[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e8 with crng_init=0 [ 0.000000] Linux version 4.13.0-16-lowlatency (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP PREEMPT Wed Oct 11 19:51:52 UTC 2017 (Ubuntu 4.13.0-16.19-lowlatency 4.13.4) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-16-lowlatency root=UUID=23900d78-4c59-4f7b-a317-4dd19bd68a7e ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009dc77fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009dc78000-0x000000009dc7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009dc7f000-0x000000009e0defff] usable [ 0.000000] BIOS-e820: [mem 0x000000009e0df000-0x000000009e554fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009e555000-0x00000000bdbb1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdbb2000-0x00000000bddc4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bddc5000-0x00000000bdde2fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bdde3000-0x00000000be30bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be30c000-0x00000000beffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUS All Series/Z97-AR, BIOS 2801 11/11/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back [ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back [ 0.000000] 3 base 0430000000 mask 7FF8000000 write-back [ 0.000000] 4 base 0438000000 mask 7FFC000000 write-back [ 0.000000] 5 base 043C000000 mask 7FFE000000 write-back [ 0.000000] 6 base 043E000000 mask 7FFF000000 write-back [ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 16368M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff9b1e400fd8c0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff9b1e40097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x124750000, 0x124750fff] PGTABLE [ 0.000000] BRK [0x124751000, 0x124751fff] PGTABLE [ 0.000000] BRK [0x124752000, 0x124752fff] PGTABLE [ 0.000000] BRK [0x124753000, 0x124753fff] PGTABLE [ 0.000000] BRK [0x124754000, 0x124754fff] PGTABLE [ 0.000000] BRK [0x124755000, 0x124755fff] PGTABLE [ 0.000000] BRK [0x124756000, 0x124756fff] PGTABLE [ 0.000000] BRK [0x124757000, 0x124757fff] PGTABLE [ 0.000000] BRK [0x124758000, 0x124758fff] PGTABLE [ 0.000000] BRK [0x124759000, 0x124759fff] PGTABLE [ 0.000000] BRK [0x12475a000, 0x12475afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31ca1000-0x34e47fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BDDCB088 00008C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BDDDAE08 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BDDCB1B0 00FC58 (v02 ALASKA A M I 00000011 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000BE30BF80 000040 [ 0.000000] ACPI: APIC 0x00000000BDDDAF18 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BDDDAFB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000BDDDAFF8 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BDDDBC78 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BDDDC1B8 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000BDDDCD30 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000BDDDCEF8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BDDDCF38 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000BDDDCF70 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BDDDD2E0 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: DMAR 0x00000000BDDE2CF8 000080 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000BDDE2CB0 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x43efd5000-0x43effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000043effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009dc77fff] [ 0.000000] node 0: [mem 0x000000009dc7f000-0x000000009e0defff] [ 0.000000] node 0: [mem 0x000000009e555000-0x00000000bdbb1fff] [ 0.000000] node 0: [mem 0x00000000befff000-0x00000000beffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff] [ 0.000000] On node 0 totalpages: 4179666 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12061 pages used for memmap [ 0.000000] DMA32 zone: 771894 pages, LIFO batch:31 [ 0.000000] Normal zone: 53184 pages used for memmap [ 0.000000] Normal zone: 3403776 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9dc78000-0x9dc7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e0df000-0x9e554fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdbb2000-0xbddc4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbddc5000-0xbdde2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdde3000-0xbe30bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe30c000-0xbeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff9b227ec00000 s120088 r8192 d31464 u262144 [ 0.000000] pcpu-alloc: s120088 r8192 d31464 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4114336 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-16-lowlatency root=UUID=23900d78-4c59-4f7b-a317-4dd19bd68a7e ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16316284K/16718664K available (9348K kernel code, 2713K rwdata, 3996K rodata, 2256K init, 2400K bss, 402380K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37720 entries in 148 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3597.576 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7195.15 BogoMIPS (lpj=3597576) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170531 [ 0.010245] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.010262] Security Framework initialized [ 0.010263] Yama: becoming mindful. [ 0.010274] AppArmor: AppArmor initialized [ 0.012315] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.013336] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013372] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.013404] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.013535] CPU: Physical Processor ID: 0 [ 0.013535] CPU: Processor Core ID: 0 [ 0.013538] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.013538] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.013542] mce: CPU supports 9 MCE banks [ 0.013548] CPU0: Thermal monitoring enabled (TM1) [ 0.013557] process: using mwait in idle threads [ 0.013559] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.013559] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.013919] Freeing SMP alternatives memory: 32K [ 0.015049] smpboot: Max logical packages: 2 [ 0.015053] DMAR: Host address width 39 [ 0.015054] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.015060] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.015060] DMAR: RMRR base: 0x000000bdd51000 end: 0x000000bdd5efff [ 0.015062] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.015062] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.015063] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.015063] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.015203] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.015204] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.015582] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026000] smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.029017] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.029031] ... version: 3 [ 0.029031] ... bit width: 48 [ 0.029031] ... generic registers: 4 [ 0.029032] ... value mask: 0000ffffffffffff [ 0.029032] ... max period: 00007fffffffffff [ 0.029032] ... fixed-purpose events: 3 [ 0.029033] ... event mask: 000000070000000f [ 0.031015] Hierarchical SRCU implementation. [ 0.035098] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.037015] smp: Bringing up secondary CPUs ... [ 0.045020] x86: Booting SMP configuration: [ 0.045021] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.093429] smp: Brought up 1 node, 8 CPUs [ 0.093429] smpboot: Total of 8 processors activated (57561.21 BogoMIPS) [ 0.094311] devtmpfs: initialized [ 0.094311] x86/mm: Memory block size: 128MB [ 0.095461] evm: security.selinux [ 0.095461] evm: security.SMACK64 [ 0.095462] evm: security.SMACK64EXEC [ 0.095462] evm: security.SMACK64TRANSMUTE [ 0.095462] evm: security.SMACK64MMAP [ 0.095463] evm: security.ima [ 0.095463] evm: security.capability [ 0.095475] PM: Registering ACPI NVS region [mem 0x9dc78000-0x9dc7efff] (28672 bytes) [ 0.095475] PM: Registering ACPI NVS region [mem 0xbdde3000-0xbe30bfff] (5410816 bytes) [ 0.095475] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.095475] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.095475] pinctrl core: initialized pinctrl subsystem [ 0.095475] RTC time: 10:15:26, date: 10/19/17 [ 0.095475] NET: Registered protocol family 16 [ 0.095475] cpuidle: using governor ladder [ 0.095475] cpuidle: using governor menu [ 0.095475] PCCT header not found. [ 0.095475] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.095475] ACPI: bus type PCI registered [ 0.095475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.095475] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.095475] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.095475] PCI: Using configuration type 1 for base access [ 0.095475] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.096420] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.096420] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.097004] ACPI: Added _OSI(Module Device) [ 0.097004] ACPI: Added _OSI(Processor Device) [ 0.097004] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.097004] ACPI: Added _OSI(Processor Aggregator Device) [ 0.097170] ACPI: Executed 4 blocks of module-level executable AML code [ 0.101087] ACPI: Dynamic OEM Table Load: [ 0.101091] ACPI: SSDT 0xFFFF9B226BF03C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.101168] ACPI: Dynamic OEM Table Load: [ 0.101172] ACPI: SSDT 0xFFFF9B226BD7C800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.101355] ACPI: Dynamic OEM Table Load: [ 0.101355] ACPI: SSDT 0xFFFF9B226BEBF800 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.102406] ACPI: EC: EC started [ 0.102407] ACPI: EC: interrupt blocked [ 0.102416] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.102417] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.102418] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.102418] ACPI: Interpreter enabled [ 0.102442] ACPI: (supports S0 S3 S4 S5) [ 0.102443] ACPI: Using IOAPIC for interrupt routing [ 0.102462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.102658] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.103235] ACPI: Power Resource [PG00] (on) [ 0.103415] ACPI: Power Resource [PG01] (on) [ 0.103585] ACPI: Power Resource [PG02] (on) [ 0.108747] ACPI: Power Resource [FN00] (off) [ 0.108790] ACPI: Power Resource [FN01] (off) [ 0.108832] ACPI: Power Resource [FN02] (off) [ 0.108873] ACPI: Power Resource [FN03] (off) [ 0.108912] ACPI: Power Resource [FN04] (off) [ 0.109591] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.109594] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.109732] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.109815] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.109816] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.110195] PCI host bridge to bus 0000:00 [ 0.110196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.110197] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.110198] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.110198] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.110199] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.110200] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.110200] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.110201] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.110201] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.110202] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.110203] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.110207] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.110262] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.110287] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.110370] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330 [ 0.110387] pci 0000:00:14.0: reg 0x10: [mem 0xdff20000-0xdff2ffff 64bit] [ 0.110435] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.110480] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000 [ 0.110497] pci 0000:00:16.0: reg 0x10: [mem 0xdff3a000-0xdff3a00f 64bit] [ 0.110548] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.110603] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000 [ 0.110618] pci 0000:00:19.0: reg 0x10: [mem 0xdff00000-0xdff1ffff] [ 0.110623] pci 0000:00:19.0: reg 0x14: [mem 0xdff38000-0xdff38fff] [ 0.110629] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.110675] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.110719] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320 [ 0.110736] pci 0000:00:1a.0: reg 0x10: [mem 0xdff37000-0xdff373ff] [ 0.110805] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.110851] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300 [ 0.110866] pci 0000:00:1b.0: reg 0x10: [mem 0xdff30000-0xdff33fff 64bit] [ 0.110922] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.110974] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400 [ 0.111034] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.111104] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.111160] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.111229] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320 [ 0.111246] pci 0000:00:1d.0: reg 0x10: [mem 0xdff36000-0xdff363ff] [ 0.111315] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.111366] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100 [ 0.111498] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601 [ 0.111511] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.111516] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.111521] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.111526] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.111532] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.111537] pci 0000:00:1f.2: reg 0x24: [mem 0xdff35000-0xdff357ff] [ 0.111564] pci 0000:00:1f.2: PME# supported from D3hot [ 0.111607] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500 [ 0.111620] pci 0000:00:1f.3: reg 0x10: [mem 0xdff34000-0xdff340ff 64bit] [ 0.111636] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.111718] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000 [ 0.111734] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.111741] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.111746] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.111750] pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff] [ 0.111754] pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref] [ 0.111792] pci 0000:01:00.0: supports D1 D2 [ 0.111793] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.111833] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.111847] pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit] [ 0.111895] pci 0000:01:00.1: supports D1 D2 [ 0.115016] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.115016] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.115016] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.115017] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.115019] acpiphp: Slot [1] registered [ 0.115023] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.115070] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401 [ 0.115197] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode) [ 0.115203] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.115204] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.115205] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.115205] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.115206] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.115206] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.115207] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.115208] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.115208] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.115209] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.115294] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.115310] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.115310] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.115311] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.115312] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.115312] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.115313] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.115313] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.115314] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.115315] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.115315] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.115790] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.115821] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.115851] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.115880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.115909] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.115938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.115967] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.115996] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.116212] ACPI: EC: interrupt unblocked [ 0.116216] ACPI: EC: event unblocked [ 0.116220] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.116221] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.116336] SCSI subsystem initialized [ 0.116344] libata version 3.00 loaded. [ 0.116344] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.116344] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.116344] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.116344] vgaarb: loaded [ 0.116344] ACPI: bus type USB registered [ 0.116344] usbcore: registered new interface driver usbfs [ 0.116344] usbcore: registered new interface driver hub [ 0.116344] usbcore: registered new device driver usb [ 0.116344] EDAC MC: Ver: 3.0.0 [ 0.116344] PCI: Using ACPI for IRQ routing [ 0.121471] PCI: pci_cache_line_size set to 64 bytes [ 0.121501] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.121501] e820: reserve RAM buffer [mem 0x9dc78000-0x9fffffff] [ 0.121502] e820: reserve RAM buffer [mem 0x9e0df000-0x9fffffff] [ 0.121502] e820: reserve RAM buffer [mem 0xbdbb2000-0xbfffffff] [ 0.121503] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff] [ 0.121504] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.121547] NetLabel: Initializing [ 0.121548] NetLabel: domain hash size = 128 [ 0.121548] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.121557] NetLabel: unlabeled traffic allowed by default [ 0.122022] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.122025] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.124010] clocksource: Switched to clocksource hpet [ 0.130520] VFS: Disk quotas dquot_6.6.0 [ 0.130530] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.130588] AppArmor: AppArmor Filesystem Enabled [ 0.130609] pnp: PnP ACPI init [ 0.130677] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.130679] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.130737] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.130738] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130749] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.130770] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.130771] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.130832] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.130833] system 00:04: [io 0x02a0-0x02af] has been reserved [ 0.130834] system 00:04: [io 0x0a00-0x0aff] has been reserved [ 0.130835] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130863] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.130865] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131016] pnp 00:06: [dma 0 disabled] [ 0.131041] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.131223] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.131224] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.131225] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.131226] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.131227] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.131228] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.131228] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.131229] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.131230] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.131231] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.131231] system 00:07: [mem 0xdffe0000-0xdffeffff] has been reserved [ 0.131232] system 00:07: [mem 0xdfff0000-0xdfffffff] has been reserved [ 0.131234] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131338] pnp: PnP ACPI: found 8 devices [ 0.136793] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.136818] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.136819] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.136821] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.136822] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.136825] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.136832] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.136847] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.136854] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.136855] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.136856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.136857] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.136857] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.136858] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.136858] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.136859] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.136860] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.136860] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfeafffff window] [ 0.136861] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.136862] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff] [ 0.136862] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.136863] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.136864] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.136864] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.136865] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.136866] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.136866] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.136867] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.136868] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.136868] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.136869] pci_bus 0000:03: resource 13 [mem 0xc0000000-0xfeafffff window] [ 0.136870] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.136870] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.136871] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.136872] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.136872] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.136873] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.136873] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.136874] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.136875] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.136875] pci_bus 0000:04: resource 13 [mem 0xc0000000-0xfeafffff window] [ 0.136942] NET: Registered protocol family 2 [ 0.137048] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.137159] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.137246] TCP: Hash tables configured (established 131072 bind 65536) [ 0.137271] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.137301] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.137347] NET: Registered protocol family 1 [ 0.169088] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.169093] PCI: CLS 64 bytes, default 64 [ 0.169118] Unpacking initramfs... [ 0.659901] Freeing initrd memory: 50844K [ 0.659924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.659925] software IO TLB [mem 0xb9bb2000-0xbdbb2000] (64MB) mapped at [ffff9b1ef9bb2000-ffff9b1efdbb1fff] [ 0.660151] Scanning for low memory corruption every 60 seconds [ 0.660347] audit: initializing netlink subsys (disabled) [ 0.660374] audit: type=2000 audit(1508408126.660:1): state=initialized audit_enabled=0 res=1 [ 0.660598] Initialise system trusted keyrings [ 0.660604] Key type blacklist registered [ 0.660624] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.661289] zbud: loaded [ 0.661507] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.661584] fuse init (API version 7.26) [ 0.662390] Key type asymmetric registered [ 0.662391] Asymmetric key parser 'x509' registered [ 0.662407] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.662430] io scheduler noop registered [ 0.662430] io scheduler deadline registered [ 0.662444] io scheduler cfq registered (default) [ 0.662760] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.662761] vesafb: scrolling: redraw [ 0.662762] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.662767] vesafb: framebuffer at 0xc0000000, mapped to 0xffffac3b02800000, using 5120k, total 5120k [ 0.662815] Console: switching to colour frame buffer device 160x64 [ 0.662827] fb0: VESA VGA frame buffer device [ 0.662833] intel_idle: MWAIT substates: 0x42120 [ 0.662834] intel_idle: v0.4.1 model 0x3C [ 0.663006] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.663078] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.663084] ACPI: Power Button [PWRB] [ 0.663101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.663116] ACPI: Power Button [PWRF] [ 0.663511] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.663593] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.663594] ACPI: Thermal Zone [TZ00] (28 C) [ 0.663721] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.663722] ACPI: Thermal Zone [TZ01] (30 C) [ 0.663745] GHES: HEST is not enabled! [ 0.663793] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.684372] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.685302] Linux agpgart interface v0.103 [ 0.686409] loop: module loaded [ 0.686490] libphy: Fixed MDIO Bus: probed [ 0.686490] tun: Universal TUN/TAP device driver, 1.6 [ 0.686517] PPP generic driver version 2.4.2 [ 0.686547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.686549] ehci-pci: EHCI PCI platform driver [ 0.686611] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.686614] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.686622] ehci-pci 0000:00:1a.0: debug port 2 [ 0.690510] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.690565] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdff37000 [ 0.697030] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.697057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.697058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.697059] usb usb1: Product: EHCI Host Controller [ 0.697059] usb usb1: Manufacturer: Linux 4.13.0-16-lowlatency ehci_hcd [ 0.697060] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.697159] hub 1-0:1.0: USB hub found [ 0.697162] hub 1-0:1.0: 2 ports detected [ 0.697292] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.697294] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.697302] ehci-pci 0000:00:1d.0: debug port 2 [ 0.701190] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.701248] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdff36000 [ 0.708033] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.708051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.708052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.708053] usb usb2: Product: EHCI Host Controller [ 0.708053] usb usb2: Manufacturer: Linux 4.13.0-16-lowlatency ehci_hcd [ 0.708054] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.708115] hub 2-0:1.0: USB hub found [ 0.708117] hub 2-0:1.0: 2 ports detected [ 0.708180] ehci-platform: EHCI generic platform driver [ 0.708186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.708187] ohci-pci: OHCI PCI platform driver [ 0.708191] ohci-platform: OHCI generic platform driver [ 0.708194] uhci_hcd: USB Universal Host Controller Interface driver [ 0.708262] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.708264] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.709331] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.709334] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.709488] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.709489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.709490] usb usb3: Product: xHCI Host Controller [ 0.709490] usb usb3: Manufacturer: Linux 4.13.0-16-lowlatency xhci-hcd [ 0.709491] usb usb3: SerialNumber: 0000:00:14.0 [ 0.709547] hub 3-0:1.0: USB hub found [ 0.709561] hub 3-0:1.0: 14 ports detected [ 0.709875] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.709878] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.709900] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.709900] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.709901] usb usb4: Product: xHCI Host Controller [ 0.709901] usb usb4: Manufacturer: Linux 4.13.0-16-lowlatency xhci-hcd [ 0.709902] usb usb4: SerialNumber: 0000:00:14.0 [ 0.709956] hub 4-0:1.0: USB hub found [ 0.709965] hub 4-0:1.0: 6 ports detected [ 0.710228] i8042: PNP: No PS/2 controller found. [ 0.710268] mousedev: PS/2 mouse device common for all mice [ 0.710338] rtc_cmos 00:02: RTC can wake from S4 [ 0.710433] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.710488] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.710491] i2c /dev entries driver [ 0.710514] device-mapper: uevent: version 1.0.3 [ 0.710549] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com [ 0.710552] intel_pstate: Intel P-state driver initializing [ 0.711002] ledtrig-cpu: registered to indicate activity on CPUs [ 0.711278] NET: Registered protocol family 10 [ 0.713868] Segment Routing with IPv6 [ 0.713876] NET: Registered protocol family 17 [ 0.713880] Key type dns_resolver registered [ 0.714173] RAS: Correctable Errors collector initialized. [ 0.714186] microcode: sig=0x306c3, pf=0x2, revision=0x19 [ 0.714293] microcode: Microcode Update Driver: v2.2. [ 0.714299] sched_clock: Marking stable (714290497, 0)->(855365128, -141074631) [ 0.714429] registered taskstats version 1 [ 0.714433] Loading compiled-in X.509 certificates [ 0.715847] Loaded X.509 cert 'Build time autogenerated kernel key: 5ef6d8d1e83e05cf534a502d8331a53104ec3ea6' [ 0.715857] zswap: loaded using pool lzo/zbud [ 0.716801] Key type big_key registered [ 0.716803] Key type trusted registered [ 0.717705] Key type encrypted registered [ 0.717706] AppArmor: AppArmor sha1 policy hashing enabled [ 0.717707] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.717716] evm: HMAC attrs: 0x1 [ 0.717932] Magic number: 5:232:275 [ 0.717948] tty tty12: hash matches [ 0.717952] edac mc: hash matches [ 0.718022] rtc_cmos 00:02: setting system clock to 2017-10-19 10:15:27 UTC (1508408127) [ 0.718086] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.718086] EDD information not available. [ 0.718117] PM: Hibernation image not present or could not be loaded. [ 0.719383] Freeing unused kernel memory: 2256K [ 0.719384] Write protecting the kernel read-only data: 14336k [ 0.719602] Freeing unused kernel memory: 880K [ 0.719746] Freeing unused kernel memory: 100K [ 0.720751] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.768220] pps_core: LinuxPPS API ver. 1 registered [ 0.768221] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.769240] PTP clock support registered [ 0.769730] ahci 0000:00:1f.2: version 3.0 [ 0.769900] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 0.769902] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.773146] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.773147] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.773800] AVX2 version of gcm_enc/dec engaged. [ 0.773801] AES CTR mode by8 optimization enabled [ 0.777782] scsi host0: ahci [ 0.777863] scsi host1: ahci [ 0.777942] scsi host2: ahci [ 0.778022] scsi host3: ahci [ 0.778075] scsi host4: ahci [ 0.778186] scsi host5: ahci [ 0.778215] ata1: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 26 [ 0.778217] ata2: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 26 [ 0.778218] ata3: DUMMY [ 0.778218] ata4: DUMMY [ 0.778220] ata5: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35300 irq 26 [ 0.778221] ata6: DUMMY [ 0.778407] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.794775] [drm] amdgpu kernel modesetting enabled. [ 0.795877] AMD IOMMUv2 driver by Joerg Roedel [ 0.795877] AMD IOMMUv2 functionality not available on this system [ 0.797638] CRAT table not found [ 0.797638] Finished initializing topology ret=0 [ 0.797649] kfd kfd: Initialized module [ 0.797731] checking generic (c0000000 500000) vs hw (c0000000 10000000) [ 0.797732] fb: switching to amdgpudrmfb from VESA VGA [ 0.797745] Console: switching to colour dummy device 80x25 [ 0.797901] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7). [ 0.797907] [drm] register mmio base: 0xDFE00000 [ 0.797908] [drm] register mmio size: 262144 [ 0.797913] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e [ 0.797913] [drm] probing mlw for device 8086:c01 = 261ad03 [ 0.797918] [drm] UVD is enabled in VM mode [ 0.797918] [drm] VCE enabled in VM mode [ 0.849486] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.917062] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:6d:34:b9 [ 0.917065] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.917097] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.917596] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 0.926086] [drm] BIOS signature incorrect 1e 0 [ 0.926088] amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 0.926122] ATOM BIOS: 113-58085SSB1-W80 [ 0.926126] [drm] GPU post is not needed [ 0.926350] [drm] vm size is 64 GB, block size is 13-bit [ 0.926372] amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used) [ 0.926372] amdgpu 0000:01:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF [ 0.926375] [drm] Detected VRAM RAM=8192M, BAR=256M [ 0.926375] [drm] RAM width 256bits GDDR5 [ 0.926449] [TTM] Zone kernel: Available graphics memory: 8185198 kiB [ 0.926450] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 0.926450] [TTM] Initializing pool allocator [ 0.926452] [TTM] Initializing DMA pool allocator [ 0.926472] [drm] amdgpu: 8192M of VRAM memory ready [ 0.926473] [drm] amdgpu: 8192M of GTT memory ready. [ 0.926477] [drm] GART: num cpu pages 2097152, num gpu pages 2097152 [ 0.927632] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000). [ 0.927642] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.927642] [drm] Driver supports precise vblank timestamp query. [ 0.927662] amdgpu 0000:01:00.0: amdgpu: using MSI. [ 0.927705] [drm] amdgpu: irq initialized. [ 1.007052] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.023059] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.028555] amdgpu: [powerplay] amdgpu: powerplay sw initialized [ 1.028890] [drm] AMDGPU Display Connectors [ 1.028890] [drm] Connector 0: [ 1.028890] [drm] DP-1 [ 1.028891] [drm] HPD6 [ 1.028891] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [ 1.028892] [drm] Encoders: [ 1.028892] [drm] DFP1: INTERNAL_UNIPHY2 [ 1.028892] [drm] Connector 1: [ 1.028892] [drm] DP-2 [ 1.028893] [drm] HPD4 [ 1.028893] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [ 1.028893] [drm] Encoders: [ 1.028894] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.028894] [drm] Connector 2: [ 1.028894] [drm] DP-3 [ 1.028895] [drm] HPD1 [ 1.028895] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f [ 1.028895] [drm] Encoders: [ 1.028896] [drm] DFP3: INTERNAL_UNIPHY1 [ 1.028896] [drm] Connector 3: [ 1.028896] [drm] HDMI-A-1 [ 1.028896] [drm] HPD5 [ 1.028897] [drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877 [ 1.028897] [drm] Encoders: [ 1.028897] [drm] DFP4: INTERNAL_UNIPHY1 [ 1.028898] [drm] Connector 4: [ 1.028898] [drm] DVI-D-1 [ 1.028898] [drm] HPD3 [ 1.028899] [drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f [ 1.028899] [drm] Encoders: [ 1.028899] [drm] DFP5: INTERNAL_UNIPHY [ 1.029062] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000008, cpu addr 0xffff9b22604d4008 [ 1.029096] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000018, cpu addr 0xffff9b22604d4018 [ 1.029115] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000028, cpu addr 0xffff9b22604d4028 [ 1.029136] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000038, cpu addr 0xffff9b22604d4038 [ 1.029160] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000048, cpu addr 0xffff9b22604d4048 [ 1.029182] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000058, cpu addr 0xffff9b22604d4058 [ 1.029197] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000068, cpu addr 0xffff9b22604d4068 [ 1.029219] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000078, cpu addr 0xffff9b22604d4078 [ 1.029233] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000088, cpu addr 0xffff9b22604d4088 [ 1.029244] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x000000020000009c, cpu addr 0xffff9b22604d409c [ 1.029298] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000ac, cpu addr 0xffff9b22604d40ac [ 1.029314] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000002000000bc, cpu addr 0xffff9b22604d40bc [ 1.029372] [drm] Found UVD firmware Version: 1.79 Family ID: 16 [ 1.029604] amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x000000000122d420, cpu addr 0xffffac3b02a5a420 [ 1.029639] [drm] Found VCE firmware Version: 52.4 Binary ID: 3 [ 1.029686] amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000dc, cpu addr 0xffff9b22604d40dc [ 1.029699] amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x00000002000000ec, cpu addr 0xffff9b22604d40ec [ 1.068992] amdgpu: [powerplay] [AVFS] Something is broken. See log! [ 1.070892] amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table! [ 1.071856] amdgpu: [powerplay] VDDCI is larger than max VDDCI in VDDCI Voltage Table! [ 1.075121] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.082528] [drm] ring test on 0 succeeded in 14 usecs [ 1.083002] [drm] ring test on 9 succeeded in 9 usecs [ 1.083019] [drm] ring test on 1 succeeded in 8 usecs [ 1.083027] [drm] ring test on 2 succeeded in 3 usecs [ 1.083039] [drm] ring test on 3 succeeded in 3 usecs [ 1.083046] [drm] ring test on 4 succeeded in 3 usecs [ 1.083060] [drm] ring test on 5 succeeded in 6 usecs [ 1.083067] [drm] ring test on 6 succeeded in 3 usecs [ 1.083075] [drm] ring test on 7 succeeded in 3 usecs [ 1.083083] [drm] ring test on 8 succeeded in 3 usecs [ 1.083124] [drm] ring test on 10 succeeded in 6 usecs [ 1.083130] [drm] ring test on 11 succeeded in 5 usecs [ 1.084532] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.084585] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.084622] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.086197] ata1.00: supports DRM functions and may not be fully accessible [ 1.086259] ata2.00: supports DRM functions and may not be fully accessible [ 1.086372] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 1.086376] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550) [ 1.086564] ata5.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133 [ 1.086565] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.086593] ata1.00: NCQ Send/Recv Log not supported [ 1.086594] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 1.086594] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.086647] ata2.00: NCQ Send/Recv Log not supported [ 1.086647] ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 1.086648] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.087711] ata1.00: supports DRM functions and may not be fully accessible [ 1.087772] ata2.00: supports DRM functions and may not be fully accessible [ 1.088049] ata1.00: NCQ Send/Recv Log not supported [ 1.088111] ata2.00: NCQ Send/Recv Log not supported [ 1.088414] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 1.088417] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550) [ 1.088618] ata5.00: configured for UDMA/133 [ 1.088841] ata1.00: configured for UDMA/133 [ 1.088898] ata2.00: configured for UDMA/133 [ 1.089025] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.115194] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.115199] sd 0:0:0:0: [sda] Write Protect is off [ 1.115200] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.115217] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.115234] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.115473] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.115712] sda: sda1 sda2 < sda5 > [ 1.116172] sd 0:0:0:0: [sda] supports TCG Opal [ 1.116174] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.120000] [drm] ring test on 12 succeeded in 1 usecs [ 1.120001] [drm] UVD initialized successfully. [ 1.125427] usb 1-1: New USB device found, idVendor=8087, idProduct=8009 [ 1.125428] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.125674] hub 1-1:1.0: USB hub found [ 1.125768] hub 1-1:1.0: 6 ports detected [ 1.141428] usb 2-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.141429] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.141713] hub 2-1:1.0: USB hub found [ 1.141807] hub 2-1:1.0: 8 ports detected [ 1.143145] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.143149] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.143149] sd 1:0:0:0: [sdb] Write Protect is off [ 1.143161] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.143167] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.143306] scsi 4:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 1A01 PQ: 0 ANSI: 5 [ 1.143460] sdb: sdb1 sdb2 [ 1.143850] sd 1:0:0:0: [sdb] supports TCG Opal [ 1.143851] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.171175] sd 4:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.171176] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 1.171180] sd 4:0:0:0: [sdc] Write Protect is off [ 1.171181] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.171196] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.171236] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.225800] sdc: sdc1 [ 1.225947] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.230997] [drm] ring test on 13 succeeded in 7 usecs [ 1.231007] [drm] ring test on 14 succeeded in 3 usecs [ 1.231007] [drm] VCE initialized successfully. [ 1.231218] [drm] ib test on ring 0 succeeded [ 1.231357] [drm] ib test on ring 1 succeeded [ 1.231410] [drm] ib test on ring 2 succeeded [ 1.231458] [drm] ib test on ring 3 succeeded [ 1.231498] [drm] ib test on ring 4 succeeded [ 1.231546] [drm] ib test on ring 5 succeeded [ 1.231584] [drm] ib test on ring 6 succeeded [ 1.231622] [drm] ib test on ring 7 succeeded [ 1.231662] [drm] ib test on ring 8 succeeded [ 1.245339] usb 3-3: New USB device found, idVendor=0451, idProduct=8142 [ 1.245340] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.245340] usb 3-3: SerialNumber: 4B000051F0AD [ 1.245626] hub 3-3:1.0: USB hub found [ 1.245646] hub 3-3:1.0: 4 ports detected [ 1.349193] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.361342] usb 4-3: New USB device found, idVendor=0451, idProduct=8140 [ 1.361343] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.361862] hub 4-3:1.0: USB hub found [ 1.361887] hub 4-3:1.0: 4 ports detected [ 1.517102] usb 3-13: new high-speed USB device number 3 using xhci_hcd [ 1.693700] usb 3-13: New USB device found, idVendor=05ac, idProduct=1006 [ 1.693712] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.693713] usb 3-13: Product: Keyboard Hub [ 1.693713] usb 3-13: Manufacturer: Apple, Inc. [ 1.693714] usb 3-13: SerialNumber: 000000000000 [ 1.694165] hub 3-13:1.0: USB hub found [ 1.694187] hub 3-13:1.0: 3 ports detected [ 1.695105] tsc: Refined TSC clocksource calibration: 3597.914 MHz [ 1.695108] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33dca08a5e6, max_idle_ns: 440795278676 ns [ 1.735160] [drm] ib test on ring 9 succeeded [ 1.735272] [drm] ib test on ring 10 succeeded [ 1.735361] [drm] ib test on ring 11 succeeded [ 1.736741] [drm] ib test on ring 12 succeeded [ 1.736975] [drm] ib test on ring 13 succeeded [ 1.749129] usb 3-3.3: new high-speed USB device number 4 using xhci_hcd [ 1.825355] usb 3-3.3: New USB device found, idVendor=0451, idProduct=8027 [ 1.825356] usb 3-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.825356] usb 3-3.3: SerialNumber: 4B00087936CA [ 1.825723] hub 3-3.3:1.0: USB hub found [ 1.825749] hub 3-3.3:1.0: 2 ports detected [ 1.887640] [drm] fb mappable at 0xC1437000 [ 1.887641] [drm] vram apper at 0xC0000000 [ 1.887641] [drm] size 19906560 [ 1.887641] [drm] fb depth is 24 [ 1.887642] [drm] pitch is 13824 [ 1.887691] fbcon: amdgpudrmfb (fb0) is primary device [ 1.887744] Console: switching to colour frame buffer device 430x90 [ 1.887775] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device [ 1.890204] usb 4-3.3: new SuperSpeed USB device number 3 using xhci_hcd [ 1.897361] [drm] Initialized amdgpu 3.18.0 20150101 for 0000:01:00.0 on minor 0 [ 1.902527] usb 4-3.3: New USB device found, idVendor=0451, idProduct=8025 [ 1.902528] usb 4-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.903205] hub 4-3.3:1.0: USB hub found [ 1.903797] hub 4-3.3:1.0: 2 ports detected [ 2.058117] usb 3-14: new high-speed USB device number 5 using xhci_hcd [ 2.292097] usb 3-3.4: new full-speed USB device number 6 using xhci_hcd [ 2.393262] usb 3-3.4: New USB device found, idVendor=0451, idProduct=ca01 [ 2.393273] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.393274] usb 3-3.4: Product: Texas Instruments USBtoI2C Solution [ 2.393275] usb 3-3.4: Manufacturer: Texas Instruments [ 2.393275] usb 3-3.4: SerialNumber:  [ 2.436131] usb 3-13.2: new low-speed USB device number 7 using xhci_hcd [ 2.499422] usb 3-14: New USB device found, idVendor=046d, idProduct=0826 [ 2.499424] usb 3-14: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 2.499435] usb 3-14: Product: HD Webcam C525 [ 2.499435] usb 3-14: SerialNumber: AF850BA0 [ 2.502613] hidraw: raw HID events driver (C) Jiri Kosina [ 2.512595] usbcore: registered new interface driver usbhid [ 2.512596] usbhid: USB HID core driver [ 2.513705] hid-generic 0003:0451:CA01.0001: hiddev0,hidraw0: USB HID v1.00 Device [Texas Instruments Texas Instruments USBtoI2C Solution] on usb-0000:00:14.0-3.4/input0 [ 2.519629] usb 3-13.2: New USB device found, idVendor=05ac, idProduct=0250 [ 2.519631] usb 3-13.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.519631] usb 3-13.2: Product: Apple Keyboard [ 2.519632] usb 3-13.2: Manufacturer: Apple Inc. [ 2.589121] usb 3-13.3: new full-speed USB device number 8 using xhci_hcd [ 2.668259] usb 3-13.3: New USB device found, idVendor=046d, idProduct=c537 [ 2.668270] usb 3-13.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.668271] usb 3-13.3: Product: USB Receiver [ 2.668272] usb 3-13.3: Manufacturer: Logitech [ 2.670736] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3/3-13.3:1.0/0003:046D:C537.0004/input/input2 [ 2.670909] hid-generic 0003:046D:C537.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-13.3/input0 [ 2.673160] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.3/3-13.3:1.1/0003:046D:C537.0005/input/input3 [ 2.703301] clocksource: Switched to clocksource tsc [ 2.725350] hid-generic 0003:046D:C537.0005: input,hiddev1,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-13.3/input1 [ 2.726968] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.0/0003:05AC:0250.0002/input/input4 [ 2.778315] apple 0003:05AC:0250.0002: input,hidraw3: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-13.2/input0 [ 2.778386] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.2/3-13.2:1.1/0003:05AC:0250.0003/input/input5 [ 2.830305] apple 0003:05AC:0250.0003: input,hidraw4: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-13.2/input1 [ 23.107792] NET: Registered protocol family 38 [ 23.269705] random: crng init done [ 23.286068] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 23.376904] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.379591] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 23.379704] systemd[1]: Detected architecture x86-64. [ 23.379830] systemd[1]: Set hostname to . [ 23.448269] systemd[1]: Unnecessary job for /dev/mapper/sda5_crypt was removed. [ 23.448388] systemd[1]: Reached target Remote File Systems. [ 23.448442] systemd[1]: Listening on udev Control Socket. [ 23.448512] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 23.448964] systemd[1]: Created slice User and Session Slice. [ 23.448980] systemd[1]: Listening on fsck to fsckd communication Socket. [ 23.448993] systemd[1]: Listening on udev Kernel Socket. [ 23.463932] lp: driver loaded but no devices found [ 23.466798] ppdev: user-space parallel port driver [ 23.515417] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 23.527154] systemd-journald[444]: Received request to flush runtime journal from PID 1 [ 23.572026] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS [ 23.638853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.640988] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247) [ 23.640992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.640994] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247) [ 23.640997] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170531/utaddress-247) [ 23.641000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.641001] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247) [ 23.641003] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247) [ 23.641005] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170531/utaddress-247) [ 23.641008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.641008] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247) [ 23.641011] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247) [ 23.641013] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170531/utaddress-247) [ 23.641016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.641016] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 23.679143] asus_wmi: ASUS WMI generic driver loaded [ 23.680657] asus_wmi: Initialization: 0x0 [ 23.680681] asus_wmi: BIOS WMI version: 0.9 [ 23.680718] asus_wmi: SFUN value: 0x0 [ 23.681061] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6 [ 23.681293] asus_wmi: Number of fans: 1 [ 23.688663] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 23.688664] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 23.688665] RAPL PMU: hw unit of domain package 2^-14 Joules [ 23.688665] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 23.688665] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 23.739140] media: Linux media interface: v0.10 [ 23.745546] Linux video capture interface: v2.00 [ 23.755073] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 23.755074] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 23.757315] intel_rapl: Found RAPL domain package [ 23.757316] intel_rapl: Found RAPL domain core [ 23.757316] intel_rapl: Found RAPL domain dram [ 23.764169] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7 [ 23.764222] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8 [ 23.764269] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [ 23.764314] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [ 23.764358] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11 [ 23.764397] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [ 23.771175] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 23.771177] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.771179] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.771180] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 23.771181] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 23.771182] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 23.771183] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 23.771184] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 23.771185] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 23.784543] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 23.784601] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 23.784659] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 23.784712] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 23.784763] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 23.784820] usb 3-14: set resolution quirk: cval->res = 384 [ 23.784821] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 23.784887] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 23.786147] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826) [ 23.786148] usbcore: registered new interface driver snd-usb-audio [ 23.798285] uvcvideo 3-14:1.2: Entity type for entity Extension 5 was not initialized! [ 23.798287] uvcvideo 3-14:1.2: Entity type for entity Processing 2 was not initialized! [ 23.798288] uvcvideo 3-14:1.2: Entity type for entity Camera 1 was not initialized! [ 23.798289] uvcvideo 3-14:1.2: Entity type for entity Extension 6 was not initialized! [ 23.798290] uvcvideo 3-14:1.2: Entity type for entity Extension 7 was not initialized! [ 23.798291] uvcvideo 3-14:1.2: Entity type for entity Extension 8 was not initialized! [ 23.798375] input: HD Webcam C525 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.2/input/input20 [ 23.798446] usbcore: registered new interface driver uvcvideo [ 23.798447] USB Video Class driver (1.1.1) [ 23.951468] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 24.031365] audit: type=1400 audit(1508408150.813:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=1006 comm="apparmor_parser" [ 24.031383] audit: type=1400 audit(1508408150.813:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=1000 comm="apparmor_parser" [ 24.031412] audit: type=1400 audit(1508408150.813:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=999 comm="apparmor_parser" [ 24.032021] audit: type=1400 audit(1508408150.813:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2898/usr/lib/snapd/snap-confine" pid=1004 comm="apparmor_parser" [ 24.032023] audit: type=1400 audit(1508408150.813:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2898/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1004 comm="apparmor_parser" [ 24.032162] audit: type=1400 audit(1508408150.814:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2844/usr/lib/snapd/snap-confine" pid=1003 comm="apparmor_parser" [ 24.032163] audit: type=1400 audit(1508408150.814:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2844/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1003 comm="apparmor_parser" [ 24.032591] audit: type=1400 audit(1508408150.814:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=1010 comm="apparmor_parser" [ 24.032700] audit: type=1400 audit(1508408150.814:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3017/usr/lib/snapd/snap-confine" pid=1005 comm="apparmor_parser" [ 24.032703] audit: type=1400 audit(1508408150.814:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3017/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1005 comm="apparmor_parser" [ 24.456019] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 24.647241] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 26.184042] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 26.184044] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 26.184071] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 27.513829] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.514755] Bridge firewalling registered [ 27.519342] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 27.559832] Initializing XFRM netlink socket [ 27.563654] Netfilter messages via NETLINK v0.30. [ 27.564958] ctnetlink v0.93: registering with nfnetlink. [ 27.586006] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 52.605362] usb 3-14: reset high-speed USB device number 5 using xhci_hcd [ 54.059992] rfkill: input handler disabled [ 65.861661] rfkill: input handler enabled [ 77.405156] rfkill: input handler disabled [ 88.330696] rfkill: input handler enabled [ 97.647155] rfkill: input handler disabled