Redpine: Wifi/BT not functioning after s3 resume

Bug #1742090 reported by Amitkumar Karwar on 2018-01-09
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
HWE Next
Undecided
Unassigned
linux (Ubuntu)
Critical
Unassigned
Xenial
Critical
Unassigned

Bug Description

System cannot be waked by wowlan, but sometimes works.
When the wowlan not works and system waked by other wakeup sources, after resume the wifi and BT would not functioning until reload driver.

The driver/FW info:
[ 395.217187] ven_rsi_91x: ================ RSI Version Info ==============
[ 395.217188] ven_rsi_91x: ================================================
[ 395.217192] ven_rsi_91x: FW Version : 1.5.4
[ 395.217198] ven_rsi_91x: Driver Version : RS9113.NB0.NL.GNU.LNX.1.2
[ 395.217200] ven_rsi_91x: Operating mode : 13 [Wi-Fi STA + BT DUAL]
[ 395.217201] ven_rsi_91x: Firmware file : RS9113_WLAN_BT_DUAL_MODE.rps
[ 395.217202] ven_rsi_91x: ================================================

Kernel version: 4.4.0-98-generic
Kernel snap: caracalla-kernel version:4.4.0-98.121-1 revision:58
BIOS version: 01.00.05 (Also tested with 01.00.03)
Tested SKU: T, Media, GPA

The reproduce steps:
1. Enable Wowlan and Wol in BIOS
2. Boot up Ubuntu core
3. Connect to Wifi AP
    $ nmcli d wifi connect <my ssid> password <my password>
4. Enable wowlan
    $ sudo iw phy phy0 wowlan enable magic-packet
5. Enter suspend or hibernate
    $ sudo systemctl suspend
    or
    $ sudo systemctl hibernate
6. Send wake signal from another machine
    # wakeonlan <Wifi MAC>
    or
    # sudo etherwake <Wifi MAC>
7. If system not waked, try to wol or other wake source
    # wakeonlan <Ethernet MAC>
8. After resume, check the wifi/BT function, but not functioning.
    $ nmcli dev
        DEVICE TYPE STATE CONNECTION
        eth0 ethernet connected Wired connection 1
        wlan0 wifi disconnected --
        eth1 ethernet unavailable --
        cdc-wdm0 gsm unavailable --
        lo loopback unmanaged --
    $ nmcli dev wifi rescan
    $ nmcli dev wfii list
    No wifi APs found

    $ sudo bluetoothctl
        [NEW] Controller 00:23:A7:EA:65:64 0225399 [default]
        [bluetooth]# power on
        Failed to set power on: org.bluez.Error.Failed

The not functioning issue can be fixed by reload driver.
Also hibernate wakeup fails, and wake by other wake source. The Wifi/BT still functioning which could be the FW is reloaded by driver.

This bug is only for tracking purporse, please do not triage.

This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:

apport-collect 1742090

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

Changed in linux (Ubuntu):
status: New → Incomplete
description: updated
Changed in linux (Ubuntu):
status: Incomplete → Confirmed
importance: Undecided → Critical
summary: - Wifi/BT not functioning after s3 resume
+ Redpine: Wifi/BT not functioning after s3 resume
tags: added: originate-from-1738169 plano
Changed in linux (Ubuntu Xenial):
status: New → Confirmed
importance: Undecided → Critical
Changed in linux (Ubuntu Xenial):
status: Confirmed → Fix Committed
Stefan Bader (smb) wrote :

This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-xenial' to 'verification-done-xenial'. If the problem still exists, change the tag 'verification-needed-xenial' to 'verification-failed-xenial'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

tags: added: verification-needed-xenial
Launchpad Janitor (janitor) wrote :
Download full text (56.9 KiB)

This bug was fixed in the package linux - 4.4.0-119.143

---------------
linux (4.4.0-119.143) xenial; urgency=medium

  * linux: 4.4.0-119.143 -proposed tracker (LP: #1760327)

  * Dell XPS 13 9360 bluetooth scan can not detect any device (LP: #1759821)
    - Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"

linux (4.4.0-118.142) xenial; urgency=medium

  * linux: 4.4.0-118.142 -proposed tracker (LP: #1759607)

  * Kernel panic with AWS 4.4.0-1053 / 4.4.0-1015 (Trusty) (LP: #1758869)
    - x86/microcode/AMD: Do not load when running on a hypervisor

  * CVE-2018-8043
    - net: phy: mdio-bcm-unimac: fix potential NULL dereference in
      unimac_mdio_probe()

linux (4.4.0-117.141) xenial; urgency=medium

  * linux: 4.4.0-117.141 -proposed tracker (LP: #1755208)

  * Xenial update to 4.4.114 stable release (LP: #1754592)
    - x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels
    - usbip: prevent vhci_hcd driver from leaking a socket pointer address
    - usbip: Fix implicit fallthrough warning
    - usbip: Fix potential format overflow in userspace tools
    - x86/microcode/intel: Fix BDW late-loading revision check
    - x86/retpoline: Fill RSB on context switch for affected CPUs
    - sched/deadline: Use the revised wakeup rule for suspending constrained dl
      tasks
    - can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once
    - can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once
    - PM / sleep: declare __tracedata symbols as char[] rather than char
    - time: Avoid undefined behaviour in ktime_add_safe()
    - timers: Plug locking race vs. timer migration
    - Prevent timer value 0 for MWAITX
    - drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled
    - drivers: base: cacheinfo: fix boot error message when acpi is enabled
    - PCI: layerscape: Add "fsl,ls2085a-pcie" compatible ID
    - PCI: layerscape: Fix MSG TLP drop setting
    - mmc: sdhci-of-esdhc: add/remove some quirks according to vendor version
    - fs/select: add vmalloc fallback for select(2)
    - hwpoison, memcg: forcibly uncharge LRU pages
    - cma: fix calculation of aligned offset
    - mm, page_alloc: fix potential false positive in __zone_watermark_ok
    - ipc: msg, make msgrcv work with LONG_MIN
    - x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
    - ACPI / processor: Avoid reserving IO regions too early
    - ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
    - ACPICA: Namespace: fix operand cache leak
    - netfilter: x_tables: speed up jump target validation
    - netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed
      in 64bit kernel
    - netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flags
    - netfilter: nf_ct_expect: remove the redundant slash when policy name is
      empty
    - netfilter: nfnetlink_queue: reject verdict request from different portid
    - netfilter: restart search if moved to other chain
    - netfilter: nf_conntrack_sip: extend request line validation
    - netfilter: use fwmark_reflect in nf_send_reset
    - ext2: Don't clear SGID when inheriting ACLs
    - reiserfs: fix race in prealloc discard
    - re...

Changed in linux (Ubuntu Xenial):
status: Fix Committed → Fix Released
To post a comment you must log in.
This report contains Public information  Edit
Everyone can see this information.

Other bug subscribers