_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 27.197563] usb usb6: configuration #1 chosen from 1 choice [ 27.197578] hub 6-0:1.0: USB hub found [ 27.197581] hub 6-0:1.0: 2 ports detected [ 27.301327] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 27.351107] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ff6ff800-ff6fffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 27.351273] ata_piix 0000:00:1f.2: version 2.12 [ 27.351281] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 27.351316] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21 [ 27.351349] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 27.351401] scsi0 : ata_piix [ 27.351434] scsi1 : ata_piix [ 27.351507] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 [ 27.351509] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 [ 27.440948] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 27.529315] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133 [ 27.529317] ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 27.545290] ata1.00: configured for UDMA/133 [ 27.589909] usb 5-1: configuration #1 chosen from 1 choice [ 27.592864] hub 5-1:1.0: USB hub found [ 27.594838] hub 5-1:1.0: 4 ports detected [ 27.896460] ata2.01: ATAPI: PLEXTOR DVDR PX-755A, 1.04, max UDMA/66 [ 27.927269] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 28.068178] ata2.01: configured for UDMA/66 [ 28.068276] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 28.069037] scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-755A 1.04 PQ: 0 ANSI: 5 [ 28.069081] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 28.069113] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 21 [ 28.069139] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 28.069167] scsi2 : ata_piix [ 28.069194] scsi3 : ata_piix [ 28.069246] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21 [ 28.069248] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21 [ 28.111011] usb 5-1.1: configuration #1 chosen from 1 choice [ 28.124940] usbcore: registered new interface driver hiddev [ 28.158051] input: ATEN CS-1734A V3.4.331 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1.1/5-1.1:1.0/input/input1 [ 28.183658] input,hidraw0: USB HID v1.00 Keyboard [ATEN CS-1734A V3.4.331] on usb-0000:00:1d.1-1.1 [ 28.211904] input: ATEN CS-1734A V3.4.331 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1.1/5-1.1:1.1/input/input2 [ 28.248536] input,hidraw1: USB HID v1.00 Mouse [ATEN CS-1734A V3.4.331] on usb-0000:00:1d.1-1.1 [ 28.248544] usbcore: registered new interface driver usbhid [ 28.248546] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 28.408463] ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 21 [ 28.408475] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 28.408480] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 28.408498] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 28.412409] ehci_hcd 0000:00:1a.7: debug port 1 [ 28.412416] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 28.412420] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xffa7b400 [ 28.416364] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 28.416373] sd 0:0:0:0: [sda] Write Protect is off [ 28.416375] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.416387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.416420] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) [ 28.416427] sd 0:0:0:0: [sda] Write Protect is off [ 28.416429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.416440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.416443] sda:<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.428274] usb usb7: configuration #1 chosen from 1 choice [ 28.428291] hub 7-0:1.0: USB hub found [ 28.428294] hub 7-0:1.0: 6 ports detected [ 28.436974] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 28.526536] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.528264] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 28.528267] Uniform CD-ROM driver Revision: 3.20 [ 28.528295] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 28.528588] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.528601] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 28.532058] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 28.532067] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 28.532073] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 28.532087] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 28.536007] ehci_hcd 0000:00:1d.7: debug port 1 [ 28.536015] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 28.536019] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa7b000 [ 28.544004] usb 5-1: USB disconnect, address 2 [ 28.544006] usb 5-1.1: USB disconnect, address 3 [ 28.551982] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.552071] usb usb8: configuration #1 chosen from 1 choice [ 28.552090] hub 8-0:1.0: USB hub found [ 28.552094] hub 8-0:1.0: 6 ports detected [ 28.619056] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000000000000000] [ 29.277698] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 29.426755] usb 5-1: configuration #1 chosen from 1 choice [ 29.429701] hub 5-1:1.0: USB hub found [ 29.431674] hub 5-1:1.0: 4 ports detected [ 29.742142] usb 5-1.1: new low speed USB device using uhci_hcd and address 5 [ 29.927878] usb 5-1.1: configuration #1 chosen from 1 choice [ 29.964938] input: ATEN CS-1734A V3.4.331 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 30.008436] input,hidraw0: USB HID v1.00 Keyboard [ATEN CS-1734A V3.4.331] on usb-0000:00:1d.1-1.1 [ 30.040758] input: ATEN CS-1734A V3.4.331 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 30.088286] input,hidraw1: USB HID v1.00 Mouse [ATEN CS-1734A V3.4.331] on usb-0000:00:1d.1-1.1 [ 30.092562] usbcore: registered new interface driver usbkbd [ 30.092566] /build/buildd/linux-2.6.24/drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver [ 30.097680] usbcore: registered new interface driver usbserial [ 30.097691] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 30.097719] usbcore: registered new interface driver usbserial_generic [ 30.097721] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 30.183950] vga16fb: initializing [ 30.183954] vga16fb: mapped to 0xc00a0000 [ 30.183981] fb0: VGA16 VGA frame buffer device [ 30.276144] Console: switching to colour frame buffer device 80x30 [ 40.819502] usbcore: registered new interface driver libusual [ 40.820755] Initializing USB Mass Storage driver... [ 40.820773] usbcore: registered new interface driver usb-storage [ 40.820775] USB Mass Storage support registered. [ 40.883035] Intel ISA PCIC probe: not found. [ 42.037020] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 42.040529] Unable to load NLS charset cp437 [ 42.044012] Unable to load NLS charset cp437 [ 42.096074] ISO 9660 Extensions: RRIP_1991A [ 62.225226] Intel ISA PCIC probe: not found. [ 75.818125] Intel ISA PCIC probe: not found. [ 167.541784] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 167.541787] Copyright (c) 1999-2006 Intel Corporation. [ 172.970380] Intel ISA PCIC probe: not found.