[ 0.000000] Linux version 4.18.0-7-generic (buildd@lgw01-amd64-029) (gcc version 8.2.0 (Ubuntu 8.2.0-4ubuntu1)) #8-Ubuntu SMP Tue Aug 28 18:24:42 UTC 2018 (Ubuntu 4.18.0-7.8-generic 4.18.5) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-7-generic root=/dev/mapper/s27-root ro consoleblank=0 quiet noresume [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000077174fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077175000-0x00000000771effff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000771f0000-0x00000000772f7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000772f8000-0x0000000077710fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077711000-0x0000000077a75fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000077a76000-0x0000000077c3efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077c3f000-0x0000000077fc5fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000077fc6000-0x0000000077ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./J3160DC-ITX, BIOS P1.30 03/31/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x78000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 078000000 mask FF8000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 1920M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 2 lose cover RAM: 0G [ 0.000000] found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.000000] BRK [0x4fd5a000, 0x4fd5afff] PGTABLE [ 0.000000] BRK [0x4fd5b000, 0x4fd5bfff] PGTABLE [ 0.000000] BRK [0x4fd5c000, 0x4fd5cfff] PGTABLE [ 0.000000] BRK [0x4fd5d000, 0x4fd5dfff] PGTABLE [ 0.000000] BRK [0x4fd5e000, 0x4fd5efff] PGTABLE [ 0.000000] BRK [0x4fd5f000, 0x4fd5ffff] PGTABLE [ 0.000000] BRK [0x4fd60000, 0x4fd60fff] PGTABLE [ 0.000000] BRK [0x4fd61000, 0x4fd61fff] PGTABLE [ 0.000000] BRK [0x4fd62000, 0x4fd62fff] PGTABLE [ 0.000000] BRK [0x4fd63000, 0x4fd63fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x314bb000-0x34a54fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000007767C080 000084 (v01 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x0000000077688460 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20180531/tbfadt-569) [ 0.000000] ACPI: DSDT 0x000000007767C1A0 00C2BC (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x0000000077710E80 000040 [ 0.000000] ACPI: APIC 0x0000000077688570 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000776885F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x0000000077688640 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: AAFT 0x00000000776886E0 0000E4 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000776887C8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x0000000077688808 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x0000000077688F70 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x0000000077689200 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x0000000077689380 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: LPIT 0x00000000776893C8 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 0.000000] ACPI: CSRT 0x00000000776894D0 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000077ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x77fd5000-0x77ffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000077ffffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x0000000077174fff] [ 0.000000] node 0: [mem 0x00000000771f0000-0x00000000772f7fff] [ 0.000000] node 0: [mem 0x0000000077a76000-0x0000000077c3efff] [ 0.000000] node 0: [mem 0x0000000077fc6000-0x0000000077ffffff] [ 0.000000] Reserved but unavailable: 3556 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000077ffffff] [ 0.000000] On node 0 totalpages: 487964 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7616 pages used for memmap [ 0.000000] DMA32 zone: 483968 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0x7af00000-0x7eefffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x77175000-0x771effff] [ 0.000000] PM: Registered nosave memory: [mem 0x772f8000-0x77710fff] [ 0.000000] PM: Registered nosave memory: [mem 0x77711000-0x77a75fff] [ 0.000000] PM: Registered nosave memory: [mem 0x77c3f000-0x77fc5fff] [ 0.000000] [mem 0x7ef00000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 480263 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-7-generic root=/dev/mapper/s27-root ro consoleblank=0 quiet noresume [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1837140K/1951856K available (12300K kernel code, 2627K rwdata, 4344K rodata, 2436K init, 2336K bss, 114716K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 40749 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.024000] tsc: Detected 1600.000 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024000] mce: CPU supports 6 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM1) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.024000] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.030039] TSC deadline timer enabled [ 0.030045] smpboot: CPU0: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4) [ 0.030420] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.030445] ... version: 3 [ 0.030447] ... bit width: 40 [ 0.030448] ... generic registers: 2 [ 0.030450] ... value mask: 000000ffffffffff [ 0.030452] ... max period: 0000007fffffffff [ 0.030453] ... fixed-purpose events: 3 [ 0.030454] ... event mask: 0000000700000003 [ 0.030558] Hierarchical SRCU implementation. [ 0.032000] smp: Bringing up secondary CPUs ... [ 0.032000] x86: Booting SMP configuration: [ 0.032000] .... node #0, CPUs: #1 [ 0.032244] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032588] #2 #3 [ 0.033672] smp: Brought up 1 node, 4 CPUs [ 0.033672] smpboot: Max logical packages: 1 [ 0.033672] smpboot: Total of 4 processors activated (12800.00 BogoMIPS) [ 0.036612] devtmpfs: initialized [ 0.036612] x86/mm: Memory block size: 128MB [ 0.037012] PM: Registering ACPI NVS region [mem 0x772f8000-0x77710fff] (4296704 bytes) [ 0.037012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.037012] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.037012] pinctrl core: initialized pinctrl subsystem [ 0.037012] RTC time: 20:55:37, date: 10/01/18 [ 0.037012] NET: Registered protocol family 16 [ 0.037234] audit: initializing netlink subsys (disabled) [ 0.040037] audit: type=2000 audit(1538427337.040:1): state=initialized audit_enabled=0 res=1 [ 0.040449] cpuidle: using governor ladder [ 0.040449] cpuidle: using governor menu [ 0.040449] ACPI: bus type PCI registered [ 0.040449] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.040449] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.040449] PCI: not using MMCONFIG [ 0.040451] PCI: Using configuration type 1 for base access [ 0.044977] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.044977] ACPI: Added _OSI(Module Device) [ 0.044977] ACPI: Added _OSI(Processor Device) [ 0.044977] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.044977] ACPI: Added _OSI(Processor Aggregator Device) [ 0.044977] ACPI: Added _OSI(Linux-Dell-Video) [ 0.044977] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.075649] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.087317] ACPI: Dynamic OEM Table Load: [ 0.087334] ACPI: SSDT 0xFFFFA07834330800 000655 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.089007] ACPI: Dynamic OEM Table Load: [ 0.089020] ACPI: SSDT 0xFFFFA07834395400 000357 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.090949] ACPI: Dynamic OEM Table Load: [ 0.090961] ACPI: SSDT 0xFFFFA07834393C00 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.091790] ACPI: Dynamic OEM Table Load: [ 0.091801] ACPI: SSDT 0xFFFFA078343889C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.097842] ACPI: Interpreter enabled [ 0.097903] ACPI: (supports S0 S3 S4 S5) [ 0.097907] ACPI: Using IOAPIC for interrupt routing [ 0.098159] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.104105] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.104144] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.105946] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.118424] ACPI: Power Resource [USBC] (on) [ 0.127390] (null): Device [PWM1] is in always present list [ 0.134310] ACPI: Power Resource [CLK0] (off) [ 0.135271] ACPI: Power Resource [CLK0] (off) [ 0.135415] ACPI: Power Resource [CLK1] (off) [ 0.148707] (null): Device [GPED] is in always present list [ 0.153136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.153150] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.154337] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.156117] PCI host bridge to bus 0000:00 [ 0.156123] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.156127] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.156131] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.156134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.156138] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.156142] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.156153] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.156157] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.156161] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.156177] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.156672] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.156701] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.156716] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.156727] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.157183] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.157253] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f] [ 0.157267] pci 0000:00:13.0: reg 0x24: [mem 0x91415000-0x914157ff] [ 0.157338] pci 0000:00:13.0: PME# supported from D3hot [ 0.157717] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.157753] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit] [ 0.157860] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.158298] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.158328] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff] [ 0.158342] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff] [ 0.158445] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.158821] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300 [ 0.158861] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit] [ 0.158974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.159356] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.159489] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.159876] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400 [ 0.160009] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.160396] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400 [ 0.160532] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.160923] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400 [ 0.161059] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.161462] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.161961] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.162033] pci 0000:00:1f.3: reg 0x10: [mem 0x91414000-0x9141401f] [ 0.162149] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.162816] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.162979] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.163162] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.163205] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.163244] pci 0000:03:00.0: reg 0x18: [mem 0x91304000-0x91304fff 64bit] [ 0.163270] pci 0000:03:00.0: reg 0x20: [mem 0x91300000-0x91303fff 64bit pref] [ 0.163423] pci 0000:03:00.0: supports D1 D2 [ 0.163427] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.163661] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.163667] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.163674] pci 0000:00:1c.2: bridge window [mem 0x91300000-0x913fffff] [ 0.163856] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601 [ 0.163894] pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.163911] pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.163928] pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.163944] pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.163961] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.163979] pci 0000:04:00.0: reg 0x24: [mem 0x91200000-0x912001ff] [ 0.164263] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.164270] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.164276] pci 0000:00:1c.3: bridge window [mem 0x91200000-0x912fffff] [ 0.168894] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.169190] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.169489] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.169785] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.170081] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.170375] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.170673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.170966] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.172768] SCSI subsystem initialized [ 0.172888] libata version 3.00 loaded. [ 0.172888] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.172888] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.172888] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.172888] vgaarb: loaded [ 0.172888] ACPI: bus type USB registered [ 0.172888] usbcore: registered new interface driver usbfs [ 0.172888] usbcore: registered new interface driver hub [ 0.172888] usbcore: registered new device driver usb [ 0.172888] pps_core: LinuxPPS API ver. 1 registered [ 0.172888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.172888] PTP clock support registered [ 0.172888] EDAC MC: Ver: 3.0.0 [ 0.172888] PCI: Using ACPI for IRQ routing [ 0.185130] PCI: pci_cache_line_size set to 64 bytes [ 0.185210] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.185214] e820: reserve RAM buffer [mem 0x77175000-0x77ffffff] [ 0.185216] e820: reserve RAM buffer [mem 0x772f8000-0x77ffffff] [ 0.185219] e820: reserve RAM buffer [mem 0x77c3f000-0x77ffffff] [ 0.185472] NetLabel: Initializing [ 0.185474] NetLabel: domain hash size = 128 [ 0.185476] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.185521] NetLabel: unlabeled traffic allowed by default [ 0.185573] clocksource: Switched to clocksource tsc-early [ 0.215800] VFS: Disk quotas dquot_6.6.0 [ 0.215843] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.216157] AppArmor: AppArmor Filesystem Enabled [ 0.216235] pnp: PnP ACPI init [ 0.216384] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.216847] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.216852] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.216856] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.216868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.217652] system 00:02: [io 0x0280-0x028f] has been reserved [ 0.217657] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.217661] system 00:02: [io 0x02a0-0x02af] has been reserved [ 0.217664] system 00:02: [io 0x02b0-0x02bf] has been reserved [ 0.217676] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.223333] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.223471] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.223476] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.223480] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.223484] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.223488] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.223492] system 00:04: [mem 0xfed08000-0xfed09fff] could not be reserved [ 0.223496] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.223499] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.223503] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.223515] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.224727] pnp: PnP ACPI: found 5 devices [ 0.238451] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.238483] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.238489] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.238494] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.238507] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.238518] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.238522] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.238562] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91500000-0x916fffff] [ 0.238573] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref] [ 0.238579] pci 0000:00:1c.1: BAR 14: assigned [mem 0x91900000-0x91afffff] [ 0.238589] pci 0000:00:1c.1: BAR 15: assigned [mem 0x91b00000-0x91cfffff 64bit pref] [ 0.238596] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.238601] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.238609] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.238614] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.238622] pci 0000:00:1c.0: bridge window [mem 0x91500000-0x916fffff] [ 0.238628] pci 0000:00:1c.0: bridge window [mem 0x91700000-0x918fffff 64bit pref] [ 0.238637] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.238641] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.238649] pci 0000:00:1c.1: bridge window [mem 0x91900000-0x91afffff] [ 0.238655] pci 0000:00:1c.1: bridge window [mem 0x91b00000-0x91cfffff 64bit pref] [ 0.238664] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.238669] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.238676] pci 0000:00:1c.2: bridge window [mem 0x91300000-0x913fffff] [ 0.238688] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.238693] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.238700] pci 0000:00:1c.3: bridge window [mem 0x91200000-0x912fffff] [ 0.238713] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.238716] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.238720] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.238723] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.238726] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.238730] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.238733] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.238736] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window] [ 0.238740] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.238743] pci_bus 0000:01: resource 1 [mem 0x91500000-0x916fffff] [ 0.238746] pci_bus 0000:01: resource 2 [mem 0x91700000-0x918fffff 64bit pref] [ 0.238750] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.238753] pci_bus 0000:02: resource 1 [mem 0x91900000-0x91afffff] [ 0.238756] pci_bus 0000:02: resource 2 [mem 0x91b00000-0x91cfffff 64bit pref] [ 0.238760] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.238763] pci_bus 0000:03: resource 1 [mem 0x91300000-0x913fffff] [ 0.238766] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.238769] pci_bus 0000:04: resource 1 [mem 0x91200000-0x912fffff] [ 0.239169] NET: Registered protocol family 2 [ 0.239644] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.239675] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.239762] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.239860] TCP: Hash tables configured (established 16384 bind 16384) [ 0.239956] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.239982] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.240148] NET: Registered protocol family 1 [ 0.240162] NET: Registered protocol family 44 [ 0.240189] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.240790] PCI: CLS 0 bytes, default 64 [ 0.240910] Unpacking initramfs... [ 1.981634] Freeing initrd memory: 54888K [ 1.981833] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns [ 1.981885] clocksource: Switched to clocksource tsc [ 1.982279] Scanning for low memory corruption every 60 seconds [ 1.984137] Initialise system trusted keyrings [ 1.984170] Key type blacklist registered [ 1.984404] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 1.988199] zbud: loaded [ 1.989616] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.990351] fuse init (API version 7.27) [ 1.990536] pstore: using deflate compression [ 1.997938] Key type asymmetric registered [ 1.997941] Asymmetric key parser 'x509' registered [ 1.998073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.998271] io scheduler noop registered [ 1.998279] io scheduler deadline registered [ 1.998494] io scheduler cfq registered (default) [ 2.000282] pcieport 0000:00:1c.0: Signaling PME with IRQ 115 [ 2.000335] pcieport 0000:00:1c.1: Signaling PME with IRQ 116 [ 2.000382] pcieport 0000:00:1c.2: Signaling PME with IRQ 117 [ 2.000432] pcieport 0000:00:1c.3: Signaling PME with IRQ 118 [ 2.000490] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.000567] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.000658] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.000816] efifb: probing for efifb [ 2.000837] efifb: framebuffer at 0xa0000, using 64k, total 64k [ 2.000840] efifb: mode is 640x480x1, linelength=80, pages=1 [ 2.000841] efifb: scrolling: redraw [ 2.000844] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.004449] Console: switching to colour frame buffer device 80x30 [ 2.007818] fb0: EFI VGA frame buffer device [ 2.007841] intel_idle: MWAIT substates: 0x33000020 [ 2.007844] intel_idle: v0.4.1 model 0x4C [ 2.008390] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.008641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.008679] ACPI: Power Button [PWRB] [ 2.008776] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.008799] ACPI: Sleep Button [SLPB] [ 2.008887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.008910] ACPI: Power Button [PWRF] [ 2.014642] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.023354] hpet: number irqs doesn't agree with number of timers [ 2.023503] Linux agpgart interface v0.103 [ 2.028200] loop: module loaded [ 2.028683] libphy: Fixed MDIO Bus: probed [ 2.028686] tun: Universal TUN/TAP device driver, 1.6 [ 2.028881] PPP generic driver version 2.4.2 [ 2.029039] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.029048] ehci-pci: EHCI PCI platform driver [ 2.029076] ehci-platform: EHCI generic platform driver [ 2.029096] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.029103] ohci-pci: OHCI PCI platform driver [ 2.029127] ohci-platform: OHCI generic platform driver [ 2.029147] uhci_hcd: USB Universal Host Controller Interface driver [ 2.029581] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.029596] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.030736] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810 [ 2.030749] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.031136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.031140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.031143] usb usb1: Product: xHCI Host Controller [ 2.031146] usb usb1: Manufacturer: Linux 4.18.0-7-generic xhci-hcd [ 2.031149] usb usb1: SerialNumber: 0000:00:14.0 [ 2.031500] hub 1-0:1.0: USB hub found [ 2.031529] hub 1-0:1.0: 7 ports detected [ 2.033231] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.033240] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.033248] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.033355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 2.033359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.033362] usb usb2: Product: xHCI Host Controller [ 2.033365] usb usb2: Manufacturer: Linux 4.18.0-7-generic xhci-hcd [ 2.033368] usb usb2: SerialNumber: 0000:00:14.0 [ 2.033680] hub 2-0:1.0: USB hub found [ 2.033712] hub 2-0:1.0: 6 ports detected [ 2.035220] i8042: PNP: No PS/2 controller found. [ 2.035475] mousedev: PS/2 mouse device common for all mice [ 2.035935] rtc_cmos 00:00: RTC can wake from S4 [ 2.036303] rtc_cmos 00:00: registered as rtc0 [ 2.036352] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram [ 2.036369] i2c /dev entries driver [ 2.036510] device-mapper: uevent: version 1.0.3 [ 2.036740] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.036751] intel_pstate: Intel P-state driver initializing [ 2.037773] ledtrig-cpu: registered to indicate activity on CPUs [ 2.038919] NET: Registered protocol family 10 [ 2.054833] Segment Routing with IPv6 [ 2.054890] NET: Registered protocol family 17 [ 2.055252] Key type dns_resolver registered [ 2.056043] RAS: Correctable Errors collector initialized. [ 2.056108] microcode: sig=0x406c4, pf=0x1, revision=0x408 [ 2.056496] microcode: Microcode Update Driver: v2.2. [ 2.056516] sched_clock: Marking stable (2056485050, 0)->(2038117925, 18367125) [ 2.057667] registered taskstats version 1 [ 2.057686] Loading compiled-in X.509 certificates [ 2.065154] Loaded X.509 cert 'Build time autogenerated kernel key: 91a464c12196d78ca164d3471ae371598cb6b20a' [ 2.065214] zswap: loaded using pool lzo/zbud [ 2.078313] Key type big_key registered [ 2.078321] Key type trusted registered [ 2.085146] Key type encrypted registered [ 2.085154] AppArmor: AppArmor sha1 policy hashing enabled [ 2.085169] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.085186] ima: Allocated hash algorithm: sha1 [ 2.085218] evm: Initialising EVM extended attributes: [ 2.085219] evm: security.selinux [ 2.085220] evm: security.SMACK64 [ 2.085221] evm: security.SMACK64EXEC [ 2.085222] evm: security.SMACK64TRANSMUTE [ 2.085223] evm: security.SMACK64MMAP [ 2.085224] evm: security.apparmor [ 2.085225] evm: security.ima [ 2.085226] evm: security.capability [ 2.085227] evm: HMAC attrs: 0x1 [ 2.086077] Magic number: 6:113:952 [ 2.086151] tty tty9: hash matches [ 2.086229] memory memory5: hash matches [ 2.086544] rtc_cmos 00:00: setting system clock to 2018-10-01 20:55:39 UTC (1538427339) [ 2.115525] Freeing unused kernel image memory: 2436K [ 2.132657] Write protecting the kernel read-only data: 20480k [ 2.135208] Freeing unused kernel image memory: 2008K [ 2.136492] Freeing unused kernel image memory: 1800K [ 2.162056] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.162057] x86/mm: Checking user space page tables [ 2.186481] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.368050] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.386948] hidraw: raw HID events driver (C) Jiri Kosina [ 2.432739] ahci 0000:00:13.0: version 3.0 [ 2.433138] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.433143] ahci 0000:00:13.0: flags: 64bit ncq ilck led clo only pio slum part deso sadm sds apst [ 2.436727] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.437414] scsi host0: ahci [ 2.437788] scsi host1: ahci [ 2.437880] ata1: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415100 irq 120 [ 2.437884] ata2: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415180 irq 120 [ 2.438228] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled [ 2.438274] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.438278] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc [ 2.438877] scsi host2: ahci [ 2.442765] scsi host3: ahci [ 2.442875] ata3: SATA max UDMA/133 abar m512@0x91200000 port 0x91200100 irq 121 [ 2.442879] ata4: SATA max UDMA/133 abar m512@0x91200000 port 0x91200180 irq 121 [ 2.449133] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 70:85:c2:07:46:4c, XID 4c000800, IRQ 122 [ 2.449137] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.522157] usb 1-1: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.01 [ 2.522162] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 2.522165] usb 1-1: Product: AS2107 [ 2.522168] usb 1-1: Manufacturer: ASMedia [ 2.525076] hub 1-1:1.0: USB hub found [ 2.525562] hub 1-1:1.0: 4 ports detected [ 2.644825] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.668063] usb 2-1: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.01 [ 2.668068] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 2.668071] usb 2-1: Product: AS2107 [ 2.668074] usb 2-1: Manufacturer: ASMedia [ 2.670753] hub 2-1:1.0: USB hub found [ 2.671296] hub 2-1:1.0: 4 ports detected [ 2.751288] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.751403] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.752941] ata2.00: ATA-10: HGST HTS541010B7E610, 01.01A01, max UDMA/133 [ 2.752946] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.754807] ata2.00: configured for UDMA/133 [ 2.755039] ata1.00: ATA-8: WDC WD5000BEVT-00A0RT0, 01.01A01, max UDMA/133 [ 2.755044] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.759439] ata1.00: configured for UDMA/133 [ 2.760443] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-0 1A01 PQ: 0 ANSI: 5 [ 2.761181] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.761253] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.761287] sd 0:0:0:0: [sda] Write Protect is off [ 2.761291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.761346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.761614] scsi 1:0:0:0: Direct-Access ATA HGST HTS541010B7 1A01 PQ: 0 ANSI: 5 [ 2.761982] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.762258] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.762261] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.762377] sd 1:0:0:0: [sdb] Write Protect is off [ 2.762380] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.762619] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.792303] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 2.801825] sda: sda1 sda2 < sda5 > [ 2.804427] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.884900] sdb: sdb1 [ 2.885695] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.920462] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.928829] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 2.928835] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.937652] ata3.00: configured for UDMA/133 [ 2.938585] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5 [ 2.939461] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.939467] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 2.939495] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.939500] sd 2:0:0:0: [sdc] Write Protect is off [ 2.939505] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.939560] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.943506] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.31 [ 2.943520] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.943524] usb 1-5: Product: USB2.0 Hub [ 2.946300] hub 1-5:1.0: USB hub found [ 2.946883] hub 1-5:1.0: 4 ports detected [ 2.966592] sdc: sdc1 [ 2.967490] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.036339] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 3.432484] usb 1-5.1: new high-speed USB device number 5 using xhci_hcd [ 3.534460] usb 1-5.1: New USB device found, idVendor=2040, idProduct=0265, bcdDevice= 1.00 [ 3.534466] usb 1-5.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.534469] usb 1-5.1: Product: dualHD [ 3.534472] usb 1-5.1: Manufacturer: HCW [ 3.534475] usb 1-5.1: SerialNumber: 0014012645 [ 3.652326] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.654544] ata4.00: ATA-5: ULTIMATE CF CARD, Ver7.04, max UDMA7 [ 3.654549] ata4.00: 62455680 sectors, multi 1: LBA [ 3.656664] ata4.00: configured for UDMA/133 [ 3.657145] scsi 3:0:0:0: Direct-Access ATA ULTIMATE CF CARD .04 PQ: 0 ANSI: 5 [ 3.658144] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.658230] sd 3:0:0:0: [sdd] 62455680 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 3.658264] sd 3:0:0:0: [sdd] Write Protect is off [ 3.658269] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.658324] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.662016] sdd: sdd1 [ 3.662895] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.771703] random: fast init done [ 3.790830] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.795562] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.795620] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 5.010558] usb 1-1.4: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 1.00 [ 5.010563] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 5.010567] usb 1-1.4: Product: Eaton 3S [ 5.010570] usb 1-1.4: Manufacturer: EATON [ 5.010572] usb 1-1.4: SerialNumber: 000000000 [ 8.359325] usbcore: registered new interface driver usbhid [ 8.359327] usbhid: USB HID core driver [ 8.365413] hid-generic 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v10.10 Device [EATON Eaton 3S] on usb-0000:00:14.0-1.4/input0 [ 10.259128] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 10.543393] random: crng init done [ 10.543398] random: 7 urandom warning(s) missed due to ratelimiting [ 13.467666] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 13.488986] systemd[1]: Detected architecture x86-64. [ 13.515838] systemd[1]: Set hostname to . [ 19.967864] systemd[1]: Reached target User and Group Name Lookups. [ 19.975281] systemd[1]: Created slice system-openvpn.slice. [ 19.975709] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 19.975765] systemd[1]: Reached target Remote File Systems. [ 19.976145] systemd[1]: Listening on Journal Socket. [ 19.978080] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 19.980480] systemd[1]: Mounting Kernel Debug File System... [ 19.983190] systemd[1]: Mounting Huge Pages File System... [ 19.983559] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 19.985794] systemd[1]: Starting Availability of block devices... [ 20.272229] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 21.059499] lp: driver loaded but no devices found [ 21.314185] ppdev: user-space parallel port driver [ 25.433924] Bluetooth: Core ver 2.22 [ 25.433963] NET: Registered protocol family 31 [ 25.433965] Bluetooth: HCI device and connection manager initialized [ 25.433972] Bluetooth: HCI socket layer initialized [ 25.433975] Bluetooth: L2CAP socket layer initialized [ 25.433987] Bluetooth: SCO socket layer initialized [ 26.110161] Bluetooth: HCI UART driver ver 2.3 [ 26.110165] Bluetooth: HCI UART protocol H4 registered [ 26.110166] Bluetooth: HCI UART protocol BCSP registered [ 26.110201] Bluetooth: HCI UART protocol LL registered [ 26.110203] Bluetooth: HCI UART protocol ATH3K registered [ 26.110204] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 26.110247] Bluetooth: HCI UART protocol Intel registered [ 26.110292] Bluetooth: HCI UART protocol Broadcom registered [ 26.110311] Bluetooth: HCI UART protocol QCA registered [ 26.110313] Bluetooth: HCI UART protocol AG6XX registered [ 26.110314] Bluetooth: HCI UART protocol Marvell registered [ 26.478400] media: Linux media interface: v0.10 [ 26.555576] cryptd: max_cpu_qlen set to 1000 [ 26.579604] videodev: Linux video capture interface: v2.00 [ 26.730993] SSE version of gcm_enc/dec engaged. [ 26.735056] em28xx 1-5.1:1.0: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0) [ 26.735061] em28xx 1-5.1:1.0: DVB interface 0 found: isoc [ 26.796184] em28xx 1-5.1:1.0: chip ID is em28174 [ 28.014482] em28xx 1-5.1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x58e1cec8 [ 28.014486] em28xx 1-5.1:1.0: EEPROM info: [ 28.014489] em28xx 1-5.1:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 28.022124] em28xx 1-5.1:1.0: AC97 audio (5 sample rates) [ 28.022128] em28xx 1-5.1:1.0: 500mA max power [ 28.022132] em28xx 1-5.1:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e [ 28.080039] em28xx 1-5.1:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99) [ 28.083924] tveeprom: Hauppauge model 204109, rev B3I6, serial# 14012645 [ 28.083936] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 28.083939] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 28.083940] tveeprom: audio processor is None (idx 0) [ 28.083942] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 28.083949] em28xx 1-5.1:1.0: dvb set to isoc mode. [ 28.144274] em28xx 1-5.1:1.0: chip ID is em28174 [ 28.529264] F2FS-fs (sdd1): mounting with "discard" option, but the device does not support discard [ 28.640248] F2FS-fs (sdd1): Mounted with checkpoint version = 782fb [ 29.359102] em28xx 1-5.1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x58e1cec8 [ 29.359106] em28xx 1-5.1:1.0: EEPROM info: [ 29.359108] em28xx 1-5.1:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 29.365810] em28xx 1-5.1:1.0: AC97 audio (5 sample rates) [ 29.365812] em28xx 1-5.1:1.0: 500mA max power [ 29.365816] em28xx 1-5.1:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e [ 29.428027] em28xx 1-5.1:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99) [ 29.431248] tveeprom: Hauppauge model 204109, rev B3I6, serial# 14012645 [ 29.431250] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 29.431252] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 29.431253] tveeprom: audio processor is None (idx 0) [ 29.431255] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 29.431258] em28xx 1-5.1:1.0: dvb ts2 set to isoc mode. [ 29.444135] intel_rapl: Found RAPL domain package [ 29.444139] intel_rapl: Found RAPL domain core [ 29.509939] i915: unknown parameter 'drm' ignored [ 29.511263] checking generic (a0000 10000) vs hw (80000000 10000000) [ 29.511267] fb: switching to inteldrmfb from EFI VGA [ 29.511335] Console: switching to colour dummy device 80x25 [ 29.511527] [drm] Replacing VGA console driver [ 29.512431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 29.512433] [drm] Driver supports precise vblank timestamp query. [ 29.518265] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 29.621550] systemd-journald[321]: Received request to flush runtime journal from PID 1 [ 29.630302] usbcore: registered new interface driver em28xx [ 29.633974] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 29.637015] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 29.637742] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 29.638074] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 29.739942] fbcon: inteldrmfb (fb0) is primary device [ 29.762624] Console: switching to colour frame buffer device 160x64 [ 29.782968] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 29.849674] em28xx 1-5.1:1.0: Binding DVB extension [ 30.042973] i2c i2c-1: Added multiplexed i2c bus 13 [ 30.042978] si2168 1-0064: Silicon Labs Si2168-B40 successfully identified [ 30.042981] si2168 1-0064: firmware version: B 4.0.2 [ 30.104393] si2157 13-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 30.104436] dvbdev: DVB: registering new adapter (1-5.1:1.0) [ 30.104442] em28xx 1-5.1:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 30.105605] em28xx 1-5.1:1.0: DVB extension successfully initialized [ 30.105611] em28xx 1-5.1:1.0: Binding DVB extension [ 30.115897] i2c i2c-3: Added multiplexed i2c bus 14 [ 30.115903] si2168 3-0067: Silicon Labs Si2168-B40 successfully identified [ 30.115905] si2168 3-0067: firmware version: B 4.0.2 [ 30.119661] si2157 14-0063: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 30.119697] dvbdev: DVB: registering new adapter (1-5.1:1.0) [ 30.119703] em28xx 1-5.1:1.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 30.123208] em28xx 1-5.1:1.0: DVB extension successfully initialized [ 30.123214] em28xx: Registered (Em28xx dvb Extension) extension [ 30.211915] em28xx 1-5.1:1.0: Registering input extension [ 30.229045] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 30.252027] Registered IR keymap rc-hauppauge [ 30.252282] rc rc0: 1-5.1:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/rc/rc0 [ 30.252356] input: 1-5.1:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/rc/rc0/input4 [ 30.255209] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter [ 30.255213] em28xx 1-5.1:1.0: Input extension successfully initialized [ 30.255216] em28xx 1-5.1:1.0: Remote control support is not available for this card. [ 30.255218] em28xx: Registered (Em28xx Input Extension) extension [ 30.274929] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 30.274935] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 30.274937] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 30.274939] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 30.274942] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 30.274943] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 30.274947] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 30.274949] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 30.274951] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 30.405768] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 30.405887] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 30.406016] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 30.406128] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 30.406236] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 30.406349] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 30.406469] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 30.406579] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 30.406688] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 30.406798] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 30.406922] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 31.690490] Adding 5636092k swap on /dev/mapper/s27-swap_1. Priority:-2 extents:1 across:5636092k FS [ 34.735953] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 34.780632] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 104.061629] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 107.077742] audit: type=1400 audit(1538427444.488:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=934 comm="apparmor_parser" [ 107.134093] audit: type=1400 audit(1538427444.544:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=933 comm="apparmor_parser" [ 107.140875] audit: type=1400 audit(1538427444.552:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=932 comm="apparmor_parser" [ 107.140887] audit: type=1400 audit(1538427444.552:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=932 comm="apparmor_parser" [ 107.140893] audit: type=1400 audit(1538427444.552:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=932 comm="apparmor_parser" [ 107.637091] audit: type=1400 audit(1538427445.048:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=931 comm="apparmor_parser" [ 107.637106] audit: type=1400 audit(1538427445.048:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=931 comm="apparmor_parser" [ 107.637115] audit: type=1400 audit(1538427445.048:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=931 comm="apparmor_parser" [ 107.637122] audit: type=1400 audit(1538427445.048:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=931 comm="apparmor_parser" [ 107.896264] audit: type=1400 audit(1538427445.304:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=953 comm="apparmor_parser" [ 110.689511] Process accounting resumed [ 114.702461] r8169 0000:03:00.0 eth0: link down [ 114.702527] r8169 0000:03:00.0 eth0: link down [ 114.702650] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 117.517135] r8169 0000:03:00.0 eth0: link up [ 117.517174] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 118.803061] r8169 0000:03:00.0 eth0: link down [ 121.473215] r8169 0000:03:00.0 eth0: link up [ 129.525253] u32 classifier [ 129.525261] Actions configured [ 131.027252] input: lircd-uinput as /devices/virtual/input/input16 [ 136.540862] bpfilter: Loaded bpfilter_umh pid 2568 [ 163.481133] si2168 3-0067: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2 [ 163.562490] si2168 3-0067: please install firmware file 'dvb-demod-si2168-b40-01.fw' [ 163.562495] si2168 3-0067: downloading firmware from file 'dvb-demod-si2168-02.fw' [ 163.765383] si2168 3-0067: firmware version: B 4.0.4 [ 163.770113] si2157 14-0063: found a 'Silicon Labs Si2157-A30' [ 163.819055] si2157 14-0063: firmware version: 3.0.5 [ 163.819100] em28xx 1-5.1:1.0: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000) [ 163.986085] si2168 1-0064: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2 [ 163.986168] si2168 1-0064: please install firmware file 'dvb-demod-si2168-b40-01.fw' [ 163.986171] si2168 1-0064: downloading firmware from file 'dvb-demod-si2168-02.fw' [ 164.195396] si2168 1-0064: firmware version: B 4.0.4 [ 164.201127] si2157 13-0060: found a 'Silicon Labs Si2157-A30' [ 164.250576] si2157 13-0060: firmware version: 3.0.5 [ 164.250719] em28xx 1-5.1:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000) [ 615.249665] usb 1-5.1: USB disconnect, device number 5 [ 615.249780] em28xx 1-5.1:1.0: Disconnecting em28xx #1 [ 615.249784] em28xx 1-5.1:1.0: Disconnecting em28xx [ 615.249787] em28xx 1-5.1:1.0: Closing DVB extension [ 615.253102] em28xx 1-5.1:1.0: Closing DVB extension [ 615.254502] em28xx 1-5.1:1.0: Closing input extension [ 615.254508] em28xx 1-5.1:1.0: Closing input extension [ 615.332888] em28xx 1-5.1:1.0: Freeing device [ 615.332903] em28xx 1-5.1:1.0: Freeing device [ 615.332938] ------------[ cut here ]------------ [ 615.332946] kernel BUG at mm/slub.c:296! [ 615.333181] invalid opcode: 0000 [#1] SMP PTI [ 615.333381] CPU: 0 PID: 39 Comm: kworker/0:2 Not tainted 4.18.0-7-generic #8-Ubuntu [ 615.333702] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3160DC-ITX, BIOS P1.30 03/31/2016 [ 615.334119] Workqueue: usb_hub_wq hub_event [ 615.334321] RIP: 0010:__slab_free+0x18c/0x340 [ 615.334511] Code: fa 66 0f 1f 44 00 00 f0 49 0f ba 2c 24 00 0f 82 90 00 00 00 4d 3b 6c 24 20 74 11 49 0f ba 34 24 00 57 9d 0f 1f 44 00 00 eb 9b <0f> 0b 49 3b 54 24 28 75 e8 49 89 5c 24 20 49 89 4c 24 28 49 0f ba [ 615.335494] RSP: 0000:ffffb62f00487a80 EFLAGS: 00010246 [ 615.335719] RAX: ffffa077f44b64f0 RBX: ffffa077f44b64f0 RCX: ffffa077f44b64f0 [ 615.336013] RDX: 00000000820001fc RSI: ffffef2040d12d80 RDI: ffffa07836803c80 [ 615.336306] RBP: ffffb62f00487b20 R08: 0000000000000001 R09: ffffffffc0540d79 [ 615.336600] R10: ffffa077f44b64f0 R11: 0000000000000001 R12: ffffef2040d12d80 [ 615.336894] R13: ffffa077f44b64f0 R14: ffffa07836803c80 R15: ffffa077f3da90a0 [ 615.337190] FS: 0000000000000000(0000) GS:ffffa07836e00000(0000) knlGS:0000000000000000 [ 615.337529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 615.337779] CR2: 0000560522b99960 CR3: 000000006ca42000 CR4: 00000000001006f0 [ 615.338071] Call Trace: [ 615.338207] ? __dev_printk+0x44/0x70 [ 615.338375] ? _dev_info+0x6c/0x90 [ 615.338547] ? em28xx_free_device+0x39/0x50 [em28xx] [ 615.338766] kfree+0x15b/0x180 [ 615.338922] em28xx_free_device+0x39/0x50 [em28xx] [ 615.339143] em28xx_usb_disconnect+0xfc/0x100 [em28xx] [ 615.339369] usb_unbind_interface+0x7a/0x280 [ 615.339566] device_release_driver_internal+0x18c/0x250 [ 615.339796] device_release_driver+0x12/0x20 [ 615.339986] bus_remove_device+0xec/0x160 [ 615.340166] device_del+0x13b/0x350 [ 615.340328] ? usb_remove_ep_devs+0x1f/0x30 [ 615.340518] usb_disable_device+0x9f/0x270 [ 615.340703] usb_disconnect+0xc6/0x270 [ 615.340877] hub_port_connect+0x85/0xa60 [ 615.341056] port_event+0x45b/0x6d0 [ 615.341219] hub_event+0x14f/0x3b0 [ 615.341383] process_one_work+0x20f/0x3c0 [ 615.341566] worker_thread+0x34/0x400 [ 615.341736] kthread+0x120/0x140 [ 615.341887] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 615.342100] ? kthread_bind+0x40/0x40 [ 615.342271] ret_from_fork+0x35/0x40 [ 615.342433] Modules linked in: xt_tcpudp iptable_filter bpfilter cls_u32 sch_cbq snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic rc_hauppauge em28xx_rc rc_core si2157 si2168 i2c_mux em28xx_dvb dvb_core i915 intel_rapl intel_powerclamp coretemp drm_kms_helper kvm_intel drm kvm f2fs i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt irqbypass snd_hda_intel punit_atom_debug snd_hda_codec crct10dif_pclmul crc32_pclmul snd_hda_core ghash_clmulni_intel snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq snd_seq_device snd_timer em28xx aesni_intel tveeprom aes_x86_64 v4l2_common crypto_simd videodev cryptd glue_helper media intel_cstate hci_uart mei_txe snd intel_xhci_usb_role_switch roles soundcore btqca btbcm btintel bluetooth rfkill_gpio ecdh_generic mei [ 615.345450] pwm_lpss_platform pwm_lpss mac_hid intel_int0002_vgpio sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid r8169 lpc_ich ahci mii libahci video i2c_hid hid [ 615.346435] ---[ end trace ee18337061f9b20c ]--- [ 615.346514] RIP: 0010:__slab_free+0x18c/0x340 [ 615.346556] Code: fa 66 0f 1f 44 00 00 f0 49 0f ba 2c 24 00 0f 82 90 00 00 00 4d 3b 6c 24 20 74 11 49 0f ba 34 24 00 57 9d 0f 1f 44 00 00 eb 9b <0f> 0b 49 3b 54 24 28 75 e8 49 89 5c 24 20 49 89 4c 24 28 49 0f ba [ 615.346776] RSP: 0000:ffffb62f00487a80 EFLAGS: 00010246 [ 615.346826] RAX: ffffa077f44b64f0 RBX: ffffa077f44b64f0 RCX: ffffa077f44b64f0 [ 615.346892] RDX: 00000000820001fc RSI: ffffef2040d12d80 RDI: ffffa07836803c80 [ 615.346958] RBP: ffffb62f00487b20 R08: 0000000000000001 R09: ffffffffc0540d79 [ 615.347023] R10: ffffa077f44b64f0 R11: 0000000000000001 R12: ffffef2040d12d80 [ 615.347089] R13: ffffa077f44b64f0 R14: ffffa07836803c80 R15: ffffa077f3da90a0 [ 615.347155] FS: 0000000000000000(0000) GS:ffffa07836e00000(0000) knlGS:0000000000000000 [ 615.347230] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 615.350526] CR2: 0000560522b99960 CR3: 000000004f60a000 CR4: 00000000001006f0