Hello   Not tested under AMD64   My problem is to have a graphic processor on a (old pentium) computer without agp port to be able to edit video.   I made the choice to have in this secondary house an old (at very low cost) desktop computer with a comfortable 24' screen and to travel with an usb key (lighter than a portable computer)   And my (Main use at home) is an AMD64 with graphic processor on video card   I looked at my notes about this computer   with nvidia proprietary driver, had problem with nouveau, worked with screen connected with VGA cable, but not correctly centered (something like colomn 1 outside the screen) with nouveau, connected with DVI cable, had problem   file (copied month ago) /var/log/Xorg.0.log   contained (key elements i noted) 18.759] (--) PCI: (0:3:9:0) 10de:0221:0000:0000 rev 161, Mem @ 0x94000000/16777216, 0xc0000000/536870912, 0x92000000/16777216, BIOS @ 0x????????/131072 [    18.806] (==) Matched nvidia as autoconfigured driver 1 [    18.806] (==) Matched nouveau as autoconfigured driver 2 [    18.810] (II) LoadModule: "nvidia" [    18.814] (WW) Warning, couldn't open module nvidia [    18.814] (II) UnloadModule: "nvidia" [    18.815] (II) Unloading nvidia [    18.815] (EE) Failed to load module "nvidia" (module does not exist, 0) [    18.815] (II) LoadModule: "nouveau" [    18.819] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [    18.825] (II) Module nouveau: vendor="X.Org Foundation" [    18.825]     compiled for 1.15.0, module version = 1.0.10 [    18.826]     Module class: X.Org Video Driver [    18.826]     ABI class: X.Org Video Driver, version 15.0   So, wrong detection at 18.759 before loading nividia and nouveau 0xc0000000/536870912 adresse correct , but size 536870912 = 512Mo incorrect   searched in the source i was able to find, arrived at   nouveau_device_get_param(struct nouveau_device *dev,              uint64_t param, uint64_t *value) {     struct nouveau_device_priv *nvdev = nouveau_device(dev);     struct drm_nouveau_getparam g;     int ret;     if (!nvdev || !value)         return -EINVAL;     g.param = param;     ret = drmCommandWriteRead(nvdev->fd, DRM_NOUVEAU_GETPARAM,                   &g, sizeof(g));     if (ret)         return ret;     *value = g.value;     return 0; } attempted to limit use of memory, using, VideoRam 262144 but not succeeded   For me, the goog thing to do is to be able to recover the information obtained at hardware level   done lspci jean@jean-Soisy:~$ lspci -v -s 03:09.0 03:09.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])     Flags: bus master, 66MHz, medium devsel, latency 40, IRQ 21     Memory at 94000000 (32-bit, non-prefetchable) [size=16M]     Memory at c0000000 (32-bit, prefetchable) [size=512M]     Memory at 92000000 (32-bit, non-prefetchable) [size=16M]     [virtual] Expansion ROM at e0000000 [disabled] [size=128K]     Capabilities:     Kernel driver in use: nouveau   done lspci in verbose mode jean@jean-Soisy:~$ sudo lspci -v -k -x -s 03:09.0 03:09.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])     Flags: bus master, 66MHz, medium devsel, latency 40, IRQ 21     Memory at 94000000 (32-bit, non-prefetchable) [size=16M]     Memory at c0000000 (32-bit, prefetchable) [size=512M]     Memory at 92000000 (32-bit, non-prefetchable) [size=16M]     [virtual] Expansion ROM at e0000000 [disabled] [size=128K]     Capabilities: [60] Power Management version 2     Kernel driver in use: nouveau 00: de 10 21 02 06 01 b0 02 a1 00 00 03 00 28 00 00 10: 00 00 00 94 08 00 00 c0 00 00 00 92 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 05 01 noted 10: 00 00 00 94 = 0x94000000 (in little endian)   done lspi once more jean@jean-Soisy:~$ sudo lspci -vv -k -xxxx -s 03:09.0 03:09.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-     Latency: 40 (1250ns min, 250ns max)     Interrupt: pin A routed to IRQ 21     Region 0: Memory at 94000000 (32-bit, non-prefetchable) [size=16M]     Region 1: Memory at c0000000 (32-bit, prefetchable) [size=512M]     Region 2: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]     [virtual] Expansion ROM at e0000000 [disabled] [size=128K]     Capabilities: [60] Power Management version 2         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)         Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-     Kernel driver in use: nouveau 00: de 10 21 02 06 01 b0 02 a1 00 00 03 00 28 00 00 10: 00 00 00 94 08 00 00 c0 00 00 00 92 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 05 01 40: 00 00 00 00 02 00 30 00 03 00 00 1f 00 00 00 00 50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 01 04 40 c1 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 As far i can understand 10: 00 00 00 94 08 00 00 c0 00 00 00 92 00 00 00 94 BAR1 0x94000000 region 0 memory adress 08 00 00 c0 BAR2 0xc0000000 region 1 memory adress AND 08 = prefetchable 00 00 00 92 BAR3 0x92000000 region 3 memory adress   But her question is "where is size determination hidden" i found : https://wiki.osdev.org/PCI To determine the amount of address space needed by a PCI device, you must save the original value of the BAR, write a value of all 1's to the register, then read it back. The amount of memory can then be determined by masking the information bits, performing a bitwise NOT ('~' in C), and incrementing the value by 1. The original value of the BAR should then be restored. The BAR register is naturally aligned and as such you can only modify the bits that are set. For example, if a device utilizes 16 MB it will have BAR0 filled with 0xFF000000 (0x01000000 after decoding) and you can only modify the upper 8-bits. [1]   Regards   Jean COLIN     full log   [    18.743] X.Org X Server 1.15.1 Release Date: 2014-04-13 [    18.743] X Protocol Version 11, Revision 0 [    18.743] Build Operating System: Linux 4.4.0-83-generic i686 Ubuntu [    18.743] Current Operating System: Linux jean-Soisy 3.13.0-129-generic #178-Ubuntu SMP Fri Aug 11 12:49:13 UTC 2017 i686 [    18.743] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-129-generic root=UUID=0f7280ad-8482-48be-9433-13ca09f7304a ro quiet splash vt.handoff=7 [    18.743] Build Date: 20 July 2017  07:10:11PM [    18.743] xorg-server 2:1.15.1-0ubuntu2.9 (For technical support please see http://www.ubuntu.com/support) [    18.743] Current version of pixman: 0.30.2 [    18.743]     Before reporting problems, check http://wiki.x.org     to make sure that you have the latest version. [    18.743] Markers: (--) probed, (**) from config file, (==) default setting,     (++) from command line, (!!) notice, (II) informational,     (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [    18.744] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 17 12:49:17 2017 [    18.748] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [    18.754] (==) No Layout section.  Using the first Screen section. [    18.754] (==) No screen section available. Using defaults. [    18.754] (**) |-->Screen "Default Screen Section" (0) [    18.754] (**) |   |-->Monitor "" [    18.755] (==) No monitor specified for screen "Default Screen Section".     Using a default monitor configuration. [    18.755] (==) Automatically adding devices [    18.755] (==) Automatically enabling devices [    18.755] (==) Automatically adding GPU devices [    18.755] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [    18.755]     Entry deleted from font path. [    18.755] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [    18.755]     Entry deleted from font path. [    18.755] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [    18.755]     Entry deleted from font path. [    18.755] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [    18.755]     Entry deleted from font path. [    18.755] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [    18.755]     Entry deleted from font path. [    18.755] (==) FontPath set to:     /usr/share/fonts/X11/misc,     /usr/share/fonts/X11/Type1,     built-ins [    18.755] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [    18.755] (II) The server relies on udev to provide the list of input devices.     If no devices become available, reconfigure udev or disable AutoAddDevices. [    18.755] (II) Loader magic: 0xb77c76c0 [    18.755] (II) Module ABI versions: [    18.755]     X.Org ANSI C Emulation: 0.4 [    18.755]     X.Org Video Driver: 15.0 [    18.756]     X.Org XInput driver : 20.0 [    18.756]     X.Org Server Extension : 8.0 [    18.756] (II) xfree86: Adding drm device (/dev/dri/card0) [    18.757] (II) xfree86: Adding drm device (/dev/dri/card1) [    18.759] (--) PCI:*(0:0:2:0) 8086:2572:1014:0287 rev 2, Mem @ 0xa0000000/134217728, 0x90000000/524288, I/O @ 0x00001800/8 [    18.759] (--) PCI: (0:3:9:0) 10de:0221:0000:0000 rev 161, Mem @ 0x94000000/16777216, 0xc0000000/536870912, 0x92000000/16777216, BIOS @ 0x????????/131072 [    18.772] Initializing built-in extension Generic Event Extension [    18.772] Initializing built-in extension SHAPE [    18.772] Initializing built-in extension MIT-SHM [    18.772] Initializing built-in extension XInputExtension [    18.772] Initializing built-in extension XTEST [    18.772] Initializing built-in extension BIG-REQUESTS [    18.772] Initializing built-in extension SYNC [    18.772] Initializing built-in extension XKEYBOARD [    18.772] Initializing built-in extension XC-MISC [    18.772] Initializing built-in extension SECURITY [    18.772] Initializing built-in extension XINERAMA [    18.772] Initializing built-in extension XFIXES [    18.772] Initializing built-in extension RENDER [    18.772] Initializing built-in extension RANDR [    18.772] Initializing built-in extension COMPOSITE [    18.772] Initializing built-in extension DAMAGE [    18.772] Initializing built-in extension MIT-SCREEN-SAVER [    18.772] Initializing built-in extension DOUBLE-BUFFER [    18.773] Initializing built-in extension RECORD [    18.773] Initializing built-in extension DPMS [    18.773] Initializing built-in extension Present [    18.773] Initializing built-in extension DRI3 [    18.773] Initializing built-in extension X-Resource [    18.773] Initializing built-in extension XVideo [    18.773] Initializing built-in extension XVideo-MotionCompensation [    18.773] Initializing built-in extension SELinux [    18.773] Initializing built-in extension XFree86-VidModeExtension [    18.773] Initializing built-in extension XFree86-DGA [    18.773] Initializing built-in extension XFree86-DRI [    18.773] Initializing built-in extension DRI2 [    18.773] (II) LoadModule: "glx" [    18.777] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [    18.805] (II) Module glx: vendor="X.Org Foundation" [    18.806]     compiled for 1.15.1, module version = 1.0.0 [    18.806]     ABI class: X.Org Server Extension, version 8.0 [    18.806] (==) AIGLX enabled [    18.806] Loading extension GLX [    18.806] (==) Matched intel as autoconfigured driver 0 [    18.806] (==) Matched nvidia as autoconfigured driver 1 [    18.806] (==) Matched nouveau as autoconfigured driver 2 [    18.806] (==) Matched intel as autoconfigured driver 3 [    18.806] (==) Matched modesetting as autoconfigured driver 4 [    18.806] (==) Matched fbdev as autoconfigured driver 5 [    18.806] (==) Matched vesa as autoconfigured driver 6 [    18.806] (==) Assigned the driver to the xf86ConfigLayout [    18.806] (II) LoadModule: "intel" [    18.807] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [    18.810] (II) Module intel: vendor="X.Org Foundation" [    18.810]     compiled for 1.15.1, module version = 2.99.910 [    18.810]     Module class: X.Org Video Driver [    18.810]     ABI class: X.Org Video Driver, version 15.0 [    18.810] (II) LoadModule: "nvidia" [    18.814] (WW) Warning, couldn't open module nvidia [    18.814] (II) UnloadModule: "nvidia" [    18.815] (II) Unloading nvidia [    18.815] (EE) Failed to load module "nvidia" (module does not exist, 0) [    18.815] (II) LoadModule: "nouveau" [    18.819] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [    18.825] (II) Module nouveau: vendor="X.Org Foundation" [    18.825]     compiled for 1.15.0, module version = 1.0.10 [    18.826]     Module class: X.Org Video Driver [    18.826]     ABI class: X.Org Video Driver, version 15.0 [    18.826] (II) LoadModule: "modesetting" [    18.826] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [    18.826] (II) Module modesetting: vendor="X.Org Foundation" [    18.827]     compiled for 1.15.0, module version = 0.8.1 [    18.827]     Module class: X.Org Video Driver [    18.827]     ABI class: X.Org Video Driver, version 15.0 [    18.827] (II) LoadModule: "fbdev" [    18.827] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [    18.827] (II) Module fbdev: vendor="X.Org Foundation" [    18.827]     compiled for 1.15.0, module version = 0.4.4 [    18.828]     Module class: X.Org Video Driver [    18.828]     ABI class: X.Org Video Driver, version 15.0 [    18.828] (II) LoadModule: "vesa" [    18.828] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [    18.828] (II) Module vesa: vendor="X.Org Foundation" [    18.828]     compiled for 1.15.0, module version = 2.3.3 [    18.828]     Module class: X.Org Video Driver [    18.829]     ABI class: X.Org Video Driver, version 15.0 [    18.829] (==) Matched intel as autoconfigured driver 0 [    18.829] (==) Matched nvidia as autoconfigured driver 1 [    18.829] (==) Matched nouveau as autoconfigured driver 2 [    18.829] (==) Matched intel as autoconfigured driver 3 [    18.829] (==) Matched modesetting as autoconfigured driver 4 [    18.829] (==) Matched fbdev as autoconfigured driver 5 [    18.829] (==) Matched vesa as autoconfigured driver 6 [    18.829] (==) Assigned the driver to the xf86ConfigLayout [    18.829] (II) LoadModule: "intel" [    18.842] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [    18.842] (II) Module intel: vendor="X.Org Foundation" [    18.842]     compiled for 1.15.1, module version = 2.99.910 [    18.842]     Module class: X.Org Video Driver [    18.842]     ABI class: X.Org Video Driver, version 15.0 [    18.842] (II) UnloadModule: "intel" [    18.842] (II) Unloading intel [    18.842] (II) Failed to load module "intel" (already loaded, -1216908054) [    18.842] (II) LoadModule: "nvidia" [    18.843] (WW) Warning, couldn't open module nvidia [    18.843] (II) UnloadModule: "nvidia" [    18.844] (II) Unloading nvidia [    18.844] (EE) Failed to load module "nvidia" (module does not exist, 0) [    18.844] (II) LoadModule: "nouveau" [    18.844] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [    18.844] (II) Module nouveau: vendor="X.Org Foundation" [    18.844]     compiled for 1.15.0, module version = 1.0.10 [    18.844]     Module class: X.Org Video Driver [    18.844]     ABI class: X.Org Video Driver, version 15.0 [    18.844] (II) UnloadModule: "nouveau" [    18.844] (II) Unloading nouveau [    18.845] (II) Failed to load module "nouveau" (already loaded, 0) [    18.845] (II) LoadModule: "modesetting" [    18.845] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [    18.845] (II) Module modesetting: vendor="X.Org Foundation" [    18.845]     compiled for 1.15.0, module version = 0.8.1 [    18.845]     Module class: X.Org Video Driver [    18.845]     ABI class: X.Org Video Driver, version 15.0 [    18.845] (II) UnloadModule: "modesetting" [    18.845] (II) Unloading modesetting [    18.845] (II) Failed to load module "modesetting" (already loaded, 0) [    18.845] (II) LoadModule: "fbdev" [    18.857] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [    18.857] (II) Module fbdev: vendor="X.Org Foundation" [    18.857]     compiled for 1.15.0, module version = 0.4.4 [    18.857]     Module class: X.Org Video Driver [    18.857]     ABI class: X.Org Video Driver, version 15.0 [    18.857] (II) UnloadModule: "fbdev" [    18.857] (II) Unloading fbdev [    18.857] (II) Failed to load module "fbdev" (already loaded, 0) [    18.857] (II) LoadModule: "vesa" [    18.858] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [    18.858] (II) Module vesa: vendor="X.Org Foundation" [    18.858]     compiled for 1.15.0, module version = 2.3.3 [    18.858]     Module class: X.Org Video Driver [    18.858]     ABI class: X.Org Video Driver, version 15.0 [    18.858] (II) UnloadModule: "vesa" [    18.858] (II) Unloading vesa [    18.858] (II) Failed to load module "vesa" (already loaded, 0) [    18.858] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:     i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,     915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,     Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,     GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [    18.860] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [    18.860] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [    18.860] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [    18.860] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000 [    18.860] (II) NOUVEAU driver for NVIDIA chipset families : [    18.860]     RIVA TNT        (NV04) [    18.860]     RIVA TNT2       (NV05) [    18.860]     GeForce 256     (NV10) [    18.860]     GeForce 2       (NV11, NV15) [    18.860]     GeForce 4MX     (NV17, NV18) [    18.860]     GeForce 3       (NV20) [    18.861]     GeForce 4Ti     (NV25, NV28) [    18.861]     GeForce FX      (NV3x) [    18.861]     GeForce 6       (NV4x) [    18.861]     GeForce 7       (G7x) [    18.861]     GeForce 8       (G8x) [    18.861]     GeForce GTX 200 (NVA0) [    18.861]     GeForce GTX 400 (NVC0) [    18.861] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [    18.862] (II) FBDEV: driver for framebuffer: fbdev [    18.862] (II) VESA: driver for VESA chipsets: vesa [    18.862] (++) using VT number 7 [    18.862] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.7 (Daniel Gimpelevich ) [    18.863] (II) [drm] nouveau interface version: 1.1.2 [    18.863] (WW) Falling back to old probe method for modesetting [    18.863] (WW) Falling back to old probe method for fbdev [    18.863] (II) Loading sub module "fbdevhw" [    18.863] (II) LoadModule: "fbdevhw" [    18.864] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [    18.864] (II) Module fbdevhw: vendor="X.Org Foundation" [    18.864]     compiled for 1.15.1, module version = 0.0.2 [    18.864]     ABI class: X.Org Video Driver, version 15.0 [    18.864] (WW) Falling back to old probe method for vesa [    18.867] (--) intel(0): Integrated Graphics Chipset: Intel(R) 865G [    18.867] (--) intel(0): CPU: x86, sse2, sse3 [    18.867] (II) intel(0): Creating default Display subsection in Screen section     "Default Screen Section" for depth/fbbpp 24/32 [    18.867] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [    18.867] (==) intel(0): RGB weight 888 [    18.867] (==) intel(0): Default visual is TrueColor [    18.868] (**) intel(0): Framebuffer tiled [    18.868] (**) intel(0): Pixmaps tiled [    18.868] (**) intel(0): "Tear free" disabled [    18.868] (**) intel(0): Forcing per-crtc-pixmaps? no [    18.868] (II) intel(0): Output VGA1 has no monitor section [    18.868] (II) intel(0): Output VIRTUAL1 has no monitor section [    18.868] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 0 [    18.868] (==) intel(0): DPI set to (96, 96) [    18.868] (II) Loading sub module "dri2" [    18.868] (II) LoadModule: "dri2" [    18.868] (II) Module "dri2" already built-in [    18.868] (II) Loading sub module "dri2" [    18.868] (II) LoadModule: "dri2" [    18.868] (II) Module "dri2" already built-in [    18.869] (--) NOUVEAU(G0): Chipset: "NVIDIA NV4A" [    18.869] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32 [    18.869] (==) NOUVEAU(G0): RGB weight 888 [    18.869] (==) NOUVEAU(G0): Default visual is TrueColor [    18.869] (==) NOUVEAU(G0): Using HW cursor [    18.869] (==) NOUVEAU(G0): GLX sync to VBlank enabled. [    18.869] (==) NOUVEAU(G0): Page flipping enabled [    18.869] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2] [    18.900] (II) NOUVEAU(G0): Output DVI-I-1-1 has no monitor section [    18.928] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section [    18.956] (II) NOUVEAU(G0): Output TV-1-1 has no monitor section [    18.984] (II) NOUVEAU(G0): EDID for output DVI-I-1-1 [    19.012] (II) NOUVEAU(G0): EDID for output VGA-1-2 [    19.040] (II) NOUVEAU(G0): EDID for output TV-1-1 [    19.040] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [    19.040] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0) [    19.040] (**) NOUVEAU(G0):  Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz [    19.040] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz) [    19.040] (==) NOUVEAU(G0): DPI set to (96, 96) [    19.040] (II) Loading sub module "fb" [    19.040] (II) LoadModule: "fb" [    19.041] (II) Loading /usr/lib/xorg/modules/libfb.so [    19.044] (II) Module fb: vendor="X.Org Foundation" [    19.044]     compiled for 1.15.1, module version = 1.0.0 [    19.044]     ABI class: X.Org ANSI C Emulation, version 0.4 [    19.044] (II) Loading sub module "exa" [    19.044] (II) LoadModule: "exa" [    19.044] (II) Loading /usr/lib/xorg/modules/libexa.so [    19.046] (II) Module exa: vendor="X.Org Foundation" [    19.046]     compiled for 1.15.1, module version = 2.6.0 [    19.046]     ABI class: X.Org Video Driver, version 15.0 [    19.046] (II) Loading sub module "shadowfb" [    19.046] (II) LoadModule: "shadowfb" [    19.047] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [    19.048] (II) Module shadowfb: vendor="X.Org Foundation" [    19.049]     compiled for 1.15.1, module version = 1.0.0 [    19.049]     ABI class: X.Org ANSI C Emulation, version 0.4 [    19.049] (II) UnloadModule: "modesetting" [    19.049] (II) Unloading modesetting [    19.049] (II) UnloadModule: "fbdev" [    19.049] (II) Unloading fbdev [    19.049] (II) UnloadSubModule: "fbdevhw" [    19.049] (II) Unloading fbdevhw [    19.049] (II) UnloadModule: "vesa" [    19.049] (II) Unloading vesa [    19.049] (==) Depth 24 pixmap format is 32 bpp [    19.052] (II) NOUVEAU(G0): Opened GPU channel 0 [    19.058] (II) NOUVEAU(G0): [DRI2] Setup complete [    19.058] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau [    19.058] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau [    19.058] (II) EXA(256): Driver allocated offscreen pixmaps [    19.058] (II) EXA(256): Driver registered support for the following operations: [    19.058] (II)         Solid [    19.058] (II)         Copy [    19.058] (II)         Composite (RENDER acceleration) [    19.058] (II)         UploadToScreen [    19.058] (II)         DownloadFromScreen [    19.059] (==) NOUVEAU(G0): Backing store enabled [    19.059] (==) NOUVEAU(G0): Silken mouse enabled [    19.059] (II) NOUVEAU(G0): [XvMC] Associated with NV40 texture adapter. [    19.059] (EE) NOUVEAU(G0): [XvMC] Failed to initialize extension. [    19.059] (==) NOUVEAU(G0): DPMS enabled [    19.059] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [    19.060] (II) intel(0): SNA initialized with Almador (gen2) backend [    19.060] (==) intel(0): Backing store enabled [    19.060] (==) intel(0): Silken mouse enabled [    19.060] (II) intel(0): HW Cursor enabled [    19.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [    19.060] (==) intel(0): DPMS enabled [    19.060] (II) intel(0): Textured video not supported on this hardware [    19.061] (II) intel(0): [DRI2] Setup complete [    19.061] (II) intel(0): [DRI2]   DRI driver: i915 [    19.061] (II) intel(0): [DRI2]   VDPAU driver: i915 [    19.061] (II) intel(0): direct rendering: DRI2 Enabled [    19.061] (==) intel(0): hotplug detection: "enabled" [    19.061] (--) RandR disabled [    19.082] (II) SELinux: Disabled on system [    19.100] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [    19.100] (II) AIGLX: enabled GLX_ARB_create_context [    19.100] (II) AIGLX: enabled GLX_ARB_create_context_profile [    19.100] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [    19.100] (II) AIGLX: enabled GLX_INTEL_swap_event [    19.100] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [    19.100] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [    19.100] (II) AIGLX: enabled GLX_ARB_fbconfig_float [    19.100] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [    19.101] (II) AIGLX: Loaded and initialized i915 [    19.101] (II) GLX: Initialized DRI2 GL provider for screen 0 [    19.130] (II) NOUVEAU(G0): NVEnterVT is called. [    19.151] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [    19.168] (II) intel(0): Setting screen physical size to 507 x 285 [    19.192] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [    19.202] (II) config/udev: Adding input device Power Button (/dev/input/event1) [    19.202] (**) Power Button: Applying InputClass "evdev keyboard catchall" [    19.202] (II) LoadModule: "evdev" [    19.203] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [    19.206] (II) Module evdev: vendor="X.Org Foundation" [    19.206]     compiled for 1.15.0, module version = 2.8.2 [    19.206]     Module class: X.Org XInput Driver [    19.206]     ABI class: X.Org XInput driver, version 20.0 [    19.206] (II) Using input driver 'evdev' for 'Power Button' [    19.206] (**) Power Button: always reports core events [    19.206] (**) evdev: Power Button: Device: "/dev/input/event1" [    19.206] (--) evdev: Power Button: Vendor 0 Product 0x1 [    19.206] (--) evdev: Power Button: Found keys [    19.206] (II) evdev: Power Button: Configuring as keyboard [    19.206] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [    19.206] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [    19.207] (**) Option "xkb_rules" "evdev" [    19.207] (**) Option "xkb_model" "pc105" [    19.207] (**) Option "xkb_layout" "fr" [    19.207] (**) Option "xkb_variant" "latin9" [    19.213] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm [    19.215] (II) config/udev: Adding input device Power Button (/dev/input/event0) [    19.215] (**) Power Button: Applying InputClass "evdev keyboard catchall" [    19.215] (II) Using input driver 'evdev' for 'Power Button' [    19.216] (**) Power Button: always reports core events [    19.216] (**) evdev: Power Button: Device: "/dev/input/event0" [    19.216] (--) evdev: Power Button: Vendor 0 Product 0x1 [    19.216] (--) evdev: Power Button: Found keys [    19.216] (II) evdev: Power Button: Configuring as keyboard [    19.216] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0/event0" [    19.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [    19.216] (**) Option "xkb_rules" "evdev" [    19.216] (**) Option "xkb_model" "pc105" [    19.216] (**) Option "xkb_layout" "fr" [    19.216] (**) Option "xkb_variant" "latin9" [    19.217] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [    19.217] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [    19.218] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event3) [    19.219] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall" [    19.219] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse' [    19.219] (**) Logitech Optical USB Mouse: always reports core events [    19.219] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event3" [    19.219] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016 [    19.219] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons [    19.219] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s) [    19.219] (--) evdev: Logitech Optical USB Mouse: Found relative axes [    19.219] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes [    19.219] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse [    19.219] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support [    19.219] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5 [    19.219] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [    19.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3/event3" [    19.219] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8) [    19.219] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes. [    19.220] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1 [    19.220] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0 [    19.220] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000 [    19.220] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4 [    19.221] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0) [    19.221] (II) No input driver specified, ignoring this device. [    19.221] (II) This device may have been added with another device file. [    19.221] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:1e.0/0000:03:09.0/drm/card1 [    19.222] (II) config/udev: Ignoring already known drm device (/dev/dri/card1) [    19.223] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2) [    19.223] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [    19.223] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [    19.223] (**) AT Translated Set 2 keyboard: always reports core events [    19.223] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2" [    19.223] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [    19.223] (--) evdev: AT Translated Set 2 keyboard: Found keys [    19.223] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [    19.223] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2" [    19.223] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [    19.223] (**) Option "xkb_rules" "evdev" [    19.223] (**) Option "xkb_model" "pc105" [    19.223] (**) Option "xkb_layout" "fr" [    19.224] (**) Option "xkb_variant" "latin9" [    19.673] reporting 4 5 1 9 [    27.733] reporting 4 5 1 9 [    27.767] reporting 4 5 1 9 [    27.779] reporting 4 5 1 9 [    27.981] reporting 4 5 1 9 [    28.034] reporting 4 5 1 9 [    28.552] (II) intel(0): EDID vendor "GSM", prod id 23225 [    28.552] (II) intel(0): Using EDID range info for horizontal sync [    28.552] (II) intel(0): Using EDID range info for vertical refresh [    28.552] (II) intel(0): Printing DDC gathered Modelines: [    28.552] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [    28.552] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e) [    28.552] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e) [    28.552] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e) [    28.552] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e) [    28.552] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [    28.552] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e) [    28.552] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e) [    28.553] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e) [    28.553] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e) [    28.553] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [    28.553] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e) [    28.553] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [    28.553] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e) [    28.553] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e) [    28.553] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e) [    28.553] (II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [    28.555] reporting 4 5 17 136 [    28.565] reporting 4 5 17 136 [    28.566] reporting 4 5 17 136 [    28.749] reporting 4 5 17 136 [    28.916] reporting 4 5 17 136 [    28.918] reporting 4 5 17 136 [    28.919] reporting 4 5 17 136 [    28.919] reporting 4 5 17 136 [    28.921] reporting 4 5 17 136 [    29.376] reporting 4 5 17 136 [    29.410] reporting 4 5 17 136 [    29.796] reporting 4 5 17 136 [    29.983] reporting 4 5 17 136 [    30.044] reporting 4 5 17 136 [    30.159] reporting 4 5 17 136 [    30.160] reporting 4 5 17 136 [    30.213] reporting 4 5 17 136 [    30.260] reporting 4 5 17 136 [    30.268] reporting 4 5 17 136 [    30.373] reporting 4 5 17 136 [    30.528] reporting 4 5 17 136 [    30.549] reporting 4 5 17 136 [    30.592] reporting 4 5 17 136 [    30.896] reporting 4 5 17 136 [    31.993] reporting 4 5 17 136 [    32.786] reporting 4 5 17 136 [    33.349] reporting 4 5 17 136 [    33.394] reporting 4 5 17 136 [    34.048] reporting 4 5 17 136 [    34.075] reporting 4 5 17 136 [    34.099] reporting 4 5 17 136 [    34.142] reporting 4 5 17 136 [    34.240] reporting 4 5 17 136 [    34.541] reporting 4 5 17 136 [    35.116] reporting 4 5 17 136 [    35.544] reporting 4 5 17 136 [    35.582] reporting 4 5 17 136 [    36.785] reporting 4 5 17 136 [    52.280] reporting 4 5 17 136 [   552.015] reporting 4 5 17 136 [   555.269] reporting 4 5 17 136 [   571.108] reporting 4 5 17 136 [  1232.832] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  1233.085] (II) AIGLX: Suspending AIGLX clients for VT switch [  1233.085] (II) NOUVEAU(G0): NVLeaveVT is called. [  1300.685] (II) AIGLX: Resuming AIGLX clients after VT switch [  1300.685] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  1300.868] (II) NOUVEAU(G0): NVEnterVT is called. [  2067.798] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  2067.972] (II) AIGLX: Suspending AIGLX clients for VT switch [  2067.973] (II) NOUVEAU(G0): NVLeaveVT is called. [  2293.656] (II) AIGLX: Resuming AIGLX clients after VT switch [  2293.656] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  2293.844] (II) NOUVEAU(G0): NVEnterVT is called. [  2618.504] reporting 4 5 17 136 [  3406.802] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  3406.967] (II) AIGLX: Suspending AIGLX clients for VT switch [  3406.967] (II) NOUVEAU(G0): NVLeaveVT is called. [  4546.344] (II) AIGLX: Resuming AIGLX clients after VT switch [  4546.344] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  4546.648] (II) NOUVEAU(G0): NVEnterVT is called. [  6845.040] reporting 4 5 17 136 [  7594.281] reporting 4 5 17 136 [  7594.327] reporting 4 5 17 136 [  7594.377] reporting 4 5 17 136 [  7621.876] reporting 4 5 17 136 [  7646.834] reporting 4 5 17 136 [  7708.656] reporting 4 5 17 136 [  8408.403] reporting 4 5 17 136 [  8464.383] reporting 4 5 17 136 [  9325.849] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  9326.044] (II) AIGLX: Suspending AIGLX clients for VT switch [  9326.044] (II) NOUVEAU(G0): NVLeaveVT is called. [  9566.844] (II) AIGLX: Resuming AIGLX clients after VT switch [  9566.845] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [  9567.040] (II) NOUVEAU(G0): NVEnterVT is called. [  9699.499] reporting 4 5 17 136 [  9790.809] reporting 4 5 17 136 [  9950.440] reporting 4 5 17 136 [  9950.524] reporting 4 5 17 136 [  9950.598] reporting 4 5 17 136 [ 16846.479] reporting 4 5 17 136               > Message du 16/05/18 07:55 > De : "Kai-Heng Feng" > A :