How can it see the 2.4GHz if it's a 5GHz adapter?
Is there some way I can get it to connect to 2.4GHz signals as well? 😊

On Wed, Jan 2, 2019, 7:30 PM Robert weaver <<email address hidden> wrote:

> I can confirm that after upgrading to Kernel 4.18.0-13 , and moving up to
> ubuntu 18.10
> BCM4360 802.11ac Wireless Network Adaptor (rev 03)
> Still not able to view 5Ghz networks .
> Wifi Radar only see's G Networks.
>
> iwlist freq shows available frequencies
> wlp2s0    32 channels in total; available frequencies :
>           Channel 01 : 2.412 GHz
>           Channel 02 : 2.417 GHz
>           Channel 03 : 2.422 GHz
>           Channel 04 : 2.427 GHz
>           Channel 05 : 2.432 GHz
>           Channel 06 : 2.437 GHz
>           Channel 07 : 2.442 GHz
>           Channel 08 : 2.447 GHz
>           Channel 09 : 2.452 GHz
>           Channel 10 : 2.457 GHz
>           Channel 11 : 2.462 GHz
>           Channel 12 : 2.467 GHz
>           Channel 13 : 2.472 GHz
>           Channel 36 : 5.18 GHz
>           Channel 38 : 5.19 GHz
>           Channel 40 : 5.2 GHz
>           Channel 42 : 5.21 GHz
>           Channel 44 : 5.22 GHz
>           Channel 46 : 5.23 GHz
>           Channel 48 : 5.24 GHz
>           Channel 52 : 5.26 GHz
>           Channel 54 : 5.27 GHz
>           Channel 56 : 5.28 GHz
>           Channel 58 : 5.29 GHz
>           Channel 60 : 5.3 GHz
>           Channel 62 : 5.31 GHz
>           Channel 64 : 5.32 GHz
>           Channel 100 : 5.5 GHz
>           Channel 102 : 5.51 GHz
>           Channel 104 : 5.52 GHz
>           Channel 106 : 5.53 GHz
>           Channel 108 : 5.54 GHz
>           Current Frequency:2.462 GHz (Channel 11)
>
> I can confirm that when I run iwlist scan i can see skqbox on 5GHz
> 8166-          Cell 05 - Address: 0C:F9:C0:24:19:3B
> 8213-                    Channel:36
> 8244:                    Frequency:5.18 GHz (Channel 36)
> 8296-                    Quality=28/70  Signal level=-82 dBm
> 8354-                    Encryption key:on
> 8392-                    ESSID:"SKY2D188"
>
> So Changing my wifi AP , to use 5Ghz on Channel 36 , im now able to see
> the AP
>
> 10209-          Cell 06 - Address: 7C:FF:4D:EE:D3:A8
> 10256-                    Channel:36
> 10287:                    Frequency:5.18 GHz (Channel 36)
> 10339-                    Quality=34/70  Signal level=-76 dBm
> 10397-                    Encryption key:on
> 10435-                    ESSID:"FRITZ!Box 3490"
> 10478-                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24
> Mb/s
> 10550-                              36 Mb/s; 48 Mb/s; 54 Mb/s
> 10606-                    Mode:Master
> 10638-                    Extra:tsf=0000000000000000
> 10685-                    Extra: Last beacon: 80ms ago
> 10734-                    IE: Unknown: 000E465249545A21426F782033343930
>
> But connection Manager still wont use the the above network
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1787742
>
> Title:
>   TP-Link Archer T1U 5GHz WiFi adapter not compatible
>
> Status in linux package in Ubuntu:
>   Confirmed
>
> Bug description:
>   My TP-Link Archer T1U 5GHz USB WiFi adapter/dongle is not being
> recognized by the system settings and WiFi setup wizards, likely due to a
> compatibility issue with the Linux kernel.
>   The device is functional in Windows and recognized by my motherboard,
> but unfortunately it is a mere waste of a USB port with Ubuntu and other
> Linux distributions.
>
>   -----
>   Terminal output when running 'lsusb' cmd:
>   jeb@A880G:~$ lsusb
>   Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>   Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>   Bus 006 Device 002: ID 03f0:d407 Hewlett-Packard
>   Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>   Bus 005 Device 002: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser
> Mouse]
>   Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>   Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
>   Bus 001 Device 008: ID 0461:4d75 Primax Electronics, Ltd Rocketfish
> RF-FLBTAD Bluetooth Adapter
>   Bus 001 Device 007: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface
> Subclass)
>   Bus 001 Device 006: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface
> Subclass)
>   Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub
> (part of BCM2046 Bluetooth)
>   Bus 001 Device 009: ID 2357:0105
>   Bus 001 Device 003: ID 148f:5370 Ralink Technology, Corp. RT5370
> Wireless Adapter
>   Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
>   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>   -----
>
>   ProblemType: Bug
>   DistroRelease: Ubuntu 18.04
>   Package: linux-image-4.15.0-32-generic 4.15.0-32.35
>   ProcVersionSignature: Ubuntu 4.15.0-32.35-generic 4.15.18
>   Uname: Linux 4.15.0-32-generic x86_64
>   ApportVersion: 2.20.9-0ubuntu7.2
>   Architecture: amd64
>   AudioDevicesInUse:
>    USER        PID ACCESS COMMAND
>    /dev/snd/controlC2:  jeb        1608 F.... pulseaudio
>    /dev/snd/controlC1:  jeb        1608 F.... pulseaudio
>    /dev/snd/controlC0:  jeb        1608 F.... pulseaudio
>   CurrentDesktop: ubuntu:GNOME
>   Date: Sat Aug 18 12:20:18 2018
>   InstallationDate: Installed on 2018-08-17 (1 days ago)
>   InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64
> (20180426)
>   MachineType: BIOSTAR Group A880G+
>   ProcEnviron:
>    PATH=(custom, no user)
>    XDG_RUNTIME_DIR=<set>
>    LANG=en_US.UTF-8
>    SHELL=/bin/bash
>   ProcFB: 0 nouveaufb
>   ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-32-generic
> root=UUID=a967adb1-1600-455b-8704-e2bf5de5081d ro quiet splash vt.handoff=1
>   RelatedPackageVersions:
>    linux-restricted-modules-4.15.0-32-generic N/A
>    linux-backports-modules-4.15.0-32-generic  N/A
>    linux-firmware                             1.173.1
>   SourcePackage: linux
>   UpgradeStatus: No upgrade log present (probably fresh install)
>   dmi.bios.date: 09/21/2011
>   dmi.bios.vendor: American Megatrends Inc.
>   dmi.bios.version: 080016
>   dmi.board.asset.tag: To Be Filled By O.E.M.
>   dmi.board.name: A880G+
>   dmi.board.vendor: BIOSTAR Group
>   dmi.chassis.asset.tag: None
>   dmi.chassis.type: 3
>   dmi.chassis.vendor: BIOSTAR Group
>   dmi.modalias:
> dmi:bvnAmericanMegatrendsInc.:bvr080016:bd09/21/2011:svnBIOSTARGroup:pnA880G+:pvr:rvnBIOSTARGroup:rnA880G+:rvr:cvnBIOSTARGroup:ct3:cvr:
>   dmi.product.family: To Be Filled By O.E.M.
>   dmi.product.name: A880G+
>   dmi.sys.vendor: BIOSTAR Group
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1787742/+subscriptions
>