[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4ef with crng_init=0 [ 0.000000] Linux version 4.13.0-38-generic (root@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #43~lp1764194 SMP Mon Apr 16 20:02:44 UTC 2018 (Ubuntu 4.13.0-38.43~lp1764194-generic 4.13.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=/dev/mapper/ubuntu--mate--vg-root ro drm.debug=0xe [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8b4bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8b4c000-0x00000000b8b4cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b8b4d000-0x00000000b8b4dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8b4e000-0x00000000c8d41fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8d42000-0x00000000ca4ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ca4ec000-0x00000000ca532fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ca533000-0x00000000cae94fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cae95000-0x00000000cb51bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb51c000-0x00000000cb5fefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000cb5ff000-0x00000000cb5fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb600000-0x00000000cf7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xca4fb000 ACPI 2.0=0xca4fb000 SMBIOS=0xcb26d000 SMBIOS 3.0=0xcb26c000 ESRT=0xcb23e018 MPS=0xfcd20 MEMATTR=0xc6396018 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x82e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xcb600 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcf70-0x000fcf7f] mapped at [ffff950dc00fcf70] [ 0.000000] esrt: Reserving ESRT space from 0x00000000cb23e018 to 0x00000000cb23e050. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff950dc0096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x6ded2e000, 0x6ded2efff] PGTABLE [ 0.000000] BRK [0x6ded2f000, 0x6ded2ffff] PGTABLE [ 0.000000] BRK [0x6ded30000, 0x6ded30fff] PGTABLE [ 0.000000] BRK [0x6ded31000, 0x6ded31fff] PGTABLE [ 0.000000] BRK [0x6ded32000, 0x6ded32fff] PGTABLE [ 0.000000] BRK [0x6ded33000, 0x6ded33fff] PGTABLE [ 0.000000] BRK [0x6ded34000, 0x6ded34fff] PGTABLE [ 0.000000] BRK [0x6ded35000, 0x6ded35fff] PGTABLE [ 0.000000] BRK [0x6ded36000, 0x6ded36fff] PGTABLE [ 0.000000] BRK [0x6ded37000, 0x6ded37fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x31c8f000-0x34e3efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000CA4FB000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000CA4FB0C0 000104 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CA522EF0 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000CA4FB258 027C92 (v02 DELL CBX3 01072009 INTL 20160422) [ 0.000000] ACPI: FACS 0x00000000CAE92180 000040 [ 0.000000] ACPI: APIC 0x00000000CA523000 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000CA5230C0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000CA523108 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000CA5231B8 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000CA5231F8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000CA523230 000559 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA523790 0012E0 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: HPET 0x00000000CA524A70 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000CA524AA8 0007F1 (v02 INTEL xh_OEMBD 00000000 INTL 20160422) [ 0.000000] ACPI: UEFI 0x00000000CA5252A0 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000CA5252E8 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: LPIT 0x00000000CA526A98 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000CA526B30 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA526C98 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA526F38 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA529F40 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.000000] ACPI: DBGP 0x00000000CA52A458 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000CA52A490 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000CA52A4E8 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x00000000CA52AC98 006B0D (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.000000] ACPI: MSDM 0x00000000CA5317A8 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SLIC 0x00000000CA531800 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: NHLT 0x00000000CA531978 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: TPM2 0x00000000CA5319A8 000034 (v03 DELL CBX3 00000001 AMI 00000000) [ 0.000000] ACPI: ASF! 0x00000000CA5319E0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: DMAR 0x00000000CA531A80 0000F0 (v01 INTEL EDK2 00000001 INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000CA531B70 000038 (v00 \xf3\xee 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000082e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x82e7d5000-0x82e7fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000082e7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b8b4bfff] [ 0.000000] node 0: [mem 0x00000000b8b4e000-0x00000000c8d41fff] [ 0.000000] node 0: [mem 0x00000000cb5ff000-0x00000000cb5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000082e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000082e7fffff] [ 0.000000] On node 0 totalpages: 8352990 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12790 pages used for memmap [ 0.000000] DMA32 zone: 818497 pages, LIFO batch:31 [ 0.000000] Normal zone: 117664 pages used for memmap [ 0.000000] Normal zone: 7530496 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000cd800000-0x00000000cf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8b4c000-0xb8b4cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8b4d000-0xb8b4dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8d42000-0xca4ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0xca4ec000-0xca532fff] [ 0.000000] PM: Registered nosave memory: [mem 0xca533000-0xcae94fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcae95000-0xcb51bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb51c000-0xcb5fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb600000-0xcf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf800000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff9515ee400000 s146520 r8192 d29608 u262144 [ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8222446 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=/dev/mapper/ubuntu--mate--vg-root ro drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 32695592K/33411960K available (12300K kernel code, 2482K rwdata, 4020K rodata, 2376K init, 2372K bss, 716368K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37838 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Detected 2100.000 MHz processor [ 0.004000] tsc: Detected 2112.000 MHz TSC [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.050833] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.051857] Security Framework initialized [ 0.051862] Yama: becoming mindful. [ 0.051885] AppArmor: AppArmor initialized [ 0.056884] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.059306] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.059390] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.059477] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.059681] CPU: Physical Processor ID: 0 [ 0.059685] CPU: Processor Core ID: 0 [ 0.059693] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.059696] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.059701] FEATURE SPEC_CTRL Present [ 0.059706] mce: CPU supports 10 MCE banks [ 0.059719] CPU0: Thermal monitoring enabled (TM1) [ 0.059745] process: using mwait in idle threads [ 0.059750] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.059753] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.059757] Spectre V2 mitigation: Mitigation: Full generic retpoline [ 0.059760] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported [ 0.059761] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled [ 0.059765] Spectre V2 mitigation: Filling RSB on context switch [ 0.060464] Freeing SMP alternatives memory: 36K [ 0.063741] smpboot: Max logical packages: 2 [ 0.063750] DMAR: Host address width 39 [ 0.063754] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.063765] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.063772] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.063781] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.063788] DMAR: RMRR base: 0x000000ca217000 end: 0x000000ca236fff [ 0.063792] DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf7fffff [ 0.063796] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.063799] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.063803] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.063807] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.063810] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.065364] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.065368] x2apic enabled [ 0.065384] Switched APIC routing to cluster x2apic. [ 0.069485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.109206] TSC deadline timer enabled [ 0.109211] smpboot: CPU0: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.109295] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.109337] ... version: 4 [ 0.109341] ... bit width: 48 [ 0.109344] ... generic registers: 4 [ 0.109347] ... value mask: 0000ffffffffffff [ 0.109350] ... max period: 00007fffffffffff [ 0.109353] ... fixed-purpose events: 3 [ 0.109356] ... event mask: 000000070000000f [ 0.109401] Hierarchical SRCU implementation. [ 0.110511] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.110530] smp: Bringing up secondary CPUs ... [ 0.110609] x86: Booting SMP configuration: [ 0.110613] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.112688] smp: Brought up 1 node, 8 CPUs [ 0.112688] smpboot: Total of 8 processors activated (33792.00 BogoMIPS) [ 0.116804] devtmpfs: initialized [ 0.116804] x86/mm: Memory block size: 128MB [ 0.118623] evm: security.selinux [ 0.118627] evm: security.SMACK64 [ 0.118630] evm: security.SMACK64EXEC [ 0.118633] evm: security.SMACK64TRANSMUTE [ 0.118636] evm: security.SMACK64MMAP [ 0.118639] evm: security.ima [ 0.118642] evm: security.capability [ 0.118659] PM: Registering ACPI NVS region [mem 0xb8b4c000-0xb8b4cfff] (4096 bytes) [ 0.118659] PM: Registering ACPI NVS region [mem 0xca533000-0xcae94fff] (9838592 bytes) [ 0.118659] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.118659] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.118659] pinctrl core: initialized pinctrl subsystem [ 0.120006] RTC time: 0:46:28, date: 04/17/18 [ 0.120095] NET: Registered protocol family 16 [ 0.120294] cpuidle: using governor ladder [ 0.120294] cpuidle: using governor menu [ 0.120294] PCCT header not found. [ 0.120294] ACPI: bus type PCI registered [ 0.120294] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.120294] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.120294] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.120294] PCI: Using configuration type 1 for base access [ 0.121680] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.121680] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.121680] ACPI: Added _OSI(Module Device) [ 0.121680] ACPI: Added _OSI(Processor Device) [ 0.121680] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.121680] ACPI: Added _OSI(Processor Aggregator Device) [ 0.125616] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload2-191) [ 0.125627] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252) [ 0.125634] ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170531/psparse-550) [ 0.126027] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload2-191) [ 0.126037] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252) [ 0.126044] ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170531/psparse-550) [ 0.127506] ACPI: Executed 48 blocks of module-level executable AML code [ 0.141056] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.151432] ACPI: Dynamic OEM Table Load: [ 0.151432] ACPI: SSDT 0xFFFF9515C9E9D000 0005EE (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.151432] ACPI: Executed 1 blocks of module-level executable AML code [ 0.151432] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.151432] ACPI: Dynamic OEM Table Load: [ 0.151432] ACPI: SSDT 0xFFFF9515C98A6400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.151432] ACPI: Executed 1 blocks of module-level executable AML code [ 0.151432] ACPI: Dynamic OEM Table Load: [ 0.151432] ACPI: SSDT 0xFFFF9515C98BA180 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.151525] ACPI: Executed 1 blocks of module-level executable AML code [ 0.151673] ACPI: Dynamic OEM Table Load: [ 0.151682] ACPI: SSDT 0xFFFF9515C9E9B800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.151891] ACPI: Executed 1 blocks of module-level executable AML code [ 0.152469] ACPI: Dynamic OEM Table Load: [ 0.152481] ACPI: SSDT 0xFFFF9515C98A9000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.153328] ACPI: Executed 1 blocks of module-level executable AML code [ 0.153545] ACPI: Dynamic OEM Table Load: [ 0.153555] ACPI: SSDT 0xFFFF9515C98A2400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.153834] ACPI: Executed 1 blocks of module-level executable AML code [ 0.154064] ACPI: Dynamic OEM Table Load: [ 0.154074] ACPI: SSDT 0xFFFF9515C98A7000 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.154353] ACPI: Executed 1 blocks of module-level executable AML code [ 0.157484] ACPI: EC: EC started [ 0.157489] ACPI: EC: interrupt blocked [ 0.170855] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.170861] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.170866] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions [ 0.170871] ACPI: Interpreter enabled [ 0.170931] ACPI: (supports S0 S3 S4 S5) [ 0.170935] ACPI: Using IOAPIC for interrupt routing [ 0.170984] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.171694] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.217088] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.217099] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 0.217168] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.217177] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 0.217976] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.217986] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.221171] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.222096] PCI host bridge to bus 0000:00 [ 0.222103] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.222108] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.222113] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.222121] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xefffffff window] [ 0.222126] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.222133] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.222147] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.222294] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.222307] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit] [ 0.222314] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.222319] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.222491] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.222505] pci 0000:00:04.0: reg 0x10: [mem 0xef240000-0xef247fff 64bit] [ 0.222736] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.222763] pci 0000:00:14.0: reg 0x10: [mem 0xef230000-0xef23ffff 64bit] [ 0.222839] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.223077] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.223099] pci 0000:00:14.2: reg 0x10: [mem 0xef258000-0xef258fff 64bit] [ 0.223357] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.223596] pci 0000:00:15.0: reg 0x10: [mem 0xef257000-0xef257fff 64bit] [ 0.224520] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.224772] pci 0000:00:15.1: reg 0x10: [mem 0xef256000-0xef256fff 64bit] [ 0.225684] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.225706] pci 0000:00:16.0: reg 0x10: [mem 0xef255000-0xef255fff 64bit] [ 0.225780] pci 0000:00:16.0: PME# supported from D3hot [ 0.225957] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.225977] pci 0000:00:17.0: reg 0x10: [mem 0xef250000-0xef251fff] [ 0.225987] pci 0000:00:17.0: reg 0x14: [mem 0xef254000-0xef2540ff] [ 0.225995] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.226003] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.226011] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.226020] pci 0000:00:17.0: reg 0x24: [mem 0xef253000-0xef2537ff] [ 0.226064] pci 0000:00:17.0: PME# supported from D3hot [ 0.226229] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.226309] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.226501] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 [ 0.226583] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.226791] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.227014] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.227034] pci 0000:00:1f.2: reg 0x10: [mem 0xef24c000-0xef24ffff] [ 0.227234] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 0.227265] pci 0000:00:1f.3: reg 0x10: [mem 0xef248000-0xef24bfff 64bit] [ 0.227303] pci 0000:00:1f.3: reg 0x20: [mem 0xef220000-0xef22ffff 64bit] [ 0.227358] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.227618] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.227682] pci 0000:00:1f.4: reg 0x10: [mem 0xef252000-0xef2520ff 64bit] [ 0.227756] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.227976] pci 0000:00:1f.6: [8086:15d7] type 00 class 0x020000 [ 0.228007] pci 0000:00:1f.6: reg 0x10: [mem 0xef200000-0xef21ffff] [ 0.228114] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.228456] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.228494] pci 0000:01:00.0: reg 0x14: [mem 0xef100000-0xef100fff] [ 0.228610] pci 0000:01:00.0: supports D1 D2 [ 0.228612] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.240131] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.240141] pci 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff] [ 0.240915] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000 [ 0.241015] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit] [ 0.241528] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.252376] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.252387] pci 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff] [ 0.257835] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.257907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.257975] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258043] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258176] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258244] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.258311] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264254] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.264266] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 0.264468] ACPI: EC: interrupt unblocked [ 0.264483] ACPI: EC: event unblocked [ 0.264513] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.264519] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events [ 0.264951] SCSI subsystem initialized [ 0.264970] libata version 3.00 loaded. [ 0.264970] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.264970] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.264970] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.264970] vgaarb: loaded [ 0.264970] ACPI: bus type USB registered [ 0.264970] usbcore: registered new interface driver usbfs [ 0.264970] usbcore: registered new interface driver hub [ 0.264970] usbcore: registered new device driver usb [ 0.264970] EDAC MC: Ver: 3.0.0 [ 0.264970] Registered efivars operations [ 0.269717] PCI: Using ACPI for IRQ routing [ 0.286305] PCI: pci_cache_line_size set to 64 bytes [ 0.287100] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.287101] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.287102] e820: reserve RAM buffer [mem 0xb8b4c000-0xbbffffff] [ 0.287104] e820: reserve RAM buffer [mem 0xc8d42000-0xcbffffff] [ 0.287105] e820: reserve RAM buffer [mem 0xcb600000-0xcbffffff] [ 0.287106] e820: reserve RAM buffer [mem 0x82e800000-0x82fffffff] [ 0.287192] NetLabel: Initializing [ 0.287197] NetLabel: domain hash size = 128 [ 0.287200] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.287217] NetLabel: unlabeled traffic allowed by default [ 0.287234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.287234] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.289038] clocksource: Switched to clocksource hpet [ 0.298782] VFS: Disk quotas dquot_6.6.0 [ 0.298804] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.298901] AppArmor: AppArmor Filesystem Enabled [ 0.298937] pnp: PnP ACPI init [ 0.299219] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.299225] system 00:00: [io 0xffff] has been reserved [ 0.299230] system 00:00: [io 0xffff] has been reserved [ 0.299234] system 00:00: [io 0xffff] has been reserved [ 0.299238] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.299243] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.299249] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.299374] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.299412] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.299418] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.299525] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.299770] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.299775] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.299780] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.299784] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.299789] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.299793] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.299798] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.299802] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.299807] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.299812] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.299817] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.299860] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.299866] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.299870] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.299875] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.299879] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.299884] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.299888] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.299893] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300282] system 00:06: [io 0xff00-0xfffe] has been reserved [ 0.300288] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301685] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.301690] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.301695] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.301699] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.301704] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.301709] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.340443] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.340454] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 0.340520] pnp: PnP ACPI: found 8 devices [ 0.348846] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.348878] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.348890] pci 0000:00:1c.0: bridge window [mem 0xef100000-0xef1fffff] [ 0.348902] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.348911] pci 0000:00:1c.2: bridge window [mem 0xef000000-0xef0fffff] [ 0.348924] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.348926] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.348928] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.348930] pci_bus 0000:00: resource 7 [mem 0xcf800000-0xefffffff window] [ 0.348931] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.348933] pci_bus 0000:01: resource 1 [mem 0xef100000-0xef1fffff] [ 0.348935] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff] [ 0.349092] NET: Registered protocol family 2 [ 0.349311] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.349696] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.349818] TCP: Hash tables configured (established 262144 bind 65536) [ 0.349870] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.349963] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.350087] NET: Registered protocol family 1 [ 0.350105] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.351780] PCI: CLS 0 bytes, default 64 [ 0.351816] Unpacking initramfs... [ 1.290566] Freeing initrd memory: 50880K [ 1.290607] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0 [ 1.290613] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.1 [ 1.290633] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.290639] software IO TLB [mem 0xc0f6e000-0xc4f6e000] (64MB) mapped at [ffff950e80f6e000-ffff950e84f6dfff] [ 1.290962] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns [ 1.291265] Scanning for low memory corruption every 60 seconds [ 1.291677] audit: initializing netlink subsys (disabled) [ 1.291780] audit: type=2000 audit(1523925989.291:1): state=initialized audit_enabled=0 res=1 [ 1.292231] Initialise system trusted keyrings [ 1.292245] Key type blacklist registered [ 1.292329] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.293540] zbud: loaded [ 1.294113] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.294309] fuse init (API version 7.26) [ 1.297957] Key type asymmetric registered [ 1.297962] Asymmetric key parser 'x509' registered [ 1.298005] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.298082] io scheduler noop registered [ 1.298086] io scheduler deadline registered [ 1.298116] io scheduler cfq registered (default) [ 1.298947] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 1.298984] pcieport 0000:00:1c.2: AER enabled with IRQ 123 [ 1.299003] pcieport 0000:00:1c.0: Signaling PME with IRQ 122 [ 1.299020] pcieport 0000:00:1c.2: Signaling PME with IRQ 123 [ 1.299122] efifb: probing for efifb [ 1.299136] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k [ 1.299140] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.299144] efifb: scrolling: redraw [ 1.299148] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.303710] Console: switching to colour frame buffer device 240x67 [ 1.308183] fb0: EFI VGA frame buffer device [ 1.308207] intel_idle: MWAIT substates: 0x11142120 [ 1.308208] intel_idle: v0.4.1 model 0x8E [ 1.308737] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.316433] ACPI: AC Adapter [AC] (on-line) [ 1.324472] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.332608] ACPI: Lid Switch [LID0] [ 1.332672] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.332763] ACPI: Power Button [PBTN] [ 1.332812] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.332859] ACPI: Sleep Button [SBTN] [ 1.332908] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.333090] ACPI: Power Button [PWRF] [ 1.335784] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.337007] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.337039] ACPI: Thermal Zone [THM] (25 C) [ 1.337117] GHES: HEST is not enabled! [ 1.337268] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.348933] Linux agpgart interface v0.103 [ 1.396259] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1) [ 1.652536] ACPI: Battery Slot [BAT0] (battery present) [ 1.720653] loop: module loaded [ 1.720863] libphy: Fixed MDIO Bus: probed [ 1.720883] tun: Universal TUN/TAP device driver, 1.6 [ 1.720999] PPP generic driver version 2.4.2 [ 1.721123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.721152] ehci-pci: EHCI PCI platform driver [ 1.721182] ehci-platform: EHCI generic platform driver [ 1.721215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.721245] ohci-pci: OHCI PCI platform driver [ 1.721273] ohci-platform: OHCI generic platform driver [ 1.721301] uhci_hcd: USB Universal Host Controller Interface driver [ 1.721528] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.721559] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.722701] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.722743] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.722854] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.722883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.722912] usb usb1: Product: xHCI Host Controller [ 1.722934] usb usb1: Manufacturer: Linux 4.13.0-38-generic xhci-hcd [ 1.722960] usb usb1: SerialNumber: 0000:00:14.0 [ 1.723167] hub 1-0:1.0: USB hub found [ 1.723203] hub 1-0:1.0: 12 ports detected [ 1.724380] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.724407] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.724474] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.725621] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.726730] usb usb2: Product: xHCI Host Controller [ 1.727830] usb usb2: Manufacturer: Linux 4.13.0-38-generic xhci-hcd [ 1.728974] usb usb2: SerialNumber: 0000:00:14.0 [ 1.730252] hub 2-0:1.0: USB hub found [ 1.731365] hub 2-0:1.0: 6 ports detected [ 1.733286] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.734393] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.737948] i8042: Warning: Keylock active [ 1.739362] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.740741] mousedev: PS/2 mouse device common for all mice [ 1.742478] rtc_cmos 00:01: RTC can wake from S4 [ 1.744247] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.745469] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.746649] i2c /dev entries driver [ 1.747874] device-mapper: uevent: version 1.0.3 [ 1.749090] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.750387] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.751584] intel_pstate: Intel P-state driver initializing [ 1.754046] intel_pstate: HWP enabled [ 1.755160] ledtrig-cpu: registered to indicate activity on CPUs [ 1.755741] EFI Variables Facility v0.08 2004-May-17 [ 1.761615] NET: Registered protocol family 10 [ 1.765868] Segment Routing with IPv6 [ 1.766449] NET: Registered protocol family 17 [ 1.767021] Key type dns_resolver registered [ 1.768476] RAS: Correctable Errors collector initialized. [ 1.769114] microcode: sig=0x806ea, pf=0x80, revision=0x84 [ 1.770068] microcode: Microcode Update Driver: v2.2. [ 1.770207] sched_clock: Marking stable (1770057436, 0)->(1779075089, -9017653) [ 1.771771] registered taskstats version 1 [ 1.772405] Loading compiled-in X.509 certificates [ 1.774390] Loaded X.509 cert 'Build time autogenerated kernel key: c2605e5c14235fcfeb65c5b79ee22aad03399288' [ 1.775126] Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring [ 1.775785] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.776425] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.778304] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 1.779167] zswap: loaded using pool lzo/zbud [ 1.782039] Key type big_key registered [ 1.782671] Key type trusted registered [ 1.784311] Key type encrypted registered [ 1.784920] AppArmor: AppArmor sha1 policy hashing enabled [ 2.052390] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 2.108507] evm: HMAC attrs: 0x1 [ 2.110138] Magic number: 14:496:759 [ 2.110960] rtc_cmos 00:01: setting system clock to 2018-04-17 00:46:30 UTC (1523925990) [ 2.111699] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.112348] EDD information not available. [ 2.112948] PM: Hibernation image not present or could not be loaded. [ 2.114256] Freeing unused kernel memory: 2376K [ 2.114863] Write protecting the kernel read-only data: 18432k [ 2.115883] Freeing unused kernel memory: 2024K [ 2.116682] Freeing unused kernel memory: 76K [ 2.118174] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.118744] x86/mm: Checking user space page tables [ 2.120125] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.211745] hidraw: raw HID events driver (C) Jiri Kosina [ 2.220775] usb 1-5: New USB device found, idVendor=0bda, idProduct=568c [ 2.221669] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.222410] usb 1-5: Product: Integrated_Webcam_HD [ 2.223145] usb 1-5: Manufacturer: CNFGH16N4624101EF3F2 [ 2.223975] usb 1-5: SerialNumber: 200901010001 [ 2.252561] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found [ 2.253701] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 2.255038] ahci 0000:00:17.0: version 3.0 [ 2.255191] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 2.256144] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.256917] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 2.257765] pps_core: LinuxPPS API ver. 1 registered [ 2.257902] scsi host0: ahci [ 2.257942] ata1: SATA max UDMA/133 abar m2048@0xef253000 port 0xef253100 irq 126 [ 2.259799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.261555] PTP clock support registered [ 2.265419] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.266107] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.266932] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.300588] clocksource: Switched to clocksource tsc [ 2.404061] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 2.546645] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b [ 2.547259] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.568395] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.571309] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.571310] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.571994] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.572731] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.573727] ata1.00: supports DRM functions and may not be fully accessible [ 2.575491] ata1.00: disabling queued TRIM support [ 2.575492] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133 [ 2.576101] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.580111] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 2.580113] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 2.580741] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2.581452] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.582458] ata1.00: supports DRM functions and may not be fully accessible [ 2.584121] ata1.00: disabling queued TRIM support [ 2.586102] ata1.00: configured for UDMA/133 [ 2.588165] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 2.628441] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.628878] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.628941] sd 0:0:0:0: [sda] Write Protect is off [ 2.628943] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.629034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.631373] sda: sda1 sda2 [ 2.632203] sd 0:0:0:0: [sda] supports TCG Opal [ 2.632204] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.666629] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 2.668173] usb 1-10: new full-speed USB device number 4 using xhci_hcd [ 2.735976] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 8c:ec:4b:e5:92:4c [ 2.736629] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.737264] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 2.738245] [drm:i915_driver_load [i915]] Found SunrisePoint LP PCH [ 2.738264] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03 [ 2.738331] [drm:intel_device_info_dump [i915]] i915 device info: platform=KABYLAKE gen=9 pciid=0x5917 rev=0x07 [ 2.738346] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no [ 2.738358] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no [ 2.738370] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no [ 2.738381] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes [ 2.738392] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes [ 2.738402] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes [ 2.738412] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes [ 2.738423] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes [ 2.738433] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes [ 2.738443] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes [ 2.738452] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes [ 2.738462] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: yes [ 2.738472] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes [ 2.738482] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no [ 2.738491] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes [ 2.738492] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.739108] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no [ 2.739118] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes [ 2.739128] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no [ 2.739137] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes [ 2.739146] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes [ 2.739156] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no [ 2.739165] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no [ 2.739174] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no [ 2.739183] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes [ 2.739192] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes [ 2.739201] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no [ 2.739209] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes [ 2.739218] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes [ 2.739227] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no [ 2.739236] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no [ 2.739245] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no [ 2.739254] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no [ 2.739263] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no [ 2.739271] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no [ 2.741877] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001 [ 2.741886] [drm:intel_device_info_runtime_init [i915]] slice total: 1 [ 2.741895] [drm:intel_device_info_runtime_init [i915]] subslice total: 3 [ 2.741904] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007 [ 2.741913] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3 [ 2.741922] [drm:intel_device_info_runtime_init [i915]] EU total: 24 [ 2.741931] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8 [ 2.741940] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n [ 2.741949] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n [ 2.741958] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y [ 2.741970] [drm:i915_driver_load [i915]] ppgtt mode: 3 [ 2.741982] [drm:i915_driver_load [i915]] use GPU semaphores? no [ 2.741989] [drm] Memory usable by graphics device = 4096M [ 2.742601] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 2.742615] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 32M [ 2.742616] checking generic (d0000000 7f0000) vs hw (d0000000 10000000) [ 2.742617] fb: switching to inteldrmfb from EFI VGA [ 2.743204] Console: switching to colour dummy device 80x25 [ 2.743293] [drm] Replacing VGA console driver [ 2.743320] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K [ 2.743345] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xcae88018 [ 2.743370] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 2.743409] [drm:intel_opregion_setup [i915]] SWSCI supported [ 2.749660] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 2.749675] [drm:intel_opregion_setup [i915]] ASLE supported [ 2.749687] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 2.749699] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.749749] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 2.749750] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.749752] [drm] Driver supports precise vblank timestamp query. [ 2.749771] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 2.749787] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212 [ 2.749801] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.749812] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 2.752186] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 2.752206] [drm:intel_bios_init [i915]] Panel type: 14 (VBT) [ 2.752222] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 2.752237] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 2.752246] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa [ 2.752259] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 2.752271] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 2.752282] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping. [ 2.752292] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 212 not known; assuming 38 [ 2.752303] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 2.752314] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 2.752324] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 2.752334] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.752348] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8 [ 2.752358] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.752368] [drm:intel_bios_init [i915]] Port C has invalid DDC pin 2, sticking to defaults [ 2.752377] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8 [ 2.752424] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 2.752452] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz [ 2.752469] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 2.752485] [drm:intel_power_well_enable [i915]] enabling power well 1 [ 2.752499] [drm:intel_power_well_enable [i915]] enabling MISC IO power well [ 2.752516] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 2.752528] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz [ 2.752539] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz [ 2.752565] [drm:intel_power_well_enable [i915]] enabling always-on [ 2.752577] [drm:intel_power_well_enable [i915]] enabling DC off [ 2.752588] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 2.752602] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 2.752613] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 2.752624] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well [ 2.752634] [drm:skl_set_power_well [i915]] Enabling DDI B IO power well [ 2.752643] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 2.752653] [drm:skl_set_power_well [i915]] Enabling DDI C IO power well [ 2.752662] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well [ 2.752672] [drm:skl_set_power_well [i915]] Enabling DDI D IO power well [ 2.752690] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_01.bin [ 2.753124] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [ 2.753808] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 2.753833] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) [ 2.753848] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) [ 2.753862] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) [ 2.753875] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) [ 2.753887] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) [ 2.753898] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) [ 2.753910] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) [ 2.753920] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) [ 2.753941] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 2.753975] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 2.753981] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.754307] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 2.754325] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT) [ 2.754392] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 2.754407] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.754421] [drm:intel_dp_init_panel_power_sequencer.part.15 [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.754434] [drm:intel_dp_init_panel_power_sequencer.part.15 [i915]] backlight on delay 1, off delay 200 [ 2.754503] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 2.754537] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 2.754603] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 2.755041] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 41 00 00 01 00 02 02 06 00 00 0b 00 [ 2.755455] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.756103] [drm:intel_dp_init_connector [i915]] EDP DPCD : 01 12 47 [ 2.759725] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 2.759740] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS [ 2.759798] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 7500/7500 [ 2.759831] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 2.759845] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 2.759861] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C [ 2.759874] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT) [ 2.759889] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 2.759902] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default) [ 2.759928] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 2.759946] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled [ 2.759963] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0 [ 2.759978] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled [ 2.759993] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0 [ 2.760009] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:46:pipe C] hw state readout: disabled [ 2.760050] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1 [ 2.760062] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 2.760073] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 2.760083] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 2.760097] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:47:DDI A] hw state readout: enabled, pipe A [ 2.760108] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:56:DDI B] hw state readout: disabled, pipe A [ 2.760118] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:59:DDI C] hw state readout: disabled, pipe A [ 2.760128] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST A] hw state readout: disabled, pipe A [ 2.760138] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST B] hw state readout: disabled, pipe B [ 2.760148] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:63:DP-MST C] hw state readout: disabled, pipe C [ 2.760159] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:48:eDP-1] hw state readout: enabled [ 2.760170] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:57:HDMI-A-1] hw state readout: disabled [ 2.760180] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:60:DP-1] hw state readout: disabled [ 2.760190] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:64:HDMI-A-2] hw state readout: disabled [ 2.760211] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state] [ 2.760223] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 2.760234] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 5288318, gmch_n: 8388608, link_m: 293795, link_n: 524288, tu: 64 [ 2.760245] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.760255] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.760262] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 151299 1920 1968 2000 2212 1080 1083 1089 1140 0x40 0x9 [ 2.760272] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.760278] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 151299 1920 1968 2000 2212 1080 1083 1089 1140 0x40 0x9 [ 2.760289] [drm:intel_dump_pipe_config [i915]] crtc timings: 151299 1920 1968 2000 2212 1080 1083 1089 1140, type: 0x40 flags: 0x9 [ 2.760300] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 151299 [ 2.760310] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 2.760320] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 2.760329] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.760345] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 2.760355] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.760365] [drm:intel_dump_pipe_config [i915]] [PLANE:26:plane 1A] disabled, scaler_id = -1 [ 2.760375] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 2A] disabled, scaler_id = -1 [ 2.760385] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = -1 [ 2.760395] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state] [ 2.760405] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 2.760414] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.760424] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.760430] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.760440] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.760445] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.760455] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.760465] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.760475] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 2.760485] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.760494] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.760508] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 2.760518] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.760528] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 1B] disabled, scaler_id = -1 [ 2.760538] [drm:intel_dump_pipe_config [i915]] [PLANE:35:plane 2B] disabled, scaler_id = -1 [ 2.760548] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = -1 [ 2.760558] [drm:intel_dump_pipe_config [i915]] [CRTC:46:pipe C][setup_hw_state] [ 2.760568] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 2.760578] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.760587] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.760592] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.760602] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.760607] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.760618] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.760628] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 2.760637] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [ 2.760647] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.760656] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.760670] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 2.760680] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.760690] [drm:intel_dump_pipe_config [i915]] [PLANE:40:plane 1C] disabled, scaler_id = -1 [ 2.760699] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 2C] disabled, scaler_id = -1 [ 2.760709] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor C] disabled, scaler_id = -1 [ 2.760748] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well [ 2.760763] [drm:skl_set_power_well [i915]] Disabling DDI D IO power well [ 2.760776] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well [ 2.760789] [drm:skl_set_power_well [i915]] Disabling DDI C IO power well [ 2.760801] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well [ 2.760813] [drm:skl_set_power_well [i915]] Disabling DDI B IO power well [ 2.760824] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 2.760838] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 2.760859] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 2.760876] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 2.760889] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 2.760905] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x0 [ 2.761272] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] [ 2.761321] [drm:i915_gem_context_init [i915]] logical context support initialized [ 2.761364] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000 [ 2.761974] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 2.762005] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 17 [ 2.762057] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 2.762108] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 2.762156] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 2.762215] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 2.762232] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 2.762247] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 2.762261] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 2.762353] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 2.762369] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 2.762385] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 2.762399] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.762412] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.762570] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 2.762662] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 2.762752] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-1 [ 2.762804] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 2.762826] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.762973] [drm:intel_opregion_register [i915]] 4 outputs detected [ 2.763526] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:48:eDP-1] status updated from unknown to connected [ 2.763546] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 2.765699] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.765713] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.767982] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.767989] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.769107] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.769979] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.770154] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.770174] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.772202] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.772207] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.772211] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] status updated from unknown to disconnected [ 2.772228] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 2.772259] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 2.772274] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 2.772303] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 2.772319] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 2.772323] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:60:DP-1] status updated from unknown to disconnected [ 2.772340] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 2.774667] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.774687] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.776275] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.776282] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.778611] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.778631] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.780281] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.780285] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.780288] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] status updated from unknown to disconnected [ 2.780296] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.780299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 2.780321] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 2.780340] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 2.780358] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 2.780374] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.780388] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.780789] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.781449] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 2.781454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 2.781461] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 2.781466] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 2.781469] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 2.781486] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 2.783727] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.783746] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.786032] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.786038] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.788275] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.788294] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.790623] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.790627] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.790630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 2.790633] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 2.790654] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 2.790671] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 2.790687] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 2.790717] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 2.790734] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 2.790738] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 2.790740] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 2.790760] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 2.792279] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.792298] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.794625] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.794632] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.796285] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.796304] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.798629] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.798634] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.798637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 2.798641] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes [ 2.798643] [drm:drm_setup_crtcs [drm_kms_helper]] connector 57 enabled? no [ 2.798645] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? no [ 2.798647] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no [ 2.798669] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 2.798671] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48 [ 2.798674] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0 [ 2.798676] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080 [ 2.798678] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 2.798681] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 32 (0,0) [ 2.798700] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 2.799248] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00040000 [ 2.799262] [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] [ 2.799264] [drm:drm_setup_crtcs [drm_kms_helper]] [ 2.799267] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 2.799286] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 2.799301] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 2.799335] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 2.799363] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.799375] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.799376] fbcon: inteldrmfb (fb0) is primary device [ 2.799794] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.800456] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 2.800460] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 2.800467] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 2.800472] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 2.800475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 2.800493] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 2.802763] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.802784] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.805067] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.805073] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 2.807356] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.807375] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.809715] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.809719] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.809722] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 2.809725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 2.809746] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 2.809763] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 2.809779] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 2.809809] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 2.809826] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 2.809830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 2.809833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 2.809853] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 2.812224] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.812242] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.814568] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.814574] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 2.816904] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.816923] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.819253] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.819257] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 2.819261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 2.819265] [drm:drm_setup_crtcs [drm_kms_helper]] connector 48 enabled? yes [ 2.819267] [drm:drm_setup_crtcs [drm_kms_helper]] connector 57 enabled? no [ 2.819269] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? no [ 2.819271] [drm:drm_setup_crtcs [drm_kms_helper]] connector 64 enabled? no [ 2.819292] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 2.819295] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 48 [ 2.819297] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 48 0 [ 2.819299] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080 [ 2.819302] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config [ 2.819305] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 32 (0,0) [ 2.819336] [drm:intel_atomic_check.part.132 [i915]] [CONNECTOR:48:eDP-1] checking for sink bpp constrains [ 2.819353] [drm:intel_atomic_check.part.132 [i915]] clamping display bpp (was 36) to EDID reported max of 18 [ 2.819371] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 2.819391] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 151300KHz [ 2.819408] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 2.819422] [drm:intel_dp_compute_config [i915]] DP link bw required 340425 available 540000 [ 2.819438] [drm:intel_atomic_check.part.132 [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 2.819455] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 2.819468] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 2.819481] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 5288318, gmch_n: 8388608, link_m: 293795, link_n: 524288, tu: 64 [ 2.819493] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.819504] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.819512] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 2.819523] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.819529] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 2.819542] [drm:intel_dump_pipe_config [i915]] crtc timings: 151300 1920 1968 2000 2212 1080 1083 1089 1140, type: 0x48 flags: 0x9 [ 2.819553] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 151300 [ 2.819564] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 2.819575] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.819586] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 2.819602] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 2.819613] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.819624] [drm:intel_dump_pipe_config [i915]] [PLANE:26:plane 1A] disabled, scaler_id = -1 [ 2.819634] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 2A] disabled, scaler_id = -1 [ 2.819645] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = -1 [ 2.819660] [drm:intel_atomic_check.part.132 [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 2.819678] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated DPLL 0 [ 2.819692] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A [ 2.819719] [drm:intel_edp_backlight_off [i915]] [ 2.846502] usb 1-10: New USB device found, idVendor=0a5c, idProduct=5834 [ 2.846503] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.846504] usb 1-10: Product: 5880 [ 2.846505] usb 1-10: Manufacturer: Broadcom Corp [ 2.846506] usb 1-10: SerialNumber: 0123456789ABCD [ 3.024432] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 3.024474] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling [ 3.024521] [drm:intel_disable_pipe [i915]] disabling pipe A [ 3.027060] [drm:intel_edp_panel_off.part.24 [i915]] Turn eDP port A panel power off [ 3.027109] [drm:intel_edp_panel_off.part.24 [i915]] Wait for panel power off time [ 3.027190] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 [ 3.077530] [drm:wait_panel_status [i915]] Wait complete [ 3.077550] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well [ 3.077567] [drm:skl_set_power_well [i915]] Disabling DDI A/E IO power well [ 3.077592] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 32 [ 3.077611] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 3.077632] [drm:intel_set_cdclk [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz [ 3.077655] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 3.077672] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DDI A] [ 3.077686] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DDI B] [ 3.077699] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:DDI C] [ 3.077711] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST A] [ 3.077723] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST B] [ 3.077734] [drm:intel_atomic_commit_tail [i915]] [ENCODER:63:DP-MST C] [ 3.077747] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 0 [ 3.077760] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 1 [ 3.077772] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 2 [ 3.077784] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 3 [ 3.077801] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 32 [ 3.077815] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 3.077843] [drm:edp_panel_on [i915]] Turn eDP port A panel power on [ 3.077872] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 3.079769] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 3.079791] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 3.079810] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 [ 3.079843] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 3.708498] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 [ 3.708532] [drm:wait_panel_status [i915]] Wait complete [ 3.708578] [drm:edp_panel_on [i915]] Wait for panel power on [ 3.708657] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control 00000003 [ 3.806035] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 3.806057] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 3.806076] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 [ 3.806109] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 3.836692] [drm] RC6 on [ 3.910573] [drm:wait_panel_status [i915]] Wait complete [ 3.910594] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well [ 3.910610] [drm:skl_set_power_well [i915]] Enabling DDI A/E IO power well [ 3.910649] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 3.910723] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 3.911818] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 3.911834] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 3.911864] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 3.911877] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 3.912507] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 3.912520] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 3.913467] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 3.913480] [drm:intel_dp_start_link_train [i915]] Link Training Passed at Link Rate = 270000, Lane count = 2 [ 3.913956] [drm:intel_enable_pipe [i915]] enabling pipe A [ 3.913973] [drm:intel_edp_backlight_on [i915]] [ 3.913989] [drm:intel_panel_enable_backlight [i915]] pipe A [ 3.914067] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 7500 [ 3.920210] [drm:intel_psr_enable [i915]] PSR not supported by this panel [ 3.920223] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS [ 3.920241] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 3.920254] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 3.947531] [drm:verify_connector_state.isra.111 [i915]] [CONNECTOR:48:eDP-1] [ 3.947554] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 3.947582] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 0 [ 3.947601] [drm:intel_enable_sagv [i915]] Enabling the SAGV [ 3.964162] Console: switching to colour frame buffer device 240x67 [ 3.983031] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.061111] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.157478] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.169703] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 4.188174] systemd[1]: Detected architecture x86-64. [ 4.188528] systemd[1]: Set hostname to . [ 4.244884] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.245015] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.245100] systemd[1]: Listening on Syslog Socket. [ 4.245239] systemd[1]: Created slice System Slice. [ 4.245580] systemd[1]: Mounting Kernel Debug File System... [ 4.245693] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.245819] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.276268] lp: driver loaded but no devices found [ 4.279030] ppdev: user-space parallel port driver [ 4.342717] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 4.364140] systemd-journald[350]: Received request to flush runtime journal from PID 1 [ 4.449148] random: crng init done [ 4.521320] Bluetooth: Core ver 2.22 [ 4.521331] NET: Registered protocol family 31 [ 4.521331] Bluetooth: HCI device and connection manager initialized [ 4.521333] Bluetooth: HCI socket layer initialized [ 4.521334] Bluetooth: L2CAP socket layer initialized [ 4.521337] Bluetooth: SCO socket layer initialized [ 4.526643] Bluetooth: HCI UART driver ver 2.3 [ 4.526644] Bluetooth: HCI UART protocol H4 registered [ 4.526644] Bluetooth: HCI UART protocol BCSP registered [ 4.526653] Bluetooth: HCI UART protocol LL registered [ 4.526654] Bluetooth: HCI UART protocol ATH3K registered [ 4.526654] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 4.526673] Bluetooth: HCI UART protocol Intel registered [ 4.526681] Bluetooth: HCI UART protocol Broadcom registered [ 4.526682] Bluetooth: HCI UART protocol QCA registered [ 4.526682] Bluetooth: HCI UART protocol AG6XX registered [ 4.526682] Bluetooth: HCI UART protocol Marvell registered [ 4.540421] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20170531/nsprepkg-130) [ 4.540571] input: Intel HID events as /devices/platform/INT33D5:00/input/input6 [ 4.560508] intel-hid INT33D5:00: platform supports 5 button array [ 4.560540] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7 [ 4.564770] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.565248] media: Linux media interface: v0.10 [ 4.566704] usbcore: registered new interface driver btusb [ 4.567125] Bluetooth: hci0: Firmware revision 0.1 build 185 week 49 2017 [ 4.570420] Linux video capture interface: v2.00 [ 4.573508] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 4.576392] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 4.579182] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:568c) [ 4.581706] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 4.581707] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized! [ 4.581708] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 4.581709] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 4.581749] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input8 [ 4.581782] usbcore: registered new interface driver uvcvideo [ 4.581783] USB Video Class driver (1.1.1) [ 4.585878] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.589852] dell_wmi: Dell descriptor buffer has invalid buffer length (32768) [ 4.589853] dell_wmi: Detected Dell WMI interface version 1 [ 4.589904] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9 [ 4.608945] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.608946] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.608964] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.608965] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.608965] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.608966] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.617544] AVX2 version of gcm_enc/dec engaged. [ 4.617545] AES CTR mode by8 optimization enabled [ 4.651428] intel_rapl: Found RAPL domain package [ 4.651429] intel_rapl: Found RAPL domain core [ 4.651430] intel_rapl: Found RAPL domain uncore [ 4.651430] intel_rapl: Found RAPL domain dram [ 4.696514] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 4.697491] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 4.764272] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 4.764805] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 4.766948] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 4.767180] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 4.840254] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 4.840815] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 4.856216] i2c_hid i2c-DELL0817:00: i2c-DELL0817:00 supply vdd not found, using dummy regulator [ 4.936345] ACPI Error: [\_SB_.PCI0.RP05.PXSX.WGST] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 4.936888] ACPI Error: Method parse/execution failed \PSM._STA, AE_NOT_FOUND (20170531/psparse-550) [ 4.937568] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.937574] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.971022] dell_laptop: Using i8042 filter function for receiving events [ 4.984498] Intel(R) Wireless WiFi driver for Linux [ 4.984499] Copyright(c) 2003- 2015 Intel Corporation [ 4.984828] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 4.987048] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 4.988157] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2 [ 4.988297] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2 [ 4.995062] iwlwifi 0000:02:00.0: loaded firmware version 31.560484.0 op_mode iwlmvm [ 5.014071] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.017716] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.017735] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 5.024356] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 5.053182] input: DELL0817:00 044E:121F Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-DELL0817:00/0018:044E:121F.0001/input/input10 [ 5.053948] input: DELL0817:00 044E:121F Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-DELL0817:00/0018:044E:121F.0001/input/input11 [ 5.054017] input: DELL0817:00 044E:121F UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-DELL0817:00/0018:044E:121F.0001/input/input12 [ 5.054065] input: DELL0817:00 044E:121F UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-DELL0817:00/0018:044E:121F.0001/input/input13 [ 5.054111] input: DELL0817:00 044E:121F UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-DELL0817:00/0018:044E:121F.0001/input/input14 [ 5.054160] hid-multitouch 0018:044E:121F.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0817:00 044E:121F] on i2c-DELL0817:00 [ 5.096580] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.096582] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.096583] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.096583] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.096584] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.096586] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 5.096587] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 5.096587] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 5.097193] Adding 33411068k swap on /dev/mapper/ubuntu--mate--vg-swap_1. Priority:-1 extents:1 across:33411068k SSFS [ 5.097448] iwlwifi 0000:02:00.0: base HW address: 74:e5:f9:f1:90:46 [ 5.149989] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 5.150005] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 5.150017] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 5.150029] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 5.150039] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 5.150049] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 5.150062] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 5.150071] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 5.150081] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 5.151136] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 5.151183] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 5.151224] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 5.151266] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 5.151309] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 5.151353] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 5.161282] audit: type=1400 audit(1523925993.550:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4407/usr/lib/snapd/snap-confine" pid=774 comm="apparmor_parser" [ 5.161285] audit: type=1400 audit(1523925993.550:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4407/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=774 comm="apparmor_parser" [ 5.161300] audit: type=1400 audit(1523925993.550:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=781 comm="apparmor_parser" [ 5.161623] audit: type=1400 audit(1523925993.550:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=780 comm="apparmor_parser" [ 5.161624] audit: type=1400 audit(1523925993.550:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=780 comm="apparmor_parser" [ 5.161626] audit: type=1400 audit(1523925993.550:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=780 comm="apparmor_parser" [ 5.161871] audit: type=1400 audit(1523925993.550:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=773 comm="apparmor_parser" [ 5.161873] audit: type=1400 audit(1523925993.550:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=773 comm="apparmor_parser" [ 5.161874] audit: type=1400 audit(1523925993.550:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=773 comm="apparmor_parser" [ 5.175036] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.175187] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 5.175201] thermal thermal_zone9: failed to read out thermal zone (-5) [ 5.176631] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.214058] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.214079] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 5.393961] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.393961] Bluetooth: BNEP filters: protocol multicast [ 5.393963] Bluetooth: BNEP socket layer initialized [ 5.580351] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 5.764237] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 5.766776] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 5.831085] [drm:drm_mode_addfb2 [drm]] [FB:66] [ 5.870168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 5.870192] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 5.870207] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 5.870220] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.870231] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.870242] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.870650] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 5.871319] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 5.871324] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 5.871331] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 5.871337] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 5.871414] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 5.871430] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 5.873726] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 5.873740] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 5.875982] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 5.875990] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 5.878395] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.878409] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 5.880724] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.880729] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.880732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 5.880763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 5.880778] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 5.880789] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.880801] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 5.880829] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.880844] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 5.880848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 5.880867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 5.880880] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 5.883213] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.883228] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.885371] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.885385] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.887715] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.887728] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.890059] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.890063] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.890066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 5.890131] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 5.890146] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 5.890160] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 5.890174] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.890186] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.890197] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.890606] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 5.891270] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 5.891275] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 5.891281] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 5.891287] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 5.891689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 5.891702] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 5.894031] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 5.894046] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 5.896330] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 5.896339] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 5.898709] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.898723] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 5.900357] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.900362] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.900365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 5.900387] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 5.900420] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 5.900453] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.900466] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 5.900512] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.900526] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 5.900530] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 5.900539] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 5.900552] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 5.902888] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.902902] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.905757] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.905765] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.906463] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.906475] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.907338] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.907342] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.907345] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 5.997892] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6.072277] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6.364178] [drm:drm_mode_addfb2 [drm]] [FB:69] [ 6.364187] [drm:drm_mode_setcrtc [drm]] [CRTC:32:pipe A] [ 6.364195] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:48:eDP-1] [ 6.397562] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe B] [ 6.397580] [drm:drm_mode_setcrtc [drm]] [CRTC:46:pipe C] [ 8.924184] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 8.924249] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 8.924263] [drm:intel_power_well_disable [i915]] disabling DC off [ 8.924277] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 8.924286] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 [ 10.323669] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 10.323695] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 10.323707] [drm:intel_power_well_enable [i915]] enabling DC off [ 10.323719] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 [ 10.323737] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 10.323751] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 10.323763] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 10.323774] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 10.323799] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 10.323866] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 10.324282] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 10.324964] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 10.324971] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 10.324981] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 10.324989] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 10.325206] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 10.325230] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 10.327384] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.327397] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.329668] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.329678] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 10.331924] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.331937] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.334268] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.334274] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.334277] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 10.334293] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 10.334308] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 10.334319] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 10.334330] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 10.334359] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 10.334373] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 10.334377] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 10.334382] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 10.334395] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 10.336547] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.336560] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.338892] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.338900] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.340277] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.340290] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.342629] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.342635] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.342639] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 10.343505] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 10.343530] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 10.343552] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 10.343572] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 10.343591] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 10.343609] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 10.344025] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 10.344696] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 10.344701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 10.344708] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 10.344713] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 10.344850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 10.344866] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 10.347156] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.347170] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.349497] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.349503] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 10.351833] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.351847] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.354170] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.354175] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.354178] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 10.354188] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 10.354203] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 10.354214] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 10.354225] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 10.354253] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 10.354270] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 10.354274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 10.354279] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 10.354291] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 10.356342] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.356358] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.358531] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.358542] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.360838] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.360854] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.363147] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.363154] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.363158] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 10.363978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 10.364005] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 10.364041] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 10.364067] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 10.364089] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 10.364110] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 10.364517] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 10.365187] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 10.365192] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 10.365200] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 10.365206] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 10.365361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 10.365378] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 10.367658] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.367676] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.369184] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.369194] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 10.371476] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.371496] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.373897] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.373908] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.373914] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 10.373947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 10.373971] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 10.373992] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 10.374010] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 10.374050] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 10.374069] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 10.374075] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 10.374086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 10.374105] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 10.376227] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.376250] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.378520] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.378535] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.380885] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.380910] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.383295] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.383306] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.383311] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 10.384400] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 10.384436] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 10.384463] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 10.384490] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 10.384513] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 10.384534] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 10.384957] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 10.385650] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 10.385658] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 10.385670] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 10.385680] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 10.385921] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 10.385947] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 10.388219] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.388246] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.390502] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.390518] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 10.392843] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.392877] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.395242] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.395259] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.395268] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 10.395317] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 10.395360] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 10.395391] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 10.395427] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 10.395476] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 10.395507] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 10.395516] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 10.395532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 10.395567] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 10.397826] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.397866] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.399583] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.399614] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.401990] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.402041] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.404432] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.404459] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.404474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 10.553294] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 10.553309] [drm:skl_set_power_well [i915]] Enabling power well 2 [ 10.558862] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 10.558882] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 10.558899] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 10.558915] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 10.558945] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 10.558959] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 10.558971] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 10.558983] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 10.558995] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 10.689404] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] [ 10.689433] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1] [ 10.689453] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 10.689471] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 10.689486] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 10.689501] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 10.689919] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 10.690617] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found [ 10.690626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:48:eDP-1] probed modes : [ 10.690638] [drm:drm_mode_debug_printmodeline [drm]] Modeline 49:"1920x1080" 60 151300 1920 1968 2000 2212 1080 1083 1089 1140 0x48 0x9 [ 10.690648] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1920x1080" 48 117730 1920 1968 2000 2190 1080 1083 1089 1120 0x40 0x9 [ 10.690860] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] [ 10.690889] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-1] [ 10.692130] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.692153] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.694314] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 10.694326] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 10.696130] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.696155] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 10.698325] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 10.698335] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.698342] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:57:HDMI-A-1] disconnected [ 10.698369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] [ 10.698399] [drm:intel_dp_detect [i915]] [CONNECTOR:60:DP-1] [ 10.698418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:DP-1] disconnected [ 10.698429] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] [ 10.698455] [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-2] [ 10.700127] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.700153] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.702326] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 10.702342] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 10.704139] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.704165] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 10.706353] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 10.706363] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 10.706369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-2] disconnected [ 10.823182] Bluetooth: RFCOMM TTY layer initialized [ 10.823187] Bluetooth: RFCOMM socket layer initialized [ 10.823191] Bluetooth: RFCOMM ver 1.11 [ 10.976537] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.976609] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 13.788225] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 13.788381] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 13.788487] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 13.788544] [drm:skl_set_power_well [i915]] Disabling power well 2 [ 13.788587] [drm:intel_power_well_disable [i915]] disabling DC off [ 13.788630] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 13.788670] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02