[ 0.000000] Linux version 4.15.0-22-generic (buildd@lgw01-amd64-013) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 (Ubuntu 4.15.0-22.24-generic 4.15.17) [ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-22-generic root=UUID=287736d3-3b35-4262-a175-3254aa366f41 ro rootflags=subvol=@ quiet splash i915.enable_rc6=1 i915.enable_psr=2 i915.enable_guc_loading=1 i915.enable_guc_submission=1 i915.semaphores=1 i915.disable_power_well=0 vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f7d4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f7d5000-0x000000005f7d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005f7d6000-0x000000005f7d6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005f7d7000-0x0000000070804fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070805000-0x0000000070bc1fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000070bc2000-0x0000000070c05fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000070c06000-0x000000007aef3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007aef4000-0x000000007b51ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b520000-0x000000007b5fefff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007b5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b600000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x70bcf000 ACPI 2.0=0x70bcf000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x7b29f118 MEMATTR=0x6e09f018 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. XPS 13 9360/02PG84, BIOS 2.6.2 02/26/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x47e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x7b600 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x000000007b29f118 to 0x000000007b29f150. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x28713e000, 0x28713efff] PGTABLE [ 0.000000] BRK [0x28713f000, 0x28713ffff] PGTABLE [ 0.000000] BRK [0x287140000, 0x287140fff] PGTABLE [ 0.000000] BRK [0x287141000, 0x287141fff] PGTABLE [ 0.000000] BRK [0x287142000, 0x287142fff] PGTABLE [ 0.000000] BRK [0x287143000, 0x287143fff] PGTABLE [ 0.000000] BRK [0x287144000, 0x287144fff] PGTABLE [ 0.000000] BRK [0x287145000, 0x287145fff] PGTABLE [ 0.000000] BRK [0x287146000, 0x287146fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3181b000-0x34c04fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000070BCF000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x0000000070BCF0C8 000114 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x0000000070BF4A70 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x0000000070BCF270 0257FA (v02 DELL CBX3 01072009 INTL 20160422) [ 0.000000] ACPI: FACS 0x000000007AEF1180 000040 [ 0.000000] ACPI: APIC 0x0000000070BF4B80 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x0000000070BF4C40 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x0000000070BF4C88 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x0000000070BF4D38 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x0000000070BF4D78 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x0000000070BF4DB0 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.000000] ACPI: BOOT 0x0000000070BF5110 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x0000000070BF5138 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: HPET 0x0000000070BF6408 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x0000000070BF6440 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422) [ 0.000000] ACPI: UEFI 0x0000000070BF71C8 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x0000000070BF7210 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: LPIT 0x0000000070BF80F0 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: WSMT 0x0000000070BF8188 000028 (v01 DELL CBX3 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x0000000070BF81B0 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000070BF8318 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000070BF85B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000070BFB5C0 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.000000] ACPI: DBGP 0x0000000070BFB6A0 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x0000000070BFB6D8 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x0000000070BFB730 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000070BFBF10 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.000000] ACPI: MSDM 0x0000000070C04408 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SLIC 0x0000000070C04460 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: NHLT 0x0000000070C045D8 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: TPM2 0x0000000070C04608 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: ASF! 0x0000000070C04640 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: DMAR 0x0000000070C046E0 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x0000000070C047D0 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x47e7d5000-0x47e7fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000047e7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000005f7d4fff] [ 0.000000] node 0: [mem 0x000000005f7d7000-0x0000000070804fff] [ 0.000000] node 0: [mem 0x000000007b5ff000-0x000000007b5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047e7fffff] [ 0.000000] On node 0 totalpages: 4124576 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7137 pages used for memmap [ 0.000000] DMA32 zone: 456708 pages, LIFO batch:31 [ 0.000000] Normal zone: 57248 pages used for memmap [ 0.000000] Normal zone: 3663872 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x5f7d5000-0x5f7d5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5f7d6000-0x5f7d6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x70805000-0x70bc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x70bc2000-0x70c05fff] [ 0.000000] PM: Registered nosave memory: [mem 0x70c06000-0x7aef3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7aef4000-0x7b51ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b520000-0x7b5fefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b600000-0x7f7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4060105 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.15.0-22-generic root=UUID=287736d3-3b35-4262-a175-3254aa366f41 ro rootflags=subvol=@ quiet splash i915.enable_rc6=1 i915.enable_psr=2 i915.enable_guc_loading=1 i915.enable_guc_submission=1 i915.semaphores=1 i915.disable_power_well=0 vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16043152K/16498304K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 455152K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39081 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 39 [ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.004000] DMAR: RMRR base: 0x000000708dd000 end: 0x000000708fcfff [ 0.004000] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff [ 0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.004000] x2apic enabled [ 0.004000] Switched APIC routing to cluster x2apic. [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 2000.000 MHz processor [ 0.028000] tsc: Detected 1992.000 MHz TSC [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=7968000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032520] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.032562] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.032603] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.032778] CPU: Physical Processor ID: 0 [ 0.032778] CPU: Processor Core ID: 0 [ 0.032782] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.032783] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.032787] mce: CPU supports 10 MCE banks [ 0.032795] CPU0: Thermal monitoring enabled (TM1) [ 0.032809] process: using mwait in idle threads [ 0.032811] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.032811] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.032813] Spectre V2 : Mitigation: Full generic retpoline [ 0.032813] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.032813] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.032814] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.032814] Speculative Store Bypass: Vulnerable [ 0.032932] Freeing SMP alternatives memory: 36K [ 0.036782] TSC deadline timer enabled [ 0.036787] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.036848] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.036869] ... version: 4 [ 0.036869] ... bit width: 48 [ 0.036869] ... generic registers: 4 [ 0.036870] ... value mask: 0000ffffffffffff [ 0.036870] ... max period: 00007fffffffffff [ 0.036871] ... fixed-purpose events: 3 [ 0.036871] ... event mask: 000000070000000f [ 0.036898] Hierarchical SRCU implementation. [ 0.037792] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.037802] smp: Bringing up secondary CPUs ... [ 0.037846] x86: Booting SMP configuration: [ 0.037847] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.040432] smp: Brought up 1 node, 8 CPUs [ 0.040432] smpboot: Max logical packages: 1 [ 0.040432] smpboot: Total of 8 processors activated (31872.00 BogoMIPS) [ 0.044470] devtmpfs: initialized [ 0.044470] x86/mm: Memory block size: 128MB [ 0.044827] evm: security.selinux [ 0.044827] evm: security.SMACK64 [ 0.044828] evm: security.SMACK64EXEC [ 0.044828] evm: security.SMACK64TRANSMUTE [ 0.044828] evm: security.SMACK64MMAP [ 0.044829] evm: security.apparmor [ 0.044829] evm: security.ima [ 0.044829] evm: security.capability [ 0.044839] PM: Registering ACPI NVS region [mem 0x5f7d5000-0x5f7d5fff] (4096 bytes) [ 0.044839] PM: Registering ACPI NVS region [mem 0x70c06000-0x7aef3fff] (170844160 bytes) [ 0.045493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.045493] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.045493] pinctrl core: initialized pinctrl subsystem [ 0.045493] RTC time: 17:31:17, date: 06/04/18 [ 0.045493] NET: Registered protocol family 16 [ 0.045493] audit: initializing netlink subsys (disabled) [ 0.045493] audit: type=2000 audit(1528133477.044:1): state=initialized audit_enabled=0 res=1 [ 0.045493] cpuidle: using governor ladder [ 0.045493] cpuidle: using governor menu [ 0.045493] Simple Boot Flag at 0x47 set to 0x80 [ 0.045493] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.045493] ACPI: bus type PCI registered [ 0.045493] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.045493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.045493] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.045493] PCI: Using configuration type 1 for base access [ 0.048464] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.048464] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.048465] ACPI: Added _OSI(Module Device) [ 0.048465] ACPI: Added _OSI(Processor Device) [ 0.048465] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.048465] ACPI: Added _OSI(Processor Aggregator Device) [ 0.048978] ACPI: Executed 34 blocks of module-level executable AML code [ 0.064635] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.068207] ACPI: Dynamic OEM Table Load: [ 0.068212] ACPI: SSDT 0xFFFF97D02B54C800 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.068416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.068470] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.068883] ACPI: Dynamic OEM Table Load: [ 0.068887] ACPI: SSDT 0xFFFF97D02B320400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.069075] ACPI: Executed 1 blocks of module-level executable AML code [ 0.069150] ACPI: Dynamic OEM Table Load: [ 0.069150] ACPI: SSDT 0xFFFF97D02B606000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.069150] ACPI: Executed 1 blocks of module-level executable AML code [ 0.072174] ACPI: Dynamic OEM Table Load: [ 0.072178] ACPI: SSDT 0xFFFF97D02B242A00 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.072370] ACPI: Executed 1 blocks of module-level executable AML code [ 0.074361] ACPI: EC: EC started [ 0.074362] ACPI: EC: interrupt blocked [ 0.080096] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.080097] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.080098] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions [ 0.080099] ACPI: Interpreter enabled [ 0.080133] ACPI: (supports S0 S3 S4 S5) [ 0.080134] ACPI: Using IOAPIC for interrupt routing [ 0.080165] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.080698] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.084481] ACPI: Power Resource [WRST] (on) [ 0.084787] ACPI: Power Resource [WRST] (on) [ 0.085091] ACPI: Power Resource [WRST] (on) [ 0.085393] ACPI: Power Resource [WRST] (on) [ 0.085696] ACPI: Power Resource [WRST] (on) [ 0.085999] ACPI: Power Resource [WRST] (on) [ 0.086475] ACPI: Power Resource [WRST] (on) [ 0.086781] ACPI: Power Resource [WRST] (on) [ 0.087084] ACPI: Power Resource [WRST] (on) [ 0.087529] ACPI: Power Resource [WRST] (on) [ 0.088057] ACPI: Power Resource [WRST] (on) [ 0.088361] ACPI: Power Resource [WRST] (on) [ 0.088660] ACPI: Power Resource [WRST] (on) [ 0.088961] ACPI: Power Resource [WRST] (on) [ 0.089262] ACPI: Power Resource [WRST] (on) [ 0.089569] ACPI: Power Resource [WRST] (on) [ 0.089871] ACPI: Power Resource [WRST] (on) [ 0.091037] ACPI: Power Resource [WRST] (on) [ 0.091339] ACPI: Power Resource [WRST] (on) [ 0.091641] ACPI: Power Resource [WRST] (on) [ 0.110080] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.110085] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.110412] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.110723] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.110724] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.111337] PCI host bridge to bus 0000:00 [ 0.111338] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.111339] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.111340] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.111341] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.111342] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.111343] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.111344] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.111344] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.111345] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.111346] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.111347] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.111348] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window] [ 0.111348] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.111350] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.111357] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.111467] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.111476] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit] [ 0.111481] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.111485] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.111496] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.111605] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.111617] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit] [ 0.111801] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.111823] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit] [ 0.111884] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.112056] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.112077] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit] [ 0.112312] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.112402] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit] [ 0.112890] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.113092] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit] [ 0.113516] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.113533] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit] [ 0.113599] pci 0000:00:16.0: PME# supported from D3hot [ 0.113758] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.113828] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.113985] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.114058] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.114204] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.114279] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.114428] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.114493] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.114669] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.114881] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.114894] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff] [ 0.115040] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 0.115064] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit] [ 0.115089] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit] [ 0.115133] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.115318] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.115379] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit] [ 0.115450] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.115705] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.115710] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.115714] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.116006] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 [ 0.116328] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit] [ 0.117401] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.128317] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.128323] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.128759] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.128796] pci 0000:3b:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff] [ 0.128916] pci 0000:3b:00.0: supports D1 D2 [ 0.128918] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.140466] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.140472] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.140625] pci 0000:3c:00.0: [1179:0116] type 00 class 0x010802 [ 0.140661] pci 0000:3c:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit] [ 0.152071] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.152077] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.156482] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.156577] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.156668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.156759] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.156850] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.156940] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.157031] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.157121] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.157269] ACPI: \_SB_.PEPD: Low Power S0 Idle interface disabled [ 0.163269] ACPI: EC: interrupt unblocked [ 0.163283] ACPI: EC: event unblocked [ 0.163312] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.163314] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events [ 0.163826] SCSI subsystem initialized [ 0.164527] libata version 3.00 loaded. [ 0.164547] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.164547] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.164547] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.164547] vgaarb: loaded [ 0.164547] ACPI: bus type USB registered [ 0.164547] usbcore: registered new interface driver usbfs [ 0.164547] usbcore: registered new interface driver hub [ 0.164547] usbcore: registered new device driver usb [ 0.164547] EDAC MC: Ver: 3.0.0 [ 0.164593] Registered efivars operations [ 0.172024] PCI: Using ACPI for IRQ routing [ 0.199843] PCI: pci_cache_line_size set to 64 bytes [ 0.200749] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.200750] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.200751] e820: reserve RAM buffer [mem 0x5f7d5000-0x5fffffff] [ 0.200751] e820: reserve RAM buffer [mem 0x70805000-0x73ffffff] [ 0.200752] e820: reserve RAM buffer [mem 0x7b600000-0x7bffffff] [ 0.200753] e820: reserve RAM buffer [mem 0x47e800000-0x47fffffff] [ 0.200820] NetLabel: Initializing [ 0.200820] NetLabel: domain hash size = 128 [ 0.200820] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.200831] NetLabel: unlabeled traffic allowed by default [ 0.200842] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.200842] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.204017] clocksource: Switched to clocksource hpet [ 0.211821] VFS: Disk quotas dquot_6.6.0 [ 0.211831] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.211904] AppArmor: AppArmor Filesystem Enabled [ 0.211918] pnp: PnP ACPI init [ 0.212132] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.212133] system 00:00: [io 0xffff] has been reserved [ 0.212134] system 00:00: [io 0xffff] has been reserved [ 0.212135] system 00:00: [io 0xffff] has been reserved [ 0.212136] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.212137] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.212140] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212220] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.212247] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.212249] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.212374] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.212386] pnp 00:04: Plug and Play ACPI device, IDs DLL082a PNP0f13 (active) [ 0.212578] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.212579] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.212580] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.212581] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.212582] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.212583] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.212584] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.212585] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.212586] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.212587] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.212589] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212619] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.212620] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.212621] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.212622] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.212623] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.212624] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.212625] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.212627] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.212867] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.212870] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.213823] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.213824] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.213827] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.217126] pnp: PnP ACPI: found 9 devices [ 0.224317] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.224327] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 0.224347] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.224348] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.224350] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.224353] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.224356] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.224360] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.224365] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.224370] pci 0000:00:1c.5: PCI bridge to [bus 3b] [ 0.224374] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.224379] pci 0000:00:1d.0: PCI bridge to [bus 3c] [ 0.224382] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.224388] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.224389] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.224390] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.224390] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.224391] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.224392] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.224393] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.224394] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.224395] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.224395] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.224396] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.224397] pci_bus 0000:00: resource 15 [mem 0x7f800000-0xdfffffff window] [ 0.224398] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window] [ 0.224399] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.224400] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.224401] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.224402] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff] [ 0.224402] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff] [ 0.224403] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff] [ 0.224527] NET: Registered protocol family 2 [ 0.224679] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.224830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.224971] TCP: Hash tables configured (established 131072 bind 65536) [ 0.225000] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.225042] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.225120] NET: Registered protocol family 1 [ 0.225128] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.225771] PCI: CLS 0 bytes, default 64 [ 0.225797] Unpacking initramfs... [ 0.770186] Freeing initrd memory: 53160K [ 0.770238] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0 [ 0.770241] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1 [ 0.770256] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.770258] software IO TLB [mem 0x69e63000-0x6de63000] (64MB) mapped at [00000000606affc0-000000004441580f] [ 0.770580] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns [ 0.770834] Scanning for low memory corruption every 60 seconds [ 0.771414] Initialise system trusted keyrings [ 0.771422] Key type blacklist registered [ 0.771486] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.772191] zbud: loaded [ 0.772528] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.772683] fuse init (API version 7.26) [ 0.775014] Key type asymmetric registered [ 0.775015] Asymmetric key parser 'x509' registered [ 0.775031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.775084] io scheduler noop registered [ 0.775084] io scheduler deadline registered [ 0.775108] io scheduler cfq registered (default) [ 0.776152] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 0.776175] pcieport 0000:00:1c.4: AER enabled with IRQ 123 [ 0.776198] pcieport 0000:00:1c.5: AER enabled with IRQ 124 [ 0.776216] pcieport 0000:00:1d.0: AER enabled with IRQ 125 [ 0.776271] efifb: probing for efifb [ 0.776279] efifb: framebuffer at 0x90000000, using 8128k, total 8128k [ 0.776280] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.776280] efifb: scrolling: redraw [ 0.776281] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.776363] Console: switching to colour frame buffer device 240x67 [ 0.776378] fb0: EFI VGA frame buffer device [ 0.776383] intel_idle: MWAIT substates: 0x11142120 [ 0.776384] intel_idle: v0.4.1 model 0x8E [ 0.776834] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.778827] ACPI: AC Adapter [AC] (off-line) [ 0.778886] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.778944] ACPI: Lid Switch [LID0] [ 0.778962] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.779013] ACPI: Power Button [PBTN] [ 0.779029] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.779045] ACPI: Sleep Button [SBTN] [ 0.779063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.779114] ACPI: Power Button [PWRF] [ 0.780615] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.781168] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.781168] ACPI: Thermal Zone [THM] (25 C) [ 0.781321] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.785255] Linux agpgart interface v0.103 [ 0.796237] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4) [ 0.805242] ACPI: Battery Slot [BAT0] (battery present) [ 0.862395] loop: module loaded [ 0.862585] libphy: Fixed MDIO Bus: probed [ 0.862586] tun: Universal TUN/TAP device driver, 1.6 [ 0.862707] PPP generic driver version 2.4.2 [ 0.862826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.862829] ehci-pci: EHCI PCI platform driver [ 0.862839] ehci-platform: EHCI generic platform driver [ 0.862850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.862852] ohci-pci: OHCI PCI platform driver [ 0.862862] ohci-platform: OHCI generic platform driver [ 0.862870] uhci_hcd: USB Universal Host Controller Interface driver [ 0.863104] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.863110] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.864240] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 0.864246] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.864424] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.864426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.864427] usb usb1: Product: xHCI Host Controller [ 0.864429] usb usb1: Manufacturer: Linux 4.15.0-22-generic xhci-hcd [ 0.864431] usb usb1: SerialNumber: 0000:00:14.0 [ 0.864633] hub 1-0:1.0: USB hub found [ 0.864661] hub 1-0:1.0: 12 ports detected [ 0.866411] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.866417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.866465] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.866467] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.866468] usb usb2: Product: xHCI Host Controller [ 0.866470] usb usb2: Manufacturer: Linux 4.15.0-22-generic xhci-hcd [ 0.866472] usb usb2: SerialNumber: 0000:00:14.0 [ 0.866665] hub 2-0:1.0: USB hub found [ 0.866682] hub 2-0:1.0: 6 ports detected [ 0.866942] usb: port power management may be unreliable [ 0.867269] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.867866] i8042: Warning: Keylock active [ 0.870058] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.870060] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.870297] mousedev: PS/2 mouse device common for all mice [ 0.870985] rtc_cmos 00:01: RTC can wake from S4 [ 0.871617] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.871725] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.871729] i2c /dev entries driver [ 0.871754] device-mapper: uevent: version 1.0.3 [ 0.871862] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.871865] intel_pstate: Intel P-state driver initializing [ 0.872660] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.875610] intel_pstate: HWP enabled [ 0.876200] ledtrig-cpu: registered to indicate activity on CPUs [ 0.876201] EFI Variables Facility v0.08 2004-May-17 [ 0.887056] intel_pmc_core: initialized [ 0.887222] NET: Registered protocol family 10 [ 0.891822] Segment Routing with IPv6 [ 0.891833] NET: Registered protocol family 17 [ 0.891951] Key type dns_resolver registered [ 0.893102] RAS: Correctable Errors collector initialized. [ 0.893173] microcode: sig=0x806ea, pf=0x80, revision=0x84 [ 0.893628] microcode: Microcode Update Driver: v2.2. [ 0.893634] sched_clock: Marking stable (893616737, 0)->(870780063, 22836674) [ 0.894063] registered taskstats version 1 [ 0.894070] Loading compiled-in X.509 certificates [ 0.895657] Loaded X.509 cert 'Build time autogenerated kernel key: 2bae1e8c50dcab357f42f039715f6a76c2f9c3dc' [ 0.895909] Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring [ 0.895924] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 0.895937] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 0.897372] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 0.897694] zswap: loaded using pool lzo/zbud [ 0.900939] Key type big_key registered [ 0.900941] Key type trusted registered [ 0.902168] Key type encrypted registered [ 0.902170] AppArmor: AppArmor sha1 policy hashing enabled [ 1.016117] evm: HMAC attrs: 0x1 [ 1.017829] Magic number: 6:580:541 [ 1.018107] rtc_cmos 00:01: setting system clock to 2018-06-04 17:31:18 UTC (1528133478) [ 1.018292] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.018292] EDD information not available. [ 1.019833] Freeing unused kernel memory: 2404K [ 1.019833] Write protecting the kernel read-only data: 20480k [ 1.020325] Freeing unused kernel memory: 2008K [ 1.022556] Freeing unused kernel memory: 1904K [ 1.026196] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.026196] x86/mm: Checking user space page tables [ 1.029754] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.092671] hidraw: raw HID events driver (C) Jiri Kosina [ 1.093384] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found [ 1.096584] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002) [ 1.099607] nvme nvme0: pci function 0000:3c:00.0 [ 1.177092] Setting dangerous option enable_rc6 - tainting kernel [ 1.177094] Setting dangerous option enable_psr - tainting kernel [ 1.177094] Setting dangerous option enable_guc_loading - tainting kernel [ 1.177095] Setting dangerous option enable_guc_submission - tainting kernel [ 1.177096] Setting dangerous option semaphores - tainting kernel [ 1.177097] Setting dangerous option disable_power_well - tainting kernel [ 1.179982] [drm] Memory usable by graphics device = 4078M [ 1.179984] checking generic (90000000 7f0000) vs hw (90000000 10000000) [ 1.179984] fb: switching to inteldrmfb from EFI VGA [ 1.179997] Console: switching to colour dummy device 80x25 [ 1.180076] [drm] Replacing VGA console driver [ 1.186193] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.186193] [drm] Driver supports precise vblank timestamp query. [ 1.188152] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.188646] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [ 1.200024] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [ 1.204139] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.210573] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [ 1.226003] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [ 1.226610] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 1.323286] nvme0n1: p1 p2 p3 [ 1.354551] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300 [ 1.354553] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.480359] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 1.646352] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.647248] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.650019] fbcon: inteldrmfb (fb0) is primary device [ 1.650050] Console: switching to colour frame buffer device 240x67 [ 1.650065] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.689334] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c [ 1.689335] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.689336] usb 1-5: Product: Integrated_Webcam_HD [ 1.689337] usb 1-5: Manufacturer: CN09GTFMLOG0081AB3BFA01 [ 1.752048] raid6: sse2x1 gen() 13382 MB/s [ 1.800024] raid6: sse2x1 xor() 9184 MB/s [ 1.848026] raid6: sse2x2 gen() 12763 MB/s [ 1.896026] raid6: sse2x2 xor() 7425 MB/s [ 1.944027] raid6: sse2x4 gen() 11551 MB/s [ 1.992023] raid6: sse2x4 xor() 7671 MB/s [ 2.040025] raid6: avx2x1 gen() 18918 MB/s [ 2.088026] raid6: avx2x1 xor() 11574 MB/s [ 2.136024] raid6: avx2x2 gen() 25226 MB/s [ 2.184024] raid6: avx2x2 xor() 14908 MB/s [ 2.232025] raid6: avx2x4 gen() 25393 MB/s [ 2.280024] raid6: avx2x4 xor() 15877 MB/s [ 2.280025] raid6: using algorithm avx2x4 gen() 25393 MB/s [ 2.280025] raid6: .... xor() 15877 MB/s, rmw enabled [ 2.280026] raid6: using avx2x2 recovery algorithm [ 2.280041] clocksource: Switched to clocksource tsc [ 2.282232] xor: automatically using best checksumming function avx [ 2.292911] Btrfs loaded, crc32c=crc32c-intel [ 2.314247] BTRFS: device fsid 287736d3-3b35-4262-a175-3254aa366f41 devid 1 transid 235810 /dev/nvme0n1p2 [ 2.330386] BTRFS info (device nvme0n1p2): disk space caching is enabled [ 2.330387] BTRFS info (device nvme0n1p2): has skinny extents [ 2.358485] BTRFS info (device nvme0n1p2): enabling ssd optimizations [ 2.396950] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734] [ 2.425685] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..] [ 2.425688] psmouse serio1: synaptics: Your touchpad (PNP: DLL082a PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.482791] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007 [ 2.491003] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.513206] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.521272] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.532698] systemd[1]: Detected architecture x86-64. [ 2.535055] systemd[1]: Set hostname to . [ 2.608659] systemd[1]: Reached target Remote File Systems. [ 2.609630] systemd[1]: Created slice System Slice. [ 2.609677] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.609744] systemd[1]: Listening on Journal Audit Socket. [ 2.609775] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.609799] systemd[1]: Listening on udev Kernel Socket. [ 2.609847] systemd[1]: Listening on Journal Socket. [ 2.622465] BTRFS info (device nvme0n1p2): disk space caching is enabled [ 2.625880] lp: driver loaded but no devices found [ 2.628127] ppdev: user-space parallel port driver [ 2.655300] systemd-journald[341]: Received request to flush runtime journal from PID 1 [ 2.748419] [drm] RC6 on [ 2.809541] input: Intel HID events as /devices/platform/INT33D5:00/input/input8 [ 2.821573] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input9 [ 2.849378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.851950] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 2.857880] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.869999] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.870260] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.870648] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.870653] cfg80211: failed to load regulatory.db [ 2.883294] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10 [ 2.890091] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 2.890390] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.891891] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 2.891892] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.891893] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.891894] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.891894] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.891895] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 2.913653] AVX2 version of gcm_enc/dec engaged. [ 2.913654] AES CTR mode by8 optimization enabled [ 2.916235] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002) [ 2.917890] i2c_hid i2c-DLL082A:01: i2c-DLL082A:01 supply vdd not found, using dummy regulator [ 2.918602] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 2.967333] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.967376] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 2.982655] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 2.987710] intel_rapl: Found RAPL domain package [ 2.987713] intel_rapl: Found RAPL domain core [ 2.987713] intel_rapl: Found RAPL domain uncore [ 2.987714] intel_rapl: Found RAPL domain dram [ 2.988674] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.017854] Adding 1952764k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:1952764k SSFS [ 3.037480] random: crng init done [ 3.039396] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 3.190533] input: DLL082A:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL082A:01/0018:06CB:76AF.0001/input/input12 [ 3.194110] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL082A:01 06CB:76AF] on i2c-DLL082A:01 [ 3.198010] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2 [ 3.198022] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/cal-pci-0000:3a:00.0.bin failed with error -2 [ 3.201545] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [ 3.201548] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 3.201950] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb [ 3.267013] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 20d869c3 [ 3.848526] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [ 3.851040] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [ 3.852054] ath10k_pci 0000:3a:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 3.927425] Bluetooth: Core ver 2.22 [ 3.927439] NET: Registered protocol family 31 [ 3.927440] Bluetooth: HCI device and connection manager initialized [ 3.927442] Bluetooth: HCI socket layer initialized [ 3.927444] Bluetooth: L2CAP socket layer initialized [ 3.927448] Bluetooth: SCO socket layer initialized [ 3.928983] media: Linux media interface: v0.10 [ 3.933749] usbcore: registered new interface driver btusb [ 3.934167] Linux video capture interface: v2.00 [ 3.938404] ath: EEPROM regdomain: 0x6c [ 3.938405] ath: EEPROM indicates we should expect a direct regpair map [ 3.938405] ath: Country alpha2 being used: 00 [ 3.938406] ath: Regpair used: 0x6c [ 3.942091] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 3.997382] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.050323] audit: type=1400 audit(1528133481.530:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1120 comm="apparmor_parser" [ 4.050693] audit: type=1400 audit(1528133481.530:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1122 comm="apparmor_parser" [ 4.051161] audit: type=1400 audit(1528133481.530:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1121 comm="apparmor_parser" [ 4.051164] audit: type=1400 audit(1528133481.530:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1121 comm="apparmor_parser" [ 4.051165] audit: type=1400 audit(1528133481.530:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1121 comm="apparmor_parser" [ 4.051198] audit: type=1400 audit(1528133481.530:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4650/usr/lib/snapd/snap-confine" pid=1117 comm="apparmor_parser" [ 4.051200] audit: type=1400 audit(1528133481.530:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4650/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1117 comm="apparmor_parser" [ 4.051502] audit: type=1400 audit(1528133481.530:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1123 comm="apparmor_parser" [ 4.051504] audit: type=1400 audit(1528133481.530:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=1123 comm="apparmor_parser" [ 4.060595] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.060597] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.060599] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.060599] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.060600] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.060602] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 4.060603] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 4.060604] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.091196] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 4.123187] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.123255] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.123312] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 4.123373] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 4.123441] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 4.123500] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 4.132892] new mount options do not match the existing superblock, will be ignored [ 4.142158] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 4.142160] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! [ 4.142161] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 4.142163] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 4.142208] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23 [ 4.142253] usbcore: registered new interface driver uvcvideo [ 4.142254] USB Video Class driver (1.1.1) [ 4.171010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.171011] Bluetooth: BNEP filters: protocol multicast [ 4.171015] Bluetooth: BNEP socket layer initialized [ 4.551033] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5.281240] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [ 5.284323] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [ 5.340184] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 5.427710] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 7.352829] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload2-346) [ 7.352837] No Local Variables are initialized for Method [XTBT] [ 7.352838] Initialized Arguments for Method [XTBT]: (2 arguments defined for method invocation) [ 7.352838] Arg0: 00000000b5043bd5 Integer 0000000000000001 [ 7.352842] Arg1: 000000007841b861 Integer 0000000002060002 [ 7.352844] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252) [ 7.352846] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [ 7.352850] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [ 7.352854] ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170831/psparse-550) [ 7.352858] ACPI: Marking method _E42 as Serialized because of AE_ALREADY_EXISTS error [ 7.352860] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170831/evgpe-646) [ 9.276309] wlp58s0: authenticate with 50:64:2b:1a:bc:22 [ 9.310060] wlp58s0: send auth to 50:64:2b:1a:bc:22 (try 1/3) [ 9.311635] wlp58s0: authenticated [ 9.312016] wlp58s0: associate with 50:64:2b:1a:bc:22 (try 1/3) [ 9.313562] wlp58s0: RX AssocResp from 50:64:2b:1a:bc:22 (capab=0x111 status=0 aid=3) [ 9.316238] wlp58s0: associated [ 9.325398] ath: EEPROM regdomain: 0x80fa [ 9.325399] ath: EEPROM indicates we should expect a country code [ 9.325400] ath: doing EEPROM country->regdmn map search [ 9.325400] ath: country maps to regdmn code: 0x37 [ 9.325401] ath: Country alpha2 being used: FR [ 9.325402] ath: Regpair used: 0x37 [ 9.325402] ath: regdomain 0x80fa dynamically updated by country IE [ 9.325981] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 9.393200] wlp58s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 50:64:2b:1a:bc:22 [ 9.852232] kauditd_printk_skb: 77 callbacks suppressed [ 9.852233] audit: type=1400 audit(1528133487.334:88): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1842 comm="snap-confine" capability=2 capname="dac_read_search" [ 11.904405] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 [ 11.904471] pci 0000:01:00.0: enabling Extended Tags [ 11.904563] pci 0000:01:00.0: supports D1 D2 [ 11.904565] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.904940] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 [ 11.905007] pci 0000:02:00.0: enabling Extended Tags [ 11.905099] pci 0000:02:00.0: supports D1 D2 [ 11.905101] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.905230] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 [ 11.905297] pci 0000:02:01.0: enabling Extended Tags [ 11.905391] pci 0000:02:01.0: supports D1 D2 [ 11.905393] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.905520] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 [ 11.905587] pci 0000:02:02.0: enabling Extended Tags [ 11.905674] pci 0000:02:02.0: supports D1 D2 [ 11.905675] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 11.905807] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 11.905818] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 11.905825] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 11.905885] pci 0000:02:00.0: PCI bridge to [bus 03] [ 11.905894] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 11.905956] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 11.905965] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 11.905972] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 11.906041] pci 0000:02:02.0: PCI bridge to [bus 39] [ 11.906050] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 11.906082] pci_bus 0000:02: Allocating resources [ 11.906111] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 11.906120] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 11.906122] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 11.906132] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 11.906136] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 11.906137] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 11.906139] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 11.906140] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 11.906144] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 11.906145] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 11.906147] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 11.906148] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 11.906149] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 11.906150] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 11.906153] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 11.906154] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 11.906155] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 11.906157] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 11.906158] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 11.906159] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 11.906161] pci 0000:02:00.0: PCI bridge to [bus 03] [ 11.906167] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 11.906176] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 11.906181] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 11.906185] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 11.906191] pci 0000:02:02.0: PCI bridge to [bus 39] [ 11.906197] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 11.906206] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 11.906211] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 11.906215] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 12.516985] pci_bus 0000:02: Allocating resources [ 12.517038] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 12.517057] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 12.517063] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 12.517082] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 12.517092] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 12.517096] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 12.517101] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 12.517105] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 12.517118] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 12.517122] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 12.517126] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 12.517129] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 12.517133] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 12.517137] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 12.517144] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 12.517148] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 12.517152] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 12.517156] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 12.517160] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 12.517163] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 12.665306] Bluetooth: RFCOMM TTY layer initialized [ 12.665333] Bluetooth: RFCOMM socket layer initialized [ 12.665347] Bluetooth: RFCOMM ver 1.11 [ 13.921467] rfkill: input handler disabled [ 17.510067] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 17.510083] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 17.510088] pcieport 0000:00:1c.0: device [8086:9d10] error status/mask=00002001/00002000 [ 17.510093] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 17.585510] pcieport 0000:02:00.0: Refused to change power state, currently in D3 [ 17.587218] pci_bus 0000:03: busn_res: [bus 03] is released [ 17.587335] pci_bus 0000:04: busn_res: [bus 04-38] is released [ 17.587431] pci_bus 0000:39: busn_res: [bus 39] is released [ 17.587525] pci_bus 0000:02: busn_res: [bus 02-39] is released [ 22.677628] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload2-346) [ 22.677645] No Local Variables are initialized for Method [XTBT] [ 22.677648] Initialized Arguments for Method [XTBT]: (2 arguments defined for method invocation) [ 22.677649] Arg0: 000000006c0e956a Integer 0000000000000001 [ 22.677657] Arg1: 000000001d2e2060 Integer 0000000002060002 [ 22.677664] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252) [ 22.677669] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [ 22.677678] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [ 22.677689] ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170831/psparse-550) [ 22.677699] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170831/evgpe-646) [ 36.153756] NET: Registered protocol family 38 [ 37.285042] input: HP Elite Presenter as /devices/virtual/misc/uhid/0005:03F0:464A.0002/input/input24 [ 37.285418] hid-generic 0005:03F0:464A.0002: input,hidraw1: BLUETOOTH HID v0.18 Mouse [HP Elite Presenter] on 9C:B6:D0:EF:06:3E [ 39.346759] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload2-346) [ 39.346790] No Local Variables are initialized for Method [XTBT] [ 39.346796] Initialized Arguments for Method [XTBT]: (2 arguments defined for method invocation) [ 39.346798] Arg0: 0000000018a5c512 Integer 0000000000000001 [ 39.346813] Arg1: 0000000053012580 Integer 0000000002060002 [ 39.346826] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252) [ 39.346837] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [ 39.346855] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [ 39.346875] ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170831/psparse-550) [ 39.346895] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170831/evgpe-646) [ 44.435456] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 44.435471] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 44.435483] pcieport 0000:00:1c.0: device [8086:9d10] error status/mask=00000001/00002000 [ 44.435492] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 221.886695] audit: type=1400 audit(1528133699.773:89): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 221.891302] audit: type=1400 audit(1528133699.777:90): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 222.081556] audit: type=1400 audit(1528133699.969:91): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 222.086776] audit: type=1400 audit(1528133699.973:92): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 784.955125] Bluetooth: hci0: last event is not cmd complete (0x0f) [ 800.826174] Bluetooth: hci0: last event is not cmd complete (0x0f) [ 812.858326] Bluetooth: hci0: last event is not cmd complete (0x0f) [ 828.729316] Bluetooth: hci0: last event is not cmd complete (0x0f) [ 1312.983128] input: HP Elite Presenter as /devices/virtual/misc/uhid/0005:03F0:464A.0003/input/input25 [ 1312.983610] hid-generic 0005:03F0:464A.0003: input,hidraw1: BLUETOOTH HID v0.18 Mouse [HP Elite Presenter] on 9C:B6:D0:EF:06:3E [ 1672.575840] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 1746.428465] wlp58s0: authenticate with 50:64:2b:1a:bc:22 [ 1746.457214] wlp58s0: send auth to 50:64:2b:1a:bc:22 (try 1/3) [ 1746.458777] wlp58s0: authenticated [ 1746.459754] wlp58s0: associate with 50:64:2b:1a:bc:22 (try 1/3) [ 1746.461361] wlp58s0: RX AssocResp from 50:64:2b:1a:bc:22 (capab=0x111 status=0 aid=1) [ 1746.464195] wlp58s0: associated [ 1746.467775] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 1746.469906] ath: EEPROM regdomain: 0x80fa [ 1746.469907] ath: EEPROM indicates we should expect a country code [ 1746.469908] ath: doing EEPROM country->regdmn map search [ 1746.469908] ath: country maps to regdmn code: 0x37 [ 1746.469909] ath: Country alpha2 being used: FR [ 1746.469910] ath: Regpair used: 0x37 [ 1746.469911] ath: regdomain 0x80fa dynamically updated by country IE [ 1746.474279] wlp58s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 50:64:2b:1a:bc:22 [ 1759.902071] audit: type=1400 audit(1528135237.818:93): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 1759.913298] audit: type=1400 audit(1528135237.830:94): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 4450.536009] wlp58s0: deauthenticating from 50:64:2b:1a:bc:22 by local choice (Reason: 3=DEAUTH_LEAVING) [ 4454.113869] PM: suspend entry (deep) [ 4454.113873] PM: Syncing filesystems ... done. [ 4454.154281] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 4454.157791] OOM killer disabled. [ 4454.157791] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4454.159260] Suspending console(s) (use no_console_suspend to debug) [ 4454.362819] psmouse serio1: Failed to disable mouse on isa0060/serio1 [ 4455.447456] ACPI: Preparing to enter system sleep state S3 [ 4455.495485] ACPI: EC: event blocked [ 4455.495486] ACPI: EC: EC stopped [ 4455.495487] PM: Saving platform NVS memory [ 4455.497974] Disabling non-boot CPUs ... [ 4455.512490] smpboot: CPU 1 is now offline [ 4455.544446] smpboot: CPU 2 is now offline [ 4455.577398] smpboot: CPU 3 is now offline [ 4455.599294] IRQ 137: no longer affine to CPU4 [ 4455.601228] smpboot: CPU 4 is now offline [ 4455.627272] IRQ 123: no longer affine to CPU5 [ 4455.627289] IRQ 129: no longer affine to CPU5 [ 4455.628311] smpboot: CPU 5 is now offline [ 4455.663240] IRQ 124: no longer affine to CPU6 [ 4455.663249] IRQ 125: no longer affine to CPU6 [ 4455.664279] smpboot: CPU 6 is now offline [ 4455.695224] IRQ 126: no longer affine to CPU7 [ 4455.696262] smpboot: CPU 7 is now offline [ 4455.702863] ACPI: Low-level resume complete [ 4455.702975] ACPI: EC: EC started [ 4455.702976] PM: Restoring platform NVS memory [ 4455.705138] Enabling non-boot CPUs ... [ 4455.705189] x86: Booting SMP configuration: [ 4455.705189] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 4455.705643] cache: parent cpu1 should not be sleeping [ 4455.705851] CPU1 is up [ 4455.705877] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 4455.706328] cache: parent cpu2 should not be sleeping [ 4455.706547] CPU2 is up [ 4455.706571] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 4455.707021] cache: parent cpu3 should not be sleeping [ 4455.707270] CPU3 is up [ 4455.707296] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 4455.707837] cache: parent cpu4 should not be sleeping [ 4455.708084] CPU4 is up [ 4455.708115] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 4455.708565] cache: parent cpu5 should not be sleeping [ 4455.708825] CPU5 is up [ 4455.708869] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 4455.709324] cache: parent cpu6 should not be sleeping [ 4455.709598] CPU6 is up [ 4455.709624] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 4455.710083] cache: parent cpu7 should not be sleeping [ 4455.710377] CPU7 is up [ 4455.718343] ACPI: Waking up from system sleep state S3 [ 4456.881736] ACPI: EC: event unblocked [ 4456.901818] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [ 4456.912306] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [ 4456.925117] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [ 4457.127547] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 4457.403712] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [ 4457.618257] acpi LNXPOWER:13: Turning OFF [ 4457.618516] acpi LNXPOWER:12: Turning OFF [ 4457.618760] acpi LNXPOWER:11: Turning OFF [ 4457.619002] acpi LNXPOWER:10: Turning OFF [ 4457.619293] acpi LNXPOWER:0f: Turning OFF [ 4457.619535] acpi LNXPOWER:0e: Turning OFF [ 4457.619772] acpi LNXPOWER:0d: Turning OFF [ 4457.620012] acpi LNXPOWER:0c: Turning OFF [ 4457.620251] acpi LNXPOWER:0b: Turning OFF [ 4457.620489] acpi LNXPOWER:0a: Turning OFF [ 4457.620729] acpi LNXPOWER:09: Turning OFF [ 4457.620968] acpi LNXPOWER:08: Turning OFF [ 4457.621204] acpi LNXPOWER:07: Turning OFF [ 4457.621441] acpi LNXPOWER:06: Turning OFF [ 4457.621679] acpi LNXPOWER:05: Turning OFF [ 4457.621918] acpi LNXPOWER:04: Turning OFF [ 4457.622156] acpi LNXPOWER:03: Turning OFF [ 4457.622315] acpi LNXPOWER:02: Turning OFF [ 4457.622393] acpi LNXPOWER:01: Turning OFF [ 4457.622471] acpi LNXPOWER:00: Turning OFF [ 4457.622523] OOM killer enabled. [ 4457.622523] Restarting tasks ... done. [ 4457.631073] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 4457.631076] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [ 4457.646570] [drm] RC6 on [ 4457.658985] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 4457.700674] PM: suspend exit [ 4457.715359] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 4458.446470] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [ 4458.449573] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [ 4458.494816] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 4458.600277] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 4462.476469] wlp58s0: authenticate with 50:64:2b:1a:bc:22 [ 4462.510469] wlp58s0: send auth to 50:64:2b:1a:bc:22 (try 1/3) [ 4462.512100] wlp58s0: authenticated [ 4462.515552] wlp58s0: associate with 50:64:2b:1a:bc:22 (try 1/3) [ 4462.517278] wlp58s0: RX AssocResp from 50:64:2b:1a:bc:22 (capab=0x111 status=0 aid=1) [ 4462.520694] wlp58s0: associated [ 4462.525133] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 4462.535728] wlp58s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 50:64:2b:1a:bc:22 [ 4462.537608] ath: EEPROM regdomain: 0x80fa [ 4462.537611] ath: EEPROM indicates we should expect a country code [ 4462.537612] ath: doing EEPROM country->regdmn map search [ 4462.537614] ath: country maps to regdmn code: 0x37 [ 4462.537617] ath: Country alpha2 being used: FR [ 4462.537618] ath: Regpair used: 0x37 [ 4462.537621] ath: regdomain 0x80fa dynamically updated by country IE [ 4514.255876] audit: type=1400 audit(1528140787.542:95): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 4514.264775] audit: type=1400 audit(1528140787.550:96): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1250 comm="cups-browsed" capability=12 capname="net_admin" [ 9292.069768] wlp58s0: deauthenticating from 50:64:2b:1a:bc:22 by local choice (Reason: 3=DEAUTH_LEAVING) [ 9294.500739] PM: suspend entry (deep) [ 9294.500744] PM: Syncing filesystems ... done. [ 9294.606493] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 9294.611006] OOM killer disabled. [ 9294.611007] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9294.612872] Suspending console(s) (use no_console_suspend to debug) [ 9294.917923] ACPI: Preparing to enter system sleep state S3 [ 9294.966028] ACPI: EC: event blocked [ 9294.966029] ACPI: EC: EC stopped [ 9294.966030] PM: Saving platform NVS memory [ 9294.968608] Disabling non-boot CPUs ... [ 9294.983065] smpboot: CPU 1 is now offline [ 9295.008025] smpboot: CPU 2 is now offline [ 9295.038945] smpboot: CPU 3 is now offline [ 9295.062856] smpboot: CPU 4 is now offline [ 9295.085728] IRQ 123: no longer affine to CPU5 [ 9295.086752] smpboot: CPU 5 is now offline [ 9295.117710] IRQ 124: no longer affine to CPU6 [ 9295.117718] IRQ 125: no longer affine to CPU6 [ 9295.117729] IRQ 129: no longer affine to CPU6 [ 9295.118757] smpboot: CPU 6 is now offline [ 9295.145654] IRQ 126: no longer affine to CPU7 [ 9295.145669] IRQ 137: no longer affine to CPU7 [ 9295.146682] smpboot: CPU 7 is now offline [ 9295.152164] ACPI: Low-level resume complete [ 9295.152276] ACPI: EC: EC started [ 9295.152276] PM: Restoring platform NVS memory [ 9295.154439] Enabling non-boot CPUs ... [ 9295.154568] x86: Booting SMP configuration: [ 9295.154568] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9295.155026] cache: parent cpu1 should not be sleeping [ 9295.155237] CPU1 is up [ 9295.155262] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 9295.155715] cache: parent cpu2 should not be sleeping [ 9295.155934] CPU2 is up [ 9295.155956] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 9295.156412] cache: parent cpu3 should not be sleeping [ 9295.156646] CPU3 is up [ 9295.156668] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 9295.157218] cache: parent cpu4 should not be sleeping [ 9295.157475] CPU4 is up [ 9295.157501] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 9295.157957] cache: parent cpu5 should not be sleeping [ 9295.158235] CPU5 is up [ 9295.158258] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 9295.158719] cache: parent cpu6 should not be sleeping [ 9295.158997] CPU6 is up [ 9295.159022] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 9295.159479] cache: parent cpu7 should not be sleeping [ 9295.159772] CPU7 is up [ 9295.167759] ACPI: Waking up from system sleep state S3 [ 9296.332545] ACPI: EC: event unblocked [ 9296.360732] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [ 9296.370982] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [ 9296.383775] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [ 9296.578742] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 9296.854729] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [ 9297.400823] acpi LNXPOWER:13: Turning OFF [ 9297.401026] acpi LNXPOWER:12: Turning OFF [ 9297.401219] acpi LNXPOWER:11: Turning OFF [ 9297.401412] acpi LNXPOWER:10: Turning OFF [ 9297.401602] acpi LNXPOWER:0f: Turning OFF [ 9297.401791] acpi LNXPOWER:0e: Turning OFF [ 9297.401980] acpi LNXPOWER:0d: Turning OFF [ 9297.402206] acpi LNXPOWER:0c: Turning OFF [ 9297.402398] acpi LNXPOWER:0b: Turning OFF [ 9297.402587] acpi LNXPOWER:0a: Turning OFF [ 9297.402779] acpi LNXPOWER:09: Turning OFF [ 9297.402969] acpi LNXPOWER:08: Turning OFF [ 9297.403157] acpi LNXPOWER:07: Turning OFF [ 9297.403346] acpi LNXPOWER:06: Turning OFF [ 9297.403536] acpi LNXPOWER:05: Turning OFF [ 9297.403725] acpi LNXPOWER:04: Turning OFF [ 9297.403914] acpi LNXPOWER:03: Turning OFF [ 9297.404104] acpi LNXPOWER:02: Turning OFF [ 9297.404293] acpi LNXPOWER:01: Turning OFF [ 9297.404482] acpi LNXPOWER:00: Turning OFF [ 9297.404607] OOM killer enabled. [ 9297.404609] Restarting tasks ... done. [ 9297.430526] [drm] RC6 on [ 9297.475689] PM: suspend exit [ 9297.487861] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9297.818813] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 9297.818817] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [ 9297.846775] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 9298.222291] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [ 9298.225305] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [ 9298.271591] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9298.397824] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9302.340138] wlp58s0: authenticate with 50:64:2b:1a:bc:22 [ 9302.376591] wlp58s0: send auth to 50:64:2b:1a:bc:22 (try 1/3) [ 9302.378347] wlp58s0: authenticated [ 9302.382089] wlp58s0: associate with 50:64:2b:1a:bc:22 (try 1/3) [ 9302.383682] wlp58s0: RX AssocResp from 50:64:2b:1a:bc:22 (capab=0x111 status=0 aid=1) [ 9302.386254] wlp58s0: associated [ 9302.389704] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 9302.391162] ath: EEPROM regdomain: 0x80fa [ 9302.391163] ath: EEPROM indicates we should expect a country code [ 9302.391164] ath: doing EEPROM country->regdmn map search [ 9302.391165] ath: country maps to regdmn code: 0x37 [ 9302.391165] ath: Country alpha2 being used: FR [ 9302.391166] ath: Regpair used: 0x37 [ 9302.391167] ath: regdomain 0x80fa dynamically updated by country IE [ 9302.418456] wlp58s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 50:64:2b:1a:bc:22 [ 9327.416412] wlp58s0: deauthenticating from 50:64:2b:1a:bc:22 by local choice (Reason: 3=DEAUTH_LEAVING) [ 9329.931243] PM: suspend entry (deep) [ 9329.931247] PM: Syncing filesystems ... done. [ 9330.002295] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 9330.004757] OOM killer disabled. [ 9330.004758] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9330.006066] Suspending console(s) (use no_console_suspend to debug) [ 9330.306881] ACPI: Preparing to enter system sleep state S3 [ 9330.355132] ACPI: EC: event blocked [ 9330.355134] ACPI: EC: EC stopped [ 9330.355135] PM: Saving platform NVS memory [ 9330.358095] Disabling non-boot CPUs ... [ 9330.375852] smpboot: CPU 1 is now offline [ 9330.395828] smpboot: CPU 2 is now offline [ 9330.423731] smpboot: CPU 3 is now offline [ 9330.438412] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20170831/evregion-300) [ 9330.438438] Initialized Local Variables for Method [ECR1]: [ 9330.438440] Local0: 000000000f9d2461 Integer 0000000000000000 [ 9330.438456] Initialized Arguments for Method [ECR1]: (1 arguments defined for method invocation) [ 9330.438458] Arg0: 00000000e1928216 Integer 0000000000000007 [ 9330.438470] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV.ECR1, AE_BAD_PARAMETER (20170831/psparse-550) [ 9330.438485] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV.ECR2, AE_BAD_PARAMETER (20170831/psparse-550) [ 9330.438497] ACPI Error: Method parse/execution failed \ECRW, AE_BAD_PARAMETER (20170831/psparse-550) [ 9330.438508] ACPI Error: Method parse/execution failed \ECG1, AE_BAD_PARAMETER (20170831/psparse-550) [ 9330.438519] ACPI Error: Method parse/execution failed \NEVT, AE_BAD_PARAMETER (20170831/psparse-550) [ 9330.438529] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ECDV._Q66, AE_BAD_PARAMETER (20170831/psparse-550) [ 9330.447674] smpboot: CPU 4 is now offline [ 9330.474566] IRQ 123: no longer affine to CPU5 [ 9330.474578] IRQ 129: no longer affine to CPU5 [ 9330.475591] smpboot: CPU 5 is now offline [ 9330.490535] IRQ 124: no longer affine to CPU6 [ 9330.490543] IRQ 125: no longer affine to CPU6 [ 9330.491559] smpboot: CPU 6 is now offline [ 9330.514563] IRQ 126: no longer affine to CPU7 [ 9330.514579] IRQ 137: no longer affine to CPU7 [ 9330.515603] smpboot: CPU 7 is now offline [ 9330.521243] ACPI: Low-level resume complete [ 9330.521354] ACPI: EC: EC started [ 9330.521355] PM: Restoring platform NVS memory [ 9330.523512] Enabling non-boot CPUs ... [ 9330.523552] x86: Booting SMP configuration: [ 9330.523553] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9330.524029] cache: parent cpu1 should not be sleeping [ 9330.524238] CPU1 is up [ 9330.524267] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 9330.524751] cache: parent cpu2 should not be sleeping [ 9330.524969] CPU2 is up [ 9330.524995] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 9330.525474] cache: parent cpu3 should not be sleeping [ 9330.525708] CPU3 is up [ 9330.525751] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 9330.526322] cache: parent cpu4 should not be sleeping [ 9330.526578] CPU4 is up [ 9330.526607] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 9330.527092] cache: parent cpu5 should not be sleeping [ 9330.527355] CPU5 is up [ 9330.527440] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 9330.527920] cache: parent cpu6 should not be sleeping [ 9330.528198] CPU6 is up [ 9330.528233] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 9330.528715] cache: parent cpu7 should not be sleeping [ 9330.529004] CPU7 is up [ 9330.537036] ACPI: Waking up from system sleep state S3 [ 9331.701656] ACPI: EC: event unblocked [ 9331.721970] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [ 9331.732446] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [ 9331.745238] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [ 9331.947709] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 9332.223721] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [ 9332.438365] acpi LNXPOWER:13: Turning OFF [ 9332.438615] acpi LNXPOWER:12: Turning OFF [ 9332.438853] acpi LNXPOWER:11: Turning OFF [ 9332.439125] acpi LNXPOWER:10: Turning OFF [ 9332.439364] acpi LNXPOWER:0f: Turning OFF [ 9332.439597] acpi LNXPOWER:0e: Turning OFF [ 9332.439828] acpi LNXPOWER:0d: Turning OFF [ 9332.440062] acpi LNXPOWER:0c: Turning OFF [ 9332.440295] acpi LNXPOWER:0b: Turning OFF [ 9332.440527] acpi LNXPOWER:0a: Turning OFF [ 9332.440762] acpi LNXPOWER:09: Turning OFF [ 9332.440995] acpi LNXPOWER:08: Turning OFF [ 9332.441227] acpi LNXPOWER:07: Turning OFF [ 9332.441458] acpi LNXPOWER:06: Turning OFF [ 9332.441691] acpi LNXPOWER:05: Turning OFF [ 9332.441925] acpi LNXPOWER:04: Turning OFF [ 9332.442054] acpi LNXPOWER:03: Turning OFF [ 9332.442128] acpi LNXPOWER:02: Turning OFF [ 9332.442202] acpi LNXPOWER:01: Turning OFF [ 9332.442276] acpi LNXPOWER:00: Turning OFF [ 9332.442326] OOM killer enabled. [ 9332.442327] Restarting tasks ... done. [ 9332.448276] [drm] RC6 on [ 9332.545845] PM: suspend exit [ 9332.555539] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9332.844032] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 9332.844034] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [ 9332.872033] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 9333.281595] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [ 9333.284721] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [ 9333.328985] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9333.449277] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [ 9337.292491] wlp58s0: authenticate with 50:64:2b:1a:bc:22 [ 9337.325963] wlp58s0: send auth to 50:64:2b:1a:bc:22 (try 1/3) [ 9337.327603] wlp58s0: authenticated [ 9337.330990] wlp58s0: associate with 50:64:2b:1a:bc:22 (try 1/3) [ 9337.332361] wlp58s0: RX AssocResp from 50:64:2b:1a:bc:22 (capab=0x111 status=0 aid=4) [ 9337.335004] wlp58s0: associated [ 9337.337973] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [ 9337.341139] ath: EEPROM regdomain: 0x80fa [ 9337.341140] ath: EEPROM indicates we should expect a country code [ 9337.341141] ath: doing EEPROM country->regdmn map search [ 9337.341142] ath: country maps to regdmn code: 0x37 [ 9337.341143] ath: Country alpha2 being used: FR [ 9337.341143] ath: Regpair used: 0x37 [ 9337.341144] ath: regdomain 0x80fa dynamically updated by country IE [ 9337.416667] wlp58s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 50:64:2b:1a:bc:22 [ 9612.976874] audit: type=1107 audit(1528181104.452:97): pid=1222 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=19459 label="snap.rambox.rambox" peer_pid=5799 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [10437.429077] wlp58s0: deauthenticating from 50:64:2b:1a:bc:22 by local choice (Reason: 3=DEAUTH_LEAVING) [10438.008774] PM: suspend entry (deep) [10438.008776] PM: Syncing filesystems ... done. [10438.069316] Freezing user space processes ... (elapsed 0.302 seconds) done. [10438.371568] OOM killer disabled. [10438.371570] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10438.373523] Suspending console(s) (use no_console_suspend to debug) [10438.819275] ACPI: Preparing to enter system sleep state S3 [10438.867351] ACPI: EC: event blocked [10438.867352] ACPI: EC: EC stopped [10438.867353] PM: Saving platform NVS memory [10438.870376] Disabling non-boot CPUs ... [10438.888147] smpboot: CPU 1 is now offline [10438.908071] smpboot: CPU 2 is now offline [10438.932063] smpboot: CPU 3 is now offline [10438.955966] smpboot: CPU 4 is now offline [10438.986847] IRQ 123: no longer affine to CPU5 [10438.986860] IRQ 129: no longer affine to CPU5 [10438.987873] smpboot: CPU 5 is now offline [10439.002809] IRQ 124: no longer affine to CPU6 [10439.002818] IRQ 125: no longer affine to CPU6 [10439.003834] smpboot: CPU 6 is now offline [10439.026770] IRQ 126: no longer affine to CPU7 [10439.026784] IRQ 137: no longer affine to CPU7 [10439.027798] smpboot: CPU 7 is now offline [10439.033237] ACPI: Low-level resume complete [10439.033349] ACPI: EC: EC started [10439.033349] PM: Restoring platform NVS memory [10439.035510] Enabling non-boot CPUs ... [10439.035578] x86: Booting SMP configuration: [10439.035579] smpboot: Booting Node 0 Processor 1 APIC 0x2 [10439.036030] cache: parent cpu1 should not be sleeping [10439.036239] CPU1 is up [10439.036265] smpboot: Booting Node 0 Processor 2 APIC 0x4 [10439.036729] cache: parent cpu2 should not be sleeping [10439.036943] CPU2 is up [10439.037047] smpboot: Booting Node 0 Processor 3 APIC 0x6 [10439.037501] cache: parent cpu3 should not be sleeping [10439.037729] CPU3 is up [10439.037753] smpboot: Booting Node 0 Processor 4 APIC 0x1 [10439.038293] cache: parent cpu4 should not be sleeping [10439.038553] CPU4 is up [10439.038580] smpboot: Booting Node 0 Processor 5 APIC 0x3 [10439.039033] cache: parent cpu5 should not be sleeping [10439.039297] CPU5 is up [10439.039320] smpboot: Booting Node 0 Processor 6 APIC 0x5 [10439.039777] cache: parent cpu6 should not be sleeping [10439.040053] CPU6 is up [10439.040076] smpboot: Booting Node 0 Processor 7 APIC 0x7 [10439.040531] cache: parent cpu7 should not be sleeping [10439.040824] CPU7 is up [10439.048851] ACPI: Waking up from system sleep state S3 [10440.221715] ACPI: EC: event unblocked [10440.255726] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [10440.266189] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [10440.278927] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [10440.467508] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [10440.743836] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [10440.895001] acpi LNXPOWER:13: Turning OFF [10440.895292] acpi LNXPOWER:12: Turning OFF [10440.895531] acpi LNXPOWER:11: Turning OFF [10440.895768] acpi LNXPOWER:10: Turning OFF [10440.896001] acpi LNXPOWER:0f: Turning OFF [10440.896233] acpi LNXPOWER:0e: Turning OFF [10440.896464] acpi LNXPOWER:0d: Turning OFF [10440.896697] acpi LNXPOWER:0c: Turning OFF [10440.896930] acpi LNXPOWER:0b: Turning OFF [10440.897162] acpi LNXPOWER:0a: Turning OFF [10440.897396] acpi LNXPOWER:09: Turning OFF [10440.897629] acpi LNXPOWER:08: Turning OFF [10440.897860] acpi LNXPOWER:07: Turning OFF [10440.898091] acpi LNXPOWER:06: Turning OFF [10440.898324] acpi LNXPOWER:05: Turning OFF [10440.898557] acpi LNXPOWER:04: Turning OFF [10440.898788] acpi LNXPOWER:03: Turning OFF [10440.899020] acpi LNXPOWER:02: Turning OFF [10440.899276] acpi LNXPOWER:01: Turning OFF [10440.899510] acpi LNXPOWER:00: Turning OFF [10440.899658] OOM killer enabled. [10440.899658] Restarting tasks ... done. [10440.999458] PM: suspend exit [10441.007444] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [10441.273621] [drm] RC6 on [10441.311866] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [10441.311868] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [10441.339822] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [10441.739959] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [10441.743035] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [10441.796201] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [10441.898548] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [10445.833056] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [10445.869972] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [10445.870972] wlp58s0: authenticated [10445.875042] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [10445.878563] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=2) [10445.881158] wlp58s0: associated [10445.887343] ath: EEPROM regdomain: 0x80fa [10445.887345] ath: EEPROM indicates we should expect a country code [10445.887346] ath: doing EEPROM country->regdmn map search [10445.887347] ath: country maps to regdmn code: 0x37 [10445.887348] ath: Country alpha2 being used: FR [10445.887349] ath: Regpair used: 0x37 [10445.887350] ath: regdomain 0x80fa dynamically updated by country IE [10445.917788] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [10445.974296] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [10496.160131] wlp58s0: deauthenticated from 1c:de:a7:cf:9e:1e (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [10497.516465] wlp58s0: authenticate with 50:67:ae:41:65:5e [10497.563053] wlp58s0: send auth to 50:67:ae:41:65:5e (try 1/3) [10497.563825] wlp58s0: authenticated [10497.565914] wlp58s0: associate with 50:67:ae:41:65:5e (try 1/3) [10497.568591] wlp58s0: RX AssocResp from 50:67:ae:41:65:5e (capab=0x111 status=0 aid=6) [10497.571214] wlp58s0: associated [10497.592439] ath: EEPROM regdomain: 0x80fa [10497.592443] ath: EEPROM indicates we should expect a country code [10497.592446] ath: doing EEPROM country->regdmn map search [10497.592448] ath: country maps to regdmn code: 0x37 [10497.592451] ath: Country alpha2 being used: FR [10497.592453] ath: Regpair used: 0x37 [10497.592456] ath: regdomain 0x80fa dynamically updated by country IE [10497.635262] wlp58s0: Limiting TX power to 17 dBm as advertised by 50:67:ae:41:65:5e [11720.045023] wlp58s0: disconnect from AP 50:67:ae:41:65:5e for new auth to 1c:de:a7:cf:9e:1e [11720.052425] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [11720.087412] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [11720.088587] wlp58s0: authenticated [11720.101890] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [11720.104944] wlp58s0: RX ReassocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=2) [11720.107787] wlp58s0: associated [11720.195206] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [11720.209505] ath: EEPROM regdomain: 0x80fa [11720.209509] ath: EEPROM indicates we should expect a country code [11720.209512] ath: doing EEPROM country->regdmn map search [11720.209515] ath: country maps to regdmn code: 0x37 [11720.209518] ath: Country alpha2 being used: FR [11720.209520] ath: Regpair used: 0x37 [11720.209524] ath: regdomain 0x80fa dynamically updated by country IE [11872.239710] dell_wmi: Unknown WMI event type 0x12 [11872.714629] acpi INT3400:00: Unsupported event [0x86] [14399.430791] audit: type=1400 audit(1528189637.485:98): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=28058 comm="snap-confine" capability=2 capname="dac_read_search" [14399.675126] audit: type=1400 audit(1528189637.729:99): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=28164 comm="snap-confine" capability=2 capname="dac_read_search" [16115.497959] acpi INT3400:00: Unsupported event [0x86] [16754.151494] dell_wmi: Unknown WMI event type 0x12 [16754.700991] acpi INT3400:00: Unsupported event [0x86] [16805.090101] wlp58s0: deauthenticating from 1c:de:a7:cf:9e:1e by local choice (Reason: 3=DEAUTH_LEAVING) [16811.833837] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [16811.836766] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [16811.974603] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [16815.821957] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [16815.856083] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [16815.856940] wlp58s0: authenticated [16815.858608] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [16815.861439] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=2) [16815.863881] wlp58s0: associated [16815.868264] ath: EEPROM regdomain: 0x80fa [16815.868265] ath: EEPROM indicates we should expect a country code [16815.868266] ath: doing EEPROM country->regdmn map search [16815.868266] ath: country maps to regdmn code: 0x37 [16815.868267] ath: Country alpha2 being used: FR [16815.868267] ath: Regpair used: 0x37 [16815.868268] ath: regdomain 0x80fa dynamically updated by country IE [16815.943604] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [16815.948709] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [16885.850154] wlp58s0: deauthenticating from 1c:de:a7:cf:9e:1e by local choice (Reason: 3=DEAUTH_LEAVING) [16890.093412] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [16890.096430] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [16890.205837] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [16894.048755] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [16894.085876] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [16894.087262] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 2/3) [16894.088503] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 3/3) [16894.089810] wlp58s0: authentication with 1c:de:a7:cf:9e:1e timed out [16894.472802] wlp58s0: authenticate with 50:67:ae:41:65:5e [16894.519538] wlp58s0: send auth to 50:67:ae:41:65:5e (try 1/3) [16894.544948] wlp58s0: authenticated [16894.550669] wlp58s0: associate with 50:67:ae:41:65:5e (try 1/3) [16894.553354] wlp58s0: RX AssocResp from 50:67:ae:41:65:5e (capab=0x111 status=0 aid=19) [16894.555774] wlp58s0: associated [16894.560061] ath: EEPROM regdomain: 0x80fa [16894.560062] ath: EEPROM indicates we should expect a country code [16894.560063] ath: doing EEPROM country->regdmn map search [16894.560063] ath: country maps to regdmn code: 0x37 [16894.560064] ath: Country alpha2 being used: FR [16894.560064] ath: Regpair used: 0x37 [16894.560065] ath: regdomain 0x80fa dynamically updated by country IE [16894.603066] wlp58s0: Limiting TX power to 17 dBm as advertised by 50:67:ae:41:65:5e [16894.637541] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [17200.254066] wlp58s0: disconnect from AP 50:67:ae:41:65:5e for new auth to 1c:de:a7:cf:9e:1e [17200.261391] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [17200.295926] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [17200.296710] wlp58s0: authenticated [17200.305745] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [17200.308708] wlp58s0: RX ReassocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=1) [17200.311583] wlp58s0: associated [17200.315269] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [17200.342278] ath: EEPROM regdomain: 0x80fa [17200.342280] ath: EEPROM indicates we should expect a country code [17200.342280] ath: doing EEPROM country->regdmn map search [17200.342281] ath: country maps to regdmn code: 0x37 [17200.342282] ath: Country alpha2 being used: FR [17200.342282] ath: Regpair used: 0x37 [17200.342284] ath: regdomain 0x80fa dynamically updated by country IE [17471.944911] wlp58s0: deauthenticated from 1c:de:a7:cf:9e:1e (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [17476.285255] wlp58s0: authenticate with 50:67:ae:41:65:5e [17476.331657] wlp58s0: send auth to 50:67:ae:41:65:5e (try 1/3) [17476.332433] wlp58s0: authenticated [17476.339805] wlp58s0: associate with 50:67:ae:41:65:5e (try 1/3) [17476.342569] wlp58s0: RX AssocResp from 50:67:ae:41:65:5e (capab=0x111 status=0 aid=22) [17476.345381] wlp58s0: associated [17476.357396] ath: EEPROM regdomain: 0x80fa [17476.357398] ath: EEPROM indicates we should expect a country code [17476.357399] ath: doing EEPROM country->regdmn map search [17476.357401] ath: country maps to regdmn code: 0x37 [17476.357402] ath: Country alpha2 being used: FR [17476.357403] ath: Regpair used: 0x37 [17476.357405] ath: regdomain 0x80fa dynamically updated by country IE [17476.382524] wlp58s0: Limiting TX power to 17 dBm as advertised by 50:67:ae:41:65:5e [17503.147709] usb 1-2: new high-speed USB device number 4 using xhci_hcd [17503.301619] usb 1-2: New USB device found, idVendor=04e8, idProduct=6860 [17503.301626] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [17503.301631] usb 1-2: Product: SAMSUNG_Android [17503.301635] usb 1-2: Manufacturer: SAMSUNG [17503.301639] usb 1-2: SerialNumber: ce031713287b40320c [17534.926791] usb 1-2: USB disconnect, device number 4 [17535.411365] usb 1-2: new high-speed USB device number 5 using xhci_hcd [17535.560233] usb 1-2: New USB device found, idVendor=04e8, idProduct=6863 [17535.560236] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [17535.560238] usb 1-2: Product: SAMSUNG_Android [17535.560239] usb 1-2: Manufacturer: SAMSUNG [17535.560241] usb 1-2: SerialNumber: ce031713287b40320c [17536.113025] usbcore: registered new interface driver cdc_ether [17536.117679] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 26:8a:36:bc:11:b6 [17536.117781] usbcore: registered new interface driver rndis_host [17536.126631] rndis_host 1-2:1.0 enp0s20f0u2: renamed from usb0 [17536.155825] IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready [18393.482216] wlp58s0: disconnect from AP 50:67:ae:41:65:5e for new auth to 1c:de:a7:cf:9e:1e [18393.491495] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [18393.527054] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [18393.527880] wlp58s0: authenticated [18393.530356] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [18393.533355] wlp58s0: RX ReassocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=1) [18393.536321] wlp58s0: associated [18393.538439] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [20269.672450] usb 1-2: USB disconnect, device number 5 [20269.672681] rndis_host 1-2:1.0 enp0s20f0u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device [20269.672880] xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr [20269.672883] xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending. [20269.672895] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [25320.021425] wlp58s0: deauthenticating from 1c:de:a7:cf:9e:1e by local choice (Reason: 3=DEAUTH_LEAVING) [25320.271985] PM: suspend entry (deep) [25320.271987] PM: Syncing filesystems ... done. [25320.325390] Freezing user space processes ... (elapsed 0.141 seconds) done. [25320.466772] OOM killer disabled. [25320.466774] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [25320.468976] Suspending console(s) (use no_console_suspend to debug) [25320.919522] ACPI: Preparing to enter system sleep state S3 [25320.967606] ACPI: EC: event blocked [25320.967608] ACPI: EC: EC stopped [25320.967609] PM: Saving platform NVS memory [25320.970312] Disabling non-boot CPUs ... [25320.984441] smpboot: CPU 1 is now offline [25321.008484] smpboot: CPU 2 is now offline [25321.044333] smpboot: CPU 3 is now offline [25321.067348] IRQ 137: no longer affine to CPU4 [25321.068363] smpboot: CPU 4 is now offline [25321.091234] IRQ 123: no longer affine to CPU5 [25321.092257] smpboot: CPU 5 is now offline [25321.123195] IRQ 124: no longer affine to CPU6 [25321.123203] IRQ 125: no longer affine to CPU6 [25321.123214] IRQ 129: no longer affine to CPU6 [25321.124227] smpboot: CPU 6 is now offline [25321.147156] IRQ 126: no longer affine to CPU7 [25321.148182] smpboot: CPU 7 is now offline [25321.154416] ACPI: Low-level resume complete [25321.154528] ACPI: EC: EC started [25321.154528] PM: Restoring platform NVS memory [25321.156685] Enabling non-boot CPUs ... [25321.156746] x86: Booting SMP configuration: [25321.156746] smpboot: Booting Node 0 Processor 1 APIC 0x2 [25321.157197] cache: parent cpu1 should not be sleeping [25321.157411] CPU1 is up [25321.157440] smpboot: Booting Node 0 Processor 2 APIC 0x4 [25321.157889] cache: parent cpu2 should not be sleeping [25321.158111] CPU2 is up [25321.158138] smpboot: Booting Node 0 Processor 3 APIC 0x6 [25321.158589] cache: parent cpu3 should not be sleeping [25321.158822] CPU3 is up [25321.158848] smpboot: Booting Node 0 Processor 4 APIC 0x1 [25321.159386] cache: parent cpu4 should not be sleeping [25321.159652] CPU4 is up [25321.159681] smpboot: Booting Node 0 Processor 5 APIC 0x3 [25321.160141] cache: parent cpu5 should not be sleeping [25321.160407] CPU5 is up [25321.160452] smpboot: Booting Node 0 Processor 6 APIC 0x5 [25321.160910] cache: parent cpu6 should not be sleeping [25321.161185] CPU6 is up [25321.161212] smpboot: Booting Node 0 Processor 7 APIC 0x7 [25321.161676] cache: parent cpu7 should not be sleeping [25321.161967] CPU7 is up [25321.170000] ACPI: Waking up from system sleep state S3 [25322.494508] ACPI: EC: event unblocked [25322.515482] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [25322.522720] acpi INT3400:00: Unsupported event [0x86] [25322.526186] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [25322.537957] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [25322.549828] dell_wmi: Unknown WMI event type 0x12 [25322.783894] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [25322.998759] acpi LNXPOWER:13: Turning OFF [25322.999011] acpi LNXPOWER:12: Turning OFF [25322.999249] acpi LNXPOWER:11: Turning OFF [25322.999486] acpi LNXPOWER:10: Turning OFF [25322.999757] acpi LNXPOWER:0f: Turning OFF [25322.999991] acpi LNXPOWER:0e: Turning OFF [25323.000222] acpi LNXPOWER:0d: Turning OFF [25323.000457] acpi LNXPOWER:0c: Turning OFF [25323.000690] acpi LNXPOWER:0b: Turning OFF [25323.000924] acpi LNXPOWER:0a: Turning OFF [25323.001159] acpi LNXPOWER:09: Turning OFF [25323.001395] acpi LNXPOWER:08: Turning OFF [25323.001626] acpi LNXPOWER:07: Turning OFF [25323.001858] acpi LNXPOWER:06: Turning OFF [25323.002093] acpi LNXPOWER:05: Turning OFF [25323.002327] acpi LNXPOWER:04: Turning OFF [25323.002559] acpi LNXPOWER:03: Turning OFF [25323.002803] acpi LNXPOWER:02: Turning OFF [25323.002876] acpi LNXPOWER:01: Turning OFF [25323.002950] acpi LNXPOWER:00: Turning OFF [25323.002999] OOM killer enabled. [25323.003000] Restarting tasks ... done. [25323.049715] acpi INT3400:00: Unsupported event [0x86] [25323.093253] PM: suspend exit [25323.102666] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [25323.289917] [drm] RC6 on [25323.830712] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [25323.833784] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [25323.879027] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [25323.960094] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [25327.767240] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [25327.801592] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [25327.802566] wlp58s0: authenticated [25327.803541] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [25327.806411] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=1) [25327.808789] wlp58s0: associated [25327.813169] ath: EEPROM regdomain: 0x80fa [25327.813170] ath: EEPROM indicates we should expect a country code [25327.813171] ath: doing EEPROM country->regdmn map search [25327.813171] ath: country maps to regdmn code: 0x37 [25327.813172] ath: Country alpha2 being used: FR [25327.813172] ath: Regpair used: 0x37 [25327.813173] ath: regdomain 0x80fa dynamically updated by country IE [25327.881604] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [25327.891791] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [25657.491946] acpi INT3400:00: Unsupported event [0x86] [25693.064895] wlp58s0: disconnect from AP 1c:de:a7:cf:9e:1e for new auth to 50:67:ae:41:65:5e [25693.072970] wlp58s0: authenticate with 50:67:ae:41:65:5e [25693.120238] wlp58s0: send auth to 50:67:ae:41:65:5e (try 1/3) [25693.121146] wlp58s0: authenticated [25693.141216] wlp58s0: associate with 50:67:ae:41:65:5e (try 1/3) [25693.144093] wlp58s0: RX ReassocResp from 50:67:ae:41:65:5e (capab=0x111 status=0 aid=31) [25693.147539] wlp58s0: associated [25693.246800] wlp58s0: Limiting TX power to 17 dBm as advertised by 50:67:ae:41:65:5e [25693.261382] ath: EEPROM regdomain: 0x80fa [25693.261386] ath: EEPROM indicates we should expect a country code [25693.261389] ath: doing EEPROM country->regdmn map search [25693.261391] ath: country maps to regdmn code: 0x37 [25693.261394] ath: Country alpha2 being used: FR [25693.261396] ath: Regpair used: 0x37 [25693.261399] ath: regdomain 0x80fa dynamically updated by country IE [25697.280945] wlp58s0: deauthenticating from 50:67:ae:41:65:5e by local choice (Reason: 3=DEAUTH_LEAVING) [25699.897787] PM: suspend entry (deep) [25699.897788] PM: Syncing filesystems ... done. [25699.940770] Freezing user space processes ... (elapsed 0.002 seconds) done. [25699.943434] OOM killer disabled. [25699.943434] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [25699.945238] Suspending console(s) (use no_console_suspend to debug) [25700.250147] ACPI: Preparing to enter system sleep state S3 [25700.294152] ACPI: EC: event blocked [25700.294153] ACPI: EC: EC stopped [25700.294154] PM: Saving platform NVS memory [25700.296469] Disabling non-boot CPUs ... [25700.311074] smpboot: CPU 1 is now offline [25700.335118] smpboot: CPU 2 is now offline [25700.367042] smpboot: CPU 3 is now offline [25700.390964] smpboot: CPU 4 is now offline [25700.417853] IRQ 123: no longer affine to CPU5 [25700.417864] IRQ 129: no longer affine to CPU5 [25700.418875] smpboot: CPU 5 is now offline [25700.433885] IRQ 124: no longer affine to CPU6 [25700.433893] IRQ 125: no longer affine to CPU6 [25700.434909] smpboot: CPU 6 is now offline [25700.457776] IRQ 126: no longer affine to CPU7 [25700.457789] IRQ 137: no longer affine to CPU7 [25700.458799] smpboot: CPU 7 is now offline [25700.463780] ACPI: Low-level resume complete [25700.463892] ACPI: EC: EC started [25700.463893] PM: Restoring platform NVS memory [25700.466059] Enabling non-boot CPUs ... [25700.466127] x86: Booting SMP configuration: [25700.466128] smpboot: Booting Node 0 Processor 1 APIC 0x2 [25700.466586] cache: parent cpu1 should not be sleeping [25700.466798] CPU1 is up [25700.466909] smpboot: Booting Node 0 Processor 2 APIC 0x4 [25700.467359] cache: parent cpu2 should not be sleeping [25700.467584] CPU2 is up [25700.467610] smpboot: Booting Node 0 Processor 3 APIC 0x6 [25700.468067] cache: parent cpu3 should not be sleeping [25700.468305] CPU3 is up [25700.468340] smpboot: Booting Node 0 Processor 4 APIC 0x1 [25700.468875] cache: parent cpu4 should not be sleeping [25700.469127] CPU4 is up [25700.469173] smpboot: Booting Node 0 Processor 5 APIC 0x3 [25700.469629] cache: parent cpu5 should not be sleeping [25700.469889] CPU5 is up [25700.469913] smpboot: Booting Node 0 Processor 6 APIC 0x5 [25700.470403] cache: parent cpu6 should not be sleeping [25700.470677] CPU6 is up [25700.470700] smpboot: Booting Node 0 Processor 7 APIC 0x7 [25700.471159] cache: parent cpu7 should not be sleeping [25700.471454] CPU7 is up [25700.479438] ACPI: Waking up from system sleep state S3 [25701.648730] ACPI: EC: event unblocked [25701.691658] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [25701.702144] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [25701.714668] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [25701.894856] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [25702.170948] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [25702.322200] acpi LNXPOWER:13: Turning OFF [25702.322458] acpi LNXPOWER:12: Turning OFF [25702.322695] acpi LNXPOWER:11: Turning OFF [25702.322931] acpi LNXPOWER:10: Turning OFF [25702.323163] acpi LNXPOWER:0f: Turning OFF [25702.323393] acpi LNXPOWER:0e: Turning OFF [25702.323622] acpi LNXPOWER:0d: Turning OFF [25702.323855] acpi LNXPOWER:0c: Turning OFF [25702.324087] acpi LNXPOWER:0b: Turning OFF [25702.324318] acpi LNXPOWER:0a: Turning OFF [25702.324551] acpi LNXPOWER:09: Turning OFF [25702.324783] acpi LNXPOWER:08: Turning OFF [25702.325015] acpi LNXPOWER:07: Turning OFF [25702.325244] acpi LNXPOWER:06: Turning OFF [25702.325476] acpi LNXPOWER:05: Turning OFF [25702.325704] acpi LNXPOWER:04: Turning OFF [25702.325780] acpi LNXPOWER:03: Turning OFF [25702.325856] acpi LNXPOWER:02: Turning OFF [25702.325932] acpi LNXPOWER:01: Turning OFF [25702.326009] acpi LNXPOWER:00: Turning OFF [25702.326060] OOM killer enabled. [25702.326061] Restarting tasks ... done. [25702.423187] [drm] RC6 on [25702.437715] PM: suspend exit [25702.475929] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [25702.727195] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [25702.727197] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [25702.755385] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [25703.205634] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [25703.208648] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [25703.261969] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [25703.378634] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [25707.201979] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [25707.236208] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [25707.237096] wlp58s0: authenticated [25707.238181] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [25707.241207] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=8) [25707.243707] wlp58s0: associated [25707.248173] ath: EEPROM regdomain: 0x80fa [25707.248174] ath: EEPROM indicates we should expect a country code [25707.248175] ath: doing EEPROM country->regdmn map search [25707.248176] ath: country maps to regdmn code: 0x37 [25707.248176] ath: Country alpha2 being used: FR [25707.248177] ath: Regpair used: 0x37 [25707.248178] ath: regdomain 0x80fa dynamically updated by country IE [25707.303023] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [25707.327549] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [28070.253667] wlp58s0: AP 1c:de:a7:cf:9e:1e changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) [28316.542793] wlp58s0: Connection to AP 1c:de:a7:cf:9e:1e lost [28321.662684] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [28322.093811] wlp58s0: authenticate with 50:67:ae:41:65:5e [28322.136259] wlp58s0: send auth to 50:67:ae:41:65:5e (try 1/3) [28322.137019] wlp58s0: authenticated [28322.142458] wlp58s0: associate with 50:67:ae:41:65:5e (try 1/3) [28322.145146] wlp58s0: RX AssocResp from 50:67:ae:41:65:5e (capab=0x111 status=0 aid=7) [28322.148206] wlp58s0: associated [28322.167464] ath: EEPROM regdomain: 0x80fa [28322.167468] ath: EEPROM indicates we should expect a country code [28322.167470] ath: doing EEPROM country->regdmn map search [28322.167473] ath: country maps to regdmn code: 0x37 [28322.167476] ath: Country alpha2 being used: FR [28322.167478] ath: Regpair used: 0x37 [28322.167481] ath: regdomain 0x80fa dynamically updated by country IE [28322.180838] wlp58s0: Limiting TX power to 17 dBm as advertised by 50:67:ae:41:65:5e [28627.748551] wlp58s0: disconnect from AP 50:67:ae:41:65:5e for new auth to 1c:de:a7:cf:9e:1e [28627.756283] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [28627.790873] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [28627.791741] wlp58s0: authenticated [28627.810221] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [28627.813467] wlp58s0: RX ReassocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=1) [28627.816861] wlp58s0: associated [28627.906812] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [28627.924756] ath: EEPROM regdomain: 0x80fa [28627.924760] ath: EEPROM indicates we should expect a country code [28627.924763] ath: doing EEPROM country->regdmn map search [28627.924765] ath: country maps to regdmn code: 0x37 [28627.924769] ath: Country alpha2 being used: FR [28627.924771] ath: Regpair used: 0x37 [28627.924775] ath: regdomain 0x80fa dynamically updated by country IE [30819.258537] wlp58s0: deauthenticating from 1c:de:a7:cf:9e:1e by local choice (Reason: 3=DEAUTH_LEAVING) [30819.842471] PM: suspend entry (deep) [30819.842473] PM: Syncing filesystems ... done. [30819.872220] Freezing user space processes ... (elapsed 0.002 seconds) done. [30819.874617] OOM killer disabled. [30819.874617] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [30819.876162] Suspending console(s) (use no_console_suspend to debug) [30820.166523] ACPI: Preparing to enter system sleep state S3 [30820.210573] ACPI: EC: event blocked [30820.210574] ACPI: EC: EC stopped [30820.210575] PM: Saving platform NVS memory [30820.213091] Disabling non-boot CPUs ... [30820.227549] smpboot: CPU 1 is now offline [30820.247502] smpboot: CPU 2 is now offline [30820.271439] smpboot: CPU 3 is now offline [30820.294365] IRQ 129: no longer affine to CPU4 [30820.295379] smpboot: CPU 4 is now offline [30820.318242] IRQ 123: no longer affine to CPU5 [30820.319263] smpboot: CPU 5 is now offline [30820.334224] IRQ 124: no longer affine to CPU6 [30820.334231] IRQ 125: no longer affine to CPU6 [30820.335245] smpboot: CPU 6 is now offline [30820.358197] IRQ 126: no longer affine to CPU7 [30820.358211] IRQ 137: no longer affine to CPU7 [30820.359221] smpboot: CPU 7 is now offline [30820.364879] ACPI: Low-level resume complete [30820.364992] ACPI: EC: EC started [30820.364992] PM: Restoring platform NVS memory [30820.367154] Enabling non-boot CPUs ... [30820.367217] x86: Booting SMP configuration: [30820.367218] smpboot: Booting Node 0 Processor 1 APIC 0x2 [30820.367674] cache: parent cpu1 should not be sleeping [30820.367892] CPU1 is up [30820.367917] smpboot: Booting Node 0 Processor 2 APIC 0x4 [30820.368369] cache: parent cpu2 should not be sleeping [30820.368589] CPU2 is up [30820.368614] smpboot: Booting Node 0 Processor 3 APIC 0x6 [30820.369068] cache: parent cpu3 should not be sleeping [30820.369307] CPU3 is up [30820.369333] smpboot: Booting Node 0 Processor 4 APIC 0x1 [30820.369870] cache: parent cpu4 should not be sleeping [30820.370134] CPU4 is up [30820.370162] smpboot: Booting Node 0 Processor 5 APIC 0x3 [30820.370640] cache: parent cpu5 should not be sleeping [30820.370902] CPU5 is up [30820.370947] smpboot: Booting Node 0 Processor 6 APIC 0x5 [30820.371403] cache: parent cpu6 should not be sleeping [30820.371691] CPU6 is up [30820.371717] smpboot: Booting Node 0 Processor 7 APIC 0x7 [30820.372181] cache: parent cpu7 should not be sleeping [30820.372482] CPU7 is up [30820.380459] ACPI: Waking up from system sleep state S3 [30821.549208] ACPI: EC: event unblocked [30821.564051] ACPI: button: The lid device is not compliant to SW_LID. [30821.583812] [drm] HuC: Loaded firmware i915/kbl_huc_ver02_00_1810.bin (version 2.0) [30821.594284] [drm] GuC: Loaded firmware i915/kbl_guc_ver9_14.bin (version 9.14) [30821.607093] i915 0000:00:02.0: GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14]) [30821.795358] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [30822.071307] usb 1-5: reset high-speed USB device number 3 using xhci_hcd [30822.286024] acpi LNXPOWER:13: Turning OFF [30822.286273] acpi LNXPOWER:12: Turning OFF [30822.286511] acpi LNXPOWER:11: Turning OFF [30822.286794] acpi LNXPOWER:10: Turning OFF [30822.287030] acpi LNXPOWER:0f: Turning OFF [30822.287263] acpi LNXPOWER:0e: Turning OFF [30822.287495] acpi LNXPOWER:0d: Turning OFF [30822.287729] acpi LNXPOWER:0c: Turning OFF [30822.287963] acpi LNXPOWER:0b: Turning OFF [30822.288196] acpi LNXPOWER:0a: Turning OFF [30822.288431] acpi LNXPOWER:09: Turning OFF [30822.288664] acpi LNXPOWER:08: Turning OFF [30822.288896] acpi LNXPOWER:07: Turning OFF [30822.289128] acpi LNXPOWER:06: Turning OFF [30822.289361] acpi LNXPOWER:05: Turning OFF [30822.289595] acpi LNXPOWER:04: Turning OFF [30822.289830] acpi LNXPOWER:03: Turning OFF [30822.289917] acpi LNXPOWER:02: Turning OFF [30822.290003] acpi LNXPOWER:01: Turning OFF [30822.290089] acpi LNXPOWER:00: Turning OFF [30822.290146] OOM killer enabled. [30822.290147] Restarting tasks ... done. [30822.312081] [drm] RC6 on [30822.388046] PM: suspend exit [30822.395982] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [30822.692597] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [30822.692599] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [30822.720522] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [30823.120908] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [30823.123921] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [30823.166174] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [30823.238534] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [30827.207576] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [30827.245075] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [30827.245916] wlp58s0: authenticated [30827.246610] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [30827.249561] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=3) [30827.252383] wlp58s0: associated [30827.267445] ath: EEPROM regdomain: 0x80fa [30827.267449] ath: EEPROM indicates we should expect a country code [30827.267451] ath: doing EEPROM country->regdmn map search [30827.267454] ath: country maps to regdmn code: 0x37 [30827.267457] ath: Country alpha2 being used: FR [30827.267459] ath: Regpair used: 0x37 [30827.267462] ath: regdomain 0x80fa dynamically updated by country IE [30827.327741] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [30827.343866] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [32994.701549] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 2eddae63-45b9-4c4c-9ea2-f778ed40e3fe) [32994.701566] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [32994.701573] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [32994.703258] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb [32994.704413] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 20d869c3 [32994.704419] ath10k_pci 0000:3a:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [32994.716373] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16 [32994.716377] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16 [32994.716385] ath10k_pci 0000:3a:00.0: Copy Engine register dump: [32994.716402] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 14 14 3 3 [32994.716417] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 2 2 175 176 [32994.716432] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 59 57 56 57 [32994.716446] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 25 25 27 25 [32994.716461] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 3945 3941 243 179 [32994.716490] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0 [32994.716504] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 26 26 22 22 [32994.716519] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 0 1 0 1 [32994.752588] ath10k_pci 0000:3a:00.0: failed to read hi_board_data address: -28 [32994.838445] ieee80211 phy0: Hardware restart was requested [32995.563023] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [32995.566017] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [32995.651516] ath10k_pci 0000:3a:00.0: device successfully recovered [33054.996272] wlp58s0: deauthenticating from 1c:de:a7:cf:9e:1e by local choice (Reason: 3=DEAUTH_LEAVING) [33059.557718] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [33059.561178] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [33059.688526] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [33063.617796] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [33063.656095] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [33063.657580] wlp58s0: authenticated [33063.660018] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [33063.663184] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=3) [33063.666007] wlp58s0: associated [33063.681932] ath: EEPROM regdomain: 0x80fa [33063.681936] ath: EEPROM indicates we should expect a country code [33063.681939] ath: doing EEPROM country->regdmn map search [33063.681942] ath: country maps to regdmn code: 0x37 [33063.681945] ath: Country alpha2 being used: FR [33063.681947] ath: Regpair used: 0x37 [33063.681950] ath: regdomain 0x80fa dynamically updated by country IE [33063.685503] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [33063.765025] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [33095.777671] wlp58s0: deauthenticating from 1c:de:a7:cf:9e:1e by local choice (Reason: 3=DEAUTH_LEAVING) [33100.812393] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 [33106.390161] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809 [33106.393245] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118 [33106.532775] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready [33110.462041] wlp58s0: authenticate with 1c:de:a7:cf:9e:1e [33110.499815] wlp58s0: send auth to 1c:de:a7:cf:9e:1e (try 1/3) [33110.500692] wlp58s0: authenticated [33110.501221] wlp58s0: associate with 1c:de:a7:cf:9e:1e (try 1/3) [33110.504239] wlp58s0: RX AssocResp from 1c:de:a7:cf:9e:1e (capab=0x111 status=0 aid=3) [33110.507436] wlp58s0: associated [33110.523938] ath: EEPROM regdomain: 0x80fa [33110.523942] ath: EEPROM indicates we should expect a country code [33110.523944] ath: doing EEPROM country->regdmn map search [33110.523947] ath: country maps to regdmn code: 0x37 [33110.523950] ath: Country alpha2 being used: FR [33110.523952] ath: Regpair used: 0x37 [33110.523955] ath: regdomain 0x80fa dynamically updated by country IE [33110.583066] wlp58s0: Limiting TX power to 17 dBm as advertised by 1c:de:a7:cf:9e:1e [33110.615201] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [33578.003127] dell_wmi: Unknown WMI event type 0x12 [33578.661630] acpi INT3400:00: Unsupported event [0x86] [33642.747041] input: HP Elite Presenter as /devices/virtual/misc/uhid/0005:03F0:464A.0004/input/input40 [33642.747496] hid-generic 0005:03F0:464A.0004: input,hidraw1: BLUETOOTH HID v0.18 Mouse [HP Elite Presenter] on 9C:B6:D0:EF:06:3E [34509.458420] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload2-346) [34509.458451] No Local Variables are initialized for Method [XTBT] [34509.458457] Initialized Arguments for Method [XTBT]: (2 arguments defined for method invocation) [34509.458459] Arg0: 00000000a89997f1 Integer 0000000000000001 [34509.458475] Arg1: 00000000ade329f5 Integer 0000000002060002 [34509.458488] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252) [34509.458500] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [34509.458517] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550) [34509.458537] ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170831/psparse-550) [34509.458557] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170831/evgpe-646) [34509.571676] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 [34509.571733] pci 0000:01:00.0: enabling Extended Tags [34509.571818] pci 0000:01:00.0: supports D1 D2 [34509.571819] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [34509.572104] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 [34509.572165] pci 0000:02:00.0: enabling Extended Tags [34509.572358] pci 0000:02:00.0: supports D1 D2 [34509.572360] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [34509.572488] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 [34509.572550] pci 0000:02:01.0: enabling Extended Tags [34509.572629] pci 0000:02:01.0: supports D1 D2 [34509.572630] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [34509.572721] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 [34509.572781] pci 0000:02:02.0: enabling Extended Tags [34509.572858] pci 0000:02:02.0: supports D1 D2 [34509.572859] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [34509.572972] pci 0000:01:00.0: PCI bridge to [bus 02-39] [34509.572982] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [34509.572988] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [34509.573053] pci 0000:03:00.0: [8086:1575] type 00 class 0x088000 [34509.573088] pci 0000:03:00.0: reg 0x10: [mem 0xda000000-0xda03ffff] [34509.573099] pci 0000:03:00.0: reg 0x14: [mem 0xda040000-0xda040fff] [34509.573161] pci 0000:03:00.0: enabling Extended Tags [34509.573257] pci 0000:03:00.0: supports D1 D2 [34509.573259] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [34509.573409] pci 0000:02:00.0: PCI bridge to [bus 03] [34509.573418] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [34509.573477] pci 0000:02:01.0: PCI bridge to [bus 04-38] [34509.573486] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [34509.573492] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [34509.573580] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 [34509.573641] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff] [34509.573878] pci 0000:39:00.0: supports D1 D2 [34509.573880] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [34509.574648] pci 0000:02:02.0: PCI bridge to [bus 39] [34509.574658] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [34509.574689] pci_bus 0000:02: Allocating resources [34509.574744] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [34509.574758] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [34509.574760] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [34509.574770] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [34509.574774] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [34509.574775] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [34509.574778] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [34509.574779] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [34509.574783] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [34509.574784] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [34509.574786] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [34509.574787] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [34509.574789] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [34509.574790] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [34509.574793] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [34509.574794] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [34509.574795] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [34509.574797] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [34509.574798] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [34509.574799] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [34509.574801] pci 0000:02:00.0: PCI bridge to [bus 03] [34509.574807] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [34509.574816] pci 0000:02:01.0: PCI bridge to [bus 04-38] [34509.574821] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [34509.574825] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [34509.574832] pci 0000:02:02.0: PCI bridge to [bus 39] [34509.574837] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [34509.574845] pci 0000:01:00.0: PCI bridge to [bus 02-39] [34509.574850] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [34509.574854] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [34509.577839] xhci_hcd 0000:39:00.0: xHCI Host Controller [34509.577843] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [34509.579025] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810 [34509.579292] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [34509.579294] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [34509.579296] usb usb3: Product: xHCI Host Controller [34509.579297] usb usb3: Manufacturer: Linux 4.15.0-22-generic xhci-hcd [34509.579298] usb usb3: SerialNumber: 0000:39:00.0 [34509.579763] hub 3-0:1.0: USB hub found [34509.579771] hub 3-0:1.0: 2 ports detected [34509.580453] thunderbolt 0000:03:00.0: NHI initialized, starting thunderbolt [34509.580456] thunderbolt 0000:03:00.0: allocating TX ring 0 of size 10 [34509.580471] thunderbolt 0000:03:00.0: allocating RX ring 0 of size 10 [34509.580484] thunderbolt 0000:03:00.0: control channel created [34509.580486] thunderbolt 0000:03:00.0: control channel starting... [34509.580487] thunderbolt 0000:03:00.0: starting TX ring 0 [34509.580494] thunderbolt 0000:03:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1) [34509.580495] thunderbolt 0000:03:00.0: starting RX ring 0 [34509.580502] thunderbolt 0000:03:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001) [34509.580538] xhci_hcd 0000:39:00.0: xHCI Host Controller [34509.580541] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [34509.580544] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [34509.580574] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [34509.580575] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [34509.580577] usb usb4: Product: xHCI Host Controller [34509.580578] usb usb4: Manufacturer: Linux 4.15.0-22-generic xhci-hcd [34509.580579] usb usb4: SerialNumber: 0000:39:00.0 [34509.580665] hub 4-0:1.0: USB hub found [34509.580673] hub 4-0:1.0: 2 ports detected [34509.676292] thunderbolt 0000:03:00.0: current switch config: [34509.676299] thunderbolt 0000:03:00.0: Switch: 8086:1576 (Revision: 4, TB Version: 2) [34509.676303] thunderbolt 0000:03:00.0: Max Port Number: 11 [34509.676306] thunderbolt 0000:03:00.0: Config: [34509.676311] thunderbolt 0000:03:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms [34509.676315] thunderbolt 0000:03:00.0: unknown1: 0x0 unknown4: 0x0 [34509.718960] thunderbolt 0000:03:00.0: 0: uid: 0xd46e3fa001d300 [34509.720368] thunderbolt 0000:03:00.0: Port 0: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1)) [34509.720374] thunderbolt 0000:03:00.0: Max hop id (in/out): 7/7 [34509.720377] thunderbolt 0000:03:00.0: Max counters: 8 [34509.720380] thunderbolt 0000:03:00.0: NFC Credits: 0x800000 [34509.721057] thunderbolt 0000:03:00.0: Port 1: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1)) [34509.721062] thunderbolt 0000:03:00.0: Max hop id (in/out): 15/15 [34509.721066] thunderbolt 0000:03:00.0: Max counters: 16 [34509.721069] thunderbolt 0000:03:00.0: NFC Credits: 0x3c00000 [34509.721529] thunderbolt 0000:03:00.0: Port 2: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1)) [34509.721535] thunderbolt 0000:03:00.0: Max hop id (in/out): 15/15 [34509.721539] thunderbolt 0000:03:00.0: Max counters: 16 [34509.721544] thunderbolt 0000:03:00.0: NFC Credits: 0x3c00000 [34509.721549] thunderbolt 0000:03:00.0: 0:3: disabled by eeprom [34509.721553] thunderbolt 0000:03:00.0: 0:4: disabled by eeprom [34509.721558] thunderbolt 0000:03:00.0: 0:5: disabled by eeprom [34509.721649] thunderbolt 0000:03:00.0: Port 6: 8086:1576 (Revision: 4, TB Version: 1, Type: PCIe (0x100101)) [34509.721654] thunderbolt 0000:03:00.0: Max hop id (in/out): 8/8 [34509.721658] thunderbolt 0000:03:00.0: Max counters: 2 [34509.721662] thunderbolt 0000:03:00.0: NFC Credits: 0x800000 [34509.721776] thunderbolt 0000:03:00.0: Port 7: 8086:1576 (Revision: 4, TB Version: 1, Type: PCIe (0x100101)) [34509.721781] thunderbolt 0000:03:00.0: Max hop id (in/out): 8/8 [34509.721786] thunderbolt 0000:03:00.0: Max counters: 2 [34509.721791] thunderbolt 0000:03:00.0: NFC Credits: 0x800000 [34509.721796] thunderbolt 0000:03:00.0: 0:8: disabled by eeprom [34509.721915] thunderbolt 0000:03:00.0: Port 9: 8086:1576 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101)) [34509.721920] thunderbolt 0000:03:00.0: Max hop id (in/out): 9/9 [34509.721923] thunderbolt 0000:03:00.0: Max counters: 2 [34509.721927] thunderbolt 0000:03:00.0: NFC Credits: 0x1000000 [34509.722042] thunderbolt 0000:03:00.0: Port 10: 8086:1576 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101)) [34509.722046] thunderbolt 0000:03:00.0: Max hop id (in/out): 9/9 [34509.722049] thunderbolt 0000:03:00.0: Max counters: 2 [34509.722052] thunderbolt 0000:03:00.0: NFC Credits: 0x1000000 [34509.722056] thunderbolt 0000:03:00.0: 0:b: disabled by eeprom [34528.438602] xhci_hcd 0000:39:00.0: remove, state 4 [34528.438610] usb usb4: USB disconnect, device number 1 [34528.438846] xhci_hcd 0000:39:00.0: USB bus 4 deregistered [34528.438853] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead [34528.438856] xhci_hcd 0000:39:00.0: remove, state 4 [34528.438860] usb usb3: USB disconnect, device number 1 [34528.439059] xhci_hcd 0000:39:00.0: Host halt failed, -19 [34528.439062] xhci_hcd 0000:39:00.0: Host not accessible, reset failed. [34528.439140] xhci_hcd 0000:39:00.0: USB bus 3 deregistered [34528.954653] thunderbolt 0000:03:00.0: stopping RX ring 0 [34528.954668] thunderbolt 0000:03:00.0: disabling interrupt at register 0x38200 bit 12 (0xffffffff -> 0xffffefff) [34528.954693] thunderbolt 0000:03:00.0: stopping TX ring 0 [34528.954706] thunderbolt 0000:03:00.0: disabling interrupt at register 0x38200 bit 0 (0xffffffff -> 0xfffffffe) [34528.954720] thunderbolt 0000:03:00.0: control channel stopped [34528.954901] thunderbolt 0000:03:00.0: freeing RX ring 0 [34528.954919] thunderbolt 0000:03:00.0: freeing TX ring 0 [34528.954944] thunderbolt 0000:03:00.0: shutdown [34528.998339] pci_bus 0000:02: Allocating resources [34528.998367] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [34528.998376] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [34528.998377] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [34528.998386] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [34528.998389] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [34528.998390] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [34528.998392] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [34528.998392] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [34528.998396] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [34528.998397] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [34528.998398] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [34528.998399] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [34528.998399] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [34528.998400] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [34528.998402] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [34528.998403] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [34528.998404] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [34528.998405] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [34528.998405] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [34528.998406] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [34533.495720] pcieport 0000:02:00.0: Refused to change power state, currently in D3 [34533.497517] pci_bus 0000:03: busn_res: [bus 03] is released [34533.497629] pci_bus 0000:04: busn_res: [bus 04-38] is released [34533.497728] pci_bus 0000:39: busn_res: [bus 39] is released [34533.497826] pci_bus 0000:02: busn_res: [bus 02-39] is released [36714.611298] TCP: wlp58s0: Driver has suspect GRO implementation, TCP performance may be compromised.