[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x50b with crng_init=0 [ 0.000000] Linux version 4.13.0-30-lowlatency (buildd@lgw01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #33~16.04.1-Ubuntu SMP PREEMPT Mon Jan 15 23:19:32 UTC 2018 (Ubuntu 4.13.0-30.33~16.04.1-lowlatency 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-30-lowlatency root=/dev/mapper/VG_OS-ubuntu_16.04_rootfs ro pci=use_crs,realloc,assign-busses,pcie_scan_all acpi_osi=! "acpi_osi=Windows 2006" splash crashkernel=384M-2G:128M,2G-:256M vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe71fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfe72000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Dell Inc. XPS M1530 / , BIOS A12 11/19/2008 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FE0000000 write-back [ 0.000000] 5 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 8191M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfe72 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8f4cc0099000] 99000 size 24576 [ 0.000000] BRK [0x9c358000, 0x9c358fff] PGTABLE [ 0.000000] BRK [0x9c359000, 0x9c359fff] PGTABLE [ 0.000000] BRK [0x9c35a000, 0x9c35afff] PGTABLE [ 0.000000] BRK [0x9c35b000, 0x9c35bfff] PGTABLE [ 0.000000] BRK [0x9c35c000, 0x9c35cfff] PGTABLE [ 0.000000] BRK [0x9c35d000, 0x9c35dfff] PGTABLE [ 0.000000] BRK [0x9c35e000, 0x9c35efff] PGTABLE [ 0.000000] BRK [0x9c35f000, 0x9c35ffff] PGTABLE [ 0.000000] BRK [0x9c360000, 0x9c360fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34fc6000-0x367dafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FBC90 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DFE73A00 000064 (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: FACP 0x00000000DFE7389C 0000F4 (v04 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: DSDT 0x00000000DFE74000 004BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000DFE82800 000040 [ 0.000000] ACPI: FACS 0x00000000DFE82800 000040 [ 0.000000] ACPI: HPET 0x00000000DFE73B00 000038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 0x00000000DFE73C00 000068 (v01 DELL M08 27D80B13 ASL 00000047) [ 0.000000] ACPI: MCFG 0x00000000DFE73BC0 00003E (v16 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: SLIC 0x00000000DFE73C9C 000176 (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: OSFR 0x00000000DFE73200 00002C (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: BOOT 0x00000000DFE737C0 000028 (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: SSDT 0x00000000DFE7217E 0004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21ffd1000-0x21fffbfff] [ 0.000000] Reserving 256MB of memory at 576MB for crashkernel (System RAM: 8190MB) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfe71fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.000000] On node 0 totalpages: 2096656 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14266 pages used for memmap [ 0.000000] DMA32 zone: 913010 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfe72000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed9ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeda6000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff8f4edfc00000 s146904 r8192 d29224 u1048576 [ 0.000000] pcpu-alloc: s146904 r8192 d29224 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063873 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-30-lowlatency root=/dev/mapper/VG_OS-ubuntu_16.04_rootfs ro pci=use_crs,realloc,assign-busses,pcie_scan_all acpi_osi=! "acpi_osi=Windows 2006" splash crashkernel=384M-2G:128M,2G-:256M vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7876056K/8386624K available (12300K kernel code, 2717K rwdata, 4004K rodata, 2300K init, 2384K bss, 510568K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37816 entries in 148 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2593.321 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.64 BogoMIPS (lpj=2593321) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170531 [ 0.003885] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.003913] Security Framework initialized [ 0.003915] Yama: becoming mindful. [ 0.003935] AppArmor: AppArmor initialized [ 0.008059] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010714] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010818] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.010902] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011235] FEATURE SPEC_CTRL Not Present [ 0.011239] CPU: Physical Processor ID: 0 [ 0.011240] CPU: Processor Core ID: 0 [ 0.011242] mce: CPU supports 6 MCE banks [ 0.011251] CPU0: Thermal monitoring enabled (TM2) [ 0.011255] process: using mwait in idle threads [ 0.011261] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.011263] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.011416] Freeing SMP alternatives memory: 32K [ 0.013151] smpboot: Max logical packages: 1 [ 0.014212] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.028009] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.028020] ... version: 2 [ 0.028022] ... bit width: 40 [ 0.028023] ... generic registers: 2 [ 0.028024] ... value mask: 000000ffffffffff [ 0.028026] ... max period: 000000007fffffff [ 0.028027] ... fixed-purpose events: 3 [ 0.028028] ... event mask: 0000000700000003 [ 0.030003] Hierarchical SRCU implementation. [ 0.034141] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.036003] smp: Bringing up secondary CPUs ... [ 0.044019] x86: Booting SMP configuration: [ 0.044021] .... node #0, CPUs: #1 [ 0.047031] smp: Brought up 1 node, 2 CPUs [ 0.047031] smpboot: Total of 2 processors activated (10373.28 BogoMIPS) [ 0.048489] devtmpfs: initialized [ 0.048489] x86/mm: Memory block size: 128MB [ 0.049573] evm: security.selinux [ 0.049575] evm: security.SMACK64 [ 0.049576] evm: security.SMACK64EXEC [ 0.049577] evm: security.SMACK64TRANSMUTE [ 0.049578] evm: security.SMACK64MMAP [ 0.049579] evm: security.ima [ 0.049581] evm: security.capability [ 0.050101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.050108] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.050172] pinctrl core: initialized pinctrl subsystem [ 0.050296] RTC time: 23:48:05, date: 01/18/18 [ 0.050296] NET: Registered protocol family 16 [ 0.051008] cpuidle: using governor ladder [ 0.052004] cpuidle: using governor menu [ 0.052005] PCCT header not found. [ 0.052057] Simple Boot Flag at 0x79 set to 0x80 [ 0.052068] ACPI: bus type PCI registered [ 0.052070] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.052141] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.052147] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.052147] PCI: Using configuration type 1 for base access [ 0.053684] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.054066] ACPI: Disabled all _OSI OS vendors [ 0.054069] ACPI: Added _OSI(Module Device) [ 0.054070] ACPI: Added _OSI(Processor Device) [ 0.054072] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.054073] ACPI: Added _OSI(Processor Aggregator Device) [ 0.054075] ACPI: Added _OSI(Windows 2006) [ 0.057620] ACPI: Dynamic OEM Table Load: [ 0.057628] ACPI: SSDT 0xFFFF8F4ED6353800 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.058097] ACPI: Dynamic OEM Table Load: [ 0.058103] ACPI: SSDT 0xFFFF8F4ED62AE000 0005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.058394] ACPI: Dynamic OEM Table Load: [ 0.058400] ACPI: SSDT 0xFFFF8F4ED632BF00 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.058497] ACPI: Dynamic OEM Table Load: [ 0.058502] ACPI: SSDT 0xFFFF8F4ED6343540 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.058806] ACPI: Interpreter enabled [ 0.058824] ACPI: (supports S0 S3 S4 S5) [ 0.058826] ACPI: Using IOAPIC for interrupt routing [ 0.058847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.059000] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.115390] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.115396] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.115401] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.115409] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.123509] PCI host bridge to bus 0000:00 [ 0.123513] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.123515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.123517] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.123522] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.123524] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.123526] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window] [ 0.123528] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window] [ 0.123530] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window] [ 0.123532] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window] [ 0.123534] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window] [ 0.123536] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window] [ 0.123538] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window] [ 0.123540] pci_bus 0000:00: root bus resource [mem 0x220000000-0x417ffffff window] [ 0.123542] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.123552] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.123654] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400 [ 0.123696] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.123812] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.123872] pci 0000:00:1a.0: reg 0x20: [io 0x6f20-0x6f3f] [ 0.123979] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.124044] pci 0000:00:1a.1: reg 0x20: [io 0x6f00-0x6f1f] [ 0.124165] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.124191] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff] [ 0.124290] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.124381] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.124412] pci 0000:00:1b.0: reg 0x10: [mem 0xf6ffc000-0xf6ffffff 64bit] [ 0.124518] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.124615] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.124731] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.124833] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.124949] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.125059] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.125175] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.125274] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.125333] pci 0000:00:1d.0: reg 0x20: [io 0x6f80-0x6f9f] [ 0.125440] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.125499] pci 0000:00:1d.1: reg 0x20: [io 0x6f60-0x6f7f] [ 0.125606] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.125665] pci 0000:00:1d.2: reg 0x20: [io 0x6f40-0x6f5f] [ 0.125781] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.125808] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff] [ 0.125906] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.125990] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.126155] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.126272] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.126278] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.126282] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.126286] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.126290] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.126400] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.126421] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.126432] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.126443] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.126454] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.126465] pci 0000:00:1f.1: reg 0x20: [io 0x6fa0-0x6faf] [ 0.126489] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.126491] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.126493] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.126495] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.126583] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.126610] pci 0000:00:1f.2: reg 0x10: [io 0x6eb0-0x6eb7] [ 0.126621] pci 0000:00:1f.2: reg 0x14: [io 0x6eb8-0x6ebb] [ 0.126631] pci 0000:00:1f.2: reg 0x18: [io 0x6ec0-0x6ec7] [ 0.126642] pci 0000:00:1f.2: reg 0x1c: [io 0x6ec8-0x6ecb] [ 0.126653] pci 0000:00:1f.2: reg 0x20: [io 0x6ee0-0x6eff] [ 0.126664] pci 0000:00:1f.2: reg 0x24: [mem 0xf6ffb800-0xf6ffbfff] [ 0.126722] pci 0000:00:1f.2: PME# supported from D3hot [ 0.126806] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.126827] pci 0000:00:1f.3: reg 0x10: [mem 0xf6ffb700-0xf6ffb7ff] [ 0.126867] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df] [ 0.127063] pci 0000:01:00.0: [10de:0407] type 00 class 0x030000 [ 0.127098] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff] [ 0.127117] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.127136] pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit] [ 0.127149] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.127162] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.130016] pci 0000:00:01.0: PCI bridge to [bus 01-ff] [ 0.130020] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.130023] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff] [ 0.130026] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.130028] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.130123] pci 0000:02:00.0: [11ab:4354] type 00 class 0x020000 [ 0.130174] pci 0000:02:00.0: reg 0x10: [mem 0xf1ffc000-0xf1ffffff 64bit] [ 0.130191] pci 0000:02:00.0: reg 0x18: [io 0xde00-0xdeff] [ 0.130352] pci 0000:02:00.0: supports D1 D2 [ 0.130354] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133025] pci 0000:00:1c.0: PCI bridge to [bus 02-ff] [ 0.133030] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.133034] pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff] [ 0.133042] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.133168] pci 0000:03:00.0: [8086:4229] type 00 class 0x028000 [ 0.133236] pci 0000:03:00.0: reg 0x10: [mem 0xf1efe000-0xf1efffff 64bit] [ 0.133468] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.136049] pci 0000:00:1c.1: PCI bridge to [bus 03-ff] [ 0.136057] pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff] [ 0.136064] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 [ 0.136154] acpiphp: Slot [1] registered [ 0.136162] pci 0000:00:1c.4: PCI bridge to [bus 04-ff] [ 0.136166] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.136171] pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff] [ 0.136177] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.136179] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 0.136260] pci 0000:05:09.0: [1180:0832] type 00 class 0x0c0010 [ 0.136286] pci 0000:05:09.0: reg 0x10: [mem 0xf1bff800-0xf1bfffff] [ 0.136384] pci 0000:05:09.0: supports D1 D2 [ 0.136386] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136448] pci 0000:05:09.1: [1180:0822] type 00 class 0x080501 [ 0.136474] pci 0000:05:09.1: reg 0x10: [mem 0xf1bff500-0xf1bff5ff] [ 0.137060] pci 0000:05:09.1: supports D1 D2 [ 0.137062] pci 0000:05:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137121] pci 0000:05:09.2: [1180:0592] type 00 class 0x088000 [ 0.137146] pci 0000:05:09.2: reg 0x10: [mem 0xf1bff600-0xf1bff6ff] [ 0.137243] pci 0000:05:09.2: supports D1 D2 [ 0.137244] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137298] pci 0000:05:09.3: [1180:0852] type 00 class 0x088000 [ 0.137324] pci 0000:05:09.3: reg 0x10: [mem 0xf1bff700-0xf1bff7ff] [ 0.137423] pci 0000:05:09.3: supports D1 D2 [ 0.137424] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137515] pci 0000:00:1e.0: PCI bridge to [bus 05-ff] (subtractive decode) [ 0.137523] pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.137530] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.137532] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.137533] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.137535] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.137536] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode) [ 0.137538] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode) [ 0.137539] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode) [ 0.137540] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode) [ 0.137542] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode) [ 0.137543] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode) [ 0.137545] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode) [ 0.137546] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode) [ 0.137548] pci 0000:00:1e.0: bridge window [mem 0x220000000-0x417ffffff window] (subtractive decode) [ 0.137549] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05 [ 0.137862] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 0.137939] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.138019] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.138084] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.138156] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.138231] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.138304] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.138369] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.138898] SCSI subsystem initialized [ 0.138937] libata version 3.00 loaded. [ 0.138955] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.138955] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.138955] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.138955] vgaarb: loaded [ 0.139022] ACPI: bus type USB registered [ 0.139041] usbcore: registered new interface driver usbfs [ 0.139050] usbcore: registered new interface driver hub [ 0.139063] usbcore: registered new device driver usb [ 0.139104] EDAC MC: Ver: 3.0.0 [ 0.139236] PCI: Using ACPI for IRQ routing [ 0.141363] PCI: pci_cache_line_size set to 64 bytes [ 0.141488] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.141489] e820: reserve RAM buffer [mem 0xdfe72000-0xdfffffff] [ 0.141588] NetLabel: Initializing [ 0.141590] NetLabel: domain hash size = 128 [ 0.141591] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.141610] NetLabel: unlabeled traffic allowed by default [ 0.142072] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.142078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.142082] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.144023] clocksource: Switched to clocksource hpet [ 0.159825] VFS: Disk quotas dquot_6.6.0 [ 0.159857] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.160020] AppArmor: AppArmor Filesystem Enabled [ 0.160101] pnp: PnP ACPI init [ 0.160232] system 00:00: [mem 0xff800000-0xff8fffff] has been reserved [ 0.160235] system 00:00: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.160240] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.160292] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.160327] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.160358] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.160405] system 00:04: [io 0x0c80-0x0cff] could not be reserved [ 0.160409] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.160483] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.160487] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.160603] pnp 00:06: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.160605] pnp 00:06: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.160633] system 00:06: [io 0x0900-0x097f] has been reserved [ 0.160635] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.160639] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.160662] pnp 00:07: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.160665] pnp 00:07: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.160667] pnp 00:07: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.160696] system 00:07: [io 0xf400-0xf4fe] has been reserved [ 0.160698] system 00:07: [io 0x1080-0x10bf] has been reserved [ 0.160700] system 00:07: [io 0x10c0-0x10df] has been reserved [ 0.160702] system 00:07: [io 0x0809] has been reserved [ 0.160706] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.170366] system 00:08: [mem 0x00000000-0x0009efff] could not be reserved [ 0.170369] system 00:08: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.170372] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.170374] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.170377] system 00:08: [mem 0x00100000-0xdfe71fff] could not be reserved [ 0.170379] system 00:08: [mem 0xdfe72000-0xdfefffff] has been reserved [ 0.170381] system 00:08: [mem 0xdff00000-0xdfffffff] has been reserved [ 0.170383] system 00:08: [mem 0xffe00000-0xffffffff] has been reserved [ 0.170388] system 00:08: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.170390] system 00:08: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.170392] system 00:08: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.170395] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.170397] system 00:08: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.170399] system 00:08: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.170401] system 00:08: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.170403] system 00:08: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.170405] system 00:08: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.170408] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.170411] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.170459] pnp: PnP ACPI: found 9 devices [ 0.177441] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.177449] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.177507] pci 0000:00:1c.0: BAR 15: assigned [mem 0x220000000-0x2201fffff 64bit pref] [ 0.177514] pci 0000:00:1c.1: BAR 15: assigned [mem 0x220200000-0x2203fffff 64bit pref] [ 0.177516] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.177520] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref] [ 0.177523] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.177526] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.177529] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff] [ 0.177532] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.177536] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.177540] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.177546] pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff] [ 0.177550] pci 0000:00:1c.0: bridge window [mem 0x220000000-0x2201fffff 64bit pref] [ 0.177558] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.177561] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.177567] pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff] [ 0.177572] pci 0000:00:1c.1: bridge window [mem 0x220200000-0x2203fffff 64bit pref] [ 0.177579] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.177582] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.177588] pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff] [ 0.177593] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.177602] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.177608] pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.177618] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.177620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.177621] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.177623] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.177624] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.177625] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window] [ 0.177627] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window] [ 0.177628] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window] [ 0.177630] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window] [ 0.177631] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window] [ 0.177632] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window] [ 0.177634] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window] [ 0.177635] pci_bus 0000:00: resource 16 [mem 0x220000000-0x417ffffff window] [ 0.177636] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.177638] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff] [ 0.177639] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.177641] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.177642] pci_bus 0000:02: resource 1 [mem 0xf1f00000-0xf1ffffff] [ 0.177643] pci_bus 0000:02: resource 2 [mem 0x220000000-0x2201fffff 64bit pref] [ 0.177645] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.177646] pci_bus 0000:03: resource 1 [mem 0xf1e00000-0xf1efffff] [ 0.177648] pci_bus 0000:03: resource 2 [mem 0x220200000-0x2203fffff 64bit pref] [ 0.177649] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.177651] pci_bus 0000:04: resource 1 [mem 0xf1c00000-0xf1dfffff] [ 0.177652] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.177653] pci_bus 0000:05: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.177655] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.177656] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.177657] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.177659] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.177660] pci_bus 0000:05: resource 8 [mem 0xe0000000-0xf7ffffff window] [ 0.177661] pci_bus 0000:05: resource 9 [mem 0xfc000000-0xfebfffff window] [ 0.177663] pci_bus 0000:05: resource 10 [mem 0xfec10000-0xfecfffff window] [ 0.177664] pci_bus 0000:05: resource 11 [mem 0xfed1c000-0xfed1ffff window] [ 0.177666] pci_bus 0000:05: resource 12 [mem 0xfed90000-0xfed9ffff window] [ 0.177667] pci_bus 0000:05: resource 13 [mem 0xfeda7000-0xfedfffff window] [ 0.177668] pci_bus 0000:05: resource 14 [mem 0xfee10000-0xff9fffff window] [ 0.177670] pci_bus 0000:05: resource 15 [mem 0xffc00000-0xffdfffff window] [ 0.177671] pci_bus 0000:05: resource 16 [mem 0x220000000-0x417ffffff window] [ 0.177753] NET: Registered protocol family 2 [ 0.177985] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.178286] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.178775] TCP: Hash tables configured (established 65536 bind 65536) [ 0.178851] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.178917] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.179038] NET: Registered protocol family 1 [ 0.180885] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.180928] PCI: CLS 64 bytes, default 64 [ 0.180976] Unpacking initramfs... [ 0.607710] Freeing initrd memory: 24660K [ 0.607721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.607725] software IO TLB [mem 0xdbe72000-0xdfe72000] (64MB) mapped at [ffff8f4d9be72000-ffff8f4d9fe71fff] [ 0.607943] Scanning for low memory corruption every 60 seconds [ 0.608354] audit: initializing netlink subsys (disabled) [ 0.608477] audit: type=2000 audit(1516319285.608:1): state=initialized audit_enabled=0 res=1 [ 0.608806] Initialise system trusted keyrings [ 0.608821] Key type blacklist registered [ 0.608870] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.610549] zbud: loaded [ 0.611023] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.611215] fuse init (API version 7.26) [ 0.613052] Key type asymmetric registered [ 0.613054] Asymmetric key parser 'x509' registered [ 0.613091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.613133] io scheduler noop registered [ 0.613135] io scheduler deadline registered [ 0.613168] io scheduler cfq registered (default) [ 0.614353] intel_idle: does not run on family 6 model 23 [ 0.614476] ACPI: AC Adapter [AC] (on-line) [ 0.762666] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.915784] ACPI: Lid Switch [LID] [ 0.915826] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.915845] ACPI: Power Button [PBTN] [ 0.915885] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.915896] ACPI: Sleep Button [SBTN] [ 0.915981] Monitor-Mwait will be used to enter C-1 state [ 0.915985] Monitor-Mwait will be used to enter C-2 state [ 0.915988] Monitor-Mwait will be used to enter C-3 state [ 0.915991] tsc: Marking TSC unstable due to TSC halts in idle [ 0.916504] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.916565] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.916567] ACPI: Thermal Zone [THM] (54 C) [ 0.916607] GHES: HEST is not enabled! [ 0.916696] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.923654] Linux agpgart interface v0.103 [ 0.930094] loop: module loaded [ 0.930219] ata_piix 0000:00:1f.1: version 2.13 [ 0.935351] ACPI: Battery Slot [BAT0] (battery present) [ 0.935914] scsi host0: ata_piix [ 0.936071] scsi host1: ata_piix [ 0.936113] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.936115] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.936201] libphy: Fixed MDIO Bus: probed [ 0.936202] tun: Universal TUN/TAP device driver, 1.6 [ 0.936238] PPP generic driver version 2.4.2 [ 0.936280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.936290] ehci-pci: EHCI PCI platform driver [ 0.936460] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.936468] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.936483] ehci-pci 0000:00:1a.7: debug port 1 [ 0.937338] ata2: port disabled--ignoring [ 0.940381] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.940461] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.947282] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.947358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.947360] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.947362] usb usb1: Product: EHCI Host Controller [ 0.947364] usb usb1: Manufacturer: Linux 4.13.0-30-lowlatency ehci_hcd [ 0.947366] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.947475] hub 1-0:1.0: USB hub found [ 0.947484] hub 1-0:1.0: 4 ports detected [ 0.947773] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.947780] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.947794] ehci-pci 0000:00:1d.7: debug port 1 [ 0.951702] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.951789] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.958259] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.958336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.958338] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.958340] usb usb2: Product: EHCI Host Controller [ 0.958342] usb usb2: Manufacturer: Linux 4.13.0-30-lowlatency ehci_hcd [ 0.958344] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.958484] hub 2-0:1.0: USB hub found [ 0.958491] hub 2-0:1.0: 6 ports detected [ 0.958667] ehci-platform: EHCI generic platform driver [ 0.958679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.958682] ohci-pci: OHCI PCI platform driver [ 0.958693] ohci-platform: OHCI generic platform driver [ 0.958702] uhci_hcd: USB Universal Host Controller Interface driver [ 0.958843] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.958848] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.958856] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.958946] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 0.959022] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.959025] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.959027] usb usb3: Product: UHCI Host Controller [ 0.959029] usb usb3: Manufacturer: Linux 4.13.0-30-lowlatency uhci_hcd [ 0.959031] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.959168] hub 3-0:1.0: USB hub found [ 0.959175] hub 3-0:1.0: 2 ports detected [ 0.959416] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.959421] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.959429] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.959503] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 0.959552] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.959555] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.959557] usb usb4: Product: UHCI Host Controller [ 0.959558] usb usb4: Manufacturer: Linux 4.13.0-30-lowlatency uhci_hcd [ 0.959560] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.959680] hub 4-0:1.0: USB hub found [ 0.959686] hub 4-0:1.0: 2 ports detected [ 0.959912] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.959918] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.959926] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.959980] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 0.960043] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.960046] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.960048] usb usb5: Product: UHCI Host Controller [ 0.960050] usb usb5: Manufacturer: Linux 4.13.0-30-lowlatency uhci_hcd [ 0.960052] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.960183] hub 5-0:1.0: USB hub found [ 0.960189] hub 5-0:1.0: 2 ports detected [ 0.960410] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.960416] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.960424] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.960491] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 0.960542] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.960545] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.960547] usb usb6: Product: UHCI Host Controller [ 0.960549] usb usb6: Manufacturer: Linux 4.13.0-30-lowlatency uhci_hcd [ 0.960551] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.960667] hub 6-0:1.0: USB hub found [ 0.960674] hub 6-0:1.0: 2 ports detected [ 0.960896] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.960901] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.960909] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.960962] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.961024] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.961027] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.961029] usb usb7: Product: UHCI Host Controller [ 0.961031] usb usb7: Manufacturer: Linux 4.13.0-30-lowlatency uhci_hcd [ 0.961033] usb usb7: SerialNumber: 0000:00:1d.2 [ 0.961141] hub 7-0:1.0: USB hub found [ 0.961148] hub 7-0:1.0: 2 ports detected [ 0.961297] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.975169] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.975204] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.975350] mousedev: PS/2 mouse device common for all mice [ 0.976085] rtc_cmos 00:03: RTC can wake from S4 [ 0.976257] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.976333] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.976341] i2c /dev entries driver [ 0.976391] device-mapper: uevent: version 1.0.3 [ 0.976474] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.976504] ledtrig-cpu: registered to indicate activity on CPUs [ 0.976898] NET: Registered protocol family 10 [ 0.983104] Segment Routing with IPv6 [ 0.983126] NET: Registered protocol family 17 [ 0.983136] Key type dns_resolver registered [ 0.983339] RAS: Correctable Errors collector initialized. [ 0.983371] microcode: sig=0x10676, pf=0x80, revision=0x60f [ 0.983425] microcode: Microcode Update Driver: v2.2. [ 0.983592] registered taskstats version 1 [ 0.983611] Loading compiled-in X.509 certificates [ 0.987392] Loaded X.509 cert 'Build time autogenerated kernel key: 96d707f05808083e64646165519855f32ed2daa8' [ 0.987410] zswap: loaded using pool lzo/zbud [ 0.992778] Key type big_key registered [ 0.992784] Key type trusted registered [ 0.995436] Key type encrypted registered [ 0.995440] AppArmor: AppArmor sha1 policy hashing enabled [ 0.995444] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.995469] evm: HMAC attrs: 0x1 [ 0.995825] Magic number: 2:550:858 [ 0.995996] rtc_cmos 00:03: setting system clock to 2018-01-18 23:48:06 UTC (1516319286) [ 0.997909] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.997911] EDD information not available. [ 0.997959] PM: Hibernation image not present or could not be loaded. [ 1.005554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.097909] ata1.00: ATAPI: MATSHITA BD-RE UJ-225S, Q310, max UDMA/33 [ 1.103265] ata1.00: configured for UDMA/33 [ 1.114515] scsi 0:0:0:0: CD-ROM MATSHITA BD-RE UJ-225S Q310 PQ: 0 ANSI: 5 [ 1.140734] sr 0:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda caddy [ 1.140740] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.140937] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.140985] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.144221] Freeing unused kernel memory: 2300K [ 1.144223] Write protecting the kernel read-only data: 18432k [ 1.145384] Freeing unused kernel memory: 2024K [ 1.145714] Freeing unused kernel memory: 92K [ 1.147734] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.147735] x86/mm: Checking user space page tables [ 1.149622] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.250024] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.250945] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.262776] acpi device:30: registered as cooling_device2 [ 1.263018] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.263021] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input5 [ 1.272018] usb 2-5: new high-speed USB device number 2 using ehci-pci [ 1.282834] ahci 0000:00:1f.2: version 3.0 [ 1.283145] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.283149] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.291041] scsi host2: ahci [ 1.294018] scsi host3: ahci [ 1.297016] scsi host4: ahci [ 1.297070] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 24 [ 1.297072] ata4: DUMMY [ 1.297075] ata5: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 24 [ 1.312609] nouveau 0000:01:00.0: NVIDIA G84 (084700a2) [ 1.348461] nouveau 0000:01:00.0: bios: version 60.84.5e.00.08 [ 1.351890] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 1.370287] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 [ 1.386153] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 [ 1.386157] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.386159] usb 1-1: Product: Laptop Integrated Webcam [ 1.386161] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 [ 1.398732] usb 2-5: New USB device found, idVendor=03f0, idProduct=3a1d [ 1.398735] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.398737] usb 2-5: Product: HP hs2340 HSPA+ MobileBroadband [ 1.398739] usb 2-5: Manufacturer: HP [ 1.398741] usb 2-5: SerialNumber: 389AAF3EB2A222D0 [ 1.420447] [TTM] Zone kernel: Available graphics memory: 3952582 kiB [ 1.420450] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.420451] [TTM] Initializing pool allocator [ 1.420457] [TTM] Initializing DMA pool allocator [ 1.420472] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB [ 1.420474] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.420479] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.420481] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.420483] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034 [ 1.420486] nouveau 0000:01:00.0: DRM: DCB outp 01: 02012300 00000028 [ 1.420488] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021312 00020010 [ 1.420490] nouveau 0000:01:00.0: DRM: DCB outp 03: 010333f1 00c0c080 [ 1.420492] nouveau 0000:01:00.0: DRM: DCB conn 00: 0040 [ 1.420494] nouveau 0000:01:00.0: DRM: DCB conn 01: 1161 [ 1.420496] nouveau 0000:01:00.0: DRM: DCB conn 02: 0200 [ 1.420498] nouveau 0000:01:00.0: DRM: DCB conn 03: 0310 [ 1.420500] nouveau 0000:01:00.0: DRM: DCB conn 04: 0311 [ 1.420502] nouveau 0000:01:00.0: DRM: DCB conn 05: 0313 [ 1.429620] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 1.429622] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 1.430019] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.430021] [drm] Driver supports precise vblank timestamp query. [ 1.448654] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 1.631063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256196c667b, max_idle_ns: 440795249025 ns [ 1.672592] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x70000, bo ffff8f4ed09df800 [ 1.674099] fbcon: nouveaufb (fb0) is primary device [ 1.677746] Console: switching to colour frame buffer device 240x75 [ 1.677797] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 1.683054] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 1.843995] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.844029] ata5: SATA link down (SStatus 0 SControl 300) [ 1.845663] ata3.00: supports DRM functions and may not be fully accessible [ 1.846129] ata3.00: NCQ Send/Recv Log not supported [ 1.846131] ata3.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133 [ 1.846133] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.847395] ata3.00: supports DRM functions and may not be fully accessible [ 1.847799] ata3.00: NCQ Send/Recv Log not supported [ 1.848765] ata3.00: configured for UDMA/133 [ 1.848934] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.856268] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.856284] sd 2:0:0:0: [sda] Write Protect is off [ 1.856287] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.856311] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.856563] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.858911] sda: sda1 sda2 sda3 sda4 sda5 [ 1.859650] sd 2:0:0:0: [sda] supports TCG Opal [ 1.859653] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.940052] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 1.948043] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2.104108] usb 3-2: New USB device found, idVendor=0483, idProduct=2016 [ 2.104111] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.104113] usb 3-2: Product: Biometric Coprocessor [ 2.104115] usb 3-2: Manufacturer: STMicroelectronics [ 2.111094] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.111097] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.111099] usb 7-2: Product: BCM2045B2 [ 2.111101] usb 7-2: Manufacturer: Broadcom [ 2.113124] hub 7-2:1.0: USB hub found [ 2.115097] hub 7-2:1.0: 3 ports detected [ 2.403044] usb 7-2.1: new full-speed USB device number 3 using uhci_hcd [ 2.519104] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 [ 2.519107] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.519109] usb 7-2.1: Product: BCM2045 [ 2.519111] usb 7-2.1: Manufacturer: Broadcom Corp [ 2.590051] usb 7-2.2: new full-speed USB device number 4 using uhci_hcd [ 2.718099] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 2.718102] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 2.718105] usb 7-2.2: Manufacturer: Broadcom Corp [ 2.794042] usb 7-2.3: new full-speed USB device number 5 using uhci_hcd [ 2.794057] raid6: sse2x1 gen() 4147 MB/s [ 2.806035] raid6: sse2x1 xor() 4230 MB/s [ 2.818035] raid6: sse2x2 gen() 4788 MB/s [ 2.830028] raid6: sse2x2 xor() 5130 MB/s [ 2.842025] raid6: sse2x4 gen() 7256 MB/s [ 2.854028] raid6: sse2x4 xor() 5671 MB/s [ 2.854030] raid6: using algorithm sse2x4 gen() 7256 MB/s [ 2.854031] raid6: .... xor() 5671 MB/s, rmw enabled [ 2.854033] raid6: using ssse3x2 recovery algorithm [ 2.855294] async_tx: api initialized (async) [ 2.856557] xor: measuring software checksum speed [ 2.866014] prefetch64-sse: 10144.000 MB/sec [ 2.876016] generic_sse: 9004.000 MB/sec [ 2.876018] xor: using function: prefetch64-sse (10144.000 MB/sec) [ 3.103893] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 3.103897] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 3.103899] usb 7-2.3: Manufacturer: Broadcom Corp [ 5.457683] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 5.679773] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.679924] systemd[1]: Detected architecture x86-64. [ 5.685208] systemd[1]: Set hostname to . [ 5.916029] systemd[1]: Created slice User and Session Slice. [ 5.916450] systemd[1]: Created slice System Slice. [ 5.916544] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.916655] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.916752] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 5.916829] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.916945] systemd[1]: Listening on Journal Socket. [ 6.032103] RPC: Registered named UNIX socket transport module. [ 6.032107] RPC: Registered udp transport module. [ 6.032109] RPC: Registered tcp transport module. [ 6.032110] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.076825] lp: driver loaded but no devices found [ 6.087347] ppdev: user-space parallel port driver [ 6.099975] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.115577] Loading iSCSI transport class v2.0-870. [ 6.132577] iscsi: registered transport (tcp) [ 6.180938] iscsi: registered transport (iser) [ 6.270538] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 7.054224] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.071892] sky2: driver version 1.30 [ 7.072068] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0 [ 7.076411] sky2 0000:02:00.0 eth0: addr 00:21:9b:d5:40:84 [ 7.135885] sdhci: Secure Digital Host Controller Interface driver [ 7.135887] sdhci: Copyright(c) Pierre Ossman [ 7.140978] sdhci-pci 0000:05:09.1: SDHCI controller found [1180:0822] (rev 22) [ 7.159110] mmc0: SDHCI controller on PCI [0000:05:09.1] using DMA [ 7.215070] firewire_ohci 0000:05:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 7.221063] r592: driver successfully loaded [ 7.257037] r852: driver loaded successfully [ 7.257760] media: Linux media interface: v0.10 [ 7.286715] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 7.286716] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 7.286782] iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 7.286962] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 7.330875] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.336601] Linux video capture interface: v2.00 [ 7.353816] dell_wmi: Detected Dell WMI interface version 1 [ 7.353875] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7 [ 7.361736] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 7.361749] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 7.376275] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24 [ 7.412360] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 7.529913] intel_powerclamp: No package C-state available [ 7.557044] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 7.560027] uvcvideo 1-1:1.0: Entity type for entity Processing 5 was not initialized! [ 7.560029] uvcvideo 1-1:1.0: Entity type for entity Extension 6 was not initialized! [ 7.560031] uvcvideo 1-1:1.0: Entity type for entity Selector 4 was not initialized! [ 7.560033] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized! [ 7.560034] uvcvideo 1-1:1.0: Entity type for entity Extension 7 was not initialized! [ 7.561115] input: Laptop Integrated Webcam: Lapto as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8 [ 7.589938] usbcore: registered new interface driver uvcvideo [ 7.589940] USB Video Class driver (1.1.1) [ 7.619221] hidraw: raw HID events driver (C) Jiri Kosina [ 7.623808] snd_hda_codec_idt hdaudioC0D2: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 7.623810] snd_hda_codec_idt hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.623812] snd_hda_codec_idt hdaudioC0D2: hp_outs=2 (0xf/0xa/0x0/0x0/0x0) [ 7.623813] snd_hda_codec_idt hdaudioC0D2: mono: mono_out=0x0 [ 7.623815] snd_hda_codec_idt hdaudioC0D2: dig-out=0x21/0x0 [ 7.623816] snd_hda_codec_idt hdaudioC0D2: inputs: [ 7.623818] snd_hda_codec_idt hdaudioC0D2: Internal Mic=0x13 [ 7.623819] snd_hda_codec_idt hdaudioC0D2: Mic=0xe [ 7.686423] usbcore: registered new interface driver usbhid [ 7.686425] usbhid: USB HID core driver [ 7.704454] Bluetooth: Core ver 2.22 [ 7.704477] NET: Registered protocol family 31 [ 7.704478] Bluetooth: HCI device and connection manager initialized [ 7.704481] Bluetooth: HCI socket layer initialized [ 7.704484] Bluetooth: L2CAP socket layer initialized [ 7.704491] Bluetooth: SCO socket layer initialized [ 7.719771] firewire_core 0000:05:09.0: created device fw0: GUID 464fc0002f846c70, S400 [ 7.750121] usbcore: registered new interface driver btusb [ 7.835286] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.835359] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.036947] random: crng init done [ 8.184078] sky2 0000:02:00.0 enp2s0: renamed from eth0 [ 8.272235] iwl4965 0000:03:00.0 wlp3s0: renamed from wlan0 [ 8.311979] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 8.340609] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/0003:0A5C:4502.0001/input/input11 [ 8.389357] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 8.398029] hid-generic 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 8.398387] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/0003:0A5C:4503.0002/input/input12 [ 8.401086] hid-generic 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 8.445270] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 8.498779] systemd-journald[617]: Received request to flush runtime journal from PID 1 [ 8.584198] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 9.203954] cdc_acm 2-5:1.1: ttyACM0: USB ACM device [ 9.204467] cdc_acm 2-5:1.3: ttyACM1: USB ACM device [ 9.204907] cdc_acm 2-5:1.9: ttyACM2: USB ACM device [ 9.206098] usbcore: registered new interface driver cdc_acm [ 9.206099] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 9.223892] cdc_wdm 2-5:1.5: cdc-wdm0: USB WDM device [ 9.223956] cdc_wdm 2-5:1.8: cdc-wdm1: USB WDM device [ 9.225065] usbcore: registered new interface driver cdc_wdm [ 9.257965] cdc_ncm 2-5:1.6: MAC-Address: 02:80:37:ec:02:00 [ 9.266372] cdc_ncm 2-5:1.6 usb0: register 'cdc_ncm' at usb-0000:00:1d.7-5, CDC NCM, 02:80:37:ec:02:00 [ 9.271097] usbcore: registered new interface driver cdc_ncm [ 9.277000] usbcore: registered new interface driver cdc_mbim [ 9.309959] cdc_ncm 2-5:1.6 enp0s29f7u5i6: renamed from usb0 [ 9.800804] NET: Registered protocol family 38 [ 10.972251] EXT4-fs (dm-5): mounting ext3 file system using the ext4 subsystem [ 10.979899] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 11.409398] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 11.426605] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 11.774615] audit: type=1400 audit(1516319297.278:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1552 comm="apparmor_parser" [ 11.774753] audit: type=1400 audit(1516319297.278:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1552 comm="apparmor_parser" [ 11.774846] audit: type=1400 audit(1516319297.278:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1552 comm="apparmor_parser" [ 11.774915] audit: type=1400 audit(1516319297.278:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1552 comm="apparmor_parser" [ 11.786661] audit: type=1400 audit(1516319297.290:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1551 comm="apparmor_parser" [ 11.786785] audit: type=1400 audit(1516319297.290:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1551 comm="apparmor_parser" [ 11.808584] audit: type=1400 audit(1516319297.312:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1556 comm="apparmor_parser" [ 11.808775] audit: type=1400 audit(1516319297.312:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1556 comm="apparmor_parser" [ 11.808848] audit: type=1400 audit(1516319297.312:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1556 comm="apparmor_parser" [ 11.808915] audit: type=1400 audit(1516319297.312:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1556 comm="apparmor_parser" [ 12.086235] new mount options do not match the existing superblock, will be ignored [ 12.549243] new mount options do not match the existing superblock, will be ignored [ 12.718642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.718644] Bluetooth: BNEP filters: protocol multicast [ 12.718648] Bluetooth: BNEP socket layer initialized [ 13.015029] Bluetooth: RFCOMM TTY layer initialized [ 13.015037] Bluetooth: RFCOMM socket layer initialized [ 13.015043] Bluetooth: RFCOMM ver 1.11 [ 13.115844] cdc_wdm 2-5:1.5: wdm_int_callback - 0 bytes [ 13.359319] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 13.359579] NFSD: starting 90-second grace period (net ffffffff97628c80) [ 13.532447] 8021q: 802.1Q VLAN Support v1.8 [ 13.541244] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 13.548207] sky2 0000:02:00.0 enp2s0: enabling interface [ 13.548382] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 13.548433] IPv6: ADDRCONF(NETDEV_UP): vlan99: link is not ready [ 13.574964] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u5i6: link is not ready [ 13.576358] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u5i6: link is not ready [ 13.581858] cdc_ncm 2-5:1.6 enp0s29f7u5i6: network connection: disconnected [ 13.589841] cdc_ncm 2-5:1.6 enp0s29f7u5i6: network connection: disconnected [ 13.591790] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 13.861800] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 14.059863] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 14.474726] IPv6: ADDRCONF(NETDEV_UP): vlan99: link is not ready [ 16.292953] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx [ 16.292972] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 16.293143] IPv6: ADDRCONF(NETDEV_CHANGE): vlan99: link becomes ready [ 18.152119] wlp3s0: authenticate with 28:28:5d:07:76:09 [ 18.171919] wlp3s0: send auth to 28:28:5d:07:76:09 (try 1/3) [ 18.173859] wlp3s0: authenticated [ 18.175046] wlp3s0: associate with 28:28:5d:07:76:09 (try 1/3) [ 18.178832] wlp3s0: RX AssocResp from 28:28:5d:07:76:09 (capab=0x411 status=0 aid=6) [ 18.206433] wlp3s0: associated [ 18.206494] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 18.241651] iwl4965 0000:03:00.0: Enabling power save might cause firmware crashes [ 20.299048] wlp3s0: deauthenticating from 28:28:5d:07:76:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 22.555259] wlp3s0: authenticate with 28:28:5d:07:76:09 [ 22.555346] wlp3s0: send auth to 28:28:5d:07:76:09 (try 1/3) [ 22.557191] wlp3s0: authenticated [ 22.558027] wlp3s0: associate with 28:28:5d:07:76:09 (try 1/3) [ 22.561985] wlp3s0: RX AssocResp from 28:28:5d:07:76:09 (capab=0x411 status=0 aid=6) [ 22.585760] wlp3s0: associated [ 25.080710] wlp3s0: deauthenticating from 28:28:5d:07:76:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 27.163334] wlp3s0: authenticate with 28:28:5d:07:76:09 [ 27.163422] wlp3s0: send auth to 28:28:5d:07:76:09 (try 1/3) [ 27.165301] wlp3s0: authenticated [ 27.166026] wlp3s0: associate with 28:28:5d:07:76:09 (try 1/3) [ 27.169776] wlp3s0: RX AssocResp from 28:28:5d:07:76:09 (capab=0x411 status=0 aid=6) [ 27.195819] wlp3s0: associated [ 30.111110] wlp3s0: deauthenticating from 28:28:5d:07:76:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 32.180497] wlp3s0: authenticate with 28:28:5d:07:76:09 [ 32.180579] wlp3s0: send auth to 28:28:5d:07:76:09 (try 1/3) [ 32.182444] wlp3s0: authenticated [ 32.183025] wlp3s0: associate with 28:28:5d:07:76:09 (try 1/3) [ 32.186756] wlp3s0: RX AssocResp from 28:28:5d:07:76:09 (capab=0x411 status=0 aid=6) [ 32.213815] wlp3s0: associated [ 34.096104] wlp3s0: deauthenticating from 28:28:5d:07:76:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 36.174033] wlp3s0: authenticate with 28:28:5d:07:76:0a [ 36.183213] wlp3s0: send auth to 28:28:5d:07:76:0a (try 1/3) [ 36.185369] wlp3s0: send auth to 28:28:5d:07:76:0a (try 2/3) [ 36.354492] wlp3s0: authenticated [ 36.355051] wlp3s0: associate with 28:28:5d:07:76:0a (try 1/3) [ 36.356639] wlp3s0: RX AssocResp from 28:28:5d:07:76:0a (capab=0x11 status=0 aid=1) [ 36.381501] wlp3s0: associated [ 39.074402] wlp3s0: deauthenticating from 28:28:5d:07:76:0a by local choice (Reason: 3=DEAUTH_LEAVING) [ 41.192739] wlp3s0: authenticate with 28:28:5d:07:76:0a [ 41.201843] wlp3s0: send auth to 28:28:5d:07:76:0a (try 1/3) [ 41.203972] wlp3s0: send auth to 28:28:5d:07:76:0a (try 2/3) [ 41.372092] wlp3s0: authenticated [ 41.373086] wlp3s0: associate with 28:28:5d:07:76:0a (try 1/3) [ 41.374514] wlp3s0: RX AssocResp from 28:28:5d:07:76:0a (capab=0x11 status=0 aid=1) [ 41.397737] wlp3s0: associated [ 44.195946] ip_tables: (C) 2000-2006 Netfilter Core Team [ 44.248854] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 44.358711] IPv6: ADDRCONF(NETDEV_UP): lxcbr0: link is not ready [ 44.559860] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 44.736466] kauditd_printk_skb: 24 callbacks suppressed [ 44.736467] audit: type=1400 audit(1516319330.236:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=2676 comm="apparmor_parser" [ 44.959667] audit: type=1400 audit(1516319330.463:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=2685 comm="apparmor_parser" [ 44.960266] audit: type=1400 audit(1516319330.464:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=2685 comm="apparmor_parser" [ 44.960276] audit: type=1400 audit(1516319330.464:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=2685 comm="apparmor_parser" [ 44.960286] audit: type=1400 audit(1516319330.464:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=2685 comm="apparmor_parser" [ 45.301364] wlp3s0: deauthenticating from 28:28:5d:07:76:0a by local choice (Reason: 3=DEAUTH_LEAVING) [ 47.604449] wlp3s0: authenticate with 28:28:5d:07:76:0a [ 47.613429] wlp3s0: send auth to 28:28:5d:07:76:0a (try 1/3) [ 47.615526] wlp3s0: send auth to 28:28:5d:07:76:0a (try 2/3) [ 47.720633] wlp3s0: authenticated [ 47.721161] wlp3s0: associate with 28:28:5d:07:76:0a (try 1/3) [ 47.722700] wlp3s0: RX AssocResp from 28:28:5d:07:76:0a (capab=0x11 status=0 aid=1) [ 47.744627] wlp3s0: associated [ 49.562744] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 50.188566] Ebtables v2.0 registered [ 51.836559] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 51.836564] Bluetooth: HIDP socket layer initialized [ 51.837369] hid-generic 0005:046D:B002.0003: unknown main item tag 0x0 [ 51.837442] input: Bluetooth Travel Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.0/bluetooth/hci0/hci0:11/0005:046D:B002.0003/input/input13 [ 51.839106] hid-generic 0005:046D:B002.0003: input,hidraw2: BLUETOOTH HID v48.09 Mouse [Bluetooth Travel Mouse] on 00:1f:3a:e0:0a:af [ 53.024415] wlp3s0: deauthenticating from 28:28:5d:07:76:0a by local choice (Reason: 3=DEAUTH_LEAVING) [ 53.238104] virbr0: port 1(virbr0-nic) entered blocking state [ 53.238116] virbr0: port 1(virbr0-nic) entered disabled state [ 53.238171] device virbr0-nic entered promiscuous mode [ 55.185043] wlp3s0: authenticate with 28:28:5d:07:76:0a [ 55.193966] wlp3s0: send auth to 28:28:5d:07:76:0a (try 1/3) [ 55.196093] wlp3s0: send auth to 28:28:5d:07:76:0a (try 2/3) [ 55.298196] wlp3s0: authenticated [ 55.299042] wlp3s0: associate with 28:28:5d:07:76:0a (try 1/3) [ 55.300580] wlp3s0: RX AssocResp from 28:28:5d:07:76:0a (capab=0x11 status=0 aid=1) [ 55.321977] wlp3s0: associated [ 59.940470] wlp3s0: deauthenticating from 28:28:5d:07:76:0a by local choice (Reason: 3=DEAUTH_LEAVING) [ 62.593655] hid-generic 0005:05AC:0209.0004: unknown main item tag 0x0 [ 62.593765] input: Apple Wireless Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.0/bluetooth/hci0/hci0:12/0005:05AC:0209.0004/input/input14 [ 62.594031] hid-generic 0005:05AC:0209.0004: input,hidraw3: BLUETOOTH HID v1.10 Keyboard [Apple Wireless Keyboard] on 00:1f:3a:e0:0a:af [ 62.607401] virbr0: port 1(virbr0-nic) entered blocking state [ 62.607405] virbr0: port 1(virbr0-nic) entered listening state [ 64.671047] virbr0: port 1(virbr0-nic) entered learning state [ 65.506282] virbr0: port 1(virbr0-nic) entered disabled state [ 65.510821] device virbr0-nic left promiscuous mode [ 65.510962] virbr0: port 1(virbr0-nic) entered disabled state [ 137.654751] wlp3s0: authenticate with 28:28:5d:07:76:09 [ 137.662813] wlp3s0: send auth to 28:28:5d:07:76:09 (try 1/3) [ 137.664652] wlp3s0: authenticated [ 137.666025] wlp3s0: associate with 28:28:5d:07:76:09 (try 1/3) [ 137.671340] wlp3s0: RX AssocResp from 28:28:5d:07:76:09 (capab=0x411 status=0 aid=6) [ 137.695722] wlp3s0: associated [ 158.018072] wlp3s0: deauthenticating from 28:28:5d:07:76:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 158.198585] sky2 0000:02:00.0 enp2s0: disabling interface [ 158.265456] PM: Syncing filesystems ... done. [ 158.280781] PM: Preparing system for sleep (mem) [ 158.281497] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 158.284095] OOM killer disabled. [ 158.284096] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 158.285201] PM: Suspending system (mem) [ 158.285216] Suspending console(s) (use no_console_suspend to debug) [ 158.286436] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 158.287416] sd 2:0:0:0: [sda] Stopping disk [ 158.310182] nouveau 0000:01:00.0: DRM: suspending console... [ 158.310188] nouveau 0000:01:00.0: DRM: suspending display... [ 159.328288] nouveau 0000:01:00.0: DRM: evicting buffers... [ 159.983571] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [ 159.983580] nouveau 0000:01:00.0: DRM: suspending fence... [ 159.983802] nouveau 0000:01:00.0: DRM: suspending object tree... [ 161.633535] PM: suspend of devices complete after 3347.989 msecs [ 161.634414] PM: late suspend of devices complete after 0.874 msecs [ 161.791126] PM: noirq suspend of devices complete after 156.709 msecs [ 161.792154] ACPI: Preparing to enter system sleep state S3 [ 161.796658] PM: Saving platform NVS memory [ 161.796660] Disabling non-boot CPUs ... [ 161.806718] IRQ 1: no longer affine to CPU1 [ 161.806730] IRQ 12: no longer affine to CPU1 [ 161.806734] IRQ 14: no longer affine to CPU1 [ 161.806751] IRQ 20: no longer affine to CPU1 [ 161.806759] IRQ 22: no longer affine to CPU1 [ 161.806762] IRQ 24: no longer affine to CPU1 [ 161.806765] IRQ 27: no longer affine to CPU1 [ 161.807786] smpboot: CPU 1 is now offline [ 161.811020] ACPI: Low-level resume complete [ 161.811020] PM: Restoring platform NVS memory [ 161.811020] Suspended for 12.533 seconds [ 161.822715] Enabling non-boot CPUs ... [ 161.822841] x86: Booting SMP configuration: [ 161.822842] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 161.836579] cache: parent cpu1 should not be sleeping [ 161.839136] CPU1 is up [ 161.845075] ACPI: Waking up from system sleep state S3 [ 161.866185] firewire_ohci 0000:05:09.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 161.866188] firewire_ohci 0000:05:09.0: MMC cards are now supported by standard SDHCI controller [ 162.007415] PM: noirq resume of devices complete after 153.554 msecs [ 162.010668] PM: early resume of devices complete after 3.213 msecs [ 162.011141] nouveau 0000:01:00.0: DRM: resuming object tree... [ 162.011425] iwl4965 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 162.011428] iwl4965 0000:03:00.0: On demand firmware reload [ 162.011748] ata2: port disabled--ignoring [ 162.011956] ieee80211 phy0: Hardware restart was requested [ 162.037938] usb usb3: root hub lost power or was reset [ 162.179828] ACPI: button: The lid device is not compliant to SW_LID. [ 162.183310] usb usb5: root hub lost power or was reset [ 162.213163] usb usb6: root hub lost power or was reset [ 162.226483] usb usb4: root hub lost power or was reset [ 162.226664] usb usb7: root hub lost power or was reset [ 162.229127] sd 2:0:0:0: [sda] Starting disk [ 162.353042] nouveau 0000:01:00.0: DRM: resuming fence... [ 162.353054] nouveau 0000:01:00.0: DRM: resuming display... [ 162.447294] nouveau 0000:01:00.0: DRM: resuming console... [ 162.493571] ata5: SATA link down (SStatus 0 SControl 300) [ 162.493615] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 162.493983] ata3.00: supports DRM functions and may not be fully accessible [ 162.506782] ata3.00: NCQ Send/Recv Log not supported [ 162.508294] ata3.00: supports DRM functions and may not be fully accessible [ 162.508738] ata3.00: NCQ Send/Recv Log not supported [ 162.509765] ata3.00: configured for UDMA/133 [ 162.551207] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [ 162.567248] usb 7-2: reset full-speed USB device number 2 using uhci_hcd [ 162.661158] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 162.687223] firewire_core 0000:05:09.0: rediscovered device fw0 [ 162.759223] ata1.00: configured for UDMA/33 [ 162.994223] usb 7-2.1: reset full-speed USB device number 3 using uhci_hcd [ 163.151207] usb 7-2.3: reset full-speed USB device number 5 using uhci_hcd [ 163.310230] usb 7-2.2: reset full-speed USB device number 4 using uhci_hcd [ 163.426232] usb 2-5: reset high-speed USB device number 2 using ehci-pci [ 163.581864] PM: resume of devices complete after 1571.185 msecs [ 163.582124] usb 7-2.1:1.0: rebind failed: -517 [ 163.582131] usb 7-2.1:1.1: rebind failed: -517 [ 163.582609] PM: Finishing wakeup. [ 163.582610] OOM killer enabled. [ 163.582611] Restarting tasks ... [ 163.587826] cdc_ncm 2-5:1.6 enp0s29f7u5i6: network connection: disconnected [ 163.643024] done. [ 163.741025] video LNXVIDEO:00: Restoring backlight state [ 163.956877] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 163.961435] sky2 0000:02:00.0 enp2s0: enabling interface [ 163.963085] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 163.963180] IPv6: ADDRCONF(NETDEV_UP): vlan99: link is not ready [ 163.976417] IPv6: ADDRCONF(NETDEV_UP): vlan99: link is not ready [ 163.980744] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 164.228973] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 164.289961] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 166.530254] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx [ 166.530276] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 166.530483] IPv6: ADDRCONF(NETDEV_CHANGE): vlan99: link becomes ready [ 167.354934] cdc_wdm 2-5:1.5: wdm_int_callback - 0 bytes [ 168.387428] wlp3s0: authenticate with 28:28:5d:07:76:09 [ 168.387588] wlp3s0: send auth to 28:28:5d:07:76:09 (try 1/3) [ 168.389488] wlp3s0: authenticated [ 168.391031] wlp3s0: associate with 28:28:5d:07:76:09 (try 1/3) [ 168.395032] wlp3s0: RX AssocResp from 28:28:5d:07:76:09 (capab=0x411 status=0 aid=6) [ 168.423527] wlp3s0: associated [ 168.423654] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready