[ 0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16 [ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=0ebbe8b4-a902-49f3-bf6b-7371bc38e0e6 ro noquiet nosplash intel_iommu=on cgroup_enable=memory swapaccount=1 spectre_v2=off nopti [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c90fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c90fb000-0x00000000c9c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c9c7f000-0x00000000c9e7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c9e7f000-0x00000000c9efefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c9eff000-0x00000000c9efffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c9f00000-0x00000000ce7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by HP [ 0.000000] efi: ACPI=0xc9efe000 ACPI 2.0=0xc9efe014 SMBIOS=0xc98db000 ESRT=0xc9076660 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP HP EliteBook 1030 G1/80FB, BIOS N86 Ver. 01.04 08/09/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x42f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xc9f00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] Kernel/User page tables isolation: disabled on command line. [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2bbb3e000, 0x2bbb3efff] PGTABLE [ 0.000000] BRK [0x2bbb3f000, 0x2bbb3ffff] PGTABLE [ 0.000000] BRK [0x2bbb40000, 0x2bbb40fff] PGTABLE [ 0.000000] BRK [0x2bbb41000, 0x2bbb41fff] PGTABLE [ 0.000000] BRK [0x2bbb42000, 0x2bbb42fff] PGTABLE [ 0.000000] BRK [0x2bbb43000, 0x2bbb43fff] PGTABLE [ 0.000000] BRK [0x2bbb44000, 0x2bbb44fff] PGTABLE [ 0.000000] BRK [0x2bbb45000, 0x2bbb45fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3c9a3000-0x3fffdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000C9EFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000C9EBB188 0000DC (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000C9EEC000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000C9EC3000 025A49 (v02 HPQOEM 80FB 00000000 INTL 20121018) [ 0.000000] ACPI: FACS 0x00000000C9E58000 000040 [ 0.000000] ACPI: SSDT 0x00000000C9EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018) [ 0.000000] ACPI: TCPA 0x00000000C9EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C9EF7000 002D2A (v02 DptfTa DptfTabl 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C9EF6000 00038A (v02 HPQOEM Tpm2Tabl 00001000 INTL 20121018) [ 0.000000] ACPI: TPM2 0x00000000C9EF5000 000034 (v03 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000C9E6A000 000042 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C9EEF000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C9EEE000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018) [ 0.000000] ACPI: MSDM 0x00000000C9EED000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: HPET 0x00000000C9EEB000 000038 (v01 HPQOEM 80FB 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000C9EEA000 0000BC (v01 HPQOEM 80FB 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000C9EE9000 00003C (v01 HPQOEM 80FB 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000C9EC2000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C9EC1000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C9EC0000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C9EBF000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: DMAR 0x00000000C9EBE000 0000F0 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: NHLT 0x00000000C9EBD000 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000C9EBC000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240) [ 0.000000] ACPI: FPDT 0x00000000C9EFD000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: BGRT 0x00000000C9EBA000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C9EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x42f7d5000-0x42f7fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000042f7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c90fafff] [ 0.000000] node 0: [mem 0x00000000c9eff000-0x00000000c9efffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f7fffff] [ 0.000000] On node 0 totalpages: 4163736 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12804 pages used for memmap [ 0.000000] DMA32 zone: 819452 pages, LIFO batch:31 [ 0.000000] Normal zone: 52192 pages used for memmap [ 0.000000] Normal zone: 3340288 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000cc800000-0x00000000ce7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc90fb000-0xc9c7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9c7f000-0xc9e7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9e7f000-0xc9efefff] [ 0.000000] PM: Registered nosave memory: [mem 0xc9f00000-0xce7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xce800000-0xf80f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.000000] e820: [mem 0xce800000-0xf80f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4098655 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=0ebbe8b4-a902-49f3-bf6b-7371bc38e0e6 ro noquiet nosplash intel_iommu=on cgroup_enable=memory swapaccount=1 spectre_v2=off nopti [ 0.000000] DMAR: IOMMU enabled [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16160520K/16654944K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 494424K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39065 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] DMAR: Host address width 39 [ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.004000] DMAR: RMRR base: 0x000000c9c37000 end: 0x000000c9c56fff [ 0.004000] DMAR: RMRR base: 0x000000cc000000 end: 0x000000ce7fffff [ 0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.004000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.004000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.004000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.004000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Detected 1500.000 MHz processor [ 0.028000] tsc: Detected 1512.000 MHz TSC [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3024.00 BogoMIPS (lpj=6048000) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028000] CPU: Physical Processor ID: 0 [ 0.028000] CPU: Processor Core ID: 0 [ 0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028000] mce: CPU supports 8 MCE banks [ 0.028000] CPU0: Thermal monitoring enabled (TM1) [ 0.028000] process: using mwait in idle threads [ 0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.028000] Spectre V2 : off selected on command line. [ 0.032193] Freeing SMP alternatives memory: 36K [ 0.036126] TSC deadline timer enabled [ 0.036130] smpboot: CPU0: Intel(R) Core(TM) m7-6Y75 CPU @ 1.20GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.036179] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.036208] ... version: 4 [ 0.036209] ... bit width: 48 [ 0.036210] ... generic registers: 4 [ 0.036212] ... value mask: 0000ffffffffffff [ 0.036213] ... max period: 00007fffffffffff [ 0.036214] ... fixed-purpose events: 3 [ 0.036215] ... event mask: 000000070000000f [ 0.036248] Hierarchical SRCU implementation. [ 0.037045] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.037056] smp: Bringing up secondary CPUs ... [ 0.037110] x86: Booting SMP configuration: [ 0.037112] .... node #0, CPUs: #1 #2 #3 [ 0.040009] smp: Brought up 1 node, 4 CPUs [ 0.040014] smpboot: Max logical packages: 1 [ 0.040016] smpboot: Total of 4 processors activated (12096.00 BogoMIPS) [ 0.044427] devtmpfs: initialized [ 0.044427] x86/mm: Memory block size: 128MB [ 0.045017] evm: security.selinux [ 0.045019] evm: security.SMACK64 [ 0.045020] evm: security.SMACK64EXEC [ 0.045021] evm: security.SMACK64TRANSMUTE [ 0.045023] evm: security.SMACK64MMAP [ 0.045024] evm: security.apparmor [ 0.045025] evm: security.ima [ 0.045026] evm: security.capability [ 0.045037] PM: Registering ACPI NVS region [mem 0xc9c7f000-0xc9e7efff] (2097152 bytes) [ 0.045037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.045037] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.045037] pinctrl core: initialized pinctrl subsystem [ 0.045037] RTC time: 17:42:05, date: 04/26/18 [ 0.045037] NET: Registered protocol family 16 [ 0.045037] audit: initializing netlink subsys (disabled) [ 0.045037] audit: type=2000 audit(1524764525.044:1): state=initialized audit_enabled=0 res=1 [ 0.045037] cpuidle: using governor ladder [ 0.045037] cpuidle: using governor menu [ 0.045037] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.045037] ACPI: bus type PCI registered [ 0.045037] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.045037] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.045037] PCI: not using MMCONFIG [ 0.045037] PCI: Using configuration type 1 for base access [ 0.045037] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.045037] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.045037] ACPI: Added _OSI(Module Device) [ 0.045037] ACPI: Added _OSI(Processor Device) [ 0.045037] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.045037] ACPI: Added _OSI(Processor Aggregator Device) [ 0.048325] ACPI: Executed 17 blocks of module-level executable AML code [ 0.062522] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.068296] ACPI: Dynamic OEM Table Load: [ 0.068309] ACPI: SSDT 0xFFFF91A11C4DF800 000492 (v02 PmRef Cpu0Ist 00003000 INTL 20121018) [ 0.068600] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.069833] ACPI: Dynamic OEM Table Load: [ 0.069841] ACPI: SSDT 0xFFFF91A11C557800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018) [ 0.070177] ACPI: Dynamic OEM Table Load: [ 0.070183] ACPI: SSDT 0xFFFF91A11C5629C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121018) [ 0.070411] ACPI: Dynamic OEM Table Load: [ 0.070417] ACPI: SSDT 0xFFFF91A11C577000 000130 (v02 PmRef HwpLvt 00003000 INTL 20121018) [ 0.071157] ACPI: Dynamic OEM Table Load: [ 0.071166] ACPI: SSDT 0xFFFF91A11C4DB800 0005AA (v02 PmRef ApIst 00003000 INTL 20121018) [ 0.071787] ACPI: Dynamic OEM Table Load: [ 0.071794] ACPI: SSDT 0xFFFF91A11C576000 000119 (v02 PmRef ApHwp 00003000 INTL 20121018) [ 0.072131] ACPI: Dynamic OEM Table Load: [ 0.072137] ACPI: SSDT 0xFFFF91A11C507600 000119 (v02 PmRef ApCst 00003000 INTL 20121018) [ 0.074116] ACPI: EC: EC started [ 0.074119] ACPI: EC: interrupt blocked [ 0.092051] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.092054] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.092056] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.092058] ACPI: Interpreter enabled [ 0.092107] ACPI: (supports S0 S3 S4 S5) [ 0.092110] ACPI: Using IOAPIC for interrupt routing [ 0.092150] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.094748] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.094756] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.095399] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.096995] ACPI: Power Resource [PG01] (on) [ 0.097390] ACPI: Power Resource [PG02] (on) [ 0.097865] ACPI: Power Resource [PG00] (on) [ 0.103677] ACPI: Power Resource [WRST] (off) [ 0.103934] ACPI: Power Resource [PXP] (on) [ 0.357223] ACPI: Power Resource [WRST] (off) [ 0.358247] ACPI: Power Resource [WRST] (off) [ 0.359259] ACPI: Power Resource [WRST] (off) [ 0.360274] ACPI: Power Resource [WRST] (off) [ 0.361218] ACPI: Power Resource [WRST] (off) [ 0.361648] ACPI: Power Resource [WRST] (off) [ 0.362070] ACPI: Power Resource [WRST] (off) [ 0.362981] ACPI: Power Resource [WRST] (off) [ 0.363406] ACPI: Power Resource [WRST] (off) [ 0.363834] ACPI: Power Resource [WRST] (off) [ 0.364274] ACPI: Power Resource [WRST] (off) [ 0.364664] ACPI: Power Resource [WRST] (off) [ 0.365057] ACPI: Power Resource [WRST] (off) [ 0.365454] ACPI: Power Resource [WRST] (off) [ 0.365848] ACPI: Power Resource [WRST] (off) [ 0.366240] ACPI: Power Resource [WRST] (off) [ 0.366641] ACPI: Power Resource [WRST] (off) [ 0.367032] ACPI: Power Resource [WRST] (off) [ 0.367432] ACPI: Power Resource [WRST] (off) [ 0.376440] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.376448] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.379587] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.379590] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.381537] PCI host bridge to bus 0000:00 [ 0.381540] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.381542] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.381544] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.381546] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.381548] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.381550] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.381552] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.381554] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.381556] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.381557] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.381559] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.381561] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.381563] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.381565] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.381567] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.381568] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.381570] pci_bus 0000:00: root bus resource [mem 0xce800000-0xf7ffffff window] [ 0.381572] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.381574] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.381584] pci 0000:00:00.0: [8086:190c] type 00 class 0x060000 [ 0.382305] pci 0000:00:02.0: [8086:191e] type 00 class 0x030000 [ 0.382314] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.382319] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.382322] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.382334] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.383054] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.383064] pci 0000:00:04.0: reg 0x10: [mem 0xe1140000-0xe1147fff 64bit] [ 0.383857] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.383875] pci 0000:00:14.0: reg 0x10: [mem 0xe1120000-0xe112ffff 64bit] [ 0.383934] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.384679] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.384697] pci 0000:00:14.2: reg 0x10: [mem 0xe1153000-0xe1153fff 64bit] [ 0.385515] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.385613] pci 0000:00:15.0: reg 0x10: [mem 0xe1154000-0xe1154fff 64bit] [ 0.386628] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.386767] pci 0000:00:15.1: reg 0x10: [mem 0xe1155000-0xe1155fff 64bit] [ 0.387770] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.387788] pci 0000:00:16.0: reg 0x10: [mem 0xe1156000-0xe1156fff 64bit] [ 0.387848] pci 0000:00:16.0: PME# supported from D3hot [ 0.388571] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 [ 0.388586] pci 0000:00:16.3: reg 0x10: [io 0x3080-0x3087] [ 0.388591] pci 0000:00:16.3: reg 0x14: [mem 0xe1152000-0xe1152fff] [ 0.389334] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.389347] pci 0000:00:17.0: reg 0x10: [mem 0xe1150000-0xe1151fff] [ 0.389353] pci 0000:00:17.0: reg 0x14: [mem 0xe1159000-0xe11590ff] [ 0.389360] pci 0000:00:17.0: reg 0x18: [io 0x3088-0x308f] [ 0.389366] pci 0000:00:17.0: reg 0x1c: [io 0x3090-0x3093] [ 0.389373] pci 0000:00:17.0: reg 0x20: [io 0x3040-0x305f] [ 0.389379] pci 0000:00:17.0: reg 0x24: [mem 0xe1157000-0xe11577ff] [ 0.389414] pci 0000:00:17.0: PME# supported from D3hot [ 0.390161] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.390242] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.391029] pci 0000:00:1f.0: [8086:9d46] type 00 class 0x060100 [ 0.391818] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.391830] pci 0000:00:1f.2: reg 0x10: [mem 0xe1148000-0xe114bfff] [ 0.392588] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380 [ 0.392612] pci 0000:00:1f.3: reg 0x10: [mem 0xe114c000-0xe114ffff 64bit] [ 0.392636] pci 0000:00:1f.3: reg 0x20: [mem 0xe1130000-0xe113ffff 64bit] [ 0.392683] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.393437] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.393490] pci 0000:00:1f.4: reg 0x10: [mem 0xe1158000-0xe11580ff 64bit] [ 0.393539] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.394324] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000 [ 0.394346] pci 0000:00:1f.6: reg 0x10: [mem 0xe1100000-0xe111ffff] [ 0.394430] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.395453] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000 [ 0.395545] pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit] [ 0.395802] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.408288] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 0.408302] pci 0000:00:1d.0: bridge window [mem 0xe1000000-0xe10fffff] [ 0.412692] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.412807] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.412919] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.413030] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.413143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.413251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.413359] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.413466] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.414175] ACPI: EC: interrupt unblocked [ 0.414189] ACPI: EC: event unblocked [ 0.414202] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.414206] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.414476] SCSI subsystem initialized [ 0.414515] libata version 3.00 loaded. [ 0.414515] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.414515] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.414515] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.414515] vgaarb: loaded [ 0.414515] ACPI: bus type USB registered [ 0.414515] usbcore: registered new interface driver usbfs [ 0.414515] usbcore: registered new interface driver hub [ 0.414515] usbcore: registered new device driver usb [ 0.414515] EDAC MC: Ver: 3.0.0 [ 0.414515] Registered efivars operations [ 0.447758] PCI: Using ACPI for IRQ routing [ 0.450885] PCI: pci_cache_line_size set to 64 bytes [ 0.451458] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.451459] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.451459] e820: reserve RAM buffer [mem 0xc90fb000-0xcbffffff] [ 0.451460] e820: reserve RAM buffer [mem 0xc9f00000-0xcbffffff] [ 0.451461] e820: reserve RAM buffer [mem 0x42f800000-0x42fffffff] [ 0.451539] NetLabel: Initializing [ 0.451541] NetLabel: domain hash size = 128 [ 0.451542] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.451554] NetLabel: unlabeled traffic allowed by default [ 0.452106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.452112] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.456003] clocksource: Switched to clocksource hpet [ 0.464806] VFS: Disk quotas dquot_6.6.0 [ 0.464818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.464917] AppArmor: AppArmor Filesystem Enabled [ 0.464936] pnp: PnP ACPI init [ 0.465112] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.465115] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.465117] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.465119] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.465121] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.465125] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.465319] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.465322] system 00:01: [io 0xffff] has been reserved [ 0.465323] system 00:01: [io 0xffff] has been reserved [ 0.465325] system 00:01: [io 0xffff] has been reserved [ 0.465327] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.465329] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.465332] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.465427] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.465460] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.465464] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.465479] pnp 00:04: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 0.465494] pnp 00:05: Plug and Play ACPI device, IDs ALP010e ALP0002 PNP0f13 (active) [ 0.465557] system 00:06: [io 0x0200-0x023f] has been reserved [ 0.465559] system 00:06: [mem 0xfedf0000-0xfedfffff] has been reserved [ 0.465562] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.466756] system 00:07: [mem 0xfe031000-0xfe031fff] has been reserved [ 0.466759] system 00:07: [mem 0xfe030008-0xfe030fff] has been reserved [ 0.466762] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.467207] system 00:08: [mem 0xfe030000-0xfe030007] has been reserved [ 0.467211] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.467479] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.467482] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.467484] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.467486] system 00:09: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.467488] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.467490] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.467492] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.467495] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.467497] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.467499] system 00:09: [mem 0xce800000-0xce81ffff] has been reserved [ 0.467502] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.467869] pnp: PnP ACPI: found 10 devices [ 0.476166] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.476180] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 0.476185] pci 0000:00:1d.0: bridge window [mem 0xe1000000-0xe10fffff] [ 0.476192] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.476193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.476194] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.476194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.476195] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.476196] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.476197] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.476197] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.476198] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.476199] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.476200] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.476200] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.476201] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.476202] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.476203] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.476203] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.476204] pci_bus 0000:00: resource 20 [mem 0xce800000-0xf7ffffff window] [ 0.476205] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window] [ 0.476206] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.476342] NET: Registered protocol family 2 [ 0.476512] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.476682] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.476775] TCP: Hash tables configured (established 131072 bind 65536) [ 0.476803] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.476848] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.476900] NET: Registered protocol family 1 [ 0.476910] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.477404] PCI: CLS 0 bytes, default 64 [ 0.477432] Unpacking initramfs... [ 1.195394] Freeing initrd memory: 55660K [ 1.195433] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.0 [ 1.195438] DMAR: ACPI device "device:6c" under DMAR at fed91000 as 00:15.1 [ 1.195447] DMAR: No ATSR found [ 1.195474] DMAR: dmar0: Using Queued invalidation [ 1.195479] DMAR: dmar1: Using Queued invalidation [ 1.195592] DMAR: Setting RMRR: [ 1.195649] DMAR: Setting identity map for device 0000:00:02.0 [0xcc000000 - 0xce7fffff] [ 1.195681] DMAR: Setting identity map for device 0000:00:14.0 [0xc9c37000 - 0xc9c56fff] [ 1.195688] DMAR: Prepare 0-16MiB unity mapping for LPC [ 1.195709] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 1.195727] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.195771] iommu: Adding device 0000:00:00.0 to group 0 [ 1.195778] iommu: Adding device 0000:00:02.0 to group 1 [ 1.195784] iommu: Adding device 0000:00:04.0 to group 2 [ 1.195795] iommu: Adding device 0000:00:14.0 to group 3 [ 1.195801] iommu: Adding device 0000:00:14.2 to group 3 [ 1.195812] iommu: Adding device 0000:00:15.0 to group 4 [ 1.195818] iommu: Adding device 0000:00:15.1 to group 4 [ 1.195828] iommu: Adding device 0000:00:16.0 to group 5 [ 1.195834] iommu: Adding device 0000:00:16.3 to group 5 [ 1.195840] iommu: Adding device 0000:00:17.0 to group 6 [ 1.195857] iommu: Adding device 0000:00:1d.0 to group 7 [ 1.195872] iommu: Adding device 0000:00:1f.0 to group 8 [ 1.195883] iommu: Adding device 0000:00:1f.2 to group 8 [ 1.195890] iommu: Adding device 0000:00:1f.3 to group 8 [ 1.195896] iommu: Adding device 0000:00:1f.4 to group 8 [ 1.195902] iommu: Adding device 0000:00:1f.6 to group 8 [ 1.195915] iommu: Adding device 0000:01:00.0 to group 7 [ 1.197447] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns [ 1.197555] Scanning for low memory corruption every 60 seconds [ 1.198157] Initialise system trusted keyrings [ 1.198166] Key type blacklist registered [ 1.198231] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.199111] zbud: loaded [ 1.199406] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.199564] fuse init (API version 7.26) [ 1.202086] Key type asymmetric registered [ 1.202089] Asymmetric key parser 'x509' registered [ 1.202111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.202155] io scheduler noop registered [ 1.202156] io scheduler deadline registered [ 1.202188] io scheduler cfq registered (default) [ 1.202627] pcieport 0000:00:1d.0: AER enabled with IRQ 122 [ 1.202644] pcieport 0000:00:1d.0: Signaling PME with IRQ 122 [ 1.202701] efifb: probing for efifb [ 1.202710] efifb: framebuffer at 0xd0000000, using 22500k, total 22500k [ 1.202712] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 1.202713] efifb: scrolling: redraw [ 1.202715] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.212078] Console: switching to colour frame buffer device 400x112 [ 1.221344] fb0: EFI VGA frame buffer device [ 1.221364] intel_idle: MWAIT substates: 0x11142120 [ 1.221365] intel_idle: v0.4.1 model 0x4E [ 1.221571] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.221768] ACPI: AC Adapter [AC] (on-line) [ 1.221830] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.221868] ACPI: Sleep Button [SLPB] [ 1.221904] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.221939] ACPI: Lid Switch [LID] [ 1.221974] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.222055] ACPI: Power Button [PWRF] [ 1.229214] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.230428] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.230450] ACPI: Thermal Zone [CPUZ] (50 C) [ 1.234453] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.234475] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.238520] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.238541] ACPI: Thermal Zone [EXTZ] (39 C) [ 1.243581] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.243601] ACPI: Thermal Zone [LOCZ] (38 C) [ 1.247416] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.247437] ACPI: Thermal Zone [BATZ] (31 C) [ 1.247774] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.247793] ACPI: Thermal Zone [PCHZ] (0 C) [ 1.247997] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.250099] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 1.256669] ACPI: Battery Slot [BAT0] (battery present) [ 1.271092] 0000:00:16.3: ttyS4 at I/O 0x3080 (irq = 19, base_baud = 115200) is a 16550A [ 1.271453] Linux agpgart interface v0.103 [ 1.287717] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16) [ 1.378224] loop: module loaded [ 1.378491] libphy: Fixed MDIO Bus: probed [ 1.378523] tun: Universal TUN/TAP device driver, 1.6 [ 1.378642] PPP generic driver version 2.4.2 [ 1.378763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.378808] ehci-pci: EHCI PCI platform driver [ 1.378852] ehci-platform: EHCI generic platform driver [ 1.378899] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.378941] ohci-pci: OHCI PCI platform driver [ 1.378992] ohci-platform: OHCI generic platform driver [ 1.379035] uhci_hcd: USB Universal Host Controller Interface driver [ 1.379370] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.379415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.380634] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.380697] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.380914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.380959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.381006] usb usb1: Product: xHCI Host Controller [ 1.381040] usb usb1: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 1.381082] usb usb1: SerialNumber: 0000:00:14.0 [ 1.381306] hub 1-0:1.0: USB hub found [ 1.381354] hub 1-0:1.0: 12 ports detected [ 1.383847] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.383892] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.383987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.384063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384114] usb usb2: Product: xHCI Host Controller [ 1.384147] usb usb2: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 1.384189] usb usb2: SerialNumber: 0000:00:14.0 [ 1.384404] hub 2-0:1.0: USB hub found [ 1.384447] hub 2-0:1.0: 6 ports detected [ 1.385461] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.387101] i8042: Detected active multiplexing controller, rev 1.1 [ 1.387802] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.387841] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.387913] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.387976] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.388075] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.388331] mousedev: PS/2 mouse device common for all mice [ 1.388712] rtc_cmos 00:02: RTC can wake from S4 [ 1.389201] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.389335] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.389396] i2c /dev entries driver [ 1.389500] device-mapper: uevent: version 1.0.3 [ 1.389653] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.389710] intel_pstate: Intel P-state driver initializing [ 1.390247] intel_pstate: HWP enabled [ 1.390457] ledtrig-cpu: registered to indicate activity on CPUs [ 1.390480] EFI Variables Facility v0.08 2004-May-17 [ 1.413480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.426196] intel_pmc_core: initialized [ 1.426371] NET: Registered protocol family 10 [ 1.429989] Segment Routing with IPv6 [ 1.430021] NET: Registered protocol family 17 [ 1.430104] Key type dns_resolver registered [ 1.430459] RAS: Correctable Errors collector initialized. [ 1.430498] microcode: sig=0x406e3, pf=0x80, revision=0xc2 [ 1.430608] microcode: Microcode Update Driver: v2.2. [ 1.430615] sched_clock: Marking stable (1430605873, 0)->(1405748780, 24857093) [ 1.430963] registered taskstats version 1 [ 1.430984] Loading compiled-in X.509 certificates [ 1.434359] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208' [ 1.436414] Loaded UEFI:db cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to secondary sys keyring [ 1.437919] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.439439] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.443390] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 1.445528] zswap: loaded using pool lzo/zbud [ 1.450111] Key type big_key registered [ 1.451638] Key type trusted registered [ 1.454718] Key type encrypted registered [ 1.456271] AppArmor: AppArmor sha1 policy hashing enabled [ 1.670735] evm: HMAC attrs: 0x1 [ 1.673256] Magic number: 14:429:745 [ 1.674890] rtc_cmos 00:02: setting system clock to 2018-04-26 17:42:07 UTC (1524764527) [ 1.676492] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.677918] EDD information not available. [ 1.679335] Lockdown: Hibernation is restricted; see man kernel_lockdown.7 [ 1.682513] Freeing unused kernel memory: 2404K [ 1.683939] Write protecting the kernel read-only data: 20480k [ 1.685879] Freeing unused kernel memory: 2008K [ 1.690151] Freeing unused kernel memory: 1904K [ 1.696299] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.720032] usb 1-2: new full-speed USB device number 2 using xhci_hcd [ 1.793296] pps_core: LinuxPPS API ver. 1 registered [ 1.793784] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.796856] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.798897] hidraw: raw HID events driver (C) Jiri Kosina [ 1.830212] PTP clock support registered [ 1.832502] ahci 0000:00:17.0: version 3.0 [ 1.832810] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 1.834454] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode [ 1.836154] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 1.838259] scsi host0: ahci [ 1.838360] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.838360] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.843191] scsi host1: ahci [ 1.844833] ata1: DUMMY [ 1.846401] ata2: SATA max UDMA/133 abar m2048@0xe1157000 port 0xe1157180 irq 124 [ 1.848323] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.873505] usb 1-2: New USB device found, idVendor=138a, idProduct=003f [ 1.875079] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.876661] usb 1-2: SerialNumber: 00b00e5e729c [ 1.974987] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.004119] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 2.045227] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:e1:71:82:fc:9a [ 2.046766] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.048365] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 2.050664] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.052075] [drm] Memory usable by graphics device = 4096M [ 2.052075] [drm] VT-d active for gfx access [ 2.052077] checking generic (d0000000 15f9000) vs hw (d0000000 10000000) [ 2.052078] fb: switching to inteldrmfb from EFI VGA [ 2.056820] Console: switching to colour dummy device 80x25 [ 2.056933] [drm] Replacing VGA console driver [ 2.062253] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.062256] [drm] Driver supports precise vblank timestamp query. [ 2.064126] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.064466] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [ 2.065057] [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled [ 2.074461] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.076662] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.077257] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 2.128207] fbcon: inteldrmfb (fb0) is primary device [ 2.168232] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.169940] ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 2.171094] ata2.00: ATA-10: SAMSUNG MZNLN512HMJP-000H1, MAV21H3Q, max UDMA/100 [ 2.171096] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.172322] ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 2.173921] ata2.00: configured for UDMA/100 [ 2.174288] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZNLN512 1H3Q PQ: 0 ANSI: 5 [ 2.174790] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.175090] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 2.175091] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 2.175128] sd 1:0:0:0: [sda] Write Protect is off [ 2.175129] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.175243] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.177379] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 2.178270] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.191034] usb 1-3: New USB device found, idVendor=05c8, idProduct=0386 [ 2.191035] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.191036] usb 1-3: Product: HP HD Camera [ 2.191037] usb 1-3: Manufacturer: Generic [ 2.191038] usb 1-3: SerialNumber: 200901010001 [ 2.204540] clocksource: Switched to clocksource tsc [ 2.320210] usb 1-5: new low-speed USB device number 4 using xhci_hcd [ 2.472701] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 2.472702] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.472703] usb 1-5: Product: USB Optical Mouse [ 2.472704] usb 1-5: Manufacturer: Logitech [ 2.600205] usb 1-9: new full-speed USB device number 5 using xhci_hcd [ 2.750077] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2b [ 2.750079] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.755970] usbcore: registered new interface driver usbhid [ 2.755971] usbhid: USB HID core driver [ 2.818780] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input10 [ 3.475439] Console: switching to colour frame buffer device 400x112 [ 3.509561] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.692003] raid6: sse2x1 gen() 10527 MB/s [ 3.740005] raid6: sse2x1 xor() 7928 MB/s [ 3.788007] raid6: sse2x2 gen() 12603 MB/s [ 3.804299] [drm] RC6 on [ 3.836003] raid6: sse2x2 xor() 9085 MB/s [ 3.884006] raid6: sse2x4 gen() 14419 MB/s [ 3.932028] raid6: sse2x4 xor() 9284 MB/s [ 3.980021] raid6: avx2x1 gen() 21083 MB/s [ 4.028003] raid6: avx2x1 xor() 15124 MB/s [ 4.076005] raid6: avx2x2 gen() 24617 MB/s [ 4.124003] raid6: avx2x2 xor() 16605 MB/s [ 4.172004] raid6: avx2x4 gen() 28730 MB/s [ 4.220003] raid6: avx2x4 xor() 17477 MB/s [ 4.220036] raid6: using algorithm avx2x4 gen() 28730 MB/s [ 4.220068] raid6: .... xor() 17477 MB/s, rmw enabled [ 4.220085] raid6: using avx2x2 recovery algorithm [ 4.222367] xor: automatically using best checksumming function avx [ 4.233942] Btrfs loaded, crc32c=crc32c-intel [ 4.290690] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 4.397634] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.470896] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.488500] systemd[1]: Detected architecture x86-64. [ 4.492029] systemd[1]: Set hostname to . [ 4.492737] Lockdown: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 4.573782] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.573949] systemd[1]: Reached target Libvirt guests shutdown. [ 4.574052] systemd[1]: Reached target User and Group Name Lookups. [ 4.574797] systemd[1]: Created slice User and Session Slice. [ 4.575084] systemd[1]: Created slice Virtual Machine and Container Slice. [ 4.575386] systemd[1]: Created slice System Slice. [ 4.575532] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.696608] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 4.701721] lp: driver loaded but no devices found [ 4.709308] RPC: Registered named UNIX socket transport module. [ 4.709308] RPC: Registered udp transport module. [ 4.709309] RPC: Registered tcp transport module. [ 4.709309] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.715202] ppdev: user-space parallel port driver [ 4.725438] Loading iSCSI transport class v2.0-870. [ 4.732011] iscsi: registered transport (tcp) [ 4.760769] iscsi: registered transport (iser) [ 4.927006] systemd-journald[353]: Received request to flush runtime journal from PID 1 [ 4.964647] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 5.034477] input: HP Wireless hotkeys as /devices/virtual/input/input13 [ 5.054659] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 5.112707] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 5.139974] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 5.143979] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 5.146986] i2c_hid i2c-ATML1000:00: i2c-ATML1000:00 supply vdd not found, using dummy regulator [ 5.162975] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 5.163297] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 5.166879] i2c_hid i2c-ALP000E:00: i2c-ALP000E:00 supply vdd not found, using dummy regulator [ 5.177791] random: crng init done [ 5.182751] Bluetooth: Core ver 2.22 [ 5.182764] NET: Registered protocol family 31 [ 5.182765] Bluetooth: HCI device and connection manager initialized [ 5.182767] Bluetooth: HCI socket layer initialized [ 5.182769] Bluetooth: L2CAP socket layer initialized [ 5.182774] Bluetooth: SCO socket layer initialized [ 5.183944] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.195400] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.196401] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000aeaa5c27 (20170831/exresop-593) [ 5.198273] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20170831/dswexec-461) [ 5.200208] Initialized Local Variables for Method [WVPO]: [ 5.200209] Local1: 000000002649ce75 Buffer(12) 00 00 00 00 00 00 00 00 [ 5.200217] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 5.200218] Arg0: 00000000f571ff6b Integer 0000000000000004 [ 5.200221] Arg1: 00000000aeaa5c27 Integer 0000000000000000 [ 5.200226] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 5.205741] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 5.209176] media: Linux media interface: v0.10 [ 5.215658] ACPI Error: Needed [Buffer/String/Package], found [Integer] 0000000063555836 (20170831/exresop-593) [ 5.218091] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20170831/dswexec-461) [ 5.220172] Initialized Local Variables for Method [WVPO]: [ 5.220173] Local1: 00000000470d6571 Buffer(12) 00 00 00 00 00 00 00 00 [ 5.220181] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 5.220181] Arg0: 00000000a5dd5225 Integer 0000000000000004 [ 5.220184] Arg1: 0000000063555836 Integer 0000000000000000 [ 5.220191] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 5.222129] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 5.226693] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0001/input/input15 [ 5.226781] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 5.231264] ACPI Error: Needed [Buffer/String/Package], found [Integer] 00000000d1cf72af (20170831/exresop-593) [ 5.234019] usbcore: registered new interface driver btusb [ 5.234166] Linux video capture interface: v2.00 [ 5.237934] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20170831/dswexec-461) [ 5.242562] Initialized Local Variables for Method [WVPO]: [ 5.242564] Local1: 00000000cd4d95be Buffer(12) 00 00 00 00 00 00 00 00 [ 5.242574] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 5.242575] Arg0: 00000000d1a383ca Integer 0000000000000004 [ 5.242579] Arg1: 00000000d1cf72af Integer 0000000000000000 [ 5.242587] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 5.243233] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 5.246235] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.247439] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170831/psparse-550) [ 5.249414] Bluetooth: hci0: Device revision is 5 [ 5.249415] Bluetooth: hci0: Secure boot is enabled [ 5.249416] Bluetooth: hci0: OTP lock is enabled [ 5.249416] Bluetooth: hci0: API lock is enabled [ 5.249417] Bluetooth: hci0: Debug lock is disabled [ 5.249420] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.251921] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 5.253547] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 5.253958] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.254559] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.254561] cfg80211: failed to load regulatory.db [ 5.264611] ACPI Error: Attempt to CreateField of length zero (20170831/dsopcode-168) [ 5.268517] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 5.268519] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.268519] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.268520] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.268521] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.268521] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 5.269817] Initialized Local Variables for Method [WVPI]: [ 5.269818] Local0: 000000009d2d448d Integer 0000000000000080 [ 5.269824] Local1: 0000000010fede7a Package 0000000010fede7a [ 5.269830] Initialized Arguments for Method [WVPI]: (3 arguments defined for method invocation) [ 5.269830] Arg0: 00000000ca31bea9 Integer 0000000000000000 [ 5.269834] Arg1: 00000000fdbe1b4b Integer 0000000000000003 [ 5.269838] Arg2: 0000000018669f7d Buffer(20) 53 45 43 55 01 00 00 00 [ 5.269850] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20170831/psparse-550) [ 5.273077] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20170831/psparse-550) [ 5.281186] uvcvideo: Found UVC 1.00 device HP HD Camera (05c8:0386) [ 5.283982] Intel(R) Wireless WiFi driver for Linux [ 5.283983] Copyright(c) 2003- 2015 Intel Corporation [ 5.284850] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 5.286231] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized! [ 5.286233] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized! [ 5.286234] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized! [ 5.286401] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input16 [ 5.287168] usbcore: registered new interface driver uvcvideo [ 5.287169] USB Video Class driver (1.1.1) [ 5.294330] iwlwifi 0000:01:00.0: loaded firmware version 34.0.1 op_mode iwlmvm [ 5.315959] AVX2 version of gcm_enc/dec engaged. [ 5.315961] AES CTR mode by8 optimization enabled [ 5.324917] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 5.386960] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.387186] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.423005] iwlwifi 0000:01:00.0: base HW address: 34:f3:9a:53:53:0e [ 5.437498] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing. [ 5.438055] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.438057] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.438059] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 5.438060] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 5.438061] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 5.438062] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 5.438064] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 5.439096] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 5.459113] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 5.459240] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 5.459288] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 5.459341] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 5.459404] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 5.459464] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 5.459512] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 5.473123] intel_rapl: Found RAPL domain package [ 5.473125] intel_rapl: Found RAPL domain core [ 5.473126] intel_rapl: Found RAPL domain uncore [ 5.473127] intel_rapl: Found RAPL domain dram [ 5.517143] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.517437] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 5.517453] thermal thermal_zone13: failed to read out thermal zone (-61) [ 5.543725] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input24 [ 5.543830] hid-alps 0018:044E:120C.0003: input,hidraw1: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 5.548413] input: ATML1000:00 03EB:8A76 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ATML1000:00/0018:03EB:8A76.0002/input/input26 [ 5.549174] hid-multitouch 0018:03EB:8A76.0002: input,hidraw2: I2C HID v1.00 Device [ATML1000:00 03EB:8A76] on i2c-ATML1000:00 [ 5.635441] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 6.015488] audit: type=1400 audit(1524764531.833:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=976 comm="apparmor_parser" [ 6.015492] audit: type=1400 audit(1524764531.833:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=976 comm="apparmor_parser" [ 6.015494] audit: type=1400 audit(1524764531.833:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=976 comm="apparmor_parser" [ 6.019400] audit: type=1400 audit(1524764531.837:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=961 comm="apparmor_parser" [ 6.019404] audit: type=1400 audit(1524764531.837:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=961 comm="apparmor_parser" [ 6.024565] audit: type=1400 audit(1524764531.845:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1003 comm="apparmor_parser" [ 6.024859] audit: type=1400 audit(1524764531.845:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1005 comm="apparmor_parser" [ 6.024863] audit: type=1400 audit(1524764531.845:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=1005 comm="apparmor_parser" [ 6.026898] audit: type=1400 audit(1524764531.845:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=960 comm="apparmor_parser" [ 6.026901] audit: type=1400 audit(1524764531.845:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=960 comm="apparmor_parser" [ 6.722616] Bluetooth: hci0: Waiting for firmware download to complete [ 6.723219] Bluetooth: hci0: Firmware loaded in 1448400 usecs [ 6.723260] Bluetooth: hci0: Waiting for device to boot [ 6.734263] Bluetooth: hci0: Device booted in 10754 usecs [ 6.817674] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 6.821247] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.899178] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.899180] Bluetooth: BNEP filters: protocol multicast [ 6.899182] Bluetooth: BNEP socket layer initialized [ 8.000364] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 8.216283] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 8.243278] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 8.490546] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 8.575818] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 14.710507] kauditd_printk_skb: 230 callbacks suppressed [ 14.710508] audit: type=1400 audit(1524764540.529:242): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2787 comm="apparmor_parser" [ 14.843902] Lockdown: ioperm is restricted; see man kernel_lockdown.7 [ 15.191964] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 15.256080] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 15.258965] Bridge firewalling registered [ 15.282168] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 15.285488] Ebtables v2.0 registered [ 15.606105] Initializing XFRM netlink socket [ 15.616604] Netfilter messages via NETLINK v0.30. [ 15.619304] ctnetlink v0.93: registering with nfnetlink. [ 15.811998] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 16.256822] virbr0: port 1(virbr0-nic) entered blocking state [ 16.256824] virbr0: port 1(virbr0-nic) entered disabled state [ 16.256921] device virbr0-nic entered promiscuous mode [ 16.571147] virbr0: port 1(virbr0-nic) entered blocking state [ 16.571149] virbr0: port 1(virbr0-nic) entered listening state [ 16.651963] virbr0: port 1(virbr0-nic) entered disabled state [ 30.982519] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 33.325508] Bluetooth: RFCOMM TTY layer initialized [ 33.325517] Bluetooth: RFCOMM socket layer initialized [ 33.325522] Bluetooth: RFCOMM ver 1.11 [ 33.939031] audit: type=1400 audit(1524764559.757:243): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=3753 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 33.951429] audit: type=1400 audit(1524764559.769:244): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=3753 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 33.976302] audit: type=1400 audit(1524764559.797:245): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=3754 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 58.470603] wlp1s0: authenticate with 00:18:e7:ea:cc:bb [ 58.481880] wlp1s0: send auth to 00:18:e7:ea:cc:bb (try 1/3) [ 58.485682] wlp1s0: authenticated [ 58.488221] wlp1s0: associate with 00:18:e7:ea:cc:bb (try 1/3) [ 58.491535] wlp1s0: RX AssocResp from 00:18:e7:ea:cc:bb (capab=0x431 status=0 aid=1) [ 58.496076] wlp1s0: associated [ 58.575135] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 123.346172] Chrome_~dThread[4327]: segfault at 0 ip 00007f73684576fd sp 00007f73667dab00 error 6 in libxul.so[7f73676a0000+6102000] [ 123.346626] Chrome_~dThread[4542]: segfault at 0 ip 00007f2b44b576fd sp 00007f2b42edab00 error 6 in libxul.so[7f2b43da0000+6102000] [ 468.062329] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 468.085709] JFS: nTxBlock = 8192, nTxLock = 65536 [ 468.096397] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 468.114528] QNX4 filesystem 0.2.3 registered. [ 565.107707] usb 1-5: USB disconnect, device number 4 [ 990.305821] psmouse: unknown parameter 'synaptics_i2c' ignored [ 991.337245] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input31 [ 1056.439176] Chrome_~dThread[4965]: segfault at 0 ip 00007fd425a576fd sp 00007fd423ddab00 error 6 in libxul.so[7fd424ca0000+6102000] [ 1056.452211] Chrome_~dThread[5022]: segfault at 0 ip 00007fcf3a4576fd sp 00007fcf387dab00 error 6 in libxul.so[7fcf396a0000+6102000] [ 1057.122312] wlp1s0: deauthenticating from 00:18:e7:ea:cc:bb by local choice (Reason: 3=DEAUTH_LEAVING) [ 1057.135307] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 1057.135337] wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 1070.535654] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 1115.797324] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input36 [ 1125.636059] audit: type=1400 audit(1524765651.434:246): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=8474 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1125.637565] audit: type=1400 audit(1524765651.434:247): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=8474 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1125.664221] audit: type=1400 audit(1524765651.462:248): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=8475 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1132.520588] wlp1s0: authenticate with 00:18:e7:ea:cc:bb [ 1132.528121] wlp1s0: send auth to 00:18:e7:ea:cc:bb (try 1/3) [ 1132.531606] wlp1s0: authenticated [ 1132.534892] wlp1s0: associate with 00:18:e7:ea:cc:bb (try 1/3) [ 1132.538289] wlp1s0: RX AssocResp from 00:18:e7:ea:cc:bb (capab=0x431 status=0 aid=1) [ 1132.540148] wlp1s0: associated [ 1132.549744] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 1399.756785] audit: type=1400 audit(1524765925.556:249): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=12696 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1399.764906] audit: type=1400 audit(1524765925.564:250): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=12696 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1399.800361] audit: type=1400 audit(1524765925.600:251): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=12697 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 1449.255642] usbcore: registered new interface driver synaptics_usb [ 1465.732092] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input41 [ 1614.588359] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input44 [ 1614.589211] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 1703.916325] Chrome_~dThread[13194]: segfault at 0 ip 00007f511a1576fd sp 00007f51184dab00 error 6 in libxul.so[7f51193a0000+6102000] [ 1703.917091] Chrome_~dThread[18414]: segfault at 0 ip 00007f1466c576fd sp 00007f1464fdab00 error 6 in libxul.so[7f1465ea0000+6102000] [ 1794.063585] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input47 [ 2181.455969] usb 1-5: new low-speed USB device number 6 using xhci_hcd [ 2181.608734] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 2181.608742] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2181.608748] usb 1-5: Product: USB Optical Mouse [ 2181.608752] usb 1-5: Manufacturer: Logitech [ 2181.640942] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0004/input/input49 [ 2181.641434] hid-generic 0003:046D:C05A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 2232.455893] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input51 [ 2232.456654] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 2571.911809] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input54 [ 2600.044459] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input59 [ 3218.813805] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input62 [ 3218.815044] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3221.864920] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input65 [ 3254.090140] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input68 [ 3254.090822] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3344.775102] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input71 [ 3373.683847] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input76 [ 3376.874360] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input78 [ 3376.876171] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3527.811313] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input82 [ 3534.978724] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input85 [ 3534.980043] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3577.996848] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input86 [ 3577.997511] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3587.286817] usb 1-5: USB disconnect, device number 6 [ 3622.843742] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input87 [ 3622.844384] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3733.482297] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input88 [ 3733.482988] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00 [ 3782.718995] usb 1-5: new low-speed USB device number 7 using xhci_hcd [ 3782.872217] usb 1-5: New USB device found, idVendor=046d, idProduct=c05a [ 3782.872225] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3782.872230] usb 1-5: Product: USB Optical Mouse [ 3782.872235] usb 1-5: Manufacturer: Logitech [ 3782.897960] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0005/input/input89 [ 3782.898351] hid-generic 0003:046D:C05A.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0 [ 3995.316983] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio3/input/input92 [ 4008.857993] input: ALP000E:00 044E:120C as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ALP000E:00/0018:044E:120C.0003/input/input95 [ 4008.859283] hid-alps 0018:044E:120C.0003: input,hidraw0: I2C HID v1.00 Mouse [ALP000E:00 044E:120C] on i2c-ALP000E:00