affine to CPU2 [ 1759.390591] smpboot: CPU 2 is now offline [ 1759.416701] IRQ 18: no longer affine to CPU3 [ 1759.416707] IRQ 21: no longer affine to CPU3 [ 1759.417731] smpboot: CPU 3 is now offline [ 1759.423108] ACPI: Low-level resume complete [ 1759.423164] ACPI: EC: EC started [ 1759.423165] PM: Restoring platform NVS memory [ 1759.426179] Enabling non-boot CPUs ... [ 1759.426236] x86: Booting SMP configuration: [ 1759.426237] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1759.428436] cache: parent cpu1 should not be sleeping [ 1759.428684] CPU1 is up [ 1759.428725] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1759.429316] cache: parent cpu2 should not be sleeping [ 1759.429516] CPU2 is up [ 1759.429558] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1759.430028] cache: parent cpu3 should not be sleeping [ 1759.430435] CPU3 is up [ 1759.440144] ACPI: Waking up from system sleep state S3 [ 1759.567864] ACPI: EC: interrupt unblocked [ 1759.647024] ACPI: EC: event unblocked [ 1759.647184] ath: phy0: ASPM enabled: 0x42 [ 1759.647625] sd 0:0:0:0: [sda] Starting disk [ 1759.863021] r8169 0000:07:00.0 enp7s0: link down [ 1759.894955] usb 2-2: reset full-speed USB device number 2 using xhci_hcd [ 1759.962510] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1759.963845] ata1.00: configured for UDMA/133 [ 1760.170981] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [ 1760.320831] OOM killer enabled. [ 1760.320833] Restarting tasks ... [ 1760.326219] pci_bus 0000:04: Allocating resources [ 1760.326249] pci_bus 0000:06: Allocating resources [ 1760.326276] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 1760.326288] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 1760.326303] pci_bus 0000:07: Allocating resources [ 1760.326341] pci_bus 0000:08: Allocating resources [ 1760.326360] pcieport 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 1760.326370] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 1760.326379] pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000 [ 1760.326437] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 1760.326438] done. [ 1760.326453] pcieport 0000:00:1c.4: BAR 14: assigned [mem 0xdfe00000-0xdfffffff] [ 1760.326483] pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xf0100000-0xf02fffff 64bit pref] [ 1760.326493] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff] [ 1760.326502] pcieport 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 1760.366670] pci_bus 0000:04: Allocating resources [ 1760.366683] pci_bus 0000:06: Allocating resources [ 1760.366698] pci_bus 0000:07: Allocating resources [ 1760.366717] pci_bus 0000:08: Allocating resources [ 1760.686968] pci_bus 0000:04: Allocating resources [ 1760.686983] pci_bus 0000:06: Allocating resources [ 1760.687007] pci_bus 0000:07: Allocating resources [ 1760.687033] pci_bus 0000:08: Allocating resources [ 1760.716823] PM: suspend exit [ 1760.785107] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 1760.994614] r8169 0000:07:00.0 enp7s0: link down [ 1760.994696] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 1760.997861] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1761.013921] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1761.064469] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready [ 1762.036237] wlp6s0: authenticate with 90:f6:52:d8:11:1e [ 1762.048038] wlp6s0: send auth to 90:f6:52:d8:11:1e (try 1/3) [ 1762.050394] wlp6s0: authenticated [ 1762.054597] wlp6s0: associate with 90:f6:52:d8:11:1e (try 1/3) [ 1762.065367] wlp6s0: RX AssocResp from 90:f6:52:d8:11:1e (capab=0x431 status=0 aid=8) [ 1762.065482] wlp6s0: associated [ 1762.065629] ath: EEPROM regdomain: 0x804c [ 1762.065631] ath: EEPROM indicates we should expect a country code [ 1762.065633] ath: doing EEPROM country->regdmn map search [ 1762.065635] ath: country maps to regdmn code: 0x3b [ 1762.065637] ath: Country alpha2 being used: BR [ 1762.065638] ath: Regpair used: 0x3b [ 1762.065641] ath: regdomain 0x804c dynamically updated by country element [ 1762.073798] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready