[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2016-04-29 [ 0.000000] Linux version 4.8.0-45-generic (buildd@lgw01-15) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #48-Ubuntu SMP Fri Mar 24 11:46:39 UTC 2017 (Ubuntu 4.8.0-45.48-generic 4.8.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=d9619f09-3283-4f88-a9aa-a614f1b40470 ro elevator=noop quiet i8042.noloop i8042.notimeout i8042.nomux psmouse.resolution=1200 psmouse.resetafter=1 psmouse.rate=50 mousedev.xres=1900 mousedev.yres=800 i8042.reset plymouth:debug drm.debug=0xe [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c4cefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009c4cf000-0x000000009c6cefff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000009c6cf000-0x000000009cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: SMBIOS=0x9c744000 ESRT=0x9c84e618 ACPI 2.0=0x9cffe014 [ 0.000000] esrt: Reserving ESRT space from 0x000000009c84e618 to 0x000000009c84e650. [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: SLIMBOOK EXCALIBUR/EXCALIBUR, BIOS h 11/21/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 14800M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff884580080000] 80000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x19ae3c000, 0x19ae3cfff] PGTABLE [ 0.000000] BRK [0x19ae3d000, 0x19ae3dfff] PGTABLE [ 0.000000] BRK [0x19ae3e000, 0x19ae3efff] PGTABLE [ 0.000000] BRK [0x19ae3f000, 0x19ae3ffff] PGTABLE [ 0.000000] BRK [0x19ae40000, 0x19ae40fff] PGTABLE [ 0.000000] BRK [0x19ae41000, 0x19ae41fff] PGTABLE [ 0.000000] BRK [0x19ae42000, 0x19ae42fff] PGTABLE [ 0.000000] BRK [0x19ae43000, 0x19ae43fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33100000-0x35877fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 OEM ID) [ 0.000000] ACPI: XSDT 0x000000009CFC4188 0000CC (v01 OEM ID OEMTBLID 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009CFF6000 00010C (v05 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000009CFD5000 01A7E4 (v02 OEM ID OEMTBLID 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000009CFB9000 000040 [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 OEM ID OEMTBLID 00000000 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 0x000000009CFF9000 000034 (v07 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000009CFF8000 000028 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x000000009CFF7000 000034 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x000000009CFF5000 000038 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x000000009CFF4000 000094 (v01 OEM ID OEMTBLID 00000000 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000009CFF3000 00008C (v03 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000009CFF2000 00003C (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x000000009CFF1000 000176 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT 0x000000009CFF0000 000224 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD1000 00342F (v02 OEM ID OEMTBLID 00001000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD0000 000BD3 (v02 OEM ID OEMTBLID 00001000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCF000 000539 (v02 OEM ID OEMTBLID 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCE000 000B74 (v02 OEM ID OEMTBLID 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFC8000 005D46 (v02 OEM ID OEMTBLID 00003000 ACPI 00040000) [ 0.000000] ACPI: DMAR 0x000000009CFC7000 0000D4 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000009CFC6000 000044 (v01 OEM ID OEMTBLID 00000002 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000009CFC5000 000038 (v01 OEM ID OEMTBLID 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25effb000-0x25effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009c4cefff] [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff] [ 0.000000] On node 0 totalpages: 2077780 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3972 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9940 pages used for memmap [ 0.000000] DMA32 zone: 636112 pages, LIFO batch:31 [ 0.000000] Normal zone: 22464 pages used for memmap [ 0.000000] Normal zone: 1437696 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c4cf000-0x9c6cefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9c6cf000-0x9cebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff8847dec00000 s107864 r8192 d31400 u262144 [ 0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2045289 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-45-generic.efi.signed root=UUID=d9619f09-3283-4f88-a9aa-a614f1b40470 ro elevator=noop quiet i8042.noloop i8042.notimeout i8042.nomux psmouse.resolution=1200 psmouse.resetafter=1 psmouse.rate=50 mousedev.xres=1900 mousedev.yres=800 i8042.reset plymouth:debug drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8012580K/8311120K available (8848K kernel code, 1441K rwdata, 3824K rodata, 1552K init, 1296K bss, 298540K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:760 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.168 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.33 BogoMIPS (lpj=10376672) [ 0.000024] pid_max: default: 32768 minimum: 301 [ 0.000035] ACPI: Core revision 20160422 [ 0.019716] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.020879] Security Framework initialized [ 0.020880] Yama: becoming mindful. [ 0.020895] AppArmor: AppArmor initialized [ 0.021275] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.022827] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023591] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023598] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023868] CPU: Physical Processor ID: 0 [ 0.023869] CPU: Processor Core ID: 0 [ 0.023873] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.023873] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.023877] mce: CPU supports 7 MCE banks [ 0.023884] CPU0: Thermal monitoring enabled (TM1) [ 0.023895] process: using mwait in idle threads [ 0.023897] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.023898] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.024561] Freeing SMP alternatives memory: 32K (ffffffffa2cee000 - ffffffffa2cf6000) [ 0.029598] ftrace: allocating 33424 entries in 131 pages [ 0.043568] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.043569] smpboot: Max logical packages: 4 [ 0.043578] DMAR: Host address width 39 [ 0.043579] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.043583] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.043584] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.043587] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.043588] DMAR: RMRR base: 0x0000009ce95000 end: 0x0000009ceb4fff [ 0.043589] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff [ 0.043589] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.043591] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.043592] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.043592] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.043593] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.044019] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.044020] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.044647] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084334] TSC deadline timer enabled [ 0.084336] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.084339] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.084362] ... version: 3 [ 0.084362] ... bit width: 48 [ 0.084363] ... generic registers: 4 [ 0.084363] ... value mask: 0000ffffffffffff [ 0.084364] ... max period: 00007fffffffffff [ 0.084364] ... fixed-purpose events: 3 [ 0.084365] ... event mask: 000000070000000f [ 0.085216] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.085281] x86: Booting SMP configuration: [ 0.085282] .... node #0, CPUs: #1 #2 #3 [ 0.093897] x86: Booted up 1 node, 4 CPUs [ 0.093899] smpboot: Total of 4 processors activated (20753.34 BogoMIPS) [ 0.098046] devtmpfs: initialized [ 0.098098] x86/mm: Memory block size: 128MB [ 0.100091] evm: security.selinux [ 0.100091] evm: security.SMACK64 [ 0.100092] evm: security.SMACK64EXEC [ 0.100092] evm: security.SMACK64TRANSMUTE [ 0.100092] evm: security.SMACK64MMAP [ 0.100093] evm: security.ima [ 0.100093] evm: security.capability [ 0.100189] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.100248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.100286] pinctrl core: initialized pinctrl subsystem [ 0.100371] RTC time: 7:16:24, date: 04/05/17 [ 0.100446] NET: Registered protocol family 16 [ 0.109877] cpuidle: using governor ladder [ 0.125880] cpuidle: using governor menu [ 0.125881] PCCT header not found. [ 0.125960] Simple Boot Flag at 0x44 set to 0x1 [ 0.125968] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.125969] ACPI: bus type PCI registered [ 0.125970] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.126018] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.126020] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.126028] PCI: Using configuration type 1 for base access [ 0.141967] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.141968] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.142152] ACPI: Added _OSI(Module Device) [ 0.142153] ACPI: Added _OSI(Processor Device) [ 0.142154] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.142154] ACPI: Added _OSI(Processor Aggregator Device) [ 0.142681] ACPI: Executed 17 blocks of module-level executable AML code [ 0.149591] ACPI: Dynamic OEM Table Load: [ 0.149598] ACPI: SSDT 0xFFFF8847D49A9400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.150390] ACPI: Dynamic OEM Table Load: [ 0.150396] ACPI: SSDT 0xFFFF8847D4985800 0005AA (v02 PmRef ApIst 00003000 INTL 20130117) [ 0.151216] ACPI: Dynamic OEM Table Load: [ 0.151221] ACPI: SSDT 0xFFFF8847D49CCE00 000119 (v02 PmRef ApCst 00003000 INTL 20130117) [ 0.152897] ACPI : EC: EC started [ 0.231297] ACPI: Interpreter enabled [ 0.231330] ACPI: (supports S0 S3 S4 S5) [ 0.231330] ACPI: Using IOAPIC for interrupt routing [ 0.231357] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.231788] ACPI: Power Resource [PG00] (on) [ 0.232165] ACPI: Power Resource [PG01] (on) [ 0.232520] ACPI: Power Resource [PG02] (on) [ 0.250675] ACPI: Power Resource [FN00] (off) [ 0.250738] ACPI: Power Resource [FN01] (off) [ 0.250797] ACPI: Power Resource [FN02] (off) [ 0.250856] ACPI: Power Resource [FN03] (off) [ 0.250916] ACPI: Power Resource [FN04] (off) [ 0.251629] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.251633] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.852163] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.852164] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.852745] PCI host bridge to bus 0000:00 [ 1.852746] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.852747] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.852748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.852749] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 1.852750] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 1.852751] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 1.852752] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 1.852752] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 1.852753] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 1.852754] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 1.852755] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 1.852756] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 1.852756] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 1.852757] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 1.852758] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 1.852759] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 1.852760] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 1.852761] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.852767] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 1.852990] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 1.852999] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 1.853004] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 1.853008] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 1.853233] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 1.853240] pci 0000:00:03.0: reg 0x10: [mem 0xc1310000-0xc1313fff 64bit] [ 1.853502] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 1.853517] pci 0000:00:14.0: reg 0x10: [mem 0xc1300000-0xc130ffff 64bit] [ 1.853571] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.853788] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 1.853805] pci 0000:00:16.0: reg 0x10: [mem 0xc1319000-0xc131901f 64bit] [ 1.853869] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.854101] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 1.854116] pci 0000:00:1b.0: reg 0x10: [mem 0xc1314000-0xc1317fff 64bit] [ 1.854169] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.854369] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 1.854403] pci 0000:00:1c.0: [8086:9c94] type 01 class 0x060400 [ 1.854463] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.854678] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.854712] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 1.854770] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.854989] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 1.855026] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 1.855191] pci 0000:00:1d.0: reg 0x10: [mem 0xc131d000-0xc131d3ff] [ 1.856147] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.856339] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.856374] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 1.856678] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 1.856689] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 1.856695] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 1.856701] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 1.856706] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 1.856712] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 1.856718] pci 0000:00:1f.2: reg 0x24: [mem 0xc131c000-0xc131c7ff] [ 1.856749] pci 0000:00:1f.2: PME# supported from D3hot [ 1.856951] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 1.856963] pci 0000:00:1f.3: reg 0x10: [mem 0xc1318000-0xc13180ff 64bit] [ 1.856980] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 1.857201] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 1.857227] pci 0000:00:1f.6: reg 0x10: [mem 0xc131b000-0xc131bfff 64bit] [ 1.857567] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 1.857584] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.857610] pci 0000:01:00.0: reg 0x18: [mem 0xc1200000-0xc1200fff 64bit] [ 1.857627] pci 0000:01:00.0: reg 0x20: [mem 0xc1000000-0xc1003fff 64bit pref] [ 1.857712] pci 0000:01:00.0: supports D1 D2 [ 1.857713] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.857761] pci 0000:01:00.0: System wakeup disabled by ACPI [ 1.867612] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.867614] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 1.867617] pci 0000:00:1c.0: bridge window [mem 0xc1200000-0xc12fffff] [ 1.867620] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc10fffff 64bit pref] [ 1.867735] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 1.867819] pci 0000:02:00.0: reg 0x10: [mem 0xc1100000-0xc1101fff 64bit] [ 1.868097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.868208] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.879677] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.879681] pci 0000:00:1c.3: bridge window [mem 0xc1100000-0xc11fffff] [ 1.883731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.883774] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.883813] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.883852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.883890] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.883927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.883964] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.884002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.884325] ACPI: Enabled 4 GPEs in block 00 to 7F [ 1.884360] ACPI : EC: EC stopped [ 1.884537] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 1.884537] ACPI : EC: EC started [ 1.965235] SCSI subsystem initialized [ 1.965268] libata version 3.00 loaded. [ 1.965295] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.965296] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.965298] vgaarb: loaded [ 1.965298] vgaarb: bridge control possible 0000:00:02.0 [ 1.965314] ACPI: bus type USB registered [ 1.965329] usbcore: registered new interface driver usbfs [ 1.965335] usbcore: registered new interface driver hub [ 1.965349] usbcore: registered new device driver usb [ 1.986187] PCI: Using ACPI for IRQ routing [ 1.991389] PCI: pci_cache_line_size set to 64 bytes [ 1.991531] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 1.991532] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 1.991533] e820: reserve RAM buffer [mem 0x9c4cf000-0x9fffffff] [ 1.991534] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 1.991535] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff] [ 1.991621] NetLabel: Initializing [ 1.991622] NetLabel: domain hash size = 128 [ 1.991622] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.991633] NetLabel: unlabeled traffic allowed by default [ 1.991768] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.991772] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.993791] clocksource: Switched to clocksource hpet [ 2.000091] VFS: Disk quotas dquot_6.6.0 [ 2.000109] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.000194] AppArmor: AppArmor Filesystem Enabled [ 2.000236] pnp: PnP ACPI init [ 2.004815] system 00:00: [io 0x06a4] has been reserved [ 2.004817] system 00:00: [io 0x06a0] has been reserved [ 2.004820] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.007224] system 00:01: [io 0x0680-0x069f] has been reserved [ 2.007225] system 00:01: [io 0xffff] has been reserved [ 2.007226] system 00:01: [io 0xffff] has been reserved [ 2.007227] system 00:01: [io 0xffff] has been reserved [ 2.007228] system 00:01: [io 0x1800-0x18fe] has been reserved [ 2.007229] system 00:01: [io 0x164e-0x164f] has been reserved [ 2.007231] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.007271] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.007306] system 00:03: [io 0x1854-0x1857] has been reserved [ 2.007307] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.007415] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.007434] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 (active) [ 2.007807] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.008124] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.008125] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.008126] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.008127] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.008128] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 2.008129] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.008131] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 2.008132] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.008133] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 2.008134] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.008135] system 00:07: [mem 0xa0010000-0xa001ffff] has been reserved [ 2.008136] system 00:07: [mem 0xa0000000-0xa000ffff] has been reserved [ 2.008137] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.008339] pnp: PnP ACPI: found 8 devices [ 2.014188] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.014205] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.014207] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 2.014210] pci 0000:00:1c.0: bridge window [mem 0xc1200000-0xc12fffff] [ 2.014213] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc10fffff 64bit pref] [ 2.014217] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 2.014220] pci 0000:00:1c.3: bridge window [mem 0xc1100000-0xc11fffff] [ 2.014227] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.014228] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.014229] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.014230] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 2.014231] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 2.014232] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 2.014233] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 2.014234] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 2.014235] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 2.014236] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 2.014236] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 2.014237] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 2.014238] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 2.014239] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 2.014240] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 2.014241] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 2.014242] pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfeafffff window] [ 2.014243] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 2.014244] pci_bus 0000:01: resource 1 [mem 0xc1200000-0xc12fffff] [ 2.014244] pci_bus 0000:01: resource 2 [mem 0xc1000000-0xc10fffff 64bit pref] [ 2.014246] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff] [ 2.014277] NET: Registered protocol family 2 [ 2.014420] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.014535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.014708] TCP: Hash tables configured (established 65536 bind 65536) [ 2.014731] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.014757] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.014811] NET: Registered protocol family 1 [ 2.014821] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.014893] pci 0000:00:14.0: can't derive routing for PCI INT A [ 2.014893] pci 0000:00:14.0: PCI INT A: not connected [ 2.033948] PCI: CLS 64 bytes, default 64 [ 2.033988] Unpacking initramfs... [ 2.598432] Freeing initrd memory: 40416K (ffff8845b3100000 - ffff8845b5878000) [ 2.599361] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 2.599371] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.599373] software IO TLB [mem 0x8f28e000-0x9328e000] (64MB) mapped at [ffff88460f28e000-ffff88461328dfff] [ 2.599587] Scanning for low memory corruption every 60 seconds [ 2.599850] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.599885] audit: initializing netlink subsys (disabled) [ 2.599897] audit: type=2000 audit(1491376584.996:1): initialized [ 2.600256] Initialise system trusted keyrings [ 2.600319] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.601555] zbud: loaded [ 2.601887] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.602040] fuse init (API version 7.25) [ 2.602141] Allocating IMA blacklist keyring. [ 2.602856] Key type asymmetric registered [ 2.602857] Asymmetric key parser 'x509' registered [ 2.602883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.602902] io scheduler noop registered (default) [ 2.602903] io scheduler deadline registered [ 2.602909] io scheduler cfq registered [ 2.603283] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.603284] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.603286] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 2.603301] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 2.603302] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.603304] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded [ 2.603311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.603314] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.603338] intel_idle: MWAIT substates: 0x11142120 [ 2.603339] intel_idle: v0.4.1 model 0x3D [ 2.603514] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.603575] ACPI: AC Adapter [ADP1] (off-line) [ 2.603628] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.604533] ACPI: Lid Switch [LID0] [ 2.604562] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.604564] ACPI: Sleep Button [SLPB] [ 2.604592] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.604593] ACPI: Power Button [PWRF] [ 2.605178] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.605180] ACPI: Thermal Zone [TZ00] (28 C) [ 2.605270] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.605271] ACPI: Thermal Zone [TZ01] (30 C) [ 2.605306] GHES: HEST is not enabled! [ 2.605361] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.608746] Linux agpgart interface v0.103 [ 2.610165] loop: module loaded [ 2.610300] libphy: Fixed MDIO Bus: probed [ 2.610301] tun: Universal TUN/TAP device driver, 1.6 [ 2.610302] tun: (C) 1999-2004 Max Krasnyansky [ 2.610324] PPP generic driver version 2.4.2 [ 2.610351] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.610353] ehci-pci: EHCI PCI platform driver [ 2.610447] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.610453] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.610463] ehci-pci 0000:00:1d.0: debug port 2 [ 2.614365] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.614375] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc131d000 [ 2.629786] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.629823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.629824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.629825] usb usb1: Product: EHCI Host Controller [ 2.629828] usb usb1: Manufacturer: Linux 4.8.0-45-generic ehci_hcd [ 2.629828] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.630036] hub 1-0:1.0: USB hub found [ 2.630040] hub 1-0:1.0: 2 ports detected [ 2.630149] ehci-platform: EHCI generic platform driver [ 2.630163] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.630166] ohci-pci: OHCI PCI platform driver [ 2.630174] ohci-platform: OHCI generic platform driver [ 2.630181] uhci_hcd: USB Universal Host Controller Interface driver [ 2.630273] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 2.630274] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 2.630294] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.630298] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.631362] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 2.631366] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.631434] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.631435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.631436] usb usb2: Product: xHCI Host Controller [ 2.631437] usb usb2: Manufacturer: Linux 4.8.0-45-generic xhci-hcd [ 2.631437] usb usb2: SerialNumber: 0000:00:14.0 [ 2.631535] hub 2-0:1.0: USB hub found [ 2.631544] hub 2-0:1.0: 11 ports detected [ 2.633855] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.633858] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.633881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.633881] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.633882] usb usb3: Product: xHCI Host Controller [ 2.633883] usb usb3: Manufacturer: Linux 4.8.0-45-generic xhci-hcd [ 2.633884] usb usb3: SerialNumber: 0000:00:14.0 [ 2.633976] hub 3-0:1.0: USB hub found [ 2.633982] hub 3-0:1.0: 4 ports detected [ 2.635248] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.638370] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.638373] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.638508] mousedev: PS/2 mouse device common for all mice [ 2.638697] rtc_cmos 00:02: RTC can wake from S4 [ 2.638825] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.638849] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.638854] i2c /dev entries driver [ 2.638895] device-mapper: uevent: version 1.0.3 [ 2.638967] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.638972] intel_pstate: Intel P-state driver initializing [ 2.639127] ledtrig-cpu: registered to indicate activity on CPUs [ 2.639129] EFI Variables Facility v0.08 2004-May-17 [ 2.657252] NET: Registered protocol family 10 [ 2.657392] NET: Registered protocol family 17 [ 2.657397] Key type dns_resolver registered [ 2.657574] microcode: sig=0x306d4, pf=0x40, revision=0x24 [ 2.657610] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.657684] registered taskstats version 1 [ 2.657686] Loading compiled-in X.509 certificates [ 2.659569] Loaded X.509 cert 'Build time autogenerated kernel key: bb47f61258cac00632301b52e2a8f233b15dd287' [ 2.659585] zswap: loaded using pool lzo/zbud [ 2.669179] Key type big_key registered [ 2.670530] Key type trusted registered [ 2.671642] Key type encrypted registered [ 2.671644] AppArmor: AppArmor sha1 policy hashing enabled [ 2.671646] ima: No TPM chip found, activating TPM-bypass! [ 2.671656] evm: HMAC attrs: 0x1 [ 2.671977] Magic number: 13:820:267 [ 2.672101] rtc_cmos 00:02: setting system clock to 2017-04-05 07:16:26 UTC (1491376586) [ 2.672131] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.672131] EDD information not available. [ 2.672168] PM: Hibernation image not present or could not be loaded. [ 2.785401] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.920247] ACPI: Battery Slot [BAT1] (battery present) [ 2.921209] Freeing unused kernel memory: 1552K (ffffffffa2b6a000 - ffffffffa2cee000) [ 2.921210] Write protecting the kernel read-only data: 14336k [ 2.921533] Freeing unused kernel memory: 1376K (ffff88471a4a8000 - ffff88471a600000) [ 2.922021] Freeing unused kernel memory: 272K (ffff88471a9bc000 - ffff88471aa00000) [ 2.926729] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.936568] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.936615] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.936621] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.936627] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.936897] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.936917] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.937708] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.937771] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.937779] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.938032] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.957755] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.960751] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 2.961761] usb 2-5: new full-speed USB device number 2 using xhci_hcd [ 2.963529] sdhci: Secure Digital Host Controller Interface driver [ 2.963530] sdhci: Copyright(c) Pierre Ossman [ 2.964228] hidraw: raw HID events driver (C) Jiri Kosina [ 2.979271] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.979278] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.979459] ahci 0000:00:1f.2: version 3.0 [ 2.979673] r8169 0000:01:00.0 eth0: RTL8105e at 0xffffa220c0cb4000, 00:16:96:e5:31:3a, XID 00a00000 IRQ 45 [ 2.982082] [drm] Initialized drm 1.1.0 20060810 [ 2.989891] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 2.989894] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.990610] scsi host0: ahci [ 2.990905] scsi host1: ahci [ 2.990988] scsi host2: ahci [ 2.991067] scsi host3: ahci [ 2.991114] ata1: SATA max UDMA/133 abar m2048@0xc131c000 port 0xc131c100 irq 46 [ 2.991115] ata2: DUMMY [ 2.991116] ata3: DUMMY [ 2.991116] ata4: DUMMY [ 3.003030] [drm:intel_gvt_init] GVT-g is disabled by kernel params [ 3.003033] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 3.003035] [drm:get_allowed_dc_mask] Allowed DC state mask 00 [ 3.003050] [drm:intel_device_info_dump] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,is_broadwell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 3.003104] [drm:intel_device_info_runtime_init] slice total: 1 [ 3.003104] [drm:intel_device_info_runtime_init] subslice total: 3 [ 3.003105] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 3.003106] [drm:intel_device_info_runtime_init] EU total: 24 [ 3.003107] [drm:intel_device_info_runtime_init] EU per subslice: 8 [ 3.003107] [drm:intel_device_info_runtime_init] has slice power gating: n [ 3.003108] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 3.003109] [drm:intel_device_info_runtime_init] has EU power gating: n [ 3.003110] [drm:intel_sanitize_options] ppgtt mode: 3 [ 3.003135] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K [ 3.003136] [drm] Memory usable by graphics device = 4096M [ 3.003137] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 3.003137] [drm:i915_ggtt_init_hw] GTT stolen size = 32M [ 3.003139] [drm] Replacing VGA console driver [ 3.003161] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cfb3018 [ 3.003165] [drm:intel_opregion_setup] Public ACPI methods supported [ 3.003165] [drm:intel_opregion_setup] SWSCI supported [ 3.009182] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 3.009183] [drm:intel_opregion_setup] ASLE supported [ 3.009183] [drm:intel_opregion_setup] ASLE extension supported [ 3.009184] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 3.009401] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.009401] [drm] Driver supports precise vblank timestamp query. [ 3.009403] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 3.009405] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 189 [ 3.009406] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 3.009407] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 3.010086] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 3.011416] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0) [ 3.011417] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 3.011418] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 3.011420] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 3.011421] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 3.011422] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 3.011423] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 26, level 255 [ 3.011424] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 3.011425] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 3.011426] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 3.011426] [drm:parse_driver_features] DRRS State Enabled:0 [ 3.011428] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 3.011429] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 3.011429] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 3.011430] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 3.011431] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 3.011431] [drm:parse_ddi_port] VBT HDMI level shift for port C: 11 [ 3.011455] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 3.011459] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 3.011460] [drm:intel_power_well_enable] enabling always-on [ 3.011461] [drm:intel_power_well_enable] enabling display [ 3.011758] [drm:intel_fbc_init] Sanitized enable_fbc value: 1 [ 3.011760] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 3.011761] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 3.011762] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 3.011762] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 3.011763] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 3.011764] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 3.011764] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 3.011765] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 3.011765] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 3.011766] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 3.011767] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 3.011767] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 3.011768] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 3.011769] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 3.011769] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 3.011770] [drm:intel_modeset_init] 3 display pipes available. [ 3.011782] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz [ 3.011783] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz [ 3.011784] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz [ 3.011786] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.012093] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 3.012101] [drm:intel_aux_port] using AUX A for port A (VBT) [ 3.012110] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 3.012111] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.012112] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.012113] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.012118] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 3.012121] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 3.012126] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 3.013059] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 40 00 00 01 00 02 00 00 00 00 09 00 [ 3.014780] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 3.015608] [drm:intel_dp_get_dpcd] EDP DPCD : 02 8b 01 [ 3.015609] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 3.015611] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 3.015611] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 3.015612] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 3.023682] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.023683] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 3.023688] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 3.023694] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 3.023700] [drm:intel_hdmi_ddc_pin] Using DDC pin 0x4 for port C (VBT) [ 3.023722] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 3.023723] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled [ 3.023725] [drm:intel_modeset_readout_hw_state] [CRTC:34:pipe C] hw state readout: disabled [ 3.023726] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 3.023726] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 3.023727] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 3.023728] [drm:intel_modeset_readout_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 3.023728] [drm:intel_modeset_readout_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1 [ 3.023729] [drm:intel_modeset_readout_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 3.023732] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DDI A] hw state readout: enabled, pipe A [ 3.023733] [drm:intel_modeset_readout_hw_state] [ENCODER:45:DDI C] hw state readout: disabled, pipe A [ 3.023734] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: enabled [ 3.023735] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-1] hw state readout: disabled [ 3.023742] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff8847ccbcf800 for pipe A [ 3.023743] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 3.023743] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 3.023744] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.023745] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4850712, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.023746] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.023746] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.023746] [drm:intel_dump_pipe_config] requested mode: [ 3.023748] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 3.023748] [drm:intel_dump_pipe_config] adjusted mode: [ 3.023749] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 3.023750] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1968 2000 2080 1080 1083 1088 1112, type: 0x40 flags: 0x9 [ 3.023751] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.023751] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.023752] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.023752] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.023753] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.023753] [drm:intel_dump_pipe_config] ips: 0 [ 3.023754] [drm:intel_dump_pipe_config] double wide: 0 [ 3.023754] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x20000000; dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.023755] [drm:intel_dump_pipe_config] planes on this crtc [ 3.023755] [drm:intel_dump_pipe_config] [PLANE:23:primary A] disabled, scaler_id = 0 [ 3.023756] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 3.023756] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 3.023757] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff8847cca60800 for pipe B [ 3.023758] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.023758] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.023759] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.023760] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.023760] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.023761] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.023761] [drm:intel_dump_pipe_config] requested mode: [ 3.023762] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.023762] [drm:intel_dump_pipe_config] adjusted mode: [ 3.023763] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.023764] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.023765] [drm:intel_dump_pipe_config] port clock: 0 [ 3.023765] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.023766] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.023766] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.023767] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.023767] [drm:intel_dump_pipe_config] ips: 0 [ 3.023767] [drm:intel_dump_pipe_config] double wide: 0 [ 3.023768] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x0; dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.023768] [drm:intel_dump_pipe_config] planes on this crtc [ 3.023769] [drm:intel_dump_pipe_config] [PLANE:28:primary B] disabled, scaler_id = 0 [ 3.023769] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = 0 [ 3.023770] [drm:intel_dump_pipe_config] [PLANE:31:sprite B] disabled, scaler_id = 0 [ 3.023771] [drm:intel_dump_pipe_config] [CRTC:34:pipe C][setup_hw_state] config ffff8847cca65000 for pipe C [ 3.023771] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 3.023771] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.023772] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.023773] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.023773] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.023774] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.023774] [drm:intel_dump_pipe_config] requested mode: [ 3.023775] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.023775] [drm:intel_dump_pipe_config] adjusted mode: [ 3.023776] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.023777] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.023777] [drm:intel_dump_pipe_config] port clock: 0 [ 3.023778] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.023778] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.023779] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.023779] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.023780] [drm:intel_dump_pipe_config] ips: 0 [ 3.023780] [drm:intel_dump_pipe_config] double wide: 0 [ 3.023781] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x0; dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.023781] [drm:intel_dump_pipe_config] planes on this crtc [ 3.023781] [drm:intel_dump_pipe_config] [PLANE:32:primary C] disabled, scaler_id = 0 [ 3.023782] [drm:intel_dump_pipe_config] [PLANE:33:cursor C] disabled, scaler_id = 0 [ 3.023782] [drm:intel_dump_pipe_config] [PLANE:35:sprite C] disabled, scaler_id = 0 [ 3.023783] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling [ 3.023784] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling [ 3.023787] [drm:intel_power_well_disable] disabling display [ 3.023790] [drm:hsw_set_power_well] Requesting to disable the power well [ 3.023793] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 3.023794] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 3.023797] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 3.023799] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff8847ccb03cc0 [ 3.023854] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 3.023855] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 3.023883] [drm:i915_gem_context_init] LR context support initialized [ 3.023885] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000 [ 3.023887] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=4096 [ 3.023889] [drm:intel_init_pipe_control] render ring pipe control offset: 0xffffe000 [ 3.024094] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 3.024097] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 3.024100] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 3.024103] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 3.024104] [drm:intel_guc_setup] GuC fw status: path (null), fetch NONE, load NONE [ 3.024108] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz [ 3.024126] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 3.024127] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 3.024127] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 3.024128] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 3.024129] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 3.024129] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400) [ 3.024130] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 3.024130] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 3.024130] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 3.024140] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 3.025567] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from unknown to connected [ 3.025568] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 3.025714] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.025715] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.025861] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.025862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.026054] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.026055] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.026248] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.026249] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:HDMI-A-1] status updated from unknown to disconnected [ 3.026507] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 3.026510] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [ 3.027717] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 3.029875] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.030217] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.030347] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0 [ 3.030370] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 3.030371] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 3.031242] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.031244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 3.031255] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 3.031256] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 3.031257] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 3.031258] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 3.031408] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.031409] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.031581] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.031582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.031753] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.031754] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.031927] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)! [ 3.031937] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.031939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 3.031939] [drm:drm_setup_crtcs] [ 3.031941] [drm:drm_enable_connectors] connector 37 enabled? yes [ 3.031941] [drm:drm_enable_connectors] connector 46 enabled? no [ 3.031943] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 3.031944] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 3.031945] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 3.031946] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 3.031947] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 3.031948] [drm:intelfb_create] re-using BIOS fb [ 3.031952] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff8847ccb03cc0 [ 3.032023] fbcon: inteldrmfb (fb0) is primary device [ 3.032112] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 3.032113] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18 [ 3.032115] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.032116] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 3.032117] [drm:intel_dp_compute_config] DP link bw required 249804 available 432000 [ 3.032119] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 3.032121] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff8847d483b000 for pipe A [ 3.032121] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 3.032122] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 3.032123] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.032125] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4850712, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.032126] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.032127] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.032128] [drm:intel_dump_pipe_config] requested mode: [ 3.032130] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 3.032130] [drm:intel_dump_pipe_config] adjusted mode: [ 3.032132] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 3.032134] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1968 2000 2080 1080 1083 1088 1112, type: 0x48 flags: 0x9 [ 3.032135] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.032136] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.032136] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.032137] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.032138] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.032139] [drm:intel_dump_pipe_config] ips: 1 [ 3.032139] [drm:intel_dump_pipe_config] double wide: 0 [ 3.032141] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x20000000; dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.032141] [drm:intel_dump_pipe_config] planes on this crtc [ 3.032143] [drm:intel_dump_pipe_config] [PLANE:23:primary A] enabled [ 3.032145] [drm:intel_dump_pipe_config] FB:49, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 3.032145] [drm:intel_dump_pipe_config] scaler:0 src 0x0+1920+1080 dst 0x0+1920+1080 [ 3.032146] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 3.032147] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 3.032149] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500 [ 3.032153] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A [ 3.032165] [drm:intel_edp_backlight_off] [ 3.103149] usb 2-5: New USB device found, idVendor=8087, idProduct=0a2a [ 3.103151] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110190] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 3.110192] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.110431] hub 1-1:1.0: USB hub found [ 3.110533] hub 1-1:1.0: 8 ports detected [ 3.221773] usb 2-8: new high-speed USB device number 3 using xhci_hcd [ 3.237765] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 3.237767] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [ 3.237774] [drm:intel_disable_pipe] disabling pipe A [ 3.254524] [drm:edp_panel_off] Turn eDP port A panel power off [ 3.254527] [drm:wait_panel_off] Wait for panel power off time [ 3.254534] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 3.254943] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000011, pins 0x00000010 [ 3.254944] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 3.254959] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 3.304996] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.305399] ata1.00: supports DRM functions and may not be fully accessible [ 3.306114] [drm:wait_panel_status] Wait complete [ 3.306122] [drm:intel_disable_shared_dpll] disable LCPLL 1350 (active 1, on? 1) for crtc 26 [ 3.306123] [drm:intel_disable_shared_dpll] disabling LCPLL 1350 [ 3.306126] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 3.306128] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 3.306133] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz [ 3.306134] [drm:verify_encoder_state] [ENCODER:36:DDI A] [ 3.306135] [drm:verify_encoder_state] [ENCODER:45:DDI C] [ 3.306137] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-1] [ 3.306138] [drm:verify_single_dpll_state] WRPLL 1 [ 3.306139] [drm:verify_single_dpll_state] WRPLL 2 [ 3.306140] [drm:verify_single_dpll_state] SPLL [ 3.306140] [drm:verify_single_dpll_state] LCPLL 810 [ 3.306141] [drm:verify_single_dpll_state] LCPLL 1350 [ 3.306141] [drm:verify_single_dpll_state] LCPLL 2700 [ 3.306143] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 26 [ 3.306143] [drm:intel_enable_shared_dpll] enabling LCPLL 1350 [ 3.306761] ata1.00: ATA-10: Crucial_CT250MX200SSD3, MU03, max UDMA/133 [ 3.306762] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.308297] ata1.00: supports DRM functions and may not be fully accessible [ 3.310783] ata1.00: configured for UDMA/133 [ 3.310990] scsi 0:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU03 PQ: 0 ANSI: 5 [ 3.320462] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 [ 3.320463] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 3.320464] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 3.341954] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.341959] ata1.00: Enabling discard_zeroes_data [ 3.341971] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.341972] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.342015] sd 0:0:0:0: [sda] Write Protect is off [ 3.342017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.342050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.342133] ata1.00: Enabling discard_zeroes_data [ 3.343490] sda: sda1 sda2 sda3 [ 3.343640] ata1.00: Enabling discard_zeroes_data [ 3.343709] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.374842] usb 2-8: New USB device found, idVendor=1e4e, idProduct=0110 [ 3.374843] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.374844] usb 2-8: Product: USB2.0 Camera [ 3.374845] usb 2-8: Manufacturer: Etron Technology, Inc. [ 3.613790] tsc: Refined TSC clocksource calibration: 2593.994 MHz [ 3.613795] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns [ 3.869765] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 3.869768] [drm:wait_panel_status] Wait complete [ 3.869772] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 3.869774] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled [ 3.926588] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 [ 3.926590] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 3.926590] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 4.078165] [drm:edp_panel_on] Turn eDP port A panel power on [ 4.078167] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 4.078174] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 4.078176] [drm:wait_panel_status] Wait complete [ 4.078178] [drm:wait_panel_on] Wait for panel power on [ 4.078184] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 4.278449] [drm:wait_panel_status] Wait complete [ 4.279041] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 40 00 00 01 00 02 00 00 00 00 09 00 [ 4.281090] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 4.281923] [drm:intel_dp_get_dpcd] EDP DPCD : 02 8b 01 [ 4.281923] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 4.281925] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 4.281926] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 4.281926] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 4.282754] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.282755] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 4.282755] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 4.285361] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 4.287043] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 4.287221] [drm:intel_enable_pipe] enabling pipe A [ 4.287634] [drm:intel_edp_backlight_on] [ 4.287635] [drm:intel_panel_enable_backlight] pipe A [ 4.287641] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 4.288064] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 4.288067] [drm:intel_fbc_alloc_cfb] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 4.288068] [drm:intel_fbc_enable] Enabling FBC on pipe A [ 4.304104] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 4.304108] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 4.304115] [drm:verify_single_dpll_state] LCPLL 1350 [ 4.304125] [drm:drm_fb_helper_hotplug_event] [ 4.304126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 4.304127] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 4.305000] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.305003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 4.305005] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 4.305008] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 4.305009] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 4.305010] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 4.305165] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.305166] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.305320] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.305321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.305477] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.305478] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.305631] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.305633] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 4.305851] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 4.305853] [drm:drm_setup_crtcs] [ 4.305855] [drm:drm_enable_connectors] connector 37 enabled? yes [ 4.305855] [drm:drm_enable_connectors] connector 46 enabled? no [ 4.305856] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 4.305857] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 4.305861] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 4.305861] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 4.305863] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 4.320829] Console: switching to colour frame buffer device 240x67 [ 4.340620] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.357072] random: fast init done [ 4.413704] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 4.479083] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.567956] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.627519] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.627622] systemd[1]: Detected architecture x86-64. [ 4.627782] systemd[1]: Set hostname to . [ 4.635589] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 4.641669] clocksource: Switched to clocksource tsc [ 4.694845] systemd[1]: mysql.service: Cannot add dependency job, ignoring: Unit mysql.service is masked. [ 4.695438] systemd[1]: Listening on udev Control Socket. [ 4.696328] systemd[1]: Set up automount NAS-tienda.automount. [ 4.696449] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.696471] systemd[1]: Listening on RPCbind Server Activation Socket. [ 4.696505] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.696525] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.740207] lp: driver loaded but no devices found [ 4.743328] ppdev: user-space parallel port driver [ 4.745790] RPC: Registered named UNIX socket transport module. [ 4.745791] RPC: Registered udp transport module. [ 4.745792] RPC: Registered tcp transport module. [ 4.745792] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.764782] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.808916] EXT4-fs (sda2): re-mounted. Opts: nodelalloc,commit=30,barrier=0,i_version,inode_readahead_blks=64,errors=remount-ro [ 4.814597] systemd-journald[329]: Received request to flush runtime journal from PID 1 [ 5.005209] random: crng init done [ 5.033161] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.038311] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.045727] [drm:intel_power_well_enable] enabling display [ 5.045730] [drm:hsw_set_power_well] Enabling power well [ 5.055525] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.055528] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.055529] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.055530] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 5.055531] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 5.055533] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19 [ 5.055534] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18 [ 5.061639] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 5.061707] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 5.062927] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 5.062992] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 5.063050] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 5.069318] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=94/937 [ 5.069320] [drm:intel_panel_actually_set_backlight] set backlight PWM = 180 [ 5.096087] Intel(R) Wireless WiFi driver for Linux [ 5.096089] Copyright(c) 2003- 2015 Intel Corporation [ 5.096252] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 5.096253] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.096253] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.096254] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.096254] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.111545] AVX2 version of gcm_enc/dec engaged. [ 5.111546] AES CTR mode by8 optimization enabled [ 5.147120] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm [ 5.168649] intel_rapl: Found RAPL domain package [ 5.168651] intel_rapl: Found RAPL domain core [ 5.168652] intel_rapl: Found RAPL domain uncore [ 5.168653] intel_rapl: Found RAPL domain dram [ 5.168656] intel_rapl: RAPL package 0 domain package locked by BIOS [ 5.168663] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 5.203360] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x184 [ 5.205497] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5.205817] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5.274797] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.337120] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.712532] Adding 8310780k swap on /dev/sda3. Priority:-1 extents:1 across:8310780k SSFS [ 6.157557] media: Linux media interface: v0.10 [ 6.173662] Linux video capture interface: v2.00 [ 6.200403] Bluetooth: Core ver 2.21 [ 6.200416] NET: Registered protocol family 31 [ 6.200417] Bluetooth: HCI device and connection manager initialized [ 6.200419] Bluetooth: HCI socket layer initialized [ 6.200421] Bluetooth: L2CAP socket layer initialized [ 6.200426] Bluetooth: SCO socket layer initialized [ 6.315502] audit: type=1400 audit(1491376590.137:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=892 comm="apparmor_parser" [ 6.315507] audit: type=1400 audit(1491376590.137:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=892 comm="apparmor_parser" [ 6.316981] audit: type=1400 audit(1491376590.137:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=895 comm="apparmor_parser" [ 6.316997] audit: type=1400 audit(1491376590.137:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=895 comm="apparmor_parser" [ 6.317501] audit: type=1400 audit(1491376590.137:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=893 comm="apparmor_parser" [ 6.317519] audit: type=1400 audit(1491376590.137:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=893 comm="apparmor_parser" [ 6.317522] audit: type=1400 audit(1491376590.141:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=893 comm="apparmor_parser" [ 6.317524] audit: type=1400 audit(1491376590.141:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=893 comm="apparmor_parser" [ 6.323973] audit: type=1400 audit(1491376590.145:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=896 comm="apparmor_parser" [ 6.329670] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1e4e:0110) [ 6.329977] usbcore: registered new interface driver btusb [ 6.334330] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized! [ 6.334332] uvcvideo 2-8:1.0: Entity type for entity Processing 3 was not initialized! [ 6.334333] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized! [ 6.334390] input: USB2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input12 [ 6.334432] usbcore: registered new interface driver uvcvideo [ 6.334433] USB Video Class driver (1.1.1) [ 6.344026] Bluetooth: hci0: read Intel version: 370810011002270d00 [ 6.354081] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq [ 6.478200] [drm:i915_gem_open] [ 6.487252] [drm:i915_gem_open] [ 6.503936] [drm:i915_gem_open] [ 6.514007] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 6.520589] [drm:i915_gem_open] [ 6.650728] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.673654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.673655] Bluetooth: BNEP filters: protocol multicast [ 6.673658] Bluetooth: BNEP socket layer initialized [ 7.453478] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 7.453484] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 7.793899] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 7.810993] NFSD: starting 90-second grace period (net ffffffffa2afbb40) [ 8.131678] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8.133500] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8.133766] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8.197571] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8.197836] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8.217866] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8.220467] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 8.296319] [drm:i915_gem_open] [ 8.368668] [drm:i915_gem_open] [ 8.380668] [drm:i915_gem_open] [ 8.380726] [drm:drm_mode_addfb2] [FB:50] [ 8.432289] r8169 0000:01:00.0 enp1s0: link down [ 8.432340] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 8.549069] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 8.552950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 8.552951] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 8.552956] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 8.552962] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 8.553832] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 8.553835] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 8.553836] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 8.553838] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 8.553914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 8.553915] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 8.554067] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 8.554067] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 8.554214] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 8.554215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 8.554364] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 8.554365] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 8.554509] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 8.554510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 8.554561] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 8.554562] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 8.555419] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 8.555421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 8.555422] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 8.555423] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 8.555869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 8.555870] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 8.556016] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 8.556016] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 8.556159] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 8.556160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 8.556304] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 8.556304] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 8.556448] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 8.556448] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 8.616227] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 8.663723] [drm:drm_mode_addfb2] [FB:52] [ 8.663727] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 8.663730] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 8.697070] [drm:drm_mode_setcrtc] [CRTC:30:pipe B] [ 8.697085] [drm:drm_mode_setcrtc] [CRTC:34:pipe C] [ 8.713763] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 8.713767] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 8.747070] [drm:drm_mode_setcrtc] [CRTC:30:pipe B] [ 8.747084] [drm:drm_mode_setcrtc] [CRTC:34:pipe C] [ 9.288655] [drm:i915_gem_open] [ 11.805264] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 11.805275] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 13.632389] FS-Cache: Loaded [ 13.648280] FS-Cache: Netfs 'nfs' registered for caching [ 13.674346] vboxdrv: loading out-of-tree module taints kernel. [ 13.674539] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 13.678457] vboxdrv: Found 4 processor cores [ 13.690552] NFS: Registering the id_resolver key type [ 13.690559] Key type id_resolver registered [ 13.690560] Key type id_legacy registered [ 13.697139] vboxdrv: TSC mode is Invariant, tentative frequency 2593993345 Hz [ 13.697140] vboxdrv: Successfully loaded version 5.1.6_Ubuntu (interface 0x00260000) [ 13.701521] VBoxNetFlt: Successfully started. [ 13.704901] VBoxNetAdp: Successfully started. [ 13.709290] VBoxPciLinuxInit [ 13.712019] vboxpci: IOMMU not found (not registered) [ 14.376534] [drm:i915_gem_open] [ 14.383754] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 14.391752] [drm:i915_gem_context_create_ioctl] HW context 2 created [ 14.392457] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 14.393117] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 14.393557] [drm:i915_gem_context_destroy_ioctl] HW context 2 destroyed [ 14.394392] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 14.552079] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 14.552081] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 14.552086] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 14.552091] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 14.552974] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 14.552979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 14.552980] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 14.552981] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 14.553163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 14.553164] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 14.553314] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.553315] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.553466] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.553467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 14.553613] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.553614] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.553758] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.553759] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 14.765095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 14.765097] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 14.765967] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 14.765971] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 14.765974] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 14.765976] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 14.766233] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 14.766234] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 14.766384] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.766385] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.766535] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.766538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 14.766692] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.766693] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.766844] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.766846] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 14.767811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 14.767812] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 14.768673] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 14.768676] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 14.768679] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 14.768681] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 14.768904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 14.768905] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 14.769055] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.769056] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.769207] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.769209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 14.769355] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.769356] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.769502] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.769504] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 14.770182] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 14.770183] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 14.771048] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 14.771050] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 14.771053] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 14.771055] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 14.771274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 14.771275] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 14.771425] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.771426] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.771576] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 14.771577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 14.771723] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.771724] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.771869] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 14.771871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 14.919581] Non-volatile memory driver v1.3 [ 15.009349] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.021063] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.022201] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.033055] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.034353] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.039769] ahci 0000:00:1f.2: port does not support device sleep [ 15.045061] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.046408] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.057060] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.058346] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.069118] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.070366] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.081059] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 15.082300] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.093060] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.094409] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.105054] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.106306] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.117051] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 15.121923] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.133033] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 15.260934] Bluetooth: RFCOMM TTY layer initialized [ 15.260940] Bluetooth: RFCOMM socket layer initialized [ 15.260944] Bluetooth: RFCOMM ver 1.11 [ 15.620503] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] [ 15.620505] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 15.621392] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 15.621396] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : [ 15.621399] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1968 2000 2080 1080 1083 1088 1112 0x48 0x9 [ 15.621401] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1968 2000 2080 1080 1083 1088 1112 0x40 0x9 [ 15.621648] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] [ 15.621649] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] [ 15.621799] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.621800] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 15.621951] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 15.621953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 15.622100] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 15.622100] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 15.622247] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 15.622249] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected [ 16.731327] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=122/937 [ 16.731330] [drm:intel_panel_actually_set_backlight] set backlight PWM = 206 [ 17.604846] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 17.605242] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 17.668452] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 17.668860] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 17.682390] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 17.682505] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 17.725023] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 17.812105] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 18.248917] systemd[1]: apt-daily.timer: Adding 4h 1min 3.107167s random time. [ 18.720791] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 18.720803] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 21.440819] [drm:intel_power_well_disable] disabling display [ 21.440825] [drm:hsw_set_power_well] Requesting to disable the power well [ 23.568462] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=281/937 [ 23.568464] [drm:intel_panel_actually_set_backlight] set backlight PWM = 348 [ 24.103665] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=47/937 [ 24.103666] [drm:intel_panel_actually_set_backlight] set backlight PWM = 138 [ 32.098553] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=141/937 [ 32.098555] [drm:intel_panel_actually_set_backlight] set backlight PWM = 223 [ 44.580505] wlp2s0: authenticate with d0:22:be:b7:4a:b0 [ 44.583626] wlp2s0: send auth to d0:22:be:b7:4a:b0 (try 1/3) [ 44.585482] wlp2s0: authenticated [ 44.587129] wlp2s0: associate with d0:22:be:b7:4a:b0 (try 1/3) [ 44.589989] wlp2s0: RX AssocResp from d0:22:be:b7:4a:b0 (capab=0x411 status=0 aid=1) [ 44.591256] wlp2s0: associated [ 44.591289] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 55.056323] systemd[1]: apt-daily.timer: Adding 8h 22min 24.023021s random time. [ 65.183471] systemd[1]: apt-daily.timer: Adding 5h 50min 52.477668s random time. [ 71.303928] [drm:i915_gem_open] [ 71.310952] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 71.311930] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 247.632104] [drm:i915_gem_open] [ 247.640347] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 247.641444] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 260.032843] psmouse serio1: Explorer Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. [ 623.893383] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=281/937 [ 623.893385] [drm:intel_panel_actually_set_backlight] set backlight PWM = 348 [ 750.434769] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=47/937 [ 750.434771] [drm:intel_panel_actually_set_backlight] set backlight PWM = 138 [ 778.377866] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=141/937 [ 778.377867] [drm:intel_panel_actually_set_backlight] set backlight PWM = 223 [ 823.301414] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=47/937 [ 823.301415] [drm:intel_panel_actually_set_backlight] set backlight PWM = 138 [ 838.599972] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=141/937 [ 838.599973] [drm:intel_panel_actually_set_backlight] set backlight PWM = 223 [ 972.676905] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=47/937 [ 972.676906] [drm:intel_panel_actually_set_backlight] set backlight PWM = 138 [ 991.031701] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=141/937 [ 991.031703] [drm:intel_panel_actually_set_backlight] set backlight PWM = 223 [ 1026.941118] psmouse serio1: Explorer Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. [ 1223.953621] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=281/937 [ 1223.953623] [drm:intel_panel_actually_set_backlight] set backlight PWM = 348 [ 1283.360718] psmouse serio1: Explorer Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.