[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29 [ 0.000000] Linux version 4.15.0-29-generic (buildd@lgw01-amd64-057) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #31-Ubuntu SMP Tue Jul 17 15:39:52 UTC 2018 (Ubuntu 4.15.0-29.31-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=685d8a30-d337-41e9-9ee6-eb03a50e3745 ro quiet splash nopti vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3R/P35-DS3R, BIOS F13 06/19/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 130000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5160-0x000f516f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Kernel/User page tables isolation: disabled on command line. [ 0.000000] BRK [0x7c73f000, 0x7c73ffff] PGTABLE [ 0.000000] BRK [0x7c740000, 0x7c740fff] PGTABLE [ 0.000000] BRK [0x7c741000, 0x7c741fff] PGTABLE [ 0.000000] BRK [0x7c742000, 0x7c742fff] PGTABLE [ 0.000000] BRK [0x7c743000, 0x7c743fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x30849000-0x3441bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6B50 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFEE3040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFEE3180 004B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000CFEE0000 000040 [ 0.000000] ACPI: HPET 0x00000000CFEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFEE7E80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x00000000CFEE7D00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000CFEE8520 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12ffd1000-0x12fffbfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfedffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.000000] On node 0 totalpages: 1048188 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13244 pages used for memmap [ 0.000000] DMA32 zone: 847584 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031787 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=685d8a30-d337-41e9-9ee6-eb03a50e3745 ro quiet splash nopti vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3970988K/4192752K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 221764K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39092 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2666.838 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.67 BogoMIPS (lpj=10667352) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.028561] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.029421] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.029463] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.029497] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.029782] CPU: Physical Processor ID: 0 [ 0.029783] CPU: Processor Core ID: 0 [ 0.029784] mce: CPU supports 6 MCE banks [ 0.029791] CPU0: Thermal monitoring enabled (TM2) [ 0.029793] process: using mwait in idle threads [ 0.029797] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.029798] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.029800] Spectre V2 : Mitigation: Full generic retpoline [ 0.029801] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.029801] Speculative Store Bypass: Vulnerable [ 0.029934] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.036000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.036000] ... version: 2 [ 0.036000] ... bit width: 40 [ 0.036000] ... generic registers: 2 [ 0.036000] ... value mask: 000000ffffffffff [ 0.036000] ... max period: 000000007fffffff [ 0.036000] ... fixed-purpose events: 3 [ 0.036000] ... event mask: 0000000700000003 [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.040112] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.040139] smp: Brought up 1 node, 2 CPUs [ 0.040139] smpboot: Max logical packages: 2 [ 0.040139] smpboot: Total of 2 processors activated (10667.35 BogoMIPS) [ 0.044272] devtmpfs: initialized [ 0.044272] x86/mm: Memory block size: 128MB [ 0.044630] evm: security.selinux [ 0.044631] evm: security.SMACK64 [ 0.044632] evm: security.SMACK64EXEC [ 0.044633] evm: security.SMACK64TRANSMUTE [ 0.044633] evm: security.SMACK64MMAP [ 0.044634] evm: security.apparmor [ 0.044635] evm: security.ima [ 0.044635] evm: security.capability [ 0.044702] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes) [ 0.044740] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.044740] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.044740] pinctrl core: initialized pinctrl subsystem [ 0.044740] RTC time: 16:02:22, date: 07/21/18 [ 0.044740] NET: Registered protocol family 16 [ 0.044740] audit: initializing netlink subsys (disabled) [ 0.044740] audit: type=2000 audit(1532188942.044:1): state=initialized audit_enabled=0 res=1 [ 0.044740] cpuidle: using governor ladder [ 0.044740] cpuidle: using governor menu [ 0.044740] ACPI: bus type PCI registered [ 0.044740] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.044740] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.044740] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.044740] PCI: Using configuration type 1 for base access [ 0.048031] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.048087] ACPI: Added _OSI(Module Device) [ 0.048088] ACPI: Added _OSI(Processor Device) [ 0.048089] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.048090] ACPI: Added _OSI(Processor Aggregator Device) [ 0.048091] ACPI: Added _OSI(Linux-Dell-Video) [ 0.052273] ACPI: Dynamic OEM Table Load: [ 0.052280] ACPI: SSDT 0xFFFF964BAA58DC00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.052544] ACPI: Dynamic OEM Table Load: [ 0.052548] ACPI: SSDT 0xFFFF964BAA5E8E00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.052977] ACPI: Interpreter enabled [ 0.052998] ACPI: (supports S0 S3 S4 S5) [ 0.053000] ACPI: Using IOAPIC for interrupt routing [ 0.053033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.053262] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.061968] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.061974] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.061979] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.062293] PCI host bridge to bus 0000:00 [ 0.062296] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.062297] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.062299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.062301] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.062302] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window] [ 0.062304] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.062312] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.062431] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.062467] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.062582] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.062621] pci 0000:00:1a.0: reg 0x20: [io 0xe100-0xe11f] [ 0.062752] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.062790] pci 0000:00:1a.1: reg 0x20: [io 0xe200-0xe21f] [ 0.062921] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.062959] pci 0000:00:1a.2: reg 0x20: [io 0xe000-0xe01f] [ 0.063094] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.063111] pci 0000:00:1a.7: reg 0x10: [mem 0xf9104000-0xf91043ff] [ 0.063276] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.063294] pci 0000:00:1b.0: reg 0x10: [mem 0xf9100000-0xf9103fff 64bit] [ 0.063356] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.063465] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.063530] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.063643] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.063708] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.063817] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.063881] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.063993] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.064035] pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f] [ 0.064168] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.064206] pci 0000:00:1d.1: reg 0x20: [io 0xe400-0xe41f] [ 0.064336] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.064374] pci 0000:00:1d.2: reg 0x20: [io 0xe500-0xe51f] [ 0.064507] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.064525] pci 0000:00:1d.7: reg 0x10: [mem 0xf9105000-0xf91053ff] [ 0.064690] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.064834] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.064908] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.064912] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.064915] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.064918] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.065038] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.065054] pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607] [ 0.065060] pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703] [ 0.065066] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807] [ 0.065073] pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903] [ 0.065079] pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f] [ 0.065086] pci 0000:00:1f.2: reg 0x24: [mem 0xf9106000-0xf91067ff] [ 0.065122] pci 0000:00:1f.2: PME# supported from D3hot [ 0.065220] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.065236] pci 0000:00:1f.3: reg 0x10: [mem 0xf9107000-0xf91070ff 64bit] [ 0.065253] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.065397] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000 [ 0.065414] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff] [ 0.065423] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.065433] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref] [ 0.065440] pci 0000:01:00.0: reg 0x24: [io 0xb000-0xb07f] [ 0.065446] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.065540] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300 [ 0.065554] pci 0000:01:00.1: reg 0x10: [mem 0xf6000000-0xf6003fff] [ 0.065681] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.065683] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.065685] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.065688] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.065727] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.065730] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.065813] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601 [ 0.065903] pci 0000:03:00.0: reg 0x24: [mem 0xf9000000-0xf9001fff] [ 0.065970] pci 0000:03:00.0: PME# supported from D3hot [ 0.066043] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.066070] pci 0000:03:00.1: reg 0x10: [io 0xc000-0xc007] [ 0.066082] pci 0000:03:00.1: reg 0x14: [io 0xc100-0xc103] [ 0.066094] pci 0000:03:00.1: reg 0x18: [io 0xc200-0xc207] [ 0.066106] pci 0000:03:00.1: reg 0x1c: [io 0xc300-0xc303] [ 0.066119] pci 0000:03:00.1: reg 0x20: [io 0xc400-0xc40f] [ 0.066234] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.066243] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.066246] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.066249] pci 0000:00:1c.3: bridge window [mem 0xf9000000-0xf90fffff] [ 0.066310] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.066340] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.066368] pci 0000:04:00.0: reg 0x18: [mem 0xf8000000-0xf8000fff 64bit] [ 0.066401] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.066410] pci 0000:04:00.0: enabling Extended Tags [ 0.066495] pci 0000:04:00.0: supports D1 D2 [ 0.066496] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.066562] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.066570] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.066573] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.066576] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.066645] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.066648] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 0.066654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.066656] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.066657] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.066659] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.066661] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode) [ 0.067497] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.067590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.067681] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.067772] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.067863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.067954] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.068051] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.068143] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.068536] SCSI subsystem initialized [ 0.068548] libata version 3.00 loaded. [ 0.068548] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.068548] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.068548] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.068548] vgaarb: loaded [ 0.068548] ACPI: bus type USB registered [ 0.068548] usbcore: registered new interface driver usbfs [ 0.068548] usbcore: registered new interface driver hub [ 0.068548] usbcore: registered new device driver usb [ 0.068548] EDAC MC: Ver: 3.0.0 [ 0.068548] PCI: Using ACPI for IRQ routing [ 0.069169] PCI: pci_cache_line_size set to 64 bytes [ 0.069218] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.069219] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff] [ 0.069323] NetLabel: Initializing [ 0.069324] NetLabel: domain hash size = 128 [ 0.069324] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.069341] NetLabel: unlabeled traffic allowed by default [ 0.069359] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.069359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.069359] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.072017] clocksource: Switched to clocksource hpet [ 0.088313] VFS: Disk quotas dquot_6.6.0 [ 0.088335] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.088478] AppArmor: AppArmor Filesystem Enabled [ 0.088515] pnp: PnP ACPI init [ 0.088775] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.088777] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.088779] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.088781] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.088783] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.088789] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.088890] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.089079] pnp 00:02: [dma 2] [ 0.089114] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.089461] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.089540] system 00:04: [io 0x0400-0x04bf] could not be reserved [ 0.089545] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.089845] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.089850] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.090159] system 00:06: [mem 0x000d6000-0x000d7fff] has been reserved [ 0.090161] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.090163] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.090165] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.090167] system 00:06: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.090169] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.090171] system 00:06: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.090173] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.090175] system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.090177] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.090179] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.090181] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.090183] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 0.090185] system 00:06: [mem 0x000e0000-0x000effff] has been reserved [ 0.090189] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.090196] pnp: PnP ACPI: found 7 devices [ 0.096808] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.096825] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.096827] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.096834] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.096841] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.096854] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 0.096859] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.096863] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf9600000-0xf97fffff 64bit pref] [ 0.096867] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9800000-0xf99fffff 64bit pref] [ 0.096870] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf507ffff pref] [ 0.096873] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.096875] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.096878] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff] [ 0.096880] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.096883] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.096886] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.096889] pci 0000:00:1c.0: bridge window [mem 0xf9200000-0xf93fffff] [ 0.096892] pci 0000:00:1c.0: bridge window [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.096897] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.096899] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.096903] pci 0000:00:1c.3: bridge window [mem 0xf9000000-0xf90fffff] [ 0.096905] pci 0000:00:1c.3: bridge window [mem 0xf9600000-0xf97fffff 64bit pref] [ 0.096911] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref] [ 0.096912] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.096914] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.096918] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff] [ 0.096921] pci 0000:00:1c.4: bridge window [mem 0xf9800000-0xf99fffff 64bit pref] [ 0.096926] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.096928] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 0.096937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.096938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.096940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.096941] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.096943] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window] [ 0.096944] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.096946] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff] [ 0.096948] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref] [ 0.096949] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.096951] pci_bus 0000:02: resource 1 [mem 0xf9200000-0xf93fffff] [ 0.096952] pci_bus 0000:02: resource 2 [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.096954] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.096955] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff] [ 0.096957] pci_bus 0000:03: resource 2 [mem 0xf9600000-0xf97fffff 64bit pref] [ 0.096958] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.096960] pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf8ffffff] [ 0.096961] pci_bus 0000:04: resource 2 [mem 0xf9800000-0xf99fffff 64bit pref] [ 0.096963] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 0.096965] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.096966] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.096968] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.096969] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.096971] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff window] [ 0.097063] NET: Registered protocol family 2 [ 0.097409] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.097576] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.097862] TCP: Hash tables configured (established 32768 bind 32768) [ 0.097935] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.097974] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.098053] NET: Registered protocol family 1 [ 0.099211] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.099220] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.099224] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.099229] PCI: CLS 32 bytes, default 64 [ 0.099269] Unpacking initramfs... [ 1.044218] Freeing initrd memory: 61260K [ 1.044314] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.044318] software IO TLB [mem 0xcbee0000-0xcfee0000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.044476] Scanning for low memory corruption every 60 seconds [ 1.045166] Initialise system trusted keyrings [ 1.045177] Key type blacklist registered [ 1.045240] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.046879] zbud: loaded [ 1.047422] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.047609] fuse init (API version 7.26) [ 1.048945] Key type asymmetric registered [ 1.048947] Asymmetric key parser 'x509' registered [ 1.048981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.049013] io scheduler noop registered [ 1.049014] io scheduler deadline registered [ 1.049069] io scheduler cfq registered (default) [ 1.049899] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.049899] vesafb: scrolling: redraw [ 1.049901] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.049913] vesafb: framebuffer at 0xe1000000, mapped to 0x (ptrval), using 5120k, total 5120k [ 1.050028] Console: switching to colour frame buffer device 160x64 [ 1.050060] fb0: VESA VGA frame buffer device [ 1.050076] intel_idle: does not run on family 6 model 23 [ 1.050170] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.050183] ACPI: Power Button [PWRB] [ 1.050234] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.050255] ACPI: Power Button [PWRF] [ 1.050551] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.052795] Linux agpgart interface v0.103 [ 1.054550] loop: module loaded [ 1.054754] libphy: Fixed MDIO Bus: probed [ 1.054756] tun: Universal TUN/TAP device driver, 1.6 [ 1.054788] PPP generic driver version 2.4.2 [ 1.054829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.054832] ehci-pci: EHCI PCI platform driver [ 1.054939] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.054948] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.058868] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.058888] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9104000 [ 1.072014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.072063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.072066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.072068] usb usb1: Product: EHCI Host Controller [ 1.072070] usb usb1: Manufacturer: Linux 4.15.0-29-generic ehci_hcd [ 1.072072] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.072190] hub 1-0:1.0: USB hub found [ 1.072198] hub 1-0:1.0: 6 ports detected [ 1.072438] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.072443] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.076355] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.076365] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9105000 [ 1.092018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.092058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.092060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.092063] usb usb2: Product: EHCI Host Controller [ 1.092064] usb usb2: Manufacturer: Linux 4.15.0-29-generic ehci_hcd [ 1.092066] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.092175] hub 2-0:1.0: USB hub found [ 1.092181] hub 2-0:1.0: 6 ports detected [ 1.092332] ehci-platform: EHCI generic platform driver [ 1.092340] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.092343] ohci-pci: OHCI PCI platform driver [ 1.092353] ohci-platform: OHCI generic platform driver [ 1.092359] uhci_hcd: USB Universal Host Controller Interface driver [ 1.092439] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.092444] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.092449] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.092473] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 1.092515] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.092517] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.092519] usb usb3: Product: UHCI Host Controller [ 1.092520] usb usb3: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.092522] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.092622] hub 3-0:1.0: USB hub found [ 1.092629] hub 3-0:1.0: 2 ports detected [ 1.092802] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.092806] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.092814] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.092835] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 1.092881] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.092883] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.092884] usb usb4: Product: UHCI Host Controller [ 1.092886] usb usb4: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.092887] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.092980] hub 4-0:1.0: USB hub found [ 1.092986] hub 4-0:1.0: 2 ports detected [ 1.093150] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.093157] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.093162] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.093178] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 1.093221] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.093223] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.093225] usb usb5: Product: UHCI Host Controller [ 1.093226] usb usb5: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.093228] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.093318] hub 5-0:1.0: USB hub found [ 1.093324] hub 5-0:1.0: 2 ports detected [ 1.093487] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.093492] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.093498] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.093514] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 1.093555] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.093557] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.093559] usb usb6: Product: UHCI Host Controller [ 1.093560] usb usb6: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.093562] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.093653] hub 6-0:1.0: USB hub found [ 1.093659] hub 6-0:1.0: 2 ports detected [ 1.093823] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.093828] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.093834] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.093855] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 1.093897] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.093899] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.093901] usb usb7: Product: UHCI Host Controller [ 1.093902] usb usb7: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.093904] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.093995] hub 7-0:1.0: USB hub found [ 1.094001] hub 7-0:1.0: 2 ports detected [ 1.094161] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.094166] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.094172] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.094189] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 1.094230] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.094232] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.094233] usb usb8: Product: UHCI Host Controller [ 1.094235] usb usb8: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.094236] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.094328] hub 8-0:1.0: USB hub found [ 1.094334] hub 8-0:1.0: 2 ports detected [ 1.094474] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.094474] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.094612] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.094711] mousedev: PS/2 mouse device common for all mice [ 1.094844] rtc_cmos 00:01: RTC can wake from S4 [ 1.094944] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.094965] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.094973] i2c /dev entries driver [ 1.095022] device-mapper: uevent: version 1.0.3 [ 1.095085] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.095104] ledtrig-cpu: registered to indicate activity on CPUs [ 1.095442] NET: Registered protocol family 10 [ 1.099892] Segment Routing with IPv6 [ 1.099911] NET: Registered protocol family 17 [ 1.099946] Key type dns_resolver registered [ 1.100118] RAS: Correctable Errors collector initialized. [ 1.100146] microcode: sig=0x10676, pf=0x1, revision=0x60f [ 1.100186] microcode: Microcode Update Driver: v2.2. [ 1.100195] sched_clock: Marking stable (1100182075, 0)->(1181430707, -81248632) [ 1.100349] registered taskstats version 1 [ 1.100360] Loading compiled-in X.509 certificates [ 1.103255] Loaded X.509 cert 'Build time autogenerated kernel key: 1cc37f41791529df57507d3747a6804ab53f482b' [ 1.103271] zswap: loaded using pool lzo/zbud [ 1.107081] Key type big_key registered [ 1.107084] Key type trusted registered [ 1.108977] Key type encrypted registered [ 1.108980] AppArmor: AppArmor sha1 policy hashing enabled [ 1.108983] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.109001] evm: HMAC attrs: 0x1 [ 1.109282] Magic number: 10:243:35 [ 1.109295] bdi 7:0: hash matches [ 1.109407] rtc_cmos 00:01: setting system clock to 2018-07-21 16:02:23 UTC (1532188943) [ 1.109689] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.109690] EDD information not available. [ 1.113495] Freeing unused kernel memory: 2408K [ 1.125828] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.132031] Write protecting the kernel read-only data: 20480k [ 1.132853] Freeing unused kernel memory: 2008K [ 1.137911] Freeing unused kernel memory: 1904K [ 1.146894] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.241752] ipmi message handler version 39.2 [ 1.243052] ipmi device interface [ 1.258367] Floppy drive(s): fd0 is 1.44M [ 1.270377] ahci 0000:00:1f.2: version 3.0 [ 1.270569] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.270599] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.270602] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 1.270722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.270730] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.271106] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x (ptrval), 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [ 1.271108] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.279848] FDC 0 is a post-1991 82077 [ 1.279928] scsi host0: pata_jmicron [ 1.291957] nvidia: loading out-of-tree module taints kernel. [ 1.291967] nvidia: module license 'NVIDIA' taints kernel. [ 1.291968] Disabling lock debugging due to kernel taint [ 1.292770] scsi host1: pata_jmicron [ 1.292859] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 1.292860] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 1.312207] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 1.322434] nvidia-nvlink: Nvlink Core is being initialized, major device number 243 [ 1.322879] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 1.323003] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts) [ 1.326249] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.48 Wed Mar 21 23:48:34 PDT 2018 [ 1.326988] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 1.326990] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 1.329843] scsi host2: ahci [ 1.330012] scsi host3: ahci [ 1.330106] scsi host4: ahci [ 1.330196] scsi host5: ahci [ 1.330299] scsi host6: ahci [ 1.330399] scsi host7: ahci [ 1.330448] ata3: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106100 irq 24 [ 1.330450] ata4: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106180 irq 24 [ 1.330451] ata5: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106200 irq 24 [ 1.330453] ata6: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106280 irq 24 [ 1.330454] ata7: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106300 irq 24 [ 1.330456] ata8: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106380 irq 24 [ 1.340694] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.340698] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.341025] scsi host8: ahci [ 1.341114] scsi host9: ahci [ 1.341164] ata9: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 19 [ 1.341167] ata10: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 19 [ 1.454758] ata1.00: ATAPI: PLEXTOR CD-R PX-W4824A, 1.07, max UDMA/33 [ 1.457608] ata1.00: configured for UDMA/33 [ 1.459317] scsi 0:0:0:0: CD-ROM PLEXTOR CD-R PX-W4824A 1.07 PQ: 0 ANSI: 5 [ 1.512950] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.512952] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.513082] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.513144] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.563982] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 1.654195] ata9: SATA link down (SStatus 0 SControl 300) [ 1.654226] ata10: SATA link down (SStatus 0 SControl 300) [ 1.752004] usb 8-2: New USB device found, idVendor=0461, idProduct=4d22 [ 1.752007] usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.752009] usb 8-2: Product: USB Optical Mouse [ 1.758524] hidraw: raw HID events driver (C) Jiri Kosina [ 1.773209] usbcore: registered new interface driver usbhid [ 1.773210] usbhid: USB HID core driver [ 1.775126] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:0461:4D22.0001/input/input3 [ 1.775228] hid-generic 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 1.803976] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.804304] ata3.00: ATA-9: M4-CT128M4SSD2, 040H, max UDMA/100 [ 1.804306] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.804685] ata3.00: configured for UDMA/100 [ 1.804823] scsi 2:0:0:0: Direct-Access ATA M4-CT128M4SSD2 040H PQ: 0 ANSI: 5 [ 1.805005] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.805079] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.805092] sd 2:0:0:0: [sda] Write Protect is off [ 1.805094] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.805115] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.805661] sda: sda1 sda2 [ 1.805959] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.075954] tsc: Refined TSC clocksource calibration: 2666.666 MHz [ 2.075960] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns [ 2.118174] ata4: SATA link down (SStatus 0 SControl 300) [ 2.591954] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.593930] ata5.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.09, max UDMA/66 [ 2.595866] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 2.658819] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.09 PQ: 0 ANSI: 5 [ 2.803147] sr 4:0:0:0: [sr1] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.803288] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 2.803359] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 3.099994] clocksource: Switched to clocksource tsc [ 3.118141] ata6: SATA link down (SStatus 0 SControl 300) [ 3.430093] ata7: SATA link down (SStatus 0 SControl 300) [ 3.742093] ata8: SATA link down (SStatus 0 SControl 300) [ 3.884258] random: fast init done [ 3.884313] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.884333] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.884349] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.914448] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.914455] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.914540] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.914704] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.956422] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.956438] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.956441] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.101236] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.276110] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.285984] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.304016] systemd[1]: Detected architecture x86-64. [ 4.305661] systemd[1]: Set hostname to . [ 4.470762] systemd[1]: Created slice User and Session Slice. [ 4.470833] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.470846] systemd[1]: Reached target User and Group Name Lookups. [ 4.470860] systemd[1]: Reached target System Time Synchronized. [ 4.471013] systemd[1]: Created slice System Slice. [ 4.471083] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.471144] systemd[1]: Listening on Syslog Socket. [ 4.530573] lp: driver loaded but no devices found [ 4.540526] ppdev: user-space parallel port driver [ 4.550596] EXT4-fs (sda1): re-mounted. Opts: discard,nobarrier,errors=remount-ro [ 4.550681] RPC: Registered named UNIX socket transport module. [ 4.550682] RPC: Registered udp transport module. [ 4.550683] RPC: Registered tcp transport module. [ 4.550684] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.566256] it87: Found IT8718F chip at 0x290, revision 4 [ 4.566265] it87: VID is disabled (pins used for GPIO) [ 4.566273] it87: Beeping is supported [ 4.585929] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.619590] systemd-journald[314]: Received request to flush runtime journal from PID 1 [ 4.884373] audit: type=1400 audit(1532188947.270:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=469 comm="apparmor_parser" [ 4.884380] audit: type=1400 audit(1532188947.270:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=469 comm="apparmor_parser" [ 4.884383] audit: type=1400 audit(1532188947.270:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=469 comm="apparmor_parser" [ 4.884385] audit: type=1400 audit(1532188947.270:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser" [ 4.890186] audit: type=1400 audit(1532188947.274:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=468 comm="apparmor_parser" [ 4.890189] audit: type=1400 audit(1532188947.274:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=468 comm="apparmor_parser" [ 4.897495] audit: type=1400 audit(1532188947.282:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=472 comm="apparmor_parser" [ 4.897498] audit: type=1400 audit(1532188947.282:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=472 comm="apparmor_parser" [ 4.897500] audit: type=1400 audit(1532188947.282:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=472 comm="apparmor_parser" [ 5.071698] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.120649] kauditd_printk_skb: 26 callbacks suppressed [ 5.120651] audit: type=1400 audit(1532188947.506:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=484 comm="apparmor_parser" [ 5.163864] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241 [ 5.190923] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 5.190930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.190960] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.387852] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.387860] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.463128] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 5.463612] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 5.469990] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.469992] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.469994] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.469996] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 5.469997] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 5.469999] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 5.470001] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 5.470003] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 5.470004] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 5.470006] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 5.470007] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 5.481344] intel_powerclamp: No package C-state available [ 5.553075] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 5.553134] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 5.553192] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 5.553251] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 5.553311] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.553367] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.553422] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.612171] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 5.757048] Adding 2097148k swap on /dev/sda2. Priority:-2 extents:1 across:2097148k SSFS [ 5.841730] random: crng init done [ 6.077446] NVRM: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. [ 6.256777] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 6.260181] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 6.260414] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 6.260494] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 6.484125] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.491308] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 6.491480] NFSD: starting 90-second grace period (net f0000099) [ 6.497249] r8169 0000:04:00.0 eth0: link down [ 6.497365] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.850633] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 6.851021] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs [ 7.055880] nvidia-modeset: Allocated GPU:0 (GPU-cc5702da-7aaa-feed-44c9-50cdb2ac19df) @ PCI:0000:01:00.0 [ 8.838007] r8169 0000:04:00.0 eth0: link up [ 8.838019] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.569438] rfkill: input handler disabled [ 17.256820] print_req_error: I/O error, dev fd0, sector 0 [ 17.256826] floppy: error 10 while reading block 0 [ 29.516126] print_req_error: I/O error, dev fd0, sector 0 [ 29.516132] floppy: error 10 while reading block 0 [ 41.784557] print_req_error: I/O error, dev fd0, sector 0 [ 41.784562] floppy: error 10 while reading block 0 [ 726.226027] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.025 msecs [ 726.226031] perf: interrupt took too long (9188 > 2500), lowering kernel.perf_event_max_sample_rate to 21750 [ 4830.471555] PM: suspend entry (deep) [ 4830.471557] PM: Syncing filesystems ... done. [ 4830.766856] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 4830.769971] OOM killer disabled. [ 4830.769971] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4830.771173] Suspending console(s) (use no_console_suspend to debug) [ 4830.799588] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 4830.819914] sd 2:0:0:0: [sda] Stopping disk [ 4831.364393] ACPI: Preparing to enter system sleep state S3 [ 4831.367033] PM: Saving platform NVS memory [ 4831.367065] Disabling non-boot CPUs ... [ 4831.388841] smpboot: CPU 1 is now offline [ 4831.391227] ACPI: Low-level resume complete [ 4831.391274] PM: Restoring platform NVS memory [ 4831.397366] Enabling non-boot CPUs ... [ 4831.397420] x86: Booting SMP configuration: [ 4831.397421] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4831.406075] cache: parent cpu1 should not be sleeping [ 4831.406169] microcode: sig=0x10676, pf=0x1, revision=0x0 [ 4831.411924] microcode: updated to revision 0x60f, date = 2010-09-29 [ 4831.412254] CPU1 is up [ 4831.415014] ACPI: Waking up from system sleep state S3 [ 4831.454354] usb usb3: root hub lost power or was reset [ 4831.454390] usb usb4: root hub lost power or was reset [ 4831.454421] usb usb5: root hub lost power or was reset [ 4831.454468] usb usb6: root hub lost power or was reset [ 4831.454506] usb usb7: root hub lost power or was reset [ 4831.454531] usb usb8: root hub lost power or was reset [ 4831.464672] rtc_cmos 00:01: Alarms can be up to one month in the future [ 4831.467754] sd 2:0:0:0: [sda] Starting disk [ 4831.780038] ata10: SATA link down (SStatus 0 SControl 300) [ 4831.780067] ata9: SATA link down (SStatus 0 SControl 300) [ 4831.836035] ata8: SATA link down (SStatus 0 SControl 300) [ 4831.836049] ata4: SATA link down (SStatus 0 SControl 300) [ 4831.836062] ata7: SATA link down (SStatus 0 SControl 300) [ 4831.836074] ata6: SATA link down (SStatus 0 SControl 300) [ 4831.949866] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [ 4831.997856] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4831.997869] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4831.998566] ata3.00: configured for UDMA/100 [ 4832.001627] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 4832.472597] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 4832.472599] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 4832.475443] ata1.00: configured for UDMA/33 [ 4834.481826] floppy driver state [ 4834.481826] ------------------- [ 4834.481835] now=4296100928 last interrupt=4294902745 diff=1198183 last called handler=recal_interrupt [floppy] [ 4834.481835] timeout_message=lock fdc [ 4834.481836] last output bytes: [ 4834.481837] c1 90 4294902390 [ 4834.481838] 10 90 4294902390 [ 4834.481839] 7 80 4294902390 [ 4834.481840] 0 90 4294902390 [ 4834.481841] 8 81 4294902470 [ 4834.481841] 3 80 4294902476 [ 4834.481842] d1 90 4294902476 [ 4834.481843] a 90 4294902476 [ 4834.481844] 7 90 4294902476 [ 4834.481845] 0 90 4294902476 [ 4834.481846] 8 81 4294902577 [ 4834.481847] 3 80 4294902583 [ 4834.481848] c1 90 4294902583 [ 4834.481849] 10 90 4294902583 [ 4834.481849] 7 80 4294902583 [ 4834.481850] 0 90 4294902583 [ 4834.481851] 8 81 4294902663 [ 4834.481852] 7 80 4294902664 [ 4834.481853] 0 90 4294902664 [ 4834.481854] 8 81 4294902745 [ 4834.481854] last result at 4294902745 [ 4834.481855] last redo_fd_request at 4294902745 [ 4834.481856] 70 00 p. [ 4834.481862] status=0 [ 4834.481862] fdc_busy=1 [ 4834.481865] do_floppy=reset_interrupt [floppy] [ 4834.481867] cont=00000000ef40eb85 [ 4834.481868] current_req= (null) [ 4834.481868] command_status=-1 [ 4834.481871] floppy0: floppy timeout called [ 4834.482832] OOM killer enabled. [ 4834.482833] Restarting tasks ... [ 4834.482881] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 4834.482885] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4834.490824] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 4834.490829] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4834.490882] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 4834.490884] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4834.490931] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 4834.490933] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4834.490979] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 4834.490981] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4834.491021] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 4834.491024] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4834.508238] done. [ 4834.515869] PM: suspend exit [ 4834.611388] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4834.627151] r8169 0000:04:00.0 eth0: link down [ 4834.627211] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4836.877823] do_IRQ: 1.38 No irq handler for vector [ 4847.525071] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4847.525247] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4847.526539] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x0000000081547aae, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [ 4847.526542] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 4847.563793] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4847.575004] r8169 0000:04:00.0 eth0: link down [ 4847.575078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4850.551026] r8169 0000:04:00.0 eth0: link up [ 4850.551037] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4854.705649] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [ 4854.705656] ------------[ cut here ]------------ [ 4854.705656] Memory corruption detected in low memory [ 4854.705668] WARNING: CPU: 0 PID: 3521 at /build/linux-60XibS/linux-4.15.0/arch/x86/kernel/check.c:142 check_for_bios_corruption+0xab/0x100 [ 4854.705669] Modules linked in: r8169 isofs udf crc_itu_t snd_hda_codec_hdmi gpio_ich snd_hda_codec_realtek snd_hda_codec_generic kvm_intel kvm snd_hda_intel irqbypass snd_hda_codec snd_hda_core snd_hwdep snd_pcm input_leds serio_raw snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq lpc_ich snd_seq_device snd_timer nvidia_uvm(POE) snd soundcore shpchp mac_hid binfmt_misc sch_fq_codel nfsd cuse auth_rpcgss it87 hwmon_vid nfs_acl coretemp lockd grace parport_pc ppdev lp parport sunrpc ip_tables x_tables autofs4 pata_acpi hid_generic usbhid hid nvidia_drm(POE) nvidia_modeset(POE) nvidia(POE) drm_kms_helper syscopyarea ahci mii libahci pata_jmicron sysfillrect sysimgblt fb_sys_fops floppy drm ipmi_devintf ipmi_msghandler [last unloaded: r8169] [ 4854.705727] CPU: 0 PID: 3521 Comm: kworker/0:1 Tainted: P OE 4.15.0-29-generic #31-Ubuntu [ 4854.705728] Hardware name: Gigabyte Technology Co., Ltd. P35-DS3R/P35-DS3R, BIOS F13 06/19/2009 [ 4854.705731] Workqueue: events check_corruption [ 4854.705734] RIP: 0010:check_for_bios_corruption+0xab/0x100 [ 4854.705735] RSP: 0018:ffffb2b7435cfe38 EFLAGS: 00010282 [ 4854.705738] RAX: 0000000000000000 RBX: ffff964a80010000 RCX: 0000000000000006 [ 4854.705739] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff964bafc16490 [ 4854.705740] RBP: ffffb2b7435cfe68 R08: 0000000000000000 R09: 000000000000039f [ 4854.705742] R10: 0000000000000000 R11: ffffffffa075380d R12: 0000000000000000 [ 4854.705743] R13: ffffffffa072d4d0 R14: 0000000000000001 R15: 0000000080000000 [ 4854.705745] FS: 0000000000000000(0000) GS:ffff964bafc00000(0000) knlGS:0000000000000000 [ 4854.705747] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4854.705748] CR2: 00007f5d69ed0820 CR3: 00000000a5b1e000 CR4: 00000000000006f0 [ 4854.705749] Call Trace: [ 4854.705755] check_corruption+0xe/0x40 [ 4854.705758] process_one_work+0x1de/0x410 [ 4854.705760] worker_thread+0x32/0x410 [ 4854.705763] kthread+0x121/0x140 [ 4854.705765] ? process_one_work+0x410/0x410 [ 4854.705767] ? kthread_create_worker_on_cpu+0x70/0x70 [ 4854.705770] ? do_syscall_64+0x73/0x130 [ 4854.705772] ? SyS_exit_group+0x14/0x20 [ 4854.705775] ret_from_fork+0x35/0x40 [ 4854.705777] Code: c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 f3 c3 80 3d d0 31 5a 01 00 75 e6 48 c7 c7 b8 37 ec 9f c6 05 c0 31 5a 01 01 e8 35 f0 01 00 <0f> 0b eb cf 48 89 da 4c 01 fa 72 35 4c 89 c0 48 2b 05 b7 d5 3d [ 4854.705819] ---[ end trace 38d352fbb58c98a2 ]--- [ 5019.780400] PM: suspend entry (deep) [ 5019.780403] PM: Syncing filesystems ... done. [ 5020.055587] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 5020.057661] OOM killer disabled. [ 5020.057661] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5020.058873] Suspending console(s) (use no_console_suspend to debug) [ 5020.084566] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 5020.100672] sd 2:0:0:0: [sda] Stopping disk [ 5020.653362] ACPI: Preparing to enter system sleep state S3 [ 5020.655998] PM: Saving platform NVS memory [ 5020.656025] Disabling non-boot CPUs ... [ 5020.677784] smpboot: CPU 1 is now offline [ 5020.680125] ACPI: Low-level resume complete [ 5020.680172] PM: Restoring platform NVS memory [ 5020.686267] Enabling non-boot CPUs ... [ 5020.686327] x86: Booting SMP configuration: [ 5020.686328] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5020.689173] cache: parent cpu1 should not be sleeping [ 5020.695324] CPU1 is up [ 5020.698049] ACPI: Waking up from system sleep state S3 [ 5020.739336] usb usb3: root hub lost power or was reset [ 5020.739372] usb usb4: root hub lost power or was reset [ 5020.739405] usb usb5: root hub lost power or was reset [ 5020.739535] usb usb6: root hub lost power or was reset [ 5020.739549] usb usb7: root hub lost power or was reset [ 5020.739577] usb usb8: root hub lost power or was reset [ 5020.740675] sd 2:0:0:0: [sda] Starting disk [ 5020.749764] rtc_cmos 00:01: Alarms can be up to one month in the future [ 5021.065011] ata10: SATA link down (SStatus 0 SControl 300) [ 5021.065041] ata9: SATA link down (SStatus 0 SControl 300) [ 5021.113000] ata6: SATA link down (SStatus 0 SControl 300) [ 5021.113014] ata8: SATA link down (SStatus 0 SControl 300) [ 5021.113027] ata7: SATA link down (SStatus 0 SControl 300) [ 5021.113040] ata4: SATA link down (SStatus 0 SControl 300) [ 5021.234842] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [ 5021.274830] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5021.274843] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5021.275551] ata3.00: configured for UDMA/100 [ 5021.278588] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 5021.633578] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 5021.633581] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 5021.636423] ata1.00: configured for UDMA/33 [ 5023.922808] floppy driver state [ 5023.922808] ------------------- [ 5023.922817] now=4296148288 last interrupt=4294902745 diff=1245543 last called handler=recal_interrupt [floppy] [ 5023.922818] timeout_message=lock fdc [ 5023.922818] last output bytes: [ 5023.922820] c1 90 4294902390 [ 5023.922821] 10 90 4294902390 [ 5023.922822] 7 80 4294902390 [ 5023.922822] 0 90 4294902390 [ 5023.922823] 8 81 4294902470 [ 5023.922824] 3 80 4294902476 [ 5023.922825] d1 90 4294902476 [ 5023.922826] a 90 4294902476 [ 5023.922827] 7 90 4294902476 [ 5023.922828] 0 90 4294902476 [ 5023.922828] 8 81 4294902577 [ 5023.922829] 3 80 4294902583 [ 5023.922830] c1 90 4294902583 [ 5023.922831] 10 90 4294902583 [ 5023.922832] 7 80 4294902583 [ 5023.922833] 0 90 4294902583 [ 5023.922833] 8 81 4294902663 [ 5023.922834] 7 80 4294902664 [ 5023.922835] 0 90 4294902664 [ 5023.922836] 8 81 4294902745 [ 5023.922837] last result at 4294902745 [ 5023.922837] last redo_fd_request at 4296100928 [ 5023.922839] 70 00 p. [ 5023.922844] status=0 [ 5023.922845] fdc_busy=1 [ 5023.922848] do_floppy=reset_interrupt [floppy] [ 5023.922849] cont=00000000ef40eb85 [ 5023.922850] current_req= (null) [ 5023.922851] command_status=-1 [ 5023.922854] floppy0: floppy timeout called [ 5023.923815] OOM killer enabled. [ 5023.923816] Restarting tasks ... [ 5023.923863] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5023.923866] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5023.931725] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5023.931730] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5023.931785] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5023.931789] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5023.931856] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5023.931859] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5023.931910] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5023.931913] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5023.931955] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5023.931957] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5023.945990] done. [ 5023.951602] PM: suspend exit [ 5024.079661] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5024.092172] r8169 0000:04:00.0 eth0: link down [ 5024.092234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5026.381018] do_IRQ: 1.35 No irq handler for vector [ 5039.026728] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [ 5042.231870] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5042.231881] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 5042.232532] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x0000000081547aae, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [ 5042.232535] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 5042.269438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5042.279976] r8169 0000:04:00.0 eth0: link down [ 5042.280043] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5045.260920] r8169 0000:04:00.0 eth0: link up [ 5045.260931] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5069.022279] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 5069.037500] JFS: nTxBlock = 8192, nTxLock = 65536 [ 5069.052894] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 5069.080763] QNX4 filesystem 0.2.3 registered. [ 5069.140279] raid6: sse2x1 gen() 3344 MB/s [ 5069.188258] raid6: sse2x1 xor() 3262 MB/s [ 5069.236225] raid6: sse2x2 gen() 4059 MB/s [ 5069.284202] raid6: sse2x2 xor() 3984 MB/s [ 5069.332178] raid6: sse2x4 gen() 5855 MB/s [ 5069.380158] raid6: sse2x4 xor() 4451 MB/s [ 5069.380159] raid6: using algorithm sse2x4 gen() 5855 MB/s [ 5069.380160] raid6: .... xor() 4451 MB/s, rmw enabled [ 5069.380162] raid6: using ssse3x2 recovery algorithm [ 5069.382292] xor: measuring software checksum speed [ 5069.420132] prefetch64-sse: 7945.000 MB/sec [ 5069.460109] generic_sse: 7028.000 MB/sec [ 5069.460112] xor: using function: prefetch64-sse (7945.000 MB/sec) [ 5069.502547] Btrfs loaded, crc32c=crc32c-generic [ 5429.912382] PM: suspend entry (deep) [ 5429.912384] PM: Syncing filesystems ... done. [ 5430.191223] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 5430.193254] OOM killer disabled. [ 5430.193255] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5430.194485] Suspending console(s) (use no_console_suspend to debug) [ 5430.213453] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 5430.230877] sd 2:0:0:0: [sda] Stopping disk [ 5430.789897] ACPI: Preparing to enter system sleep state S3 [ 5430.791986] PM: Saving platform NVS memory [ 5430.792013] Disabling non-boot CPUs ... [ 5430.814319] smpboot: CPU 1 is now offline [ 5430.816684] ACPI: Low-level resume complete [ 5430.816731] PM: Restoring platform NVS memory [ 5430.822814] Enabling non-boot CPUs ... [ 5430.822866] x86: Booting SMP configuration: [ 5430.822867] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5430.825680] cache: parent cpu1 should not be sleeping [ 5430.831838] CPU1 is up [ 5430.834564] ACPI: Waking up from system sleep state S3 [ 5430.875827] usb usb3: root hub lost power or was reset [ 5430.875862] usb usb4: root hub lost power or was reset [ 5430.875898] usb usb5: root hub lost power or was reset [ 5430.875946] usb usb6: root hub lost power or was reset [ 5430.875985] usb usb7: root hub lost power or was reset [ 5430.876000] usb usb8: root hub lost power or was reset [ 5430.883559] sd 2:0:0:0: [sda] Starting disk [ 5430.886184] rtc_cmos 00:01: Alarms can be up to one month in the future [ 5431.201374] ata10: SATA link down (SStatus 0 SControl 300) [ 5431.201403] ata9: SATA link down (SStatus 0 SControl 300) [ 5431.273308] ata6: SATA link down (SStatus 0 SControl 300) [ 5431.273321] ata8: SATA link down (SStatus 0 SControl 300) [ 5431.273335] ata7: SATA link down (SStatus 0 SControl 300) [ 5431.273356] ata4: SATA link down (SStatus 0 SControl 300) [ 5431.371120] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [ 5431.435040] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5431.435751] ata3.00: configured for UDMA/100 [ 5431.439037] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5431.442817] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 5431.773653] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 5431.773655] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 5431.975271] ata1.00: configured for UDMA/33 [ 5434.101683] floppy driver state [ 5434.101683] ------------------- [ 5434.101692] now=4296250880 last interrupt=4294902745 diff=1348135 last called handler=recal_interrupt [floppy] [ 5434.101692] timeout_message=lock fdc [ 5434.101693] last output bytes: [ 5434.101694] c1 90 4294902390 [ 5434.101695] 10 90 4294902390 [ 5434.101696] 7 80 4294902390 [ 5434.101697] 0 90 4294902390 [ 5434.101698] 8 81 4294902470 [ 5434.101699] 3 80 4294902476 [ 5434.101699] d1 90 4294902476 [ 5434.101700] a 90 4294902476 [ 5434.101701] 7 90 4294902476 [ 5434.101702] 0 90 4294902476 [ 5434.101703] 8 81 4294902577 [ 5434.101704] 3 80 4294902583 [ 5434.101705] c1 90 4294902583 [ 5434.101706] 10 90 4294902583 [ 5434.101706] 7 80 4294902583 [ 5434.101707] 0 90 4294902583 [ 5434.101708] 8 81 4294902663 [ 5434.101709] 7 80 4294902664 [ 5434.101710] 0 90 4294902664 [ 5434.101711] 8 81 4294902745 [ 5434.101711] last result at 4294902745 [ 5434.101712] last redo_fd_request at 4296148288 [ 5434.101713] 70 00 p. [ 5434.101719] status=0 [ 5434.101719] fdc_busy=1 [ 5434.101722] do_floppy=reset_interrupt [floppy] [ 5434.101723] cont=00000000ef40eb85 [ 5434.101724] current_req= (null) [ 5434.101725] command_status=-1 [ 5434.101728] floppy0: floppy timeout called [ 5434.102688] OOM killer enabled. [ 5434.102689] Restarting tasks ... [ 5434.102736] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5434.102739] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5434.117635] done. [ 5434.117775] PM: suspend exit [ 5434.118095] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5434.118099] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5434.118154] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5434.118157] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5434.118208] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5434.118210] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5434.118257] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5434.118259] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5434.118315] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 5434.118318] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5434.255933] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5434.266901] r8169 0000:04:00.0 eth0: link down [ 5434.267064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5436.522570] do_IRQ: 1.35 No irq handler for vector [ 5446.825972] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5446.825986] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 5446.826516] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x0000000081547aae, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [ 5446.826519] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 5446.862539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5446.877686] r8169 0000:04:00.0 eth0: link down [ 5446.877782] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5449.858922] r8169 0000:04:00.0 eth0: link up [ 5449.858935] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5468.904513] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [ 9170.898160] PM: suspend entry (deep) [ 9170.898163] PM: Syncing filesystems ... done. [ 9171.145316] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 9171.147461] OOM killer disabled. [ 9171.147461] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9171.148655] Suspending console(s) (use no_console_suspend to debug) [ 9171.166071] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 9171.211098] sd 2:0:0:0: [sda] Stopping disk [ 9171.754854] ACPI: Preparing to enter system sleep state S3 [ 9171.756945] PM: Saving platform NVS memory [ 9171.756981] Disabling non-boot CPUs ... [ 9171.771283] smpboot: CPU 1 is now offline [ 9171.773606] ACPI: Low-level resume complete [ 9171.773653] PM: Restoring platform NVS memory [ 9171.779730] Enabling non-boot CPUs ... [ 9171.779782] x86: Booting SMP configuration: [ 9171.779783] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 9171.782590] cache: parent cpu1 should not be sleeping [ 9171.788755] CPU1 is up [ 9171.791479] ACPI: Waking up from system sleep state S3 [ 9171.832832] usb usb8: root hub lost power or was reset [ 9171.832896] usb usb5: root hub lost power or was reset [ 9171.832932] usb usb6: root hub lost power or was reset [ 9171.832970] usb usb3: root hub lost power or was reset [ 9171.833005] usb usb4: root hub lost power or was reset [ 9171.833123] usb usb7: root hub lost power or was reset [ 9171.833843] sd 2:0:0:0: [sda] Starting disk [ 9171.843672] rtc_cmos 00:01: Alarms can be up to one month in the future [ 9172.162503] ata10: SATA link down (SStatus 0 SControl 300) [ 9172.162532] ata9: SATA link down (SStatus 0 SControl 300) [ 9172.198436] ata7: SATA link down (SStatus 0 SControl 300) [ 9172.198449] ata4: SATA link down (SStatus 0 SControl 300) [ 9172.198495] ata8: SATA link down (SStatus 0 SControl 300) [ 9172.198508] ata6: SATA link down (SStatus 0 SControl 300) [ 9172.328331] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [ 9172.360319] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9172.360332] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9172.361040] ata3.00: configured for UDMA/100 [ 9172.364037] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 9172.727066] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 9172.727068] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 9172.729908] ata1.00: configured for UDMA/33 [ 9174.988286] floppy driver state [ 9174.988287] ------------------- [ 9174.988294] now=4297186112 last interrupt=4294902745 diff=2283367 last called handler=recal_interrupt [floppy] [ 9174.988295] timeout_message=lock fdc [ 9174.988296] last output bytes: [ 9174.988297] c1 90 4294902390 [ 9174.988298] 10 90 4294902390 [ 9174.988299] 7 80 4294902390 [ 9174.988300] 0 90 4294902390 [ 9174.988300] 8 81 4294902470 [ 9174.988301] 3 80 4294902476 [ 9174.988302] d1 90 4294902476 [ 9174.988303] a 90 4294902476 [ 9174.988304] 7 90 4294902476 [ 9174.988305] 0 90 4294902476 [ 9174.988306] 8 81 4294902577 [ 9174.988306] 3 80 4294902583 [ 9174.988307] c1 90 4294902583 [ 9174.988308] 10 90 4294902583 [ 9174.988309] 7 80 4294902583 [ 9174.988310] 0 90 4294902583 [ 9174.988311] 8 81 4294902663 [ 9174.988312] 7 80 4294902664 [ 9174.988313] 0 90 4294902664 [ 9174.988313] 8 81 4294902745 [ 9174.988314] last result at 4294902745 [ 9174.988315] last redo_fd_request at 4296250880 [ 9174.988316] 70 00 p. [ 9174.988322] status=0 [ 9174.988322] fdc_busy=1 [ 9174.988325] do_floppy=reset_interrupt [floppy] [ 9174.988326] cont=00000000ef40eb85 [ 9174.988328] current_req= (null) [ 9174.988328] command_status=-1 [ 9174.988331] floppy0: floppy timeout called [ 9174.989296] OOM killer enabled. [ 9174.989297] Restarting tasks ... [ 9174.989345] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9174.989348] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9175.007559] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9175.007564] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9175.007616] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9175.007619] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9175.007664] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9175.007667] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9175.007711] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9175.007714] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9175.007754] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9175.007756] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9175.009030] done. [ 9175.009069] PM: suspend exit [ 9175.125538] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9175.141588] r8169 0000:04:00.0 eth0: link down [ 9175.141656] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9177.413247] do_IRQ: 1.35 No irq handler for vector [ 9186.402638] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9186.402650] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 9186.403232] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x0000000081547aae, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [ 9186.403235] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 9186.439980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9186.453459] r8169 0000:04:00.0 eth0: link down [ 9186.453535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9189.428644] r8169 0000:04:00.0 eth0: link up [ 9189.428657] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9216.716938] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [ 9770.138035] PM: suspend entry (deep) [ 9770.138038] PM: Syncing filesystems ... done. [ 9770.379865] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9770.381693] OOM killer disabled. [ 9770.381694] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9770.382900] Suspending console(s) (use no_console_suspend to debug) [ 9770.401590] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 9770.414848] sd 2:0:0:0: [sda] Stopping disk [ 9770.966402] ACPI: Preparing to enter system sleep state S3 [ 9770.968491] PM: Saving platform NVS memory [ 9770.968518] Disabling non-boot CPUs ... [ 9770.982838] smpboot: CPU 1 is now offline [ 9770.985193] ACPI: Low-level resume complete [ 9770.985240] PM: Restoring platform NVS memory [ 9770.991332] Enabling non-boot CPUs ... [ 9770.991405] x86: Booting SMP configuration: [ 9770.991406] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 9770.994222] cache: parent cpu1 should not be sleeping [ 9771.000371] CPU1 is up [ 9771.003098] ACPI: Waking up from system sleep state S3 [ 9771.044365] usb usb3: root hub lost power or was reset [ 9771.044402] usb usb4: root hub lost power or was reset [ 9771.044431] usb usb5: root hub lost power or was reset [ 9771.044478] usb usb6: root hub lost power or was reset [ 9771.044516] usb usb7: root hub lost power or was reset [ 9771.044541] usb usb8: root hub lost power or was reset [ 9771.054682] rtc_cmos 00:01: Alarms can be up to one month in the future [ 9771.058071] sd 2:0:0:0: [sda] Starting disk [ 9771.370047] ata9: SATA link down (SStatus 0 SControl 300) [ 9771.370076] ata10: SATA link down (SStatus 0 SControl 300) [ 9771.430064] ata8: SATA link down (SStatus 0 SControl 300) [ 9771.430094] ata6: SATA link down (SStatus 0 SControl 300) [ 9771.430108] ata7: SATA link down (SStatus 0 SControl 300) [ 9771.430120] ata4: SATA link down (SStatus 0 SControl 300) [ 9771.539879] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [ 9771.591867] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9771.591880] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9771.592588] ata3.00: configured for UDMA/100 [ 9771.595554] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [ 9772.136359] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 9772.136361] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 9772.139201] ata1.00: configured for UDMA/33 [ 9774.279833] floppy driver state [ 9774.279833] ------------------- [ 9774.279841] now=4297335936 last interrupt=4294902745 diff=2433191 last called handler=recal_interrupt [floppy] [ 9774.279842] timeout_message=lock fdc [ 9774.279843] last output bytes: [ 9774.279844] c1 90 4294902390 [ 9774.279845] 10 90 4294902390 [ 9774.279846] 7 80 4294902390 [ 9774.279847] 0 90 4294902390 [ 9774.279847] 8 81 4294902470 [ 9774.279848] 3 80 4294902476 [ 9774.279849] d1 90 4294902476 [ 9774.279850] a 90 4294902476 [ 9774.279851] 7 90 4294902476 [ 9774.279852] 0 90 4294902476 [ 9774.279853] 8 81 4294902577 [ 9774.279853] 3 80 4294902583 [ 9774.279854] c1 90 4294902583 [ 9774.279855] 10 90 4294902583 [ 9774.279856] 7 80 4294902583 [ 9774.279857] 0 90 4294902583 [ 9774.279858] 8 81 4294902663 [ 9774.279859] 7 80 4294902664 [ 9774.279859] 0 90 4294902664 [ 9774.279860] 8 81 4294902745 [ 9774.279861] last result at 4294902745 [ 9774.279862] last redo_fd_request at 4297186112 [ 9774.279863] 70 00 p. [ 9774.279869] status=0 [ 9774.279869] fdc_busy=1 [ 9774.279872] do_floppy=reset_interrupt [floppy] [ 9774.279873] cont=00000000ef40eb85 [ 9774.279875] current_req= (null) [ 9774.279875] command_status=-1 [ 9774.279878] floppy0: floppy timeout called [ 9774.280838] OOM killer enabled. [ 9774.280839] Restarting tasks ... [ 9774.280886] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9774.280889] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9774.298608] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9774.298613] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9774.298665] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9774.298668] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9774.298719] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9774.298721] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9774.298779] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9774.298781] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9774.298822] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 9774.298824] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 9774.303799] done. [ 9774.311317] PM: suspend exit [ 9774.447913] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9774.461105] r8169 0000:04:00.0 eth0: link down [ 9774.461255] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9776.781892] do_IRQ: 1.35 No irq handler for vector [ 9789.070154] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9789.070167] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 9789.072195] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x0000000081547aae, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [ 9789.072199] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 9789.106532] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9789.116958] r8169 0000:04:00.0 eth0: link down [ 9789.117033] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9792.167422] r8169 0000:04:00.0 eth0: link up [ 9792.167435] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9831.111208] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [10552.444067] PM: suspend entry (deep) [10552.444069] PM: Syncing filesystems ... done. [10552.701076] Freezing user space processes ... (elapsed 0.002 seconds) done. [10552.703161] OOM killer disabled. [10552.703162] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10552.704360] Suspending console(s) (use no_console_suspend to debug) [10552.723166] sd 2:0:0:0: [sda] Synchronizing SCSI cache [10552.736373] sd 2:0:0:0: [sda] Stopping disk [10553.279856] ACPI: Preparing to enter system sleep state S3 [10553.281944] PM: Saving platform NVS memory [10553.281971] Disabling non-boot CPUs ... [10553.296289] smpboot: CPU 1 is now offline [10553.298644] ACPI: Low-level resume complete [10553.298691] PM: Restoring platform NVS memory [10553.304776] Enabling non-boot CPUs ... [10553.304848] x86: Booting SMP configuration: [10553.304849] smpboot: Booting Node 0 Processor 1 APIC 0x1 [10553.307670] cache: parent cpu1 should not be sleeping [10553.313837] CPU1 is up [10553.316564] ACPI: Waking up from system sleep state S3 [10553.357821] usb usb3: root hub lost power or was reset [10553.357858] usb usb4: root hub lost power or was reset [10553.357887] usb usb5: root hub lost power or was reset [10553.357934] usb usb6: root hub lost power or was reset [10553.357973] usb usb7: root hub lost power or was reset [10553.357997] usb usb8: root hub lost power or was reset [10553.368138] rtc_cmos 00:01: Alarms can be up to one month in the future [10553.371857] sd 2:0:0:0: [sda] Starting disk [10553.683505] ata10: SATA link down (SStatus 0 SControl 300) [10553.687496] ata9: SATA link down (SStatus 0 SControl 300) [10553.747501] ata6: SATA link down (SStatus 0 SControl 300) [10553.747532] ata7: SATA link down (SStatus 0 SControl 300) [10553.747546] ata4: SATA link down (SStatus 0 SControl 300) [10553.747558] ata8: SATA link down (SStatus 0 SControl 300) [10553.853333] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [10553.909323] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10553.909336] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10553.910033] ata3.00: configured for UDMA/100 [10553.913021] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [10554.449814] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [10554.449816] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [10554.452676] ata1.00: configured for UDMA/33 [10556.609287] floppy driver state [10556.609287] ------------------- [10556.609295] now=4297531520 last interrupt=4294902745 diff=2628775 last called handler=recal_interrupt [floppy] [10556.609296] timeout_message=lock fdc [10556.609296] last output bytes: [10556.609298] c1 90 4294902390 [10556.609298] 10 90 4294902390 [10556.609299] 7 80 4294902390 [10556.609300] 0 90 4294902390 [10556.609301] 8 81 4294902470 [10556.609302] 3 80 4294902476 [10556.609303] d1 90 4294902476 [10556.609304] a 90 4294902476 [10556.609305] 7 90 4294902476 [10556.609305] 0 90 4294902476 [10556.609306] 8 81 4294902577 [10556.609307] 3 80 4294902583 [10556.609308] c1 90 4294902583 [10556.609309] 10 90 4294902583 [10556.609310] 7 80 4294902583 [10556.609311] 0 90 4294902583 [10556.609311] 8 81 4294902663 [10556.609312] 7 80 4294902664 [10556.609313] 0 90 4294902664 [10556.609314] 8 81 4294902745 [10556.609315] last result at 4294902745 [10556.609315] last redo_fd_request at 4297335936 [10556.609317] 70 00 p. [10556.609322] status=0 [10556.609323] fdc_busy=1 [10556.609326] do_floppy=reset_interrupt [floppy] [10556.609327] cont=00000000ef40eb85 [10556.609328] current_req= (null) [10556.609329] command_status=-1 [10556.609332] floppy0: floppy timeout called [10556.610291] OOM killer enabled. [10556.610292] Restarting tasks ... [10556.610340] pci 0000:00:1e.0: PCI bridge to [bus 05] [10556.610343] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [10556.617672] done. [10556.619346] PM: suspend exit [10556.627296] pci 0000:00:1e.0: PCI bridge to [bus 05] [10556.627301] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [10556.627367] pci 0000:00:1e.0: PCI bridge to [bus 05] [10556.627369] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [10556.627419] pci 0000:00:1e.0: PCI bridge to [bus 05] [10556.627422] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [10556.627472] pci 0000:00:1e.0: PCI bridge to [bus 05] [10556.627475] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [10556.627518] pci 0000:00:1e.0: PCI bridge to [bus 05] [10556.627521] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [10556.721669] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10556.734706] r8169 0000:04:00.0 eth0: link down [10556.735373] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10559.059667] do_IRQ: 1.35 No irq handler for vector [10568.385171] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [10576.046217] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [10576.046228] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [10576.046867] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x00000000b1a82025, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [10576.046870] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [10576.083264] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10576.095457] r8169 0000:04:00.0 eth0: link down [10576.095558] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10579.053434] r8169 0000:04:00.0 eth0: link up [10579.053446] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [15377.042938] PM: suspend entry (deep) [15377.042940] PM: Syncing filesystems ... done. [15377.294520] Freezing user space processes ... (elapsed 0.002 seconds) done. [15377.296640] OOM killer disabled. [15377.296640] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [15377.297842] Suspending console(s) (use no_console_suspend to debug) [15377.311709] sd 2:0:0:0: [sda] Synchronizing SCSI cache [15377.331941] sd 2:0:0:0: [sda] Stopping disk [15377.884507] ACPI: Preparing to enter system sleep state S3 [15377.886605] PM: Saving platform NVS memory [15377.886632] Disabling non-boot CPUs ... [15377.900943] smpboot: CPU 1 is now offline [15377.903301] ACPI: Low-level resume complete [15377.903348] PM: Restoring platform NVS memory [15377.909437] Enabling non-boot CPUs ... [15377.909487] x86: Booting SMP configuration: [15377.909488] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15377.912302] cache: parent cpu1 should not be sleeping [15377.918458] CPU1 is up [15377.921181] ACPI: Waking up from system sleep state S3 [15377.962506] usb usb3: root hub lost power or was reset [15377.963235] usb usb6: root hub lost power or was reset [15377.963315] usb usb4: root hub lost power or was reset [15377.963362] sd 2:0:0:0: [sda] Starting disk [15377.963378] usb usb5: root hub lost power or was reset [15377.963417] usb usb8: root hub lost power or was reset [15377.963458] usb usb7: root hub lost power or was reset [15377.973690] rtc_cmos 00:01: Alarms can be up to one month in the future [15378.292158] ata9: SATA link down (SStatus 0 SControl 300) [15378.292187] ata10: SATA link down (SStatus 0 SControl 300) [15378.344139] ata8: SATA link down (SStatus 0 SControl 300) [15378.344152] ata6: SATA link down (SStatus 0 SControl 300) [15378.344164] ata7: SATA link down (SStatus 0 SControl 300) [15378.344193] ata4: SATA link down (SStatus 0 SControl 300) [15378.457992] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [15378.505977] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15378.505990] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [15378.506699] ata3.00: configured for UDMA/100 [15378.509736] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [15378.860724] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [15378.860726] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [15379.064698] ata1.00: configured for UDMA/33 [15381.141951] floppy driver state [15381.141952] ------------------- [15381.141960] now=4298737664 last interrupt=4294902745 diff=3834919 last called handler=recal_interrupt [floppy] [15381.141961] timeout_message=lock fdc [15381.141961] last output bytes: [15381.141962] c1 90 4294902390 [15381.141963] 10 90 4294902390 [15381.141964] 7 80 4294902390 [15381.141965] 0 90 4294902390 [15381.141966] 8 81 4294902470 [15381.141967] 3 80 4294902476 [15381.141968] d1 90 4294902476 [15381.141969] a 90 4294902476 [15381.141969] 7 90 4294902476 [15381.141970] 0 90 4294902476 [15381.141971] 8 81 4294902577 [15381.141972] 3 80 4294902583 [15381.141973] c1 90 4294902583 [15381.141974] 10 90 4294902583 [15381.141975] 7 80 4294902583 [15381.141975] 0 90 4294902583 [15381.141976] 8 81 4294902663 [15381.141977] 7 80 4294902664 [15381.141978] 0 90 4294902664 [15381.141979] 8 81 4294902745 [15381.141980] last result at 4294902745 [15381.141980] last redo_fd_request at 4297531520 [15381.141982] 70 00 p. [15381.141987] status=0 [15381.141988] fdc_busy=1 [15381.141991] do_floppy=reset_interrupt [floppy] [15381.141992] cont=00000000ef40eb85 [15381.141993] current_req= (null) [15381.141994] command_status=-1 [15381.141997] floppy0: floppy timeout called [15381.143011] OOM killer enabled. [15381.143012] Restarting tasks ... [15381.143059] pci 0000:00:1e.0: PCI bridge to [bus 05] [15381.143062] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15381.143192] pci 0000:00:1e.0: PCI bridge to [bus 05] [15381.143194] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15381.143240] pci 0000:00:1e.0: PCI bridge to [bus 05] [15381.143243] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15381.143288] pci 0000:00:1e.0: PCI bridge to [bus 05] [15381.143291] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15381.143338] pci 0000:00:1e.0: PCI bridge to [bus 05] [15381.143340] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15381.143381] pci 0000:00:1e.0: PCI bridge to [bus 05] [15381.143383] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15381.165474] done. [15381.165815] PM: suspend exit [15381.251392] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15381.263241] r8169 0000:04:00.0 eth0: link down [15381.263302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15383.567991] do_IRQ: 1.35 No irq handler for vector [15393.252360] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [15393.252375] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [15393.253023] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x00000000b1a82025, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [15393.253026] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [15393.291459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15393.304288] r8169 0000:04:00.0 eth0: link down [15393.304492] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15396.365643] r8169 0000:04:00.0 eth0: link up [15396.365655] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [15422.102699] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [15900.455775] PM: suspend entry (deep) [15900.455777] PM: Syncing filesystems ... done. [15900.691237] Freezing user space processes ... (elapsed 0.002 seconds) done. [15900.693372] OOM killer disabled. [15900.693372] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [15900.694583] Suspending console(s) (use no_console_suspend to debug) [15900.713743] sd 2:0:0:0: [sda] Synchronizing SCSI cache [15900.735840] sd 2:0:0:0: [sda] Stopping disk [15901.290512] ACPI: Preparing to enter system sleep state S3 [15901.293157] PM: Saving platform NVS memory [15901.293184] Disabling non-boot CPUs ... [15901.314954] smpboot: CPU 1 is now offline [15901.317313] ACPI: Low-level resume complete [15901.317360] PM: Restoring platform NVS memory [15901.323456] Enabling non-boot CPUs ... [15901.323516] x86: Booting SMP configuration: [15901.323517] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15901.326328] cache: parent cpu1 should not be sleeping [15901.332490] CPU1 is up [15901.335216] ACPI: Waking up from system sleep state S3 [15901.376505] usb usb7: root hub lost power or was reset [15901.376543] usb usb8: root hub lost power or was reset [15901.376615] usb usb5: root hub lost power or was reset [15901.376653] usb usb4: root hub lost power or was reset [15901.376751] usb usb3: root hub lost power or was reset [15901.376808] usb usb6: root hub lost power or was reset [15901.377247] sd 2:0:0:0: [sda] Starting disk [15901.387399] rtc_cmos 00:01: Alarms can be up to one month in the future [15901.706169] ata10: SATA link down (SStatus 0 SControl 300) [15901.706198] ata9: SATA link down (SStatus 0 SControl 300) [15901.762105] ata7: SATA link down (SStatus 0 SControl 300) [15901.762126] ata8: SATA link down (SStatus 0 SControl 300) [15901.762165] ata4: SATA link down (SStatus 0 SControl 300) [15901.762179] ata6: SATA link down (SStatus 0 SControl 300) [15901.872000] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [15901.923987] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15901.924001] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [15901.924709] ata3.00: configured for UDMA/100 [15901.927747] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [15902.274730] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [15902.274733] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [15902.277573] ata1.00: configured for UDMA/33 [15904.403964] floppy driver state [15904.403964] ------------------- [15904.403972] now=4298868480 last interrupt=4294902745 diff=3965735 last called handler=recal_interrupt [floppy] [15904.403973] timeout_message=lock fdc [15904.403974] last output bytes: [15904.403975] c1 90 4294902390 [15904.403976] 10 90 4294902390 [15904.403977] 7 80 4294902390 [15904.403978] 0 90 4294902390 [15904.403979] 8 81 4294902470 [15904.403979] 3 80 4294902476 [15904.403980] d1 90 4294902476 [15904.403981] a 90 4294902476 [15904.403982] 7 90 4294902476 [15904.403983] 0 90 4294902476 [15904.403984] 8 81 4294902577 [15904.403985] 3 80 4294902583 [15904.403986] c1 90 4294902583 [15904.403986] 10 90 4294902583 [15904.403987] 7 80 4294902583 [15904.403988] 0 90 4294902583 [15904.403989] 8 81 4294902663 [15904.403990] 7 80 4294902664 [15904.403991] 0 90 4294902664 [15904.403991] 8 81 4294902745 [15904.403992] last result at 4294902745 [15904.403993] last redo_fd_request at 4298737664 [15904.403994] 70 00 p. [15904.404000] status=0 [15904.404000] fdc_busy=1 [15904.404003] do_floppy=reset_interrupt [floppy] [15904.404004] cont=00000000ef40eb85 [15904.404005] current_req= (null) [15904.404006] command_status=-1 [15904.404009] floppy0: floppy timeout called [15904.404972] OOM killer enabled. [15904.404973] Restarting tasks ... [15904.405021] pci 0000:00:1e.0: PCI bridge to [bus 05] [15904.405024] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15904.410159] pci 0000:00:1e.0: PCI bridge to [bus 05] [15904.410163] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15904.410216] pci 0000:00:1e.0: PCI bridge to [bus 05] [15904.410218] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15904.410269] pci 0000:00:1e.0: PCI bridge to [bus 05] [15904.410271] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15904.410317] pci 0000:00:1e.0: PCI bridge to [bus 05] [15904.410319] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15904.410359] pci 0000:00:1e.0: PCI bridge to [bus 05] [15904.410361] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15904.426085] done. [15904.431974] PM: suspend exit [15904.529652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15904.541244] r8169 0000:04:00.0 eth0: link down [15904.541396] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15906.813814] do_IRQ: 1.35 No irq handler for vector [15913.619914] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [15916.971848] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [15916.972054] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [15916.972621] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x00000000b1a82025, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [15916.972623] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [15917.005554] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15917.017152] r8169 0000:04:00.0 eth0: link down [15917.017231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15919.990781] r8169 0000:04:00.0 eth0: link up [15919.990793] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [24040.887172] PM: suspend entry (deep) [24040.887175] PM: Syncing filesystems ... done. [24041.138401] Freezing user space processes ... (elapsed 0.001 seconds) done. [24041.140392] OOM killer disabled. [24041.140393] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [24041.141607] Suspending console(s) (use no_console_suspend to debug) [24041.160400] sd 2:0:0:0: [sda] Synchronizing SCSI cache [24041.174328] sd 2:0:0:0: [sda] Stopping disk [24041.725063] ACPI: Preparing to enter system sleep state S3 [24041.727703] PM: Saving platform NVS memory [24041.727732] Disabling non-boot CPUs ... [24041.741508] smpboot: CPU 1 is now offline [24041.743840] ACPI: Low-level resume complete [24041.743887] PM: Restoring platform NVS memory [24041.749982] Enabling non-boot CPUs ... [24041.750066] x86: Booting SMP configuration: [24041.750067] smpboot: Booting Node 0 Processor 1 APIC 0x1 [24041.752878] cache: parent cpu1 should not be sleeping [24041.759033] CPU1 is up [24041.761759] ACPI: Waking up from system sleep state S3 [24041.803029] usb usb3: root hub lost power or was reset [24041.803065] usb usb4: root hub lost power or was reset [24041.803105] usb usb5: root hub lost power or was reset [24041.803153] usb usb6: root hub lost power or was reset [24041.803192] usb usb7: root hub lost power or was reset [24041.803210] usb usb8: root hub lost power or was reset [24041.813391] rtc_cmos 00:01: Alarms can be up to one month in the future [24041.818089] sd 2:0:0:0: [sda] Starting disk [24042.132699] ata10: SATA link down (SStatus 0 SControl 300) [24042.132728] ata9: SATA link down (SStatus 0 SControl 300) [24042.192704] ata8: SATA link down (SStatus 0 SControl 300) [24042.192716] ata4: SATA link down (SStatus 0 SControl 300) [24042.192737] ata6: SATA link down (SStatus 0 SControl 300) [24042.192749] ata7: SATA link down (SStatus 0 SControl 300) [24042.310531] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [24042.354519] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [24042.354532] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [24042.355229] ata3.00: configured for UDMA/100 [24042.358280] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [24042.697258] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [24042.697260] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [24042.700096] ata1.00: configured for UDMA/33 [24044.838468] floppy driver state [24044.838468] ------------------- [24044.838476] now=4300903616 last interrupt=4294902745 diff=6000871 last called handler=recal_interrupt [floppy] [24044.838477] timeout_message=lock fdc [24044.838477] last output bytes: [24044.838479] c1 90 4294902390 [24044.838480] 10 90 4294902390 [24044.838480] 7 80 4294902390 [24044.838481] 0 90 4294902390 [24044.838482] 8 81 4294902470 [24044.838483] 3 80 4294902476 [24044.838484] d1 90 4294902476 [24044.838485] a 90 4294902476 [24044.838486] 7 90 4294902476 [24044.838486] 0 90 4294902476 [24044.838487] 8 81 4294902577 [24044.838488] 3 80 4294902583 [24044.838489] c1 90 4294902583 [24044.838490] 10 90 4294902583 [24044.838491] 7 80 4294902583 [24044.838491] 0 90 4294902583 [24044.838492] 8 81 4294902663 [24044.838493] 7 80 4294902664 [24044.838494] 0 90 4294902664 [24044.838495] 8 81 4294902745 [24044.838495] last result at 4294902745 [24044.838496] last redo_fd_request at 4298868480 [24044.838498] 70 00 p. [24044.838503] status=0 [24044.838504] fdc_busy=1 [24044.838507] do_floppy=reset_interrupt [floppy] [24044.838508] cont=00000000ef40eb85 [24044.838509] current_req= (null) [24044.838510] command_status=-1 [24044.838513] floppy0: floppy timeout called [24044.839575] OOM killer enabled. [24044.839576] Restarting tasks ... [24044.839624] pci 0000:00:1e.0: PCI bridge to [bus 05] [24044.839627] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [24044.851267] pci 0000:00:1e.0: PCI bridge to [bus 05] [24044.851271] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [24044.851321] pci 0000:00:1e.0: PCI bridge to [bus 05] [24044.851323] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [24044.851373] pci 0000:00:1e.0: PCI bridge to [bus 05] [24044.851375] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [24044.851422] pci 0000:00:1e.0: PCI bridge to [bus 05] [24044.851424] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [24044.851463] pci 0000:00:1e.0: PCI bridge to [bus 05] [24044.851466] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [24044.856115] done. [24044.856510] PM: suspend exit [24045.000497] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [24045.011936] r8169 0000:04:00.0 eth0: link down [24045.011994] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [24047.327978] do_IRQ: 1.35 No irq handler for vector [24056.086342] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [24056.086353] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [24056.086921] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x00000000b1a82025, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [24056.086923] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [24056.117018] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [24056.127553] r8169 0000:04:00.0 eth0: link down [24056.127626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [24059.106142] r8169 0000:04:00.0 eth0: link up [24059.106155] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [24085.030104] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [34435.239337] PM: suspend entry (deep) [34435.239339] PM: Syncing filesystems ... done. [34435.517830] Freezing user space processes ... (elapsed 0.002 seconds) done. [34435.519954] OOM killer disabled. [34435.519955] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [34435.521155] Suspending console(s) (use no_console_suspend to debug) [34435.540468] sd 2:0:0:0: [sda] Synchronizing SCSI cache [34435.551085] sd 2:0:0:0: [sda] Stopping disk [34436.105252] ACPI: Preparing to enter system sleep state S3 [34436.107892] PM: Saving platform NVS memory [34436.107919] Disabling non-boot CPUs ... [34436.121693] smpboot: CPU 1 is now offline [34436.124022] ACPI: Low-level resume complete [34436.124069] PM: Restoring platform NVS memory [34436.130151] Enabling non-boot CPUs ... [34436.130210] x86: Booting SMP configuration: [34436.130211] smpboot: Booting Node 0 Processor 1 APIC 0x1 [34436.133024] cache: parent cpu1 should not be sleeping [34436.139176] CPU1 is up [34436.141900] ACPI: Waking up from system sleep state S3 [34436.187218] usb usb3: root hub lost power or was reset [34436.187254] usb usb4: root hub lost power or was reset [34436.187287] usb usb5: root hub lost power or was reset [34436.187334] usb usb6: root hub lost power or was reset [34436.187373] usb usb7: root hub lost power or was reset [34436.187396] usb usb8: root hub lost power or was reset [34436.197571] rtc_cmos 00:01: Alarms can be up to one month in the future [34436.200950] sd 2:0:0:0: [sda] Starting disk [34436.512895] ata10: SATA link down (SStatus 0 SControl 300) [34436.512924] ata9: SATA link down (SStatus 0 SControl 300) [34436.572906] ata4: SATA link down (SStatus 0 SControl 300) [34436.572920] ata8: SATA link down (SStatus 0 SControl 300) [34436.572933] ata7: SATA link down (SStatus 0 SControl 300) [34436.572945] ata6: SATA link down (SStatus 0 SControl 300) [34436.682728] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [34436.734718] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [34436.734732] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [34436.735426] ata3.00: configured for UDMA/100 [34436.738414] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [34437.261322] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [34437.261324] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [34437.264155] ata1.00: configured for UDMA/33 [34439.374688] floppy driver state [34439.374688] ------------------- [34439.374697] now=4303502272 last interrupt=4294902745 diff=8599527 last called handler=recal_interrupt [floppy] [34439.374698] timeout_message=lock fdc [34439.374698] last output bytes: [34439.374699] c1 90 4294902390 [34439.374700] 10 90 4294902390 [34439.374701] 7 80 4294902390 [34439.374702] 0 90 4294902390 [34439.374703] 8 81 4294902470 [34439.374704] 3 80 4294902476 [34439.374705] d1 90 4294902476 [34439.374706] a 90 4294902476 [34439.374706] 7 90 4294902476 [34439.374707] 0 90 4294902476 [34439.374708] 8 81 4294902577 [34439.374709] 3 80 4294902583 [34439.374710] c1 90 4294902583 [34439.374711] 10 90 4294902583 [34439.374712] 7 80 4294902583 [34439.374712] 0 90 4294902583 [34439.374713] 8 81 4294902663 [34439.374714] 7 80 4294902664 [34439.374715] 0 90 4294902664 [34439.374716] 8 81 4294902745 [34439.374717] last result at 4294902745 [34439.374717] last redo_fd_request at 4300903616 [34439.374719] 70 00 p. [34439.374724] status=0 [34439.374725] fdc_busy=1 [34439.374728] do_floppy=reset_interrupt [floppy] [34439.374729] cont=00000000ef40eb85 [34439.374730] current_req= (null) [34439.374731] command_status=-1 [34439.374734] floppy0: floppy timeout called [34439.375698] OOM killer enabled. [34439.375698] Restarting tasks ... [34439.375745] pci 0000:00:1e.0: PCI bridge to [bus 05] [34439.375749] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [34439.382081] done. [34439.382133] PM: suspend exit [34439.385621] pci 0000:00:1e.0: PCI bridge to [bus 05] [34439.385625] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [34439.385680] pci 0000:00:1e.0: PCI bridge to [bus 05] [34439.385682] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [34439.385727] pci 0000:00:1e.0: PCI bridge to [bus 05] [34439.385730] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [34439.385774] pci 0000:00:1e.0: PCI bridge to [bus 05] [34439.385777] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [34439.385816] pci 0000:00:1e.0: PCI bridge to [bus 05] [34439.385819] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [34439.526120] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [34439.540010] r8169 0000:04:00.0 eth0: link down [34439.540562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [34441.794180] do_IRQ: 1.35 No irq handler for vector [34447.465133] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [34447.465145] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [34447.465718] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x00000000b1a82025, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [34447.465720] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [34447.503559] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [34447.515908] r8169 0000:04:00.0 eth0: link down [34447.515980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [34450.469863] r8169 0000:04:00.0 eth0: link up [34450.469875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [34468.298899] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [35614.286568] PM: suspend entry (deep) [35614.286572] PM: Syncing filesystems ... done. [35614.556192] Freezing user space processes ... (elapsed 0.002 seconds) done. [35614.558321] OOM killer disabled. [35614.558321] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35614.559530] Suspending console(s) (use no_console_suspend to debug) [35614.577702] sd 2:0:0:0: [sda] Synchronizing SCSI cache [35614.589564] sd 2:0:0:0: [sda] Stopping disk [35615.142444] ACPI: Preparing to enter system sleep state S3 [35615.145089] PM: Saving platform NVS memory [35615.145118] Disabling non-boot CPUs ... [35615.158886] smpboot: CPU 1 is now offline [35615.161227] ACPI: Low-level resume complete [35615.161274] PM: Restoring platform NVS memory [35615.167364] Enabling non-boot CPUs ... [35615.167414] x86: Booting SMP configuration: [35615.167415] smpboot: Booting Node 0 Processor 1 APIC 0x1 [35615.170228] cache: parent cpu1 should not be sleeping [35615.176385] CPU1 is up [35615.179110] ACPI: Waking up from system sleep state S3 [35615.220419] usb usb6: root hub lost power or was reset [35615.220456] usb usb7: root hub lost power or was reset [35615.220482] usb usb8: root hub lost power or was reset [35615.220523] usb usb5: root hub lost power or was reset [35615.220593] usb usb3: root hub lost power or was reset [35615.220643] usb usb4: root hub lost power or was reset [35615.224016] sd 2:0:0:0: [sda] Starting disk [35615.230807] rtc_cmos 00:01: Alarms can be up to one month in the future [35615.546095] ata9: SATA link down (SStatus 0 SControl 300) [35615.546125] ata10: SATA link down (SStatus 0 SControl 300) [35615.582078] ata7: SATA link down (SStatus 0 SControl 300) [35615.582099] ata6: SATA link down (SStatus 0 SControl 300) [35615.582112] ata4: SATA link down (SStatus 0 SControl 300) [35615.582124] ata8: SATA link down (SStatus 0 SControl 300) [35615.715920] usb 8-2: reset low-speed USB device number 2 using uhci_hcd [35615.743910] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [35615.743924] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [35615.744619] ata3.00: configured for UDMA/100 [35615.747680] ata5.00: configured for UDMA/66 (SET_XFERMODE skipped) [35616.114664] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [35616.114666] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [35616.316400] ata1.00: configured for UDMA/33 [35618.319877] floppy driver state [35618.319878] ------------------- [35618.319886] now=4303797120 last interrupt=4294902745 diff=8894375 last called handler=recal_interrupt [floppy] [35618.319886] timeout_message=lock fdc [35618.319887] last output bytes: [35618.319888] c1 90 4294902390 [35618.319889] 10 90 4294902390 [35618.319890] 7 80 4294902390 [35618.319891] 0 90 4294902390 [35618.319892] 8 81 4294902470 [35618.319893] 3 80 4294902476 [35618.319893] d1 90 4294902476 [35618.319894] a 90 4294902476 [35618.319895] 7 90 4294902476 [35618.319896] 0 90 4294902476 [35618.319897] 8 81 4294902577 [35618.319898] 3 80 4294902583 [35618.319899] c1 90 4294902583 [35618.319899] 10 90 4294902583 [35618.319900] 7 80 4294902583 [35618.319901] 0 90 4294902583 [35618.319902] 8 81 4294902663 [35618.319903] 7 80 4294902664 [35618.319904] 0 90 4294902664 [35618.319905] 8 81 4294902745 [35618.319905] last result at 4294902745 [35618.319906] last redo_fd_request at 4303502272 [35618.319907] 70 00 p. [35618.319913] status=0 [35618.319913] fdc_busy=1 [35618.319916] do_floppy=reset_interrupt [floppy] [35618.319918] cont=00000000ef40eb85 [35618.319919] current_req= (null) [35618.319920] command_status=-1 [35618.319923] floppy0: floppy timeout called [35618.320887] OOM killer enabled. [35618.320888] Restarting tasks ... [35618.320936] pci 0000:00:1e.0: PCI bridge to [bus 05] [35618.320939] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [35618.331952] done. [35618.340025] pci 0000:00:1e.0: PCI bridge to [bus 05] [35618.340029] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [35618.340118] pci 0000:00:1e.0: PCI bridge to [bus 05] [35618.340143] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [35618.340198] pci 0000:00:1e.0: PCI bridge to [bus 05] [35618.340200] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [35618.340245] pci 0000:00:1e.0: PCI bridge to [bus 05] [35618.340248] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [35618.340288] pci 0000:00:1e.0: PCI bridge to [bus 05] [35618.340291] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [35618.343153] PM: suspend exit [35618.452199] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [35618.465159] r8169 0000:04:00.0 eth0: link down [35618.465260] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [35620.727344] do_IRQ: 1.35 No irq handler for vector [35631.173124] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [35631.173135] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [35631.173615] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x00000000b1a82025, 00:1a:4d:5d:93:fe, XID 18000000 IRQ 25 [35631.173617] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [35631.207337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [35631.221146] r8169 0000:04:00.0 eth0: link down [35631.221232] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [35634.209997] r8169 0000:04:00.0 eth0: link up [35634.210009] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [35635.215708] Corrupted low memory at 000000006f38b174 (e2d8 phys) = 400000000000 [35865.678507] r8169 0000:04:00.0: invalid short VPD tag 05 at offset 2