[ 0.000000] Linux version 2.6.24-2-generic (buildd@crested) (gcc version 4.2.3 20071210 (prerelease) (Ubuntu 4.2.2-4ubuntu1)) #1 SMP Thu Dec 20 17:58:55 GMT 2007 (Ubuntu 2.6.24-2.4-generic) [ 0.000000] Command line: root=UUID=e139dd1c-f58d-4b29-98c2-a9e3fdafd05b ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cb000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6cb000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1310720 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F76D0 checksum 0 [ 0.000000] ACPI: RSDP 000F76D0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BF6BEDBC, 0094 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: FACP BF6C7BD2, 00F4 (r3 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: DSDT BF6C041A, 7744 (r2 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: FACS BF6CAFC0, 0040 [ 0.000000] ACPI: APIC BF6C7CC6, 0068 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: HPET BF6C7D2E, 0038 (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: MCFG BF6C7D66, 003C (r1 Sony VAIO 20070905 PTL 5A) [ 0.000000] ACPI: TCPA BF6C7DA2, 0032 (r1 Sony VAIO 20070905 PTL 5A52) [ 0.000000] ACPI: TMOR BF6C7DD4, 0026 (r1 Sony VAIO 20070905 PTL 3) [ 0.000000] ACPI: SLIC BF6C7DFA, 0176 (r1 Sony VAIO 20070905 PTL 1000000) [ 0.000000] ACPI: APIC BF6C7F70, 0068 (r1 Sony VAIO 20070905 PTL 0) [ 0.000000] ACPI: BOOT BF6C7FD8, 0028 (r1 Sony VAIO 20070905 PTL 1) [ 0.000000] ACPI: SSDT BF6C013D, 02DD (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6C001B, 0122 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF3DC, 025F (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BF336, 00A6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: SSDT BF6BEE50, 04E6 (r1 Sony VAIO 20070905 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 784048) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 784048 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1046095 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1189 pages reserved [ 0.000000] DMA zone: 2754 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cb000 [ 0.000000] swsusp: Registered nosave memory region: 00000000bf6cb000 - 00000000c0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34528 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026986 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=e139dd1c-f58d-4b29-98c2-a9e3fdafd05b ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 24.936923] Marking TSC unstable due to TSCs unsynchronized [ 24.936926] time.c: Detected 2194.498 MHz processor. [ 24.938265] Console: colour VGA+ 80x25 [ 24.938267] console [tty0] enabled [ 24.938286] Checking aperture... [ 24.938296] Calgary: detecting Calgary via BIOS EBDA area [ 24.938298] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 24.938299] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 24.976727] Placing software IO TLB between 0x103b000 - 0x503b000 [ 25.013937] Memory: 4033752k/5242880k available (2412k kernel code, 150628k reserved, 1287k data, 312k init) [ 25.013967] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 25.090704] Calibrating delay using timer specific routine.. 4393.41 BogoMIPS (lpj=8786827) [ 25.090733] Security Framework initialized [ 25.090739] SELinux: Disabled at boot. [ 25.090742] Capability LSM initialized [ 25.091048] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 25.093373] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 25.094532] Mount-cache hash table entries: 256 [ 25.094662] CPU: L1 I cache: 32K, L1 D cache: 32K [ 25.094665] CPU: L2 cache: 4096K [ 25.094667] CPU 0/0 -> Node 0 [ 25.094668] using mwait in idle threads. [ 25.094669] CPU: Physical Processor ID: 0 [ 25.094670] CPU: Processor Core ID: 0 [ 25.094675] CPU0: Thermal monitoring enabled (TM2) [ 25.094687] SMP alternatives: switching to UP code [ 25.095367] Early unpacking initramfs... done [ 25.393412] ACPI: Core revision 20070126 [ 25.393453] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.444312] Using local APIC timer interrupts. [ 25.489823] APIC timer calibration result 12468741 [ 25.489824] Detected 12.468 MHz APIC timer. [ 25.489892] SMP alternatives: switching to SMP code [ 25.490448] Booting processor 1/2 APIC 0x1 [ 25.500909] Initializing CPU#1 [ 25.577715] Calibrating delay using timer specific routine.. 4388.96 BogoMIPS (lpj=8777938) [ 25.577721] CPU: L1 I cache: 32K, L1 D cache: 32K [ 25.577723] CPU: L2 cache: 4096K [ 25.577724] CPU 1/1 -> Node 0 [ 25.577726] CPU: Physical Processor ID: 0 [ 25.577726] CPU: Processor Core ID: 1 [ 25.577732] CPU1: Thermal monitoring enabled (TM2) [ 25.578188] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 25.578291] Brought up 2 CPUs [ 25.578367] CPU0 attaching sched-domain: [ 25.578369] domain 0: span 03 [ 25.578370] groups: 01 02 [ 25.578373] domain 1: span 03 [ 25.578374] groups: 03 [ 25.578376] CPU1 attaching sched-domain: [ 25.578377] domain 0: span 03 [ 25.578378] groups: 02 01 [ 25.578380] domain 1: span 03 [ 25.578381] groups: 03 [ 25.578571] net_namespace: 120 bytes [ 25.578914] Time: 9:41:53 Date: 12/28/07 [ 25.578935] NET: Registered protocol family 16 [ 25.579090] ACPI: bus type pci registered [ 25.579151] PCI: Using configuration type 1 [ 25.580295] ACPI: EC: Look up EC in DSDT [ 25.581976] ACPI: System BIOS is requesting _OSI(Linux) [ 25.581978] ACPI: If "acpi_osi=Linux" works better, [ 25.581979] Please send dmidecode to linux-acpi@vger.kernel.org [ 25.584049] ACPI: Interpreter enabled [ 25.584051] ACPI: (supports S0 S3 S4 S5) [ 25.584062] ACPI: Using IOAPIC for interrupt routing [ 25.598474] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 25.598477] ACPI: EC: driver started in poll mode [ 25.598560] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.601368] PCI: Transparent bridge - 0000:00:1e.0 [ 25.601521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.601885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 25.602010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 25.602124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 25.602240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 25.602372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 25.609338] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 25.609428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 25.609517] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 25.609603] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 25.609713] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 25.609802] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 25.609888] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 25.609974] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 25.610107] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.610130] pnp: PnP ACPI init [ 25.610135] ACPI: bus type pnp registered [ 25.614949] pnpacpi: exceeded the max number of IRQ resources: 2 [ 25.615004] pnpacpi: exceeded the max number of IRQ resources: 2 [ 25.615055] pnpacpi: exceeded the max number of IRQ resources: 2 [ 25.615106] pnpacpi: exceeded the max number of IRQ resources: 2 [ 25.615158] pnpacpi: exceeded the max number of IRQ resources: 2 [ 25.618713] pnp: PnP ACPI: found 12 devices [ 25.618715] ACPI: ACPI bus type pnp unregistered [ 25.618876] PCI: Using ACPI for IRQ routing [ 25.618878] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.633664] NET: Registered protocol family 8 [ 25.633665] NET: Registered protocol family 20 [ 25.633691] PCI-GART: No AMD northbridge found. [ 25.633697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 25.633699] hpet0: 3 64-bit timers, 14318180 Hz [ 25.637636] Time: hpet clocksource has been installed. [ 25.637645] Switched to high resolution mode on CPU 0 [ 25.638124] Switched to high resolution mode on CPU 1 [ 25.645620] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 25.645622] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 25.645625] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 25.645627] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 25.645629] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 25.645631] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 25.645633] system 00:01: iomem range 0x0-0x0 could not be reserved [ 25.645635] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 25.645641] system 00:07: ioport range 0x680-0x69f has been reserved [ 25.645643] system 00:07: ioport range 0x800-0x80f has been reserved [ 25.645645] system 00:07: ioport range 0x1000-0x107f has been reserved [ 25.645647] system 00:07: ioport range 0x1180-0x11bf has been reserved [ 25.645649] system 00:07: ioport range 0x1640-0x164f has been reserved [ 25.645651] system 00:07: ioport range 0xfe00-0xfe00 has been reserved [ 25.646000] PCI: Bridge: 0000:00:1c.0 [ 25.646003] IO window: 2000-2fff [ 25.646009] MEM window: f6000000-f7ffffff [ 25.646013] PREFETCH window: f0000000-f1ffffff [ 25.646019] PCI: Bridge: 0000:00:1c.1 [ 25.646021] IO window: 3000-3fff [ 25.646027] MEM window: f8000000-f9ffffff [ 25.646031] PREFETCH window: f2000000-f3ffffff [ 25.646037] PCI: Bridge: 0000:00:1c.2 [ 25.646040] IO window: 4000-4fff [ 25.646046] MEM window: fa000000-fbffffff [ 25.646050] PREFETCH window: f4000000-f5ffffff [ 25.646056] PCI: Bridge: 0000:00:1c.3 [ 25.646058] IO window: 5000-5fff [ 25.646064] MEM window: c8000000-c9ffffff [ 25.646068] PREFETCH window: cc000000-cdffffff [ 25.646077] PCI: Bus 10, cardbus bridge: 0000:09:04.0 [ 25.646079] IO window: 00001400-000014ff [ 25.646083] IO window: 00006000-000060ff [ 25.646088] PREFETCH window: c4000000-c7ffffff [ 25.646093] MEM window: 140000000-143ffffff [ 25.646098] PCI: Bridge: 0000:00:1e.0 [ 25.646098] IO window: disabled. [ 25.646104] MEM window: fc200000-fc2fffff [ 25.646108] PREFETCH window: disabled. [ 25.646139] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.646144] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 25.646169] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 25.646174] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 25.646198] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 25.646204] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 25.646228] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 25.646233] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 25.646247] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 25.646265] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 25.646276] NET: Registered protocol family 2 [ 25.681663] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.682666] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 25.686566] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 25.687149] TCP: Hash tables configured (established 524288 bind 65536) [ 25.687151] TCP reno registered [ 25.697667] checking if image is initramfs... it is [ 26.333851] Freeing initrd memory: 7967k freed [ 26.337447] Simple Boot Flag at 0x36 set to 0x1 [ 26.338158] audit: initializing netlink socket (disabled) [ 26.338175] audit(1198834913.360:1): initialized [ 26.339914] VFS: Disk quotas dquot_6.5.1 [ 26.339972] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 26.340084] AppArmor: Unable to register AppArmor [ 26.340152] io scheduler noop registered [ 26.340154] io scheduler anticipatory registered [ 26.340155] io scheduler deadline registered [ 26.340239] io scheduler cfq registered (default) [ 26.340257] Boot video device is 0000:00:02.0 [ 26.343953] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 26.344016] assign_interrupt_mode Found MSI capability [ 26.344067] Allocate Port Service[0000:00:1c.0:pcie00] [ 26.344095] Allocate Port Service[0000:00:1c.0:pcie02] [ 26.344196] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 26.344257] assign_interrupt_mode Found MSI capability [ 26.344305] Allocate Port Service[0000:00:1c.1:pcie00] [ 26.344333] Allocate Port Service[0000:00:1c.1:pcie02] [ 26.344429] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 26.344490] assign_interrupt_mode Found MSI capability [ 26.344538] Allocate Port Service[0000:00:1c.2:pcie00] [ 26.344561] Allocate Port Service[0000:00:1c.2:pcie02] [ 26.344666] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 26.344727] assign_interrupt_mode Found MSI capability [ 26.344774] Allocate Port Service[0000:00:1c.3:pcie00] [ 26.344800] Allocate Port Service[0000:00:1c.3:pcie02] [ 26.363580] Real Time Clock Driver v1.12ac [ 26.363777] hpet_resources: 0xfed00000 is busy [ 26.363799] Linux agpgart interface v0.102 [ 26.363801] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.364708] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.364758] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 26.364834] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 26.367074] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.367078] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.385649] mice: PS/2 mouse device common for all mice [ 26.385678] cpuidle: using governor ladder [ 26.385680] cpuidle: using governor menu [ 26.385741] TCP cubic registered [ 26.385789] NET: Registered protocol family 1 [ 26.385928] Magic number: 3:228:678 [ 26.386010] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 26.386016] Freeing unused kernel memory: 312k freed [ 26.409225] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 27.540008] fuse init (API version 7.9) [ 27.547724] ACPI: SSDT BF6BFCD9, 027A (r1 Sony VAIO 20070905 PTL 20050624) [ 27.547913] ACPI: SSDT BF6BF63B, 0619 (r1 Sony VAIO 20070905 PTL 20050624) [ 27.551350] Monitor-Mwait will be used to enter C-1 state [ 27.551352] Monitor-Mwait will be used to enter C-2 state [ 27.551430] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 27.551433] ACPI: Processor [CPU0] (supports 8 throttling states) [ 27.551631] ACPI: SSDT BF6BFF53, 00C8 (r1 Sony VAIO 20070905 PTL 20050624) [ 27.551805] ACPI: SSDT BF6BFC54, 0085 (r1 Sony VAIO 20070905 PTL 20050624) [ 27.554289] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 27.554293] ACPI: Processor [CPU1] (supports 8 throttling states) [ 27.561985] ACPI: Thermal Zone [ATF0] (51 C) [ 27.562687] ACPI: Thermal Zone [DTS0] (49 C) [ 27.563406] ACPI: Thermal Zone [DTS1] (50 C) [ 27.639854] usbcore: registered new interface driver usbfs [ 27.639873] usbcore: registered new interface driver hub [ 27.646940] usbcore: registered new device driver usb [ 27.648051] USB Universal Host Controller Interface driver v3.0 [ 27.648094] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 27.648104] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 27.648108] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 27.648319] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 27.648350] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 27.648459] usb usb1: configuration #1 chosen from 1 choice [ 27.648479] hub 1-0:1.0: USB hub found [ 27.648483] hub 1-0:1.0: 2 ports detected [ 27.754780] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 27.754793] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 27.754796] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 27.754815] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 27.754842] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 27.754930] usb usb2: configuration #1 chosen from 1 choice [ 27.754947] hub 2-0:1.0: USB hub found [ 27.754952] hub 2-0:1.0: 2 ports detected [ 27.848549] SCSI subsystem initialized [ 27.858666] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 27.858678] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 27.858682] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 27.858700] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 27.858730] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 27.858816] usb usb3: configuration #1 chosen from 1 choice [ 27.858833] hub 3-0:1.0: USB hub found [ 27.858838] hub 3-0:1.0: 2 ports detected [ 27.871468] libata version 3.00 loaded. [ 27.962493] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 23 [ 27.962504] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 27.962508] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 27.962525] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 27.962551] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880 [ 27.962631] usb usb4: configuration #1 chosen from 1 choice [ 27.962647] hub 4-0:1.0: USB hub found [ 27.962651] hub 4-0:1.0: 2 ports detected [ 28.066363] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 28.066374] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 28.066377] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 28.066397] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 28.066424] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0 [ 28.066508] usb usb5: configuration #1 chosen from 1 choice [ 28.066525] hub 5-0:1.0: USB hub found [ 28.066530] hub 5-0:1.0: 2 ports detected [ 28.170341] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20 [ 28.171357] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 28.171363] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 28.171408] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 28.175314] ehci_hcd 0000:00:1a.7: debug port 1 [ 28.175321] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 28.175327] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800 [ 28.194112] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.194216] usb usb6: configuration #1 chosen from 1 choice [ 28.194235] hub 6-0:1.0: USB hub found [ 28.194241] hub 6-0:1.0: 4 ports detected [ 28.294074] ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 28.344176] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 28.344474] ahci 0000:00:1f.2: version 3.0 [ 28.344498] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 28.789261] usb 6-2: new high speed USB device using ehci_hcd and address 3 [ 28.924564] usb 6-2: configuration #1 chosen from 1 choice [ 29.160749] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 29.336202] usb 1-1: configuration #1 chosen from 1 choice [ 29.344531] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 29.344534] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 29.344539] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 29.345170] scsi0 : ahci [ 29.345345] scsi1 : ahci [ 29.345471] scsi2 : ahci [ 29.345543] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 507 [ 29.345546] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 507 [ 29.345549] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 507 [ 29.819838] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.820871] ata1.00: ATA-7: ST91608220AS, 3.ALE, max UDMA/133 [ 29.820874] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 29.822039] ata1.00: configured for UDMA/133 [ 30.131428] ata2: SATA link down (SStatus 0 SControl 300) [ 30.442988] ata3: SATA link down (SStatus 0 SControl 300) [ 30.443070] scsi 0:0:0:0: Direct-Access ATA ST91608220AS 3.AL PQ: 0 ANSI: 5 [ 30.443853] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 30.444677] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 30.444682] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 30.444734] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 30.448644] ehci_hcd 0000:00:1d.7: debug port 1 [ 30.448651] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 30.448656] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00 [ 30.459008] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 30.459017] sd 0:0:0:0: [sda] Write Protect is off [ 30.459019] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.459030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.459068] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 30.459075] sd 0:0:0:0: [sda] Write Protect is off [ 30.459076] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.459088] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.459090] sda: sda1 sda2 sda3 sda4 [ 30.462932] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 30.463032] usb usb7: configuration #1 chosen from 1 choice [ 30.463051] hub 7-0:1.0: USB hub found [ 30.463057] hub 7-0:1.0: 6 ports detected [ 30.473873] sd 0:0:0:0: [sda] Attached SCSI disk [ 30.476772] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.566886] ata_piix 0000:00:1f.1: version 2.12 [ 30.566907] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 30.566943] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 30.567269] scsi3 : ata_piix [ 30.567307] scsi4 : ata_piix [ 30.567365] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 30.567367] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 30.846173] Attempting manual resume [ 30.846175] swsusp: Resume From Partition 8:4 [ 30.846176] PM: Checking swsusp image. [ 30.846372] PM: Resume from disk failed. [ 30.874758] kjournald starting. Commit interval 5 seconds [ 30.874780] EXT3-fs: mounted filesystem with ordered data mode. [ 30.887900] ata4.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.01, max UDMA/33 [ 30.974251] usb 7-4: new high speed USB device using ehci_hcd and address 2 [ 31.058547] ata4.00: configured for UDMA/33 [ 31.173210] usb 7-4: configuration #1 chosen from 1 choice [ 31.228128] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.01 PQ: 0 ANSI: 5 [ 31.228183] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 31.809066] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 32.021853] usb 5-1: configuration #1 chosen from 1 choice [ 37.066642] iTCO_vendor_support: vendor-support=0 [ 37.083065] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 37.083128] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 37.083137] iTCO_wdt: No card detected [ 37.161796] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 37.188110] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.216768] agpgart: Detected an Intel 965GM Chipset. [ 37.218323] agpgart: Detected 7676K stolen memory. [ 37.230397] agpgart: AGP aperture is 256M @ 0xd0000000 [ 37.254815] input: Power Button (CM) as /devices/virtual/input/input2 [ 37.314319] ACPI: Power Button (CM) [PWRB] [ 37.314377] input: Lid Switch as /devices/virtual/input/input3 [ 37.341801] ACPI: Lid Switch [LID0] [ 37.353058] shpchp: Unknown symbol acpi_run_oshp [ 37.353103] shpchp: Unknown symbol pci_hp_change_slot_info [ 37.353159] shpchp: Unknown symbol pci_hp_register [ 37.353297] shpchp: Unknown symbol pci_hp_deregister [ 37.353402] shpchp: Unknown symbol acpi_get_hp_params_from_firmware [ 37.382895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.474241] Yenta: CardBus bridge found at 0000:09:04.0 [104d:9008] [ 37.474266] Yenta: Using CSCINT to route CSC interrupts to PCI [ 37.474268] Yenta: Routing CardBus interrupts to PCI [ 37.474273] Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 [ 37.514229] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 37.643750] sony-laptop: Sony Programmable IO Control Driver v0.5. [ 37.643758] sony-laptop: detected Type2 model [ 37.646189] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/SNY6001:00/input/input5 [ 37.673781] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 37.701927] input: Sony Vaio Jogdial as /devices/virtual/input/input7 [ 37.706685] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 37.706690] Socket status: 30000006 [ 37.706692] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 37.706698] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff [ 37.722797] ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 37.760843] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 37.804246] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 37.804250] Uniform CD-ROM driver Revision: 3.20 [ 37.804291] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 37.813784] sony-laptop: device allocated minor is 63 [ 37.941737] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 37.941772] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 37.942727] sky2 0000:07:00.0: v1.20 addr 0xfa000000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 37.943950] sky2 eth0: addr 00:1a:80:57:41:ac [ 38.034412] input: PS/2 Mouse as /devices/virtual/input/input8 [ 38.049292] Bluetooth: Core ver 2.11 [ 38.049343] NET: Registered protocol family 31 [ 38.049344] Bluetooth: HCI device and connection manager initialized [ 38.049347] Bluetooth: HCI socket layer initialized [ 38.083348] Bluetooth: HCI USB driver ver 2.9 [ 38.085854] usbcore: registered new interface driver hci_usb [ 38.103125] usbcore: registered new interface driver libusual [ 38.108927] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 38.129836] Linux video capture interface: v2.00 [ 38.137411] Initializing USB Mass Storage driver... [ 38.137733] scsi5 : SCSI emulation for USB Mass Storage devices [ 38.137793] usbcore: registered new interface driver usb-storage [ 38.137796] USB Mass Storage support registered. [ 38.137798] usb-storage: device found at 2 [ 38.137799] usb-storage: waiting for device to settle before scanning [ 38.149940] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds [ 38.149943] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 38.150018] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 38.150027] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 38.150861] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 38.176979] ACPI: Battery Slot [BAT1] (battery present) [ 38.178630] ACPI: AC Adapter [ACAD] (on-line) [ 38.178651] sony-laptop: Sony Notebook Control Driver v0.5. [ 38.234569] uvcvideo: Found UVC 1.00 device (05ca:183a) [ 38.235017] usbcore: registered new interface driver uvcvideo [ 38.235020] USB Video Class driver (v0.1.0) [ 38.345039] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 38.345878] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 38.988376] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 38.992546] phy0: Selected rate control algorithm 'iwl-4965-rs' [ 39.131421] lp: driver loaded but no devices found [ 39.213639] Adding 1903692k swap on /dev/sda4. Priority:-1 extents:1 across:1903692k [ 39.654134] EXT3 FS on sda1, internal journal [ 40.601503] kjournald starting. Commit interval 5 seconds [ 40.601702] EXT3 FS on sda2, internal journal [ 40.601706] EXT3-fs: mounted filesystem with ordered data mode. [ 40.632870] kjournald starting. Commit interval 5 seconds [ 40.633182] EXT3 FS on sda3, internal journal [ 40.633185] EXT3-fs: mounted filesystem with ordered data mode. [ 41.194255] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 41.199846] ACPI: ACPI Dock Station Driver [ 42.722205] ppdev: user-space parallel port driver [ 43.135463] usb-storage: device scan complete [ 43.139746] scsi 5:0:0:0: Direct-Access Sony USB HS-CARD 4.82 PQ: 0 ANSI: 0 [ 43.153135] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 43.153217] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 44.095124] sky2 eth0: enabling interface [ 44.197278] Bluetooth: L2CAP ver 2.9 [ 44.197288] Bluetooth: L2CAP socket layer initialized [ 44.341228] Bluetooth: RFCOMM socket layer initialized [ 44.341251] Bluetooth: RFCOMM TTY layer initialized [ 44.341255] Bluetooth: RFCOMM ver 1.8 [ 47.993870] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 80.319389] NET: Registered protocol family 10 [ 80.320048] lo: Disabled Privacy Extensions [ 80.321178] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 80.322316] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 95.537848] NET: Registered protocol family 17 [ 95.980157] CPU0 attaching NULL sched-domain. [ 95.980161] CPU1 attaching NULL sched-domain. [ 96.003858] CPU0 attaching sched-domain: [ 96.003862] domain 0: span 03 [ 96.003864] groups: 01 02 [ 96.003866] domain 1: span 03 [ 96.003867] groups: 03 [ 96.003869] CPU1 attaching sched-domain: [ 96.003870] domain 0: span 03 [ 96.003871] groups: 02 01 [ 96.003873] domain 1: span 03 [ 96.003874] groups: 03 [ 97.351344] wlan0: Initial auth_alg=0 [ 97.351357] wlan0: authenticate with AP 00:16:01:59:bd:a4 [ 97.354868] wlan0: RX authentication from 00:16:01:59:bd:a4 (alg=0 transaction=2 status=0) [ 97.354875] wlan0: authenticated [ 97.354879] wlan0: associate with AP 00:16:01:59:bd:a4 [ 97.357948] wlan0: RX AssocResp from 00:16:01:59:bd:a4 (capab=0x411 status=0 aid=1) [ 97.357955] wlan0: associated [ 97.357961] wlan0: switched to short barker preamble (BSSID=00:16:01:59:bd:a4) [ 97.369852] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 112.753434] wlan0: no IPv6 routers present